Search Results

Search found 11922 results on 477 pages for 'odi solutions and news'.

Page 189/477 | < Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >

  • rsyslogd not monitoring all files

    - by Tom O'Connor
    So.. I've installed Logstash, and instead of using the logstash shipper (because it needs the JVM and is generally massive), I'm using rsyslogd with the following configuration. # Use traditional timestamp format $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat $IncludeConfig /etc/rsyslog.d/*.conf # Provides kernel logging support (previously done by rklogd) $ModLoad imklog # Provides support for local system logging (e.g. via logger command) $ModLoad imuxsock # Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none;local6.none /var/log/messages # The authpriv file has restricted access. authpriv.* /var/log/secure # Log all the mail messages in one place. mail.* -/var/log/maillog # Log cron stuff cron.* /var/log/cron # Everybody gets emergency messages *.emerg * # Save news errors of level crit and higher in a special file. uucp,news.crit /var/log/spooler # Save boot messages also to boot.log local7.* /var/log/boot.log In /etc/rsyslog.d/logstash.conf there are 28 file monitor blocks using imfile $ModLoad imfile # Load the imfile input module $ModLoad imklog # for reading kernel log messages $ModLoad imuxsock # for reading local syslog messages $InputFileName /var/log/rabbitmq/startup_err $InputFileTag rmq-err: $InputFileStateFile state-rmq-err $InputFileFacility local6 $InputRunFileMonitor .... $InputFileName /var/log/some.other.custom.log $InputFileTag cust-log: $InputFileStateFile state-cust-log $InputFileFacility local6 $InputRunFileMonitor .... *.* @@10.90.0.110:5514 There are 28 InputFileMonitor blocks, each monitoring a different custom application logfile.. If I run [root@secret-gm02 ~]# lsof|grep rsyslog rsyslogd 5380 root cwd DIR 253,0 4096 2 / rsyslogd 5380 root rtd DIR 253,0 4096 2 / rsyslogd 5380 root txt REG 253,0 278976 1015955 /sbin/rsyslogd rsyslogd 5380 root mem REG 253,0 58400 1868123 /lib64/libgcc_s-4.1.2-20080825.so.1 rsyslogd 5380 root mem REG 253,0 144776 1867778 /lib64/ld-2.5.so rsyslogd 5380 root mem REG 253,0 1718232 1867780 /lib64/libc-2.5.so rsyslogd 5380 root mem REG 253,0 23360 1867787 /lib64/libdl-2.5.so rsyslogd 5380 root mem REG 253,0 145872 1867797 /lib64/libpthread-2.5.so rsyslogd 5380 root mem REG 253,0 85544 1867815 /lib64/libz.so.1.2.3 rsyslogd 5380 root mem REG 253,0 53448 1867801 /lib64/librt-2.5.so rsyslogd 5380 root mem REG 253,0 92816 1868016 /lib64/libresolv-2.5.so rsyslogd 5380 root mem REG 253,0 20384 1867990 /lib64/rsyslog/lmnsd_ptcp.so rsyslogd 5380 root mem REG 253,0 53880 1867802 /lib64/libnss_files-2.5.so rsyslogd 5380 root mem REG 253,0 23736 1867800 /lib64/libnss_dns-2.5.so rsyslogd 5380 root mem REG 253,0 20768 1867988 /lib64/rsyslog/lmnet.so rsyslogd 5380 root mem REG 253,0 11488 1867982 /lib64/rsyslog/imfile.so rsyslogd 5380 root mem REG 253,0 24040 1867983 /lib64/rsyslog/imklog.so rsyslogd 5380 root mem REG 253,0 11536 1867987 /lib64/rsyslog/imuxsock.so rsyslogd 5380 root mem REG 253,0 13152 1867989 /lib64/rsyslog/lmnetstrms.so rsyslogd 5380 root mem REG 253,0 8400 1867992 /lib64/rsyslog/lmtcpclt.so rsyslogd 5380 root 0r REG 0,3 0 4026531848 /proc/kmsg rsyslogd 5380 root 1u IPv4 1200589517 0t0 TCP 10.10.10.90 t:40629->10.10.10.90:5514 (ESTABLISHED) rsyslogd 5380 root 2u IPv4 1200589527 0t0 UDP *:45801 rsyslogd 5380 root 3w REG 253,3 17999744 2621483 /var/log/messages rsyslogd 5380 root 4w REG 253,3 13383 2621484 /var/log/secure rsyslogd 5380 root 5w REG 253,3 7180 2621493 /var/log/maillog rsyslogd 5380 root 6w REG 253,3 43321 2621529 /var/log/cron rsyslogd 5380 root 7w REG 253,3 0 2621494 /var/log/spooler rsyslogd 5380 root 8w REG 253,3 0 2621495 /var/log/boot.log rsyslogd 5380 root 9r REG 253,3 1064271998 2621464 /var/log/custom-application.monolog.log rsyslogd 5380 root 10u unix 0xffff81081fad2e40 0t0 1200589511 /dev/log You can see that there are nowhere near 28 logfiles actually being read. I really had to get one file monitored, so I moved it to the top, and it picked it up, but I'd like to be able to monitor all 28+ files, and not have to worry. OS is Centos 5.5 Kernel 2.6.18-308.el5 rsyslogd 3.22.1, compiled with: FEATURE_REGEXP: Yes FEATURE_LARGEFILE: Yes FEATURE_NETZIP (message compression): Yes GSSAPI Kerberos 5 support: Yes FEATURE_DEBUG (debug build, slow code): No Atomic operations supported: Yes Runtime Instrumentation (slow code): No Questions: Why is rsyslogd only monitoring a very small subset of the files? How can I fix this so that all the files are monitored?

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so

    Read the article

  • web.config 1.0 and 3.5

    - by kareemsaad
    I had aproblem I had two web site one of them with .net 3.5 and other with 1.0 and I want to run 1.0 in 3.5 but I couldnot and i tried to copy some section from 1.0 to 3.5 as I copied this section <add key="ConnectionString" value="data source=.;persist security info=True;user id=Sharp;Password=#Sharp;initial catalog=Sharp" /> <add key="ACProduct_Upload" value="SiteUploads/ACProducts/" /> <add key="ACPDF_Upload" value="SiteUploads/ACPDF/" /> <add key="ACCertifications_Upload" value="SiteUploads/ACCertifications/" /> <add key="Certifications_Upload" value="SiteUploads/Certifications/" /> <add key="flash" value="flash/" /> <add key="Product_Upload" value="SiteUploads/Products/" /> <add key="PDF_Upload" value="SiteUploads/PDF/" /> <add key="HTML_Upload" value="SiteUploads/HTML_Uploads/" /> <add key="WallPaper_Upload" value="SiteUploads/WallPapers/" /> <add key="News_Upload" value="SiteUploads/News/" /> <add key="mailserver" value="111.111.1.1" /> <add key="fromEmail" value="[email protected]" /> </appSettings> to 3.5 here <add key="ACProduct_Upload" value="SiteUploads/ACProducts/" /> <add key="ACPDF_Upload" value="SiteUploads/ACPDF/" /> <add key="ACCertifications_Upload" value="SiteUploads/ACCertifications/" /> <add key="Certifications_Upload" value="SiteUploads/Certifications/" /> <add key="flash" value="flash/" /> <add key="Product_Upload" value="SiteUploads/Products/" /> <add key="PDF_Upload" value="SiteUploads/PDF/" /> <add key="HTML_Upload" value="SiteUploads/HTML_Uploads/" /> <add key="WallPaper_Upload" value="SiteUploads/WallPapers/" /> <add key="News_Upload" value="SiteUploads/News/" /> <add key="mailserver" value="192.168.6.3" /> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere"/> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> </sectionGroup> </sectionGroup> </sectionGroup> <add name="Sharp" connectionString="Data Source=.;Initial Catalog=SharpHA;User ID=SharpHA;Password=#SharpHA;" providerName="System.Data.SqlClient"/> </connectionStrings> but this problem apear Only one element allowed per config file and if present must be the first child of the root element. please any one help me

    Read the article

  • Publishing an Excel spreadsheet using Microsoft SBS 2008 to a web page that is viewable by mobile ph

    - by Dave Heath
    I am getting well out of my “superuser” depth here and would love some support. At work we have an Excel workbook (*.xls format circa Office 2003) which maintains our “engineers” timesheet. This handles what events we are doing across the year and how many “work units” it is. As far as a workbook goes, it is fairly simple with just a few =SUM(range) cells and some linked across sheets (12 sheets, one for each month) It is stored on a server, in a folder that provides “management” with full access and “engineers” with read-only access. The workbook itself is read-only for “engineers” and full access for “management”. I think these permissions are controlled through Active Directory. The workbook is protected with a password, assumingly to allow “management” to edit it even if they are working at a terminal logged in as an “engineer”. This protection prevents “engineers” from going to certain cells to see formulae and therefore editing them. The workbook has a macro which saves and closes it ten minutes after opening. This is to stop other “management” from being locked out by any one person who has logged in with editing privileges. I hope this is making sense to someone... :S Now then, we have Microsoft Small Business Server 2008. We have a shiny new web-based login for when we are offsite so we can get to Exchange webmail and our internal site (which uses Sharepoint 3.0). “Management” would like to be able to publish this timesheet automatically after changes (they don’t want to have to do anything different to what they are currently doing) so that using an iPhone “engineers” can check on it while out of the office. I am currently having a look at “Excel Services” for Office 2007 on TechNet but I am not sure if I am running down the right garden path at the moment. < EDIT This seems to suggest that I have to have Sharepoint Server 2007, with no mention of Sharepoint 3.0... ... "MOSS builds on WSS by adding both core features as well as end user web parts" - Wikipedia entry for Microsoft Office SharePoint Server (MOSS) this is not good news... "...and using the ASP.NET APIs, web parts can be written to extend the functionality of WSS." Wikipedia entry for Windows Sharepoint Services. Could this bring back what I need? Is this good news? Do I need to start learning ASP.NET? This link here implies that we need MOSS to do what I want and the bosses say we aint' getting it. http://serverfault.com/questions/20198/what-is-some-cool-things-you-can-do-with-sharepoint-2007/22128#22128 Back to the drawing board. < /EDIT Please could someone suggest some “further reading” for me to help point me in the right direction or to put me back on the right track. Many thanks. I will try to keep this up to date with how I get on.

    Read the article

  • Const references when dereferencing iterator on set, starting from Visual Studio 2010

    - by Patrick
    Starting from Visual Studio 2010, iterating over a set seems to return an iterator that dereferences the data as 'const data' instead of non-const. The following code is an example of something that does compile on Visual Studio 2005, but not on 2010 (this is an artificial example, but clearly illustrates the problem we found on our own code). In this example, I have a class that stores a position together with a temperature. I define comparison operators (not all them, just enough to illustrate the problem) that only use the position, not the temperature. The point is that for me two instances are identical if the position is identical; I don't care about the temperature. #include <set> class DataPoint { public: DataPoint (int x, int y) : m_x(x), m_y(y), m_temperature(0) {} void setTemperature(double t) {m_temperature = t;} bool operator<(const DataPoint& rhs) const { if (m_x==rhs.m_x) return m_y<rhs.m_y; else return m_x<rhs.m_x; } bool operator==(const DataPoint& rhs) const { if (m_x!=rhs.m_x) return false; if (m_y!=rhs.m_y) return false; return true; } private: int m_x; int m_y; double m_temperature; }; typedef std::set<DataPoint> DataPointCollection; void main(void) { DataPointCollection points; points.insert (DataPoint(1,1)); points.insert (DataPoint(1,1)); points.insert (DataPoint(1,2)); points.insert (DataPoint(1,3)); points.insert (DataPoint(1,1)); for (DataPointCollection::iterator it=points.begin();it!=points.end();++it) { DataPoint &point = *it; point.setTemperature(10); } } In the main routine I have a set to which I add some points. To check the correctness of the comparison operator, I add data points with the same position multiple times. When writing the contents of the set, I can clearly see there are only 3 points in the set. The for-loop loops over the set, and sets the temperature. Logically this is allowed, since the temperature is not used in the comparison operators. This code compiles correctly in Visual Studio 2005, but gives compilation errors in Visual Studio 2010 on the following line (in the for-loop): DataPoint &point = *it; The error given is that it can't assign a "const DataPoint" to a [non-const] "DataPoint &". It seems that you have no decent (= non-dirty) way of writing this code in VS2010 if you have a comparison operator that only compares parts of the data members. Possible solutions are: Adding a const-cast to the line where it gives an error Making temperature mutable and making setTemperature a const method But to me both solutions seem rather 'dirty'. It looks like the C++ standards committee overlooked this situation. Or not? What are clean solutions to solve this problem? Did some of you encounter this same problem and how did you solve it? Patrick

    Read the article

  • I have finally traded my Blackberry in for a Droid!

