Search Results

Search found 13164 results on 527 pages for 'missing'.

Page 185/527 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• Why do I see router and not my real IIS?

  - by Tim Tom

  I am trying to access IIS through web but unable to do so. Basically I have a router (which functions as router and modem) that is given by ISP and I have another router connected to the router given by ISP. My ISP's router can be visited through 192.168.0.1 and the router that I connected to ISP's router can be visited through 192.168.1.1 Please see my ISP's router: As you can see I have DMZ enabled for my router of 192.168.1.1 Now please see my router of 192.168.1.1: As you can see I added a virtual server for port 80 where 192.168.1.125 is my private IP. I rebooted both of my modems an tried to visit my IP from: http://www.whatsmyip.org/ and after doing so, when I type my live IP I still see my router of 192.168.0.1 instead of my IIS. What am I missing? Note: I have disabled Firewall on both of the routers. Any help would be appreciated.

  Read the article

• Why do I see router and not my real IIS?

  - by Tim Tom

  I am trying to access IIS through web but unable to do so. Basically I have a router (which functions as router and modem) that is given by ISP and I have another router connected to the router given by ISP. My ISP's router can be visited through 192.168.0.1 and the router that I connected to ISP's router can be visited through 192.168.1.1 Please see my ISP's router: As you can see I have DMZ enabled for my router of 192.168.1.1 Now please see my router of 192.168.1.1: As you can see I added a virtual server for port 80 where 192.168.1.125 is my private IP. I rebooted both of my modems an tried to visit my IP from: http://www.whatsmyip.org/ and after doing so, when I type my live IP I still see my router of 192.168.0.1 instead of my IIS. What am I missing? Note: I have disabled Firewall on both of the routers. Any help would be appreciated.

  Read the article

• can't rotate display on windows 7

  - by Barry Fandango

  I'm running 64-bit windows 7 on a dell inspiron 1525 with an Intel 965 graphics chipset. When I bring up the "screen resolution" settings, I can set up my primary and secondary display (the laptop + an LCD monitor) but there is no option for rotation. I'm used to using this feature at work so I was surprised to see it missing. I installed dell's latest drivers for this chipset (although they were not marked as w7 or 64 bit) and no change. Any idea what's going on here? Thanks superusers!

  Read the article

• Security and Windows Login

  - by Mimisbrunnr

  I'm not entirely sure this is the right place for the is question but I cannot think of another so here goes. In order to login to the windows machines at my office one must press the almighty CTRL-ALT-DELETE command combo first. I, finding this very frustrating, decided to look into why and found claims from both my sys and Microsoft stating that it's a security feature and that "Because only windows could read the CTRL-ALT-DELETE it helped to ensure that an automated program cannot log in. Now I'm not a master of the windows operating system ( as I generally use *nix ) but I cannot believe that "Only windows can send that signal" bull. It just doesn't sit right. Is there a good reason for the CTRL-ALT-DELETE to login thing? is it something I'm missing? or is it another example of antiquated legacy security measures?

  Read the article

• Google Search Appliance: Limiting Number of Results

  - by senfo

  I am attempting to limit the number of results that are displayed as a result of dynamic result clustering on the Google Search Appliance. I've looked through the XSLT, but I've only come across the following two user-modifiable options: <!-- *** dyanmic result cluster options *** --> <xsl:variable name="show_res_clusters">1</xsl:variable> <xsl:variable name="res_cluster_position">right</xsl:variable> Are there more options that I'm unaware of that I could use to limit the results? Is there another way that I'm missing?

  Read the article

• Why are Excel weekdays wrong for 1900?

  - by Jeroen Wiert Pluimers

  This question is based on the observations of AdamV in his answer on How do I get the day name into a cell in Excel? When A1 has the value 2009-08-01, then: =WEEKDAY(A1) will obtain 7 =TEXT(7, "dddd") will obtain Saturday =TEXT(7,"dddd, yyyy-mm-dd") will obtain Saturday, 1900-01-07 =TEXT(1,"dddd, yyyy-mm-dd") will obtain Sunday, 1900-01-01 =TEXT("1900-01-01","dddd, yyyy-mm-dd") will also obtain Sunday, 1900-01-01 The last two are wrong: the 1st of January 1900 is actually a Monday. Various sources seem to confirm that: January 1900 - Wikipedia, the free encyclopedia. Year 1900 Calendar – The Netherlands. Year 1900 Calendar – United States. What am I missing? Why is Excel doing this wrong?

  Read the article

• Apache whitelist a single location, but require basic auth for everything else

  - by Chris Lawlor

  I'm sure this is simple, but Google is not my friend this morning. The goal is: /public... is openly accessible everything else (including /) requires basic auth. This is a WSGI app, with a single WSGI script (it's a django site, if that matters..) I have this: <Location /public> Order deny,allow Allow from all </Location> <Directory /> AuthType Basic AuthName "My Test Server" AuthUserFile /path/to/.htpasswd Require valid-user </Directory> With this configuration, basic auth works fine, but the Location directive is totally ignored. I'm not surprised, as according to this (see How the Sections are Merged), the Directory directive is processed first. I'm sure I'm missing something, but since Directory applies to a filesystem location, and I really only have the one Directory at /, and it's a Location that I wish to allow access to, but Directory always overrides Location... EDIT I'm using Apache 2.2, which doesn't support AuthType None.

  Read the article

• OSX Keyboard Shortcuts in Dialogs?

  - by Dan Fabulich

  On Windows, every dialog box includes underlined letters that you can activate using the Alt key. I use these "Alt" keyboard shortcuts all the time; I'm missing them as I'm trying to switch to OSX. On OSX, all I can find is Tab navigation, which requires you to press Tab seven or eight times to get anywhere in most dialog boxes. (And even that is hidden by default: you have to enable "Full keyboard access" in the "Keyboard & Mouse" control panel to be able to Tab between buttons.) Is there some way I can get something like the Windows Alt accelerators for OSX dialogs? I'm willing to write Automator code, download/purchase software, etc. Specifically, I'm imagining maybe something where you do some shortcut command and then start typing the name of the button, and hit Enter to push the button...?

  Read the article

• Windows Server 2012 Metro shortcut icons do not show for other users

  - by Andrew

  I have installed SQL Server 2012 and SharePoint 2013 on my Windows Server 2012 machine using a dedicated domain install account. When I log into the same machine with a user account, all the icons for these applications are missing! I can still access the applications by finding them in 'Program Files', however it is very annoying. (For example, I'm not exactly sure where the SharePoint PowerShell is located, and frankly I don't want to know either) In previous versions of Windows Server, the Icons always showed up in the Start Menu. Does anyone know how I can copy the shortcuts in one account to another?

  Read the article

• How to lock screen in linux before hibernating?

  - by Emanuel Ey

  So when i hibernate my laptop the screen doesn't lock automatically. To solve this i've changed /etc/acpi/powerbtn.sh to contain: su - myUsername -c "gnome-screensaver-command -l" sudo pm-hibernate exit 0 When running this file from a command line it works as intended (ie, lock the screen and then hibernate). Unfortunately, when pressing the power button, it still just hibernates without locking the screen -what am I missing? EDIT: I've added the line whoami>>~/Desktop/test.txt to verify which user is executing the /etc/acpi/powerbtn.shscript. When pressing the power button, the file test.txt is created, but is empty. From this i conclude that the script is in fact being called when pressing the power button. What i do not understand is how the output of whoami can be empty...

  Read the article

• Remote deploying wars to a liferay installation

  - by iftrue

  With vanilla tomcat, you can POST to URLs beneath SOMURL/manager/ with a proper manager user role defined. The liferay deployment of tomcat, however, is missing the manager and host-manager applications, and when I copy the directories from a vanilla Tomcat installation, I get the exception below: Exception: javax.servlet.ServletException: Error allocating a servlet instance org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:558) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) java.lang.Thread.run(Thread.java:636) root cause java.lang.SecurityException: Servlet of class org.apache.catalina.manager.HTMLManagerServlet is privileged and cannot be loaded by this web application org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:558) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) java.lang.Thread.run(Thread.java:636) What's the proper way to remote deploy wars to a liferay instance? (Not portlets, in my case.)

  Read the article

• Convert a gray PNG with alpha to a 1-bit black rectanble with 8-bit alpha

  - by jcayzac

  I use a tool to render LaTeX equations as PNG. The resulting images are in RGBA8888 format. I would like to extract the luminance (grayscale from RGB channels, multiplied by the A channel) as my new alpha channel, set the picture fully black, and save the result in Gray1Alpha8 (G1A8) format. So far I've only managed to get G1A4 or G8A8 but not G1A8. Also, the resulting picture looks like it's not multiplied correctly… convert original.png \ \( -clone 0 -alpha extract \) \ \( -clone 0 -clone 1 -compose multiply -composite \) \ -delete 0 +swap -alpha off -compose copy_opacity -composite -colorspace Gray -depth 4 result.png What am I missing?

  Read the article

• Getting NFS clients to retry mount if NFS server down when client boots

  - by z0mbix

  I have an NFS server that several clients mount. I am using the following in my /etc/exports on the server: /content *(rw,no_root_squash) and on the clients in my /etc/fstab I have: content.prd.domain.tld:/content /content nfs rw,hard,intr 0 0 If the clients boot while the NFS server is down, the share does not get mounted. I read in the NFS man page that the retry defaults should handle this: retry=n The number of minutes to retry an NFS mount operation in the foreground or background before giving up. The default value for forground mounts is 2 minutes. The default value for background mounts is 10000 minutes, which is roughly one week. I have tested this, but it doesn't appear to work. Am I missing something? All servers are RHEL 5.4. Cheers z0mbix

  Read the article

• Audio input problem in Ubuntu 9.10

  - by Andrea Ambu

  My audio input is a mix of my mic output and my sound card output. I'd like it to be just my mic output. I was able to do so in Ubuntu 9.04 but the interface is 9.10 is totally changed and I tried every my creativity was able to think. It's really annoying when talking to other people over the internet because they keep hearing their voice back. I'm not sure I explained it in clear way so I'll give you an example: What I do: I put an mp3 on play or a video on youtube then open a recorder and start to talk on my mic. What happens: both my voice and audio from mp3/youtube get reordered, even if I put headphones volume to 0 (via hardware). What I'd like to happen: Only my voice should be recorded. I'm sure I'm missing some technical term, but that's the problem and I'd like to solve it in Ubuntu 9.10, any idea?

  Read the article

• what software will rip a CD to flac files in one step?

  - by jcollum

  I'm using EAC to rip files to FLAC. Seems fine. But for a large amount of CDs (200 or so) the process is a little labor intensive. There's 4 or 5 clicks in there that seem extraneous -- EAC seems to want to rip the CD to a set of WAV files then (after all those files are ripped) I have to select "Process WAV files" (I'd get it exact, but EAC is occupied right now). I'd like to send all of it to FLAC files in just a few steps: get cddb info, select art, rip. Is there a way to do this with EAC that I'm missing? Haven't been able to find anything on the web that explains this. Is there a better program for this?

  Read the article

• Batch processing multi-TIFF in Irfan view

  - by hemalshah

  I have to convert DPI of more than 5k Tiff images on a monthly basis from 200x200 to 100x100. I can do that in Irfan view using a .bat file that i have created.. the following is the .BAT file code @"c:\program files\irfanview\i_view32.exe" "e:\batch1*.tif /aspectratio /resample /tifc=4 /dpi=(100,100) /convert=e:\batch2*.tif" %* Where tifc=4 is Fax 4 compression However, the above code doesn't help me change the DPI for other pages except for Only the first page in the tiff thats getting converted to 100 DPI. Rest all pages are still 200 DPI. I am using WinXP Professional and Irfan View. Can anyone tell me what I am missing. Or any other alternative program where I can create a .bat file and run the batch process using Command line?

  Read the article

• Rebuilding /etc/rc?.d/ links

  - by timday

  A regular filesystem check on a Debian Lenny system triggered an fsck, and that nuked a handful of links in the /etc/rc?.d hierarchy (unfortunately I didn't keep a list). The system seems to boot and run normally, but I'm worried its storing up trouble for the future. Is there an easy (fairly automatic) way of rebuilding this piece of the system ? As I understand it, the links are generally manipulated by package postinst scripts using update-rc.d (and I haven't made any changes from the installed defaults). Without any better ideas, my plan is one of: Diff a listing with another similar system to identify which packages need their links repairing. Wait until the system is upgraded to Squeeze (hopefully not too long :^) and assume the mass package upgrade will restore all the missing links.

  Read the article

• Bitbucket SSH and iptables

  - by Astaz3l

  I'm a newbie in iptables to be honest. I have some basic rules. Everything is blocked by default. iptables -t filter -F iptables -t filter -X iptables -t filter -P INPUT DROP iptables -t filter -P FORWARD DROP iptables -t filter -P OUTPUT DROP iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT ...some rules for http, ftp etc... iptables -t filter -A OUTPUT -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -t filter -A INPUT -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT With the last two lines i'm trying to open the access for ssh so i can connect to bitbucket. When i try to connect to bitbucket: ssh -Tv [email protected] I got the error - connection timed out. But when I disable iptables i can connect without any problems. What am i missing? Should I add any additional rules?

  Read the article

• Can iptables allow Squid to process a request, then redirect the response packets to another port?

  - by Dan H

  I'm trying to test a fancy traffic analyzer app, which I have running on port 8890. My current plan is to let any HTTP request come into Squid, on port 3128, and let it process the request, and then just before it sends the response back, use iptables to redirect the response packets (leaving port 3128) to port 8890. I've researched this all night, and tried many iptables commands, but I'm missing something and my hair is falling out. I thought something like this would work: iptables -t nat -A OUTPUT -p tcp --sport 3128 -j REDIRECT --to-ports 8990 This rule gets created ok, but it never redirects anything. Is this even possible? If so, what iptables incantation could do it? If not, any idea what might work on a single host, given multiple remote browser clients?

  Read the article

• EC2 out of space on root disk, moving it to ephemeral

  - by Joseph Misiti

  I am spawning a few test servers on ec2 that happen to be m1.larges. I am using these test servers for load balancin testing. Anyways, most of the servers I have used before have been backed by EBS, but these instances (ubuntu 11.04) obviously come with a lot of ephemeral space located @ /mnt. What I noticed that is happening is I am running on space on the root disk. I am trying out this tutorial http://www.turnkeylinux.org/docs/using-instance-storage moving my /home + /usr directories to /mnt and then remounting them. This works except it does not survive a reboot. Am I missing something here or is this tutorial not completely correct. How do I make space on my / drive so I can do stuff and survive re-boots.

  Read the article

• Unable to connect to sites using IIS7 Manager

  - by Phil.Wheeler

  I'm a developer who has been assigned the task of managing and configuring a new IIS7 instance on a remote server. My domain account has been added as to the local Administrators group on the box, but IIS7 has been configured to accept connections only from accounts with Windows credentials. I've added my domain account to the IIS Manager Permissions for one of my sites, but I'm still unable to connect to either that site, the IIS instance or the server in general from my local machine. There's obviously a missing element to the configuration of this setup but I don't know where to start looking. The event logs on the IIS box show audit failures for my account when trying to connect remote via the IIS7 Manager tool on my local machine. Suggestions gratefully received.

  Read the article

• Is there a way to set access to WMI using GroupPolicy?

  - by Greg Domjan

  From various documentation it appears that to change WMI access you need to use WMI to access the running service and modify specific parts of the tree. Its kind of annoying changing 150,000 hosts using the UI. And then having to include such changes in the process of adding new hosts. Could write a script to do the same, but that needs to either connect to all those machines live, or be distributed for later update say in an startup/install script. And then you have to mess around with copying binary SD data from an example access control. I've also found you can change the wbem/*.mof file to include an SDDL but I'm really vague on how that all works at the moment. Am I just missing some point of simple administration?

  Read the article

• Can't access Administrator account on Windows XP after adding local user account

  - by bwerks

  I have an installation of windows XP, and it's not part of a domain. Previously, it just had only the administrator account, and upon creating a different user account, all access was lost to the administrator account. When the machine starts up, only the new local account is offered for login, which seemed strange. I've checked that the administrator account was not disabled, nor are any rights missing from the local security policy. Furthermore, the administrator account is accessible via remote desktop, where an opportunity is given to type the desired account. REALLY strange. Upon deletion of the new local user account, the administrator account appeared again. Can anyone tell me what's going on?

  Read the article

• How to install imagemagick on windows 7

  - by learner

  How to install image magic at windows 7. I followed these instruction To install IMagick on windows xp (php 5.2.x) 1.) download and install ImageMagick-6.5.8-7 Q16-windows-dll.exe imagemagick.org/download/binaries/ ImageMagick-6.5.8-7-Q16-windows-dll.exe 2.) download php_imagick_dyn-Q16.dll from: valokuva.org/outside-blog-content/ imagick-windows-builds/080709/ copy dll to [PHP]/extension dir and rename it to php_imagick.dll 3.) You have to edit your php.ini file and add new extension "extension=php_imagick.dll" 4.) Save ini file and restart apache server. (If necessary, restart your windows) 5.) phpinfo() should show imagick enabled. after that I execute a sample script but its not working. it shows the Imagic class missing error. Please help me to install Imagick. :-(

  Read the article

• SQL Server 2005 Default Backup Plan

  - by tylerl

  I noticed that a newly imported database on SQLServer 2005 had configured itself (without my knowledge) to perform daily backups; but it's not deleting old files and quickly filling up the disk. I don't know how the backup job got configured (maybe that's something that gets transferred when you move a database?) but I'm having trouble modifying it. The backup runs as part of SQL Server Agent job called "Daily Backups". This job runs a package called "(SSIS Packages)\Maintenance Plans\Backup Plan" -- which I can't find. The "Management\Maintenance Plans" area for my server is empty. I imagine I could delete the existing plan and re-create it manually, but I was hoping to just modify what was already there, since all that's missing is deleting old files.

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >