Search Results

Search found 74760 results on 2991 pages for 'print to file'.

Page 1797/2991 | < Previous Page | 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804  | Next Page >

• Can PaperPort be used to convert a non OCR PDF to OCR PDF?

  - by Senseful

  My scanner came with the following software: ScanSoft PageViewer ScanSoft PaperPort ScanDirect I believe it also comes with a basic version of OmniPage I'm not sure which of these programs is the one that actually performs the OCR. When I scan a document, it can perform OCR on it and convert it to a searchable PDF. Is there any way I can take an existing image or PDF file and run the same OCR engine on it in order to create a searchable PDF?

  Read the article

• how to use vmware converter

  - by user23950

  how do I use vmware converter? I've tried to search google but I can't find any tutorial on how to use it. I just wish to convert my xp installation to a vmware file so that I could use it on vm ware player

  Read the article

• NetDom at Startup

  - by m4tty

  Hi, We have a Bat file running on a pc login to migrate a pc from Domain A to Domain B this works brill but. @ECHO OFF cmd /c netdom move /domain:B %computername% /OU:"OU=Computers" /ud:B Admin /pd:***** /uo:%computername%\administrator /po:***** /uf:A admin /pf:****** We need this to be able to run at PC startup rather than user login. It looks like it runs but doesnt actually do anything. Any help would be brilliant. Thanks

  Read the article

• MMC not starting on Window Server 2003

  - by Mirage

  I have Window 2003 server with AD installed. The file server is used to share the folder across network. However after 1 hour suddenly I can't access my share - it asks me the password and then when I enter it it does not allow me, and say access denied. When I try to open mmc.exe on server it says: The application has failed to start because MS.dll was not loaded How can I fix this problem? Can I re-install MMC?

  Read the article

• What does the filesystem give me?

  - by Alec

  I'm writing a specialised database. It currently sits atop of ext4, with one big file that it reads and writes to. I'm wondering whether it would be worth forgoing the filesystem and reading and writing directly to the device. I already use O_DIRECT, so as far as I can tell it wouldn't require much of a code change. What might the risks, advantages and disadvantages of forgoing the filesystem be? Is it likely to improve performance, or harm it?

  Read the article

• Setting subdomain on Localhost?

  - by RobVious

  I'm trying to test a multi-tenant MVC application (in VS2012) locally by setting a subdomain on localhost. The application is currently running on localhost:5252. I want to access it via both that address, and contoso.localhost:5252. In my hosts file I added the following: 127.0.0.1 contoso.localhost I'm using IISExpress... when I navigate to contoso.localhost locally, I just get the IIS page. What am I doing wrong?

  Read the article

• Mounting ubuntu's root.disk in Windows 7

  - by gAMBOOKa

  I've got Ubuntu 9.10 installed in an NTFS partition. After an update, I started getting kernel panics, so I need to reinstall it. But before I do that, I need to retrieve and backup my home directory. I believe Ubuntu's file system is packaged in the root.disk image. So how do I mount it in Windows?

  Read the article

• Excel Conditional Formatting Escaping a Question Mark

  - by kzh

  I would like to use a conditional formatting rule in an excel file that would color any box with a question mark in it red. It seems that Excel is using a question mark as a wild card and will turn all cells with at least one character in them red. How can i escape the question mark? These don't seem to work: "?" \? '?' ??

  Read the article

• stat command filesize reporting on busybox

  - by datadevil

  I'm trying to write a shell script in busybox to check the filesize of a file. Having read that stat is more reliable then ls, I decided to use that, but somehow when using the following command: stat -c %s filename I get the following output: 559795. This goes for the following 2 files (shown using ls -la): 0 Jan 20 16:32 foo_empty 4 Jan 20 16:32 foo_not_empty Anyone know what's happening there? I can just go back to using ls, but I'm not understanding what's happening here, and that's bothering me..

  Read the article

• QuickLook in Finder not working

  - by Mike Grace

  I recently restored my system from Time Machine and now when I press spacebar to do a quick preview on files it shows me nothing. Doesn't matter what type of file it is, it fails. Any idea what I can do to fix this?

  Read the article

• shell script to start multiple Java programs from a directory at boot

  - by zcourts

  I'm not sure if this is the best approach to this, It's my first time doing all of this (including writing shell scripts). OS: Centos My problem: I want to start multiple shell scripts at boot. One of the shell scripts is to start my own services and 3 others are for third party services. The shell script to start my own services will be looking for jar files. I currently have two services (will change), written in Java. All services are named under convention prefix-service-servicename What I've done: I created the following directory structure /home/username/scripts init.sh boot/ boot/startthirdprtyservice1.sh boot/startthirdprtyservice2.sh boot/startthirdprtyservice3.sh boot/startmyservices.sh /home/username/services prefix-lib-libraryname.jar prefix-lib-libraryname.jar prefix-service-servicename.jar prefix-service-servicename.jar prefix-service-servicename.jar In init.sh I have the following: #!/bin/sh #This scripts run all executable scripts in the boot directory at boot #done by adding this script to the file /etc/rc.d/rc.local #nohup #run-parts /home/username/scripts/boot/* #for each file in the boot dir... # ignore the HUP (hangup) signal for s in ./boot/*;do if [ -x $s ]; then echo "Starting $s" nohup $s & fi done echo "Done starting bootup scripts " echo "\n" In the script boot/startmyservices.sh I have #!/bin/sh fnmatch () { case "$2" in $1) return 0 ;; esac ; return 1 ; } ##sub strin to match for SUBSTRING="prefix-service" for s in /home/username/services/*;do if [ -x $s ]; then #match service in the filename , i.e. only services are started if fnmatch "$SUBSTRING" "$s" ; then echo "Starting $s " nohup $s & fi fi done echo "Done starting Services" echo "\n" Finally: Usually you can stick a program in /etc/rc.d/rc.local for it to be run at boot but I don't think this works in this case, or rather I don't know what to put in there I've just learnt how to do this by reading up a bit so I'm not sure its particularly the best thing to do so any advice is appreciated. When I run init.sh nohup.out contains Starting the thirdparty daemon... thirdparty started... .... but nothing from myservices.sh and my Java services aren't running I'm not sure where to start debugging or what could be going wrong. Edit Found some issues and got it to work, used -x instead of -n to check if the string is none zero, needed the sub string check to also be if [[ $s = $SUBSTRING ]] ; then and this last one was just stupid, missing java -jar in front of $s Still unsure of how to get init.sh to run at boot though

  Read the article

• having trouble with bog standard openldap server db

  - by dingfelder

  I am having trouble getting an "out of the box" openldap server working. The examples on the openldap site stiull refer to the slapd.conf file, but the install does not make that. if I start the server (service slapd start) I do not get any errors, but cannot connect ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1) anyone have a simple howto for v2.4 ? I am on fedora15, installed openldap-servers and clients via yum. I have phpldapadmin installed that I can try and connect with once I can get the command line working

  Read the article

• Convert all short (8.3) paths to long paths in the registry?

  - by Mehrdad

  Running FSUtil 8Dot3Name Scan /v /s C: gives you a list of potential 8.3 paths in the registry that are referring to your file system, but is there any tool that can actually convert those paths to long paths in the registry? I do understand this could break some programs, but I have backups so I'd be willing to give it a try. (I tried to make a tool like this myself, but it's harder than it looks, because of false positives and all the varieties of ways the path could be embedded.)

  Read the article

• Using OpenVPN, yet netflix.com blocks access

  - by user837848

  I have set up an OpenVPN server on a VPS in the USA and configured it to route all clients traffic through it. Everything seems to work fine regarding the VPN connection in gerneral. All ip lookup sites show me the us server's ip address and even hulu.com works(it won't work if you are not in the usa). But for some reason netflix.com says "Sorry, Netflix is not available in your country yet.". So I thought that netflix probably uses some more sophisticated ways to determine your location beyond just your ip address. But I could not find a way to get it to work until I dropped the idea of using a VPN and instead connected to the server via a simple socks tunnel with ssh by running: ssh -D 9999 user@serverip All I had to do was changing the key network.proxy.socks_remote_dns in Firefox from false to true to prevent DNS leaks and setting up the socks proxy. Then I could finally watch netflix.com. As a result I concluded that there is nothing in the browser(or something like system timezone) that tells netflix the location, so it has to have something to do with the OpenVPN config. After that I used tcpdump to log all the traffic on the server's network interface venet0 (OpenVZ VPS), visited netflix.com on the client while first connected to the VPN and then connected via socks tunnel and afterwards compared both outputs. The only thing that caught my eye was that while using the socks tunnel the server mainly used ipv6 to connect to netflix whereas it only used ipv4 when the client was connected to the OpenVPN server. But I don't get how that could make such a difference. So what am I missing? Is there a way to configure OpenVPN to also use ipv6 to connect to a website although there is only an ipv4 connection between the VPS and the client? Here is the server.conf of the OpenVPN server (OpenVZ VPS) local serverip port 443 proto tcp dev tun ca ./easy-rsa2/keys/ca.crt cert ./easy-rsa2/keys/vps1.crt key ./easy-rsa2/keys/vps1.key # This file should be kept secret dh ./easy-rsa2/keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" client-to-client keepalive 10 120 tls-auth ta.key 0 # This file is secret cipher AES-256-CBC comp-lzo max-clients 4 user nobody group nogroup persist-key persist-tun status openvpn-status.log log-append openvpn.log verb 3 iptables forwarding iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o venet0 -j SNAT --to-source serverip (enabled ipv4 forwarding) I have tried everything always on a Win7 and a Debian client with only ipv4 connections and always made sure that they use the correct DNS server (tested with ipleak.net and tcpdump / wireshark). client.conf: client dev tun proto tcp remote serverip 443 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 cipher AES-256-CBC comb-lzo verb 3

  Read the article

• Ubuntu bash command

  - by pedro

  List in long form files in the directory "/ etc" for the file "ETCDIR" and view them, while the monitor sequential manner. how i can do it? with commands tee and more

  Read the article

• Unable to use "Manage Content and Structure" after removing Project server form the SharePoint farm.

  - by Brian

  We're no longer using Office Project Server, and I've removed it from the farm in which it was installed. However, now that it's been removed, I am unable to access the "Manage Content and Structure" link on some of our SharePoint sites. I get an error indicating that SharePoint Failed to find the XML file at location '12\Template\Features\PWSCommitments\feature.xml' Anyone have an idea how to fix this?

  Read the article

• Windows 7 boot manager editor as an option in boot manager

  - by Tomek

  Is there any boot manager editor that I can run in DOS (possibly) before the system will load and edit boot manager itself? I would like to delete, edit VHD's and other files, copying them from the network, changing the names and adding to the manager)? Are there any other boot managers that I can use to boot up Windows 7 and 2008 from VHD file? I would like to have flexibility similar to virtualization w/o performance hit and ability to use all 4 processors on the server (using Windows HPC Server).

  Read the article

• Where does $PATH get set in OS X 10.6 Snow Leopard?

  - by Andrew

  I type echo $PATH on the command line and get /opt/local/bin:/opt/local/sbin:/Users/andrew/bin:/usr/local/bin:/usr/local/mysql/bin:/usr/local/pear/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/opt/local/bin:/usr/local/git/bin I'm wondering where this is getting set since my .bash_login file is empty. I'm particularly concerned that, after installing MacPorts, it installed a bunch of junk in /opt. I don't think that directory even exists in a normal Mac OS X install. Update: Thanks to jtimberman for correcting my echo $PATH statement

  Read the article

• .htaccess time on godaddy

  - by doug

  Hi there I'm trying to run a cakephp application on a godaddy linux account. The problem is that i get the error 500. I've read on cakephp discussion group that i have to edit the .htaccess file. 1) How much do i have to wait until i see the result? 2) More information about this error may be available in the server error log. Where are those servers log on a godaddy linux hosted account?

  Read the article

• Zyxel P-320W: How to connect to my web server using public IP

  - by hvtuananh

  My company's router is Zyxel P-320W and I have a public static IP. I registered a few domains name and point to this IP address. I already setup Virtual Hosts and configured port-forwarding to my internal server and it works well. I can connect to all domains from outside The problem is I cannot connect to my domains from inside One workaround way is modify hosts file to add internal IP for those domains, but my company have many computers and I don't want to setup all PC manually

  Read the article

• Zyxel P-320W: How to connect to my web server using public IP

  - by hvtuananh

  My company's router is Zyxel P-320W and I have a public static IP. I registered a few domains name and point to this IP address. I already setup Virtual Hosts and configured port-forwarding to my internal server and it works well. I can connect to all domains from outside The problem is I cannot connect to my domains from inside One workaround way is modify hosts file to add internal IP for those domains, but my company have many computers and I don't want to setup all PC manually

  Read the article

• rkhunter not using root external email on ubuntu

  - by Zen

  i have installed rkhunter on ubuntu 10.04 LTS when i try to test rkhunter report it doesn't send email to my external root email recipient. i can send email only editing /etc/default/rkhunter by replacing this row REPORT_EMAIL="root" with the desired recipient REPORT_EMAIL="[email protected]" These are my config file settings: /root/.forward [email protected] and /etc/aliases root: [email protected] But it doesn't work with root recipient. Any suggestion?

  Read the article

• Remove "Open with GIMP" from context menu?

  - by Ben

  I recently uninstalled GIMP on my Vista laptop, but there is still an Open with GIMP option on the context menu for most image file types, like JPEG and PNG. Clicking this option results in an error dialog. Is there any way to remove it?

  Read the article

• Deploying Django App with Nginx, Apache, mod_wsgi

  - by JCWong

  I have a django app which can run locally using the standard development environment. I want to now move this to EC2 for production. The django documentation suggests running with apache and mod_wsgi, and using nginx for loading static files. I am running Ubuntu 12.04 on an Ec2 box. My Django app, "ddt", contains a subdirectory "apache" with ddt.wsgi import os, sys apache_configuration= os.path.dirname(__file__) project = os.path.dirname(apache_configuration) workspace = os.path.dirname(project) sys.path.append(workspace) sys.path.append('/usr/lib/python2.7/site-packages/django/') sys.path.append('/home/jeffrey/www/ddt/') os.environ['DJANGO_SETTINGS_MODULE'] = 'ddt.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() I have mod_wsgi installed from apt. My apache/httpd.conf contains NameVirtualHost *:8080 WSGIScriptAlias / /home/jeffrey/www/ddt/apache/ddt.wsgi WSGIPythonPath /home/jeffrey/www/ddt <Directory /home/jeffrey/www/ddt/apache/> <Files ddt.wsgi> Order deny,allow Allow from all </Files> </Directory> Under apache2/sites-enabled <VirtualHost *:8080> ServerName www.mysite.com ServerAlias mysite.com <Directory /home/jeffrey/www/ddt/apache/> Order deny,allow Allow from all </Directory> LogLevel warn ErrorLog /home/jeffrey/www/ddt/logs/apache_error.log CustomLog /home/jeffrey/www/ddt/logs/apache_access.log combined WSGIDaemonProcess datadriventrading.com user=www-data group=www-data threads=25 WSGIProcessGroup datadriventrading.com WSGIScriptAlias / /home/jeffrey/www/ddt/apache/ddt.wsgi </VirtualHost> If I am correct, these 3 files above should correctly allow my django app to run on port 8080. I have the following nginx/proxy.conf file proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; Under nginx/sites-enabled server { listen 80; server_name www.mysite.com mysite.com; access_log /home/jeffrey/www/ddt/logs/nginx_access.log; error_log /home/jeffrey/www/ddt/logs/nginx_error.log; location / { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy.conf; } location /media/ { root /home/jeffrey/www/ddt/; } } If I am correct these two files should setup nginx to take requests on the HTTP port 80, but then direct requests to apache which is running the django app on port 8080. If i go to mysite.com, all I see is Welcome to Nginx! Any advice for how to debug this?

  Read the article

• Looking to use .htaccess to create SEO friendly URLs

  - by Ray

  For SEO purposes, I need someone to modify my .htaccess file. Here's what I need to do: current URL: http://www.abc.com/index.php?page=show_type&ord=1 to new URL: http://www.abc.com/amazing Please note that that if someone types in http://www.abc.com/amazing, they must be served content from the current URL, but the new URL must stay in the address bar. I tried this and it didn't seem to work RewriteEngine On RewriteRule ^/?amazing/([^/]+)/([^/]+)/([^/]+)/([^/]+)/([^/]+)/ /index.php?page=show_type&ord=1

  Read the article

< Previous Page | 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804  | Next Page >