Search Results

Search found 13928 results on 558 pages for 'changes'.

Page 182/558 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

  • VertTwoFingerScroll and VertEdgeScroll not settable via xorg.conf

    - by James Wood
    I've just upgraded to Saucy (this was working in Raring). I've tried rebooting. Here's /etc/X11/xorg.conf: Section "InputClass" Identifier "Touchpad" Driver "synaptics" MatchIsTouchpad "on" Option "PressureMotionMinZ" "60" Option "MaxTapMove" "4" Option "PalmDetect" "1" Option "VertTwoFingerScroll" "1" Option "VertEdgeScroll" "0" EndSection And here's the output from synclient: LeftEdge = 100 RightEdge = 2408 TopEdge = 71 BottomEdge = 1249 FingerLow = 1 FingerHigh = 1 MaxTapTime = 180 MaxTapMove = 4 MaxDoubleTapTime = 180 SingleTapTimeout = 180 ClickTime = 100 EmulateMidButtonTime = 75 EmulateTwoFingerMinZ = 282 EmulateTwoFingerMinW = 7 VertScrollDelta = 56 HorizScrollDelta = 56 VertEdgeScroll = 1 HorizEdgeScroll = 1 CornerCoasting = 0 VertTwoFingerScroll = 0 HorizTwoFingerScroll = 0 MinSpeed = 1 MaxSpeed = 1.75 AccelFactor = 0.0705716 TouchpadOff = 2 LockedDrags = 0 LockedDragTimeout = 5000 RTCornerButton = 2 RBCornerButton = 3 LTCornerButton = 0 LBCornerButton = 0 TapButton1 = 1 TapButton2 = 3 TapButton3 = 0 ClickFinger1 = 1 ClickFinger2 = 1 ClickFinger3 = 0 CircularScrolling = 0 CircScrollDelta = 0.1 CircScrollTrigger = 0 PalmDetect = 1 PalmMinWidth = 10 PalmMinZ = 200 CoastingSpeed = 20 CoastingFriction = 50 PressureMotionMinZ = 60 PressureMotionMaxZ = 160 PressureMotionMinFactor = 1 PressureMotionMaxFactor = 1 ResolutionDetect = 1 GrabEventDevice = 1 TapAndDragGesture = 1 AreaLeftEdge = 0 AreaRightEdge = 0 AreaTopEdge = 0 AreaBottomEdge = 0 HorizHysteresis = 14 VertHysteresis = 14 ClickPad = 0 Notice that PressureMotionMinZ, MaxTapMove and PalmDetect are as specified in xorg.conf, but VertEdgeScroll and VertTwoFingerScroll aren't. I can set them temporarily via synclient VertEdgeScroll=0 and synclient VertTwoFingerScroll=1, but these changes are lost when I reboot. What's the best way of fixing this?

    Read the article

  • Architecture for subscription based application

    - by John
    This is about the architecture of my application I think. I have a Rails application where companies can administrate all things related to clients. Companies can buy a subscription and their users can access the application online. Hopefully I will get multiple companies subscribing to my appplication/service. Thing is, what should I do with my code and database? Seperate app code base and database per company One app code base but seperate database per company One app code base and one database The decision I am to make involves security (e.g. user from company X should not see any data from company Y) performance (let's suppose it becomes successful, it should have a good performance) and scalability (again, if successful, it should have a good performance but also easy for me to handle all the companies, code changes, etc) For sake of maintainability, I tend to opt for the one code base. For the database I really don't know at this moment. So what do you think is the best option?

    Read the article

  • Is it dangerous to substitute unit tests for user testing? [closed]

    - by MushinNoShin
    Is it dangerous to substitute unit tests for user testing? A co-worker believes we can reduce the manual user testing we need to do by adding more unit tests. Is this dangerous? Unit tests seem to have a very different purpose than user testing. Aren't unit tests to inform design and allow breaking changes to be caught early? Isn't that fundamentally different than determining if an aspect of the system is correct as a whole of the system? Is this a case of substituting apples for oranges?

    Read the article

  • Why is chunk size often a power of two?

    - by danijar
    There are many Minecraft clones out there and I am working on my own implementation. A principle of terrain rendering is tiling the whole world in fixed size chunks to reduce the effort of localized changes. In Minecraft the chunk size is 16 x 16 x 256 as far as I now. And in clones I also always saw chunk sizes of a power of the number 2. Is there any reason for that, maybe performance or memory related? I know that powers of 2 play a special role in binary computers but what has that to do with the chunk size?

    Read the article

  • Getting started with Team Foundation Server

    - by joe
    At work, we recently started using Team Foundation Server to manage our source code, i have no idea how to use this system. I do not know even know how to check source code in and out. Does anyone know of a step-by-step tutorial on how to work with TFS? Just for basic operations e.g. get latest version, upload your changes, etc. I am accessing it from Visual Studio 2010. I also have access to the TFS web interface.

    Read the article

  • Shelving code in Team Foundation Server (TFS)

    - by Mel
    I'm pretty new at using TFS and I'd like to know how you or your team use the "shelve" function of tfs. We have the following guidelines in using TFS: - perform a "Get Latest" before you check in and try to build/compile - do not check in code that does not compile - at the end of the day, if your work is not complete/partially done, you should "shelve" your pending changes The first two make sense but I don't really get the last one. I asked my mgr and he said that its so he knows that you actually did some work for that day, which does kind of makes sense but still, I'm wondering what other teams use the "shelve" function for?

    Read the article

  • Unity Launcher and Menu Bar disappeared in 14.04

    - by Justice2497
    The menu bar and Unity launcher have disappeared in Ubuntu 14.04. Also cannot access the terminal via ctrl + alt + t. I have tried every solution for this issue that I can find, from re-installing untiy and compiz to resetting Unity and everything. I've gone into the compiz manager and reactived Unity. Nothing has worked. When trying to reset Unity, or do anything with it really, I get this message (process:6332): dconf-WARNING **: failed to commit changes to dconf: Could not connect: Connection refused EDIT: Installed 14.04 a day ago. The issue happened after a reboot. After installing virtual Box

    Read the article

  • How do I unlock a user account?

    - by John Kotrla
    I've been to system settings and to User Accounts. My account is the only one on the system and I have previously been able to UnLock the screen so that I could set my account to login without password prompt. That didn't make any effect on the system. I still have to enter a password to log in, but now I can't unlock the User Accounts dialog to make any changes at all. What do I need to reset? note how the unlock box in the upper right hand corner isn't available for selection...

    Read the article

  • Google's process for publishing/modifying pages [closed]

    - by Glenn Dayton
    I'm assuming that a group of people at Google have control of certain sections of google.com, but how does Google make sure that employees don't accidentally or intentionally sabotage the website? Does Google use Adobe Contribute or some similar product for sharing/publishing the website. Do employees use WebDAV, FTP, SFTP, or SSH to publish the site. Since Google has hundreds of thousands of servers it probably takes some time for its servers to update. Do they transmit the new copy of the website to all servers before publishing at once? This question does not apply to Google editing a database and having a page reflect the database's changes. It applies to employees editing the source code and/ or back end of the site.

    Read the article

  • How do you unit test your javascript

    - by Erin
    I spend a lot of time working in javascript of late. I have not found a way that seems to work well for testing javascript. This in the past hasn't been a problem for me since most of the websites I worked on had very little javascript in them. I now have a new website that makes extensive use of jQuery I would like to build unit tests for most of the system. My problems are this. Most of the functions make changes to the DOM in some way. Most of the functions request data from the web server as well and require a session on the service to get results back. I would like to run the test from either a command line or a test running harness rather then in a browser. Any help or articles I should be reading would be helpful.

    Read the article

  • Interpolating between two networked states?

    - by Vaughan Hilts
    I have many entities on the client side that are simulated (their velocities are added to their positions on a per frame basis) and I let them dead reckon themselves. They send updates about where they were last seen and their velocity changes. This works great and other players see this work find. However, after a while these players begin to desync after some time. This is because of latency. I'd like to know how I can interpolate between states so they appear to be in the correct position. I know where the player was LAST seen and their current velocity but interpolating to the last seen state causes the player to actually move -backwards-. I could not use velocity at all for other clients and simply 'lerp' them towards the appropriate direction but I feel this would cause jaggy movement. What are the alternatives?

    Read the article

  • Upcoming Database Design Pre-Cons

    - by drsql
    In July and October, I will be doing my "How To Design a Relational Database" full day conference in two places. First on July 26 for the East Iowa SQL Saturday , and then for the big daddy SQLPASS Summit in Charlotte, NC on October 14. You can see the entire abstract here on the SQL PASS site. It is essentially the same concept as last year, but this year I am making a few big changes to really give the people what they have desired (and am truly glad to have a swing at it several months...(read more)

    Read the article

  • Brightness controls doesn't work on a MacBook Pro 5.5

    - by Jeff Labonte
    I recently installed Ubuntu on my MacBook pro 5.5 (mid 2009). I have a problem with the brightness control. The thing is, when I try to reduce the brightness of my display which would help my battery life dramaticlly is doesnt work. I tried to use the system preference but no succes. I tried to look of it changes something if disconnect the computer from the charge I the screen will dimm but once against I failed. I tried many things such as pommed or Many other little things that I have had read on forums.

    Read the article

  • Alsa version numbers not consistent

    - by user69245
    I've recently moved from 10.04 to 12.04 and have problems with crackles on audio when the screen changes (especially obvious in a Skype conversation with video). !!Kernel Information !!------------------ Kernel release: 3.2.0-26-generic-pae Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.24 Library version: 1.0.25 Utilities version: 1.0.25 Running through the SoundTroubleShooting procedures I got the above details at Step 3. Is the mismatch between the Driver version (1.0.24) and the Library and Utilities versions (1.0.25) the cause of my problem, or should I be looking elsewhere? In answers to the question "Will ALSA 1.0.25 version have time to enter 12.04?" I read that 1.0.25 would be part of the new kernel, but my kernel version appears to be newer than the original release.

    Read the article

  • Best practices for including open source code from other public projects?

    - by Bryan Kemp
    If I use an existing open source project that is hosted for example on github within one of my projects, should I check in the code from the other project into my public repo or not? I have mixed feelings about this, #1 I want to give proper credit and attribution to the original developer, and if appropriate I will contribute back any changes I need to make. However given that I have developed / tested against a specific revision of the other projects code, that is the version that I want to distribute to users of my project. Here is the specific use case to illustrate my point. I am looking for a more generalized answer than this specific case. I am developing simple framework using rabbitmq and python for outbound messages that will allow for sending sms, twitter, email, and is extensible to support additional messaging buses as well. There is a project on github that will make the creation and sending of SMS messages developed by another person. When I create my own repo how do I account for the code that I am including from the other project?

    Read the article

  • C# Toolbox: Debug-able, Self-Installable Windows Service Template Redux

    - by James Michael Hare
    I had written a pair of posts before about creating a debug-able and self-installing windows service template in C#.  This is a template I began creating to ease creating windows services and to take some of the mundane tasks out of the coding effort.  The original posts were here: C# Windows Services (1 of 2) - Debug-able Windows Services C# Windows Services (2 of 2) - Self-Installing Windows Services But at the time, though I gave the code samples I didn't have a downloadable for of the template on the blog.  After getting many requests for the actual source, I zipped it up and am posting it with this blog entry.  Click on the link below to download the archive.  The password on the archive is, imaginatively enough, password.  Hope you enjoy and please feel free to comment and suggest changes! Debug-able, Self-Installing Windows Service Template download Enjoy! Tweet Technorati Tags: C#,Windows Service,Toolbox

    Read the article

  • Are Remote commit hooks in subversion possible?

    - by John Hamelink
    Hi there, my current setup is as follows: We have a Linux samba share that contains all the repository folders (with the hooks folder inside, amongst the others) All the developers have the share mapped as a network drive, and import to a local directory (normally C:\Server\RepositoryName) where they work on their files. All the machines accessing the drive (unfortunately) run windows. What I'm aiming to do is to have a hook on the Linux server that detects when a commit has been made, by which project, the revision number, the name of the developer who committed, etc. I looked into the hooks files, but they seem to be ran by the client. Is there a way to monitor svn changes and collect the relevant information from the Linux server?

    Read the article

  • Two "search" entries in resolv.conf

    - by Carsten
    I am using 12.04 and have a problem with my resolv.conf There are 2 search lines there. But I can only explain one. I would like to get the other one removed. carsten@myubuntubox:~$ cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 127.0.0.1 search aaaa.bbb.example.net search something nameserver 1.2.3.4 nameserver 1.2.3.5 I can't explain the search aaaa.bbb.example.net Where does it come from? The last 3 lines (like I want come from /etc/resolvconf/resolv.conf.d/tail This is good. But where is the other search line coming from? In /etc/dhcp/dhclient I removed the requests for domain-name-servers, domain-search, but the lines are still in there. Should I remove the dhcp6.domain-search as well?

    Read the article

  • Does dist-upgrade require PPA software to be uninstalled first?

    - by seb
    Hi all, I'm still running Ubuntu 10.04 with quite a few PPAs. Amongst the PPAs there is Guiodic (Guido Iodice) Lucid quasi-rolling :) PPA which brings most recent versions of many programs to my desktop. My steps: sudo update-manager -d click on upgrade on the appearing window wait for the magic to happen: prepare to upgrade and setting new software channels during 'calculating the changes' I will get the following error message in the panel An error occurred, please run Package Manager form the right-click menu or apt-get in a terminal to see what is wrong. The error message was: ' Error: Marking the upgrade (E:Error, pkgProblemResolver::Resolver generated breaks, this may be caused by help packages.)'This usually means that your installed packages have unmet dependencies When I check Synaptic/apt-get I can't find any errors or hint toward broken packages Could this error be because of many PPA versions being newer than 10.04 original versions?

    Read the article

  • Issues with the intended behavior of a Service layer?

    - by Rafael Cichocki
    This analysis makes sense, and states anything that avoids code duplication and simplifies maintenance speaks for a service layer. What is the technical behavior? When a service client references a service, does it do so at runtime, or does it happen at compile time? When I change something in the service layer code, will this change be automatically taken into account in all it's clients, or do they need to be individually recompiled? How does this make sense from a testing point of view - I have working code, based on some code from a service, but if that service changes, my code might break?!

    Read the article

  • Save to Hard Drive instead of bootable USB

    - by WAM
    I followed the instructions on the Ubuntu website on how to put Ubuntu 12.04 on a USB and make it a bootable USB stick for windows. It worked fine and I can boot up and run Ubuntu, but every time I try to download software or change settings it tries to save it to the USB rather than the hard drive built into the computer. The USB doesn't have enough space so the download fails and in addition it doesn't retain setting changes so when I restart my computer all the settings return to default and anything I saved is gone. Is there any way to change things so that when I download software or change settings Ubuntu will save it to my hard drive instead of the USB?

    Read the article

  • Google Authorship Image of my blogspot has been disappeared in Google SERP. Why?

    - by Sathiya Kumar
    I have a blogspot and i used my image to appear on the Google SERP for my keywords using Google Authorship Markup. My image was showed for last 2 months but while checking SERP for my blog, i found that my authorship markup is not working. My image, name and G+ followers count is not appearing near my blogspot URL in SERP. I didn't made any changes in my google+ profile or in my blogspot header tag where i had put the authorship code. I tried to find the reason but i didn't find any value answer. May anyone answer this question. Please let me know if you had already experienced like this.

    Read the article

  • Ensure Future Browser Compatibility - SharePoint Branding

    - by KunaalKapoor
    HTML and Future Internet Explorer Compatibility with SharePointAs new versions of Internet Explorer are released, the way HTML is rendered by the browser could change over time. To address the possibility of changes, Microsoft uses the X-UA-Compatible META tag that targets HTML markup to a specific version of Internet Explorer. The default SharePoint 2010 master pages are set to force current and future versions of Internet Explorer to render HTML in Internet Explorer 8 mode like the following markup:<meta http-equiv="X-UA-Compatibile" content="IE=IE8" />The Adventure Works Travel HTML includes the META tag to help ensure future Internet Explorer versions will display the SharePoint HTML properly.For more information about the Internet Explorer Standards Mode, see META Tags and Locking in Future Compatibility.

    Read the article

  • What are the advantages and disadventages of git or bzr + rsync vs rdiff-backup?

    - by Azendale
    I used to use rsync to do backups, but then I switched to rdiff-backup to incremental backups. Recently, I discovered git and bzr while working on a coding project. So, I was thinking, I could have my backup disk be a repository in either git or bzr. Then I could rsync to the repository, and commit the changes. Would there be any performance concerns with this? Any other issues that I'm not thinking of? The benefit I see in using rsync is that you can restart an interrupted transfer, while rdiff-backup reverts to the last version, and then starts again. Any reason not to do it this way? Anything I'm not thinking of?

    Read the article

  • New Time Zone Patch DST V18 is available

    - by Mike Dietrich
    Sorry for not updating the blog more often at the moment - but more updates will come soon as I play around with Oracle Restart and single instance databases in ASM with Oracle 11.2. Just on the side there's a new time zone patch to DST V18 available since May 2012. You can download it via PATCH download from MOS with the patch number: 13417321 What do you think? Will Lufthansa operate a faster jet the other night? Will the jet stream be more powerful? Or a better type of fuel? Or is it just the travel portal which hasn't applied the correct time zone patches to catch DST change that night in the US whereas it happens two weeks later in Europe? Guess ... And please see the readme about how to apply the patch and our slides about why time zone patching may be important even in your environment RDBMS bug: Bug 13417321: DST 18 : HALF YEARLY DST PATCHES, MAY 2012 OJVM Bug 14112098 - dst changes for dstv18 (tzdata2012c) - need ojvm fix

    Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >