Search Results

Search found 10751 results on 431 pages for 'fast forward'.

Page 179/431 | < Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >

• Server with 3 public IP and iptables

  - by Juan

  I have a linux box with two NIC cards: eth0 and eth1. In one card i have 3 public IP: eth0 = 10.10.10.1, eth0:1= 10.10.10.2 and eth0:2= 10.10.10.3 In the other card i have one local IP eth1 = 192.9.200.1 I want to redirect all the wan traffic for 10.10.10.2 to the LAN 192.9.200.2 and the same for 10.10.10.3 to 192.9.200.3 I have tried with this rule but doesn't work iptables -t nat -A PREROUTING -i eth0 -d 10.10.10.2 -j DNAT --to-destination 192.9.200.2 iptables -t nat -A PREROUTING -i eth0 -d 10.10.10.3 -j DNAT --to-destination 192.9.200.3 IP forward is enabled in /etc/sysctl.conf Can you help me, please.

  Read the article

• Juniper Networks SRX240 as a office router?

  - by Jordan Mendelson

  We're a small (7 person) fast growing startup who just got our new office and we're having a 100 Mbps line installed from Cogent. I'm not familiar with Juniper devices, however the equivalent Cisco appears to be rather expensive. Features we'd like: Offsite VPN access (PPTP or L2TP IPsec) - something Mac compatible IPv6 support NAT - ideally supporting multiple outside addresses mapped to VLANs DHCP DNS forwarding would be nice QoS to keep our SIP phones happy (managed through RingCentral) VLANs for guest/internal The device is going to be connected to a set of SIP phones as well as two Ruckus 7962s for wireless access. Eventually I'd like to connect it to a Juniper ESX switch as we grow. Would a Juniper SRX240 handle this ok?

  Read the article

• Accessing IPv6 router interface from a minimal Fedora installation?

  - by Zack

  I've recently installed Fedora 16 and am trying to set up a simple apache server. The only problem I've run into so far is that I'm unable to access my router's web interface from any box on my network. It assigns addresses via dhcp, and the router always responds to a ping. The server is also picking up an IP from the router on the proper subnet. Now, all I really need to do is forward a port, however I am receiving "Unable to connect" through the web interfaces and "connection refused" via telnet. What are my options, and how might I go about troubleshooting this? Will I need the server's ip to be static in order to change these settings? The router is a "Netopia" model, if that helps.

  Read the article

• Best MTA setup for home or laptop computers - not server

  - by thomasrutter

  Hello, What is a good MTA (e.g. Postfix or something else) setup for a home computer behind a NAT, or a laptop that connects to various different wifi networks? I've read a lot of Postfix tutorials on how to set it up this way or that, but they are usually geared towards computers that are servers ie they have a static IP have a domain name are always connected to the same network My requirements are, I guess: Ability to forward mail for "root" to another server of my choosing. No listening for incoming SMTP connections - outgoing only Ability to route outgoing mail via an external SMTP server with authentication (and perhaps encryption) If not Postfix, I need an MTA which can queue up mails in case it temporarily has no internet connection.

  Read the article

• PowerConnect 2848 , vlan configuration with AP

  - by Francesco

  I need to configure two vlan on an AP connected with a Dell PowerConnect 2848. The first one is up and running (let's say vlan x) , the second one is a completely different network (vlan y) , provided by a Gateway-DHCP wich i have no access, directely Patched (via patch panel) at a secondo AP device. So i cannot just plug this Gateway device on my switch without tagging traffic before, for DHCP collion . I have to solve this problem. I was thinking about tagging the traffic at the port wich I will connect the gateway device with vlan y and then set as trunk (vlanx+y) the AP port. In this way I hope to limit the vlan y traffic ONLY for the ports I selected avoiding the spread of unwanted dhcp calls. But all other ports are Unassigned , so I am not sure they won't forward dhcp (vlan y) traffic. I cannot change the Unassigned state for the vlan x ports cause vlanx is native.

  Read the article

• Fragile XenServer won't create new VDIs anymore

  - by thoiz_vd

  I'm getting increasingly frustrated with XenServer. Currently I'm using 5.6FP1 and it seems to be very fragile. Canceling any VDI-related action almost guarantees trouble. This time I tried to create a new VM using a snapshot for a template, with the fast disk cloning option disabled. It would take much longer than I was able and willing to keep my XenCenter open, so I canceled it. That took ages too, so I had to decide to "Quit Anyway." Since, I seem unable to create any new VDI. New attempts at cloning halt with "The attempt to clone the VDI failed," and creating new VMs based on built-in templates hang at "Provisioning." I'm in need of some advice how to solve this. What I did so far is run a xe vdi-list, which returned nothing odd to me, but I'm no expert. I assume that an incomplete VDI is blocking my Storage Repository somehow, however, how to deal with that remains unclear.

  Read the article

• PHP cgi locks up and times out.

  - by Oli

  I've got a dozen wordpress sites hosted on a nginx/php-cgi setup. After a variable amount of time (usually not that long, and occasionally very fast) PHP locks up and after 2 minutes (the timeout I set in nginx), it get a 504 timeout. I've tried everything I can think of. I've been using an init script to launch php-cgi but I compiled out php-fpm and tried that for a day with various configurations with the same results. I've tried a low number of PHP_FCGI_CHILDREN. I've tried as high as my RAM will let me. I've tried various settings for PHP_FCGI_MAX_REQUESTS. xcache seemed to exacerbate the issue, so I removed it. The server is a VPS but it has over a gig of ram dedicated to it. All suggestions are welcome at this juncture because I'm desperate.

  Read the article

• internet access options in remote area? (read: no comcast,qwest, etc)

  - by freedrull

  Currently I am living in a fairly "remote" area, in the countryside, and cable internet access through the typical companies like comcast and qwest is just not available here. I've been trying to research other options for fast internet access. There are some small cable companies but they currently do not offer broadband access here. I thought about maybe buying a 3g phone with a data plan and doing some sort of tethering, or perhaps getting an android phone and using it as a wireless AP. This would of course depend on 3g being available here. The only other thing I can think of is some sort of satellite internet service, or doing something crazy like adapting wifi over am radio. Anyone have any ideas, at all, short of moving somewhere else?

  Read the article

• Configuring home wireless network

  - by dvanaria

  I'm new to setting up a home wireless network. I have Comcast tv/internet/phone service (modem included) as well as a wireless router. My question is pretty basic. How can I tell the performance of the following parts of the network? 1. incoming internet speed 2. speed of the modem 3. speed of the wireless router I basically want as fast an internet connection as possible, of course, but I'm not sure where to look for the bottleneck (and so, not sure where I can spend some money to speed things up). Right now I'm getting about 36 Mbps (as it shows in Windows). If I run an online speed test (xfinity has one) it shows Average download speed of 14.91 Mbps and Average upload speed of 5.72 Mbps. Thanks for your help.

  Read the article

• How can I get VirtualBox Guest Additions installed in an Ubuntu 9.10 server?

  - by sutch

  I have a freshly installed Ubuntu 9.10 server installed within a VirtualBox VM instance. From the VirtualBox menu bar, I selected Devices: Install Guest Additions... Then performed the following commands: > sudo apt-get install -y build-essential linux-headers-$(uname -r) > sudo mount /dev/cdrom /mnt/ > sudo /mnt/VBoxLinuxAdditions-amd64.run After some successful looking results, the following error is displayed: Installing the Window System drivers ...fail! (Could not find the X.Org or XFree86 Window System.) After restarting, I was looking forward to some UI integration with my host desktop (resize window, not needing to press right-Ctrl to escape the client window, and having copy and paste functionality. Is it possible to install the Guest Additions without the X Window overhead (I plan to only use for shell commands)? If additional packages are required, which ones?

  Read the article

• While in CMD shell, copying files from host OS to guest VM locks files (VMware Player/Workstation)

  - by Malcolm

  We're running the latest versions of VMWare Player and Workstation for Windows. The following behavior is identical across both products. Problem: We open a CMD prompt in our guest OS (XP, Vista, Windows 7) and copy files from our host OS using the standard CMD shell copy command: copy z:\C$\testfiles The copy completes successfully, but from that point forward, all the files that were copied to our guest OS are now LOCKED on our host OS. This does not happen if we use Windows Explorer to copy files - it only happens when files are copied via the CMD shell. As mentioned at the start of this question, this behavior is reproducible in both VMWare Player and VMWare Workstation across multiple machines and multiple guest OS's. I've googled for a workaround, but without success. Any ideas appreciated. Malcolm

  Read the article

• Squid site redirection

  - by AndyM

  I have an internal website that cannot be accessed from some machines on my network, due to the physical location, VPN ,network ranges etc. I would like to install Squid on "in between" network to forward request from the clients that cannot reach the website. The issue is the clients have no ability to connect to www.example.com , but they can reach a network with a squid proxy , which in turn can reach www.example.com What is the correct term I need to research in squid , is it just caching www.example.com or do I need to set the clients to use a URL that gets rewritten ? i.e www.squid-example.com -- www.example.com

  Read the article

• Change programfiles variable on windows

  - by Fire-Dragon-DoL

  I have built a computer for a user that asked me for "speed": an SSD was the obvious solution because what he means by speed is "fast boot time". This solved the problem, however the user is not smart enough to remember that he must install programs on D rather than C (c is the ssd, D is an raid 1 hdd). The only solution that comes in my mind is changing programfiles variable such that will point to D rather than C by default. Otherwise, other solutions are ok but I really can't find anything else at the moment. Does anyone have recommendations for how to accomplish changing the default installation directory in Windows?

  Read the article

• Cannot ping my domain-joined server - Can only ping domain controller - host unreachable

  - by Vazgen

  I have a HyperV Server hosting a Domain Controller VM (192.168.1.50) and another VM (192.168.1.51) joined to this domain. I have: domain controller as DNS server forward lookup zone for the domain with host record for 192.168.1.50 and 192.168.1.51 Windows client has primary DNS server set to 192.168.1.50 and secondary to my ISP I can ping 192.168.1.50 (domain controller) successfully but cannot ping 192.168.1.51 (domain-joined VM) When pinging from Windows client: ping 192.168.1.51 Reply from 192.168.1.129 : Destination host unreachable When pinging from Domain Controller: ping 192.168.1.51 Reply from 192.168.1.50 : Destination host unreachable I have 2 virtual network adapters one PRIVATE for intranet (set to static IP 192.168.1.51) and one PUBLIC for internet with a dynamic IP. I noticed the the PUBLIC one inherited the "mydomain.com" domain subtitle after joining the domain... I don't know what this meant but it seemed more intuitive to me to switch THIS ONE to have the static IP. After I configured that I still could not ping but now I get: ping 192.168.1.51 Request timed out What seems to be the issue, I'm relatively new to networking.

  Read the article

• Duplicate of Certificate Templates does not appear in Certificate Template to Issue

  - by Sean

  I'm following what should be simple instructions to enable LDAP SSL on our domain controller (instructions here). Duplicating the Kerberos certificate is successful however, when attempting to select "Certificate Template to Issue", the created certificate does not appear. What gives? A long time ago, I actually completed this step on a now decommissioned DC with no problem. Our environment is Windows Server 2008 Standard, and we have two domain controllers. Only one has the role of certificate authority. I look forward to any help here, thank you ahead of time.

  Read the article

• AWS forwarding email to a gmail account

  - by user2433617

  So I registered a domain name. I then set up a static webpage using aws (S3 and Rout53). Now what I want to do is forward any email I get from that custom domain name to a personal email address I have set up. I can't seem to figure out how to do this. I have these record sets already: A NS SOA CNAME I believe I have to set up an MX record but not sure how. say I have the custom domain [email protected] and I want to redirect all email to [email protected]. The personal email account is a gmail (google accounts) email address. Thanks.

  Read the article

• Uploading files to https mediawiki

  - by zac

  I am unable to upload files (images) to my mediawiki install. I think it may have something to do with it is being hosted as http secure(HTTPS). I followed carefully the instructions here. I updated write permissions to the /images/ dir drwxrwxrwx 2 apache apache 4096 Apr 13 19:04 images php.ini file_uploads = On In LocalSettings.php $wgEnableUploads = true; $wgFileExtensions = array('png','jpg','jpeg','gif'); When I try to upload it quickly refreshes the page without any errors or any indication anything went wrong, other than how fast it refreshed. When I navigate to the history of uploads it is empty. How can I troubleshoot this. Is it related to the secure http?

  Read the article

• The fastest way to encode image+audio for Youtube from command line?

  - by Pavel Vlasov

  I have an mp3 and image and I want to make a simple clip to upload onto Youtube. Is there a fast solution? If video formats are so bad designed, then maybe it is possible to use a prerendered video-only clip? This works good except it takes as much time as the audio lasts: ffmpeg -loop_input -r ntsc -i "%IMAGE%" -i "%AUDIO%" -r 1 -acodec copy -shortest -re -force_fps "%VIDEO%" This takes a second but results in a black screen video that is successfully played by a desktop video player but not acceptable by Youtube: ffmpeg -i "%IMAGE%" -i "%AUDIO%" -acodec copy "%VIDEO%" Windows 7. Preserving audio quality is preferred over video quality.

  Read the article

• Overriding Debian default groups from LDAP

  - by Ex-Parrot

  This is a thing that has always bothered me: how am I best to handle Debian standard groups for LDAP users? Debian has a number of groups defined by default, e.g. plugdev, audio, cdrom and so on. These control access in standard Debian installs. When I want a user from LDAP to be a member of the `audio' group on all machines they log in to, I've tried a few different things: Adding them to the local group on the machine (this works but is hard to maintain) Creating a group in LDAP with the same name and a different GID then adding the user to that group (breaks reverse / forward GID mapping, doesn't seem to work) Creating a group in LDAP with the same name and same GID and adding the user to that group (doesn't seem to work at all, things don't see the LDAP group members) Creating a group in LDAP with the same name and same GID then removing the local group (this works but upsets Debian's maintenance scripts during upgrades that check for local system sanity) What's the best practice for this scenario?

  Read the article

• NAS + XBMC combination

  - by Hendrik

  I currently own a WD Sharespace and I am not too happy about it. It will freeze constantly and its rather slow. I've been thinking of replacing it. I also own a WD HD Live, and it works like it is supposed to, but recently I've seen XBMC in action and I was quite impressed. I've been wondering lately about the possibility of replacing both products with one new device: a fast reliable nas which I can install XBMC on and is capable of rendering video and has an HDMI out. Do any such devices exist for sale or is the only way to build one from scratch? I've seen HTPC's for sale but I've never seen any of them with a raid setup. I've also read about building your own NAS with freeNAS but those setups dont allow you to run XBMC. Does anyone have experience with this?

  Read the article

• How is the MTU is 65535 in UDP but ethernet does not allow frame size more than 1500 bytes

  - by nikku

  I am using a fast ethernet of 100 Mbps, whose frame size is less than 1500 bytes (1472 bytes for payload as per my textbook). In that, I was able to send and receive a UDP packet of message size 65507 bytes, which means the packet size was 65507 + 20 (IP Header) + 8 (UDP Header) = 65535. If the frame's payload size itself is maximum of 1472 bytes (as per my textbook), how can the packet size of IP be greater than that which here is 65535? I used sender code as char buffer[100000]; for (int i = 1; i < 100000; i++) { int len = send (socket_id, buffer, i); printf("%d\n", len); } Receiver code as while (len = recv (socket_id, buffer, 100000)) { printf("%d\n". len); } I observed that send returns -1 on i > 65507 and recv prints or receives a packet of maximum of length 65507.

  Read the article

• virt-viewer slower than virt-manager when viewing

  - by map7

  I've got a thin client server in which I have a few VM's for users under KVM which I manage through virt-manager. What I've noticed is if I start a VM guest on a thin client using the command 'virt-viewer ' then the guest is painfully slow to move around. However if on the same thin client I start the same guest VM through virt-manager it's fast. What are the differences here? Can I start a VM without having the user load up virt-manager and double click on their VM? Should I be looking at using splice in virt-viewer instead of VNC which is what I currently use?

  Read the article

• SSH via DHCP server

  - by SFault

  I have a DHCP server setup and I can't seem to connect to anything through SSH. When I'm logged in to the server itself, I can SSH. But when I connect any machine to the DHCP server, that machine can SSH but every server I SSH to asks for a password when the normal behavior (when not connected to the DHCP server) does not. Here are the contents of my iptables script that are related to port 22. $IPT -t nat -A PREROUTING -i $LAN -p tcp --dport 22 -j REDIRECT --to-port 22 $IPT -A FORWARD -i $LAN -p tcp --dport 22 -j ACCEPT $IPT -A INPUT -i $LAN -p tcp --dport 22 -j ACCEPT $IPT -A INPUT -i $WAN -p tcp --dport 22 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT $IPT -A INPUT -i $LAN -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT Am I missing something?

  Read the article

• How do I get my laptop's screen brightness settings back?

  - by Mason Wheeler

  From when I bought it up until yesterday, my laptop would dim the screen automatically if you let it sit for long enough, and then if you hit a key or moved the mouse, the brightness would jump back to what you had it at. I enjoy that behavior. It works well. Then I booted it up today, and found that now it will dim the screen automatically if you let it sit for long enough, but it doesn't restore the screen brightness. I have to do that manually, every single time, and it's getting really old really fast. It's an Alienware M17 running Windows 7 64-bit, in case that helps.

  Read the article

• Can't access a local site site on LAN

  - by Dilawar

  I have lighttpd setup on a machine (say ip is 10.107.105.13) with following details. inet addr : 10.107.105.13 Bcast : 10.107.111.255 Mask : 255.255.240.0 I can access my site on this computer by using firefox http://localhost/index.html. Now I am trying to access this site from another computer with following details inet addr : 10.14.42.7 Bcast : 10.14.42.255 Mask : 255.255.255.0 But it says 'access denied'. nmap 10.107.105.13 gives the following output. PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 1234/tcp open hotline 3306/tcp open mysql 9418/tcp open git Following is the output of iptables -L -n -v on 10.107.105.13 141 11207 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 FORWARD and OUTPUT section empty. What is wrong with all this?

  Read the article

< Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >