Search Results

Search found 9273 results on 371 pages for 'boot repair'.

Page 189/371 | < Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >

  • Vista locks up after ~10h. of activity

    - by Naomi
    Hi everybody, I am experiencing a problem: Windows Vista completely freezes/locks up lately... It happened today twice - the mouse and keyboard stopped responding and I had to re-boot. I checked the Application Events Log and I see these two errors: Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. and then The following boot-start or system-start driver(s) failed to load: SASDIFSV SASKUTIL I checked Help online and it points to http://technet.microsoft.com/en-us/library/cc756390%28WS.10%29.aspx and suggests Updating the drivers. I'm not sure why would I have problem with drivers and if so, how can I find out which drivers to update? Can you please help me? Thanks in advance.

    Read the article

  • Toshiba Satellite L630 broken after bios update

    - by Mustafa Kamal
    I have Toshiba Satellite L630, which has been broken. It had no more OS installed in it. All the disk partition were cleared into one single empty unformatted partition. So I begin to install windows XP on this laptop. Apparently, win XP's driver support for this laptop is very limited. So I have to find almost all important driver (display, sound, etherned, wireless etc) on the net and install it manually one by one. So I start googling, and I got some driver download page from several Toshiba's website (the global version, the europe, asia, etc). Pretty hard to find the exact drivers, but I managed to find pretty good drivers. It's all works quite fine, although still have a few glitches. But everything turned into a big mess when I downloaded the "BIOS Update", which is also listed on Toshiba's official driver directory site. When I installed it, it show a big red warning sign telling me not to do anything while flashing the BIOS . I follow that instruction prudently. The process was finished, and that update BIOS software (it is InsydeH2O BIOS) told me that the BIOS has been succesfully updated and the computer need to restart. So I restart the computer. This is where the problem appear. I can no longer boot to my laptop. The booting process seems to be able to enter windows for a moment (it shows the windows XP loading screen), and then suddenly it just got that hateful blue screen and then instantiy restarts the machine. It goes on a loop. Boot bios - enter XP - blue screen - restart. I can't even try to reinstall my win XP again. Evertime the machine tries to boot to win XP CD, it got the same blue screen as I gets when loading from HDD. Many google search results said that I should open the laptop cover and try to clear CMOS with some kind of jumper or something. Or to unplug/re-plug the CMOS battery. Do I really need to do that? Is there anyway I could do without disassembling my laptop? I read some tricks about booting from USB device but I can't get the exat tools that I need to do that thing... Btw, this is my detailed laptop number photographed from the back of my laptop

    Read the article

  • Ubuntu 12 Server messing up my hard disk

    - by Jeroen Jacobs
    I'm installing Ubuntu server on a disk with 12GB available. During the setup, I choose the default LVM-based partition layout. However for some reason, Ubuntu decides that it only wants to use 4GB of this disk. How do I reclaim the remaining space of the hard disk? "lvextent" doesn't work btw... output of df -h: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 4.3G 3.4G 754M 82% / udev 3.9G 4.0K 3.9G 1% /dev tmpfs 1.6G 756K 1.6G 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 0 3.9G 0% /run/shm /dev/sda1 228M 25M 192M 12% /boot output of pvdisplay: --- Physical volume --- PV Name /dev/sda5 VG Name ubuntu PV Size 12.32 GiB / not usable 2.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 3154 Free PE 8 Allocated PE 3146 PV UUID dD06RZ-kGcL-1tTX-Ruds-XIDG-ssMd-FIUkzZ my partitions: Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 26343423 12920833 5 Extended /dev/sda5 501760 26343423 12920832 8e Linux LVM when I try lvextent, it says there is not enough diskspace.

    Read the article

  • Resealing windows XP stops PXE working

    - by zeocrash
    I'm trying to capture a drive image of a windows xp pro machine. I've gone through the steps and resealed the machine. When i try and network boot the PXE instantly gives the message "PXE-MOF" and ends. I have managed to get network boot to work on this machine whenever XP is not resealed. I have tried Multiple times to get PXE to work after resealing windows, but with no luck. As soon as i unseal it, PXE works every time. I know PXE is supposed to work independent of what's on the hard drive. Is there any way that resealing windows could cause PXE to stop working.

    Read the article

  • How to execute a shell script on startup?

    - by vijay.shad
    I have create a script to start a server(my first question). Now I want it to run on the system boot and start the defined server. What should I do to get this done? My findings tell me put this file in /etc/init.d location and it will execute when the system will boot. But I am not able to understand how the first argument on the startup will be start? Is this predefined somewhere to use start as $1? If I want to have a case startall that will start all the servers in the script, then what are the options I can manage. My Script is like this: #!/bin/bash case "$1" in start) start ;; stop) stop ;; restart) $0 stop $0 start ;; *) echo "usage: $0 (start|stop|restart)" ;; esac

    Read the article

  • Mac OS X kernel panic after TM restore

    - by Sev
    I changed my HD in my MacBook Pro, and restored from Time Machine backup. Now I keep getting kernel panic error everytime I restart. I booted from the DVD and ran a few tests, noticed that HD and RAM are being detected, also did a repair on the disk through disk utility, still getting same error. Any suggestions?

    Read the article

  • Linux not picking up new partition correctly on emc pseudo device

    - by James
    Hi We have a database server running oracle rac. We were recently running out of space on the main LUN that it is attached to. I created a new 100GB LUN and concatenated this onto the existing LUN creating a new MetaLUN. After some messing I managed to get linux to recognise the new space. I then created a new partition in on the pseudo device, to use the new space. Previously when I have done this on other system the next step is to create an ASM disk on the new partition and add this disk to the oracle disk group. This however fails. I am aware of various issues with ASM and powerpath, but I don't think this is the issue here. As on while investigating the issue I discovered that one of the underlying logical device is not reflecting the size change. See below; Powermt displays all of the underlying logical units [root@XXXXX~]# powermt display dev=emcpowerd Pseudo name=emcpowerd CLARiiON ID=CKM00091500009 [VFRAC2] Logical device ID=6006016030312200787502866C65DE11 [LUN 30] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP A, current=SP A Array failover mode: 1 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 3 qla2xxx sde SP A0 active alive 0 0 3 qla2xxx sdj SP B0 active alive 0 0 4 qla2xxx sdo SP A1 active alive 0 0 4 qla2xxx sdt SP B1 active alive 0 0 Fdisk on the pseudo device shows correct space. [root@XXXXX ~]# fdisk -l /dev/emcpowerd Disk /dev/emcpowerd: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/emcpowerd1 1 39162 314568733+ 83 Linux /dev/emcpowerd2 39163 52216 104856255 83 Linux fdisk on one of the logical units is wrong [root@XXXXX~]# fdisk -l /dev/sde Disk /dev/sde: 322.1 GB, 322122547200 bytes 255 heads, 63 sectors/track, 39162 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sde1 1 39162 314568733+ 83 Linux /dev/sde2 39163 52216 104856255 83 Linux fdisk on the rest of the units is fine [root@XXXXX ~]# fdisk -l /dev/sdj Disk /dev/sdj: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdj1 1 39162 314568733+ 83 Linux /dev/sdj2 39163 52216 104856255 83 Linux Also when I created the the partition linux did not create the any entries in the /dev directory for the second partition so I created these manually [root@XXXXX dev]# mknod sde2 b 8 66 [root@XXXXX dev]# ls -al sd[ejot]? brw-r----- 1 root disk 8, 65 Dec 29 14:20 sde1 brw-r--r-- 1 root disk 8, 66 Apr 8 20:31 sde2 brw-r----- 1 root disk 8, 145 Dec 29 14:19 sdj1 brw-r--r-- 1 root disk 8, 146 Apr 8 20:33 sdj2 brw-r----- 1 root disk 8, 225 Apr 6 23:12 sdo1 brw-r--r-- 1 root disk 8, 226 Apr 8 20:33 sdo2 brw-r----- 1 root disk 65, 49 Dec 29 14:19 sdt1 brw-r--r-- 1 root disk 65, 50 Apr 8 20:33 sdt2 This is a production server that we cannot easily reboot. Any ideas would be much appreciated. J

    Read the article

  • Windows 7 x64 how to verify integrity of ALL files on an NTFS disk?

    - by kilves76
    Looking for a tool that would verify integrity of ALL files on a Windows 7 x64 NTFS disk reliably? This is for testing of experimental defrag software, so it really needs to be secure and foolproof. I know it will take a long time, there's millions of files on the disk, but safety just cannot be compromised in a situation like this. Freeware solution much preferred. Can be either Windows software (=inducing pitfalls about files changing due to booting Windows) or a stand alone boot (for example linux boot cd + usb key for storing chksum/metadata).

    Read the article

  • systemctl enable differs from systemctl start, how?

    - by rudi_visser
    I am running an Arch Linux (latest, up-to-date) box, and attempting to get MySQL to start at boot. With the systemd package installed I have systemctl available, and as such I can do things like this: systemctl start mysqld.service systemctl [stop|status|restart] mysqld.service That's all fine, and works great when I want to start/stop manually, however, when it comes to getting it to start at boot (by using 'enable' on systemctl, I get some nasty output): [root@rudivarch ~]# systemctl enable mysqld.service Failed to issue method call: No such file or directory Obviously, since the other commands work just fine, I'm seriously confused by this and have spent a good while trying to figure it out... systemctl status outputs this: [root@rudivarch ~]# systemctl status mysqld.service mysqld.service Loaded: loaded (/etc/rc.d/mysqld) Active: inactive (dead) since Tue, 31 Jan 2012 15:32:28 +0000; 1min 25s ago Process: 589 ExecStop=/etc/rc.d/mysqld stop (code=exited, status=0/SUCCESS) Process: 257 ExecStart=/etc/rc.d/mysqld start (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/mysqld.service Anybody have any ideas as to why 'enable' doesn't work?

    Read the article

  • Proper way for changing MAC address in a linux VM?

    - by HappyDeveloper
    I tried to change the MAC address in a ubuntu VM (virtualbox), but after that it threw lots of errors during boot, and then I had no internet connection. Then I saw that the interface was renamed to eth1, so I edited /etc/network/interfaces to change eth0 to eth1, rebooted (didn't know how to restart the network), and boot was now faster and internet worked fine. But now after every time I log in, I get 1 or 2 error messages that say nothing, they only ask me if I want to report them. So I was wondering, is there was a proper way to change MAC address, to avoid these issues?

    Read the article

  • Xen and HyperVM build question on os template

    - by Levi De Haan
    I recently built a server with hypervm and xen, now i know xen from command line, but hypervm ties into our whmcs and so its a requirement, however my question is this, when i build a new o/s template my partition table is gone, and i know why, but i was wondering if anyone has built anything in hypervm for adding in partition tables, so i dont have to reinvent the wheel :). i can do it command line in the created vm with fdisk, and i have tracked down the creation scripts for hypervm but i am unsure if these insert directly into the machine as it looks like a lot of the things it does are externalized and are for xen to assign things like ip address etc.. oh and on an aside when i go in to modify the .cnf file to change the boot disk from cdrom to drive on windows when i boot using hypervm it overwrites my setting again..frustrating as heck, i've been trying to track down where in the code it does this, has anyone else had this problem and if so how did you fix it if you did?

    Read the article

  • Xen and HyperVM build question on os template

    - by Levi De Haan
    I recently built a server with hypervm and xen, now i know xen from command line, but hypervm ties into our whmcs and so its a requirement, however my question is this, when i build a new o/s template my partition table is gone, and i know why, but i was wondering if anyone has built anything in hypervm for adding in partition tables, so i dont have to reinvent the wheel :). i can do it command line in the created vm with fdisk, and i have tracked down the creation scripts for hypervm but i am unsure if these insert directly into the machine as it looks like a lot of the things it does are externalized and are for xen to assign things like ip address etc.. oh and on an aside when i go in to modify the .cnf file to change the boot disk from cdrom to drive on windows when i boot using hypervm it overwrites my setting again..frustrating as heck, i've been trying to track down where in the code it does this, has anyone else had this problem and if so how did you fix it if you did?

    Read the article

  • P2V using Acronis True Image Home 10 and Windows 7

    - by Anthony
    I have a full system image using Acronis True Image Home 10 and want to run it as a virtual machine on Windows 7 Professional. I have created a virtual machine but Windows Virtual PC doesn't allow access to a USB external hard disk when booting from the Acronis Recovery CD. I've copied the backup onto the host machine and I can access it via the network using the Acronis boot CD but I'm wondering if there is an easier way? Does any other free Virtual Machine software support USB devices during boot (i.e. I can restore a backup image from the USB hard disk directly)

    Read the article

  • Degraded RAID5 and no md superblock on one of remaining drive

    - by ark1214
    This is actually on a QNAP TS-509 NAS. The RAID is basically a Linux RAID. The NAS was configured with RAID 5 with 5 drives (/md0 with /dev/sd[abcde]3). At some point, /dev/sde failed and drive was replaced. While rebuilding (and not completed), the NAS rebooted itself and /dev/sdc dropped out of the array. Now the array can't start because essentially 2 drives have dropped out. I disconnected /dev/sde and hoped that /md0 can resume in degraded mode, but no luck.. Further investigation shows that /dev/sdc3 has no md superblock. The data should be good since the array was unable to assemble after /dev/sdc dropped off. All the searches I done showed how to reassemble the array assuming 1 bad drive. But I think I just need to restore the superblock on /dev/sdc3 and that should bring the array up to a degraded mode which will allow me to backup data and then proceed with rebuilding with adding /dev/sde. Any help would be greatly appreciated. mdstat does not show /dev/md0 # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md5 : active raid1 sdd2[2](S) sdc2[3](S) sdb2[1] sda2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdd4[3] sdc4[2] sdb4[1] sda4[0] 458880 blocks [5/4] [UUUU_] bitmap: 40/57 pages [160KB], 4KB chunk md9 : active raid1 sdd1[3] sdc1[2] sdb1[1] sda1[0] 530048 blocks [5/4] [UUUU_] bitmap: 33/65 pages [132KB], 4KB chunk mdadm show /dev/md0 is still there # mdadm --examine --scan ARRAY /dev/md9 level=raid1 num-devices=5 UUID=271bf0f7:faf1f2c2:967631a4:3c0fa888 ARRAY /dev/md5 level=raid1 num-devices=2 UUID=0d75de26:0759d153:5524b8ea:86a3ee0d spares=2 ARRAY /dev/md0 level=raid5 num-devices=5 UUID=ce3e369b:4ff9ddd2:3639798a:e3889841 ARRAY /dev/md13 level=raid1 num-devices=5 UUID=7384c159:ea48a152:a1cdc8f2:c8d79a9c With /dev/sde removed, here is the mdadm examine output showing sdc3 has no md superblock # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff0e - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 0 8 3 0 active sync /dev/sda3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdb3 /dev/sdb3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff20 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 1 8 19 1 active sync /dev/sdb3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdc3 mdadm: No md superblock detected on /dev/sdc3. [~] # mdadm --examine /dev/sdd3 /dev/sdd3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff44 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 3 8 51 3 active sync /dev/sdd3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed fdisk output shows /dev/sdc3 partition is still there. [~] # fdisk -l Disk /dev/sdx: 128 MB, 128057344 bytes 8 heads, 32 sectors/track, 977 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot Start End Blocks Id System /dev/sdx1 1 8 1008 83 Linux /dev/sdx2 9 440 55296 83 Linux /dev/sdx3 441 872 55296 83 Linux /dev/sdx4 873 977 13440 5 Extended /dev/sdx5 873 913 5232 83 Linux /dev/sdx6 914 977 8176 83 Linux Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 66 530113+ 83 Linux /dev/sda2 67 132 530145 82 Linux swap / Solaris /dev/sda3 133 182338 1463569695 83 Linux /dev/sda4 182339 182400 498015 83 Linux Disk /dev/sda4: 469 MB, 469893120 bytes 2 heads, 4 sectors/track, 114720 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/sda4 doesn't contain a valid partition table Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 66 530113+ 83 Linux /dev/sdb2 67 132 530145 82 Linux swap / Solaris /dev/sdb3 133 182338 1463569695 83 Linux /dev/sdb4 182339 182400 498015 83 Linux Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 66 530125 83 Linux /dev/sdc2 67 132 530142 83 Linux /dev/sdc3 133 182338 1463569693 83 Linux /dev/sdc4 182339 182400 498012 83 Linux Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 66 530125 83 Linux /dev/sdd2 67 132 530142 83 Linux /dev/sdd3 133 243138 1951945693 83 Linux /dev/sdd4 243139 243200 498012 83 Linux Disk /dev/md9: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md9 doesn't contain a valid partition table Disk /dev/md5: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md5 doesn't contain a valid partition table

    Read the article

  • MAC OS for Intel based PCs

    - by Maven
    I have an Intel dual core PC with 4GB of RAM and Graphics card. For on of my student Assignment I need to install Latest possible MAC OS on my system as a secondary OS. Like on boot it asks me that which OS i want to boot with Win 8.1 or Mac Os.. I searched on the internet and found two conflicting opinion some people said there are few MAC OS Version which can be directly installed on Intel PCs some says there aren't? I am here to get rid of the confusion that is an official latest possible MAC OS version for Intel based PCs? If not what are my options if I want to run MAC OS on my PC. Please not that Virtualization options won’t work for me, it has to be working as full OS not an os inside another.

    Read the article

  • VMWare-Tools Installation fails on Ubuntu 11.04

    - by Ajay
    I am trying to install VMwareTools-8.4.6-385536.tar.gz (VMWare Tools) on the following operating system: Ubuntu 11.04 - Linux ubuntu 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux I am using VMPlayer version 3.1.4 - build 385536 ==================================================================== After starting the installation i am getting the following errors: What is the directory that contains the init scripts? [/etc/init.d] Error opening No such file or directory ================================================ Distribution provided drivers for Xorg X server are used. Skipping X configuration because X drivers are not included. Creating a new initrd boot image for the kernel. update-initramfs: Generating /boot/initrd.img-2.6.38-8-generic Starting VMware Tools services in the virtual machine: Switching to guest configuration: done Blocking file system: done Guest operating system daemon: failed Virtual Printing daemon: done Unable to start services for VMware Tools Can somebody help in this?

    Read the article

  • WD My Passport detected but not assigned a drive letter

    - by abel
    I have a WD My Passport external drive which used to work fine on my Win7 x64 box until recently. Since the past few days, windows would not detect my external drive. However, Storage under disk management lists my external drive(which means windows can see my drive) but without a drive letter. I am not able to assign a drive letter(the option is grayed out). I installed EASUS Partition Manager which allows me to assign a drive letter, but fails to do so when I apply to save changes. What do i do to assign a drive letter to the drive or make windows to detect it as of old? The external drive works well on Win7 x32(dual boot, same system) and win7 x64 on another box. Update: cant comment from Opera Mini 6 @zeke the drive works absolutely fine on other Win7 boxes and on the dual boot win7 on the same system.

    Read the article

  • Windows Server 2008 hangs up while booting

    - by Jim R
    Windows Server 2008 hangs up while booting after Windows update applied several updates. The server is a virtual instance on a Server 2008 Hyper-V host. Other virtual servers are fine, but have not been updated. The normal boot shows the horizontal barber poll forever. When I do a safe boot it also hangs up. With a "Please Wait..." after loading many '.sys' files. The last successfully loaded file listed is: '\Windows\system32\drivers\crcdisk.sys' That is the extent of what I have been able to determine.

    Read the article

  • Recover from a recover partition when F11 doesn't work and windows is corrupt

    - by jherlitz
    I have someones presario V3000 laptop. It has a D drive which is the recovery partition. The user brought it to me and windows would no longer even boot up. I could only reload XP and try to find a way to recover from the recovery partition. However haven't been able to. I read, hold F11 down when booting up, but that didn't do anything, and the other item I read is to create the CDs from the software installed in the OS from the factory. Well that is the OS that went corrupt and is no longer there. A new reloaded version of XP is there now. Is there still a way I can either create recover CD's/DVD's or boot from the recovery partition?

    Read the article

  • Restoring the exact state of a linux install to a different laptop with different sized drives and other hardware

    - by user259774
    I have an IBM running a Manjaro install that has already been used and settled into, with packages installed, browser profiles, etc, etc. The drive is 60gb, and it has a swap partition and an ext4 root partition. I need to move this profile to a Toshiba computer with a 320gb drive. How should I go about this? My inclination would be to shut down the toshiba, boot a live linux system, dd the whole 60gb drive to a file, boot the toshiba to a live system, then dd the file to its 320gb drive. Would this work? I know that it wouldn't with windows, but I believe this is an artificially imposed limitation from Microsoft. Is this correct, or is Linux similarly limited? If not, how could I go about this? Would clonezilla work, or would the hardware disparities prevent it from working?

    Read the article

  • Mouse and Keyboard Stop Working on Startup

    - by BoundforPNG
    I have a Dell Optiplex 330 and have recently done a Windows XP repair. After it was finished I was able to use the computer just fine. Now I take it back to it's original location and plug in the OEM mouse and keyboard and they both work until Windows XP loads. As soon as windows loads the lights go out on both the keyboard and mouse.

    Read the article

  • Disable Acer eRecovery system

    - by Joel Coehoorn
    The meat of this question is that I'm looking for a way to either require a password before using a recovery partition or "break" the recovery partition (specifically, Acer eRecovery) in a way that I can later "unbreak" only by booting normally into windows first. Here's the full details: I have a set of new Acer Veriton n260g machines in a computer lab. A lot work went into setting up this lab to work well - for example, Office 2007 and other programs needed by the students were installed, all windows updates are applied, and a default desktop is setup. All in all it's several hours work to fully set up one machine. Unfortunately, I don't currently have the ability to easily image these machines, and even if I did I would want to avoid downtime even while an image is restored. Therefore, I've taken steps to lock them down — namely DeepFreeze and a bios password to prevent booting from anywhere but the frozen hard drive. DeepFreeze is an amazing product — as long as you boot from the frozen hard drive, there is no way to actually make permanent changes to that hard drive. Anything you do is wiped after the machine restarts. It lets me give students the leeway to do what they want on lab computers without worrying about them breaking something. The problem is that even with the bios locked and set to only boot from the hard drive, these Acers still have a simple way to choose a different boot source: shut them down and put a paper click in a little hole at the top while you turn it on again. This puts them into the "Acer eRecovery" mode. This by itself is no big deal — you can still power cycle with no impact. But if you then click through the menu to reset the machine (we're now past the point of curiosity and on to intent) it will wipe the hard drive and restore it to the original state. Of course, a few students have already figured this out and reset a couple machines. That's unfortunate, but inevitable. I don't want to destroy the ability to do this entirely (which I could by repartitioning the drives to remove the recovery partition) but I would like a way to require a password first, or "break" the recovery system in a way that I can "unbreak" only if I first un-freeze the hard drive in DeepFreeze. Any ideas?

    Read the article

  • Drive Genius says: "Invalid catalog btree reverse link in node" is this fixable?

    - by bencnscp
    No obvious problems with my Mac OS X 10.5 system, but Drive Genius 1.5.1 says: "Invalid catalog btree reverse link in node" when doing a "Verify" The "repair" and "rebuild" options fail. I did some googling, and the consensus as: 1- Drive Genius is slightly better than Disk Warrior 2- This problem is likely not fixable. My assumed solution is that I should do a full backup and re-format.

    Read the article

  • Resizing Partitions on Live RHEL/cPanel Server

    - by Timothy R. Butler
    I've resized many partitions over the years on Linux, Windows and Mac OS X -- but always using a GUI. However, the time has come where the preset partition sizes my data center placed on my server aren't the right sizes and I need to resize a production server's disks. I could fiddle with it and probably do OK, but given that it is a production server, I wanted to get some advice about the right way to do this. I do have KVM over IP access, so if it is best to take the server offline and boot off a rescue partition, I can do that. root [/var/lib/mysql]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.9G 2.1G 7.3G 23% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 99M 77M 18M 82% /boot /dev/sda8 884G 463G 376G 56% /home /dev/sda3 9.9G 8.0G 1.5G 85% /usr /dev/sda5 9.9G 9.1G 308M 97% /var /usr/tmpDSK 2.0G 38M 1.8G 3% /tmp As you can see /var and /usr are quite close to being full and I've actually had to symlink some logs on /usr to directories in /home to balance things out. What I would like to do is to add 6-10 GB each to /usr and /var, presumably taking the space from /home. As I think about how the disk is arranged, the best thought I've come up with is to reduce /home by 16 GB, say, and move /var to the spot freed up, then allocating /var's space to /usr. However, that would put /var at the far end of the disk, which seems less than idea, given that MySQL has all of its data on that partition. I'd love to take the space out of the closer end of /usr, but I assume that would take a very arduous (and perhaps risky) process of moving all of the data in /usr around. I seem to recall having such a process fail for me on a computer in the past. The other option might be to merge / and /usr since / is underutilized, though I'm not sure if that's a good idea. Do you have any suggestions both on the best reallocation plan and the commands to use to accomplish it? UPDATE: I should add -- here's the partition table. There's one unused partition, which, if memory serves, was the original tmp location before I created a tmp image: Name Flags Part Type FS Type [Label] Size (MB) ------------------------------------------------------------------------------ Unusable 1.05* sda1 Boot Primary Linux ext2 106.96* sda2 Primary Linux ext3 10737.42* sda3 Primary Linux ext3 10737.42* sda5 NC Logical Linux ext3 10738.47* sda6 NC Logical Linux swap / Solaris 2148.54* sda7 NC Logical Linux ext3 1074.80* sda8 NC Logical Linux ext3 964098.53*

    Read the article

< Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >