Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 188/1008 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

  • Disable Cinnamon 2 lock screen?

    - by minerz029
    When my computer is locked, I am presented with the default Ubuntu lockscreen. When I enter my password and unlock it, I am presented with the Cinnamon 2 lock screen and I have to enter my password again. How can I disable the Cinnamon 2 lock screen? Note: I've installed Cinnamon 2 with these commands: sudo add-apt-repository ppa:gwendal-lebihan-dev/cinnamon-stable sudo apt-get update sudo apt-get install cinnamon

    Read the article

  • Does Huawei E398 LTE Modem works with Netgear Router?

    - by Paul Smith
    I've been using a Netgear router sharing the signal through my Huawei E160 dongle, but following the speeds update and the device limit, it does not satisfy the demand. Through research, I've found that Huawei E398 is the latest and functional dongle so far. I'm going to update, but the confusion comes: Is it compatible for my Netgear router? Will it work? Any information will be appreciated. I found the unlocked E398 here.

    Read the article

  • Laptop drains of quickly with battery

    - by Shyam
    I am a user since years in ubuntu and I have not come across this problem with ubuntu till date. My battery drains off immediately after I unplug my AC power. The options I tried: 1) checked the battery state with : cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: charged present rate: 0 mA remaining capacity: 392 mAh present voltage: 12476 mV Initially it was showing charging state: charging after 5mins it started displaying as charged. ! Based on that if I remove my AC Power it shows low battery notification. 2) When I run acpi : acpi -b Battery 0: Unknown, 9% The battery state shows as unknown. But initially when we plug-in to AC adapter acpi -b Battery 0: Charging, 9%, 13:04:00 until charged 3) When the check the same with : upower -i /org/freedesktop/UPower/devices/battery_BAT0 native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0A:00/power_supply/BAT0 vendor: HP power supply: yes updated: Thu Nov 1 16:06:40 2012 (20 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 4.2336 Wh energy-empty: 0 Wh energy-full: 33.1128 Wh energy-full-design: 33.1128 Wh energy-rate: 5.6052 W voltage: 12.474 V time to full: 5.2 hours percentage: 12.7854% capacity: 100% technology: lithium-ion Is the power stats output, It says 5hrs to charge completely, If I charge it even more than 5hrs and unplug the AC power, It again cribs stating LOW BATTERY !! The same thing does not happen with Windows7. Any suggestions/ help will be greatly appreciated.

    Read the article

  • "sudo cd ..." one-liner?

    - by j-g-faustus
    Occasionally I want to cd into a directory where my user does not have permission, so I resort to sudo. The obvious command sudo cd somedir doesn't work: $ sudo mkdir test $ sudo chmod go-rxw test $ ls -l drwx------ 2 root root [...snip...] test $ cd test -bash: cd: test: Permission denied $ sudo cd test sudo: cd: command not found Using sudo su works: $ sudo su # cd test Is it possible to make this into a one-liner? (Not a big deal, just idle curiosity :) The variations I tried didn't work: $ sudo "cd test" sudo: cd: command not found $ sudo -i cd test -bash: line 0: cd: test: No such file or directory $ sudo -s cd test The last one doesn't give an error, but it cd's within a new shell that exits by the end of the line, so it doesn't actually take me anywhere. Can someone enlighten me as to why this happens? Why is sudo cd not found, when for example sudo ls ... works fine?

    Read the article

  • Force apt to remove all emacs*

    - by wishi
    Hi! I have a bug-problem with the apt-packages of emacs: >>Error occurred processing debian-ispell.el: File error (("Opening input file" "no such file or directory" "/usr/share/emacs23/site-lisp/dictionaries-common/debian-ispell.el")) >>Error occurred processing ispell.el: File error (("Opening input file" "no such file or directory" "/usr/share/emacs23/site-lisp/dictionaries-common/ispell.el")) >>Error occurred processing flyspell.el: File error (("Opening input file" "no such file or directory" "/usr/share/emacs23/site-lisp/dictionaries-common/flyspell.el")) emacs-install: /usr/lib/emacsen-common/packages/install/dictionaries-common emacs23 failed at /usr/lib/emacsen-common/emacs-install line 28, <TSORT> line 30. dpkg: error processing emacs23-lucid (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of emacs: emacs depends on emacs23 | emacs23-lucid | emacs23-nox; however: Package emacs23 is not installed. Package emacs23-lucid which provides emacs23 is not configured yet. Package emacs23-nox which provides emacs23 is not installed. Package emacs23-lucid is not configured yet. Package emacs23-nox is not installed. dpkg: error processing emacs (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: emacs23-lucid emacs E: Sub-process /usr/bin/dpkg returned an error code (1) In fact I would be satisfied with just emacs23-nox, a couple of plugins - from apt. But I can neither --purge nor --purge reinstall, nor remove the packages. It always processes until this certain bug. I did some google-searching, found some stuff on Launchpad suggesting: sudo apt-get install --reinstall --purge emacsen-common But this is the same... so I hope there a way to tell app to just remove everything releated to emacs, and to start from scratch again? Thanks, Marius

    Read the article

  • Xfce gets really confused about session saving, etc

    - by Pointy
    I'm getting a new laptop running with 11.04 Ubuntu. I've got the xfce4 packages all installed, which is something I've had no problems with on any of my other machines. On this new laptop, however, though I can log in and use an xfce session without any problems, logging out of a session is problematic: I click the "Log out" widget from the panel and then "Log out" from its option dialog. Then the thing just sits there, not logging out. Subsequent attempts to open the "Log out" widget fail with an error about the session manager being busy. After maybe a minute or so, it logs out. Though I've got the "Save session" option checked in the log out dialog, xfce just makes a complete hash of the business. It does remember the applications that I had running, but it seems to forget about the window manager (!!) and the workspace configuration. I don't log in/out that often, and generally I don't care much about restarting applications, but the window manager being missing is of course pretty annoying. I like xfce because it's simple and unobtrusive and usually works pretty well. I've never experienced this, and I've got two other machines also running 11.04 with pretty much the same setup (straight Ubuntu install with xfce4 packages added). Is there some good way to diagnose stuff like that? edit — well I nuked my session cache, did an explicit save from the session widget, and now it works. Well, it doesn't save the workspace location for each client and instead opens them all up on the first workspace, but I think that may be because, in the session, xfwm4 is the last thing in the "Client" list, so before it's started all the other clients just pile up in the first (and only) workspace. I'm still curious about how exactly it gets so messed up. I certainly wasn't knowingly attempting anything fancy or unorthodox, though I may have done something fishy inadvertently.

    Read the article

  • "Cannot import name genshi" error when installing the Swab library

    - by ATMathew
    I'm trying to install the Swab library for Python 2.6 in Ubuntu 10.10. However, I get the following error messages when I try to import it. In the terminal I ran: sudo easy_install swab sudo easy_install Genshi In the Python interpreter I ran: >>> import swab Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/local/lib/python2.6/dist-packages/swab-0.1.2-py2.6.egg/swab/__init__.py", line 23, in <module> from pestotools.genshi import genshi, render_docstring ImportError: cannot import name genshi I don't know whats going on. can anyone help.

    Read the article

  • Ubuntu 14.04, only wallpaper and a mouse cursor is showing

    - by Abhishek Verma
    I upgraded to Ubuntu 14.04 weeks ago, that was a fresh install. And as usual installed, Unity tweak tool, some themes, Chrome, eclipse etc. Today, while playing with Unity tweak tool, I mistakenly switched Window spread to off, and bang, no problem yet. After realizing what I did I switched it to on again and then, the title bar of all windows, the status bar (guessing it's called that), and the launcher disappeared. Now I was left with a mouse cursor and the Unity tweak tool window, without the title bar. I thought a restart is needed, but sadly no shutdown option to click on, moreover, the keyboard didn't worked, neither the hardware shutdown button. So, I pressed the reset button. After a mundane restart, I was welcomed by the wallpaper and the mouse cursor, moving, that's it. Searched everywhere for a working solution, found some solutions in AskUbuntu itself, but they where all old and required terminal to be used, but since my keyboard isn't working, no access to the terminal. So, ofcource the question isn't a dublicate, at least, IMHO. Also, I was working on an Android project and have got no backups, so I won't be going for a clean install, or else I will start crying watching my weeks of work being deleted, any solutions, please.

    Read the article

  • Is this an apt-get issue or network issue?

    - by zharvey
    I just installed my first Ubuntu server (12.04) instance and immediately am noticing a few things: Running apt-get install or update fails (see below) Running ifconfig produces peculiar IP addresses starting with 10.x.x.x and my router does not see the server at all in its "Attached Devices" page (its a consumer grade Netgear) When I run apt-get I get 50+ of the following errors: Failed to fetch <some-http-url. Temporary failure resolving <blah.ubuntu.com I read up on this error for 12.04, and found some similar posts on this forum and on serverfault that recommended going into /etc/resolv.conf and adding an entry: nameserver 8.8.8.8 To my surprise, I found that /etc/resolve.conf was a symlink pointing to somewhere else and I had to delete it first, then create a new one with the entry indicated above. I restarted the server and tried running apt-get again: same results. How do I start diagnosing the problem (I'm a relatively new Linux/Ubuntu user)? Additional details that may help: This is actually a virtual machine running as a VirtualBox guest OS The physical host that is running this VM is my laptop which has a wireless connection; I'm wondering if (somehow) the laptop is getting the network wirelessly, but perhaps either the VBox VM and/or the Ubuntu server OS isn't configured for wireless and so nothing is "getting through"? Thanks in advance for any pointers! Edit: Here is a snapshot of my VM's Network settings (only Adapter 1 has any information populating its fields, so I assume my VM has only 1 adapter): Here is the output when I run ifconfig from the terminal: And here is the output when I run route from the terminal: Running ping google.com:

    Read the article

  • How can I find and remove 6to4 from my system?

    - by Kelley
    Last week I installed Miredo and configured my system to handle IPv6 through 6to4 tunneling. It was easy and it worked well. So I decided I'd give Hurricane Electric's IPv6 connection a try. I've had a lot to learn, and I thought I had it all running (with a great deal of help from a very patient person at Hurricane: my LinkSys E3200 didn't like IPv6). But now, when all should be good, after I uninstalled Miredo and Teredo and whatever else, I find that there is "6to4 tunneling - another automatic tunneling," which I need to remove from my box. But I have no idea where or what it might be. Connected to my computer are a couple printers, an external hard drive, and a router (which has no settings for IPv6). All of these are, I think, innocent in this matter. So, how can I get rid of 6to4 tunneling, when I don't even know where it is? Is there someplace to look and find out what's going on? I'm pretty new to Linux and Ubuntu.

    Read the article

  • Ubuntu 11.10 doesn't detect Intel integrated graphics (i7-2670QM CPU)

    - by Telmo Marques
    The laptop I'm using is an MSI GT683DX-847PT that comes with an NVIDIA GeForce GTX570M discrete GPU, and an Intel Core i7-2670QM CPU. According to Intel's description of the Core i7-2670QM CPU, it has an HD Graphics 3000 integrated GPU. The problem is that the Intel integrated graphics GPU doesn't come up in lspci nor in lshw, only the NVIDIA GPU shows up. Here is the output of both commands: sudo lspci: http://pastebin.com/raw.php?i=9AZg8bJy sudo lshw: http://pastebin.com/raw.php?i=6cAMFQsY I was counting on having two GPU's to run CUDA programs on the discrete NVIDIA GPU, while X was handled by the integrated Intel GPU, to prevent kernel execution timeout. Why doesn't the Intel HD Graphics 3000 GPU show up? Any tests I could make to verify the presence of an integrated GPU?

    Read the article

  • Prevent nautilus showing partition mounted in bash script

    - by bcbc
    In my bash script I mount partitions, check them, copy files to them, and unmount. When the script mounts the partition, Nautilus pops up with a Window showing the partition and stealing focus. This is something I want to avoid. Note: I know I can change the behaviour of this in System settings, Details, Removable media, Never prompt or start programs on media insertion, but I don't want to change the behaviour e.g. if a USB stick is plugged in, I just want to prevent it in my bash script. Actually this auto display doesn't seem consistent. If I do the exact same command from the terminal, Nautilus doesn't show, and I know there are other mounts in my script that don't show. So what could be causing this? Here's an example of the code: mkdir -p $target/home mount $target/home $homedev Thanks in advance

    Read the article

  • How to reset display settings in XFCE \ Ubuntu 12.04 and also flgrx drivers

    - by Agent24
    I recently upgraded to Ubuntu 12.04 and since I hate unity I installed the Xubuntu package and am using XFCE instead. Since I have a Radeon HD5770 I also installed the fglrx drivers. This all went fine (aside from the fact that the post-release update fglrx drivers have an error on installation and Ubuntu thinks they're not installed when they actually are. I configured my display settings (dual monitors, a 17" CRT on VGA and a 17" LCD on DVI) in the amdcccle program and everything was perfect. THEN, 2 days ago, I accidentally clicked on the "Display" settings in XFCE "settings" manager. After that, everything got screwed. Now, I normally run the CRT at 1152x854 and the LCD at 1280x1024 with the CRT as my primary monitor (with panel) and the LCD without panels etc just to display other windows when I want to drag them over there. The problem is now that if I set my CRT to 1152x864, it stays at 1280x1024 virtually and half the stuff falls off the screen. It also puts the LCD at 1280x1024 BUT then overlays the CRT's display ontop with different wallpaper in an L shape down the right-hand and bottom edges. In short, nothing makes sense and everything is FUBAR. I tried uninstalling fglrx through synaptic, and renaming xorg.conf and also the xfce XML file that has monitor settings but it still won't make sense. Unity on the other hand can currently set everything normally so the problem appears to be only with XFCE. In any case, I can't even get the fglrx drivers back, when I re-installed them, I can't run amdccle anymore as it says the driver isn't installed!! Can someone help me reset my XFCE settings so the monitors aren't screwed with some incorrect virtual desktop size and also so I can get fglrx drivers back and working? I really don't want to have to format and reinstall and go through all the hassle but it looks like I may have to :(

    Read the article

  • How do I know if my system is capable of playing 24bit/96kHz sound?

    - by Igor Zinov'yev
    Let me state for the record that I'm a total noob when it comes to Hi-Fi sound systems, but I am rather picky about the sound quality. Normally I listen to CD recordings ripped to FLAC in 16/44, but I have several albums that are also ripped from vinyls to FLAC in 24/96. But it seems that I can't tell the difference between 16-bit and 24-bit versions (except for some vinyl noises, of course). That can be due to several reasons: my equipment (onboard audio, monitor headphones) isn't good enough to make any difference, my system is not playing audio in 24-bit 96 kHz, I am physically unable to hear the difference. So here is my question, how do I tell if my system can play 24-bit sound with 96 or 192 kHz resolution? And if it can, how do I tell that it plays it instead of downsampling to 16-bit / 44 kHz? Also, what hardware (audio cards, amplifiers, etc.) would you recommend to play such recordings on Ubuntu?

    Read the article

  • How to convert rmvb to mp4? (or, why ffmpeg doesn't work?)

    - by Tom Brito
    Hi, I'm trying to use this script to convert an rmvb video to mp4, but I'm having problems with the ffmpeg. In apt-get there's only ffmpeg0 and ffmpeg-dev, I installed both, but the script doesn't work, it's saying that ffmpeg was not found. Any hint on this? --update The script I'm talking about: #!/bin/bash tipo=$1 arqv=$2 resolucao=$3 tipoarq=$4 help() { clear echo "Convertor de Vídeos para MP4" echo "Parametro 1 = Tipo: (A - Arquivo/D - Diretório)" echo "Parametro 2 = Arquivo/Caminho" echo "Parametro 3 = Resolução" echo "Parametro 4 = Tipo de Arquivos de Entrada (rmvb, avi, mpeg)" } if [ "$tipo" = "" -o "$arqv" = "" -o "$resolucao" = "" -o "$tipoarq" = "" ]; then help; exit fi if [ "$tipo" = "D" ]; then count=`ls "$arqv"/*.$tipoarq | wc -l` else count=1 fi echo "$count arquivos encontrados para converter." x=0 while [ ! $x -ge $count ]; do x=`echo $x + 1 | bc` if [ "$tipo" = "D" ]; then nome=`ls "$arqv"/*.$tipoarq | head -n $x | tail -n 1` else nome=$arqv fi echo "Convertendo $nome ..." ffmpeg -i "$nome" -acodec libfaac -ab 128kb -vcodec mpeg4 -b 1200kb -mbd 2 -cmp 2 -subcmp 2 -s $resolucao "`echo $nome | sed "s/\.$tipoarq//g"`".mp4 done exit --update Using WinFF it gives: Unknown encoder 'libx264' I've installed both the existing packages libx264-67 and libx264-dev, but none solved. Looking for more alternatives...

    Read the article

  • Missing Operating System after trying to upgrade to Ubuntu 11

    - by Mauricio
    there! After trying to upgrade from Ubuntu 10.04 to 11, the upgrading process stopped when running and then I got an "out of disk, grub rescue" message when booting. After running Boot Repair, I got this results. Now I get "Missing Operating System" whent trying to boot. Bellow I show some results from some commands I gather from help foruns, but I still reached no solution. Could you please help me? Any enlightment will be very helpful! Disk Utility says "Disk has a few bad sectors". When trying to run the Self-test I get "FAILED (Read)" Here we have what Gparted says about the /dev/sda1 partition (ext4): Flags: boot Status: not mounted Warning: e2label: Attempt to read block from filesystem resulted in short read while trying to open /dev/sda1Couldn`t find valid filesystem superblockUnable to read the contents of this filesystem! From sudo fdisk -lI got: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x000e0596 Device Boot Start End Blocks Id System/dev/sda1 * 2048 607428607 303713280 83 Linux/dev/sda2 607430654 625141759 8855553 5 Extended/dev/sda5 607430656 625141759 8855552 82 Linux swap / SolarisDisk /dev/sdb: 320.1 GB, 320072933376 bytes255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c3c41 Device Boot Start End Blocks Id System /dev/sdb1 * 63 625137344 312568641 c W95 FAT32 (LBA) " and fromsudo fdisk /dev/sda1I got fdisk: unable to read /dev/sda1: Inappropriate ioctl for device` From sudo mount /dev/sda1 /mntI got: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so From sudo update-grubI got: error: cannot read from `/dev/sda'. /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?).

    Read the article

  • Change ra0 to wlan0 in ubuntu 10.10

    - by spambas
    I am trying to find a way to change the name of my Ralink interface to the usual wlan0. The application I use is looking for this interface but since we changed our wifi adapter form Intel to ralink we miss the wlan0 because Ralink uses ra0 instead. On all the forums and blogs I read that you need to change that in /etc/sysconfig/network-scripts/ifcfg-ra0. Ubuntu unfortunately does not have a /etc/sysconfig folder.

    Read the article

  • Can't install Ubuntu on my Windows 7 laptop

    - by Ana
    I tried installing Ubuntu in two different ways: First, I tried the Windows Installer, and it goes well until I reboot the system and, when booting on Ubuntu, I get the error: No root file system defined. Second, I uninstalled wubi by going to to Control Panel - Uninstall Programs - Ubuntu. Then, I booted the laptop from the live CD and selected install. It boots okay but in the screen right after the one that says to make sure you have 4.5 GB available, Internet connection, etc, when I click continue it throws me a message saying that Ubuntu had an internal error and asks me if I want to report the error. After that, I just have a black screen and nothing else! No Ubuntu installed, no boot option to go back to Windows. Nothing! My goal is to install Ubuntu alongside Windows 7 (without the hassle of formatting the computer, creating partition, etc). How can I do it (preferable using Windows Installer)? How can I solve the "No root file system defined" that I encountered when I used the Windows Installer?

    Read the article

  • Building ATLAS (and later Octave w/ ATLAS)

    - by David Parks
    I'm trying to set up ATLAS (so I can later compile octave with ATLAS support). If I'm correct, I still need to build this manually due to the environment specific optimizations. I do see a package for ATLAS, but it looks like it's using the cross platform generic build options (e.g. "it'll be slow"). So, running the configure script as described in the docs seems to go poorly. As a java developer I never do well at making heads or tails of errors in these build processes. Am I missing dependencies (if so is there any documentation on what I need)? allusers@vbubuntu:~/Downloads/atlas3.10.1/build_vbubuntu$ ../configure -b 64 -D c -DPentiumCPS=3000 --with-netlib-lapack-tarfile=/home/allusers/Downloads/lapack-3.5.0.tgz make: `xconfig' is up to date. ./xconfig -d s /home/allusers/Downloads/atlas3.10.1/build_vbubuntu/../ -d b /home/allusers/Downloads/atlas3.10.1/build_vbubuntu -b 64 -D c -DPentiumCPS=3000 -Si lapackref 1 OS configured as Linux (1) Assembly configured as GAS_x8664 (2) Vector ISA Extension configured as SSE3 (6,448) ERROR: enum fam=3, chip=2, mach=0 make[3]: *** [atlas_run] Error 44 make[2]: *** [IRunArchInfo_x86] Error 2 Architecture configured as Corei1 (25) ERROR: enum fam=3, chip=2, mach=0 make[3]: *** [atlas_run] Error 44 make[2]: *** [IRunArchInfo_x86] Error 2 Clock rate configured as 2350Mhz ERROR: enum fam=3, chip=2, mach=0 make[3]: *** [atlas_run] Error 44 make[2]: *** [IRunArchInfo_x86] Error 2 Maximum number of threads configured as 4 Parallel make command configured as '$(MAKE) -j 4' ERROR: enum fam=3, chip=2, mach=0 make[3]: *** [atlas_run] Error 44 make[2]: *** [IRunArchInfo_x86] Error 2 Cannot detect CPU throttling. rm -f config1.out make atlas_run atldir=/home/allusers/Downloads/atlas3.10.1/build_vbubuntu exe=xprobe_comp redir=config1.out \ args="-v 0 -o atlconf.txt -O 1 -A 25 -Si nof77 0 -V 448 -b 64 -d b /home/allusers/Downloads/atlas3.10.1/build_vbubuntu" make[1]: Entering directory `/home/allusers/Downloads/atlas3.10.1/build_vbubuntu' cd /home/allusers/Downloads/atlas3.10.1/build_vbubuntu ; ./xprobe_comp -v 0 -o atlconf.txt -O 1 -A 25 -Si nof77 0 -V 448 -b 64 -d b /home/allusers/Downloads/atlas3.10.1/build_vbubuntu > config1.out make[2]: gfortran: Command not found make[2]: *** [IRunF77Comp] Error 127 make[2]: g77: Command not found make[2]: *** [IRunF77Comp] Error 127 make[2]: f77: Command not found make[2]: *** [IRunF77Comp] Error 127 Unable to find usable compiler for F77; abortingMake sure compilers are in your path, and specify good compilers to configure (see INSTALL.txt or 'configure --help' for details)make[1]: *** [atlas_run] Error 8 make[1]: Leaving directory `/home/allusers/Downloads/atlas3.10.1/build_vbubuntu' make: *** [IRun_comp] Error 2 ERROR 512 IN SYSCMND: 'make IRun_comp args="-v 0 -o atlconf.txt -O 1 -A 25 -Si nof77 0 -V 448 -b 64"' mkdir src bin tune interfaces mkdir: cannot create directory ‘src’: File exists mkdir: cannot create directory ‘bin’: File exists mkdir: cannot create directory ‘tune’: File exists mkdir: cannot create directory ‘interfaces’: File exists make: *** [make_subdirs] Error 1 make -f Make.top startup make[1]: Entering directory `/home/allusers/Downloads/atlas3.10.1/build_vbubuntu' Make.top:1: Make.inc: No such file or directory Make.top:325: warning: overriding commands for target `/AtlasTest' Make.top:76: warning: ignoring old commands for target `/AtlasTest' make[1]: *** No rule to make target `Make.inc'. Stop. make[1]: Leaving directory `/home/allusers/Downloads/atlas3.10.1/build_vbubuntu' make: *** [startup] Error 2 mv: cannot move ‘lapack-3.5.0’ to ‘../reference/lapack-3.5.0’: Directory not empty mv: cannot stat ‘lib/Makefile’: No such file or directory ../configure: 450: ../configure: cannot create lib/Makefile: Directory nonexistent ../configure: 451: ../configure: cannot create lib/Makefile: Directory nonexistent ../configure: 452: ../configure: cannot create lib/Makefile: Directory nonexistent ../configure: 453: ../configure: cannot create lib/Makefile: Directory nonexistent ../configure: 509: ../configure: cannot create lib/Makefile: Directory nonexistent DONE configure

    Read the article

  • Why can't I connect to a Cisco wireless access point?

    - by spinlock
    I'm running a Lucid Netbook Remix on my Dell Inspiron 600m and I was not able to connect to the wireless network at the Hacker Dojo in Mountain View yesterday. There were plenty of other people on the network - MS, Mac, and Linux boxes - but my laptop would never get an ip address. I can connect to my home network, which is open, and I've never had a problem connecting at the coffee shop, which uses WPA. The Hacker Dojo is running WPA and we checked the password a number of times but got no love. Any ideas would be greatly appreciated. Additional Info: $iwlist eth1 scan eth1 Scan completed : Cell 01 - Address: EC:C8:82:FA:63:92 ESSID:"HackerDojo-gwifi" Protocol:IEEE 802.11g Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:62 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 280ms ago Cell 02 - Address: 00:18:4D:24:08:61 ESSID:"Green Zone" Protocol:IEEE 802.11bg Mode:Master Frequency:2.417 GHz (Channel 2) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:23 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 11516ms ago Cell 03 - Address: 08:17:35:32:6E:13 ESSID:"\x00" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:71 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 2760ms ago Cell 04 - Address: EC:C8:82:FA:63:90 ESSID:"HackerDojo" Protocol:IEEE 802.11g Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:61 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 772ms ago Cell 05 - Address: 08:17:35:32:6E:11 ESSID:"HackerDojo-Presenter" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:65 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 3308ms ago Cell 06 - Address: 08:17:35:32:7E:31 ESSID:"HackerDojo-Presenter" Protocol:IEEE 802.11g Mode:Master Frequency:2.462 GHz (Channel 11) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:88 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 1668ms ago Cell 07 - Address: 38:E7:D8:01:46:1E ESSID:"JWS_Incredible" Protocol:IEEE 802.11bg Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 500 kb/s; 54 Mb/s Quality:31 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Extra: Last beacon: 2848ms ago Cell 08 - Address: 08:17:35:32:6E:10 ESSID:"HackerDojo" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:67 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 7848ms ago Cell 09 - Address: 08:17:35:32:7E:30 ESSID:"HackerDojo" Protocol:IEEE 802.11g Mode:Master Frequency:2.462 GHz (Channel 11) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:85 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 8300ms ago Cell 10 - Address: 08:17:35:32:6E:12 ESSID:"HackerDojo-gwifi" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:68 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 232ms ago Cell 11 - Address: 08:17:35:32:7E:32 ESSID:"HackerDojo-gwifi" Protocol:IEEE 802.11g Mode:Master Frequency:2.462 GHz (Channel 11) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:86 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 168ms ago Cell 12 - Address: EC:C8:82:FA:63:91 ESSID:"HackerDojo-Presenter" Protocol:IEEE 802.11g Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:62 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 7408ms ago $iwconfig eth1 eth1 unassociated ESSID:"HackerDojo-gwifi" Nickname:"ipw2100" Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:16 dBm Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

    Read the article

  • U1 music mp3 files not put into albums

    - by david
    Via the web page I can see that my files sync to U1 cloud servers. For the mp3 files, there seems to be a problem that several questions have already addressed but there does not seem to be a clear answer. If I use EasyTAG 2.1.6, I can see the ID3 tags on the local files and they seem to correctly define the artist, album title and track name. I expect it is not relevant, but I am using 10.04 with several different clients to rip the CDs. However, some mp3 files do not appear in the cloud at all and some others get assigned to Various Artist or Unknown artist. Does the music streaming (e.g. via Ipad) use the tags or the directory/file structure to assign the artist or album, and how quickly should it be expected to work? :-) Which version of ID3 tags does U1 music streaming work best with or prefer? thanks for any help David

    Read the article

  • Bash script using eyeD3 to remove extra tags from mp3 files

    - by jaguare22
    I found what looks like the perfect script for this but getting errors. Hoping someone can see problem. I am running 12.04 Server. Error is - awk: line 0: regular expression compile failed (missing '(') ): awk: line 0: regular expression compile failed (missing '(') ) The following tags have been found in the mp3s: These tags are to be stripped: Here is a the script obtained from savvyadmin !/bin/bash Script name: strip-tags.sh Original Author: Ian of DarkStarShout Blog Site: http://darkstarshout.blogspot.com/ Options slightly modified to liking of SavvyAdmin.com oktags="TALB APIC TCON TPE1 TPE2 TPE3 TIT2 TRCK TYER TCOM TPOS" indexfile=mktemp Determine tags present: find . -iname "*.mp3" -exec eyeD3 --no-color -v {} \; $indexfile tagspresent=sort -u $indexfile | awk -F\): '/^<.*$/ {print $1}' \ | uniq | awk -F\)\> '{print $1}' | awk -F\( '{print $(NF)}' \ | awk 'BEGIN {ORS=" "} {print $0}' rm $indexfile Determine tags to strip: tostrip=echo -n $tagspresent $oktags $oktags \ | awk 'BEGIN {RS=" "; ORS="\n"} {print $0}' | sort | uniq -u \ | awk 'BEGIN {ORS=" "} {print $0}' Confirm action: echo echo The following tags have been found in the mp3s: echo $tagspresent echo These tags are to be stripped: echo $tostrip echo echo -n Press enter to confirm, or Ctrl+C to cancel... read dummy Strip 'em stripstring=echo $tostrip \ | awk 'BEGIN {FS="\n"; RS=" "} {print "--set-text-frame=" $1 ": "}' First pass copies any v1.x tags to v2.3 and strips unwanted tag data. Second pass removes v1.x tags, since I don't like to use them. Without --no-tagging-time-frame, a new unwanted tag is added. :-) find . -iname "*.mp3" \ -exec eyeD3 --to-v2.3 --no-tagging-time-frame $stripstring {} \; \ -exec eyeD3 --remove-v1 --no-tagging-time-frame {} \; echo "Script complete!"

    Read the article

  • What package do I need to build a Qt 5 & CMake application?

    - by Kevin Reid
    I'm trying to build sdrangelove, which wants Qt 5 and uses CMake for its build system, on Ubuntu 13.10. What package do I need to install to give it the file it's asking for here? There are a lot of *qt5* packages, and I've tried installing the promising looking ones to no effect. All the discussions I've found either have things working fine or are talking about writing CMake build rules rather than executing them. I don't have a lot of experience with the organization of Debian/Ubuntu packaging. CMake Error at CMakeLists.txt:14 (find_package): By not providing "FindQt5Core.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "Qt5Core", but CMake did not find one. Could not find a package configuration file provided by "Qt5Core" (requested version 5.0) with any of the following names: Qt5CoreConfig.cmake qt5core-config.cmake Add the installation prefix of "Qt5Core" to CMAKE_PREFIX_PATH or set "Qt5Core_DIR" to a directory containing one of the above files. If "Qt5Core" provides a separate development package or SDK, be sure it has been installed.

    Read the article

  • adobe flash not working firefox or chromium

    - by user215216
    I'm new to ubuntu but I think I did everything right. Adobe flash says its installed and I've uploaded the latest Firefox and Chromium. When I go to youtube all I see is a black screen where the video should be and no image, Same in chromium, but at least chromium says it can't load plugin. Have tried various fixes on this web site but to no avail. Have to be doing something wrong or missing some step while quietly going crazy. Can someone please help me?

    Read the article

  • Automatically select headphones when plugged in

    - by Joachim Pileborg
    When I plug headphones into my desktop computer, they are not automatically selected for output, instead all sound still goes through my S/PDIF output to the stereo. The headphones alternative is added in the sound settings, and I have to manually select it as output device. $ cat /proc/asound/pcm 00-00: ALC898 Analog : ALC898 Analog : playback 1 : capture 1 00-01: ALC898 Digital : ALC898 Digital : playback 1 00-02: ALC898 Analog : ALC898 Analog : capture 2 I have done a Google search, as well as search askubuntu.com, but none of the answers in the hits I found seems to help. Also, after listening with the headphones and then unplug them, the previous output is not automatically selected, so I have no sound at all then. I have to manually select the correct output in the settings.

    Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >