Search Results

Search found 558 results on 23 pages for 'varying'.

Page 18/23 | < Previous Page | 14 15 16 17 18 19 20 21 22 23  | Next Page >

• Best way to migrate export/import from SQL Server to oracle

  - by matao

  Hi guys! I'm faced with needing access for reporting to some data that lives in Oracle and other data that lives in a SQL Server 2000 database. For various reasons these live on different sides of a firewall. Now we're looking at doing an export/import from sql server to oracle and I'd like some advice on the best way to go about it... The procedure will need to be fully automated and run nightly, so that excludes using the SQL developer tools. I also can't make a live link between databases from our (oracle) side as the firewall is in the way. The data needs to be transformed in the process from a star schema to a de-normalised table ready for reporting. What I'm thinking about is writing a monster query for SQL Server (which I mostly have already) that will denormalise and read out the data from SQL Server into a flat file using the sql server equivalent of sqlplus as a scheduled task, dump into a Well Known Location, then on the oracle side have a cron job that copies down the file and loads it with sql loader and rebuilds indexes etc. This is all doable, but very manual. Is there one or a combination of FOSS or standard oracle/SQL Server tools that could automate this for me? the Irreducible complexity is the query on one side and building indexes on the other, but I would love to not have to write the CSV dumping detail or the SQL loader script, just say dump this view out to CSV on one side, and on the other truncate and insert into this table from CSV and not worry about mapping column names and all other arcane sqlldr voodoo... best practices? thoughts? comments? edit: I have about 50+ columns all of varying types and lengths in my dataset, which is why I'd prefer to not have to write out how to generate and map each single column...

  Read the article

• How do I check to see if a scalar has a compiled regex in it with Perl?

  - by Robert P

  Let's say I have a subroutine/method that a user can call to test some data that (as an example) might look like this: sub test_output { my ($self, $test) = @_; my $output = $self->long_process_to_get_data(); if ($output =~ /\Q$test/) { $self->assert_something(); } else { $self->do_something_else(); } } Normally, $test is a string, which we're looking for anywhere in the output. This was an interface put together to make calling it very easy. However, we've found that sometimes, a straight string is problematic - for example, a large, possibly varying number of spaces...a pattern, if you will. Thus, I'd like to let them pass in a regex as an option. I could just do: $output =~ $test if I could assume that it's always a regex, but ah, but the backwards compatibility! If they pass in a string, it still needs to test it like a raw string. So in that case, I'll need to test to see if $test is a regex. Is there any good facility for detecting whether or not a scalar has a compiled regex in it?

  Read the article

• reshaping a data frame into long format in R

  - by user1773115

  I'm struggling with a reshape in R. I have 2 types of error (err and rel_err) that have been calculated for 3 different models. This gives me a total of 6 error variables (i.e. err_1, err_2, err_3, rel_err_1, rel_err_2, and rel_err_3). For each of these types of error I have 3 different types of predivtive validity tests (ie random holdouts, backcast, forecast). I would like to make my data set long so I keep the 4 types of test long while also making the two error measurements long. So in the end I will have one variable called err and one called rel_err as well as an id variable for what model the error corresponds to (1,2,or 3) Here is my data right now: iter err_1 rel_err_1 err_2 rel_err_2 err_3 rel_err_3 test_type 1 -0.09385732 -0.2235443 -0.1216982 -0.2898543 -0.1058366 -0.2520759 random 1 0.16141630 0.8575728 0.1418732 0.7537442 0.1584816 0.8419816 back 1 0.16376930 0.8700738 0.1431505 0.7605302 0.1596502 0.8481901 front 1 0.14345986 0.6765194 0.1213689 0.5723444 0.1374676 0.6482615 random 1 0.15890059 0.7435382 0.1589823 0.7439204 0.1608709 0.7527580 back 1 0.14412360 0.6743928 0.1442039 0.6747684 0.1463520 0.6848202 front and here is what I would like it to look like: iter model err rel_err test_type 1 1 -0.09385732 (#'s) random 1 2 -0.1216982 (#'s) random 1 3 -0.1216982 (#'s) random and on... I've tried playing around with the syntax but can't quite figure out what to put for the time.varying argument Thanks very much for any help you can offer.

  Read the article

• CSS positioning div above another div when not in that order in the HTML

  - by devmode

  Given a template where the HTML cannot be modified because of other requirements, how is it possible to display a div above another div when they are not in that order in the HTML and both divs contain data that could produce a varying height and width. HTML: <div id="wrapper"     <div id="firstDiv"         Content to be below in this situation     </div     <div id="secondDiv"         Content to be above in this situation     </div </div Other elements Hopefully it is obvious that the desired result is: Content to be above in this situation Content to be below in this situation Other elements When the dimensions are fixed it easy to position them where needed, but I need some ideas for when the content is variable. For the sake of this scenario, please just consider the width to be 100% on both. Edit: A CSS solution is the most ideal solution. Thank you for the Javascript options mentioned. Without getting too wordy about what or why (or who) ... I am specifically looking for a CSS only solution (and it will probably have to be met with other solutions if that doesn't pan out). One more ... there are other elements following this. A good suggestion was mentioned given the limited scenario I demonstrated -- given that it might be the best answer, but I am looking to also make sure elements following this aren't impacted.

  Read the article

• Out-of-memory algorithms for addressing large arrays

  - by reve_etrange

  I am trying to deal with a very large dataset. I have k = ~4200 matrices (varying sizes) which must be compared combinatorially, skipping non-unique and self comparisons. Each of k(k-1)/2 comparisons produces a matrix, which must be indexed against its parents (i.e. can find out where it came from). The convenient way to do this is to (triangularly) fill a k-by-k cell array with the result of each comparison. These are ~100 X ~100 matrices, on average. Using single precision floats, it works out to 400 GB overall. I need to 1) generate the cell array or pieces of it without trying to place the whole thing in memory and 2) access its elements (and their elements) in like fashion. My attempts have been inefficient due to reliance on MATLAB's eval() as well as save and clear occurring in loops. for i=1:k [~,m] = size(data{i}); cur_var = ['H' int2str(i)]; %# if i == 1; save('FileName'); end; %# If using a single MAT file and need to create it. eval([cur_var ' = cell(1,k-i);']); for j=i+1:k [~,n] = size(data{j}); eval([cur_var '{i,j} = zeros(m,n,''single'');']); eval([cur_var '{i,j} = compare(data{i},data{j});']); end save(cur_var,cur_var); %# Add '-append' when using a single MAT file. clear(cur_var); end The other thing I have done is to perform the split when mod((i+j-1)/2,max(factor(k(k-1)/2))) == 0. This divides the result into the largest number of same-size pieces, which seems logical. The indexing is a little more complicated, but not too bad because a linear index could be used. Does anyone know/see a better way?

  Read the article

• filling colors on a map - PHP

  - by jeremy

  I am trying to determine how to fill colors onto a map - such as the "Risk" board game map. I've done this before with HTML tables, by pulling an HTML color code from a SQL table and then just using it to fill the cell the color I want it. But for a non-square map, I'm not sure where to look. I have created a very simple two color map - its white with black borders. My desired result is having the 'regions' on the map shaded with a color, based on data in a sql table (just like the "fill" button in Paint). This looks like what I need: http://php.net/manual/en/function.imagefilltoborder.php and now.. how to define the borders... At the moment I have tried nothing, because the question was: how do I have PHP fill parts of an image? I have tried making an image in Paint, and then scratching my head wondering how to fill parts of it. Having stumbled upon a link, let me focus this a bit more: It appears that with imagefilltoborder that I can put an image on my server, perhaps one that looks like a black and white version of the RISK map - black borders and white everything else. Some questions: Is it correct that the 'border' variable should use the color of my border (whatever value black is) so that the code can "see" where the border is? Is it correct that I'll just need to figure out X,Y coords to begin the fill? Does this work if I have 10 different spots to fill on the map? Can I use varying colors from code or pulled from SQL to assign different colors to those 10 spots, and use 10 different X,Y coords to get them all?

  Read the article

• How do I check if a scalar has a compiled regex in it with Perl?

  - by Robert P

  Let's say I have a subroutine/method that a user can call to test some data that (as an example) might look like this: sub test_output { my ($self, $test) = @_; my $output = $self->long_process_to_get_data(); if ($output =~ /\Q$test/) { $self->assert_something(); } else { $self->do_something_else(); } } Normally, $test is a string, which we're looking for anywhere in the output. This was an interface put together to make calling it very easy. However, we've found that sometimes, a straight string is problematic - for example, a large, possibly varying number of spaces...a pattern, if you will. Thus, I'd like to let them pass in a regex as an option. I could just do: $output =~ $test if I could assume that it's always a regex, but ah, but the backwards compatibility! If they pass in a string, it still needs to test it like a raw string. So in that case, I'll need to test to see if $test is a regex. Is there any good facility for detecting whether or not a scalar has a compiled regex in it?

  Read the article

• Domain validates but won't save

  - by marko

  I have the following setup. Class, say, Car that has a CarPart (belongsTo=[car:Car]). When I'm creating a Car I also want to create som default CarParts, so I do def car = new Car(bla bla bla) def part = new CarPart(car:car) Now, when I do car.validate() or part.validate() it seems fine. But when I do if(car.save && part.save() I get this exception: 2012-03-24 14:02:21,943 [http-8080-4] ERROR util.JDBCExceptionReporter - Batch entry 0 insert into car_part (version, car_id, id) values ('0', '297', '298') was aborted. Call getNextException to see the cause. 2012-03-24 14:02:21,943 [http-8080-4] ERROR util.JDBCExceptionReporter - ERROR: value too long for type character varying(6) 2012-03-24 14:02:21,943 [http-8080-4] ERROR events.PatchedDefaultFlushEventListener - Could not synchronize database state with session org.hibernate.exception.DataException: Could not execute JDBC batch update Stacktrace follows: java.sql.BatchUpdateException: Batch entry 0 insert into car_part (version, deal_id, id) values ('0', '297', '298') was aborted. Call getNextException to see the cause. at org.postgresql.jdbc2.AbstractJdbc2Statement$BatchResultHandler.handleError(AbstractJdbc2Statement.java:2621) at org.postgresql.core.v3.QueryExecutorImpl.processResults(QueryExecutorImpl.java:1837) at org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExecutorImpl.java:407) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeBatch(AbstractJdbc2Statement.java:2754) at $Proxy20.flush(Unknown Source) at ristretto.DealController$_closure5.doCall(DealController.groovy:109) at ristretto.DealController$_closure5.doCall(DealController.groovy) at java.lang.Thread.run(Thread.java:722) Any ideas?

  Read the article

• How to get a debug flow of execution in C++

  - by Rich

  Hi, I work on a global trading system which supports many users. Each user can book,amend,edit,delete trades. The system is regulated by a central deal capture service. The deal capture service informs all the user of any updates that occur. The problem comes when we have crashes, as the production environment is impossible to re-create on a test system, I have to rely on crash dumps and log files. However this doesn't tell me what the user has been doing. I'd like a system that would (at the time of crashing) dump out a history of what the user has been doing. Anything that I add has to go into the live environment so it can't impact performance too much. Ideas wise I was thinking of a MACRO at the top of each function which acted like a stack trace (only I could supply additional user information, like trade id's, user dialog choices, etc ..) The system would record stack traces (on a per thread basis) and keep a history in a cyclic buffer (varying in size, depending on how much history you wanted to capture). Then on crash, I could dump this history stack. I'd really like to hear if anyone has a better solution, or if anyone knows of an existing framework? Thanks Rich

  Read the article

• How to specify multiple values in where with AR query interface in rails3

  - by wkhatch

  Per section 2.2 of rails guide on Active Record query interface here: which seems to indicate that I can pass a string specifying the condition(s), then an array of values that should be substituted at some point while the arel is being built. So I've got a statement that generates my conditions string, which can be a varying number of attributes chained together with either AND or OR between them, and I pass in an array as the second arg to the where method, and I get: ActiveRecord::PreparedStatementInvalid: wrong number of bind variables (1 for 5) which leads me to believe I'm doing this incorrectly. However, I'm not finding anything on how to do it correctly. To restate the problem another way, I need to pass in a string to the where method such as "table.attribute = ? AND table.attribute1 = ? OR table.attribute1 = ?" with an unknown number of these conditions anded or ored together, and then pass something, what I thought would be an array as the second argument that would be used to substitute the values in the first argument conditions string. Is this the correct approach, or, I'm just missing some other huge concept somewhere and I'm coming at this all wrong? I'd think that somehow, this has to be possible, short of just generating a raw sql string.

  Read the article

• Determine asymmetric latencies in a network

  - by BeeOnRope

  Imagine you have many clustered servers, across many hosts, in a heterogeneous network environment, such that the connections between servers may have wildly varying latencies and bandwidth. You want to build a map of the connections between servers my transferring data between them. Of course, this map may become stale over time as the network topology changes - but lets ignore those complexities for now and assume the network is relatively static. Given the latencies between nodes in this host graph, calculating the bandwidth is a relative simply timing exercise. I'm having more difficulty with the latencies - however. To get round-trip time, it is a simple matter of timing a return-trip ping from the local host to a remote host - both timing events (start, stop) occur on the local host. What if I want one-way times under the assumption that the latency is not equal in both directions? Assuming that the clocks on the various hosts are not precisely synchronized (at least that their error is of the the same magnitude as the latencies involved) - how can I calculate the one-way latency? In a related question - is this asymmetric latency (where a link is quicker in direction than the other) common in practice? For what reasons/hardware configurations? Certainly I'm aware of asymmetric bandwidth scenarios, especially on last-mile consumer links such as DSL and Cable, but I'm not so sure about latency. Added: After considering the comment below, the second portion of the question is probably better off on serverfault.

  Read the article

• TCP/IP RST being sent differently in different browsers.

  - by Brian

  On Mac OS X (10.6), if I start a YouTube video download and pull the Ethernet cable for 5 or so seconds, then plug it back in, I get varying results depending on the browser. With Opera and Chrome, after I plug the cable back in the video continues to load. But with Safari and Firefox, it never does. Using Wireshark to look at the traffic, I found that Opera and Chrome simply ACK the first packet from YouTube after the cable has been plugged back in, but Safari and Firefox set the RST flag (0x4) in the TCP header and no more traffic follows. I can put a HUB in between the machine and the internet connection, the problem goes away and all four browsers continue loading the video when the cable is plugged back into the HUB. Again, looking at the Wireshark logs, it's evident that the machine doesn't see the Mulitcast connection close and there is simply a delay in the packets flowing through. So it seems that if Safari and Firefox sees a Multicast connection close, and then later see data on that same connection, they will send a RST. My question is why? What is the correct course of action, and why are 2/4 browsers doing it one way, while the other 2/4 are doing it another way? Is there somewhere in the code that I can see where this is happening in Firefox, for instance? Thank you very much.

  Read the article

• How do I efficiently parse a CSV file in Perl?

  - by Mike

  I'm working on a project that involves parsing a large csv formatted file in Perl and am looking to make things more efficient. My approach has been to split() the file by lines first, and then split() each line again by commas to get the fields. But this suboptimal since at least two passes on the data are required. (once to split by lines, then once again for each line). This is a very large file, so cutting processing in half would be a significant improvement to the entire application. My question is, what is the most time efficient means of parsing a large CSV file using only built in tools? note: Each line has a varying number of tokens, so we can't just ignore lines and split by commas only. Also we can assume fields will contain only alphanumeric ascii data (no special characters or other tricks). Also, i don't want to get into parallel processing, although it might work effectively. edit It can only involve built-in tools that ship with Perl 5.8. For bureaucratic reasons, I cannot use any third party modules (even if hosted on cpan) another edit Let's assume that our solution is only allowed to deal with the file data once it is entirely loaded into memory. yet another edit I just grasped how stupid this question is. Sorry for wasting your time. Voting to close.

  Read the article

• Looking for MSSQL Table Design Sanity Check for Profile Tables with Dynamic Columns.

  - by Code Sherpa

  I just want a general sanity check regarding database design. We are building a web system that has both Teachers and Students. Both have accounts in the system. Both have profiles in the system. My question is about the table design of those Profile tables. The Teacher profile is pretty static regarding the metadata associated with it. Each teacher has a set number of fields that exposes information about that individual (schools, degrees, etc). The students, however, are a different case. We are using a windows service to pull varying data about the students from an endless stream of excel spreadsheets. The data gets moved into our database and then the fields appear in association with the student's profile. Accordingly, each and every student may have very different fields in their profile. I originally started with the concept of three tables: Accounts ---------- AccountID TeacherProfiles ---------- TeacherProfileID AccountID SecondarySchool University YearsTeaching Etc... StudentProfiles ---------- StudentProfileID AccountID Header Value The StudentProfiles table would hold the name of the column headers from the excel spreadsheets and the associated values. I have since evolved the design a little to treat Profiles more generically per the attached ERD image. The Teacher and Student "Headers" are stored in a table called "ProfileAttributeTypes" and responses (either from the excel document or via input fields on the web form) are put in a ProfileAttributes table. This way both Student and Teacher profiles can be associated with a dynamic flow of profile fields. The "Permissions" table tells us whether we are dealing with a Student or a Teacher. Since this system is likely to grow quickly, I want to make sure the foundation is solid. Can you please provide feedback about this design and let me know if it seems sound or if you could see problems it might create and, if so, what might be a better approach? Thanks in advance.

  Read the article

• C# generics with MVVM, pulling the T out of <T>

  - by bufferz

  My Model is a generic class that contains a (for example) Value property which can be int, float, string, bool, etc. So naturally this class is represented something like Model<T>. For the sake of collections Model<T> implements the interface IModel, although IModel is itself empty of any content. My ViewModel contains and instance of Model<T> and it is passed in through ViewModel's constructor. I still want to know what T is in ViewModel, so when I expose Model to the View I know the datatype of Model's buried Value property. The class for ViewModel ends up looking like the following: class ViewModel<T> { private Model<T> _model; public ViewModel(Model<T> model) { ....blah.... } public T ModelsValue {get; set; } } This works fine, but is limited. So now I need to expose a collection of IModels with varying Ts to my View, so I'm trying to set up an ObservableCollection of new ViewModel<T>s to a changing list of IModels. The problem is, I can't figure out how to get T from Model<T> from IModel to construct ViewModel<T>(Model<T>) at runtime. In the VS2010 debugger I can mouseover any IModel object and see its full Model<int> for example at runtime so I know the data is in there. Any ideas?

  Read the article

• WebGL pass array shader

  - by user987058

  I'm new to WebGL and I'm facing some problems of the shaders. I wanna do multiple light sources in the scene. I searched online and knew that in WebGL, you can't pass an array into the fragment shader, so the only way is use the texture. Here is the problem I can't figure out. First, I create a 32x32 texture using the following code: var pix = []; for(var i=0;i<32;i++) { for(var j=0;j<32;j++) pix.push(0.8,0.8,0.1); } gl.activeTexture(gl.TEXTURE0); gl.bindTexture(gl.TEXTURE_2D, lightMap); gl.pixelStorei(gl.UNPACK_ALIGNMENT,1); gl.texImage2D(gl.TEXTURE_2D, 0, gl.RGB, 32,32,0, gl.RGB, gl.UNSIGNED_BYTE,new Float32Array(pix)); gl.texParameteri(gl.TEXTURE_2D, gl.TEXTURE_MAG_FILTER, gl.LINEAR); gl.texParameteri(gl.TEXTURE_2D, gl.TEXTURE_MIN_FILTER, gl.LINEAR); gl.uniform1i(g_loader.program.set_uniform["u_texture2"],0); But however, when I tried to access the texture in the shader: [Fragment Shader] varying vec2 v_texcoord; uniform sampler2D u_texture2; void main(void) { vec3 lightLoc = texture2D(u_texture, v_texcoord).rgb; gl_FragData[0] = vec4(lightLoc,1.0); } The result is totally black. Is there anyone knows how to acces or create the texture correctly?

  Read the article

• How to style "form" field labels in Windows Phone 7?

  - by Jeremy Bell

  Is there any standards guidance on how to style field labels next to form fields in windows phone 7 silverlight applications? For example, let's say I have a StackPanel with the TextBlock label and a TextBox for data entry. Currently I am using the default TextBlock Margin included in the PhoneTextSubtleStyle ("12,0,12,0"), and using a Margin of "0,-12,0,0" to push the TextBox up closer to the label: <StackPanel HorizontalAlignment="Left"> <TextBlock VerticalAlignment="Center" Text="Name" Style="{StaticResource PhoneTextSubtleStyle}" /> <TextBox Text="{Binding ItemName, Mode=TwoWay}" TextChanged="TextBox_TextChanged" VerticalAlignment="Center" Width="433" Margin="0,-12,0,0" /> </StackPanel> Note that the TextBox seems to have some internal padding of 12 pixels to the left and right, so that the TextBlock label and the TextBox control visually line up perfectly on the left. The problem is, I see existing apps with widely varying conventions for field label styling. Some do not do the negative margin adjustment, like I have above. Some don't. Some appear to override the label TextBlock Margin so that it is indented an additional 12 pixels on the left (i.e. "24,0,12,0" instead of the default "12,0,12,0"). Some apps put the labels to the left of the fields themselves (I hate that). Is there some standard design guidance on field labels in Windows Phone 7? I read through the design template PDF and could only determine that the field labels should be upper case on the first word (preferably only one word labels), and should NOT have a colon at the end. I didn't see anything with regards to margins or alignment between the label and the field.

  Read the article

• Parallelize or vectorize all-against-all operation on a large number of matrices?

  - by reve_etrange

  I have approximately 5,000 matrices with the same number of rows and varying numbers of columns (20 x ~200). Each of these matrices must be compared against every other in a dynamic programming algorithm. In this question, I asked how to perform the comparison quickly and was given an excellent answer involving a 2D convolution. Serially, iteratively applying that method, like so list = who('data_matrix_prefix*') H = cell(numel(list),numel(list)); for i=1:numel(list) for j=1:numel(list) if i ~= j eval([ 'H{i,j} = compare(' char(list(i)) ',' char(list(j)) ');']); end end end is fast for small subsets of the data (e.g. for 9 matrices, 9*9 - 9 = 72 calls are made in ~1 s). However, operating on all the data requires almost 25 million calls. I have also tried using deal() to make a cell array composed entirely of the next element in data, so I could use cellfun() in a single loop: # who(), load() and struct2cell() calls place k data matrices in a 1D cell array called data. nextData = cell(k,1); for i=1:k [nextData{:}] = deal(data{i}); H{:,i} = cellfun(@compare,data,nextData,'UniformOutput',false); end Unfortunately, this is not really any faster, because all the time is in compare(). Both of these code examples seem ill-suited for parallelization. I'm having trouble figuring out how to make my variables sliced. compare() is totally vectorized; it uses matrix multiplication and conv2() exclusively (I am under the impression that all of these operations, including the cellfun(), should be multithreaded in MATLAB?). Does anyone see a (explicitly) parallelized solution or better vectorization of the problem?

  Read the article

• vectorize is indeterminate

  - by telliott99

  I'm trying to vectorize a simple function in numpy and getting inconsistent behavior. I expect my code to return 0 for values < 0.5 and the unchanged value otherwise. Strangely, different runs of the script from the command line yield varying results: sometimes it works correctly, and sometimes I get all 0's. It doesn't matter which of the three lines I use for the case when d <= T. It does seem to be correlated with whether the first value to be returned is 0. Any ideas? Thanks. import numpy as np def my_func(d, T=0.5): if d > T: return d #if d <= T: return 0 else: return 0 #return 0 N = 4 A = np.random.uniform(size=N**2) A.shape = (N,N) print A f = np.vectorize(my_func) print f(A) $ python x.py [[ 0.86913815 0.96833127 0.54539153 0.46184594] [ 0.46550903 0.24645558 0.26988519 0.0959257 ] [ 0.73356391 0.69363161 0.57222389 0.98214089] [ 0.15789303 0.06803493 0.01601389 0.04735725]] [[ 0.86913815 0.96833127 0.54539153 0. ] [ 0. 0. 0. 0. ] [ 0.73356391 0.69363161 0.57222389 0.98214089] [ 0. 0. 0. 0. ]] $ python x.py [[ 0.37127366 0.77935622 0.74392301 0.92626644] [ 0.61639086 0.32584431 0.12345342 0.17392298] [ 0.03679475 0.00536863 0.60936931 0.12761859] [ 0.49091897 0.21261635 0.37063752 0.23578082]] [[0 0 0 0] [0 0 0 0] [0 0 0 0] [0 0 0 0]]

  Read the article

• How can I layout a sidebar or pullquote?

  - by Rich

  I have 4 divs in a fixed width layout: a, b, c, and d, and they are ordered in the html like this: <div id="a"> </div> <div id="b"> </div> <div id="c"> </div> <div id="d"> </div> Using CSS, I want them to be laid out with divs a, b, and d in a vertical column, and div c to the right of and top-aligned with div b, like this: aaa aaa aaa bbbccc bbbccc bbbccc ddd ddd ddd I need this layout to work even though the divs contain unknown content, and so could be of varying length: aaa aaa aaa bbbccc bbbccc dddccc dddccc ddd or: aaa aaa aaa bbbccc bbb bbb ddd ddd ddd or even (if possible): aaa aaa bbbccc dddccc eeeccc eee I can't simply float div c to the right and then move it up, because, without using Javascript, I don't know the height of div b, and so don't know how much to move it up by. Is this possible in HTML and CSS, without reordering the divs?

  Read the article

• C++: Vector of objects vs. vector of pointers to new objects?

  - by metamemetics

  Hello, I am seeking to improve my C++ skills by writing a sample software renderer. It takes objects consisting of points in a 3d space and maps them to a 2d viewport and draws circles of varying size for each point in view. Which is better: class World{ vector<ObjectBaseClass> object_list; public: void generate(){ object_list.clear(); object_list.push_back(DerivedClass1()); object_list.push_back(DerivedClass2()); or... class World{ vector<ObjectBaseClass*> object_list; public: void generate(){ object_list.clear(); object_list.push_back(new DerivedClass1()); object_list.push_back(new DerivedClass2()); ?? Would be using pointers in the 2nd example to create new objects defeat the point of using vectors, because vectors automatically call the DerivedClass destructors in the first example but not in the 2nd? Are pointers to new objects necessary when using vectors because they handle memory management themselves as long as you use their access methods? Now let's say I have another method in world: void drawfrom(Viewport& view){ for (unsigned int i=0;i<object_list.size();++i){ object_list.at(i).draw(view); } } When called this will run the draw method for every object in the world list. Let's say I want derived classes to be able to have their own versions of draw(). Would the list need to be of pointers then in order to use the method selector (-) ?

  Read the article

• Python - How to wake up a sleeping process- multiprocessing?

  - by user1162512

  I need to wake up a sleeping process ? The time (t) for which it sleeps is calculated as t = D/S . Now since s is varying, can increase or decrease, I need to increase/decrease the sleeping time as well. The speed is received over a UDP procotol. So, how do I change the sleeping time of a process, keeping in mind the following:- If as per the previous speed `S1`, the time to sleep is `(D/S1)` . Now the speed is changed, it should now sleep for the new time,ie (D/S2). Since, it has already slept for D/S1 time, now it should sleep for D/S2 - D/S1. How would I do it? As of right now, I'm just assuming that the speed will remain constant all throughout the program, hence not notifying the process. But how would I do that according to the above condition? def process2(): p = multiprocessing.current_process() time.sleep(secs1) # send some packet1 via UDP time.sleep(secs2) # send some packet2 via UDP time.sleep(secs3) # send some packet3 via UDP Also, as in threads, 1) threading.activeCount(): Returns the number of thread objects that are active. 2) threading.currentThread(): Returns the number of thread objects in the caller's thread control. 3) threading.enumerate(): Returns a list of all thread objects that are currently active. What are the similar functions for getting activecount, enumerate in multiprocessing?

  Read the article

• wxpython - Running threads sequentially without blocking GUI

  - by ryantmer

  I've got a GUI script with all my wxPython code in it, and a separate testSequences module that has a bunch of tasks that I run based on input from the GUI. The tasks take a long time to complete (from 20 seconds to 3 minutes), so I want to thread them, otherwise the GUI locks up while they're running. I also need them to run one after another, since they all use the same hardware. (My rationale behind threading is simply to prevent the GUI from locking up.) I'd like to have a "Running" message (with varying number of periods after it, i.e. "Running", "Running.", "Running..", etc.) so the user knows that progress is occurring, even though it isn't visible. I'd like this script to run the test sequences in separate threads, but sequentially, so that the second thread won't be created and run until the first is complete. Since this is kind of the opposite of the purpose of threads, I can't really find any information on how to do this... Any help would be greatly appreciated. Thanks in advance! gui.py import testSequences from threading import Thread #wxPython code for setting everything up here... for j in range(5): testThread = Thread(target=testSequences.test1) testThread.start() while testThread.isAlive(): #wait until the previous thread is complete time.sleep(0.5) i = (i+1) % 4 self.status.SetStatusText("Running"+'.'*i) testSequences.py import time def test1(): for i in range(10): print i time.sleep(1) (Obviously this isn't the actual test code, but the idea is the same.)

  Read the article

• LINQ Expression - Dynamic From & Where Clause

  - by chillydk147

  I have the following list of integers that I need to extract varying lists of integers containing numbers from say 2-4 numbers in count. The code below will extract lists with only 2 numbers. var numList = new List<int> { 5, 20, 1, 7, 19, 3, 15, 60, 3, 21, 57, 9 }; var selectedNums = (from n1 in numList from n2 in numList where (n1 > 10) && (n2 > 10) select new { n1, n2 }).ToList(); Is there any way to build up this Linq expression dynamically so that if I wanted lists of 3 numbers it would be compiled as below, this would save me having to package the similar expression inside a different method. var selectedNums = (from n1 in numList from n2 in numList from n3 in numList where (n1 > 10) && (n2 > 10) && (n3 > 10) select new { n1, n2, n3 }).ToList();

  Read the article

• JVM terminated. Exit code = -1

  - by Lex

  Hello, I've been using Eclipse for some time already, and I didn't have any problems with it. However, when I tried to generate some javadoc, I found that I didn't have the SDK installed. I installed jdk 6u23, and from then on, Eclipse hasn't been working. At first it told me it couldn't find a JRE/SDK. After copying and placing the JRE in the Eclipse folder, the error changed to this: http://i258.photobucket.com/albums/hh261/magical_7/Eclipse.png I've searched around for some solutions, and found a few of varying nature. However, none of them seemed to work. I've tried emptying my eclipse.ini file without success. Altering some values in eclipse.ini didn't work either. Installing Java SDK 1.5 didn't work. Does anyone have other possible solutions? Update: I tried reinstalling Eclipse, but it didn't fix the problem. I did notice that it's a 32bit version, while I'm running a 64bit system. However, if this were to be the problem, I find it strange that it hasn't been an issue earlier.

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23  | Next Page >