    - by Bob Porter
    Over the years I have used a number of different types of phones. Windows Mobile, Blackberry, Nokia, and now Android. Until the Blackberry, which was my last phone (and I still have one issued from my office) I had never found a phone that “just worked” especially with email and messaging. The Blackberry did, and does, excel at those functions. My last personal phone was a Storm 1 which was Blackberry’s first touch screen phone. The Storm 2 was an improved version that fixed some screen press detection issues from the first model and it added Wifi. Over the last few years I have watched others acquire and fall in love with their ‘Droid’s including a number of iPhone users which surprised me. Our office has until recently only supported Blackberry phones, adding iPhones within the last year or so. When I spoke with our internal telecom folks they confirmed they were evaluating Android phones, but felt they still were not secure enough out of the box for corporate use and SOX compliance. That being said, as a personal phone, the Droid Rocks! I am impressed with its speed, the number of apps available, and the overall design. It is not as “flashy” as an iPhone but it does everything that I care about and more. The model I bought is the Motorola Droid 2 Global from Verizon. It is currently running Android 2.2 for it’s OS, 2.3 is just around the corner. It has 8 gigs of internal flash memory and can handle up to a 32 gig SDCard. (I currently have 2 8 gig cards, one for backups, and have ordered a 16 gig card!) Being a geek at heart, I “rooted” the phone which means gained superuser access to the OS on the phone. And opens a number of doors for further modifications down the road. Also being a geek meant I have already setup a development environment and built and deployed the obligatory “Hello Droid” application. I will be writing of my development experiences with this new platform here often, to start off I thought I would share my current application list to give you an idea what I am using. Zedge: http://market.android.com/details?id=net.zedge.android XDA: http://market.android.com/details?id=com.quoord.tapatalkxda.activity WRAL.com: http://market.android.com/details?id=com.mylocaltv.wral Wireless Tether: http://market.android.com/details?id=android.tether Winamp: http://market.android.com/details?id=com.nullsoft.winamp Win7 Clock: http://market.android.com/details?id=com.androidapps.widget.toggles.win7 Wifi Analyzer: http://market.android.com/details?id=com.farproc.wifi.analyzer WeatherBug: http://market.android.com/details?id=com.aws.android Weather Widget Forecast Addon: http://market.android.com/details?id=com.androidapps.weather.forecastaddon Weather & Toggle Widgets: http://market.android.com/details?id=com.androidapps.widget.weather2 Vlingo: http://market.android.com/details?id=com.vlingo.client VirtualTENHO-G: http://market.android.com/details?id=jp.bustercurry.virtualtenho_g Twitter: http://market.android.com/details?id=com.twitter.android TweetDeck: http://market.android.com/details?id=com.thedeck.android.app Tricorder: http://market.android.com/details?id=org.hermit.tricorder Titanium Backup PRO: http://market.android.com/details?id=com.keramidas.TitaniumBackupPro Titanium Backup: http://market.android.com/details?id=com.keramidas.TitaniumBackup Terminal Emulator: http://market.android.com/details?id=jackpal.androidterm Talking Tom Free: http://market.android.com/details?id=com.outfit7.talkingtom Stock Blue: http://market.android.com/details?id=org.adw.theme.stockblue ST: Red Alert Free: http://market.android.com/details?id=com.oldplanets.redalertwallpaper ST: Red Alert: http://market.android.com/details?id=com.oldplanets.redalertwallpaperplus Solitaire: http://market.android.com/details?id=com.kmagic.solitaire Skype: http://market.android.com/details?id=com.skype.raider Silent Time Lite: http://market.android.com/details?id=com.QuiteHypnotic.SilentTime ShopSavvy: http://market.android.com/details?id=com.biggu.shopsavvy Shopper: http://market.android.com/details?id=com.google.android.apps.shopper Shiny clock: http://market.android.com/details?id=com.androidapps.clock.shiny ShareMyApps: http://market.android.com/details?id=com.mattlary.shareMyApps Sense Glass ADW Theme: http://market.android.com/details?id=com.dtanquary.senseglassadwtheme ROM Manager: http://market.android.com/details?id=com.koushikdutta.rommanager Roboform Bookmarklet Installer: http://market.android.com/details?id=roboformBookmarkletInstaller.android.com RealCalc: http://market.android.com/details?id=uk.co.nickfines.RealCalc Package Buddy: http://market.android.com/details?id=com.psyrus.packagebuddy Overstock: http://market.android.com/details?id=com.overstock OMGPOP Toggle: http://market.android.com/details?id=com.androidapps.widget.toggle.omgpop OI File Manager: http://market.android.com/details?id=org.openintents.filemanager nook: http://market.android.com/details?id=bn.ereader MyAtlas-Google Maps Navigation ext: http://market.android.com/details?id=com.adaptdroid.navbookfree3 MSN Droid: http://market.android.com/details?id=msn.droid.im Matrix Live Wallpaper: http://market.android.com/details?id=com.jarodyv.livewallpaper.matrix LogMeIn: http://market.android.com/details?id=com.logmein.ignitionpro.android Liveshare: http://market.android.com/details?id=com.cooliris.app.liveshare Kobo: http://market.android.com/details?id=com.kobobooks.android Instant Heart Rate: http://market.android.com/details?id=si.modula.android.instantheartrate IMDb: http://market.android.com/details?id=com.imdb.mobile Home Plus Weather: http://market.android.com/details?id=com.androidapps.widget.skin.weather.homeplus Handcent SMS: http://market.android.com/details?id=com.handcent.nextsms H7C Clock: http://market.android.com/details?id=com.androidapps.widget.clock.skin.h7c GTasks: http://market.android.com/details?id=org.dayup.gtask GPS Status: http://market.android.com/details?id=com.eclipsim.gpsstatus2 Google Voice: http://market.android.com/details?id=com.google.android.apps.googlevoice Google Sky Map: http://market.android.com/details?id=com.google.android.stardroid Google Reader: http://market.android.com/details?id=com.google.android.apps.reader GoMarks: http://market.android.com/details?id=com.androappsdev.gomarks Goggles: http://market.android.com/details?id=com.google.android.apps.unveil Glossy Black Weather: http://market.android.com/details?id=com.androidapps.widget.weather.skin.glossyblack Fox News: http://market.android.com/details?id=com.foxnews.android Foursquare: http://market.android.com/details?id=com.joelapenna.foursquared FBReader: http://market.android.com/details?id=org.geometerplus.zlibrary.ui.android Fandango: http://market.android.com/details?id=com.fandango Facebook: http://market.android.com/details?id=com.facebook.katana Extensive Notes Pro: http://market.android.com/details?id=com.flufflydelusions.app.extensive_notes_donate Expense Manager: http://market.android.com/details?id=com.expensemanager Espresso UI (LightShow w/ Slide): http://market.android.com/details?id=com.jaguirre.slide.lightshow Engadget: http://market.android.com/details?id=com.aol.mobile.engadget Earth: http://market.android.com/details?id=com.google.earth Drudge: http://market.android.com/details?id=com.iavian.dreport Dropbox: http://market.android.com/details?id=com.dropbox.android DroidForums: http://market.android.com/details?id=com.quoord.tapatalkdrodiforums.activity DroidArmor ADW: http://market.android.com/details?id=mobi.addesigns.droidarmorADW Droid Weather Icons: http://market.android.com/details?id=com.androidapps.widget.weather.skins.white Droid 2 Bootstrapper: http://market.android.com/details?id=com.koushikdutta.droid2.bootstrap doubleTwist: http://market.android.com/details?id=com.doubleTwist.androidPlayer Documents To Go: http://market.android.com/details?id=com.dataviz.docstogo Digital Clock Widget: http://market.android.com/details?id=com.maize.digitalClock Desk Home: http://market.android.com/details?id=com.cowbellsoftware.deskdock Default Clock: http://market.android.com/details?id=com.androidapps.widget.clock.skins.defaultclock Daily Expense Manager: http://market.android.com/details?id=com.techahead.ExpenseManager ConnectBot: http://market.android.com/details?id=org.connectbot Colorized Weather Icons: http://market.android.com/details?id=com.androidapps.widget.weather.colorized Chrome to Phone: http://market.android.com/details?id=com.google.android.apps.chrometophone CardStar: http://market.android.com/details?id=com.cardstar.android Books: http://market.android.com/details?id=com.google.android.apps.books Black Ipad Toggle: http://market.android.com/details?id=com.androidapps.toggle.widget.skin.blackipad Black Glass ADW Theme: http://market.android.com/details?id=com.dtanquary.blackglassadwtheme Bing: http://market.android.com/details?id=com.microsoft.mobileexperiences.bing BeyondPod Unlock Key: http://market.android.com/details?id=mobi.beyondpod.unlockkey BeyondPod: http://market.android.com/details?id=mobi.beyondpod BeejiveIM: http://market.android.com/details?id=com.beejive.im Beautiful Widgets Animations Addon: http://market.android.com/details?id=com.levelup.bw.forecast Beautiful Widgets: http://market.android.com/details?id=com.levelup.beautifulwidgets Beautiful Live Weather: http://market.android.com/details?id=com.levelup.beautifullive BBC News: http://market.android.com/details?id=net.jimblackler.newswidget Barnacle Wifi Tether: http://market.android.com/details?id=net.szym.barnacle Barcode Scanner: http://market.android.com/details?id=com.google.zxing.client.android ASTRO SMB Module: http://market.android.com/details?id=com.metago.astro.smb ASTRO Pro: http://market.android.com/details?id=com.metago.astro.pro ASTRO Bluetooth Module: http://market.android.com/details?id=com.metago.astro.network.bluetooth ASTRO: http://market.android.com/details?id=com.metago.astro AppBrain App Market: http://market.android.com/details?id=com.appspot.swisscodemonkeys.apps App Drawer Icon Pack: http://market.android.com/details?id=com.adwtheme.appdrawericonpack androidVNC: http://market.android.com/details?id=android.androidVNC AndroidGuys: http://market.android.com/details?id=com.handmark.mpp.AndroidGuys Android System Info: http://market.android.com/details?id=com.electricsheep.asi AndFTP: http://market.android.com/details?id=lysesoft.andftp ADWTheme Red: http://market.android.com/details?id=adw.theme.red ADWLauncher EX: http://market.android.com/details?id=org.adwfreak.launcher ADW.Theme.One: http://market.android.com/details?id=org.adw.theme.one ADW.Faded theme: http://market.android.com/details?id=com.xrcore.adwtheme.faded ADW Gingerbread: http://market.android.com/details?id=me.robertburns.android.adwtheme.gingerbread Advanced Task Killer Free: http://market.android.com/details?id=com.rechild.advancedtaskkiller Adobe Reader: http://market.android.com/details?id=com.adobe.reader Adobe Flash Player 10.1: http://market.android.com/details?id=com.adobe.flashplayer Adobe AIR: http://market.android.com/details?id=com.adobe.air 3G Auto OnOff: http://market.android.com/details?id=com.yuantuo --- Generated by ShareMyApps http://market.android.com/details?id=com.mattlary.shareMyApps Sent from my Droid

    Read the article

  • CodePlex Daily Summary for Tuesday, March 09, 2010

    CodePlex Daily Summary for Tuesday, March 09, 2010New Projects.NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: .NET Excel Wrapper encapsulates the complexity of working with multiple Excel objects giving you one central point to do all your processing. It h...Advancement Voyage: Advancement Voyage is a high quality RPG experience that provides all the advancement and voyaging that a player could hope for.ASP.Net Routing configuration: ASP.NET routing configuration enables you to configure the routes in the web.config bbinjest: bbinjestBuildUp: BuildUp is a build number increment tool for C# .net projects. It is run as a post build step in Visual Studio.Controlled Vocabulary: This project is devoted to creating tools to assist with Controlling Vocabulary in communication. The initial delivery is an Outlook 2010 Add-in w...CycleList: A replacement for the WPF ListBox Control. Displays only a single item and allows the user to change the selected item by clicking on it once. Very...Forensic Suite: A suite of security softwareFREE DNN Chat Module for 123 Flash Chat -- Embed FREE Chat Room!: 123 Flash Chat is a live chat solution and its DotNetNuke Chat Module helps to embed a live chat room into website with DotNetNuke(DNN) integrated ...HouseFly experimental controls: Experimental controls for use in HouseFly.ICatalogAll: junkMidiStylus: MidiStylus allows you to control MIDI-enabled hardware or software using your pressure-sensitive pen tablet. The program maps the X position, Y po...myTunes: Search for your favorite artistsNColony - Pluggable Socialism?: NColony will maximize the use of MEF to create flexible application architectures through a suite of plug-in solutions. If MEF is an outlet for plu...Network Monitor Decryption Expert: NmDecrypt is a Network Monitor Expert which when given a trace with encrypted frames, a security certificate, and a passkey will create a new trace...occulo: occulo is a free steganography program, meant to embed files within images with optional encrytion. Open Ant: A implementation of a Open Source Ant which is created to show what is possible in the serious game AntMe! The First implementation of that ProjectProgramming Patterns by example: Design patterns provide solutions to common software design problems. This project will contain samples, written in c# and ruby, of each design pat...project4k: Developing bulk mail system storing email informationQuail - Selenium Remote Control Made Easy: Quail makes it easy for Quality Assurance departments write automated tests against web applications. Both HTML and Silverlight applications can b...RedBulb for XNA Framework: RedBulb is a collection of utility functions and classes that make writing games with XNA a lot easier. Key features: Console,GUI (Labels, Buttons,...RegExpress: RegExpress is a WPF application that combines interactive demos of regular expressions with slide content. This was designed for a user group prese...RemoveFolder: Small utility program to remove empty foldersScrumTFS: ScrumTFSSharePoint - Open internal link in new window list definition: A simple SharePoint list definition to render SharePoint internal links with the option to open them in a new window.SqlSiteMap4MVC: SqlSiteMapProvider for ASP.Net MVC.T Sina .NET Client: t.sina.com.cn api 新浪微博APITest-Lint-Extensions: Test Lint is a free Typemock VS 2010 Extension that finds common problems in your unit tests as you type them. this project will host extensions ...ThinkGearNET: ThinkGearNET is a library for easy usage of the Neurosky Mindset headset from .NET .Wiki to Maml: This project enables you to write wiki syntax and have it converted into MAML syntax for Sandcastle documentation projects.WPF Undo/Redo Framework: This project attempts to solve the age-old programmer problem of supporting unlimited undo/redo in an application, in an easily reusable manner. Th...WPFValidators: WPF Validators Validações de campos para WPFWSP Listener: The WSP listener is a windows service application which waits for new WSC and WSP files in a specific folder. If a new WSC and WSP file are added, ...New Releases.NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: First Release: This is the first release which includes the main library release..NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: Updated Version: New Features:SetRangeValue using multidimensional array Print current worksheet Print all worksheets Format ranges background, color, alig...ArkSwitch: ArkSwitch v1.1.2: This release removes all memory reporting information, and is focused on stability.BattLineSvc: V2.1: - Fixed a bug where on system start-up, it would pop up a notification box to let you know the service started. Annoying! And fixed! - Fixed the ...BuildUp: BuildUp 1.0 Alpha 1: Use at your own risk!Not yet feature complete. Basic build incrementing and attribute overriding works. Still working on cascading build incremen...Controlled Vocabulary: 1.0.0.1: Initial Alpha Release. System Requirements Outlook 2010 .Net Framework 3.5 Installation 1. Close Outlook (Use Task Manager to ensure no running i...CycleList: CycleList: The binaries contain the .NET 3.5 DLL ONLY. Please download source for usage examples.FluentNHibernate.Search: 0.3 Beta: 0.3 Beta take the following changes : Mappings : - Field Mapping without specifying "Name" - Id Mapping without specifiying "Field" - Builtin Anal...FREE DNN Chat Module for 123 Flash Chat -- Embed FREE Chat Room!: 123 Flash Chat DNN Chat Module: With FREE DotNetNuke Chat Module of 123 Flash Chat, webmaster will be assist to add a chat room into DotNetNuke instantly and help to attract more ...GameStore League Manager: League Manager 1.0 release 3: This release includes a full installer so that you can get your league running faster and generate interest quicker.iExporter - iTunes playlist exporting: iExporter gui v2.3.1.0 - console v1.2.1.0: Paypal donate! Solved a big bug for iExporter ( Gui & Console ) When a track isn't located under the main iTunes library, iExporter would crash! ...jQuery.cssLess: jQuery.cssLess 0.3: New - Removed the dependency from XRegExp - Added comment support (both CSS style and C style) - Optimised it for speed - Added speed test TOD...jQuery.cssLess: jQuery.cssLess 0.4: NEW - @import directive - preserving of comments in the resulting CSS - code refactoring - more class oriented approach TODO - implement operation...MapWindow GIS: MapWindow 6.0 msi (March 8): Rewrote the shapefile saving code in the indexed case so that it uses the shape indices rather than trying to create features. This should allow s...MidiStylus: MidiStylus 0.5.1: MidiStylus Beta 0.5.1 This release contains basic functionality for transmitting MIDI data based on X position, Y position, and pressure value rea...MiniTwitter: 1.09.1: MiniTwitter 1.09.1 更新内容 修正 URL に & が含まれている時に短縮 URL がおかしくなるバグを修正Mosaictor: first executable: .exe file of the app in its current state. Mind you that this will likely be highly unstable due to heaps of uncaught errors.MvcContrib a Codeplex Foundation project: T4MVC: T4MVC is a T4 template that generates strongly typed helpers for ASP.NET MVC. You can download it below, and check out the documention here.N2 CMS: 2.0 beta: Major Changes ASP.NET MVC 2 templates Refreshed management UI LINQ support Performance improvements Auto image resize Upgrade Make a comp...NotesForGallery: ASP.NET AJAX Photo Gallery Control: NotesForGallery 2.0: PresentationNotesForGallery is an open source control on top of the Microsoft ASP.NET AJAX framework for easy displaying image galleries in the as...occulo: occulo 0.1 binaries: Windows binaries. Tested on Windows XP SP2.occulo: occulo 0.1 source: Initial source release.Open NFe: DANFE 1.9.5: Ajuste de layout e correção dos campos de ISS.patterns & practices Web Client Developer Guidance: Web Application Guidance -- March 8th Drop: This iteration we focused on documentation and bug fixes.PoshConsole: PoshConsole 2.0 Beta: With this release, I am refocusing PoshConsole... It will be a PowerShell 2 host, without support for PowerShell 1.0 I have used some of the new P...Quick Performance Monitor: QPerfmon 1.1: Now you can specify different updating frequencies.RedBulb for XNA Framework: Cipher Puzzle (Sample) Creators Club Package: RedBulb Sample Game: Cipher Puzzle http://bayimg.com/image/galgfaacb.jpgRedBulb for XNA Framework: RedBulbStarter (Base Code): This is the code you need to start with. Quick Start Guide: Download the latest version of RedBulb: http://redbulb.codeplex.com/releases/view/415...RoTwee: RoTwee 7.0.0.0 (Alpha): Now this version is under improvement of code structure and may be buggy. However movement of rotation is quite good in this version thanks to clea...SCSI Interface for Multimedia and Block Devices: Release 9 - Improvements and Bug Fixes: Changes I have made in this version: Fixed INQUIRY command timeout problem Lowered ISOBurn's memory usage significantly by not explicitly setting...SharePoint - Open internal link in new window list definition: Open link in new window list definition: First release, with english and italian localization supportSharePoint Outlook Connector: Version 1.2.3.2: Few bug fixing and some ui enhancementsSysI: sysi, release build: Better than ever -- now allows for escalation to adminThe Silverlight Hyper Video Player [http://slhvp.com]: Beta 1: Beta (1.1) The code is ready for intensive testing. I will update the code at least every second day until we are ready to freeze for V1, which wi...Truecrafting: Truecrafting 0.52: fixed several trinkets that broke just before i released 0.51, sorry fixed water elemental not doing anything while summoned if not using glyph o...Truecrafting: Truecrafting 0.53: fixed mp5 calculations when gear contained mp5 and made the formulas more efficient no need to rebuild profiles with this release if placed in th...umbracoSamplePackageCreator (beta): Working Beta: For Visual Studio 2008 creating packages for Umbraco 4.0.3.VCC: Latest build, v2.1.30307.0: Automatic drop of latest buildVCC: Latest build, v2.1.30308.0: Automatic drop of latest buildVOB2MKV: vob2mkv-1.0.3: This is a maintenance update of the VOB2MKV utility. The MKVMUX filter now describes the cluster locations using a separate SeekHead element at th...WPFValidators: WPFValidators 1.0 Beta: Primeira versão do componente ainda em Beta, pode ser utilizada em produção pois esta funcionando bem e as futuras alterações não sofreram muito im...WSDLGenerator: WSDLGenerator 0.0.06: - Added option to generate SharePoint compatible *disco.aspx file. - Changed commandline optionsWSP Listener: WSP Listener version 1.0.0.0: First version of the WSP Listener includes: Easy cop[y paste installation of WSP solutions Extended logging E-mail when installation is finish...Yet another pali text reader: Pali Text Reader App v1.1: new features/updates + search history is now a tab + format codes in dictionary + add/edit terms in the dictionary + pali keyboard inserts symbols...Most Popular ProjectsMetaSharpi4o - Indexed LINQResExBraintree Client LibraryGeek's LibrarySharepoint Feature ManagerConfiguration ManagementOragon Architecture SqlBuilderTerrain Independant Navigating Automaton v2.0WBFS ManagerMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web ServicesFasterflect - A Fast and Simple Reflection APIFarseer Physics Enginepatterns & practices – Enterprise LibraryTeam FTW - Software ProjectIonics Isapi Rewrite Filter

    Read the article

  • Scott Guthrie in Glasgow

    - by Martin Hinshelwood
    Last week Scott Guthrie was in Glasgow for his new Guathon tour, which was a roaring success. Scott did talks on the new features in Visual Studio 2010, Silverlight 4, ASP.NET MVC 2 and Windows Phone 7. Scott talked from 10am till 4pm, so this can only contain what I remember and I am sure lots of things he discussed just went in one ear and out another, however I have tried to capture at least all of my Ohh’s and Ahh’s. Visual Studio 2010 Right now you can download and install Visual Studio 2010 Candidate Release, but soon we will have the final product in our hands. With it there are some amazing improvements, and not just in the IDE. New versions of VB and C# come out of the box as well as Silverlight 4 and SharePoint 2010 integration. The new Intellisense features allow inline support for Types and Dictionaries as well as being able to type just part of a name and have the list filter accordingly. Even better, and my personal favourite is one that Scott did not mention, and that is that it is not case sensitive so I can actually find things in C# with its reasonless case sensitivity (Scott, can we please have an option to turn that off.) Another nice feature is the Routing engine that was created for ASP.NET MVC is now available for WebForms which is good news for all those that just imported the MVC DLL’s to get at it anyway. Another fantastic feature that will need some exploring is the ability to add validation rules to your entities and have them validated automatically on the front end. This removes the need to add your own validators and means that you can control an objects validation rules from a single location, the object. A simple command “GridView.EnableDynamicData(gettype(product))“ will enable this feature on controls. What was not clear was wither there would be support for this in WPF and WinForms as well. If there is, we can write our validation rules once and use everywhere. I was disappointed to here that there would be no inbuilt support for the Dynamic Language Runtime (DLR) with VS2010, but I think it will be there for .vNext. Because I have been concentrating on the Visual Studio ALM enhancements to VS2010 I found this section invaluable as I now know at least some of what I missed. Silverlight 4 I am not a big fan of Silverlight. There I said it, and I will probably get lynched for it. My big problem with Silverlight is that most of the really useful things I leaned from WPF do not work. I am only going to mention one thing and that is “x:Type”. If you are a WPF developer you will know how much power these 6 little letters provide; the ability to target templates at object types being the the most magical and useful. But, and this is a massive but, if you are developing applications that MUST run on platforms other than windows then Silverlight is your only choice (well that and Flash, but lets just not go there). And Silverlight has a huge install base as well.. 60% of all internet connected devices have Silverlight. Can Adobe say that? Even though I am not a fan of it my current project is a Silverlight one. If you start your XAML experience with Silverlight you will not be disappointed and neither will the users of the applications you build. Scott showed us a fantastic application called “Silverface” that is a Silverlight 4 Out of Browser application. I have looked for a link and can’t find one, but true to form, here is a fantastic WPF version called Fish Bowl from Microsoft. ASP.NET MVC 2 ASP.NET MVC is something I have played with but never used in anger. It is definitely the way forward, but WebForms is not dead yet. there are still circumstances when WebForms are better. If you are starting from greenfield and you are using TDD, then MVC is ultimately the only way you can go. New in version 2 are Dynamic Scaffolding helpers that let you control how data is presented in the UI from the Entities. Adding validation rules and other options that make sense there can help improve the overall ease of developing the UI. Also the Microsoft team have heard the cries of help from the larger site builders and provided “Areas” which allow a level of categorisation to your Controllers and Views. These work just like add-ins and have their own folder, but also have sub Controllers and Views. Areas are totally pluggable and can be dropped onto existing sites giving the ability to have boxed products in MVC, although what you do with all of those views is anyone's guess. They have been listening to everyone again with the new option to encapsulate UI using the Html.Action or Html.ActionRender. This uses the existing  .ascx functionality in ASP.NET to render partial views to the screen in certain areas. While this was possible before, it makes the method official thereby opening it up to the masses and making it a standard. At the end of the session Scott pulled out some IIS goodies including the IIS SEO Toolkit which can be used to verify your own site is “good” for search engine consumption. Better yet he suggested that you run it against your friends sites and shame them with how bad they are. note: make sure you have fixed yours first. Windows Phone 7 Series I had already seen the new UI for WP7 and heard about the developer story, but Scott brought that home by building a twitter application in about 20 minutes using the emulator. Scott’s only mistake was loading @plip’s tweets into the app… And guess what, it was written in Silverlight. When Windows Phone 7 launches you will be able to use about 90% of the codebase of your existing Silverlight application and use it on the phone! There are two downsides to the new WP7 architecture: No, your existing application WILL NOT work without being converted to either a Silverlight or XNA UI. NO, you will not be able to get your applications onto the phone any other way but through the Marketplace. Do I think these are problems? No, not even slightly. This phone is aimed at consumers who have probably never tried to install an application directly onto a device. There will be support for enterprise apps in the future, but for now enterprises should stay on Windows Phone 6.5.x devices. Post Event drinks At the after event drinks gathering Scott was checking out my HTC HD2 (released to the US this month on T-Mobile) and liked the Windows Phone 6.5.5 build I have on it. We discussed why Microsoft were not going to allow Windows Phone 7 Series onto it with my understanding being that it had 5 buttons and not 3, while Scott was sure that there was more to it from a hardware standpoint. I think he is right, and although the HTC HD2 has a DX9 compatible processor, it was never built with WP7 in mind. However, as if by magic Saturday brought fantastic news for all those that have already bought an HD2: Yes, this appears to be Windows Phone 7 running on a HTC HD2. The HD2 itself won't be getting an official upgrade to Windows Phone 7 Series, so all eyes are on the ROM chefs at the moment. The rather massive photos have been posted by Tom Codon on HTCPedia and they've apparently got WiFi, GPS, Bluetooth and other bits working. The ROM isn't online yet but according to the post there's a beta version coming soon. Leigh Geary - http://www.coolsmartphone.com/news5648.html  What was Scott working on on his flight back to the US?   Technorati Tags: VS2010,MVC2,WP7S,WP7 Follow: @CAMURPHY, @ColinMackay, @plip and of course @ScottGu

    Read the article

  • CodePlex Daily Summary for Saturday, March 10, 2012

    CodePlex Daily Summary for Saturday, March 10, 2012Popular ReleasesPlayer Framework by Microsoft: Player Framework for Windows 8 Metro (BETA): Player Framework for HTML/JavaScript and XAML/C# Metro Style Applications.WPF Application Framework (WAF): WAF for .NET 4.5 (Experimental): Version: 2.5.0.440 (Experimental): This is an experimental release! It can be used to investigate the new .NET Framework 4.5 features. The ideas shown in this release might come in a future release (after 2.5) of the WPF Application Framework (WAF). More information can be found in this dicussion post. Requirements .NET Framework 4.5 (The package contains a solution file for Visual Studio 11) The unit test projects require Visual Studio 11 Professional Changelog All: Upgrade all proje...SSH.NET Library: 2012.3.9: There are still few outstanding issues I wanted to include in this release but since its been a while and there are few new features already I decided to create a new release now. New Features Add SOCKS4, SOCKS5 and HTTP Proxy support when connecting to remote server. For silverlight only IP address can be used for server address when using proxy. Add dynamic port forwarding support using ForwardedPortDynamic class. Add new ShellStream class to work with SSH Shell. Add supports for mu...Test Case Import Utilities for Visual Studio 2010 and Visual Studio 11 Beta: V1.2 RTM: This release (V1.2 RTM) includes: Support for connecting to Hosted Team Foundation Server Preview. Support for connecting to Team Foundation Server 11 Beta. Fix to issue with read-only attribute being set for LinksMapping-ReportFile which may have led to problems when saving the report file. Fix to issue with “related links” not being set properly in certain conditions. Fix to ensure that tool works fine when the Excel file contained rich text data. Note: Data is still imported in pl...Audio Pitch & Shift: Audio Pitch And Shift 3.5.0: Modules (mod, xm, it, etc..) supportcallisto: callisto 2.0.19: BUG FIX: Autorun.load() function in scripting now has sandboxed path (Thanks Mikey!) BUG FIX: UserObject.Name property now allows full 20 byte string replacements. FEATURE REQUEST: File.* script functions now allow file extensions.EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v2.1: Changelog Fixed template file access issue on Win7. Fix on configuration load when target project was not found and "Use project default namespace" was checked. Minor fix on loading latest configuration at startup. Minor fix in VisualStudioHelper class. DTO's properties accessors are now in one line. Improvements in PropertyHelper to get a cleaner and more performant code. Added Website project type as a not supported project type. Using Error List pane from VS IDE to show Enti...DotNetNuke® Community Edition CMS: 06.01.04: Major Highlights Fixed issue with loading the splash page skin in the login, privacy and terms of use pages Fixed issue when searching for words with special characters in them Fixed redirection issue when the user does not have permissions to access a resource Fixed issue when clearing the cache using the ClearHostCache() function Fixed issue when displaying the site structure in the link to page feature Fixed issue when inline editing the title of modules Fixed issue with ...Mayhem: Mayhem Developer Preview: This is the developer preview of Mayhem. Enjoy!Team Foundation Server Process Template Customization Guidance: v1 - For Visual Studio 11: Welcome to the BETA release of the Team Foundation Server Process Template Customization preview. As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Documentation has not been rev...Magelia WebStore Open-source Ecommerce software: Magelia WebStore 1.2: Medium trust compliant lot of small change for medium trust compliance full refactoring of user management refactoring of Client Refactoring of user management Magelia.WebStore.Client no longer reference Magelia.WebStore.Services.Contract Refactoring page category multi parent category added copy category feature added Refactoring page catalog copy catalog feature added variant management improvement ability to define a default variant for a variable product ability to ord...PDFsharp - A .NET library for processing PDF: PDFsharp and MigraDoc Foundation 1.32: PDFsharp and MigraDoc Foundation 1.32 is a stable version that fixes a few bugs that were found with version 1.31. Version 1.32 includes solutions for Visual Studio 2010 only (but it should be possible to add the project files to existing solutions for VS 2005 or VS 2008). Users of VS 2005 or VS 2008 can still download version 1.31 with the solutions for those versions that allow them to easily try the samples that are included. While it may create smaller PDF files than version 1.30 because...Terminals: Version 2.0 - Release: Changes since version 1.9a:New art works New usability in Organize favorites window Improved usability of imports/exports and scans Large number of fixes Improvements in single instance mode Comparing November beta 4, this corrects: New application icons Doesn't show Logon error codes Fixed command line arguments exception for single instance mode Fixed detaching of tabs improved usability in detached window Fixed option settings for Capture manager Fixed system tray noti...MFCMAPI: March 2012 Release: Build: 15.0.0.1032 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeTortoiseHg: TortoiseHg 2.3.1: bugfix releaseSimple Injector: Simple Injector v1.4.1: This release adds two small improvements to the SimpleInjector.Extensions.dll. No changes have been made to the core library. New features and improvements in this release for the SimpleInjector.Extensions.dll The RegisterManyForOpenGeneric extension methods now accept non-generic decorator, as long as they implement the given open generic service type. GetTypesToRegister methods added to the OpenGenericBatchRegistrationExtensions class which allows to customize the behavior. Note that the...CommonLibrary: Code: CodeVidCoder: 1.3.1: Updated HandBrake core to 0.9.6 release (svn 4472). Removed erroneous "None" container choice. Change some logic and help text to stop assuming you have to pick the VIDEO_TS folder for a DVD scan. This should make previewing DVD titles on the Queue Multiple Titles window possible when you've picked the root DVD directory.Google Books Downloader for Windows: Google Books Downloader: Google Books Downloader 1.8ExtAspNet: ExtAspNet v3.1.0: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://extasp.net/ ??:http://bbs.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-03-04 v3.1.0 -??Hidden???????(〓?〓)。 -?PageManager??...New ProjectsAres Backup: Ares Backup is a Backup software which can save bytediffs and provides several storage plugins.BackItUp: Backup-Tool für Visual Studio Projektebinbin domain: binbin domain Blexus Service Plattform: Some cool stuff about Wcf Services. - can communicate files - can communicate xaml objects (generate dynamically Gui) CardPlay - a Solitaire Framework for .Net: CardPlay is a C# framework for developing Solitaire card games. The solution includes a sample WPF client along with over 100 games.Cloud Files Upload: Windows application to script cloud file uploads.Code First API Library, Scaffolding & Guidance for Coded UI Tests: Code first Coded UI Tests for web apps. Library, Scaffolding and Guidance.CPEBook by FMUG & TPAY: CPEBook by MUG & TPAY Projet dot NET CPEBookDot Net Application String Resources Viewer: Dot Net Application String Resources ViewerFilter for SharePoint Web Settings Page: This solution show a simple way to integrate a filter box by using jquery, a global farm feature and a simple delegate control for AdditionalPageHead.Google Books Downloader for Windows: Save Google books in PDF, JPEG or PNG format.GUIToolkit: C++ Windowless GUI,DirectUIHarvest Sports: Harvest SportsInfoPath Analyzer: InfoPath Analyzer makes InfoPath form development and troubleshooting much easier. You're easy to find the relationship between controls and data fields, search data fields or controls by name, edit InfoPath inner html directly.Kinectsignlanguage project: This project will help kinect be used for sign language to speech so that sign language people can be understood while talking to important people. LotteryVote: ????manager123: Trying out CodePlexMcRegister: McRegister is an asp.net mvc 3 razor website that enables you to register users on your minecraft server it works in conjunction with a minecraft mod called EasyAuth.MetroTipi: HelloTipi Sous l'interface Metro de Windows 8Microsoft AppFactory: AppFactory is a powerful data-driven build system for Windows Phone (and soon Windows 8) projects. Its purpose is to help developers start with template projects and turn them into suites of applications.MiniStock: MiniStock is an experimental reference architecture for scalable cloud-based architectures. Implemented in .net.online book shopping: online book shoppingScopa: Carousel Team Scopa per WP7 XNA testtom03092012tfs01: testtom03092012tfs01UsingLib: A library of automatically removed utilities: 1.Changing cursor to hourglass in Windows Forms 2.Logging It's developed in C#WHMCS Library: WHMCS is an all-in-one client management, billing & support solution for online businesses. Handling everything from signup to termination, WHMCS is a powerful business automation tool that puts you firmly in control. The WHMCS Library is a .NET wrapper for the WHMCS API. Written entirely in C# but really easy to port over to VB.NET. Coming from a VB.NET background we tried hard to make sure porting would be simple for VB.NET community members. ZoneEditService: Windows service to update ZoneEdit for dynamic dns.

    Read the article

  • .NET 4.5 is an in-place replacement for .NET 4.0

    - by Rick Strahl
    With the betas for .NET 4.5 and Visual Studio 11 and Windows 8 shipping many people will be installing .NET 4.5 and hacking away on it. There are a number of great enhancements that are fairly transparent, but it's important to understand what .NET 4.5 actually is in terms of the CLR running on your machine. When .NET 4.5 is installed it effectively replaces .NET 4.0 on the machine. .NET 4.0 gets overwritten by a new version of .NET 4.5 which - according to Microsoft - is supposed to be 100% backwards compatible. While 100% backwards compatible sounds great, we all know that 100% is a hard number to hit, and even the aforementioned blog post at the Microsoft site acknowledges this. But there's so much more than backwards compatibility that makes this awkward at best and confusing at worst. What does ‘Replacement’ mean? When you install .NET 4.5 your .NET 4.0 assemblies in the \Windows\.NET Framework\V4.0.30319 are overwritten with a new set of assemblies. You end up with overwritten assemblies as well as a bunch of new ones (like the new System.Net.Http assemblies for example). The following screen shot demonstrates system.dll on my test machine (left) running .NET 4.5 on the right and my production laptop running stock .NET 4.0 (right):   Clearly they are different files with a difference in file sizes (interesting that the 4.5 version is actually smaller). That’s not all. If you actually query the runtime version when .NET 4.5 is installed with with Environment.Version you still get: 4.0.30319 If you open the properties of System.dll assembly in .NET 4.5 you'll also see: Notice that the file version is also left at 4.0.xxx. There are differences in build numbers: .NET 4.0 shows 261 and the current .NET 4.5 beta build is 17379. I suppose you can use assume a build number greater than 17000 is .NET 4.5, but that's pretty hokey to say the least. There’s no easy or obvious way to tell whether you are running on 4.0 or 4.5 – to the application they appear to be the same runtime version. And that is what Microsoft intends here. .NET 4.5 is intended as an in-place upgrade. Compile to 4.5 run on 4.0 – not quite! You can compile an application for .NET 4.5 and run it on the 4.0 runtime – that is until you hit a new feature that doesn’t exist on 4.0. At which point the app bombs at runtime. Say you write some code that is mostly .NET 4.0, but only has a few of the new features of .NET 4.5 like aync/await buried deep in the bowels of the application where it only fires occasionally. .NET will happily start your application and run everything 4.0 fine, until it hits that 4.5 code – and then crash unceremoniously at runtime. Oh joy! You can .NET 4.0 applications on .NET 4.5 of course and that should work without much fanfare. Different than .NET 3.0/3.5 Note that this in-place replacement is very different from the side by side installs of .NET 2.0 and 3.0/3.5 which all ran on the 2.0 version of the CLR. The two 3.x versions were basically library enhancements on top of the core .NET 2.0 runtime. Both versions ran under the .NET 2.0 runtime which wasn’t changed (other than for security patches and bug fixes) for the whole 3.x cycle. The 4.5 update instead completely replaces the .NET 4.0 runtime and leaves the actual version number set at v4.0.30319. When you build a new project with Visual Studio 2011, you can still target .NET 4.0 or you can target .NET 4.5. But you are in effect referencing the same set of assemblies for both regardless which version you use. What's different is the compiler used to compile and link your code so compiling with .NET 4.0 gives you just the subset of the functionality that is available in .NET 4.0, but when you use the 4.5 compiler you get the full functionality of what’s actually available in the assemblies and extra libraries. It doesn’t look like you will be able to use Visual Studio 2010 to develop .NET 4.5 applications. Good news – Bad news Microsoft is trying hard to experiment with every possible permutation of releasing new versions of the .NET framework apparently. No two updates have been the same. Clearly updating to a full new version of .NET (ie. .NET 2.0, 4.0 and at some point 5.0 runtimes) has its own set of challenges, but doing an in-place update of the runtime and then not even providing a good way to tell which version is installed is pretty whacky even by Microsoft’s standards. Especially given that .NET 4.5 includes a fairly significant update with all the aysnc functionality baked into the runtime. Most of the IO APIs have been updated to support task based async operation which significantly affects many existing APIs. To make things worse .NET 4.5 will be the initial version of .NET that ships with Windows 8 so it will be with us for a long time to come unless Microsoft finally decides to push .NET versions onto Windows machines as part of system upgrades (which currently doesn’t happen). This is the same story we had when Vista launched with .NET 3.0 which was a minor version that quickly was replaced by 3.5 which was more long lived and practical. People had enough problems dealing with the confusing versioning of the 3.x versions which ran on .NET 2.0. I can’t count the amount support calls and questions I’ve fielded because people couldn’t find a .NET 3.5 entry in the IIS version dialog. The same is likely to happen with .NET 4.5. It’s all well and good when we know that .NET 4.5 is an in-place replacement, but administrators and IT folks not intimately familiar with .NET are unlikely to understand this nuance and end up thoroughly confused which version is installed. It’s hard for me to see any upside to an in-place update and I haven’t really seen a good explanation of why this approach was decided on. Sure if the version stays the same existing assembly bindings don’t break so applications can stay running through an update. I suppose this is useful for some component vendors and strongly signed assemblies in corporate environments. But seriously, if you are going to throw .NET 4.5 into the mix, who won’t be recompiling all code and thoroughly test that code to work on .NET 4.5? A recompile requirement doesn’t seem that serious in light of a major version upgrade.  Resources http://blogs.msdn.com/b/dotnet/archive/2011/09/26/compatibility-of-net-framework-4-5.aspx http://www.devproconnections.com/article/net-framework/net-framework-45-versioning-faces-problems-141160© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • XNA Notes 010

    - by George Clingerman
    With GDC 2011 wrapping up there were a LOT of great interviews and posts with and about XNA and XBLIG and some of our more notorious developers. Definitely worth spending many, many hours watching, listening and reading all those. Very inspiring! Also, don’t forget to get signed up for Dream Build Play! And just as an early warning reminder do NOT, I repeat do NOT wait to submit your game the last day. There are major issues submitting the last day every year and you do not want all your hard work to be hanging on whether your entry actually went through in that last day. Plan on submitting a few days if not a week before. I’m serious, you’ll thank yourself later! Now on to what’s happening in the XNA community! Time Critical XNA News: PAX East Meet Up (really wish I was going!) http://forums.create.msdn.com/forums/p/71921/439262.aspx Want to stay panicked about the countdown to Dream Build Play? Mike McLaughlin shares his DBP countdown clock http://twitter.com/#!/mikebmcl/status/44454458960252928 XNA Team: Nick Gravelyn Only needs less than 600 new users in his unique marketing plan for Pixel Man 2 http://nickgravelyn.com/pixelman2/ And hares his ad revenue numbers with his XNA WP7 games http://theoneswiththelight.com/2011/my-results-with-ad-revenue-for-wp7-games/ XNA MVPs: Andy “The ZMan” Dunn posts his 15,000th App Hub forum post and shares a few thoughts on the MVP summit http://forums.create.msdn.com/forums/t/77625.aspx Chris Williams shares his thoughts on the MVP summit http://geekswithblogs.net/cwilliams/archive/2011/03/07/144229.aspx XNA Developers: Nathan Fouts of Mommy’s Best games Wraps up GDC http://mommysbest.blogspot.com/2011/03/gdc-2011-wrapped.html And shares the wonderful screenshots from Serious Sam. (I’m so jealous people at PAX East willl be playing a demo of this game!) http://mommysbest.blogspot.com/2011/03/serious-sam-double-d.html James Silva of Ska Studios announces http://www.ska-studios.com/2011/03/09/vampire-smile-at-hotel-sierra/ http://www.ska-studios.com/2011/03/08/vengeance-begins-april-6th/ http://www.ska-studios.com/2011/03/04/good-morning-gato-52/ Michael McLaughlin writes an extremely useful set of tips for XNA WP7 developers http://geekswithblogs.net/mikebmcl/archive/2011/03/10/tips-for-xna-wp7-developers.aspx Robert Boyd “the one man XBLIG improving machine” posts his 9 tips for marketing an Xbox LIVE Indie Gam http://www.gamasutra.com/blogs/RobertBoyd/20110309/7183/9_Tips_for_XBLIG_Marketing.php http://forums.create.msdn.com/forums/p/77534/470586.aspx#470586 And shares his day by day experience at GDC this year http://www.gamasutra.com/blogs/RobertBoyd/20110301/7118/GDC_Saves_the_World__Impressions_Day_1.php http://www.gamasutra.com/blogs/RobertBoyd/20110301/7123/GDC_Saves_the_World__Impressions_Day_2.php http://www.gamasutra.com/blogs/RobertBoyd/20110303/7129/GDC_Saves_the_World__Impressions_Day_3.php http://www.gamasutra.com/blogs/RobertBoyd/20110307/7133/GDC_Saves_the_World__Impressions_Day_4.php http://www.gamasutra.com/blogs/RobertBoyd/20110307/7160/GDC_Saves_the_World__Impressions_Day_5.php Phillipe Da Silva releases new IGF Pong Sample preview http://www.vimeo.com/20904070 Xbox LIVE Indie Games (XBLIG): Gamergeddon posts XBox Indie Game Roundup for March 6th http://www.gamergeddon.com/2011/03/06/xbox-indie-game-round-up-march-6th/ Dealspwn interviews FortressCraft developer Projector Games http://www.dealspwn.com/fortresscraft-developer-interview-minecraft-clones-venting-haters-part-1/ http://www.dealspwn.com/fortresscraft-developer-interview-part-2-trials-tribulations-indie-development/ Writings of Mass Destruction continues the Xbox LIVE Indie Game a day campaign, here’s his take on FishCraft (be sure to check out his other posts!) http://writingsofmassdeduction.com/2011/03/05/day-116-fishcraft/ Tom Ogburn shares his GDC notes on the XBLIG panel jotted quickly while attending the panel http://twitter.com/#!/TOgburn/status/44454191028125696 http://www.starlitskygames.com/blogs/site_news/archive/2011/03/06/802.aspx Dave Voyles of Armless Octopus has crazy good coverage on XNA and Xbox LIVE Indie Game developers at GDC 2011. Interviews and articles all extremely well done! http://www.armlessoctopus.com/2011/03/06/gdc-2011-successful-indie-developers-share-insight-on-microsofts-self-publishing-service/ There’s honestly so many posts and interviews you should just hit his front page and scroll down through all of the latest ones. http://www.armlessoctopus.com/ GameMarx Episode 12 http://www.gamemarx.com/video/the-show/27/ep-12-march-4-2011.aspx B.U.T.T.O.N now on Steam! http://www.gamesetwatch.com/2011/03/button_party_game_now_on_steam.php German Xbox Dashboard gets review program from GamePro http://www.armlessoctopus.com/2011/03/07/gamepo-indie-review-show-debuts-on-german-xbox-dashboard/ XboxIndies.com (one of the best XNA sites out there at this point!) continues to add review sites to it’s main review feed. (And don’t forget to play with that awesome XBLIG pivot control!) http://xboxindies.com/ Kris Steele of FunInfused Games shares early footage of his game World of Chalk http://twitter.com/#!/kriswd40/status/45007114371989504 Raymond Matthews of Darkstarmatryx reviews FunInfused Games Abduction Action http://www.darkstarmatryx.com/?p=264 TheVideoGamerRob reviews Zombie Football Carnage http://videogamerrob.wordpress.com/2011/03/08/xblig-review-zombie-football-carnage/ XBLIG Square Off Making the Jump to WP7 http://www.wp7connect.com/2011/03/08/xblig-square-off-will-make-the-jump-to-windows-phone/ Mommy’s Best Games making the news round with their Serious Sam announcement http://www.joystiq.com/2011/03/09/serious-sam-gets-serious-indie-cred-with-new-indie-series/ Most quoted and linked XBLIG article of the week with the least amount of actual facts and reporting. Shared only because it makes me sad that this is the best coverage we get. (Hey reporters, there’s LOT and LOTS of XBLIG and XNA experts you can contact if you need to check up on facts or wonder why on questions like, Why can’t XBLIGs have Nazis? There’s actually a real answer for that..) http://www.joystiq.com/2011/03/06/xblig-facts-nazi-killing-a-no-no-revenue-a-yes-yes/ XNA Development: Mort8088 has been in an XNA tutorial writing frenzy releasing 4 XNA 4.0 entry level tutorials this week! http://mort8088.com/2011/03/06/xna-4-0-tutorial-0-intro/ http://mort8088.com/2011/03/06/xna-4-0-tutorial-1-fonts/ http://mort8088.com/2011/03/06/xna-4-0-tutorial-2-sprites/ http://mort8088.com/2011/03/06/xna-4-0-tutorial-3-input-from-keyboard/ Interesting discussion on what it means to be a community (you do have to sign up to be a member of the XNA UK forums to read it...) http://twitter.com/#!/XNAUK/status/44705269254594560 Slyprid continues his incredible pace on Transmute and shares screens of his new Animation Builder http://twitter.com/#!/slyprid/status/45169271847911424 http://forgottenstarstudios.com/blog/ Philippe Da Silva wants to know who is using IGF for their games. If it’s you, drop him a note letting him know! http://twitter.com/#!/philippedasilva/status/44325893719588864 New Sunburn Video Tutorials released http://www.synapsegaming.com/blogs/fivesidedbarrel/archive/2011/03/07/new-documentation-video-tutorials.aspx Loading and rendering animated collada models using XNA 4.0 http://bunkernetz.wordpress.com/2011/03/09/loading-and-rendering-animated-collada-models-using-xna-4-0/ XNA for Silverlight Developers Part 6 Accelerometer Input http://buzzgamesnews.blogspot.com/2011/03/xna-for-silverlight-developers-part-6.html

    Read the article

  • Collaborate 2010 Recap: A lot of Excitement for Oracle Content Management 11g

    - by [email protected]
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Collaborate brought me to Las Vegas last week and what a week it was.  Each day was jam packed with Oracle Content Management sessions, and almost every session I attended was full.  Across the 35+ sessions that were given by my Oracle peers, Oracle partners, and Oracle customers, the majority of the discussion and questions that were asked had to do with the release of Oracle Content Management 11g.  Just to bring everyone up-to-speed, the first wave of Oracle Content Management 11g releases happened this past January as Oracle Imaging & Process Management and Oracle Information Rights Management went GA.  The next wave, which should be released soon, includes Oracle Universal Content Management and Oracle Universal Records Management. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Andy MacMillan and Roel Stalman kicked off these discussions last Monday, as they presented Oracle Content Management's product strategy and roadmap.  It seemed that the attendees liked what they heard regarding the strategy and future direction, but the question that seems to always come up after roadmap presentations is "when will the product be released"?  This is a question that none of us have the power to answer, but soon customers will be able to enjoy these new product capabilities: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Unified content repository across ECMCentralized installation, access, administration & monitoringCertified application integrations with solution templatesOpen Web Content Management Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Stay tuned for more news about the release of Oracle Universal Content Management and Oracle Records Management.  There are a lot of new assets currently being built that will help get everyone up-to-speed quickly. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Outside of the sessions that were presented, there were a lot of other activities that took place at Collaborate.  The Enterprise 2.0 solutions demo pod was busy, and attendees were anxious to see demonstrations of Oracle's end-to-end document imaging solution, WebCenter Spaces, and web site creation using Oracle Universal Content Management.   I also want to thank our partners (Fishbowl Solutions, Redstone Content Solutions, Bezzotech, Team Informatics, and DTI) for their efforts in creating detailed, insightful presentations.  Also, special thanks are in order to Thomas Feldmeier and Markus Neubauer of Silbury IT-Beratung GmbH for their participation.  It seems that Thomas and Markus were doomed to be stranded in Frankfurt after the Icelandic ash storm.  They couldn't get a flight out of their native Germany, and with fear that they would miss Collaborate, they rented a car and drove to Rome - some 800 miles (1,200 kilometers).  Anyway, they made it safe and sound to Las Vegas, and although probably a bit tired, they gave 2 Oracle Content Management presentations.  Talk about commitment. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Finally, a very special thanks to Al Hoof and Dave Chaffee of the Oracle Content Management Special Interest Group (SIG).  Al and Dave did most of the heavy lifting for Collaborate, including the coordination of all the sessions.  The Independent Oracle Users Group presented Al with the Chris Wooldridge award, recognizing him as the volunteer of the year.  Here is Al with his award: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} I hope to see you next year at Collaborate as the show returns to Orlando.

    Read the article

  • 10 Reasons Why Java is the Top Embedded Platform

    - by Roger Brinkley
    With the release of Oracle ME Embedded 3.2 and Oracle Java Embedded Suite, Java is now ready to fully move into the embedded developer space, what many have called the "Internet of Things". Here are 10 reasons why Java is the top embedded platform. 1. Decouples software development from hardware development cycle Development is typically split between both hardware and software in a traditional design flow . This leads to complicated co-design and requires prototype hardware to be built. This parallel and interdependent hardware / software design process typically leads to two or more re-development phases. With Embedded Java, all specific work is carried out in software, with the (processor) hardware implementation fully decoupled. This with eliminate or at least reduces the need for re-spins of software or hardware and the original development efforts can be carried forward directly into product development and validation. 2. Development and testing can be done (mostly) using standard desktop systems through emulation Because the software and hardware are decoupled it now becomes easier to test the software long before it reaches the hardware through hardware emulation. Emulation is the ability of a program in an electronic device to imitate another program or device. In the past Java tools like the Java ME SDK and the SunSPOTs Solarium provided developers with emulation for a complete set of mobile telelphones and SunSpots. This often included network interaction or in the case of SunSPOTs radio communication. What emulation does is speed up the development cycle by refining the software development process without the need of hardware. The software is fixed, redefined, and refactored without the timely expense of hardware testing. With tools like the Java ME 3.2 SDK, Embedded Java applications can be be quickly developed on Windows based platforms. In the end of course developers should do a full set of testing on the hardware as incompatibilities between emulators and hardware will exist, but the amount of time to do this should be significantly reduced. 3. Highly productive language, APIs, runtime, and tools mean quick time to market Charles Nutter probably said it best in twitter blog when he tweeted, "Every time I see a piece of C code I need to port, my heart dies a little. Then I port it to 1/4 as much Java, and feel better." The Java environment is a very complex combination of a Java Virtual Machine, the Java Language, and it's robust APIs. Combine that with the Java ME SDK for small devices or just Netbeans for the larger devices and you have a development environment where development time is reduced significantly meaning the product can be shipped sooner. Of course this is assuming that the engineers don't get slap happy adding new features given the extra time they'll have.  4. Create high-performance, portable, secure, robust, cross-platform applications easily The latest JIT compilers for the Oracle JVM approach the speed of C/C++ code, and in some memory allocation intensive circumstances, exceed it. And specifically for the embedded devices both ME Embedded and SE Embedded have been optimized for the smaller footprints.  In portability Java uses Bytecode to make the language platform independent. This creates a write once run anywhere environment that allows you to develop on one platform and execute on others and avoids a platform vendor lock in. For security, Java achieves protection by confining a Java program to a Java execution environment and not allowing it to access other parts of computer.  In variety of systems the program must execute reliably to be robust. Finally, Oracle Java ME Embedded is a cross-industry and cross-platform product optimized in release version 3.2 for chipsets based on the ARM architectures. Similarly Oracle Java SE Embedded works on a variety of ARM V5, V6, and V7, X86 and Power Architecture Linux. 5. Java isolates your apps from language and platform variations (e.g. C/C++, kernel, libc differences) This has been a key factor in Java from day one. Developers write to Java and don't have to worry about underlying differences in the platform variations. Those platform variations are being managed by the JVM. Gone are the C/C++ problems like memory corruptions, stack overflows, and other such bugs which are extremely difficult to isolate. Of course this doesn't imply that you won't be able to get away from native code completely. There could be some situations where you have to write native code in either assembler or C/C++. But those instances should be limited. 6. Most popular embedded processors supported allowing design flexibility Java SE Embedded is now available on ARM V5, V6, and V7 along with Linux on X86 and Power Architecture platforms. Java ME Embedded is available on system based on ARM architecture SOCs with low memory footprints and a device emulation environment for x86/Windows desktop computers, integrated with the Java ME SDK 3.2. A standard binary of Oracle Java ME Embedded 3.2 for ARM KEIL development boards based on ARM Cortex M-3/4 (KEIL MCBSTM32F200 using ST Micro SOC STM32F207IG) will soon be available for download from the Oracle Technology Network (OTN). 7. Support for key embedded features (low footprint, power mgmt., low latency, etc) All embedded devices by there very nature are constrained in some way. Economics may dictate a device with a less RAM and ROM. The CPU needs can dictate a less powerful device. Power consumption is another major resource in some embedded devices as connecting to consistent power source not always desirable or possible. For others they have to constantly on. Often many of these systems are headless (in the embedded space it's almost always Halloween).  For memory resources ,Java ME Embedded can run in environment as low as 130KB RAM/350KB ROM for a minimal, customized configuration up to 700KB RAM/1500KB ROM for the full, standard configuration. Java SE Embedded is designed for environments starting at 32MB RAM/39MB  ROM. Key functionality of embedded devices such as auto-start and recovery, flexible networking are fully supported. And while Java SE Embedded has been optimized for mid-range to high-end embedded systems, Java ME Embedded is a Java runtime stack optimized for small embedded systems. It provides a robust and flexible application platform with dedicated embedded functionality for always-on, headless (no graphics/UI), and connected devices. 8. Leverage huge Java developer ecosystem (expertise, existing code) There are over 9 million developers in world that work on Java, and while not all of them work on embedded systems, their wealth of expertise in developing applications is immense. In short, getting a java developer to work on a embedded system is pretty easy, you probably have a java developer living in your subdivsion.  Then of course there is the wealth of existing code. The Java Embedded Community on Java.net is central gathering place for embedded Java developers. Conferences like Embedded Java @ JavaOne and the a variety of hardware vendor conferences like Freescale Technlogy Forums offer an excellent opportunity for those interested in embedded systems. 9. Easily create end-to-end solutions integrated with Java back-end services In the "Internet of Things" things aren't on an island doing an single task. For instance and embedded drink dispenser doesn't just dispense a beverage, but could collect money from a credit card and also send information about current sales. Similarly, an embedded house power monitoring system doesn't just manage the power usage in a house, but can also send that data back to the power company. In both cases it isn't about the individual thing, but monitoring a collection of  things. How much power did your block, subdivsion, area of town, town, county, state, nation, world use? How many Dr Peppers were purchased from thing1, thing2, thingN? The point is that all this information can be collected and transferred securely  (and believe me that is key issue that Java fully supports) to back end services for further analysis. And what better back in service exists than a Java back in service. It's interesting to note that on larger embedded platforms that support the Java Embedded Suite some of the analysis might be done on the embedded device itself as JES has a glassfish server and Java Database as part of the installation. The result is an end to end Java solution. 10. Solutions from constrained devices to server-class systems Just take a look at some of the embedded Java systems that have already been developed and you'll see a vast range of solutions. Livescribe pen, Kindle, each and every Blu-Ray player, Cisco's Advanced VOIP phone, KronosInTouch smart time clock, EnergyICT smart metering, EDF's automated meter management, Ricoh Printers, and Stanford's automated car  are just a few of the list of embedded Java implementation that continues to grow. Conclusion Now if your a Java Developer you probably look at some of the 10 reasons and say "duh", but for the embedded developers this is should be an eye opening list. And with the release of ME Embedded 3.2 and the Java Embedded Suite the embedded developers life is now a whole lot easier. For the Java developer your employment opportunities are about to increase. For both it's a great time to start developing Java for the "Internet of Things".

    Read the article

  • Thank You for a Great Welcome for Oracle GoldenGate 11g Release 2

    - by Irem Radzik
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Yesterday morning we had two launch webcasts for Oracle GoldenGate 11g Release 2. I had the pleasure to present, as well as moderate the Q&A panels in both of these webcasts. Both events had hundreds of live attendees, sending us over 150 questions. Even though we left 30 minutes for Q&A, it was not nearly enough time to address for all the insightful questions our audience sent. Our product management team and I really appreciate the interaction we had yesterday and we are starting to respond back with outstanding questions today. Oracle GoldenGate’s new release launch also had great welcome from the media. You can find the links for various articles on the new release below: ITBusinessEdge Oracle Embraces Cross-Platform Data Integration Information Week: Oracle Real-Time Advance Taps Compressed Data Integration Developer News, Oracle GoldenGate Adds Deeper Oracle Integration, Extends Real-Time Performance CIO, Oracle GoldenGate Buddies Up with Sibling Software DBTA, Real-Time Data Integration: Oracle GoldenGate 11g Release 2 Now Available CBR Oracle unveils GoldenGate 11g Release 2 real-time data integration application In this blog, I want to address some of the frequently asked questions that came up during the webcasts. You can find the top questions and their answers along with related resources below. We will continue to address frequently asked questions via future blogs. Q: Will the new Integrated Capture for Oracle Database replace the Classic Capture? If not, which one do I use when? A: No, Classic Capture will be around for long time. Core platform specific features, bug fixes, and patches will be available for both Capture processes.Oracle Database specific features will be only available in the Integrated Capture. The Integrated Capture for Oracle Database is an option for users that need to capture data from compressed tables or need support for XML data types, XA on RAC. Users who don’t leverage these features should continue to use our Classic Capture. For more information on Oracle GoldenGate 11g Release 2 I recommend to check out the White paper: Oracle GoldenGate 11gR2 New Features as well as other technical white papers we have on OTN.                                                         For those of you coming to OpenWorld, please attend the related session: Extracting Data in Oracle GoldenGate Integrated Capture Mode, Monday Oct 1st 1:45pm Moscone South – 102 to learn more about this new feature. Q: What is new in Conflict Detection and Resolution? And how does it work? A: There are now pre-built functions to identify the conditions under which an error occurs and how to handle the record when the condition occurs. Error conditions handled include inserts into a target table where the row already exists, updates or deletes to target table rows that exist, but the original source data (before columns) do not match the existing data in the target row, and updates or deletes where the row does not exist in the target database table.Foreach of these conditions a method to handle the error is specified.  Please check out our recent blog on this topic and the White paper: Oracle GoldenGate 11gR2 New Features white paper.  Also, for those attending OpenWorld please attend the session: Best Practices for Conflict Detection and Resolution in Oracle GoldenGate for Active/Active-  Wednesday Oct 3rd  3:30pm Mascone 3000 Q: Does Oracle GoldenGate Veridata and the Management Pack require additional licenses, or is it incorporated with the GoldenGate license? A: Oracle GoldenGate Veridata and Oracle Management Pack for Oracle GoldenGate are additional products and require separate licenses. Please check out Oracle's price list here. Q: Does GoldenGate - Oracle Enterprise Manager Plug-in require additional license? A: Oracle Enterprise Manager Plug-in is included in the Oracle Management Pack for Oracle GoldenGate license, which is separate from Oracle GoldenGate license. There is no separate license for the Enterprise Manager Plug-in by itself. Oracle GoldenGate Monitor, Oracle GoldenGate Director, and Enterprise Manager Plug-in are included in the Management Pack for Oracle GoldenGate license. Please check out Management Pack for Oracle GoldenGate data sheet for more info on this product bundle. Q: Is Oracle GoldenGate replacing Oracle Streams product? A: Oracle GoldenGate is the strategic data replication product. Therefore, Oracle Streams will continue to be supported, but will not be actively enhanced. Rather, the best elements of Oracle Streams will be added to Oracle GoldenGate. Conflict management is one of them and with the latest release Oracle GoldenGate has a more advanced conflict management offering. Current customers depending on Oracle Streams will continue to be fully supported. Q: How is Oracle GoldenGate different than Oracle Data Integrator? A: Oracle Data Integrator is designed for fast bulk data movement and transformation between heterogeneous systems, while GoldenGate is designed for real-time movement of transactions between heterogeneous systems. These two products are completely complementary where GoldenGate provides low-impact real-time change data capture and delivery to a staging area on the target. And Oracle Data Integrator transforms this data and loads the DW tables. In fact, Oracle Data Integrator integrates with GoldenGate to use GoldenGate’s Capture process as one option for its CDC mechanism. We have several customers that deployed GoldenGate and ODI together to feed real-time data to their data warehousing solutions. Please also check out Oracle Data Integrator Changed Data Capture with Oracle GoldenGate Data Sheet (PDF). Thank you again very much for welcoming Oracle GoldenGate 11g Release 2 and stay in touch with us for more exciting news, updates, and events.

