Search Results

Search found 22532 results on 902 pages for 'computer hardware'.

Page 187/902 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

  • Is Infiniband going to get squeezed by iWARP and external QPI?

    - by andy.grover
    The Inquirer certainly thinks so.However, I'm not so sure it makes sense to compare Infiniband to an as-yet-unannounced optical external QPI. QPI is currently a processor interconnect. CPUs, RAM, and devices connected by it are conceptually part of the same machine -- they run a single OS, for example. They are both "networks" or "fabrics" but they have very different design trade-offs.Another widely-used bus in the system is closer to Infiniband than QPI -- PCI Express. Isn't it more likely that PCIe could take on IB? There are companies already who have solutions that use external PCI Express for cluster interconnect, but these have not gained significant market share. Why would QPI, a technology whose sweet spot is even further from Infiniband's than PCIe, be able to challenge Infiniband? It's hard to speculate without much information, but right now it doesn't seem likely to me.The other prediction made in the article is that Intel's 10GbE iWARP card could squeeze IB on the low end, due to its greater compatibility and lower cost.It's definitely never a good idea to bet against Ethernet when it comes to mass-market, commodity networking. Ethernet will win. 10GbE will win. But, there are now two competing ways to implement the low-latency RDMA Verbs interface on top of Ethernet. iWARP is essentially RDMA over TCP/IP over Ethernet. The new alternative is IBoE (Infiniband over Ethernet, aka RoCEE, aka "Rocky"). This encapsulates the IB packet protocol directly in the Ethernet frame. It loses the layer 3 routability of iWARP, but better maintains software compatibility with existing apps that use IB, and is simpler to implement in both software and hardware. iWARP has a substantial head start, but I believe that IBoE silicon will eventually be cheaper, and more likely to be implemented in commodity Ethernet hardware.I think IBoE is going to take low-end market share from traditional IB, but I think this is a situation IB hardware vendors have no problem accepting. Commoditized IBoE NICs invite greater use of RDMA features, and when higher performance is needed, customers can upgrade to "real" IB, maintaining IB's justification for higher prices. (IB max interconnect speeds have historically been 2-4x higher than Ethernet, and I don't see that changing.)(ObDisclosure: My current employer now sells IB hardware. I previously also worked at Intel. My opinions are my own, duh.)

    Read the article

  • How to leave the teamviewer window with Alt+Tab

    - by rubo77
    I use Teamviewer on Ubuntu (Not sure if the problem is the same on Windows). Whenever I use Alt+TAB to change the focussed window on my computer to another window while the remote window has focus the remote window catches the Alt keydown event but not the Alt release event! So when I get back to the remote Teamviewer window the remote computer still has the Alt Key stuck pressed. How can I prevent that the Alt-key gets stuck on the remote computer?

    Read the article

  • How do you troubleshoot Family Safety reports

    - by Klas Mellbourn
    I have set up Microsoft Family Safety in Windows 8 for my daughter's account. At first I got meaningful reports via e-mail each week. But then the e-mails started reporting no activity, even though my daughter still uses the computer. The e-mails are still sent to me, but indicate that she is not using the computer at all. Family Safety is definitely still active on the computer. It limits how long she can use the computer. So only the e-mail reports are buggy. I don't know how to troubleshoot this since the e-mails are generated by Microsoft. Any ideas?

    Read the article

  • Remote Desktop fails after VPN connection.

    - by Samet Sorgut
    The remote computer is connected with Remote Desktop. When the remote computer is connected to VPN the Remote Destop freezes. It is not possible to connect to the remote computer again via Remote Desktop. What can be done to connect to this remote computer after it establishes a VPN connection? The only thing that comes to my mind is to install a second NIC and configure Remote Desktop to accept connection from this NIC while VPN is working from the other... What do you suggest?

    Read the article

  • Install GRUB to Ubuntu Partition

    - by Noel
    So my computer has the following partitions: /dev/sda -- (I know this isn't a real partition, but more so the boot loader) /dev/sda1 -- (Windows 7 Boot Loader) /dev/sda3 -- (Windows 7) /dev/sda4 -- (Data partition, NTFS) that means i have /dev/sda2 as free space. I do not want to change the MBR of the computer. I would like /dev/sda2 to contain GRUB AND Ubuntu. So ideally when I turn my computer on, BIOS would ask if I'd like to boot Windows 7 or Ubuntu(or Grub or partition 2), and I could choose either one. But I would like Grub and Ubuntu to be on the same partition, so they will not interfere in any way with windows or window's boot loader/partition (sda3) How can I do this? Catch: when formatting partitions, Ubuntu does not give me the option to make them virtual partitions, so that makes things harder. I tried: installing Ubuntu to /dev/sda2 (which I formatted as ext4) and then told the Ubuntu installer to install the bootloader to /dev/sda2. But when I select "Ubuntu" from BIOS's boot selection, it loads a black screen and says "invalid arch independent ELF magic grub rescue _" and allows me to input stuff. How can I fix this, or tell my computer where Grub is?

    Read the article

  • Export podcasts from iTunes as OPML, or some other way?

    - by Raftus
    I recently bought a new computer, and installed iTunes 9 on it, mainly to subscribe to podcasts. All my regular podcasts are saved as subscriptions in iTunes om my old computer. Is there any way to save myself entering in all the subscriptions individually on my new computer, by maybe exporting the podcast list as an OPML file, or otherwise saving that list out of iTunes?

    Read the article

  • How to unit test with lots of IO

    - by Eric
    I write Linux embedded software which closely integrates with hardware. My modules are such as : -CMOS video input with kernel driver (v4l2) -Hardware h264/mpeg4 encoders (texas instuments) -Audio Capture/Playback (alsa) -Network IO I'd like to have automated testing for those functionalities, such as integration testing. I am not sure how I can automate this process since most of the top level functionalities I face are IO bound. Sure, it is easy to test functions individually, but whole process checking means depending on tons of external dependencies only available at runtime.

    Read the article

  • RDP failing due to Audit Failure on the IPSec driver

    - by paulwhit
    I am trying to RDP into a Windows 7 Hyper-V image connected to a corporate network that publishes IPSec policies via Active Directory. I am seeing this error in the log: IPsec dropped an inbound clear text packet that should have been secured. If the remote computer is configured with a Request Outbound IPsec policy, this might be benign and expected. This can also be caused by the remote computer changing its IPsec policy without informing this computer. This could also be a spoofing attack attempt. Remote Network Address: XXX.XXX.XXX.XXX Inbound SA SPI: 0 How do I change my settings on the computer using RDP to something suitable for the domain-joined Hyper-V image?

    Read the article

  • Output to TV only works if monitor is plugged in

    - by Greg Sansom
    I am trying to use my TV as the sole output for a computer. The computer has a graphics card with 2 outputs - one RGB and one DVI. I have the RGB output going to the TV, and when the DVI output is connected to a monitor, display works fine on both the monitor and the TV. If I turn off the monitor, or even turn off power to the monitor, the TV continues to display the desktop. If I unplug the DVI cable from the monitor (remember that the monitor doesn't have any power at this point), the TV stops presenting the desktop and displays a "Not Accepted" message. When starting up the computer, the TV displays fine, but stops working at the "press ctrl-alt-delete" screen unless the monitor is connected. How can I make the TV show the display without the monitor? The TV is an LG RT-42PZ45V. The graphics card is an ATI Radeon series HD4350 512MB GDDR2. The computer is running Windows Server 2008 r2.

    Read the article

  • Permissions needed to read event log messages remotely?

    - by Neolisk
    When running under a limited account, local event log messages are displaying fine, for remote computer I am getting this error: The description for Event ID ( xxxxx ) in Source ( yyyyy ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: zzzzz. Same remote computer works fine under domain administrator. I am currently experimenting with just the Event Viewer, by using Run As. Original issue is a PowerShell script which does Get-EventLog. Are there any special permissions that need to be in place to able to read event log messages remotely? Supposedly there is a simple solution in Windows 2008 and higher, i.e. just add user to Event Log Readers group. Is there anything like that for Windows 2003?

    Read the article

  • Windows Server 2008 R2 DNS Server not working?

    - by wolfvilleian
    I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

    Read the article

  • SSH into Ubuntu Linux on a box without a static IP address

    - by Steven Xu
    Basically, how do I do it? I'd like to connect to my home computer from work, but my internet is routed through my apartment building's network, so I don't have the static IP address I'm accustomed to having. How do I go about accessing my home computer through SSH (I'll be using Putty at work if it matters) if my home computer doesn't have a static IP address?

    Read the article

  • OVERVIEW ORACLE SALES PLAYS

    - by michaela.seika(at)oracle.com
    As an EMEA VAD partner, please update your knowledge on Oracle's Hardware and Software Solutions. Please join us at one of the following WebConferences and sent us a short mail for your registration: Tuesday, 15. February 2011 Sales Play 1: Overview of the High Impact Sales Plays - SALES Thursday, 17. February 2011 Sales Play 2: High Impact Sales Plays - TECHNICAL Further information: Database Application Acceleration with Flash Storage  Oracle's Sun Hardware Solutions

    Read the article

  • Laptop overheating within minutes of start up

    - by Spik330
    I have a Dell Windows 7 Home Prem with an I7-720QM. More information on the computer can be found here http://www.dell.com/support/home/us/en/04/product-support/servicetag/51CVCN1/configuration The Problem I am having is the computer will over heat unnaturally fast. From the time it takes from boot to when i can run my diagnostic tools which takes about two minutes the cpu temp is 86c after a few more minutes the cpu temp will reach 100 and the computer will black screen shut down. In total the the laptop can only be run for 3-5 minutes before completely shutting off. During this time there is nothing extensive running. After the laptop shuts down you have to wait for it to cool down or it will shut off even faster sometimes 7-15 seconds well still in the boot screen. Does anyone know what could be the problem maybe a sensor or is the computer fried?

    Read the article

  • How can I find out if a port is opened or not?

    - by Roman
    I have installed Apache server on my Windows 7 computer. I was able to display the default index.php by typing http://localhost/ in the address line of my browser. However, I am still unable to see this page by typing IP address of my computer (neither locally (from the same computer) no globally (from another computer connected to the Internet)). I was told that I need to open port 80. I did it (in a way described here) but it did not solve the problem. First of all I would like to check which ports are opened and which are not. For example I am not sure that my port 80 was closed before I tried to open. I am also not sure that it is opened after I tried to open it. I tried to run a very simple web server written in Python. For that I used port 81 and it worked! And I did not try to open the port 81. So, it was opened by default. So, if 81 is opened by default, why 80 is not? Or it is? ADDITIONAL INFORMATION: 1. In my httpd.conf file I have "Listen 80". 2. This site tells me that port 80 on my computer is opened. 3. I get different responses if I try http://myip:80 and http://myip:81. In the last case browser (Chrome) writes me that link is broken. In the first case I get: Forbidden You don't have permission to access / on this server. 4. IE writes that "The website declined to show this webpage".

    Read the article

  • New to building computers worried about temps

    - by dave
    I'm new to building my own computers and I was wondering about maximum temperatures. I understand that the room temp can affect the computers temp but how relevent is it? I understand that if my room temp is 20°C none of my computer parts could be lower than that. But if my room is 27°C instead of 20°C would this cause my computers parts to heat up more/faster? My new computer I built myself for gaming is i7 2600k 16gb ram ddr3 1600 hd6970 2 gb 240gb ssd ( bought a nas with 3 2tb drives in raid 5 for my home network ) 850w modular psu I also have my old hp computer i3 2120 8gb ram hd6770 1tb hdd I also have 3 laptops in my household, but I am not worried about their temps, they heat up my legs but they are never under stress. Due to size and money reasons I used an old case and it only has one of the sides left on it. Is this bad for the computer and will the extra dust cause problems? Or should I leave it this way or take the missus wrath and buy a case? If so is there any certain case I should get? I don't care about looks I just want card reader and usb slots and for it to run as cool or cooler than now, my case has 1 fan. Also what are the max temps for my new and old computer parts? Is 40°C under load ok for my CPU, what about 70°C for my GPU is that ok too, or should I worry? What are normal and safe temps for my components? I have looked around but there seem to be lots of different answers. I know that 100°C is bad but I want my parts to last as long as possible and this site always seems to give good replies without arguing or flaming.

    Read the article

  • VLAN setup on my PC

    - by Surjya Narayana Padhi
    Hi Geeks, I am bit new to VLAN. I want my two computers communicate through VLAN. I have following queries. As I am new to it my queries may be somewhat vague in some points. But i would like to hear from experts for my basic queries. I have two PCs Computer A and Computer B in two different IP networks Network A and Network B Both my PC has windows OS installed. How to send a VLAN(#Number) tagged packet from Computer A to Computer B and how to detect and untag the packet at Computer B? (Please provide the steps for windows OS) For this action do I need to check if my ethernet card supports VLAN tagging/untagging? If yes how can I know if my card supports it or not? Is the VLAN applied for Wireless ethernet controllers also? Do I need any switch or router for this action? Experts please given your inputs so that I can have a strong basic. If anyone can give some inputs how i can detect those VLAN in wireshirk, it will be helpful me also. Thanks in advance.

    Read the article

  • How can I launch RemoteApp on Windows Server from server itself at startup

    - by Rusted
    I have Windows Server 2008 R2 with RDS and custom desktop (GUI) application installed on the server. The app is started as RemoteApp on server by user from his desktop computer (or, sometimes, he can work from notebook over VPN). Some details about environment: the server automatically shuts down every evening and automatically power-on every morning (this is a requirement) desktop application do some precalculations/precaching on startup and it can take lot of time mentioned application have some memory leaks, so I can't use hibernate instead of shutdown When user launching this app from his computer, he can't start work with it until this app finishes pre-initialization. Is there any way to start RemoteApp session at the server startup (without actual user logon), so that the user could connect to this session from his computer later? I don't want to involve the user's computer to make it work. I have tried to do it by Windows startup script, but have no luck - starting RDP session requires actual user session.

    Read the article

  • USB Adapter for Memory Cards

    - by ktm5124
    I am looking for something like a USB adapter for video cards. It is a cable that on one end hooks into a USB port on a computer and on the other accepts any one of a variety of video cards. Essentially it's an "all-in-one" USB adapter for video cards. I'm told that they are sold all over... does anyone know what it is called or where to find them? I should clarify, by the way, that by "video card" I mean a memory card for a video camera, and that the goal is to read this video data onto a computer, from a variety of video card types, through a USB port. That way if you go to your friend's house and bring your computer, you can transfer the video data on his video camera to your computer, trusting that the adapter will have a slot for his kind of video card.

    Read the article

  • GNOME changes to KDE on Maverick

    - by Pit
    Hi, I recently made a clean/fresh install of Ubuntu 10.10 an experienced the problem that the theme changes from Gnome to KDE and back randomly and partly. Sometimes after starting my computer I will have a KDE theme. If I then open the Appearance Preferences ( System - Preferences - Appearance ) some applications and the main-menu as well as menu of applications (only upper two centimetres of a application window) will change back to Gnome only by opening it, not changing anything nor saving. I did not choose KDE at any time, nor did I do any changes to the appearance prior to the first occurrence of this bug. On a second computer I updated from 10.04 to 10.10 and experienced the same bug. On this computer I did however change the layout of the minimize;maximise;close buttons by following How do I move the Window buttons from left to right?. But I don't see how this could provoke the bug, especially as it occurs on a second computer. Will doing updates I saw that there a quite a lot of KDE packages being downloaded. Do I even need those if I don't want to use KDE?

    Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >