Search Results

Search found 7332 results on 294 pages for 'hooray im helping'.

Page 180/294 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

  • VirtualBox with Ubuntu Server guest can't ping outside

    - by Danidan
    Here's my situation: an Ubuntu 12.04 Host running VirtualBox; two guest VMs running Ubuntu Server 12.04 home network, so my Host pc has a wireless connection to the router of my ISP. My problem is in one of the virtual machines: it has 3 NICs, one in NAT mode and the others in Host Only mode. My purpose is to use eth0 (NAT) for Internet access and eth1, eth2 (Host Only) for management of internal virtual network (eth1 uses a VBoxNet with this IP 192.168.69.254). Whenever I try to $ping 8.8.8.8 I get Destination Host Unreachable. While if I $ping 192.168.69.10, that is the IP of the other VM, it works. I can't also ping my Host nor my router My /etc/network/interfaces file is: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 192.168.69.1 netmask 255.255.255.0 auto eth2 iface ifconfig $IFACE 0.0.0.0 up up ip link set $IFACE promisc on down ip link set $IFASE promisc off down ifconfig $IFACE down $route -n returns: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.69.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Forgetting for now what eth2 needs to do and its setup, why I can't go outside the Host box? What can I do to help you helping me? :-)

    Read the article

  • postfix cannot send email

    - by AKLP
    I'd like to mention that im really new to this so please bear with me. I'm trying to setup a forum software to send emails via postfix but I think my server has the port 25 blocked. I tried running these: works: ping alt2.gmail-smtp-in.l.google.com don't work: telnet alt2.gmail-smtp-in.l.google.com 25 telnet 66.249.93.114 25 tried flushing iptables and then using these rules but didn't work either: sudo iptables --flush sudo iptables -P INPUT ACCEPT sudo iptables -P OUTPUT ACCEPT sudo iptables -P FORWARD ACCEPT sudo iptables -F sudo iptables -X doing a telnet on 25 port to localhost url works but nothing when telnet'ing in none local urls. mail.log: Oct 17 01:20:24 webhost postfix/smtp[3642]: connect to alt2.gmail-smtp-in.l.google.com[2607:f8b0:400e:c03::1a]:25: Connection timed out Oct 17 01:20:24 webhost postfix/smtp[3643]: connect to alt2.gmail-smtp-in.l.google.com[2607:f8b0:400e:c03::1a]:25: Connection timed out Oct 17 01:20:24 webhost postfix/smtp[3642]: 4744380032: to=<[email protected]>, relay=none, delay=2892, delays=2741/0.03/150/0, dsn=4.4.1, status=deferred (connect to alt2.gmail-smtp-in.l.google.com[2607:f$

    Read the article

  • safari 5 doesnt work on my computer.

    - by Amairani409
    I just got the new version of safari y downloaded because my mac tell me there was new version that I should be getting. but when I try to run my this new version of the aplication .nothing happends¡ I mean the program seems to be working but nothing apears in the screen and so when I try to see my top sites a little window show up but it just dont show anything. then 3 seconds later the program shut down¡ I dont know why is happening this Im not so a expert in computers but this really is away of all I see on safari and on mac I got Mac OS X version 10.5.8 2.66ghz intel core 2 duo 4gb 1067 MHz DDR3

    Read the article

  • MySQL 5.0 Unavailable but still working every monday morning

    - by user1578031
    So I have a MySQL server with 4-5 databases and every monday morning, I can't login with PHPmyAdmin or the cmd line tools or options and the funny thing is the connection can be made later in the day around 3:30 - 4PM. I can't replicate the issues on any dev boxes and cant upgrade to 5.5 for a number of reasons. I want to try and poll the sql databases with a simple script and just connect to it and then disconnect. I'm not very good with SQL but would like to know if anyone could help with a script which I can automate to run sunday every 30mins or so, to see if the issue can be stopped by the database being connected to over the very quiet period of sunday... After this im out of ideas and have to wait for the HW/SW refresh to get 5.5 on there...

    Read the article

  • How to nmot show any prompts when inserting a USB drive in Windows?

    - by jasondavis
    1) I just found a really interesting program that allows me to use a USB drive as a windows login key. It is called Rohos Logon Key. IF I remobve my USB drive/key from the PC then I can have the PC lock or hibernate or any other option, I have been looking for such a solution for many years but never knew one existed until this and it works much better then I imagined. I do have a couple minor issues though (im using Windows 7 pro). When I remove and then re-insert my USB key, windows prompts me with this dialog here... Generally when I get this I just click on "Continue without scanning" however I am looking for a solution to just make it not even show this at all, is it possible to disable it from showing? 2) I also get this dialog as well when I insert USB drives/key... Would it be possible to not show this as well or have it pick an option by default or anything really?

    Read the article

  • asus 1215p cannot get the 1366 x 768 resolution

    - by Arthur
    Hi everyone, im a little bit stuck. I had a windows 7 starter installed on this netbook, it wasn't that great so I installed windows 7 ultimate. everything is OK apart from the screen resolution. it doesn't let me choose the optimal 1366x768 resolution and defaults to lower quality, in fact it doesn't even list it. I have tried drivers from Microsoft, Asus and Intel and still no joy. Any suggestions? It has the Intel 3150 Graphics Media Accelerator Much appreciated :)

    Read the article

  • Examples of applications where messages are pushed from a server and display on clients immediately

    - by James Hay
    I'm trying to find an example to show where data is sent from a server and is pushed to a/multiple clients which are updated immediately, i.e. the client doesn't make requests for updates. It doesn't matter whether we're talking mobile, desktop or whatever. An even better example would be where there were multiple recipients for the same message. It doesn't matter what the data is or the context it's used in, only the immediacy of receiving it. I was thinking that there might be some example in finance and the stock markets, but I haven't been able to find any through googling. IM clients are a great example of this and are on my list of one ;) If anyone works on applications of this nature or knows of particular implementations, can you give me a quick run down of the use case and if it's commercial software the name of the software. This is all basically for research purposes so doesn't have to be particularly detailed. If anyone can help, thanks.

    Read the article

  • When HDD wakes up?

    - by NumberFour
    Im looking for some small script or application which could log the time when a non-system disk wakes up. I cannot identify which application or script wakes up my non-system drive (which has to be asleep until I work with it). I have already set the noatime flag, tried to use powertop and iotop to determine which application could prevent it from going to sleep - but with no result. So my plan is to set this drive asleep (hdparm -Y) and see at what time it gets regularly woken up. Thanks for any advice.

    Read the article

  • java will this threading setup work or what can i be doing wrong

    - by Erik
    Im a bit unsure and have to get advice. I have the: public class MyApp extends JFrame{ And from there i do; MyServer = new MyServer (this); MyServer.execute(); MyServer is a: public class MyServer extends SwingWorker<String, Object> { MyServer is doing listen_socket.accept() in the doInBackground() and on connection it create a new class Connection implements Runnable { I have the belove DbHelper that are a singleton. It holds an Sqlite connected. Im initiating it in the above MyApp and passing references all the way in to my runnable: class Connection implements Runnable { My question is what will happen if there are two simultaneous read or `write? My thought here was the all methods in the singleton are synchronized and would put all calls in the queue waiting to get a lock on the synchronized method. Will this work or what can i change? public final class DbHelper { private boolean initalized = false; private String HomePath = ""; private File DBFile; private static final String SYSTEM_TABLE = "systemtable"; Connection con = null; private Statement stmt; private static final ContentProviderHelper instance = new ContentProviderHelper (); public static ContentProviderHelper getInstance() { return instance; } private DbHelper () { if (!initalized) { initDB(); initalized = true; } } private void initDB() { DBFile = locateDBFile(); try { Class.forName("org.sqlite.JDBC"); // create a database connection con = DriverManager.getConnection("jdbc:sqlite:J:/workspace/workComputer/user_ptpp"); } catch (SQLException e) { e.printStackTrace(); } catch (ClassNotFoundException e) { e.printStackTrace(); } } private File locateDBFile() { File f = null; try{ HomePath = System.getProperty("user.dir"); System.out.println("HomePath: " + HomePath); f = new File(HomePath + "/user_ptpp"); if (f.canRead()) return f; else { boolean success = f.createNewFile(); if (success) { System.out.println("File did not exist and was created " + HomePath); // File did not exist and was created } else { System.out.println("File already exists " + HomePath); // File already exists } } } catch (IOException e) { System.out.println("Maybe try a new directory. " + HomePath); //Maybe try a new directory. } return f; } public String getHomePath() { return HomePath; } private synchronized String getDate(){ SimpleDateFormat dateFormat = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss"); Date date = new Date(); return dateFormat.format(date); } public synchronized String getSelectedSystemTableColumn( String column) { String query = "select "+ column + " from " + SYSTEM_TABLE ; try { stmt = con.createStatement(ResultSet.TYPE_FORWARD_ONLY, ResultSet.CONCUR_READ_ONLY); ResultSet rs = stmt.executeQuery(query); while (rs.next()) { String value = rs.getString(column); if(value == null || value == "") return ""; else return value; } } catch (SQLException e ) { e.printStackTrace(); return ""; } finally { } return ""; } }

    Read the article

  • Trouble with apache starting on boot with ssl api key

    - by molleman
    Im Running on Centos, the trouble is when i restart my server i need to start my apache and varnish service I use this to start both of them service httpd restart && service varnish restart But i would likw both of them to start when i reboot the server I read i could use this chkconfig httpd on But this is only for apache could i do this chkconfig varnish on Finally when i do y usual start of httpd , i am asked for my api key for SSL , am i able to incorporate this into resarting both varnish and httpd on start up. Or am i doomed to run this command everytime i resart

    Read the article

  • Managing SharePoint permissions via Active Directory?

    - by rgmatthes
    My company has thousands of employees organized thoroughly via Active Directory. I have confidence in the accuracy of the Department and Title information displayed in the user profiles. I'm helping to put up a brand new SharePoint 2007 site, and I contacted IT about managing the site's permissions through AD Groups. The goal is to have the site automatically assign read/write/contribute/whatever permissions based on the information in AD. For example, we could create an AD Group called "Managers" that would contain anyone with the "Manager" title in their AD user profile. I would have SharePoint tap into this AD Group to mass assign permissions if I knew all managers would need a certain level of access (read/write/contribute/whatever). Then if a manager joins the company or leaves it, the group is automatically updated (provided AD gets updated, of course). My IT rep called back and said it couldn't be done. This seems like a pretty straightforward business requirement, and one of the huge benefits of having Active Directory, but maybe I'm mistaken. Could anyone shed some light on this? A) Is it possible to use dynamically-updated AD Groups when assigning permissions via SharePoint? (Does anyone know of a guide I could show my doubtful IT rep?) B) Is there a "best practice" way to go about this? I've read some debate on whether SharePoint Groups or AD Groups are the way to go. My main concern is dynamic updating. C) If this isn't available out of the box, can someone recommend third-party software that will provide the functionality I'm looking for? A big thanks to anyone who can help me out!!

    Read the article

  • Redirecting Subdomain with Volusion and GoDaddy

    - by ToddN
    I need to create a subdomain (reviews.basequipment.com) and have it re-direct to our Reviews page at http://www.resellerratings.com/store/survey/Burkett_Restaurant_Equipment_Supplies. The genius's at Volusion have never gotten this to work correctly and I have been asking them for years now (yes years). Our nameservers are on Volusion and we are hosted through GoDaddy. Volusion tells me to use their "CPanel" to update DNS Records to this: reviews | CNAME | www.resellerratings.com This doesn't even work when going to reviews.basequipment.com and of course does not do the full job as I want to go to http://www.resellerratings.com/store/survey/Burkett_Restaurant_Equipment_Supplies So I have then tried doing a Forward Subdomain in GoDaddy. Added subdomain "reviews" and forward to the link I mentioned above, with no avail (im assuming because my nameservers reside on Volusion). Has anyone had experience doing this, or does anyone know of any suggestions? Volusion is pretty limited with this and as I've said, I have been trying this for years and I've finally decided to consult the community here at stackflow. Thanks in advance.

    Read the article

  • what does STOP service do in Windows?

    - by Radek
    I start my web server as web service on Windows XP. How it was done is described here My web server is coded in ruby/sinatra and I start it in .bat file. That file is used by the service too. Manually I stop the web server by pressing CTRL+C in the dos window. How can I stop the server now as it started via service? I found out that I can stop it via taskkill /f /t /im ruby.exe Is there any way I can use the MMC stop service function to stop the web server? runweb.bat c: cd C:\web ruby C:\web\web2.rb

    Read the article

  • Windows Xp, Svchost.exe connecting to different ips with remote port 445

    - by Coll911
    Im using Windows Xp professional Sp2 Whenever i start my windows, svchost.exe starts connecting to all the possible ips on lan like from 192.168.1.2 to 192.168.1.200 The local port ranges from 1000-1099 and the remote port being 445. After its done with the local ips, it starts connecting to other random ips. I tried blocking connections to the port 445 using the local security polices but it didn't work Is there any possible way i could prevent svchost from connecting to these ips without involving any firewall installed ? since my pc slows down due to the load I'd be thankful for any advices

    Read the article

  • How to know if it's phishing or not in android apps?

    - by Zakaria Dza
    In IM apps (not only), there is a browser frame that appears and prompts for example to connect to facebook account, ebuddy for example (can't post pictures :( ) http://nsa34.casimages.com/img/2013/06/26//130626121230193046.jpg My question is: how can I know if this frame is from facebook.com and not a phishing website. I know that the apps in the play store are legit (mostly at least), but how can we trust apps that we install from outside the store? Or is there any way to check the credentials form action? Thanks for your answers and sorry for my bad english. (And sorry for the picture, couldn't make a screenshot ;-) )

    Read the article

  • MySQL cluster: 20Tb x 3K tables

    - by ethrbunny
    Over the next 2-3 years we will be scaling up data collection for a project. As a result the amount of data will grow 10-fold. Our current MySQL installation can keep up with the 2Tb of data but for larger queries there is a fair amount of IOWait. Im investigating a migration to a clustered solution to spread out the IO but am wondering about NDB and what happens to data that doesn't get accessed very often. The impression I get from reading about MySQL cluster is that it relies on memory tables for most of the data. What happens with tables that don't get accessed very often (or at all)? And how does backup work? Can I use MYSQLDUMP or is there a better solution?

    Read the article

  • Impossible do find motherboard drivers to Dell Dimension 3000

    - by Masziej
    Hello, I recently formatet and reinstalled XP on my girlfriends computer. Ive had this computer since 2001, never formatet it, until now =) Anyway the problem is that i cant find any drivers for the motherboard (integrated audio, video and ethernet). as i said its an old ass Dell. Cant remember if I got any cds along with it. Even if i did theyre gone a long time ago. So, I ran CPUZ and got this: --Motherboard-- Dell Computer Corp. Model 0K8980 And started googling. But didnt find any drivers. Still cant So im asking for a little help here. I really need to get the computer going before she wants a new one :D And yes i have looked on dells homesite, but they dont seem to wanna host drivers for their old stuff

    Read the article

  • Best usb storage for my router, Asus RT-AC66U?

    - by Jason94
    I have the ASUS RT-AC66U and I want to add a USB storage to it. It has 2x USB, and Im already using one for my printer. So the last one I want to use to attach a USB storage, and I've read some reviews stating the throughput of the USB could be up to 18 mb/s. So in regard of USB storage, should I care about hard disk cache? Simple powered-over-usb seems to have 8 mb cache, other (externally powered) has 16 for instance.

    Read the article

  • Is the sql backend right choice for LDAP?

    - by skomak
    Hi, I have felt some troubles with LDAP dif database after unexpected system reboots. This databse was only read so it is confused why database have had errors. So im searching for replacement of this database. I think SQL would be more reliable. What do you think, is it? I need to know how much performance loss i'll meet then. How many more IOPS(I/O per second) in percentage I loss too. Thanks in advance, skomak

    Read the article

  • Deactivate GPU and use IGP

    - by squelos
    I am having some trouble with my Sony Vaio SVE1511W1e laptop. It has an ATI Radeon and the i5 has an IGP (i5 2450m). I don't often use my GPU, and the IGP would be just enough for most usage I do. Therefore, in order to improve the battery life, I wish to deactivate the GPU and use only the IGP. The problem is that my BIOS doesnt allow me to do so. But I believe it is possible to deactivate the GPU 'programatically'. I'm running Debian Wheezy on the 3.2.0.4 AMD64 kernel. The first problem I'm running into is that when I run lspci, my IGP doesnt show up. Could this be because im lacking a kernel module? (I chose a targeted installation). What are the solutions to deactivating a GPU and using an IGP on a Linux System such as debian?

    Read the article

  • Is it possible to continue torrent downloads from other client

    - by Nrew
    I have downloaded a torrent file but I downloaded it using bitlord. And because bit lord doesnt have the ability like initial seeding. I decided to use utorrent. Ive already tried to continue it. What I did was to: Opened the original torrent file in utorrent. Target where the incomplete bitlord incomplete file was. But it seems that utorrent isn't detecting the file and it makes another copy of it and start to download from the beginning. Im at about 80 percent and there are only 18 seeds but there's 17 leech. And my connection is slow so I really have to initial seed. Other details: I've reformatted the original machine where I downloaded it. Also didn't copy the original application.

    Read the article

  • Desktop file for my pythin script

    - by Jason94
    Hi! I would like to make a .desktop file for my Python script, but so far the only thing i have is a clickable icon on my desktop! It does nothing when i click it, so im guessing there is something wrong with the execution :) The desktop file: [Desktop Entry] Version=1.0 Type=Python Exec=/home/user/MyDocs/Python/EasySteer/Main.py Name=EasySteer Icon=steering_wheel X-Icon-Path=/usr/share/icons and I also tried: [Desktop Entry] Version=1.0 Type=Application Exec=/usr/bin/xterm "python /home/user/MyDocs/Python/EasySteer/Main.py" Name=EasySteer Icon=steering_wheel X-Icon-Path=/usr/share/icons But nothing works :D if it matters this is for my Nokia N900 mobile phone that runs Maemo linux, but i think the basics are the same.

    Read the article

  • solve dell xps delay on touchpad and keyboard

    - by iim.hlk
    I finally found the complete solution for a frustrating/weird problem i was facing. Problem A ) there is a touchpad delay when typing and try to use the touchpad? problem B ) there is a 1 second delay when press any key and try to use left click button through touchpad? pd: i make this because i searched a lot to get this solved and i want to share the solution, dont want any rep... my pc is a dell xps l521x, but im pretty sure it will apply for any xps model.

    Read the article

  • Creating a command that compress a file and save it on a usb, but cannot detect the usb in linux.

    - by Lance
    First of all I can't detect the USB on linux using the command line. I check the directory dev and still cannot find the usb. used the df command to check the usb. I plug and typed df and then unplug and typed df again and nothing changed. We are using a server(telnet) to use the command line of linux on a windows 7 OS. The second problem I have is how can I execute the bash script that I have made. It seems that I cant put my .sh file in /usr/bin/ I would like to make my command executable in all directories like a normal command. Sorry, im still newbie at this things. This is what I get on staying on Windows too much. Sorry for my english. Thank you in advance.

    Read the article

  • setting something disposed or invisible java

    - by OVERTONE
    this might be simple enough as just inserting the right method but i cant seem to get it right. i have a simple program with two buttons. each one changes the picture above them. but anytime i click the buttons i get some odd awt event queue error. i think its because im trying to add something to a frame after its already been made. package icnon; import javax.imageio.*; import javax.swing.*; import java.awt.*; import java.awt.event.*; public class FrameIconExample extends JFrame implements ActionListener { JLabel j; JPanel p, l, k; JButton picOne, picTwo; Container cPane; public FrameIconExample() { JButton picOne = new JButton("picOne"); JButton picTwo = new JButton("picTwo"); picOne.setName("picOne"); picTwo.setName("picTwo"); picOne.addActionListener(this); picTwo.addActionListener(this); JPanel p = new JPanel(new GridLayout(2, 1)); JPanel l = new JPanel(new FlowLayout()); JPanel k = new JPanel(new FlowLayout()); cPane = getContentPane(); j = new JLabel(new ImageIcon("../meet/src/images/beautiful-closeup-portrait-photography.jpg")); l.add(j); k.add(picOne); k.add(picTwo); p.add(l); p.add(k); add(p); } public static void main(String[] args) { FrameIconExample frame = new FrameIconExample(); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.setSize(new Dimension(300, 800)); frame.setTitle("Frame Icon Example"); // Display the form frame.setVisible(true); } @Override public void actionPerformed(ActionEvent e) { JButton temp = (JButton) e.getSource(); String src = "../meet/src/images/Majken Kruse portrait - john.jpg"; //System.out.println(src + " " + temp.getName()); if(temp.getName().equalsIgnoreCase("picOne")) { src = "../meet/src/images/beautiful-closeup-portrait-photography.jpg"; System.out.println(src + " " + temp.getName()); Icon img; j = new JLabel(new ImageIcon(src)); l.add(j); System.out.println("1"); } if(temp.getName().equalsIgnoreCase("picTwo")) { src = "../icontest/images/Majken Kruse portrait - john.jpg"; System.out.println(src + " " + temp.getName()); Icon img; j = new JLabel(new ImageIcon(src)); l.add(j); System.out.println("2"); } } } its all just the one program so if you copy paste it into an editor you can see the stack trace. but the source of the image files wont be there. does anyone know how id do it? or where im goin wrong? stack trace: ../meet/src/images/beautiful-closeup-portrait-photography.jpg picOne Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException at icnon.FrameIconExample.actionPerformed(FrameIconExample.java:68) at javax.swing.AbstractButton.fireActionPerformed(Unknown Source) at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source) at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source) at javax.swing.DefaultButtonModel.setPressed(Unknown Source) at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source) at java.awt.Component.processMouseEvent(Unknown Source) at javax.swing.JComponent.processMouseEvent(Unknown Source) at java.awt.Component.processEvent(Unknown Source) at java.awt.Container.processEvent(Unknown Source) at java.awt.Component.dispatchEventImpl(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Window.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source)

    Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >