commit protocol - Page 180

Troubleshoot port forwarding. Could it be ISP blocking incoming connections?

- by Gravy

Had a new Axis IP camera delivered yesterday. Plugged into Cisco E2400 Wireless Router but having problems. Example topology: WAN IP: 10.10.10.10 (example) Cisco Router: 192.168.1.1 Axis Camera: 192.168.1.10:80 Port forwarding rules set up on router External Port: 999 Internal Port: 80 Protocol: TCP & UDP Device IP: 192.168.1.10:80 Enabled: True Trying to connect from within the lan to 192.168.1.1:80 from within browser - Works properly. Trying to connect from within the lan to 10:10:10:10:999 from within browser - Works properly. Trying to connect from outside the LAN (e.g. via 3g or another isp) to 10:10:10:10:999 from within browser - Doesnt work. I get the following errors from different machines / browsers: Safari could not open the page because the server stopped responding (IOS) The server at xx.xx.xx.xx is taking too long to respond. (firefox) This problem is not just for the Axis camera. I am also having similar problems connecting to my NAS drive. After using a web based port scanning tool, it appears as though port 999 is closed. Not certain why when I have set up port forwarding within the router. Any troubleshooting suggestions to help me determine whether the problem is with my Cisco settings / firewall or whether it could be my ISP blocking incoming connection requests? Many thanks

Read the article

MacMini transmit rate stuck at 11, every other device can connect at full 54Mbit/s?

- by chum of chance

I have a MacMini circa 2007 that's getting very low transmit rates via wifi, 8-11. I have other devices that are getting full 54, including a MacBook Air. With everything else off, the MacMini doesn't want to seem to go any faster. Since it has been previously connected to ethernet its entire life, I was wondering if there were some settings I can change to speed up the connection. Option-clicking the network icon gives this read out: PHY Mode: 802.11g Channel: 1 (2.4 Ghz) Security: WPA2 Personal RSSI: -73 Transmit Rate: 11 My new MacBook Air has the following readout: PHY Mode: 802.11n Channel: 1 (2.4 Ghz) Security: WPA2 Personal RSSI: -66 Transmit Rate: 79 Both have full bars and the wireless router is in the same room to eliminate any obstructions from the equation. Could the MacMini be connecting at an older protocol, like 802.11b and be reporting erroneously that it is connected at 802.11g? This would explain why I haven't seen a transmit rate above 11. Any further trouble shooting I can try before buying a new USB 802.11n device? The WiFi router is a DLink DIR-615. I can see other devices, and none, even the other g connected devices, are getting below 30-40 MBit/s. What's going on here?

Read the article

"Synchronizing" files between local and remote server using Git

- by ConcreteVitamin

My intended goal: I maintain some files in my local computer, and I also share them with others by putting them on my website. In the past I did this by manually uploading all the files using FTP, every time I did some modifications etc. Now, I am wondering if I can use Git to help me achieve this (by "pushing" the local files to my website server). My server is hosted by Dreamhost. First Attempt: First, I try this tutorial. I first push my local files to my Github repo, and ssh into my Dreamhost server to clone --bare from the Github repo. But I find that git does not transfer my files. So I ignore the tutorial. Second Attempt: I ssh into my Dreamhost server to clone directly from Github. My files are all transfered to the server. Then, on my local computer, I git remote add dreamhost ssh://[email protected]/~/my-project. Then I add some files, and commit, and git push dreamhost master. And a bunch of errors appears: http://geotakucovi.com/gitError.jpg As a newbie Git user, I must have missed something. Please help!

Read the article

Determine which user initiated call in Asterisk

- by adaptive

I had the following code in my extensions.conf file: [local] exten => _NXXNXXXXXX,1,Set(CALLERID(name)=${OUTGOING_NAME}) exten => _NXXNXXXXXX,n,Set(CALLERID(num)=${OUTGOING_NUMBER}) Now I want to change this code to set the CallerID and number based on the user/extension that is making the call. In fact I have four(4) users/extensions in my sip.conf and only one of them (the one I use for business) is supposed to send a different caller id/number. Everything is in the same context (for simplicity) since all lines need to be able to pick up an incoming call. The only difference is when line1 needs to make a call, it has to send a different caller id/number and use a different provider. This is what I have so far: [local] exten => _NXXNXXXXXX,1,Set(line=${SIP_HEADER(From)}) exten => _NXXNXXXXXX,n,Verbose(line variable is <${line}>) exten => _NXXNXXXXXX,n,Set(CALLERID(name)=${IF($[ ${line} = line1 ]?${COMPANY_NAME}:${FAMILY_NAME})}) exten => _NXXNXXXXXX,n,Set(CALLERID(num)=${IF($[ ${line} = line1 ]?${COMPANY_NUMBER}:${FAMILY_NUMBER})}) exten => _NXXNXXXXXX,n,Dial(${IF($[ ${line} = line1]?SIP/${EXTEN}@${COMPANY_PROVIDER}:SIP/${EXTEN}@${FAMILY_PROVIDER})}) I really don't know if this is correct and I'm afraid to commit these changes to my extensions.conf before validating. Any help will be greatly appreciated.

Read the article

Configuring iptables rules for HAProxy and others

- by MLister

I have the following relevant settings for HAProxy: defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 500 contimeout 5s clitimeout 15s srvtimeout 15s frontend public bind *:80 option http-server-close option http-pretend-keepalive option forwardfor # ACLs ... I have three backends (including a Nginx server) configured in HAProxy, all listening on different ports of 127.0.0.1. And my iptables config is this: *filter # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT -i lo -d 127.0.0.0/8 -j REJECT # Accepts all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allows all outbound traffic # You can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allows HTTP and HTTPS connections from anywhere (the normal ports for websites) -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allows SSH connections # # THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE # -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT My questions are: Would the above iptables config work with the settings/options in my HAProxy config? I am also runnning a postgres and a redis server on the same machine, what settings do I need to adjust for these two to enable them work with iptables?

Read the article

Non-volatile cache RAID controllers: what kind of protection is there against NVCACHE failure?

- by astrostl

The battery back-up (BBU) model: admin enables write-back cache with BBU writes are cached to the RAID controller's RAM (major performance benefit) the battery saves uncommitted and cached data in the event of a power loss (reliability) If I lose power and come back within a day or so, my data should be both complete and uncorrupted. The downside to this is that, if the battery is dead or low, OR EVEN IF IT IS IN A RELEARN CYCLE (drain/charge loops to ensure the battery's health), the controller reverts to write-through mode and performance will suffer. What's more, the relearn cycles are usually automated on a schedule which may or may not happen in the middle of big traffic. So, that has to be manually disabled and manually scheduled for off-hours if it's a concern. Annoying either way. NV caches have capacitors with a sufficient charge to commit any uncommitted-to-disk data to flash. Not only is that more survivable in longer loss situations, but you don't have to concern yourself with battery death, wear-out, or relearning. All of that sounds great to me. What doesn't sound great to me is the prospect of that flash module having an issue, though. What if it's completely hosed? What if it's only partially hosed? A bit corrupted at the edges? Relearn cycles can tell when something like a simple battery is failing, but is there a similar process to verify that the flash is functional? I'm just far more trusting of a battery, warts and all. I know the card's RAM can fail, the card itself can fail - that's common territory, though. In case you didn't guess, yeah, I've experienced a shocking-to-me amount of flash/SSD/etc. failure :)

Read the article

Several web applications on a single port

- by Nevermind

We're developing an online browser-based game. The game itself is a plugin in the web page, that uses TCP connection to a game server, and also sends http requests to "content server" web application. This makes 3 servers total: the site itself, game server and content server. Site and content server are IIS web applications, game server is a custom application communicating over TCP with proprietary protocol. While the game is in beta stage, all these servers are physically hosted on a single machine, and distinguished by ports. For example, website is game.example.com:80, game server is game.example.com:34285 and content server is game.example.com:50000. This works OK most of the time, but some of our players have ports other than 80 closed. Is there any way to make all these application work through port 80, while still having them one one physical server? Maybe using different sub-domains? There's probably a way to make IIS forward requests to different web applications based on URL alone, but that doesn't help with game server. Edit Server is Windows Server 2008, IIS 7

Read the article

Server down at 23:26 every night

- by miccet

We are having a big problem with our sites stability the last couple of weeks and after endless hours of troubleshooting I don't get anywhere. So I turn to you dear community. Setup: 2 x VPS servers - Front end, 8 core, 8G RAM. - Database, 5 core, 3G RAM. Both running Ubuntu. Ruby on Rails EE with Passenger 3 and Rails 2.3.11. MySQL 5.1.67. The problem is that each night, at the exact same time (23:26) the SQL server suddenly shows a processlist full of COMMIT with an increasing Time. After 30-40 seconds (can go longer) a wave seems processed and the site responds for a few seconds before it repeats. During this hick up the database server load spikes while the front end is relaxing. I have looked at slow queries, but is not finding any locks or other unusual queries ran at this time. I have looked at iotop at the time of the halt and there is no activity from mysql. I also tried turning off query_cache and messed around with the mysql configuration file without much change. Any ideas?

Read the article

Determining how all memory is used in Windows Server 2008

- by Mojah

I have a Windows Server 2008 system, which has 12GB of RAM. If I list all processes in the Task Manager, and SUM() the memory of each process (Working Set, Memory (Private Working Set), Commit Size, ...), I never reach more than 4-5GB that should be "in use". However, task manager reports this server has 11GB in use via the "Performance" tab. I'm failing in determining where all that used RAM is going. It doesn't seem to be system cache, but I can not be sure. It might be a memory leak in one of the appliances, but I'm struggling to find out which one. The server's memory keeps filing up, and eventually forces us to reboot the device to clear it. I've been reading up on how RAM assignments work on Windows Server: RAM, Virtual Memory, Pagefile and all that stuff: http://support.microsoft.com/kb/2267427 What's the best way to measure? http://www.zdnet.com/blog/bott/windows-7-memory-usage-whats-the-best-way-to-measure/1786 Configure the file system cache in Windows: http://smallvoid.com/article/winnt-system-cache.html But I fear I'm stuck without ideas at the moment.

Read the article

Excel 2013: VLookup for cells that share common characters within cell but are both surrounded by other non-matching text

- by Kylie Z

I am pulling information from 2 different databases. The databases use different naming protocol for the exact same item/specified placement however they always have certain components of the name in common. The length of these names can vary throughout each of the databases (see the pic below) so I don't think counting characters would help. I need a formula (probably a vlookup/match/index of some sort) to pair up the names from the 2nd database name with the 1st database name and then place it in the adjacent column(B2) on sheet1. Until this point I've had to match, copy, and paste the pairs manually from one sheet to the other and it takes FOREVER. Any help would be much appreciated!!! For example: Database1 Name in Sheet1,A2: 728x90_Allstate_629930_ALL_JUL_2013_MASSACHUSETTSAUTO_BAN_MSN_ROSMSNAUTOSMASSACHUSETTS_7.2.13 Database2 Name in Sheet2, A13: BAN_MSN_ROSMSNAUTOSMASSACHUSETTS728X90_728X90_DFA Common Factors: "ROSMSNAUTOSMASSACHUSETTS" & "728X90" Therefore A2 and A13 need to pair up In some cases, Database 1 and 2 will have a common name aspect but sizing will be different. They need to have BOTH aspects in common in order to be paired so I would NOT want the below example to pair up. Database1 Name in Sheet1,A2: 728x90_Allstate_629930_ALL_JUL_2013_MASSACHUSETTSAUTO_BAN_MSN_ROSMSNAUTOSMASSACHUSETTS_7.2.13 Database2 Name in Sheet2, A12: BAN_MSN_ROSMSNAUTOSMASSACHUSETTS300X250_300X250_DFA Common Factor: Only "ROSMSNAUTOSMASSACHUSETTS" matches. "728x90" is not equal to "300X250" - Sizing is different so they should not be paired.

Read the article

ip6tables blocking output traffic

- by jmccrohan

My OpenVZ VPS is blocking outbound IPv6 traffic, but correctly filtering inbound IPv6 traffic. Below is my ip6tables-restore script. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p ipv6-icmp -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -p tcp -m tcp --dport 51413 -j ACCEPT -A INPUT -p udp -m udp --dport 51413 -j ACCEPT -A INPUT -m limit --limit 5/min -A INPUT -j REJECT --reject-with icmp6-adm-prohibited -A FORWARD -j ACCEPT -A OUTPUT -j ACCEPT COMMIT ICMPv6 traffic is still able to pass both inbound and outbound. When I flush these rules using -F, outbound traffic flows fine. What am I missing here? EDIT: It appears that ip6tables is marking ESTABLISHED packets as INVALID. Consequently, the outbound traffic is NOT actually being blocked. The reply packets are not allowed inbound again, hence appearing like blocked outbound traffic. Allowing INVALID packets inbound solves the outbound issue, but also renders the inbound filter useless.

Read the article

Looking for VCS wrapper that tracks system files changing across the whole *nix OS and sends diffs through email

- by nextus

I need some software that looks after custom directories across the whole OS (i.e. /etc) and alerting me if someone edit something file inside. Additionally, this tool must automatically commit and push changes into backup server, so I can easily determine when specific change in specific file was made. I'm using cvsbackup right now but I want to create or found something more modern. I think using git as VCS is a great idea. I could have local repository and easily revert changes in my configuration files. Furthermore, pushing changes to the remote repository would helps me to recover my configuration files when the server is fault. It doesn't seems difficult to write some wrapper around the git but there are a lot of problems. For example, I need to track custom directories: /usr/local/nginx/ and /etc/. So the destination point for my git repository is /. I don't need to track the other directories so I must to write overwhelming .gitignore rule: * !.gitignore !/etc/ !etc/* !/usr /usr/* !/usr/local /usr/local/* !/usr/local/nginx !/usr/local/nginx/* It's very daunting and prone to error. So it's maybe a good idea to create intermediate file that wrapper reads and converts to .gitignore format. Additionally, I don't want to keep my .git folder in / partition so I need to set appropriate GIT_DIR and GIT_WORK_TREE variables for git. Is there any ready to use tools for implementation this task? I don't found any but I don't believe that no one needs this feature.

Read the article

Problem in Apache CXF (Simple Frontend): 'Already connected'

- by seanizer

I am using apache CXF for the first time. I am trying to establish a connection based on the CXF simple front end (Configuration notes) technology. I can't really see what I've done wrong, but I am getting a weird error (see below). I have also posted this question to [email protected], but I haven't received a response yet. Perhaps someone here can help. The service bean that is wrapped here is a Spring / JPA service that does not know anything about the web, I want to use simple frontend to publish it as a web service without having to annotate it with Jax-ws etc. (This works in theory). Here's my configuration: Server: <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:simple="http://cxf.apache.org/simple" xmlns:soap="http://cxf.apache.org/bindings/soap" xmlns:context="http://www.springframework.org/schema/context" xmlns:cs="http://[www.mycompany.com]/coupon/service" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd http://cxf.apache.org/bindings/soap http://cxf.apache.org/schemas/configuration/soap.xsd http://cxf.apache.org/simple http://cxf.apache.org/schemas/simple.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-3.0.xsd" default-autowire="byType" > <import resource="classpath:META-INF/cxf/cxf.xml" /> <import resource="classpath:META-INF/cxf/cxf-extension-soap.xml" /> <import resource="classpath:META-INF/cxf/cxf-extension-http.xml" /> <import resource="classpath:META-INF/cxf/cxf-extension-http-binding.xml" /> <import resource="classpath:META-INF/cxf/cxf-servlet.xml" /> <import resource="classpath*:persistenceContext.xml" /> <!—my service implementation -->  <simple:server id="server" serviceBean="couponService" serviceClass="[com.mycompany].MyServiceInterface" bindingId="http://apache.org/cxf/binding/http" address="/${wsdl.path}" serviceName="cs:couponService" endpointName="cs:couponServicePort" > <simple:dataBinding> <bean class="org.apache.cxf.aegis.databinding.AegisDatabinding" /> </simple:dataBinding> <simple:binding> <soap:soapBinding version="1.2" mtomEnabled="true" /> </simple:binding> </simple:server> <context:property-placeholder location="classpath:service.properties" /> </beans> Client: <beans xmlns="http://www.springframework.org/schema/beans" xmlns:simple="http://cxf.apache.org/simple" xmlns:soap="http://cxf.apache.org/bindings/soap" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:aop="http://www.springframework.org/schema/aop" xmlns:context="http://www.springframework.org/schema/context" xmlns:oxm=http://www.springframework.org/schema/oxm xmlns:cs="http://[www.mycompany.com]/coupon/service" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd http://cxf.apache.org/bindings/soap http://cxf.apache.org/schemas/configuration/soap.xsd http://cxf.apache.org/simple http://cxf.apache.org/schemas/simple.xsd http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-3.0.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-3.0.xsd http://www.springframework.org/schema/oxm http://www.springframework.org/schema/oxm/spring-oxm-3.0.xsd" default-autowire="byType" > <import resource="classpath:META-INF/cxf/cxf.xml" /> <import resource="classpath:META-INF/cxf/cxf-extension-http.xml" /> <import resource="classpath:META-INF/cxf/cxf-extension-http-binding.xml" /> <import resource="classpath:META-INF/cxf/cxf-extension-soap.xml" /> <simple:client id="couponService" wsdlLocation="${wsdl.url}?wsdl" serviceName="cs:couponService" endpointName="cs:couponServicePort" transportId="http://schemas.xmlsoap.org/soap/http" address="${wsdl.url}" bindingId="http://apache.org/cxf/binding/http" serviceClass="[com.mycompany].MyServiceInterface"> <simple:dataBinding> <bean class="org.apache.cxf.aegis.databinding.AegisDatabinding" /> </simple:dataBinding> <simple:binding> <soap:soapBinding mtomEnabled="true" version="1.2" /> </simple:binding> </simple:client> <context:property-placeholder location="classpath:service.properties" /> On the client side, I inject the generated service into my web application (I am using wicket but that should be irrelevant) and when I call service methods on it I get an IllegalStateException from java.net.HttpURLConnection saying the connection is already open. Here’s the stack trace: java.lang.IllegalStateException: IllegalStateException invoking http://localhost:9999/services/coupon: Already connected at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.mapException(HTTPConduit.java:2058) at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.close(HTTPConduit.java:2048) at org.apache.cxf.transport.AbstractConduit.close(AbstractConduit.java:66) at org.apache.cxf.transport.http.HTTPConduit.close(HTTPConduit.java:639) at org.apache.cxf.interceptor.MessageSenderInterceptor$MessageSenderEndingInterceptor.handleMessage(MessageSenderInterceptor.java:62) at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:243) at org.apache.cxf.binding.http.interceptor.DatabindingOutSetupInterceptor.handleMessage(DatabindingOutSetupInterceptor.java:91) at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:243) at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:487) at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:313) at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:265) at org.apache.cxf.frontend.ClientProxy.invokeSync(ClientProxy.java:73) at org.apache.cxf.frontend.ClientProxy.invoke(ClientProxy.java:68) at $Proxy30.createIndividualUserCouponsJob(Unknown Source) at [com.mycompany].coupons.web.app.dummycontent.DummyContentInitializer.addSomeIndividualCoupons(DummyContentInitializer.java:84) at [com.mycompany].coupons.web.app.dummycontent.DummyContentInitializer.addSomeCoupons(DummyContentInitializer.java:68) at [com.mycompany].coupons.web.app.dummycontent.DummyContentInitializer.init(DummyContentInitializer.java:50) at org.apache.wicket.Application.callInitializers(Application.java:843) at org.apache.wicket.Application.initializeComponents(Application.java:678) at org.apache.wicket.protocol.http.WicketFilter.init(WicketFilter.java:725) at org.apache.wicket.protocol.http.WicketServlet.init(WicketServlet.java:219) at javax.servlet.GenericServlet.init(GenericServlet.java:241) at org.mortbay.jetty.servlet.ServletHolder.initServlet(ServletHolder.java:433) at org.mortbay.jetty.servlet.ServletHolder.doStart(ServletHolder.java:256) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:40) at org.mortbay.jetty.servlet.ServletHandler.initialize(ServletHandler.java:617) at org.mortbay.jetty.servlet.Context.startContext(Context.java:139) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1218) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:500) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:448) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:117) at org.mortbay.jetty.Server.doStart(Server.java:220) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:40) at [com.mycompany].coupons.web.test.Start.main(Start.java:45) Caused by: java.lang.IllegalStateException: Already connected at java.net.HttpURLConnection.setFixedLengthStreamingMode(HttpURLConnection.java:103) at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.thresholdNotReached(HTTPConduit.java:1889) at org.apache.cxf.io.AbstractThresholdOutputStream.close(AbstractThresholdOutputStream.java:99) at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.close(HTTPConduit.java:1980) This happens the first time a service call is made, and the only URLConnection that is opened before that is that of the wsdl. I have searched the web for similar problems, but all I found was a bug using rest that has already been fixed. I am trying to use the simple frontend, as my service is not annotated with jax-ws annotations and I would like to keep it that way. Can someone help? Thanks in advance. Sean

Read the article

Core Data error when assigning variable with one-to-one relationship

- by Hoang Pham

Read the article

SocketChannel in Java sends data, but it doesn't get to destination application

- by Peterson

Hi Everybody, I'm suffering a lot to create a simple ChatServer in Java, using the NIO libraries. Wonder if someone could help me. I am doing that by using SocketChannel and Selector to handle multiple clients in a single thread. The problem is: I am able to accept new connections and get it's data, but when I try to send data back, the SocketChannel simply doesn't work. In the method write(), it returns a integer that is the same size of the data i'm passing to it, but the client never receives that data. Strangely, when I close the server application, the client receives the data. It's like the socketchannel maintains a buffer, and it only get flushed when I close the application. Here are some more details, to give you more information to help. I'm handling the events in this piece of code: private void run() throws IOException { ServerSocketChannel ssc = ServerSocketChannel.open(); // Set it to non-blocking, so we can use select ssc.configureBlocking( false ); // Get the Socket connected to this channel, and bind it // to the listening port this.serverSocket = ssc.socket(); InetSocketAddress isa = new InetSocketAddress( this.port ); serverSocket.bind( isa ); // Create a new Selector for selecting this.masterSelector = Selector.open(); // Register the ServerSocketChannel, so we can // listen for incoming connections ssc.register( masterSelector, SelectionKey.OP_ACCEPT ); while (true) { // See if we've had any activity -- either // an incoming connection, or incoming data on an // existing connection int num = masterSelector.select(); // If we don't have any activity, loop around and wait // again if (num == 0) { continue; } // Get the keys corresponding to the activity // that has been detected, and process them // one by one Set keys = masterSelector.selectedKeys(); Iterator it = keys.iterator(); while (it.hasNext()) { // Get a key representing one of bits of I/O // activity SelectionKey key = (SelectionKey)it.next(); // What kind of activity is it? if ((key.readyOps() & SelectionKey.OP_ACCEPT) == SelectionKey.OP_ACCEPT) { // Aceita a conexão Socket s = serverSocket.accept(); System.out.println( "LOG: Conexao TCP aceita de " + s.getInetAddress() + ":" + s.getPort() ); // Make sure to make it non-blocking, so we can // use a selector on it. SocketChannel sc = s.getChannel(); sc.configureBlocking( false ); // Registra a conexao no seletor, apenas para leitura sc.register( masterSelector, SelectionKey.OP_READ ); } else if ( key.isReadable() ) { SocketChannel sc = null; // It's incoming data on a connection, so // process it sc = (SocketChannel)key.channel(); // Verifica se a conexão corresponde a um cliente já existente if((clientsMap.getClient(key)) != null){ boolean closedConnection = !processIncomingClientData(key); if(closedConnection){ int id = clientsMap.getClient(key); closeClient(id); } } else { boolean clientAccepted = processIncomingDataFromNewClient(key); if(!clientAccepted){ // Se o cliente não foi aceito, sua conexão é simplesmente fechada sc.socket().close(); sc.close(); key.cancel(); } } } } // We remove the selected keys, because we've dealt // with them. keys.clear(); } } This piece of code is simply handles new clients that wants to connect to the chat. So, a client makes a TCP connection to the server, and once it gets accepted, it sends data to the server following a simply text protocol, informing his id and asking to get registrated to the server. I handle this in the method processIncomingDataFromNewClient(key). I'm also keeping a map of clients and its connections in a data structure similar to a hashtable. I? doing that because I need to recover a client Id from a connection and a connection from a client Id. This is can be shown in: clientsMap.getClient(key). But the problem itself resides in the method processIncomingDataFromNewClient(key). There, I simply read the data that the client sent to me, validate it, and if it's ok, I send a message back to the client to tell that it is connected to the chat server. Here is a similar piece of code: private boolean processIncomingDataFromNewClient(SelectionKey key){ SocketChannel sc = (SocketChannel) key.channel(); String connectionOrigin = sc.socket().getInetAddress() + ":" + sc.socket().getPort(); int id = 0; //id of the client buf.clear(); int bytesRead = 0; try { bytesRead = sc.read(buf); if(bytesRead<=0){ System.out.println("Conexão fechada pelo: " + connectionOrigin); return false; } System.out.println("LOG: " + bytesRead + " bytes lidos de " + connectionOrigin); String msg = new String(buf.array(),0,bytesRead); // Do validations with the client sent me here // gets the client id }catch (Exception e) { e.printStackTrace(); System.out.println("LOG: Oops. Cliente não conhece o protocolo. Fechando a conexão: " + connectionOrigin); System.out.println("LOG: Primeiros 10 caracteres enviados pelo cliente: " + msg); return false; } } } catch (IOException e) { System.out.println("LOG: Erro ao ler dados da conexao: " + connectionOrigin); System.out.println("LOG: "+ e.getLocalizedMessage()); System.out.println("LOG: Fechando a conexão..."); return false; } // If it gets to here, the protocol is ok and we can add the client boolean inserted = clientsMap.addClient(key, id); if(!inserted){ System.out.println("LOG: Não foi possível adicionar o cliente. Ou ele já está conectado ou já têm clientes demais. Id: " + id); System.out.println("LOG: Fechando a conexão: " + connectionOrigin); return false; } System.out.println("LOG: Novo cliente conectado! Enviando mesnsagem de confirmação. Id: " + id + " Conexao: " + connectionOrigin); /* Here is the error */ sendMessage(id, "Servidor pet: connection accepted"); System.out.println("LOG: Novo cliente conectado! Id: " + id + " Conexao: " + connectionOrigin); return true; } And finally, the method sendMessage(SelectionKey key) looks like this: private void sendMessage(int destId, String msg) { Charset charset = Charset.forName("ISO-8859-1"); CharBuffer charBuffer = CharBuffer.wrap(msg, 0, msg.length()); ByteBuffer bf = charset.encode(charBuffer); //bf.flip(); int bytesSent = 0; SelectionKey key = clientsMap.getClient(destId); SocketChannel sc = (SocketChannel) key.channel(); try { / int total_bytes_sent = 0; while(total_bytes_sent < msg.length()){ bytesSent = sc.write(bf); total_bytes_sent += bytesSent; } System.out.println("LOG: Bytes enviados para o cliente " + destId + ": "+ total_bytes_sent + " Tamanho da mensagem: " + msg.length()); } catch (IOException e) { System.out.println("LOG: Erro ao mandar mensagem para: " + destId); System.out.println("LOG: " + e.getLocalizedMessage()); } } So, what is happening is that the server, when send a message, prints something like this: LOG: Bytes sent to the client: 28 Size of the message: 28 So, it tells that it sent the data, but the chat client keeps blocking, waiting in the recv() method. So, the data never gets to it. When I close the server application, though, all the data appears in the client. I wonder why. It is important to say that the client is in C and the server JAVA, and I'm running both in the same machine, an Ubuntu Guest in virtualbox under windows. I also run both under windows host and under linuxes hosts, and keep getting the same strange problem. I'm sorry for the great lenght of this question, but I already searched a lot of places for an answer, found a lot of tutorials and questions, including here at StackOverflow, but coundn't find a reasonable explanation. I am really not liking this Java NIO, and i saw a lot of people complaining about it too. I am thinking that if I had done that in C it would have been a lot easier :-D So, if someone could help me and even discuss this behavor, it would be great! :-) Thanks everybody in advance, Péterson

Read the article

Log call information whenever there is a call.

- by linuxdoniv

Hi, I have written the android application and I want the application to send the call information whenever there is an incoming call and it ends. This way I would be sending all calls to the server irrespective of size of the call log. Here is the code public class PhoneInfo extends BroadcastReceiver { private int incoming_call = 0; private Cursor c; Context context; public void onReceive(Context con, Intent intent) { c = con.getContentResolver().query( android.provider.CallLog.Calls.CONTENT_URI, null, null, null, android.provider.CallLog.Calls.DATE+ " DESC"); context = con; IncomingCallListener phoneListener=new IncomingCallListener(); TelephonyManager telephony = (TelephonyManager) con.getSystemService(Context.TELEPHONY_SERVICE); telephony.listen(phoneListener,PhoneStateListener.LISTEN_CALL_STATE); } public class IncomingCallListener extends PhoneStateListener { public void onCallStateChanged(int state,String incomingNumber){ switch(state){ case TelephonyManager.CALL_STATE_IDLE: if(incoming_call == 1){ CollectSendCallInfo(); incoming_call = 0; } break; case TelephonyManager.CALL_STATE_OFFHOOK: break; case TelephonyManager.CALL_STATE_RINGING: incoming_call = 1; break; } } } private void CollectSendCallInfo() { int numberColumn = c.getColumnIndex( android.provider.CallLog.Calls.NUMBER); int dateColumn = c.getColumnIndex( android.provider.CallLog.Calls.DATE); int typeColumn = c.getColumnIndex( android.provider.CallLog.Calls.TYPE); int durationColumn=c.getColumnIndex( android.provider.CallLog.Calls.DURATION); ArrayList<String> callList = new ArrayList<String>(); try{ boolean moveToFirst=c.moveToFirst(); } catch(Exception e) { ; // could not move to the first row. return; } int row_count = c.getCount(); int loop_index = 0; int is_latest_call_read = 0; String callerPhonenumber = c.getString(numberColumn); int callDate = c.getInt(dateColumn); int callType = c.getInt(typeColumn); int duration=c.getInt(durationColumn); while((loop_index <row_count) && (is_latest_call_read != 1)){ switch(callType){ case android.provider.CallLog.Calls.INCOMING_TYPE: is_latest_call_read = 1; break; case android.provider.CallLog.Calls.MISSED_TYPE: break; case android.provider.CallLog.Calls.OUTGOING_TYPE: break; } loop_index++; c.moveToNext(); } SendCallInfo(callerPhonenumber, Integer.toString(duration), Integer.toString(callDate)); } private void SendCallInfo(String callerPhonenumber, String callDuration, String callDate) { JSONObject j = new JSONObject(); try { j.put("Caller", callerPhonenumber); j.put("Duration", callDuration); j.put("CallDate", callDate); } catch (JSONException e) { Toast.makeText(context, "Json object failure!", Toast.LENGTH_LONG).show(); } String url = "http://xxxxxx.xxx.xx/xxxx/xxx.php"; Map<String, String> kvPairs = new HashMap<String, String>(); kvPairs.put("phonecall", j.toString()); HttpResponse re; try { re = doPost(url, kvPairs); String temp; try { temp = EntityUtils.toString(re.getEntity()); if (temp.compareTo("SUCCESS") == 0) { ; } else ; } catch (ParseException e1) { Toast.makeText(context, "Parse Exception in response!", Toast.LENGTH_LONG) .show(); e1.printStackTrace(); } catch (IOException e1) { Toast.makeText(context, "Io exception in response!", Toast.LENGTH_LONG).show(); e1.printStackTrace(); } } catch (ClientProtocolException e1) { Toast.makeText(context, "Client Protocol Exception!", Toast.LENGTH_LONG).show(); e1.printStackTrace(); } catch (IOException e1) { Toast.makeText(context, "Client Protocol Io exception!", Toast.LENGTH_LONG).show(); e1.printStackTrace(); } } and here is the manifest file <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION"></uses-permission> <uses-permission android:name="android.permission.INTERNET"></uses-permission> <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"></uses-permission> <uses-permission android:name="android.permission.ACCESS_LOCATION_EXTRA_COMMANDS"></uses-permission> <uses-permission android:name="android.permission.INSTALL_LOCATION_PROVIDER"></uses-permission> <uses-permission android:name="android.permission.SET_DEBUG_APP"></uses-permission> <uses-permission android:name="android.permission.RECEIVE_SMS"></uses-permission> <uses-permission android:name="android.permission.READ_PHONE_STATE"></uses-permission> <uses-permission android:name="android.permission.READ_SMS"></uses-permission> <application android:icon="@drawable/icon" android:label="@string/app_name"> <activity android:name=".Friend" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <activity android:name=".LoginInfo" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.DEFAULT" /> </intent-filter> </activity> <service android:exported="true" android:enabled="true" android:name=".GeoUpdateService" > </service> <receiver android:name=".SmsInfo" > <intent-filter> <action android:name= "android.provider.Telephony.SMS_RECEIVED" /> </intent-filter> </receiver> <receiver android:name=".PhoneInfo" > <intent-filter> <action android:name="android.intent.action.PHONE_STATE"></action> </intent-filter> </receiver> </application> The application just crashes when there is an incoming call.. i have been able to log the information about incoming SMS, but this call info logging is failing. Thanks for any help.

Read the article

Weblogic 10.0: SAMLSignedObject.verify() failed to validate signature value

- by joshea

I've been having this problem for a while and it's driving me nuts. I'm trying to create a client (in C# .NET 2.0) that will use SAML 1.1 to sign on to a WebLogic 10.0 server (i.e., a Single Sign-On scenario, using browser/post profile). The client is on a WinXP machine and the WebLogic server is on a RHEL 5 box. I based my client largely on code in the example here: http://www.codeproject.com/KB/aspnet/DotNetSamlPost.aspx (the source has a section for SAML 1.1). I set up WebLogic based on instructions for SAML Destination Site from here:http://www.oracle.com/technology/pub/articles/dev2arch/2006/12/sso-with-saml4.html I created a certificate using makecert that came with VS 2005. makecert -r -pe -n "CN=whatever" -b 01/01/2010 -e 01/01/2011 -sky exchange whatever.cer -sv whatever.pvk pvk2pfx.exe -pvk whatever.pvk -spc whatever.cer -pfx whatever.pfx Then I installed the .pfx to my personal certificate directory, and installed the .cer into the WebLogic SAML Identity Asserter V2. I read on another site that formatting the response to be readable (ie, adding whitespace) to the response after signing would cause this problem, so I tried various combinations of turning on/off .Indent XMLWriterSettings and turning on/off .PreserveWhiteSpace when loading the XML document, and none of it made any difference. I've printed the SignatureValue both before the message is is encoded/sent and after it arrives/gets decoded, and they are the same. So, to be clear: the Response appears to be formed, encoded, sent, and decoded fine (I see the full Response in the WebLogic logs). WebLogic finds the certificate I want it to use, verifies that a key was supplied, gets the signed info, and then fails to validate the signature. Code: public string createResponse(Dictionary<string, string> attributes){ ResponseType response = new ResponseType(); // Create Response response.ResponseID = "_" + Guid.NewGuid().ToString(); response.MajorVersion = "1"; response.MinorVersion = "1"; response.IssueInstant = System.DateTime.UtcNow; response.Recipient = "http://theWLServer/samlacs/acs"; StatusType status = new StatusType(); status.StatusCode = new StatusCodeType(); status.StatusCode.Value = new XmlQualifiedName("Success", "urn:oasis:names:tc:SAML:1.0:protocol"); response.Status = status; // Create Assertion AssertionType assertionType = CreateSaml11Assertion(attributes); response.Assertion = new AssertionType[] {assertionType}; //Serialize XmlSerializerNamespaces ns = new XmlSerializerNamespaces(); ns.Add("samlp", "urn:oasis:names:tc:SAML:1.0:protocol"); ns.Add("saml", "urn:oasis:names:tc:SAML:1.0:assertion"); XmlSerializer responseSerializer = new XmlSerializer(response.GetType()); StringWriter stringWriter = new StringWriter(); XmlWriterSettings settings = new XmlWriterSettings(); settings.OmitXmlDeclaration = true; settings.Indent = false;//I've tried both ways, for the fun of it settings.Encoding = Encoding.UTF8; XmlWriter responseWriter = XmlTextWriter.Create(stringWriter, settings); responseSerializer.Serialize(responseWriter, response, ns); responseWriter.Close(); string samlString = stringWriter.ToString(); stringWriter.Close(); // Sign the document XmlDocument doc = new XmlDocument(); doc.PreserveWhiteSpace = true; //also tried this both ways to no avail doc.LoadXml(samlString); X509Certificate2 cert = null; X509Store store = new X509Store(StoreName.My, StoreLocation.CurrentUser); store.Open(OpenFlags.ReadOnly); X509Certificate2Collection coll = store.Certificates.Find(X509FindType.FindBySubjectDistinguishedName, "distName", true); if (coll.Count < 1) { throw new ArgumentException("Unable to locate certificate"); } cert = coll[0]; store.Close(); //this special SignDoc just overrides a function in SignedXml so //it knows to look for ResponseID rather than ID XmlElement signature = SamlHelper.SignDoc( doc, cert, "ResponseID", response.ResponseID); doc.DocumentElement.InsertBefore(signature, doc.DocumentElement.ChildNodes[0]); // Base64Encode and URL Encode byte[] base64EncodedBytes = Encoding.UTF8.GetBytes(doc.OuterXml); string returnValue = System.Convert.ToBase64String( base64EncodedBytes); return returnValue; } private AssertionType CreateSaml11Assertion(Dictionary<string, string> attributes){ AssertionType assertion = new AssertionType(); assertion.AssertionID = "_" + Guid.NewGuid().ToString(); assertion.Issuer = "madeUpValue"; assertion.MajorVersion = "1"; assertion.MinorVersion = "1"; assertion.IssueInstant = System.DateTime.UtcNow; //Not before, not after conditions ConditionsType conditions = new ConditionsType(); conditions.NotBefore = DateTime.UtcNow; conditions.NotBeforeSpecified = true; conditions.NotOnOrAfter = DateTime.UtcNow.AddMinutes(10); conditions.NotOnOrAfterSpecified = true; //Name Identifier to be used in Saml Subject NameIdentifierType nameIdentifier = new NameIdentifierType(); nameIdentifier.NameQualifier = domain.Trim(); nameIdentifier.Value = subject.Trim(); SubjectConfirmationType subjectConfirmation = new SubjectConfirmationType(); subjectConfirmation.ConfirmationMethod = new string[] { "urn:oasis:names:tc:SAML:1.0:cm:bearer" }; // // Create some SAML subject. SubjectType samlSubject = new SubjectType(); AttributeStatementType attrStatement = new AttributeStatementType(); AuthenticationStatementType authStatement = new AuthenticationStatementType(); authStatement.AuthenticationMethod = "urn:oasis:names:tc:SAML:1.0:am:password"; authStatement.AuthenticationInstant = System.DateTime.UtcNow; samlSubject.Items = new object[] { nameIdentifier, subjectConfirmation}; attrStatement.Subject = samlSubject; authStatement.Subject = samlSubject; IPHostEntry ipEntry = Dns.GetHostEntry(System.Environment.MachineName); SubjectLocalityType subjectLocality = new SubjectLocalityType(); subjectLocality.IPAddress = ipEntry.AddressList[0].ToString(); authStatement.SubjectLocality = subjectLocality; attrStatement.Attribute = new AttributeType[attributes.Count]; int i=0; // Create SAML attributes. foreach (KeyValuePair<string, string> attribute in attributes) { AttributeType attr = new AttributeType(); attr.AttributeName = attribute.Key; attr.AttributeNamespace= domain; attr.AttributeValue = new object[] {attribute.Value}; attrStatement.Attribute[i] = attr; i++; } assertion.Conditions = conditions; assertion.Items = new StatementAbstractType[] {authStatement, attrStatement}; return assertion; } private static XmlElement SignDoc(XmlDocument doc, X509Certificate2 cert2, string referenceId, string referenceValue) { // Use our own implementation of SignedXml SamlSignedXml sig = new SamlSignedXml(doc, referenceId); // Add the key to the SignedXml xmlDocument. sig.SigningKey = cert2.PrivateKey; // Create a reference to be signed. Reference reference = new Reference(); reference.Uri= String.Empty; reference.Uri = "#" + referenceValue; // Add an enveloped transformation to the reference. XmlDsigEnvelopedSignatureTransform env = new XmlDsigEnvelopedSignatureTransform(); reference.AddTransform(env); // Add the reference to the SignedXml object. sig.AddReference(reference); // Add an RSAKeyValue KeyInfo (optional; helps recipient find key to validate). KeyInfo keyInfo = new KeyInfo(); keyInfo.AddClause(new KeyInfoX509Data(cert2)); sig.KeyInfo = keyInfo; // Compute the signature. sig.ComputeSignature(); // Get the XML representation of the signature and save // it to an XmlElement object. XmlElement xmlDigitalSignature = sig.GetXml(); return xmlDigitalSignature; } To open the page in my client app, string postData = String.Format("SAMLResponse={0}&APID=ap_00001&TARGET={1}", System.Web.HttpUtility.UrlEncode(builder.buildResponse("http://theWLServer/samlacs/acs",attributes)), "http://desiredURL"); webBrowser.Navigate("http://theWLServer/samlacs/acs", "_self", Encoding.UTF8.GetBytes(postData), "Content-Type: application/x-www-form-urlencoded");

Read the article

Processing incorrect mac addresses from 802.11 frames with pcap

- by Quentin Swain

I'm working throurgh a project with pcap and wireless. Following an example posted in response to oe of my earlier questions I am trying to extract the mac addresses from wireless frames. I have created structures for the radiotap header and a basic management frame. For some reason when it comes to trying to output the mac addresses I am printing out the wrong data. When I compare to wireshark I don't see why the radio tap data is printing out correctly but the mac addresses are not. I don't see any additional padding in the hex dump that wireshark displays when i look at the packets and compare the packets that I have captured. I am somewhat famialar with c but not an expert so maybe I am not using the pointers and structures properly could someone help show me what I am doing wrong? Thanks, Quentin // main.c // MacSniffer // #include <pcap.h> #include <string.h> #include <stdlib.h> #define MAXBYTES2CAPTURE 65535 #ifdef WORDS_BIGENDIAN typedef struct frame_control { unsigned int subtype:4; /*frame subtype field*/ unsigned int protoVer:2; /*frame type field*/ unsigned int version:2; /*protocol version*/ unsigned int order:1; unsigned int protected:1; unsigned int moreDate:1; unsigned int power_management:1; unsigned int retry:1; unsigned int moreFrag:1; unsigned int fromDS:1; unsigned int toDS:1; }frame_control; struct ieee80211_radiotap_header{ u_int8_t it_version; u_int8_t it_pad; u_int16_t it_len; u_int32_t it_present; u_int64_t MAC_timestamp; u_int8_t flags; u_int8_t dataRate; u_int16_t channelfrequency; u_int16_t channFreq_pad; u_int16_t channelType; u_int16_t channType_pad; u_int8_t ssiSignal; u_int8_t ssiNoise; u_int8_t antenna; }; #else typedef struct frame_control { unsigned int protoVer:2; /* protocol version*/ unsigned int type:2; /*frame type field (Management,Control,Data)*/ unsigned int subtype:4; /* frame subtype*/ unsigned int toDS:1; /* frame coming from Distribution system */ unsigned int fromDS:1; /*frame coming from Distribution system */ unsigned int moreFrag:1; /* More fragments?*/ unsigned int retry:1; /*was this frame retransmitted*/ unsigned int powMgt:1; /*Power Management*/ unsigned int moreDate:1; /*More Date*/ unsigned int protectedData:1; /*Protected Data*/ unsigned int order:1; /*Order*/ }frame_control; struct ieee80211_radiotap_header{ u_int8_t it_version; u_int8_t it_pad; u_int16_t it_len; u_int32_t it_present; u_int64_t MAC_timestamp; u_int8_t flags; u_int8_t dataRate; u_int16_t channelfrequency; u_int16_t channelType; int ssiSignal:8; int ssiNoise:8; }; #endif struct wi_frame { u_int16_t fc; u_int16_t wi_duration; u_int8_t wi_add1[6]; u_int8_t wi_add2[6]; u_int8_t wi_add3[6]; u_int16_t wi_sequenceControl; // u_int8_t wi_add4[6]; //unsigned int qosControl:2; //unsigned int frameBody[23124]; }; void processPacket(u_char *arg, const struct pcap_pkthdr* pkthdr, const u_char* packet) { int i= 0, *counter = (int *) arg; struct ieee80211_radiotap_header *rh =(struct ieee80211_radiotap_header *)packet; struct wi_frame *fr= (struct wi_frame *)(packet + rh->it_len); u_char *ptr; //printf("Frame Type: %d",fr->wi_fC->type); printf("Packet count: %d\n", ++(*counter)); printf("Received Packet Size: %d\n", pkthdr->len); if(rh->it_version != NULL) { printf("Radiotap Version: %d\n",rh->it_version); } if(rh->it_pad!=NULL) { printf("Radiotap Pad: %d\n",rh->it_pad); } if(rh->it_len != NULL) { printf("Radiotap Length: %d\n",rh->it_len); } if(rh->it_present != NULL) { printf("Radiotap Present: %c\n",rh->it_present); } if(rh->MAC_timestamp != NULL) { printf("Radiotap Timestamp: %u\n",rh->MAC_timestamp); } if(rh->dataRate != NULL) { printf("Radiotap Data Rate: %u\n",rh->dataRate); } if(rh->channelfrequency != NULL) { printf("Radiotap Channel Freq: %u\n",rh->channelfrequency); } if(rh->channelType != NULL) { printf("Radiotap Channel Type: %06x\n",rh->channelType); } if(rh->ssiSignal != NULL) { printf("Radiotap SSI signal: %d\n",rh->ssiSignal); } if(rh->ssiNoise != NULL) { printf("Radiotap SSI Noise: %d\n",rh->ssiNoise); } ptr = fr->wi_add1; int k= 6; printf("Destination Address:"); do{ printf("%s%X",(k==6)?" ":":",*ptr++); } while(--k>0); printf("\n"); ptr = fr->wi_add2; k=0; printf("Source Address:"); do{ printf("%s%X",(k==6)?" ":":",*ptr++); }while(--k>0); printf("\n"); ptr = fr->wi_add3; k=0; do{ printf("%s%X",(k==6)?" ":":",*ptr++); } while(--k>0); printf("\n"); /* for(int j = 0; j < 23124;j++) { if(fr->frameBody[j]!= NULL) { printf("%x",fr->frameBody[j]); } } */ for (i = 0;i<pkthdr->len;i++) { if(isprint(packet[i +rh->it_len])) { printf("%c",packet[i + rh->it_len]); } else{printf(".");} //print newline after each section of the packet if((i%16 ==0 && i!=0) ||(i==pkthdr->len-1)) { printf("\n"); } } return; } int main(int argc, char** argv) { int count = 0; pcap_t* descr = NULL; char errbuf[PCAP_ERRBUF_SIZE], *device = NULL; struct bpf_program fp; char filter[]="wlan broadcast"; const u_char* packet; memset(errbuf,0,PCAP_ERRBUF_SIZE); device = argv[1]; if(device == NULL) { fprintf(stdout,"Supply a device name "); } descr = pcap_create(device,errbuf); pcap_set_rfmon(descr,1); pcap_set_promisc(descr,1); pcap_set_snaplen(descr,30); pcap_set_timeout(descr,10000); pcap_activate(descr); int dl =pcap_datalink(descr); printf("The Data Link type is %s",pcap_datalink_val_to_name(dl)); //pcap_dispatch(descr,MAXBYTES2CAPTURE,1,512,errbuf); //Open device in promiscuous mode //descr = pcap_open_live(device,MAXBYTES2CAPTURE,1,512,errbuf); /* if(pcap_compile(descr,&fp,filter,0,PCAP_NETMASK_UNKNOWN)==-1) { fprintf(stderr,"Error compiling filter\n"); exit(1); } if(pcap_setfilter(descr,&fp)==-1) { fprintf(stderr,"Error setting filter\n"); exit(1); } */ pcap_loop(descr,0, processPacket, (u_char *) &count); return 0; }

Read the article

My App crashes when launched on my Iphone

- by Miky Mike

hi guys, I have a problem here : my app crashed on my Iphone (JB) though Xcode doesn't complain about anything. The app works fine on the simulator though. However, there is this in the device logs : Thread 0 Crashed: 0 libSystem.B.dylib 0x00078ac8 kill + 8 1 libSystem.B.dylib 0x00078ab8 kill + 4 2 libSystem.B.dylib 0x00078aaa raise + 10 3 libSystem.B.dylib 0x0008d03a abort + 50 4 libstdc++.6.dylib 0x00044a20 __gnu_cxx::__verbose_terminate_handler() + 376 5 libobjc.A.dylib 0x00005958 _objc_terminate + 104 6 libstdc++.6.dylib 0x00042df2 _cxxabiv1::_terminate(void (*)()) + 46 7 libstdc++.6.dylib 0x00042e46 std::terminate() + 10 8 libstdc++.6.dylib 0x00042f16 __cxa_throw + 78 9 libobjc.A.dylib 0x00004838 objc_exception_throw + 64 10 CoreFoundation 0x0009fd0e +[NSException raise:format:arguments:] + 62 11 CoreFoundation 0x0009fd48 +[NSException raise:format:] + 28 12 Foundation 0x000125d8 -[NSURL(NSURL) initFileURLWithPath:] + 64 13 Foundation 0x000371e0 +[NSURL(NSURL) fileURLWithPath:] + 24 14 TheLearningMachine 0x00002d08 0x1000 + 7432 15 TheLearningMachine 0x00002e8c 0x1000 + 7820 16 TheLearningMachine 0x00002be4 0x1000 + 7140 17 TheLearningMachine 0x000029b6 0x1000 + 6582 18 UIKit 0x0000e47a -[UIApplication _callInitializationDelegatesForURL:payload:suspended:] + 766 19 UIKit 0x000049e0 -[UIApplication _runWithURL:payload:launchOrientation:statusBarStyle:statusBarHidden:] + 200 20 UIKit 0x0005dfd6 -[UIApplication handleEvent:withNewEvent:] + 1390 21 UIKit 0x0005d8fa -[UIApplication sendEvent:] + 38 22 UIKit 0x0005d330 _UIApplicationHandleEvent + 5104 23 GraphicsServices 0x00005044 PurpleEventCallback + 660 24 CoreFoundation 0x00034cdc __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION + 20 25 CoreFoundation 0x00034ca0 __CFRunLoopDoSource1 + 160 26 CoreFoundation 0x00027566 __CFRunLoopRun + 514 27 CoreFoundation 0x00027270 CFRunLoopRunSpecific + 224 28 CoreFoundation 0x00027178 CFRunLoopRunInMode + 52 29 UIKit 0x000040fc -[UIApplication _run] + 364 30 UIKit 0x00002128 UIApplicationMain + 664 31 TheLearningMachine 0x00002948 0x1000 + 6472 32 TheLearningMachine 0x000028fc 0x1000 + 6396 Thread 1: 0 libSystem.B.dylib 0x0002d330 kevent + 24 1 libSystem.B.dylib 0x000d6b6c _dispatch_mgr_invoke + 88 2 libSystem.B.dylib 0x000d65bc _dispatch_queue_invoke + 96 3 libSystem.B.dylib 0x000d675c _dispatch_worker_thread2 + 120 4 libSystem.B.dylib 0x0007a67a _pthread_wqthread + 258 5 libSystem.B.dylib 0x00073190 start_wqthread + 0 Thread 2: 0 libSystem.B.dylib 0x0007b19c __workq_kernreturn + 8 1 libSystem.B.dylib 0x0007a790 _pthread_wqthread + 536 2 libSystem.B.dylib 0x00073190 start_wqthread + 0 Thread 3: 0 libSystem.B.dylib 0x00000c98 mach_msg_trap + 20 1 libSystem.B.dylib 0x00002d64 mach_msg + 44 2 CoreFoundation 0x00027c38 __CFRunLoopServiceMachPort + 88 3 CoreFoundation 0x000274c2 __CFRunLoopRun + 350 4 CoreFoundation 0x00027270 CFRunLoopRunSpecific + 224 5 CoreFoundation 0x00027178 CFRunLoopRunInMode + 52 6 WebCore 0x000024e2 RunWebThread(void*) + 362 7 libSystem.B.dylib 0x0007a27e _pthread_start + 242 8 libSystem.B.dylib 0x0006f2a8 thread_start + 0 Thread 0 crashed with ARM Thread State: r0: 0x00000000 r1: 0x00000000 r2: 0x00000001 r3: 0x3e0862b4 r4: 0x00000006 r5: 0x0015a2ec r6: 0x2fffe090 r7: 0x2fffe0a0 r8: 0x3e1a378c r9: 0x00000065 r10: 0x33028e5a r11: 0x3e1ab89c ip: 0x00000025 sp: 0x2fffe0a0 lr: 0x30277abf pc: 0x30277ac8 cpsr: 0x000f0010 Any idea what the problem can be ? I've already spent my whole day on that, but... I'm stuck. Thanks in advance... Miky Mike Ok, Here is more then from the console, I get this : This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys002 Loading program into debugger… Program loaded. target remote-mobile /tmp/.XcodeGDBRemote-17280-65 Switching to remote-macosx protocol mem 0x1000 0x3fffffff cache mem 0x40000000 0xffffffff none mem 0x00000000 0x0fff none run Running… Error launching remote program: failed to get the task for process 456. Error launching remote program: failed to get the task for process 456. The program being debugged is not being run. The program being debugged is not being run. [Session started at 2010-12-23 20:33:33 +0100.] GNU gdb 6.3.50-20050815 (Apple version gdb-1472) (Thu Aug 5 05:54:10 UTC 2010) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys004 Loading program into debugger… Program loaded. target remote-mobile /tmp/.XcodeGDBRemote-17280-72 Switching to remote-macosx protocol mem 0x1000 0x3fffffff cache mem 0x40000000 0xffffffff none mem 0x00000000 0x0fff none run Running… Error launching remote program: failed to get the task for process 508. Error launching remote program: failed to get the task for process 508. The program being debugged is not being run. The program being debugged is not being run. And here is the code page that calls the URL import "TheLearningMachineAppDelegate.h" import "RootViewController.h" @implementation TheLearningMachineAppDelegate @synthesize window; @synthesize navigationController; pragma mark - pragma mark Application lifecycle (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions { RootViewController *rootViewController = (RootViewController *)[navigationController topViewController]; rootViewController.managedObjectContext = self.managedObjectContext; [window addSubview:[navigationController view]]; [window makeKeyAndVisible]; return YES; } (void)applicationWillResignActive:(UIApplication )application { / Sent when the application is about to move from active to inactive state. This can occur for certain types of temporary interruptions (such as an incoming phone call or SMS message) or when the user quits the application and it begins the transition to the background state. Use this method to pause ongoing tasks, disable timers, and throttle down OpenGL ES frame rates. Games should use this method to pause the game. */ } (void)applicationDidEnterBackground:(UIApplication *)application { [self saveContext]; } (void)applicationWillEnterForeground:(UIApplication )application { / Called as part of the transition from the background to the inactive state: here you can undo many of the changes made on entering the background. */ } (void)applicationDidBecomeActive:(UIApplication )application { / Restart any tasks that were paused (or not yet started) while the application was inactive. If the application was previously in the background, optionally refresh the user interface. */ } // Method that saves the managed object context before the application terminates. (void)applicationWillTerminate:(UIApplication *)application { [self saveContext]; } (void)saveContext { NSError *error = nil; if (managedObjectContext != nil) { if ([managedObjectContext hasChanges] && ![managedObjectContext save:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); //Replace this implementation with code to handle the error appropriately. //abort() causes the application to generate a crash log and terminate. You should not use this function in a shipping application, although it may be useful during development. If it is not possible to recover from the error, display an alert panel that instructs the user to quit the application by pressing the Home button. } } } pragma mark - pragma mark Core Data stack // Returns the managed object context for the application. (NSManagedObjectContext *)managedObjectContext { if (managedObjectContext != nil) { return managedObjectContext; } NSPersistentStoreCoordinator *coordinator = [self persistentStoreCoordinator]; if (coordinator != nil) { managedObjectContext = [[NSManagedObjectContext alloc] init]; [managedObjectContext setPersistentStoreCoordinator:coordinator]; } return managedObjectContext; } // Returns the managed object model for the application. (NSManagedObjectModel *)managedObjectModel { if (managedObjectModel != nil) { return managedObjectModel; } NSString *modelPath = [[NSBundle mainBundle] pathForResource:@"TheLearningMachine" ofType:@"momd"]; NSURL *modelURL = [NSURL fileURLWithPath:modelPath]; managedObjectModel = [[NSManagedObjectModel alloc] initWithContentsOfURL:modelURL]; return managedObjectModel; } pragma mark - pragma mark Application's Documents directory // Returns the path to the application's Documents directory. - (NSString *)applicationDocumentsDirectory { return [NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES) lastObject]; } // Returns the persistent store coordinator for the application. - (NSPersistentStoreCoordinator *)persistentStoreCoordinator { if (persistentStoreCoordinator != nil) { return persistentStoreCoordinator; } NSURL *storeURL = [NSURL fileURLWithPath: [[self applicationDocumentsDirectory] stringByAppendingPathComponent: @"TheLearningMachine.sqlite"]]; NSError *error = nil; persistentStoreCoordinator = [[NSPersistentStoreCoordinator alloc] initWithManagedObjectModel:[self managedObjectModel]]; if (![persistentStoreCoordinator addPersistentStoreWithType:NSSQLiteStoreType configuration:nil URL:storeURL options:nil error:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } return persistentStoreCoordinator; } pragma mark - pragma mark Memory management (void)applicationDidReceiveMemoryWarning:(UIApplication )application { / Free up as much memory as possible by purging cached data objects that can be recreated (or reloaded from disk) later. */ } (void)dealloc { [managedObjectContext release]; [managedObjectModel release]; [persistentStoreCoordinator release]; [window release]; [super dealloc]; } @end

Read the article

Log call information whenever there is a phone call.

- by linuxdoniv

Hi, I have written the android application and I want the application to send the call information whenever there is an incoming call and it ends. This way I would be sending all calls to the server irrespective of size of the call log. Here is the code public class PhoneInfo extends BroadcastReceiver { private int incoming_call = 0; private Cursor c; Context context; public void onReceive(Context con, Intent intent) { c = con.getContentResolver().query( android.provider.CallLog.Calls.CONTENT_URI, null, null, null, android.provider.CallLog.Calls.DATE+ " DESC"); context = con; IncomingCallListener phoneListener=new IncomingCallListener(); TelephonyManager telephony = (TelephonyManager) con.getSystemService(Context.TELEPHONY_SERVICE); telephony.listen(phoneListener,PhoneStateListener.LISTEN_CALL_STATE); } public class IncomingCallListener extends PhoneStateListener { public void onCallStateChanged(int state,String incomingNumber){ switch(state){ case TelephonyManager.CALL_STATE_IDLE: if(incoming_call == 1){ CollectSendCallInfo(); incoming_call = 0; } break; case TelephonyManager.CALL_STATE_OFFHOOK: break; case TelephonyManager.CALL_STATE_RINGING: incoming_call = 1; break; } } } private void CollectSendCallInfo() { int numberColumn = c.getColumnIndex( android.provider.CallLog.Calls.NUMBER); int dateColumn = c.getColumnIndex( android.provider.CallLog.Calls.DATE); int typeColumn = c.getColumnIndex( android.provider.CallLog.Calls.TYPE); int durationColumn=c.getColumnIndex( android.provider.CallLog.Calls.DURATION); ArrayList<String> callList = new ArrayList<String>(); try{ boolean moveToFirst=c.moveToFirst(); } catch(Exception e) { ; // could not move to the first row. return; } int row_count = c.getCount(); int loop_index = 0; int is_latest_call_read = 0; String callerPhonenumber = c.getString(numberColumn); int callDate = c.getInt(dateColumn); int callType = c.getInt(typeColumn); int duration=c.getInt(durationColumn); while((loop_index <row_count) && (is_latest_call_read != 1)){ switch(callType){ case android.provider.CallLog.Calls.INCOMING_TYPE: is_latest_call_read = 1; break; case android.provider.CallLog.Calls.MISSED_TYPE: break; case android.provider.CallLog.Calls.OUTGOING_TYPE: break; } loop_index++; c.moveToNext(); } SendCallInfo(callerPhonenumber, Integer.toString(duration), Integer.toString(callDate)); } private void SendCallInfo(String callerPhonenumber, String callDuration, String callDate) { JSONObject j = new JSONObject(); try { j.put("Caller", callerPhonenumber); j.put("Duration", callDuration); j.put("CallDate", callDate); } catch (JSONException e) { Toast.makeText(context, "Json object failure!", Toast.LENGTH_LONG).show(); } String url = "http://xxxxxx.xxx.xx/xxxx/xxx.php"; Map<String, String> kvPairs = new HashMap<String, String>(); kvPairs.put("phonecall", j.toString()); HttpResponse re; try { re = doPost(url, kvPairs); String temp; try { temp = EntityUtils.toString(re.getEntity()); if (temp.compareTo("SUCCESS") == 0) { ; } else ; } catch (ParseException e1) { Toast.makeText(context, "Parse Exception in response!", Toast.LENGTH_LONG) .show(); e1.printStackTrace(); } catch (IOException e1) { Toast.makeText(context, "Io exception in response!", Toast.LENGTH_LONG).show(); e1.printStackTrace(); } } catch (ClientProtocolException e1) { Toast.makeText(context, "Client Protocol Exception!", Toast.LENGTH_LONG).show(); e1.printStackTrace(); } catch (IOException e1) { Toast.makeText(context, "Client Protocol Io exception!", Toast.LENGTH_LONG).show(); e1.printStackTrace(); } } and here is the manifest file <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION"></uses-permission> <uses-permission android:name="android.permission.INTERNET"></uses-permission> <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"></uses-permission> <uses-permission android:name="android.permission.ACCESS_LOCATION_EXTRA_COMMANDS"></uses-permission> <uses-permission android:name="android.permission.INSTALL_LOCATION_PROVIDER"></uses-permission> <uses-permission android:name="android.permission.SET_DEBUG_APP"></uses-permission> <uses-permission android:name="android.permission.RECEIVE_SMS"></uses-permission> <uses-permission android:name="android.permission.READ_PHONE_STATE"></uses-permission> <uses-permission android:name="android.permission.READ_SMS"></uses-permission> <application android:icon="@drawable/icon" android:label="@string/app_name"> <activity android:name=".Friend" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <activity android:name=".LoginInfo" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.DEFAULT" /> </intent-filter> </activity> <service android:exported="true" android:enabled="true" android:name=".GeoUpdateService" > </service> <receiver android:name=".SmsInfo" > <intent-filter> <action android:name= "android.provider.Telephony.SMS_RECEIVED" /> </intent-filter> </receiver> <receiver android:name=".PhoneInfo" > <intent-filter> <action android:name="android.intent.action.PHONE_STATE"></action> </intent-filter> </receiver> </application> The application just crashes when there is an incoming call.. i have been able to log the information about incoming SMS, but this call info logging is failing. Thanks for any help.

Read the article

Deadlock in SQL Server 2005! Two real-time bulk upserts are fighting. WHY?

- by skimania

Here's the scenario: I've got a table called MarketDataCurrent (MDC) that has live updating stock prices. I've got one process called 'LiveFeed' which reads prices streaming from the wire, queues up inserts, and uses a 'bulk upload to temp table then insert/update to MDC table.' (BulkUpsert) I've got another process which then reads this data, computes other data, and then saves the results back into the same table, using a similar BulkUpsert stored proc. Thirdly, there are a multitude of users running a C# Gui polling the MDC table and reading updates from it. Now, during the day when the data is changing rapidly, things run pretty smoothly, but then, after market hours, we've recently started seeing an increasing number of Deadlock exceptions coming out of the database, nowadays we see 10-20 a day. The imporant thing to note here is that these happen when the values are NOT changing. Here's all the relevant info: Table Def: CREATE TABLE [dbo].[MarketDataCurrent]( [MDID] [int] NOT NULL, [LastUpdate] [datetime] NOT NULL, [Value] [float] NOT NULL, [Source] [varchar](20) NULL, CONSTRAINT [PK_MarketDataCurrent] PRIMARY KEY CLUSTERED ( [MDID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] - I've got a Sql Profiler Trace Running, catching the deadlocks, and here's what all the graphs look like. Process 258 is called the following 'BulkUpsert' stored proc, repeatedly, while 73 is calling the next one: ALTER proc [dbo].[MarketDataCurrent_BulkUpload] @updateTime datetime, @source varchar(10) as begin transaction update c with (rowlock) set LastUpdate = getdate(), Value = t.Value, Source = @source from MarketDataCurrent c INNER JOIN #MDTUP t ON c.MDID = t.mdid where c.lastUpdate < @updateTime and c.mdid not in (select mdid from MarketData where LiveFeedTicker is not null and PriceSource like 'LiveFeed.%') and c.value <> t.value insert into MarketDataCurrent with (rowlock) select MDID, getdate(), Value, @source from #MDTUP where mdid not in (select mdid from MarketDataCurrent with (nolock)) and mdid not in (select mdid from MarketData where LiveFeedTicker is not null and PriceSource like 'LiveFeed.%') commit And the other one: ALTER PROCEDURE [dbo].[MarketDataCurrent_LiveFeedUpload] AS begin transaction -- Update existing mdid UPDATE c WITH (ROWLOCK) SET LastUpdate = t.LastUpdate, Value = t.Value, Source = t.Source FROM MarketDataCurrent c INNER JOIN #TEMPTABLE2 t ON c.MDID = t.mdid; -- Insert new MDID INSERT INTO MarketDataCurrent with (ROWLOCK) SELECT * FROM #TEMPTABLE2 WHERE MDID NOT IN (SELECT MDID FROM MarketDataCurrent with (NOLOCK)) -- Clean up the temp table DELETE #TEMPTABLE2 commit To clarify, those Temp Tables are being created by the C# code on the same connection and are populated using the C# SqlBulkCopy class. To me it looks like it's deadlocking on the PK of the table, so I tried removing that PK and switching to a Unique Constraint instead but that increased the number of deadlocks 10-fold. I'm totally lost as to what to do about this situation and am open to just about any suggestion. HELP!! In response to the request for the XDL, here it is: <deadlock-list> <deadlock victim="processc19978"> <process-list> <process id="processaf0b68" taskpriority="0" logused="0" waitresource="KEY: 6:72057594090487808 (d900ed5a6cc6)" waittime="718" ownerId="1102128174" transactionname="user_transaction" lasttranstarted="2010-06-11T16:30:44.750" XDES="0xffffffff817f9a40" lockMode="U" schedulerid="3" kpid="8228" status="suspended" spid="73" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-06-11T16:30:44.750" lastbatchcompleted="2010-06-11T16:30:44.750" clientapp=".Net SqlClient Data Provider" hostname="RISKAPPS_VM" hostpid="3836" loginname="RiskOpt" isolationlevel="read committed (2)" xactid="1102128174" currentdb="6" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128056"> <executionStack> <frame procname="MKP_RISKDB.dbo.MarketDataCurrent_BulkUpload" line="28" stmtstart="1062" stmtend="1720" sqlhandle="0x03000600a28e5e4ef4fd8e00849d00000100000000000000"> UPDATE c WITH (ROWLOCK) SET LastUpdate = getdate(), Value = t.Value, Source = @source FROM MarketDataCurrent c INNER JOIN #MDTUP t ON c.MDID = t.mdid WHERE c.lastUpdate < @updateTime and c.mdid not in (select mdid from MarketData where BloombergTicker is not null and PriceSource like 'Blbg.%') and c.value <> t.value </frame> <frame procname="adhoc" line="1" stmtstart="88" sqlhandle="0x01000600c1653d0598706ca7000000000000000000000000"> exec MarketDataCurrent_BulkUpload @clearBefore, @source </frame> <frame procname="unknown" line="1" sqlhandle="0x000000000000000000000000000000000000000000000000"> unknown </frame> </executionStack> <inputbuf> (@clearBefore datetime,@source nvarchar(10))exec MarketDataCurrent_BulkUpload @clearBefore, @source </inputbuf> </process> <process id="processc19978" taskpriority="0" logused="0" waitresource="KEY: 6:72057594090487808 (74008e31572b)" waittime="718" ownerId="1102128228" transactionname="user_transaction" lasttranstarted="2010-06-11T16:30:44.780" XDES="0x380be9d8" lockMode="U" schedulerid="5" kpid="8464" status="suspended" spid="248" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-06-11T16:30:44.780" lastbatchcompleted="2010-06-11T16:30:44.780" clientapp=".Net SqlClient Data Provider" hostname="RISKBBG_VM" hostpid="4480" loginname="RiskOpt" isolationlevel="read committed (2)" xactid="1102128228" currentdb="6" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128056"> <executionStack> <frame procname="MKP_RISKDB.dbo.MarketDataCurrentBlbgRtUpload" line="14" stmtstart="840" stmtend="1220" sqlhandle="0x03000600005f9d24c8878f00849d00000100000000000000"> UPDATE c WITH (ROWLOCK) SET LastUpdate = t.LastUpdate, Value = t.Value, Source = t.Source FROM MarketDataCurrent c INNER JOIN #TEMPTABLE2 t ON c.MDID = t.mdid; -- Insert new MDID </frame> <frame procname="adhoc" line="1" sqlhandle="0x010006004a58132228bf8d73000000000000000000000000"> MarketDataCurrentBlbgRtUpload </frame> </executionStack> <inputbuf> MarketDataCurrentBlbgRtUpload </inputbuf> </process> </process-list> <resource-list> <keylock hobtid="72057594090487808" dbid="6" objectname="MKP_RISKDB.dbo.MarketDataCurrent" indexname="PK_MarketDataCurrent" id="lock5ba77b00" mode="U" associatedObjectId="72057594090487808"> <owner-list> <owner id="processc19978" mode="U"/> </owner-list> <waiter-list> <waiter id="processaf0b68" mode="U" requestType="wait"/> </waiter-list> </keylock> <keylock hobtid="72057594090487808" dbid="6" objectname="MKP_RISKDB.dbo.MarketDataCurrent" indexname="PK_MarketDataCurrent" id="lock65dca340" mode="U" associatedObjectId="72057594090487808"> <owner-list> <owner id="processaf0b68" mode="U"/> </owner-list> <waiter-list> <waiter id="processc19978" mode="U" requestType="wait"/> </waiter-list> </keylock> </resource-list> </deadlock> </deadlock-list>

Read the article

How to generate DELETE statements in PL/SQL, based on the tables FK relations?

- by The chicken in the kitchen

Is it possible via script/tool to generate authomatically many delete statements based on the tables fk relations, using Oracle PL/SQL? In example: I have the table: CHICKEN (CHICKEN_CODE NUMBER) and there are 30 tables with fk references to its CHICKEN_CODE that I need to delete; there are also other 150 tables foreign-key-linked to that 30 tables that I need to delete first. Is there some tool/script PL/SQL that I can run in order to generate all the necessary delete statements based on the FK relations for me? (by the way, I know about cascade delete on the relations, but please pay attention: I CAN'T USE IT IN MY PRODUCTION DATABASE, because it's dangerous!) I'm using Oracle DataBase 10G R2. This is the result I've written, but it is not recursive: This is a view I have previously written, but of course it is not recursive! CREATE OR REPLACE FORCE VIEW RUN ( OWNER_1, CONSTRAINT_NAME_1, TABLE_NAME_1, TABLE_NAME, VINCOLO ) AS SELECT OWNER_1, CONSTRAINT_NAME_1, TABLE_NAME_1, TABLE_NAME, '(' || LTRIM ( EXTRACT (XMLAGG (XMLELEMENT ("x", ',' || COLUMN_NAME)), '/x/text()'), ',') || ')' VINCOLO FROM ( SELECT CON1.OWNER OWNER_1, CON1.TABLE_NAME TABLE_NAME_1, CON1.CONSTRAINT_NAME CONSTRAINT_NAME_1, CON1.DELETE_RULE, CON1.STATUS, CON.TABLE_NAME, CON.CONSTRAINT_NAME, COL.POSITION, COL.COLUMN_NAME FROM DBA_CONSTRAINTS CON, DBA_CONS_COLUMNS COL, DBA_CONSTRAINTS CON1 WHERE CON.OWNER = 'TABLE_OWNER' AND CON.TABLE_NAME = 'TABLE_OWNED' AND ( (CON.CONSTRAINT_TYPE = 'P') OR (CON.CONSTRAINT_TYPE = 'U')) AND COL.TABLE_NAME = CON1.TABLE_NAME AND COL.CONSTRAINT_NAME = CON1.CONSTRAINT_NAME --AND CON1.OWNER = CON.OWNER AND CON1.R_CONSTRAINT_NAME = CON.CONSTRAINT_NAME AND CON1.CONSTRAINT_TYPE = 'R' GROUP BY CON1.OWNER, CON1.TABLE_NAME, CON1.CONSTRAINT_NAME, CON1.DELETE_RULE, CON1.STATUS, CON.TABLE_NAME, CON.CONSTRAINT_NAME, COL.POSITION, COL.COLUMN_NAME) GROUP BY OWNER_1, CONSTRAINT_NAME_1, TABLE_NAME_1, TABLE_NAME; ... and it contains the error of using DBA_CONSTRAINTS instead of ALL_CONSTRAINTS... Please pay attention to this: http://stackoverflow.com/questions/485581/generate-delete-statement-from-foreign-key-relationships-in-sql-2008/2677145#2677145 Another user has just written it in SQL SERVER 2008, anyone is able to convert to Oracle 10G PL/SQL? I am not able to... :-( This is the code written by another user in SQL SERVER 2008: DECLARE @COLUMN_NAME AS sysname DECLARE @TABLE_NAME AS sysname DECLARE @IDValue AS int SET @COLUMN_NAME = '<Your COLUMN_NAME here>' SET @TABLE_NAME = '<Your TABLE_NAME here>' SET @IDValue = 123456789 DECLARE @sql AS varchar(max) ; WITH RELATED_COLUMNS AS ( SELECT QUOTENAME(c.TABLE_SCHEMA) + '.' + QUOTENAME(c.TABLE_NAME) AS [OBJECT_NAME] ,c.COLUMN_NAME FROM PBANKDW.INFORMATION_SCHEMA.COLUMNS AS c WITH (NOLOCK) INNER JOIN PBANKDW.INFORMATION_SCHEMA.TABLES AS t WITH (NOLOCK) ON c.TABLE_CATALOG = t.TABLE_CATALOG AND c.TABLE_SCHEMA = t.TABLE_SCHEMA AND c.TABLE_NAME = t.TABLE_NAME AND t.TABLE_TYPE = 'BASE TABLE' INNER JOIN ( SELECT rc.CONSTRAINT_CATALOG ,rc.CONSTRAINT_SCHEMA ,lkc.TABLE_NAME ,lkc.COLUMN_NAME FROM PBANKDW.INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS rc WITH (NOLOCK) INNER JOIN PBANKDW.INFORMATION_SCHEMA.KEY_COLUMN_USAGE lkc WITH (NOLOCK) ON lkc.CONSTRAINT_CATALOG = rc.CONSTRAINT_CATALOG AND lkc.CONSTRAINT_SCHEMA = rc.CONSTRAINT_SCHEMA AND lkc.CONSTRAINT_NAME = rc.CONSTRAINT_NAME INNER JOIN PBANKDW.INFORMATION_SCHEMA.TABLE_CONSTRAINTS tc WITH (NOLOCK) ON rc.CONSTRAINT_CATALOG = tc.CONSTRAINT_CATALOG AND rc.CONSTRAINT_SCHEMA = tc.CONSTRAINT_SCHEMA AND rc.UNIQUE_CONSTRAINT_NAME = tc.CONSTRAINT_NAME INNER JOIN PBANKDW.INFORMATION_SCHEMA.KEY_COLUMN_USAGE rkc WITH (NOLOCK) ON rkc.CONSTRAINT_CATALOG = tc.CONSTRAINT_CATALOG AND rkc.CONSTRAINT_SCHEMA = tc.CONSTRAINT_SCHEMA AND rkc.CONSTRAINT_NAME = tc.CONSTRAINT_NAME WHERE rkc.COLUMN_NAME = @COLUMN_NAME AND rkc.TABLE_NAME = @TABLE_NAME ) AS j ON j.CONSTRAINT_CATALOG = c.TABLE_CATALOG AND j.CONSTRAINT_SCHEMA = c.TABLE_SCHEMA AND j.TABLE_NAME = c.TABLE_NAME AND j.COLUMN_NAME = c.COLUMN_NAME ) SELECT @sql = COALESCE(@sql, '') + 'DELETE FROM ' + [OBJECT_NAME] + ' WHERE ' + [COLUMN_NAME] + ' = ' + CONVERT(varchar, @IDValue) + CHAR(13) + CHAR(10) FROM RELATED_COLUMNS PRINT @sql Thank to Charles, this is the latest not working release of the software, I have added a parameter with the OWNER because the referential integrities propagate through about 5 other Oracle users (!!!): CREATE OR REPLACE PROCEDURE delete_cascade ( parent_table VARCHAR2, parent_table_owner VARCHAR2) IS cons_name VARCHAR2 (30); tab_name VARCHAR2 (30); tab_name_owner VARCHAR2 (30); parent_cons VARCHAR2 (30); parent_col VARCHAR2 (30); delete1 VARCHAR (500); delete2 VARCHAR (500); delete_command VARCHAR (4000); CURSOR cons_cursor IS SELECT constraint_name, r_constraint_name, table_name, constraint_type FROM all_constraints WHERE constraint_type = 'R' AND r_constraint_name IN (SELECT constraint_name FROM all_constraints WHERE constraint_type IN ('P', 'U') AND table_name = parent_table AND owner = parent_table_owner) AND delete_rule = 'NO ACTION'; CURSOR tabs_cursor IS SELECT DISTINCT table_name FROM all_cons_columns WHERE constraint_name = cons_name; CURSOR child_cols_cursor IS SELECT column_name, position FROM all_cons_columns WHERE constraint_name = cons_name AND table_name = tab_name; BEGIN FOR cons IN cons_cursor LOOP cons_name := cons.constraint_name; parent_cons := cons.r_constraint_name; SELECT DISTINCT table_name, owner INTO tab_name, tab_name_owner FROM all_cons_columns WHERE constraint_name = cons_name; delete_cascade (tab_name, tab_name_owner); delete_command := ''; delete1 := ''; delete2 := ''; FOR col IN child_cols_cursor LOOP SELECT DISTINCT column_name INTO parent_col FROM all_cons_columns WHERE constraint_name = parent_cons AND position = col.position; IF delete1 IS NULL THEN delete1 := col.column_name; ELSE delete1 := delete1 || ', ' || col.column_name; END IF; IF delete2 IS NULL THEN delete2 := parent_col; ELSE delete2 := delete2 || ', ' || parent_col; END IF; END LOOP; delete_command := 'delete from ' || tab_name_owner || '.' || tab_name || ' where (' || delete1 || ') in (select ' || delete2 || ' from ' || parent_table_owner || '.' || parent_table || ');'; INSERT INTO ris VALUES (SEQUENCE_COMANDI.NEXTVAL, delete_command); COMMIT; END LOOP; END; / In the cursor CONS_CURSOR I have added the condition: AND delete_rule = 'NO ACTION'; in order to avoid deletion in case of referential integrities with DELETE_RULE = 'CASCADE' or DELETE_RULE = 'SET NULL'. Now I have tried to turn from stored procedure to stored function, but the delete statements are not correct: CREATE OR REPLACE FUNCTION deletecascade ( parent_table VARCHAR2, parent_table_owner VARCHAR2) RETURN VARCHAR2 IS cons_name VARCHAR2 (30); tab_name VARCHAR2 (30); tab_name_owner VARCHAR2 (30); parent_cons VARCHAR2 (30); parent_col VARCHAR2 (30); delete1 VARCHAR (500); delete2 VARCHAR (500); delete_command VARCHAR (4000); AT_LEAST_ONE_ITERATION NUMBER DEFAULT 0; CURSOR cons_cursor IS SELECT constraint_name, r_constraint_name, table_name, constraint_type FROM all_constraints WHERE constraint_type = 'R' AND r_constraint_name IN (SELECT constraint_name FROM all_constraints WHERE constraint_type IN ('P', 'U') AND table_name = parent_table AND owner = parent_table_owner) AND delete_rule = 'NO ACTION'; CURSOR tabs_cursor IS SELECT DISTINCT table_name FROM all_cons_columns WHERE constraint_name = cons_name; CURSOR child_cols_cursor IS SELECT column_name, position FROM all_cons_columns WHERE constraint_name = cons_name AND table_name = tab_name; BEGIN FOR cons IN cons_cursor LOOP AT_LEAST_ONE_ITERATION := 1; cons_name := cons.constraint_name; parent_cons := cons.r_constraint_name; SELECT DISTINCT table_name, owner INTO tab_name, tab_name_owner FROM all_cons_columns WHERE constraint_name = cons_name; delete1 := ''; delete2 := ''; FOR col IN child_cols_cursor LOOP SELECT DISTINCT column_name INTO parent_col FROM all_cons_columns WHERE constraint_name = parent_cons AND position = col.position; IF delete1 IS NULL THEN delete1 := col.column_name; ELSE delete1 := delete1 || ', ' || col.column_name; END IF; IF delete2 IS NULL THEN delete2 := parent_col; ELSE delete2 := delete2 || ', ' || parent_col; END IF; END LOOP; delete_command := 'delete from ' || tab_name_owner || '.' || tab_name || ' where (' || delete1 || ') in (select ' || delete2 || ' from ' || parent_table_owner || '.' || parent_table || ');' || deletecascade (tab_name, tab_name_owner); INSERT INTO ris VALUES (SEQUENCE_COMANDI.NEXTVAL, delete_command); COMMIT; END LOOP; IF AT_LEAST_ONE_ITERATION = 1 THEN RETURN ' where COD_CHICKEN = V_CHICKEN AND COD_NATION = V_NATION;'; ELSE RETURN NULL; END IF; END; / Please assume that V_CHICKEN and V_NATION are the criteria to select the CHICKEN to delete from the root table: the condition is: "where COD_CHICKEN = V_CHICKEN AND COD_NATION = V_NATION" on the root table.

Read the article

Building a better mouse-trap – Improving the creation of XML Message Requests using Reflection, XML & XSLT

- by paulschapman

Introduction The way I previously created messages to send to the GovTalk service I used the XMLDocument to create the request. While this worked it left a number of problems; not least that for every message a special function would need to created. This is OK for the short term but the biggest cost in any software project is maintenance and this would be a headache to maintain. So the following is a somewhat better way of achieving the same thing. For the purposes of this article I am going to be using the CompanyNumberSearch request of the GovTalk service – although this technique would work for any service that accepted XML. The C# functions which send and receive the messages remain the same. The magic sauce in this is the XSLT which defines the structure of the request, and the use of objects in conjunction with reflection to provide the content. It is a bit like Sweet Chilli Sauce added to Chicken on a bed of rice. So on to the Sweet Chilli Sauce The Sweet Chilli Sauce The request to search for a company based on it’s number is as follows; <GovTalkMessage xsi:schemaLocation="http://www.govtalk.gov.uk/CM/envelope http://xmlgw.companieshouse.gov.uk/v1-0/schema/Egov_ch-v2-0.xsd" xmlns="http://www.govtalk.gov.uk/CM/envelope" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" > <EnvelopeVersion>1.0</EnvelopeVersion> <Header> <MessageDetails> <Class>NumberSearch</Class> <Qualifier>request</Qualifier> <TransactionID>1</TransactionID> </MessageDetails> <SenderDetails> <IDAuthentication> <SenderID>????????????????????????????????</SenderID> <Authentication> <Method>CHMD5</Method> <Value>????????????????????????????????</Value> </Authentication> </IDAuthentication> </SenderDetails> </Header> <GovTalkDetails> <Keys/> </GovTalkDetails> <Body> <NumberSearchRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlgw.companieshouse.gov.uk/v1-0/schema/NumberSearch.xsd"> <PartialCompanyNumber>99999999</PartialCompanyNumber> <DataSet>LIVE</DataSet> <SearchRows>1</SearchRows> </NumberSearchRequest> </Body> </GovTalkMessage> This is the XML that we send to the GovTalk Service and we get back a list of companies that match the criteria passed A message is structured in two parts; The envelope which identifies the person sending the request, with the name of the request, and the body which gives the detail of the company we are looking for. The Chilli What makes it possible is the use of XSLT to define the message – and serialization to convert each request object into XML. To start we need to create an object which will represent the contents of the message we are sending. However there is a common properties in all the messages that we send to Companies House. These properties are as follows SenderId – the id of the person sending the message SenderPassword – the password associated with Id TransactionId – Unique identifier for the message AuthenticationValue – authenticates the request Because these properties are unique to the Companies House message, and because they are shared with all messages they are perfect candidates for a base class. The class is as follows; using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Security.Cryptography; using System.Text; using System.Text.RegularExpressions; using Microsoft.WindowsAzure.ServiceRuntime; namespace CompanyHub.Services { public class GovTalkRequest { public GovTalkRequest() { try { SenderID = RoleEnvironment.GetConfigurationSettingValue("SenderId"); SenderPassword = RoleEnvironment.GetConfigurationSettingValue("SenderPassword"); TransactionId = DateTime.Now.Ticks.ToString(); AuthenticationValue = EncodePassword(String.Format("{0}{1}{2}", SenderID, SenderPassword, TransactionId)); } catch (System.Exception ex) { throw ex; } } /// <summary> /// returns the Sender ID to be used when communicating with the GovTalk Service /// </summary> public String SenderID { get; set; } /// <summary> /// return the password to be used when communicating with the GovTalk Service /// </summary> public String SenderPassword { get; set; } // end SenderPassword /// <summary> /// Transaction Id - uses the Time and Date converted to Ticks /// </summary> public String TransactionId { get; set; } // end TransactionId /// <summary> /// calculate the authentication value that will be used when /// communicating with /// </summary> public String AuthenticationValue { get; set; } // end AuthenticationValue property /// <summary> /// encodes password(s) using MD5 /// </summary> /// <param name="clearPassword"></param> /// <returns></returns> public static String EncodePassword(String clearPassword) { MD5CryptoServiceProvider md5Hasher = new MD5CryptoServiceProvider(); byte[] hashedBytes; UTF32Encoding encoder = new UTF32Encoding(); hashedBytes = md5Hasher.ComputeHash(ASCIIEncoding.Default.GetBytes(clearPassword)); String result = Regex.Replace(BitConverter.ToString(hashedBytes), "-", "").ToLower(); return result; } } } There is nothing particularly clever here, except for the EncodePassword method which hashes the value made up of the SenderId, Password and Transaction id. Each message inherits from this object. So for the Company Number Search in addition to the properties above we need a partial number, which dataset to search – for the purposes of the project we only need to search the LIVE set so this can be set in the constructor and the SearchRows. Again all are set as properties. With the SearchRows and DataSet initialized in the constructor. public class CompanyNumberSearchRequest : GovTalkRequest, IDisposable { /// <summary> /// /// </summary> public CompanyNumberSearchRequest() : base() { DataSet = "LIVE"; SearchRows = 1; } /// <summary> /// Company Number to search against /// </summary> public String PartialCompanyNumber { get; set; } /// <summary> /// What DataSet should be searched for the company /// </summary> public String DataSet { get; set; } /// <summary> /// How many rows should be returned /// </summary> public int SearchRows { get; set; } public void Dispose() { DataSet = String.Empty; PartialCompanyNumber = String.Empty; DataSet = "LIVE"; SearchRows = 1; } } As well as inheriting from our base class, I have also inherited from IDisposable – not just because it is just plain good practice to dispose of objects when coding, but it gives also gives us more versatility when using the object. There are four stages in making a request and this is reflected in the four methods we execute in making a call to the Companies House service; Create a request Send a request Check the status If OK then get the results of the request I’ve implemented each of these stages within a static class called Toolbox – which also means I don’t need to create an instance of the class to use it. When making a request there are three stages; Get the template for the message Serialize the object representing the message Transform the serialized object using a predefined XSLT file. Each of my templates I have defined as an embedded resource. When retrieving a resource of this kind we have to include the full namespace to the resource. In making the code re-usable as much as possible I defined the full ‘path’ within the GetRequest method. requestFile = String.Format("CompanyHub.Services.Schemas.{0}", RequestFile); So we now have the full path of the file within the assembly. Now all we need do is retrieve the assembly and get the resource. asm = Assembly.GetExecutingAssembly(); sr = asm.GetManifestResourceStream(requestFile); Once retrieved So this can be returned to the calling function and we now have a stream of XSLT to define the message. Time now to serialize the request to create the other side of this message. // Serialize object containing Request, Load into XML Document t = Obj.GetType(); ms = new MemoryStream(); serializer = new XmlSerializer(t); xmlTextWriter = new XmlTextWriter(ms, Encoding.ASCII); serializer.Serialize(xmlTextWriter, Obj); ms = (MemoryStream)xmlTextWriter.BaseStream; GovTalkRequest = Toolbox.ConvertByteArrayToString(ms.ToArray()); First off we need the type of the object so we make a call to the GetType method of the object containing the Message properties. Next we need a MemoryStream, XmlSerializer and an XMLTextWriter so these can be initialized. The object is serialized by making the call to the Serialize method of the serializer object. The result of that is then converted into a MemoryStream. That MemoryStream is then converted into a string. ConvertByteArrayToString This is a fairly simple function which uses an ASCIIEncoding object found within the System.Text namespace to convert an array of bytes into a string. public static String ConvertByteArrayToString(byte[] bytes) { System.Text.ASCIIEncoding enc = new System.Text.ASCIIEncoding(); return enc.GetString(bytes); } I only put it into a function because I will be using this in various places. The Sauce When adding support for other messages outside of creating a new object to store the properties of the message, the C# components do not need to change. It is in the XSLT file that the versatility of the technique lies. The XSLT file determines the format of the message. For the CompanyNumberSearch the XSLT file is as follows; <?xml version="1.0"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:template match="/"> <GovTalkMessage xsi:schemaLocation="http://www.govtalk.gov.uk/CM/envelope http://xmlgw.companieshouse.gov.uk/v1-0/schema/Egov_ch-v2-0.xsd" xmlns="http://www.govtalk.gov.uk/CM/envelope" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" > <EnvelopeVersion>1.0</EnvelopeVersion> <Header> <MessageDetails> <Class>NumberSearch</Class> <Qualifier>request</Qualifier> <TransactionID> <xsl:value-of select="CompanyNumberSearchRequest/TransactionId"/> </TransactionID> </MessageDetails> <SenderDetails> <IDAuthentication> <SenderID><xsl:value-of select="CompanyNumberSearchRequest/SenderID"/></SenderID> <Authentication> <Method>CHMD5</Method> <Value> <xsl:value-of select="CompanyNumberSearchRequest/AuthenticationValue"/> </Value> </Authentication> </IDAuthentication> </SenderDetails> </Header> <GovTalkDetails> <Keys/> </GovTalkDetails> <Body> <NumberSearchRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlgw.companieshouse.gov.uk/v1-0/schema/NumberSearch.xsd"> <PartialCompanyNumber> <xsl:value-of select="CompanyNumberSearchRequest/PartialCompanyNumber"/> </PartialCompanyNumber> <DataSet> <xsl:value-of select="CompanyNumberSearchRequest/DataSet"/> </DataSet> <SearchRows> <xsl:value-of select="CompanyNumberSearchRequest/SearchRows"/> </SearchRows> </NumberSearchRequest> </Body> </GovTalkMessage> </xsl:template> </xsl:stylesheet> The outer two tags define that this is a XSLT stylesheet and the root tag from which the nodes are searched for. The GovTalkMessage is the format of the message that will be sent to Companies House. We first set up the XslCompiledTransform object which will transform the XSLT template and the serialized object into the request to Companies House. xslt = new XslCompiledTransform(); resultStream = new MemoryStream(); writer = new XmlTextWriter(resultStream, Encoding.ASCII); doc = new XmlDocument(); The Serialize method require XmlTextWriter to write the XML (writer) and a stream to place the transferred object into (writer). The XML will be loaded into an XMLDocument object (doc) prior to the transformation. // create XSLT Template xslTemplate = Toolbox.GetRequest(Template); xslTemplate.Seek(0, SeekOrigin.Begin); templateReader = XmlReader.Create(xslTemplate); xslt.Load(templateReader); I have stored all the templates as a series of Embedded Resources and the GetRequestCall takes the name of the template and extracts the relevent XSLT file. /// <summary> /// Gets the framwork XML which makes the request /// </summary> /// <param name="RequestFile"></param> /// <returns></returns> public static Stream GetRequest(String RequestFile) { String requestFile = String.Empty; Stream sr = null; Assembly asm = null; try { requestFile = String.Format("CompanyHub.Services.Schemas.{0}", RequestFile); asm = Assembly.GetExecutingAssembly(); sr = asm.GetManifestResourceStream(requestFile); } catch (Exception) { throw; } finally { asm = null; } return sr; } // end private static stream GetRequest We first take the template name and expand it to include the full namespace to the Embedded Resource I like to keep all my schemas in the same directory and so the namespace reflects this. The rest is the default namespace for the project. Then we get the currently executing assembly (which will contain the resources with the call to GetExecutingAssembly() ) Finally we get a stream which contains the XSLT file. We use this stream and then load an XmlReader with the contents of the template, and that is in turn loaded into the XslCompiledTransform object. We convert the object containing the message properties into Xml by serializing it; calling the Serialize() method of the XmlSerializer object. To set up the object we do the following; t = Obj.GetType(); ms = new MemoryStream(); serializer = new XmlSerializer(t); xmlTextWriter = new XmlTextWriter(ms, Encoding.ASCII); We first determine the type of the object being transferred by calling GetType() We create an XmlSerializer object by passing the type of the object being serialized. The serializer writes to a memory stream and that is linked to an XmlTextWriter. Next job is to serialize the object and load it into an XmlDocument. serializer.Serialize(xmlTextWriter, Obj); ms = (MemoryStream)xmlTextWriter.BaseStream; xmlRequest = new XmlTextReader(ms); GovTalkRequest = Toolbox.ConvertByteArrayToString(ms.ToArray()); doc.LoadXml(GovTalkRequest); Time to transform the XML to construct the full request. xslt.Transform(doc, writer); resultStream.Seek(0, SeekOrigin.Begin); request = Toolbox.ConvertByteArrayToString(resultStream.ToArray()); So that creates the full request to be sent to Companies House. Sending the request So far we have a string with a request for the Companies House service. Now we need to send the request to the Companies House Service. Configuration within an Azure project There are entire blog entries written about configuration within an Azure project – most of this is out of scope for this article but the following is a summary. Configuration is defined in two files within the parent project *.csdef which contains the definition of configuration setting. <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="OnlineCompanyHub" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WebRole name="CompanyHub.Host"> <InputEndpoints> <InputEndpoint name="HttpIn" protocol="http" port="80" /> </InputEndpoints> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" /> <Setting name="DataConnectionString" /> </ConfigurationSettings> </WebRole> <WebRole name="CompanyHub.Services"> <InputEndpoints> <InputEndpoint name="HttpIn" protocol="http" port="8080" /> </InputEndpoints> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" /> <Setting name="SenderId"/> <Setting name="SenderPassword" /> <Setting name="GovTalkUrl"/> </ConfigurationSettings> </WebRole> <WorkerRole name="CompanyHub.Worker"> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" /> </ConfigurationSettings> </WorkerRole> </ServiceDefinition> Above is the configuration definition from the project. What we are interested in however is the ConfigurationSettings tag of the CompanyHub.Services WebRole. There are four configuration settings here, but at the moment we are interested in the second to forth settings; SenderId, SenderPassword and GovTalkUrl The value of these settings are defined in the ServiceDefinition.cscfg file; <?xml version="1.0"?> <ServiceConfiguration serviceName="OnlineCompanyHub" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration"> <Role name="CompanyHub.Host"> <Instances count="2" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="DataConnectionString" value="UseDevelopmentStorage=true" /> </ConfigurationSettings> </Role> <Role name="CompanyHub.Services"> <Instances count="2" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="SenderId" value="UserID"/> <Setting name="SenderPassword" value="Password"/> <Setting name="GovTalkUrl" value="http://xmlgw.companieshouse.gov.uk/v1-0/xmlgw/Gateway"/> </ConfigurationSettings> </Role> <Role name="CompanyHub.Worker"> <Instances count="2" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" /> </ConfigurationSettings> </Role> </ServiceConfiguration> Look for the Role tag that contains our project name (CompanyHub.Services). Having configured the parameters we can now transmit the request. This is done by ‘POST’ing a stream of XML to the Companies House servers. govTalkUrl = RoleEnvironment.GetConfigurationSettingValue("GovTalkUrl"); request = WebRequest.Create(govTalkUrl); request.Method = "POST"; request.ContentType = "text/xml"; writer = new StreamWriter(request.GetRequestStream()); writer.WriteLine(RequestMessage); writer.Close(); We use the WebRequest object to send the object. Set the method of sending to ‘POST’ and the type of data as text/xml. Once set up all we do is write the request to the writer – this sends the request to Companies House. Did the Request Work Part I – Getting the response Having sent a request – we now need the result of that request. response = request.GetResponse(); reader = response.GetResponseStream(); result = Toolbox.ConvertByteArrayToString(Toolbox.ReadFully(reader)); The WebRequest object has a GetResponse() method which allows us to get the response sent back. Like many of these calls the results come in the form of a stream which we convert into a string. Did the Request Work Part II – Translating the Response Much like XSLT and XML were used to create the original request, so it can be used to extract the response and by deserializing the result we create an object that contains the response. Did it work? It would be really great if everything worked all the time. Of course if it did then I don’t suppose people would pay me and others the big bucks so that our programmes do not a) Collapse in a heap (this is an area of memory) b) Blow every fuse in the place in a shower of sparks (this will probably not happen this being real life and not a Hollywood movie, but it was possible to blow the sound system of a BBC Model B with a poorly coded setting) c) Go nuts and trap everyone outside the airlock (this was from a movie, and unless NASA get a manned moon/mars mission set up unlikely to happen) d) Go nuts and take over the world (this was also from a movie, but please note life has a habit of being of exceeding the wildest imaginations of Hollywood writers (note writers – Hollywood executives have no imagination and judging by recent output of that town have turned plagiarism into an art form). e) Freeze in total confusion because the cleaner pulled the plug to the internet router (this has happened) So anyway – we need to check to see if our request actually worked. Within the GovTalk response there is a section that details the status of the message and a description of what went wrong (if anything did). I have defined an XSLT template which will extract these into an XML document. <?xml version="1.0"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ev="http://www.govtalk.gov.uk/CM/envelope" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <xsl:template match="/"> <GovTalkStatus xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Status> <xsl:value-of select="ev:GovTalkMessage/ev:Header/ev:MessageDetails/ev:Qualifier"/> </Status> <Text> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Text"/> </Text> <Location> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Location"/> </Location> <Number> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Number"/> </Number> <Type> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Type"/> </Type> </GovTalkStatus> </xsl:template> </xsl:stylesheet> Only thing different about previous XSL files is the references to two namespaces ev & gt. These are defined in the GovTalk response at the top of the response; xsi:schemaLocation="http://www.govtalk.gov.uk/CM/envelope http://xmlgw.companieshouse.gov.uk/v1-0/schema/Egov_ch-v2-0.xsd" xmlns="http://www.govtalk.gov.uk/CM/envelope" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" If we do not put these references into the XSLT template then the XslCompiledTransform object will not be able to find the relevant tags. Deserialization is a fairly simple activity. encoder = new ASCIIEncoding(); ms = new MemoryStream(encoder.GetBytes(statusXML)); serializer = new XmlSerializer(typeof(GovTalkStatus)); xmlTextWriter = new XmlTextWriter(ms, Encoding.ASCII); messageStatus = (GovTalkStatus)serializer.Deserialize(ms); We set up a serialization object using the object type containing the error state and pass to it the results of a transformation between the XSLT above and the GovTalk response. Now we have an object containing any error state, and the error message. All we need to do is check the status. If there is an error then we can flag an error. If not then we extract the results and pass that as an object back to the calling function. We go this by guess what – defining an XSLT template for the result and using that to create an Xml Stream which can be deserialized into a .Net object. In this instance the XSLT to create the result of a Company Number Search is; <?xml version="1.0" encoding="us-ascii"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ev="http://www.govtalk.gov.uk/CM/envelope" xmlns:sch="http://xmlgw.companieshouse.gov.uk/v1-0/schema" exclude-result-prefixes="ev"> <xsl:template match="/"> <CompanySearchResult xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <CompanyNumber> <xsl:value-of select="ev:GovTalkMessage/ev:Body/sch:NumberSearch/sch:CoSearchItem/sch:CompanyNumber"/> </CompanyNumber> <CompanyName> <xsl:value-of select="ev:GovTalkMessage/ev:Body/sch:NumberSearch/sch:CoSearchItem/sch:CompanyName"/> </CompanyName> </CompanySearchResult> </xsl:template> </xsl:stylesheet> and the object definition is; using System; using System.Collections.Generic; using System.Linq; using System.Web; namespace CompanyHub.Services { public class CompanySearchResult { public CompanySearchResult() { CompanyNumber = String.Empty; CompanyName = String.Empty; } public String CompanyNumber { get; set; } public String CompanyName { get; set; } } } Our entire code to make calls to send a request, and interpret the results are; String request = String.Empty; String response = String.Empty; GovTalkStatus status = null; fault = null; try { using (CompanyNumberSearchRequest requestObj = new CompanyNumberSearchRequest()) { requestObj.PartialCompanyNumber = CompanyNumber; request = Toolbox.CreateRequest(requestObj, "CompanyNumberSearch.xsl"); response = Toolbox.SendGovTalkRequest(request); status = Toolbox.GetMessageStatus(response); if (status.Status.ToLower() == "error") { fault = new HubFault() { Message = status.Text }; } else { Object obj = Toolbox.GetGovTalkResponse(response, "CompanyNumberSearchResult.xsl", typeof(CompanySearchResult)); } } } catch (FaultException<ArgumentException> ex) { fault = new HubFault() { FaultType = ex.Detail.GetType().FullName, Message = ex.Detail.Message }; } catch (System.Exception ex) { fault = new HubFault() { FaultType = ex.GetType().FullName, Message = ex.Message }; } finally { } Wrap up So there we have it – a reusable set of functions to send and interpret XML results from an internet based service. The code is reusable with a little change with any service which uses XML as a transport mechanism – and as for the Companies House GovTalk service all I need to do is create various objects for the result and message sent and the relevent XSLT files. I might need minor changes for other services but something like 70-90% will be exactly the same.

Read the article

"domain crashed" when creating new Xen instance

- by user47650

I have downloaded a Xen virtual machine image from the appscale project, and I am trying to start it up. However once I run the command; xm create -c -f xen.conf The instance immediately crashes and provides no console output. however it produces logs that I have posted below. but this is the error; [2011-03-01 12:34:03 xend.XendDomainInfo 3580] WARNING (XendDomainInfo:1178) Domain has crashed: name=appscale-1.4b id=10. I have managed to mount the root.img file locally and verify that it is actually an ext3 file system. I am running Xen 3.0.3 that is a stock RPM from the CentOS 5 repos; # rpm -qa | grep -i xen xen-libs-3.0.3-105.el5_5.5 xen-3.0.3-105.el5_5.5 xen-libs-3.0.3-105.el5_5.5 kernel-xen-2.6.18-194.32.1.el5 any suggestions on how to proceed with troubleshooting? (i am a newbie to Xen) so far I have enabled console logging, but the log file is empty. ==> domain-builder-ng.log <== xc_dom_allocate: cmdline=" ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console", features="" xc_dom_kernel_file: filename="/boot/vmlinuz-2.6.27-7-server" xc_dom_malloc_filemap : 2284 kB xc_dom_ramdisk_file: filename="/boot/initrd.img-2.6.27-7-server" xc_dom_malloc_filemap : 9005 kB xc_dom_boot_xen_init: ver 3.1, caps xen-3.0-x86_64 xen-3.0-x86_32p xc_dom_parse_image: called xc_dom_find_loader: trying ELF-generic loader ... failed xc_dom_find_loader: trying Linux bzImage loader ... xc_dom_malloc : 9875 kB xc_dom_do_gunzip: unzip ok, 0x234bb2 -> 0x9a4de0 OK elf_parse_binary: phdr: paddr=0x200000 memsz=0x447000 elf_parse_binary: phdr: paddr=0x647000 memsz=0xab888 elf_parse_binary: phdr: paddr=0x6f3000 memsz=0x908 elf_parse_binary: phdr: paddr=0x6f4000 memsz=0x1c2f9c elf_parse_binary: memory: 0x200000 -> 0x8b6f9c elf_xen_parse_note: GUEST_OS = "linux" elf_xen_parse_note: GUEST_VERSION = "2.6" elf_xen_parse_note: XEN_VERSION = "xen-3.0" elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 elf_xen_parse_note: ENTRY = 0xffffffff8071e200 elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80209000 elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" elf_xen_parse_note: PAE_MODE = "yes" elf_xen_parse_note: LOADER = "generic" elf_xen_parse_note: unknown xen elf note (0xd) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 elf_xen_parse_note: PADDR_OFFSET = 0x0 elf_xen_addr_calc_check: addresses: virt_base = 0xffffffff80000000 elf_paddr_offset = 0x0 virt_offset = 0xffffffff80000000 virt_kstart = 0xffffffff80200000 virt_kend = 0xffffffff808b6f9c virt_entry = 0xffffffff8071e200 xc_dom_parse_elf_kernel: xen-3.0-x86_64: 0xffffffff80200000 -> 0xffffffff808b6f9c xc_dom_mem_init: mem 1024 MB, pages 0x40000 pages, 4k each xc_dom_mem_init: 0x40000 pages xc_dom_boot_mem_init: called x86_compat: guest xen-3.0-x86_64, address size 64 xc_dom_malloc : 2048 kB ==> xend.log <== [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2114) UUID Created: True [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2115) Devices to release: [], domid = 9 [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2127) Releasing PVFB backend devices ... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:207) XendDomainInfo.create(['domain', ['domid', 9], ['uuid', 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0'], ['vcpus', 1], ['vcpu_avail', 1], ['cpu_cap', 0], ['cpu_weight', 256], ['memory', 1024], ['shadow_memory', 0], ['maxmem', 1024], ['features', ''], ['name', 'appscale-1.4b'], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['image', ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']]], ['cpus', []], ['device', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]], ['device', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']]], ['state', '----c-'], ['shutdown_reason', 'crash'], ['cpu_time', 0.000339131], ['online_vcpus', 1], ['up_time', '0.952092885971'], ['start_time', '1299011639.92'], ['store_mfn', 1169289], ['console_mfn', 1169288]]) [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:329) parseConfig: config is ['domain', ['domid', 9], ['uuid', 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0'], ['vcpus', 1], ['vcpu_avail', 1], ['cpu_cap', 0], ['cpu_weight', 256], ['memory', 1024], ['shadow_memory', 0], ['maxmem', 1024], ['features', ''], ['name', 'appscale-1.4b'], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['image', ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']]], ['cpus', []], ['device', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]], ['device', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']]], ['state', '----c-'], ['shutdown_reason', 'crash'], ['cpu_time', 0.000339131], ['online_vcpus', 1], ['up_time', '0.952092885971'], ['start_time', '1299011639.92'], ['store_mfn', 1169289], ['console_mfn', 1169288]] [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:446) parseConfig: result is {'features': '', 'image': ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']], 'cpus': [], 'vcpu_avail': 1, 'backend': [], 'uuid': 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'on_reboot': 'restart', 'cpu_weight': 256.0, 'memory': 1024, 'cpu_cap': 0, 'localtime': None, 'timer_mode': None, 'start_time': 1299011639.9200001, 'on_poweroff': 'destroy', 'on_crash': 'restart', 'device': [('vif', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]), ('vbd', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']])], 'bootloader': None, 'maxmem': 1024, 'shadow_memory': 0, 'name': 'appscale-1.4b', 'bootloader_args': None, 'vcpus': 1, 'cpu': None} [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1784) XendDomainInfo.construct: None [2011-03-01 12:34:02 xend 3580] DEBUG (balloon:145) Balloon: 3034420 KiB free; need 4096; done. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1953) XendDomainInfo.initDomain: 10 256.0 [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1994) _initDomain:shadow_memory=0x0, maxmem=0x400, memory=0x400. [2011-03-01 12:34:02 xend 3580] DEBUG (balloon:145) Balloon: 3034412 KiB free; need 1048576; done. [2011-03-01 12:34:02 xend 3580] INFO (image:139) buildDomain os=linux dom=10 vcpus=1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:208) domid = 10 [2011-03-01 12:34:02 xend 3580] DEBUG (image:209) memsize = 1024 [2011-03-01 12:34:02 xend 3580] DEBUG (image:210) image = /boot/vmlinuz-2.6.27-7-server [2011-03-01 12:34:02 xend 3580] DEBUG (image:211) store_evtchn = 1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:212) console_evtchn = 2 [2011-03-01 12:34:02 xend 3580] DEBUG (image:213) cmdline = ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console [2011-03-01 12:34:02 xend 3580] DEBUG (image:214) ramdisk = /boot/initrd.img-2.6.27-7-server [2011-03-01 12:34:02 xend 3580] DEBUG (image:215) vcpus = 1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:216) features = ==> domain-builder-ng.log <== xc_dom_build_image: called xc_dom_alloc_segment: kernel : 0xffffffff80200000 -> 0xffffffff808b7000 (pfn 0x200 + 0x6b7 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x200+0x6b7 at 0x2aaaab5f6000 elf_load_binary: phdr 0 at 0x0x2aaaab5f6000 -> 0x0x2aaaaba3d000 elf_load_binary: phdr 1 at 0x0x2aaaaba3d000 -> 0x0x2aaaabae8888 elf_load_binary: phdr 2 at 0x0x2aaaabae9000 -> 0x0x2aaaabae9908 elf_load_binary: phdr 3 at 0x0x2aaaabaea000 -> 0x0x2aaaabb9a004 xc_dom_alloc_segment: ramdisk : 0xffffffff808b7000 -> 0xffffffff82382000 (pfn 0x8b7 + 0x1acb pages) xc_dom_malloc : 160 kB xc_dom_pfn_to_ptr: domU mapping: pfn 0x8b7+0x1acb at 0x2aaab0000000 xc_dom_do_gunzip: unzip ok, 0x8cb5e7 -> 0x1aca210 xc_dom_alloc_segment: phys2mach : 0xffffffff82382000 -> 0xffffffff82582000 (pfn 0x2382 + 0x200 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x2382+0x200 at 0x2aaab1acb000 xc_dom_alloc_page : start info : 0xffffffff82582000 (pfn 0x2582) xc_dom_alloc_page : xenstore : 0xffffffff82583000 (pfn 0x2583) xc_dom_alloc_page : console : 0xffffffff82584000 (pfn 0x2584) nr_page_tables: 0x0000ffffffffffff/48: 0xffff000000000000 -> 0xffffffffffffffff, 1 table(s) nr_page_tables: 0x0000007fffffffff/39: 0xffffff8000000000 -> 0xffffffffffffffff, 1 table(s) nr_page_tables: 0x000000003fffffff/30: 0xffffffff80000000 -> 0xffffffffbfffffff, 1 table(s) nr_page_tables: 0x00000000001fffff/21: 0xffffffff80000000 -> 0xffffffff827fffff, 20 table(s) xc_dom_alloc_segment: page tables : 0xffffffff82585000 -> 0xffffffff8259c000 (pfn 0x2585 + 0x17 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x2585+0x17 at 0x2aaab1ccb000 xc_dom_alloc_page : boot stack : 0xffffffff8259c000 (pfn 0x259c) xc_dom_build_image : virt_alloc_end : 0xffffffff8259d000 xc_dom_build_image : virt_pgtab_end : 0xffffffff82800000 xc_dom_boot_image: called arch_setup_bootearly: doing nothing xc_dom_compat_check: supported guest type: xen-3.0-x86_64 <= matches xc_dom_compat_check: supported guest type: xen-3.0-x86_32p xc_dom_update_guest_p2m: dst 64bit, pages 0x40000 clear_page: pfn 0x2584, mfn 0x11d788 clear_page: pfn 0x2583, mfn 0x11d789 xc_dom_pfn_to_ptr: domU mapping: pfn 0x2582+0x1 at 0x2aaab1ce2000 start_info_x86_64: called setup_hypercall_page: vaddr=0xffffffff80209000 pfn=0x209 domain builder memory footprint allocated malloc : 12139 kB anon mmap : 0 bytes mapped file mmap : 11289 kB domU mmap : 35 MB arch_setup_bootlate: shared_info: pfn 0x0, mfn 0xd6fe1 shared_info_x86_64: called vcpu_x86_64: called vcpu_x86_64: cr3: pfn 0x2585 mfn 0x11d787 launch_vm: called, ctxt=0x97b21f8 xc_dom_release: called ==> xend.log <== [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:114) DevController: writing {'mac': '00:16:3B:72:10:E4', 'handle': '0', 'protocol': 'x86_64-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vif/10/0'} to /local/domain/10/device/vif/0. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:116) DevController: writing {'domain': 'appscale-1.4b', 'handle': '0', 'script': '/etc/xen/scripts/vif-bridge', 'state': '1', 'frontend': '/local/domain/10/device/vif/0', 'mac': '00:16:3B:72:10:E4', 'online': '1', 'frontend-id': '10'} to /local/domain/0/backend/vif/10/0. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:634) Checking for duplicate for uname: /local/xen/domains/appscale1.4/root.img [file:/local/xen/domains/appscale1.4/root.img], dev: sda1:disk, mode: w [2011-03-01 12:34:02 xend 3580] DEBUG (blkif:27) exception looking up device number for sda1:disk: [Errno 2] No such file or directory: '/dev/sda1:disk' [2011-03-01 12:34:02 xend 3580] DEBUG (blkif:27) exception looking up device number for sda1: [Errno 2] No such file or directory: '/dev/sda1' [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:114) DevController: writing {'virtual-device': '2049', 'device-type': 'disk', 'protocol': 'x86_64-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vbd/10/2049'} to /local/domain/10/device/vbd/2049. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:116) DevController: writing {'domain': 'appscale-1.4b', 'frontend': '/local/domain/10/device/vbd/2049', 'format': 'raw', 'dev': 'sda1', 'state': '1', 'params': '/local/xen/domains/appscale1.4/root.img', 'mode': 'w', 'online': '1', 'frontend-id': '10', 'type': 'file'} to /local/domain/0/backend/vbd/10/2049. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:993) Storing VM details: {'shadow_memory': '0', 'uuid': 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'on_reboot': 'restart', 'start_time': '1299011642.74', 'on_poweroff': 'destroy', 'name': 'appscale-1.4b', 'xend/restart_count': '0', 'vcpus': '1', 'vcpu_avail': '1', 'memory': '1024', 'on_crash': 'restart', 'image': "(linux (kernel /boot/vmlinuz-2.6.27-7-server) (ramdisk /boot/initrd.img-2.6.27-7-server) (ip :1.2.3.4::::eth0:dhcp) (root '/dev/sda1 ro') (args 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console'))", 'maxmem': '1024'} [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1028) Storing domain details: {'console/ring-ref': '1169288', 'console/port': '2', 'name': 'appscale-1.4b', 'console/limit': '1048576', 'vm': '/vm/d5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'domid': '10', 'cpu/0/availability': 'online', 'memory/target': '1048576', 'store/ring-ref': '1169289', 'store/port': '1'} [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:158) Waiting for devices vif. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:164) Waiting for 0. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1250) XendDomainInfo.handleShutdownWatch [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vif/10/0/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vif/10/0/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:523) hotplugStatusCallback 1. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices usb. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vbd. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:164) Waiting for 2049. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vbd/10/2049/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vbd/10/2049/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:523) hotplugStatusCallback 1. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices irq. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vkbd. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vfb. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices pci. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices ioports. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices tap. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vtpm. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] WARNING (XendDomainInfo:1178) Domain has crashed: name=appscale-1.4b id=10. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] ERROR (XendDomainInfo:2654) VM appscale-1.4b restarting too fast (2.275545 seconds since the last restart). Refusing to restart to avoid loops. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2189) XendDomainInfo.destroy: domid=10 ==> xen-hotplug.log <== Nothing to flush. ==> xend.log <== [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2114) UUID Created: True [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2115) Devices to release: [], domid = 10 [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2127) Releasing PVFB backend devices ... And this is the xen.conf file that I am using; # cat xen.conf # Configuration file for the Xen instance AppScale, created # bn VMBuilder kernel = '/boot/vmlinuz-2.6.27-7-server' ramdisk = '/boot/initrd.img-2.6.27-7-server' memory = 1024 vcpus = 1 root = '/dev/sda1 ro' disk = [ 'file:/local/xen/domains/appscale1.4/root.img,sda1,w', ] name = 'appscale-1.4b' dhcp = 'dhcp' vif = [ 'mac=00:16:3B:72:10:E4' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' extra = 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console'

Read the article

apache fails to connect to tomcat (Worker config?)

- by techventure

I have a tomcat 6 with follwoing server.xml: <Connector port="8253" maxThreads="150" minSpareThreads="25" maxSpareThreads="75" enableLookups="false" redirectPort="8445" acceptCount="100" debug="0" connectionTimeout="20000" disableUploadTimeout="true" /> <Connector port="8014" protocol="AJP/1.3" redirectPort="8445" /> and in added worker.properties: # Set properties for worker4 (ajp13) worker.worker4.type=ajp13 worker.worker4.host=localhost worker.worker4.port=8014 and i put in httpd.conf: JkMount /myWebApp/* worker4 It is not working a as trying to navigate to www1.myCompany.com/myWebApp gives "Service Temporarily Unavailable". I checked in tomcat catalina.out and it says: INFO: JK: ajp13 listening on /0.0.0.0:8014 UPDATE: i put mod_jk log level to debug and below is the result: [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_set_time_fmt::jk_util.c (458): Pre-processed log time stamp format is '[%a %b %d %H:%M:%S %Y] ' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_open::jk_uri_worker_map.c (770): rule map size is 8 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_add::jk_uri_worker_map.c (720): wildchar rule '/myWebApp/*=worker4' source 'JkMount' was added [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (171): uri map dump after map open: index=0 file='(null)' reject_unsafe=0 reload=60 modified=0 checked=0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 0: size=0 nosize=0 capacity=0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 1: size=8 nosize=0 capacity=8 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (186): NEXT (1) map #3: uri=/myWebApp/* worker=worker4 context=/myWebApp/* source=JkMount type=Wildchar len=6 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_set_time_fmt::jk_util.c (458): Pre-processed log time stamp format is '[%a %b %d %H:%M:%S %Y] ' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] init_jk::mod_jk.c (3123): Setting default connection pool max size to 1 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.list' with value 'worker1,worker2,worker3,worker4' to map. [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.worker4.type' with value 'ajp13' to map. [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.worker4.host' with value 'localhost' to map. [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.worker4.port' with value '8014' to map. [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_resolve_references::jk_map.c (774): Checking for references with prefix worker. with wildcard (recursion 1) [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_shm_calculate_size::jk_shm.c (132): shared memory will contain 4 ajp workers of size 256 and 0 lb workers of size 320 with 0 members of size 320+256 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [error] init_jk::mod_jk.c (3166): Initializing shm:/var/log/httpd/mod_jk.shm.9552 errno=13. Load balancing workers will not function properly. [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'ServerRoot' -> '/etc/httpd' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.list' -> 'worker1,worker2,worker3,worker4' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker1.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker1.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker1.port' -> '8009' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker2.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker2.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker2.port' -> '8010' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker3.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker3.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker3.port' -> '8112' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker4.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker4.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker4.port' -> '8014' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] build_worker_map::jk_worker.c (242): creating worker worker4 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] wc_create_worker::jk_worker.c (146): about to create instance worker4 of ajp13 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] wc_create_worker::jk_worker.c (159): about to validate and init worker4 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_validate::jk_ajp_common.c (2512): worker worker4 contact is 'localhost:8014' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2699): setting endpoint options: [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2702): keepalive: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2706): socket timeout: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2710): socket connect timeout: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2714): buffer size: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2718): pool timeout: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2722): ping timeout: 10000 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2726): connect timeout: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2730): reply timeout: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2734): prepost timeout: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2738): recovery options: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2742): retries: 2 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2746): max packet size: 8192 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2750): retry interval: 100 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_create_endpoint_cache::jk_ajp_common.c (2562): setting connection pool size to 1 with min 1 and acquire timeout 200 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] wc_get_worker_for_name::jk_worker.c (116): found a worker worker4 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] wc_get_name_for_type::jk_worker.c (293): Found worker type 'ajp13' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_ext::jk_uri_worker_map.c (512): Checking extension for worker 3: worker4 of type ajp13 (2) [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (171): uri map dump after extension stripping: index=0 file='(null)' reject_unsafe=0 reload=60 modified=0 checked=0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 0: size=0 nosize=0 capacity=0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 1: size=8 nosize=0 capacity=8 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (186): NEXT (1) map #3: uri=/myWebApp/* worker=worker4 context=/myWebApp/* source=JkMount type=Wildchar len=6 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_switch::jk_uri_worker_map.c (482): Switching uri worker map from index 0 to index 1 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_set_time_fmt::jk_util.c (458): Pre-processed log time stamp format is '[%a %b %d %H:%M:%S %Y] ' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_open::jk_uri_worker_map.c (770): rule map size is 8 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_add::jk_uri_worker_map.c (720): wildchar rule '/myWebApp/*=worker4' source 'JkMount' was added [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (171): uri map dump after map open: index=0 file='(null)' reject_unsafe=0 reload=60 modified=0 checked=0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 0: size=0 nosize=0 capacity=0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 1: size=8 nosize=0 capacity=8 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (186): NEXT (1) map #0: uri=/jsp-examples/* worker=worker1 context=/jsp-examples/* source=JkMount type=Wildchar len=15 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (186): NEXT (1) map #3: uri=/myWebApp/* worker=worker4 context=/myWebApp/* source=JkMount type=Wildchar len=6 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_set_time_fmt::jk_util.c (458): Pre-processed log time stamp format is '[%a %b %d %H:%M:%S %Y] ' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] init_jk::mod_jk.c (3123): Setting default connection pool max size to 1 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.list' with value 'worker1,worker2,worker3,worker4' to map. [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.worker4.type' with value 'ajp13' to map. [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.worker4.host' with value 'localhost' to map. [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.worker4.port' with value '8014' to map. [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_resolve_references::jk_map.c (774): Checking for references with prefix worker. with wildcard (recursion 1) [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_shm_calculate_size::jk_shm.c (132): shared memory will contain 4 ajp workers of size 256 and 0 lb workers of size 320 with 0 members of size 320+256 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [error] init_jk::mod_jk.c (3166): Initializing shm:/var/log/httpd/mod_jk.shm.9553 errno=13. Load balancing workers will not function properly. [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'ServerRoot' -> '/etc/httpd' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.list' -> 'worker1,worker2,worker3,worker4' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker1.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker1.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker1.port' -> '8009' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker2.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker2.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker2.port' -> '8010' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker3.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker3.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker3.port' -> '8112' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker4.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker4.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker4.port' -> '8014' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] build_worker_map::jk_worker.c (242): creating worker worker4 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] wc_create_worker::jk_worker.c (146): about to create instance worker4 of ajp13 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] wc_create_worker::jk_worker.c (159): about to validate and init worker4 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_validate::jk_ajp_common.c (2512): worker worker4 contact is 'localhost:8014' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2699): setting endpoint options: [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2702): keepalive: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2706): socket timeout: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2710): socket connect timeout: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2714): buffer size: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2718): pool timeout: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2722): ping timeout: 10000 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2726): connect timeout: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2730): reply timeout: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2734): prepost timeout: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2738): recovery options: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2742): retries: 2 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2746): max packet size: 8192 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2750): retry interval: 100 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_create_endpoint_cache::jk_ajp_common.c (2562): setting connection pool size to 1 with min 1 and acquire timeout 200 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] wc_get_worker_for_name::jk_worker.c (116): found a worker worker4 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] wc_get_name_for_type::jk_worker.c (293): Found worker type 'ajp13' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_ext::jk_uri_worker_map.c (512): Checking extension for worker 3: worker4 of type ajp13 (2) [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (171): uri map dump after extension stripping: index=0 file='(null)' reject_unsafe=0 reload=60 modified=0 checked=0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 0: size=0 nosize=0 capacity=0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 1: size=8 nosize=0 capacity=8 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (186): NEXT (1) map #3: uri=/myWebApp/* worker=worker4 context=/myWebApp/* source=JkMount type=Wildchar len=6 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_switch::jk_uri_worker_map.c (482): Switching uri worker map from index 0 to index 1 [Wed Jun 13 18:44:26 2012] [9555:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9556:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9557:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9558:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9559:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9560:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9561:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9562:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9563:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9564:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9565:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9567:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9568:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9566:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9569:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9570:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] map_uri_to_worker_ext::jk_uri_worker_map.c (1036): Attempting to map URI '/myWebApp/jsp/login.faces' from 8 maps [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/myWebApp/*=worker4' source 'JkMount' [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] find_match::jk_uri_worker_map.c (863): Found a wildchar match '/myWebApp/*=worker4' [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] jk_handler::mod_jk.c (2459): Into handler jakarta-servlet worker=worker4 r->proxyreq=0 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] wc_get_worker_for_name::jk_worker.c (116): found a worker worker4 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] wc_maintain::jk_worker.c (339): Maintaining worker worker1 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] wc_maintain::jk_worker.c (339): Maintaining worker worker2 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] wc_maintain::jk_worker.c (339): Maintaining worker worker3 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] wc_maintain::jk_worker.c (339): Maintaining worker worker4 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] wc_get_name_for_type::jk_worker.c (293): Found worker type 'ajp13' [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] init_ws_service::mod_jk.c (977): Service protocol=HTTP/1.1 method=GET ssl=false host=(null) addr=167.184.214.6 name=www1.myCompany.com.au port=80 auth=(null) user=(null) laddr=10.215.222.78 raddr=167.184.214.6 uri=/myWebApp/jsp/login.faces [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_get_endpoint::jk_ajp_common.c (2977): acquired connection pool slot=0 after 0 retries [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_marshal_into_msgb::jk_ajp_common.c (605): ajp marshaling done [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_service::jk_ajp_common.c (2283): processing worker4 with 2 retries [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_send_request::jk_ajp_common.c (1501): (worker4) all endpoints are disconnected. [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] jk_open_socket::jk_connect.c (452): socket TCP_NODELAY set to On [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] jk_open_socket::jk_connect.c (576): trying to connect socket 18 to 127.0.0.1:8014 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8014 failed (errno=13) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8014) (errno=13) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [error] ajp_send_request::jk_ajp_common.c (1507): (worker4) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=13) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] ajp_service::jk_ajp_common.c (2447): (worker4) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_service::jk_ajp_common.c (2304): retry 1, sleeping for 100 ms before retrying [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_send_request::jk_ajp_common.c (1501): (worker4) all endpoints are disconnected. [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] jk_open_socket::jk_connect.c (452): socket TCP_NODELAY set to On [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] jk_open_socket::jk_connect.c (576): trying to connect socket 18 to 127.0.0.1:8014 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8014 failed (errno=13) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8014) (errno=13) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [error] ajp_send_request::jk_ajp_common.c (1507): (worker4) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=13) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] ajp_service::jk_ajp_common.c (2447): (worker4) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [error] ajp_service::jk_ajp_common.c (2466): (worker4) connecting to tomcat failed. [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_reset_endpoint::jk_ajp_common.c (743): (worker4) resetting endpoint with sd = 4294967295 (socket shutdown) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_done::jk_ajp_common.c (2905): recycling connection pool slot=0 for worker worker4 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] jk_handler::mod_jk.c (2615): Service error=-3 for worker=worker4 The error i get in browser is: Service Temporarily Unavailable Apache/2.2.3 (Red Hat) Server at www1.myCompany.com.au Port 80 can someone please help and explain what is going on and how it can be resolved?

Search Results

Search found 5845 results on 234 pages for 'commit protocol'.

Page 180/234 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187 | Next Page >

- by Gravy

- by chum of chance

- by ConcreteVitamin

- by adaptive

- by MLister

- by astrostl

- by Nevermind

- by miccet

- by Mojah

- by Kylie Z

- by jmccrohan

- by nextus

- by seanizer

- by Hoang Pham

- by Peterson

- by linuxdoniv

- by joshea

- by Quentin Swain

- by Miky Mike

- by linuxdoniv

- by skimania

- by The chicken in the kitchen

- by paulschapman

- by user47650

- by techventure

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187 | Next Page >