    Read the article

  • Microsoft&rsquo;s new technical computing initiative

    - by Randy Walker
    I made a mental note from earlier in the year.  Microsoft literally buys computers by the truckload.  From what I understand, it’s a typical practice amongst large software vendors.  You plug a few wires in, you test it, and you instantly have mega tera tera flops (don’t hold me to that number).  Microsoft has been trying to plug away at their cloud services (named Azure).  Which, for the layman, means Microsoft runs your software on their computers, and as demand increases you can allocate more computing power on the fly. With this in mind, it doesn’t surprise me that I was recently sent an executive email concerning Microsoft’s new technical computing initiative.  I find it to be a great marketing idea with actual substance behind their real work.  From the programmer academic perspective, in college we dreamed about this type of processing power.  This has decades of computer science theory behind it. A copy of the email received.  (note that I almost deleted this email, thinking it was spam due to it’s length) We don't often think about how complex life really is. Take the relatively simple task of commuting to and from work: it is, in fact, a complicated interplay of variables such as weather, train delays, accidents, traffic patterns, road construction, etc. You can however, take steps to shorten your commute - using a good, predictive understanding of a few of these variables. In fact, you probably are already taking these inputs and instinctively building a predictive model that you act on daily to get to your destination more quickly. Now, when we apply the same method to very complex tasks, this modeling approach becomes much more challenging. Recent world events clearly demonstrated our inability to process vast amounts of information and variables that would have helped to more accurately predict the behavior of global financial markets or the occurrence and impact of a volcano eruption in Iceland. To make sense of issues like these, researchers, engineers and analysts create computer models of the almost infinite number of possible interactions in complex systems. But, they need increasingly more sophisticated computer models to better understand how the world behaves and to make fact-based predictions about the future. And, to do this, it requires a tremendous amount of computing power to process and examine the massive data deluge from cameras, digital sensors and precision instruments of all kinds. This is the key to creating more accurate and realistic models that expose the hidden meaning of data, which gives us the kind of insight we need to solve a myriad of challenges. We have made great strides in our ability to build these kinds of computer models, and yet they are still too difficult, expensive and time consuming to manage. Today, even the most complicated data-rich simulations cannot fully capture all of the intricacies and dependencies of the systems they are trying to model. That is why, across the scientific and engineering world, it is so hard to say with any certainty when or where the next volcano will erupt and what flight patterns it might affect, or to more accurately predict something like a global flu pandemic. So far, we just cannot collect, correlate and compute enough data to create an accurate forecast of the real world. But this is about to change. Innovations in technology are transforming our ability to measure, monitor and model how the world behaves. The implication for scientific research is profound, and it will transform the way we tackle global challenges like health care and climate change. It will also have a huge impact on engineering and business, delivering breakthroughs that could lead to the creation of new products, new businesses and even new industries. Because you are a subscriber to executive e-mails from Microsoft, I want you to be the first to know about a new effort focused specifically on empowering millions of the world's smartest problem solvers. Today, I am happy to introduce Microsoft's Technical Computing initiative. Our goal is to unleash the power of pervasive, accurate, real-time modeling to help people and organizations achieve their objectives and realize their potential. We are bringing together some of the brightest minds in the technical computing community across industry, academia and science at www.modelingtheworld.com to discuss trends, challenges and shared opportunities. New advances provide the foundation for tools and applications that will make technical computing more affordable and accessible where mathematical and computational principles are applied to solve practical problems. One day soon, complicated tasks like building a sophisticated computer model that would typically take a team of advanced software programmers months to build and days to run, will be accomplished in a single afternoon by a scientist, engineer or analyst working at the PC on their desktop. And as technology continues to advance, these models will become more complete and accurate in the way they represent the world. This will speed our ability to test new ideas, improve processes and advance our understanding of systems. Our technical computing initiative reflects the best of Microsoft's heritage. Ever since Bill Gates articulated the then far-fetched vision of "a computer on every desktop" in the early 1980's, Microsoft has been at the forefront of expanding the power and reach of computing to benefit the world. As someone who worked closely with Bill for many years at Microsoft, I am happy to share with you that the passion behind that vision is fully alive at Microsoft and is carried out in the creation of our new Technical Computing group. Enabling more people to make better predictions We have seen the impact of making greater computing power more available firsthand through our investments in high performance computing (HPC) over the past five years. Scientists, engineers and analysts in organizations of all sizes and sectors are finding that using distributed computational power creates societal impact, fuels scientific breakthroughs and delivers competitive advantages. For example, we have seen remarkable results from some of our current customers: Malaria strikes 300,000 to 500,000 people around the world each year. To help in the effort to eradicate malaria worldwide, scientists at Intellectual Ventures use software that simulates how the disease spreads and would respond to prevention and control methods, such as vaccines and the use of bed nets. Technical computing allows researchers to model more detailed parameters for more accurate results and receive those results in less than an hour, rather than waiting a full day. Aerospace engineering firm, a.i. solutions, Inc., needed a more powerful computing platform to keep up with the increasingly complex computational needs of its customers: NASA, the Department of Defense and other government agencies planning space flights. To meet that need, it adopted technical computing. Now, a.i. solutions can produce detailed predictions and analysis of the flight dynamics of a given spacecraft, from optimal launch times and orbit determination to attitude control and navigation, up to eight times faster. This enables them to avoid mistakes in any areas that can cause a space mission to fail and potentially result in the loss of life and millions of dollars. Western & Southern Financial Group faced the challenge of running ever larger and more complex actuarial models as its number of policyholders and products grew and regulatory requirements changed. The company chose an actuarial solution that runs on technical computing technology. The solution is easy for the company's IT staff to manage and adjust to meet business needs. The new solution helps the company reduce modeling time by up to 99 percent - letting the team fine-tune its models for more accurate product pricing and financial projections. Our Technical Computing direction Collaborating closely with partners across industry and academia, we must now extend the reach of technical computing even further to help predictive modelers and data explorers make faster, more accurate predictions. As we build the Technical Computing initiative, we will invest in three core areas: Technical computing to the cloud: Microsoft will play a leading role in bringing technical computing power to scientists, engineers and analysts through the cloud. Existing high- performance computing users will benefit from the ability to augment their on-premises systems with cloud resources that enable 'just-in-time' processing. This platform will help ensure processing resources are available whenever they are needed-reliably, consistently and quickly. Simplify parallel development: Today, computers are shipping with more processing power than ever, including multiple cores, but most modern software only uses a small amount of the available processing power. Parallel programs are extremely difficult to write, test and trouble shoot. However, a consistent model for parallel programming can help more developers unlock the tremendous power in today's modern computers and enable a new generation of technical computing. We are delivering new tools to automate and simplify writing software through parallel processing from the desktop... to the cluster... to the cloud. Develop powerful new technical computing tools and applications: We know scientists, engineers and analysts are pushing common tools (i.e., spreadsheets and databases) to the limits with complex, data-intensive models. They need easy access to more computing power and simplified tools to increase the speed of their work. We are building a platform to do this. Our development efforts will yield new, easy-to-use tools and applications that automate data acquisition, modeling, simulation, visualization, workflow and collaboration. This will allow them to spend more time on their work and less time wrestling with complicated technology. Thinking bigger There is so much left to be discovered and so many questions yet to be answered in the fascinating world around us. We believe the technical computing community will show us that we have not seen anything yet. Imagine just some of the breakthroughs this community could make possible: Better predictions to help improve the understanding of pandemics, contagion and global health trends. Climate change models that predict environmental, economic and human impact, accessible in real-time during key discussions and debates. More accurate prediction of natural disasters and their impact to develop more effective emergency response plans. With an ambitious charter in hand, this new team is ready to build on our progress to-date and execute Microsoft's technical computing vision over the months and years ahead. We will steadily invest in the right technologies, tools and talent, and work to bring together the technical computing community. I invite you to visit www.modelingtheworld.com today. We welcome your ideas and feedback. I look forward to making this journey with you and others who want to answer the world's biggest questions, discover solutions to problems that seem impossible and uncover a host of new opportunities to change the world we live in for the better. Bob

    Read the article

  • ASP.NET MVC JavaScript Routing

    - by zowens
    Have you ever done this sort of thing in your ASP.NET MVC view? The weird thing about this isn’t the alert function, it’s the code block containing the Url formation using the ASP.NET MVC UrlHelper. The terrible thing about this experience is the obvious lack of IntelliSense and this ugly inline JavaScript code. Inline JavaScript isn’t portable to other pages beyond the current page of execution. It is generally considered bad practice to use inline JavaScript in your public-facing pages. How ludicrous would it be to copy and paste the entire jQuery code base into your pages…? Not something you’d ever consider doing. The problem is that your URLs have to be generated by ASP.NET at runtime and really can’t be copied to your JavaScript code without some trickery. How about this? Does the hard-coded URL bother you? It really bothers me. The typical solution to this whole routing in JavaScript issue is to just hard-code your URLs into your JavaScript files and call it done. But what if your URLs change? You have to now go an track down the places in JavaScript and manually replace them. What if you get the pattern wrong? Do you have tests around it? This isn’t something you should have to worry about.   The Solution To Our Problems The solution is to port routing over to JavaScript. Does that sound daunting to you? It’s actually not very hard, but I decided to create my own generator that will do all the work for you. What I have created is a very basic port of the route formation feature of ASP.NET routing. It will generate the formatted URLs based on your routing patterns. Here’s how you’d do this: Does that feel familiar? It looks a lot like something you’d do inside of your ASP.NET MVC views… but this is inside of a JavaScript file… just a plain ol’ .js file.  Your first question might be why do you have to have that “.toUrl()” thing. The reason is that I wanted to make POST and GET requests dead simple. Here’s how you’d do a POST request (and the same would work with a GET request):   The first parameter is extra data passed to the post request and the second parameter is a function that handles the success of the POST request. If you’re familiar with jQuery’s Ajax goodness, you’ll know how to use it. (if not, check out http://api.jquery.com/jQuery.Post/ and the parameters are essentially the same). But we still haven’t gotten rid of the magic strings. We still have controller names and action names represented as strings. This is going to blow your mind… If you’ve seen T4MVC, this will look familiar. We’re essentially doing the same sort of thing with my JavaScript router, but we’re porting the concept to JavaScript. The good news is that parameters to the controllers are directly reflected in the action function, just like T4MVC. And the even better news… IntlliSense is easily transferred to the JavaScript version if you’re using Visual Studio as your JavaScript editor. The additional data parameter gives you the ability to pass extra routing data to the URL formatter.   About the Magic You may be wondering how this all work. It’s actually quite simple. I’ve built a simple jQuery pluggin (called routeManager) that hangs off the main jQuery namespace and routes all the URLs. Every time your solution builds, a routing file will be generated with this pluggin, all your route and controller definitions along with your documentation. Then by the power of Visual Studio, you get some really slick IntelliSense that is hard to live without. But there are a few steps you have to take before this whole thing is going to work. First and foremost, you need a reference to the JsRouting.Core.dll to your projects containing controllers or routes. Second, you have to specify your routes in a bit of a non-standard way. See, we can’t just pull routes out of your App_Start in your Global.asax. We force you to build a route source like this: The way we determine the routes is by pulling in all RouteSources and generating routes based upon the mapped routes. There are various reasons why we can’t use RouteCollection (different post for another day)… but in this case, you get the same route mapping experience. Converting the RouteSource to a RouteCollection is trivial (there’s an extension method for that). Next thing you have to do is generate a documentation XML file. This is done by going to the project settings, going to the build tab and clicking the checkbox. (this isn’t required, but nice to have). The final thing you need to do is hook up the generation mechanism. Pop open your project file and look for the AfterBuild step. Now change the build step task to look like this: The “PathToOutputExe” is the path to the JsRouting.Output.exe file. This will change based on where you put the EXE. The “PathToOutputJs” is a path to the output JavaScript file. The “DicrectoryOfAssemblies” is a path to the directory containing controller and routing DLLs. The JsRouting.Output.exe executable pulls in all these assemblies and scans them for controllers and route sources.   Now that wasn’t too bad, was it :)   The State of the Project This is definitely not complete… I have a lot of plans for this little project of mine. For starters, I need to look at the generation mechanism. Either I will be creating a utility that will do the project file manipulation or I will go a different direction. I’d like some feedback on this if you feel partial either way. Another thing I don’t support currently is areas. While this wouldn’t be too hard to support, I just don’t use areas and I wanted something up quickly (this is, after all, for a current project of mine). I’ll be adding support shortly. There are a few things that I haven’t covered in this post that I will most certainly be covering in another post, such as routing constraints and how these will be translated to JavaScript. I decided to open source this whole thing, since it’s a nice little utility I think others should really be using. Currently we’re using ASP.NET MVC 2, but it should work with MVC 3 as well. I’ll upgrade it as soon as MVC 3 is released. Along those same lines, I’m investigating how this could be put on the NuGet feed. Show me the Bits! OK, OK! The code is posted on my GitHub account. Go nuts. Tell me what you think. Tell me what you want. Tell me that you hate it. All feedback is welcome! https://github.com/zowens/ASP.NET-MVC-JavaScript-Routing

    Read the article

  • XBRL US Conference Highlights

    - by john.orourke(at)oracle.com
    Back in early November I had an opportunity to attend the XBRL US National Conference in Philadelphia.  At the event, XBRL US announced that Oracle had joined the initiative, so I had a chance to participate in a press conference and attend a number of sessions.  Oracle joined XBRL US so we can stay ahead of the standard and leverage it in our products, and to help drive awareness with customers and improve adoption of XBRL. There were roughly 250 attendees at the event, about half of which were vendors and consultants and the rest financial reporting staff from corporate filers.  Event sponsors included Ernst & Young, SWIFT and Fujitsu.  There were also a number of XBRL technology and service providers exhibiting at the conference.  On Monday Nov. 8th, the XBRL US Steering Committee meetings and Annual Members meeting and reception were held.  At the Annual Members meeting the big news was that current XBRL US President, Mark Bolgiano, is moving to a new position at Howard Hughes Medical Center.  Campbell Pryde, who had led the Taxonomy Development for XBRL US, is taking over as XBRL US President. Other items that were highlighted at the members meeting included: The US GAAP XBRL taxonomy is being used by over 1500 SEC filers and has now been handed over to the FASB to maintain and enhance 16 filer training events were held in 2010 XBRL Global Magazine was launched Corporate Actions proposal was submitted to the SEC with SWIFT in May XBRL Labs for iPhone, XBRL US Consistency Suite launched ISO 2022 Corporate Actions Alignment with XBRL achieved The XBRL Credit Rating taxonomy was accepted Tuesday Nov. 9th included Keynotes, General Sessions, Innovation Workshop for Governments and Securities Professionals, and an Opening Reception.  General sessions included: Lessons Learned from the SEC's rollout of XBRL.  More than 18,000 errors were identified in reviews of filings between June 2009 and September 2010.  Most of these related to negative values being used where they shouldn't have.  Also, the SEC feels there are too many taxonomy extensions being created - mostly in the Cash Flow Statements.  They emphasize using existing elements in the US GAAP taxonomy and advise filers not to  create extensions to improve the visual formatting of XBRL filings. Investors and XBRL - Setting the Standard for Data Quality.  In this panel discussion, the key learning was that CFA's, academics and the financial community are not using XBRL as expected.  The issues raised include the  accuracy and completeness of filings, number of taxonomy extensions, and limited number of tools available to help analyze XBRL data.  Another big issue that was raised is the lack of historic results in XBRL - most analysts need 10 quarters of historic data.  On the positive side, XBRL has the potential to eliminate re-keying of data and errors here and can improve analytic capabilities for financial analysts once more historic data is available and more companies are providing detailed tagging of their filings. A US Roadmap for XBRL Financial Reporting.  This was a panel discussion featuring Jeff Neumann(SEC), Campbell Pryde(XBRL US), and Louis Matherne(FASB).  Key points included the fact that XBRL is currently used by 1500 companies, with 8000 more companies coming in 2011.  XBRL for Mutual Fund Reporting will start in 2011 for 8000 funds, and a Credit Rating Taxonomy has now been submitted for review.  The XBRL tagging/filing process is improving each quarter - more education is helping here.  The FASB is looking at extensions to date, and potential additions to US GAAP taxonomy, while the SEC is evaluating filings for accuracy, consistency in tagging, and tools for analyzing data.  The big news is that the FASB 2011 US GAAP Taxonomy has been completed and reviewed by SEC.  The 2011 US GAAP Taxonomy supports new FASB accounting standards issued since 2009, has new taxonomy elements for certain industries (i.e airlines) and the elimination of 500 concepts.  (meaning they can't be used going forward but are still supported for historical comparison)  The 2011 US GAAP Taxonomy will be available for usage with Q2 2011 SEC filings.  More information about this can be found on the FASB web site.  http://www.fasb.org/home Accounting Firms and XBRL.  This session covered the Role of Audit Firms, which includes awareness and education, validation of XBRL filings, and in-house transition planning.  The main advice provided was that organizations should document XBRL mapping process, perform peer comparisons, and risk assessments on a regular basis. Wednesday Nov. 10th included more Keynotes, General Sessions on Corporate Actions, and XBRL Essentials Workshop Training for corporate filers.  The XBRL Essentials Training included: Getting Started Once you Have the Basics Detailed Footnote Tagging and Handling Tables Quality Control and Trust in the XBRL Process Bringing XBRL In-House:  What are the Options, What should you consider? The US GAAP Financial Reporting Taxonomy - Overview of the 2011 release The XBRL Essentials Training was well-attended with about 80 people.  This included a good overview of the SEC's XBRL mandate, limited liability issue, tagging levels, recommended planning process, internal vs. outsourced approach, and how to manage service providers.  I learned a lot from the session on detailed tagging.  This is the requirement that kicks in during a company's second year of XBRL filing with the SEC and applies to financial statements, footnotes and disclosures (it does not apply to MD&A, executive communications and other information).  The review of the Linkbase model, or dimensional table structure, was very interesting and can be complex to understand.  The key takeaway here is that using dimensional tables in XBRL filings can help limit the number of taxonomy extensions that are required.  The slides from this session are posted on the XBRL US web site. (http://xbrl.us/events/Pages/archive.aspx) For me, the main summary points and takeaways from the XBRL US conference are: XBRL for financial reporting has turned the corner and gone mainstream - with 1500 companies currently using it and 8000 more coming in 2011 The expected value is not being achieved by filers or consumers of XBRL data - this will improve when more companies are filing in XBRL, more history is available, and more software tools are available for analysis (hmm, sounds like an opportunity for Oracle) XBRL is becoming the global standard for all business communications beyond just the financials - i.e. adoption for mutual funds, corporate actions and others planned for the future If you would like to learn more about XBRL and the various training programs, services and software tools that are available check out the XBRL US web site and even better - become a member.  Here's a link:  http://xbrl.us/Pages/default.aspx

    Read the article

  • CodePlex Daily Summary for Sunday, March 28, 2010

    CodePlex Daily Summary for Sunday, March 28, 2010New ProjectsFeed Tracker: Feed Tracker allows you to track your favorite feeds (RSS 2.0 and Atom 1.0) and open them up directly in your browser.FIM 2010 Resource Management Client: The Forefront Identity Management 2010 Resource Management Client is a library to communicate with the FIM 2010 web service. The development langu...Infection Protection: A game about controlling disease outbreak in a city. Developed for OGPC 2010, using Qt.OrthoLab: Homepage of Orthocone open-source laboratory.Paragliding ThermalMarker: Paragliding / Hanggliding Windows Application that receives waypoint files and returns only the thermals that get triggered more often in a place.RSSFalls: RssFalls makes it easier for developers to download RSS or Podcast enclosures.String Library for C++ Language: StrLib++ is a string library for C++ language. for now it support only ANSI strings, later Unicode support will added for UT8, UTF16 and UTF32 for...Sweeper: Sweeper is a Visual Studio 2008 add-in for C# that takes care of many of the trivial code-formatting issues that developers run into - particularly...System.Common: A .Net library that provides methods, properties and more that the .Net Framework doesn't provide.Tiveriad: The framework is designed to help you more easily build modular Windows applicationT-Shirts Online: Online shop build in Silverlight 4 using DIBS as payment module.New ReleasesArkSwitch: ArkSwitch v1.1.3: This release has some important changes. Thanks to MichyPrima for helping with some of the code. 1. Improved theming to more easily support multip...Catharsis: Catharsis 2.5 on catarsa.com: The Catharsis framework has finally its own portal http://catarsa.com The latest release version is 2.5 - string names of properties are not any ...EffiProz - A Pure C# Database: EffiProz CF 1.0: EffiProz for .Net compact framework.Encrypted Notes: Encrypted Notes 1.6: This is the latest version of Encrypted Notes (1.6). It has an installer - it will create a directory 'CPascoe' in My Documents. Once you have ext...Extend SmallBasic: Teaching Extensions v.009: Added Pentagon Crazy Recipe QuizGapi.NET - .NET (C#) wrapper for Google API: Gapi.NET 0.5.0.0: - Fixed some minor bugs. - Add minor features. - Performance improvement. See code check-ins for detailed informationHouseFly experimental controls: HouseFly experimental control: Alpha version of HouseFly experimental controlsiTuner - The iTunes Companion: iTuner 1.2.3738 Beta 2: V1.2 allows you to synchronize one or more iTunes playlists to a USB MP3 player. Beta 2 resolves all known issues. This continues the evolution ye...jQuery Library for SharePoint Web Services: SPServices 0.5.4: IMPORTANT NOTE: This release is in an alpha state. You should only download it if you know what you are getting and are interested in testing it f...JSINQ - LINQ to Objects for JavaScript: JSINQ 1.0: This is the first stable release of JSINQ. It is fully compatible with the 0.9 beta release. It contains the following new features: Now supports ...MSBuild Mercurial Tasks: 1.0.0 Beta: First release of the application. This version integrates all the basic functionalities of Mercurial as defined in the Use Case 1.Open Portal Foundation: Open Portal Foundation V1.4.2: What's news? noscript template was updated naming convention for layout autogenerated controls now use the "master" prefix. The documentation ce...Open Portal Foundation: Open Portal Foundation V1.4.4: What's news? ASP .NET Master page support for custom aspx integrated pages New usercontrols for ASCX, ASPX and Master page integration : Link: f...Paint.NET PSD Plugin: 1.5.0: RLE compression is now working fully on save. File sizes are now competitive with Photoshop's. Saving takes about twice as long with RLE compressi...Paragliding ThermalMarker: ThermalMarker_Alfa0.1: Release Alfa 1Simple Service Locator: Simple Service Locator v0.7: The Simple Service Locator is an easy-to-use Inversion of Control library that is a complete implementation of the Common Service Locator interface...String Library for C++ Language: Release 0.9: version 0.9 beta release DO NOT USE IN SERIOUS PROJECTS this release use default application heap, and because visual studio is using special debug...Sweeper: Sweeper Alpha 1: SweeperA Visual Studio Add-in for C# Code Formatting - Visual Studio 2008 Includes: A UI for options, Enable or disable any specific task you want ...T-Shirts Online: 1.0: First release of the online shop.Twilio Server Library for .NET (TSL.NET): v0.1.0 Beta: This is the first release of TSL.NET. This v0.1.0 release is a Beta. Subsequent builds will be posted as v0.1.x and release-candidate Betas will be...Vr30 OS: Facebook 1.0: Connect you to Facebook without your web browser.Vr30 OS: SkyBlog 1.0: SkyBlog without web browser.Vr30 OS: YouTube 1.0: Youtube without web browserWeb Image Resize Handler: Web Image Resize, Zoom, Rotate and Greyscale v.1.0: Efficient Web Image Resize, Zoom, Rotate and Greyscale cacheing handler for ASP.Net.WinXound: WinXound 3.3.0 Beta 1 for Mac OsX: This is the first Beta release for Apple Mac OsX (Universal Binary). DEBUG HELP NEEDED ! Please signal bugs, suggestions or feedback to: stefano_b...Most Popular ProjectsMetaSharpRawrWBFS ManagerASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesManaged Extensibility FrameworkBlogEngine.NETMicrosoft Biology Foundationpatterns & practices: Composite WPF and SilverlightLINQ to TwitterFarseer Physics EngineTable2ClassNB_Store - Free DotNetNuke Ecommerce Catalog Module

    Read the article

  • CodePlex Daily Summary for Sunday, March 11, 2012

    CodePlex Daily Summary for Sunday, March 11, 2012Popular ReleasesSubExtractor: Release 1026: Fix: multi-colored bluray subs will no longer result in black blob for OCR Fix: dvds with no language specified will not cause exception in name creation of subtitle files Fix: Root directory Dvds will use volume label as their directory nameExtensions for Reactive Extensions (Rxx): Rxx 1.3: Please read the latest release notes for details about what's new. Related Work Items Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many wrappers that convert asynchronous Framework Class Library APIs into observables. Many useful types such as ListSubject<T>, DictionarySubject<T>, CommandSubject, ViewModel, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T>, Scala...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.47: Properly output escaped characters in CSS identifiers throw an EOF error when parsing a CSS selector that doesn't end in a declaration block chased down a stack-overflow issue with really large JS sources. Needed to flatten out the AST tree for adjacent expression statements that the application merges into a single expression statement, or that already contain large, comma-separated expressions in the original source. fix issue #17569: tie together the -debug switch with the DEBUG defi...Player Framework by Microsoft: Player Framework for Windows 8 Metro (BETA): Player Framework for HTML/JavaScript and XAML/C# Metro Style Applications.WPF Application Framework (WAF): WAF for .NET 4.5 (Experimental): Version: 2.5.0.440 (Experimental): This is an experimental release! It can be used to investigate the new .NET Framework 4.5 features. The ideas shown in this release might come in a future release (after 2.5) of the WPF Application Framework (WAF). More information can be found in this dicussion post. Requirements .NET Framework 4.5 (The package contains a solution file for Visual Studio 11) The unit test projects require Visual Studio 11 Professional Changelog All: Upgrade all proje...SSH.NET Library: 2012.3.9: There are still few outstanding issues I wanted to include in this release but since its been a while and there are few new features already I decided to create a new release now. New Features Add SOCKS4, SOCKS5 and HTTP Proxy support when connecting to remote server. For silverlight only IP address can be used for server address when using proxy. Add dynamic port forwarding support using ForwardedPortDynamic class. Add new ShellStream class to work with SSH Shell. Add supports for mu...EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v2.1: Changelog Fixed template file access issue on Win7. Fix on configuration load when target project was not found and "Use project default namespace" was checked. Minor fix on loading latest configuration at startup. Minor fix in VisualStudioHelper class. DTO's properties accessors are now in one line. Improvements in PropertyHelper to get a cleaner and more performant code. Added Website project type as a not supported project type. Using Error List pane from VS IDE to show Enti...DotNetNuke® Community Edition CMS: 06.01.04: Major Highlights Fixed issue with loading the splash page skin in the login, privacy and terms of use pages Fixed issue when searching for words with special characters in them Fixed redirection issue when the user does not have permissions to access a resource Fixed issue when clearing the cache using the ClearHostCache() function Fixed issue when displaying the site structure in the link to page feature Fixed issue when inline editing the title of modules Fixed issue with ...Mayhem: Mayhem Developer Preview: This is the developer preview of Mayhem. Enjoy!Magelia WebStore Open-source Ecommerce software: Magelia WebStore 1.2: Medium trust compliant lot of small change for medium trust compliance full refactoring of user management refactoring of Client Refactoring of user management Magelia.WebStore.Client no longer reference Magelia.WebStore.Services.Contract Refactoring page category multi parent category added copy category feature added Refactoring page catalog copy catalog feature added variant management improvement ability to define a default variant for a variable product ability to ord...PDFsharp - A .NET library for processing PDF: PDFsharp and MigraDoc Foundation 1.32: PDFsharp and MigraDoc Foundation 1.32 is a stable version that fixes a few bugs that were found with version 1.31. Version 1.32 includes solutions for Visual Studio 2010 only (but it should be possible to add the project files to existing solutions for VS 2005 or VS 2008). Users of VS 2005 or VS 2008 can still download version 1.31 with the solutions for those versions that allow them to easily try the samples that are included. While it may create smaller PDF files than version 1.30 because...Mag-tools, Asherons Call Decal Plugin: Mag-SuitBuilder 1.0.0.1: This is a standalone windows application that can help you put together a suit of armor.Ruminate XNA 4.0 GUI: Release 1.0.7: Fixed multiple issues with the layout and input system. Fixed Scrollbars. Introduced new layout system that will be further utilized in future updates.FaST-LMM: FActored Spectrally Transformed Linear Mixed Models: FaSTLMM v1.07 Binaries for Windows and Linux: These files contain the files necessary to run FaSTLMM on Windows or Linux along with the license and users manual. To download FaSTLMM source code, please follow the changeset link located above to the Source Code tab. The FaSTLMM.Win.zip download contains both C++ and CSharp executable versions of FaSTLMM. No installer is required, just UnZip the file into a directory and run from there. Or put the installation directory on your path and run it from anywhere. The C++ version included r...Terminals: Version 2.0 - Release: Changes since version 1.9a:New art works New usability in Organize favorites window Improved usability of imports/exports and scans Large number of fixes Improvements in single instance mode Comparing November beta 4, this corrects: New application icons Doesn't show Logon error codes Fixed command line arguments exception for single instance mode Fixed detaching of tabs improved usability in detached window Fixed option settings for Capture manager Fixed system tray noti...MFCMAPI: March 2012 Release: Build: 15.0.0.1032 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeTortoiseHg: TortoiseHg 2.3.1: bugfix releaseSense/Net CMS - Enterprise Content Management: SenseNet 6.0.8 Community Edition: Sense/Net 6.0.8 Community EditionMain new features:send emails to lists and libraries localize the UI with WYSIWYG string resource editor define allowed child types on content types. Our new release brings the most new features and optimizations in the history of Sense/Net Community Edition. Alongside the biggest features detailed below in this release you will find features like uploading or copy-pasting images, security enhancements, customizable login processes, customizable notificati...CommonLibrary: Code: CodePowerGUI Visual Studio Extension: PowerGUI VSX 1.5.2: Added support for PowerGUI 3.2.New ProjectsCRFSharp: CRFSharp is Conditional Random Fields implemented by .NET(C#), a machine learning algorithm for learning from labeled sequences of examples. It is widely used in Natural Language Process (NLP) tasks, for example: word breaker, postaging, named entity recognized and so on.Custom MsBuild Tasks: An attempt to write a custom task for MsBuild. Needed a task to remove comments from web.config. Downr: Downr is a super simple UI which forces the computer to shutdown after a certain time of the day. Included is a .ADMX and a .ADML file for controlling Downr through group policies.Excel Report: Easiest way to create reports in Microsoft Excel XML format using XML data and XSLThcr38550: hcr3850 TESTModular MediaStreamSource: Modular MediaStreamSource project. paidmailclicker: .Pivottable web part: Provide a highly configurable AJAX PivotTable for Display purposes across webs or across sites. SharePoint YouTube Video Web Part Suite: The available Web Parts helps you to integarte Videos from YouTube into your SharePoint site. In contrast to the out of the box Media Web part, the new Web Parts are designed especial for YouTube videos. Connect your YouTube channel and choose the videos you want to see.ShareTest: This C# project offers a small lightweight framework (and also guidance) on how it's possible to test SharePoint using selenium in a reusable and clean way. The project follows the "Page Object" design pattern, so that instead of having to parse css, ids, xpath etc, directly in your test cases, you can now deal with c# page objects to make testing more readable and reusable. Note! This project is only one week old and I am actively using it to test DocRead, so I will refine and improve as ...Simeranya Project: Simeranya ProjectSlime Keeper: A game where you buy and sell slimes. They tend to multiply on their own using simple genetics!SunamoBlogConverter: The program for converting export formats between Wordpress and Blogger with further work with them. The program converts yet only posts without comments and pages. The program was tested on parse my blog with 1,450 posts. Essential parts of the program is in EN,remaining in CS.webpart: Free webparts for Sharepoint 2007 and 2010WPF Shapes: A library of ready to use WPF shapes, such as hexagons, speech bubbles, triangles etc.YoutubeExtractor: YoutubeExtractor is a library for .NET, written in C#, to extract the download link from YouTube videos, download them, and/or extract their audio track. It is based on the youtubeFisher project (http://youtubefisher.codeplex.com/) and aims to create an API instead of a GUI application.??? "??????": ?????? ??? ???????????????? ??????: ??????????? ???????? ?????? ???????????? ??????

    Read the article

  • Need personal advice on how to get out of a company..

    - by SOfan
    Hi, I am an SO user since past 6 months and this is the first time I am turning to SO for personal help. I have asked technical questions before with my real ID. I am stuck inside a service based IT company for the past one year and haven't been able to decide if to leave it, when to leave it and how to leave it. I had taken 2 weeks LWP on medical reason roughly at end of 1 year and then soon after reporting, I applied for 2 months more LWP (on medical/personal ground) with the intention of working on my health,take up a hobby class to ward off depression,pessimism, to have some fun in life, and to look for a job which I really would be excited about - that interests me and which matches with my strength. My leave starts from this Monday. So in any case, I had hard set in mind that I will leave the company after I join them back hopefully with some job offer already in hand (after figuring out what I want do). Neither I can stand the past project,past colleagues,company, HR, pathetically low salary. But if I really listen to my heart, I don't want to have to go back to that office after my sabbatical and again have to see those people. I will have to resign it after my sabbatical ends. Then HR people perhaps wont like it, may even accuse me on face or behind back that primary purpose of my leave must have been to hunt for a better job and I lied about medical and person reasons. Also, if they get nasty and force me to serve 2 months notice period. There is no way I see myself after sabbatical resuming in old project or starting new work. It will be a pain. Since they have already approved 2 months leave and stuff, ideally if they want, they should be just able to relieve me right on the next day after I join back. But, I don't know if they want to get nasty, will they mention about my 2 months sabbatical leave in my experience letter or more scary, the term medical/personal reason. I have hard earned my experience here, have worked against my will, mostly it has been painful and slogged like anything, because I realize the importance of work experience in IT industry. I don't have greed to have those 2 months included extra in my experience letter, but I don't want to mess up with my experience letter in a way which makes my next employer ask question, get suspicious, or be wary if I have any medical reason going on. Being an emotional,moody person or somebody who can't be in an environment, once my mind and heart starts hating it. I think it perhaps is best, if I resign on Monday itself telling them (in polite manner) something that look I took sabbatical for some reason but I don't want to resume working in the company after my sabbatical ends. So please accept my resignation. Now tell me what you want to do about my leave request, my notice period and when you are willing to relieve me. What should I write and how? Some background: I am working in an IT company in India.I am overqualified in the company. It is grossly underpaying me. My education qualifications far exceed anyone's in the whole company being a CS undergrad as well as a CS grad. I joined this company after finishing the grad. I had self-doubts about my skills and interest as a programmer. I like doing research oriented work, though didn't have any particular success during grad. My life here has been very hectic. The project containing many many sub-projects has kept me on my toes and I have never really liked the work. I have been playing against my strength. Also the company strict internet usage policy (you can't read gmails, can't browse any non-work related sites not even news). When working for a client, from the machine we can't even check company related emails.For this one has to go to kiosk like 5 machines in a small room etc. Most of the times those machines are not available, so it was not unusual to keep making rounds to these kiosk machines to check company emails, browse company related emails etc.So it was not so easy to keep in touch with company related basic affairs for a not particular careful person. Things like this which are new to me, make me feel restricted. I am an undecisive person with a sense of failure, self-doubt, not meeting up unrealistic expectation. Somewhere at back of mind, I envy my classmates who make a smooth transition from company to company without causing any gap in their resume. I on other hand have gaps in resume. I get tired after working in a place for sometime. problem with colleagues in general. I am not particular great with people, have few friends, not known for a fun nature, rather serious, scholar. I am not a typical conventional female. I think females are usually more disciplined. But I am not so. I reach office late (though after informing manager). I don't want to blame them entirely, because from my past, it is not unusual for me to get undecisive on things. Also I had doubts about my ability as researched and to succeed there. of building a relationship in a group, to have something to talk about, newspaper. I get cut-off from people. peer pressure. I make blunders in coding, lose patience. Consciously or unconsciously I feel contempt for people here, work here, environment here. I have doubts that either I go to a place which does innovation, does research oriented work, product biggies, have great motivated people, have competent people passionate about products they are building. But then I also doubt my ability to survive there. I have identified that an idea job for me would be 4 days a week, a high salary job. When among people in company/team, I can't think much. I need some time at home to read good authentic books written in good style on what work I am doing.So that I am comfortable with my understanding of work. I get into pressure easily under deadline and need 5th day to cool myself off. I took for 2 weeks leave, because each day was hell for me. May be the depression phase of bipolar is on and also partially it could be that being a work centered person, who derives happiness,self-esteem from work, haven't been enjoying work and have been working for the sole person of proving stability, and ability to stick, against all odds, and facing what challenges I see, bonding with people, identifying opportunities to learn in given task etc.have been averaging one day LWP in 1 week or 10 days. or may be because of my nature,ADD,not being able to switch context,out of touch with news, don't have a circle of friends with who I enjoy. less knowledge in general to talk about, just some technical stuff.anyway, so due to emotional reason, some practical reason etc, I wanted to be very sure before leaving. So my leave starts from Monday and I should feel happy about it. I have taken the leave to for a few purposes - to take care of my health by regular yoga/exercise (with project on, I just can't do anything regular), reassess myself to see what I want to try next which work I might like, look for next job, take up a hobby which I like say singing. I am not clear on my career,job aspiration. I have tried my hands on research. During this year appraisal yesterday, I even had some conflict with my last manager. In meeting with me one on one, he would say all nice things about me, but in feedback to new manager, he hasn't given any excellent feedback. It is all only good. I am angry at this old Manager. Also new manager also scolded me as I didn't agree to his appraisal and waited to hear myself from old Manager. He kind of scolded me for wasting his time. Am I being unethical somewhere? I am always very conscious of if I am cheating anywhere. What advice I am seeking? How to resign and what to write in resignation letter

    Read the article

  • Variant Management– Which Approach fits for my Product?

    - by C. Chadwick
    Jürgen Kunz – Director Product Development – Oracle ORACLE Deutschland B.V. & Co. KG Introduction In a difficult economic environment, it is important for companies to understand the customer requirements in detail and to address them in their products. Customer specific products, however, usually cause increased costs. Variant management helps to find the best combination of standard components and custom components which balances customer’s product requirements and product costs. Depending on the type of product, different approaches to variant management will be applied. For example the automotive product “car” or electronic/high-tech products like a “computer”, with a pre-defined set of options to be combined in the individual configuration (so called “Assembled to Order” products), require a different approach to products in heavy machinery, which are (at least partially) engineered in a customer specific way (so-called “Engineered-to Order” products). This article discusses different approaches to variant management. Starting with the simple Bill of Material (BOM), this article presents three different approaches to variant management, which are provided by Agile PLM. Single level BOM and Variant BOM The single level BOM is the basic form of the BOM. The product structure is defined using assemblies and single parts. A particular product is thus represented by a fixed product structure. As soon as you have to manage product variants, the single level BOM is no longer sufficient. A variant BOM will be needed to manage product variants. The variant BOM is sometimes referred to as 150% BOM, since a variant BOM contains more parts and assemblies than actually needed to assemble the (final) product – just 150% of the parts You can evolve the variant BOM from the single level BOM by replacing single nodes with a placeholder node. The placeholder in this case represents the possible variants of a part or assembly. Product structure nodes, which are part of any product, are so-called “Must-Have” parts. “Optional” parts can be omitted in the final product. Additional attributes allow limiting the quantity of parts/assemblies which can be assigned at a certain position in the Variant BOM. Figure 1 shows the variant BOM of Agile PLM. Figure 1 Variant BOM in Agile PLM During the instantiation of the Variant BOM, the placeholders get replaced by specific variants of the parts and assemblies. The selection of the desired or appropriate variants is either done step by step by the user or by applying pre-defined configuration rules. As a result of the instantiation, an independent BOM will be created (Figure 2). Figure 2 Instantiated BOM in Agile PLM This kind of Variant BOM  can be used for „Assembled –To-Order“ type products as well as for „Engineered-to-Order“-type products. In case of “Assembled –To-Order” type products, typically the instantiation is done automatically with pre-defined configuration rules. For „Engineered- to-Order“-type products at least part of the product is selected manually to make use of customized parts/assemblies, that have been engineered according to the specific custom requirements. Template BOM The Template BOM is used for „Engineered-to-Order“-type products. It is another type of variant BOM. The engineer works in a flexible environment which allows him to build the most creative solutions. At the same time the engineer shall be guided to re-use existing solutions and it shall be assured that product variants of the same product family share the same base structure. The template BOM defines the basic structure of products belonging to the same product family. Let’s take a gearbox as an example. The customer specific configuration of the gearbox is influenced by several parameters (e.g. rpm range, transmitted torque), which are defined in the customer’s requirement document.  Figure 3 shows part of a Template BOM (yellow) and its relation to the product family hierarchy (blue).  Figure 3 Template BOM Every component of the Template BOM has links to the variants that have been engineeried so far for the component (depending on the level in the Template BOM, they are product variants, Assembly Variant or single part variants). This library of solutions, the so-called solution space, can be used by the engineers to build new product variants. In the best case, the engineer selects an existing solution variant, such as the gearbox shown in figure 3. When the existing variants do not fulfill the specific requirements, a new variant will be engineered. This new variant must be compliant with the given Template BOM. If we look at the gearbox in figure 3  it must consist of a transmission housing, a Connecting Plate, a set of Gears and a Planetary transmission – pre-assumed that all components are must have components. The new variant will enhance the solution space and is automatically available for re-use in future variants. The result of the instantiation of the Template BOM is a stand-alone BOM which represents the customer specific product variant. Modular BOM The concept of the modular BOM was invented in the automotive industry. Passenger cars are so-called „Assembled-to-Order“-products. The customer first selects the specific equipment of the car (so-called specifications) – for instance engine, audio equipment, rims, color. Based on this information the required parts will be determined and the customer specific car will be assembled. Certain combinations of specification are not available for the customer, because they are not feasible from technical perspective (e.g. a convertible with sun roof) or because the combination will not be offered for marketing reasons (e.g. steel rims with a sports line car). The modular BOM (yellow structure in figure 4) is defined in the context of a specific product family (in the sample it is product family „Speedstar“). It is the same modular BOM for the different types of cars of the product family (e.g. sedan, station wagon). The assembly or single parts of the car (blue nodes in figure 4) are assigned at the leaf level of the modular BOM. The assignment of assembly and parts to the modular BOM is enriched with a configuration rule (purple elements in figure 4). The configuration rule defines the conditions to use a specific assembly or single part. The configuration rule is valid in the context of a type of car (green elements in figure 4). Color specific parts are assigned to the color independent parts via additional configuration rules (grey elements in figure 4). The configuration rules use Boolean operators to connect the specifications. Additional consistency rules (constraints) may be used to define invalid combinations of specification (so-called exclusions). Furthermore consistency rules may be used to add specifications to the set of specifications. For instance it is important that a car with diesel engine always is build using the high capacity battery.  Figure 4 Modular BOM The calculation of the car configuration consists of several steps. First the consistency rules (constraints) are applied. Resulting from that specification might be added automatically. The second step will determine the assemblies and single parts for the complete structure of the modular BOM, by evaluating the configuration rules in the context of the current type of car. The evaluation of the rules for one component in the modular BOM might result in several rules being fulfilled. In this case the most specific rule (typically the longest rule) will win. Thanks to this approach, it is possible to add a specific variant to the modular BOM without the need to change any other configuration rules.  As a result the whole set of configuration rules is easy to maintain. Finally the color specific assemblies respective parts will be determined and the configuration is completed. Figure 5 Calculated Car Configuration The result of the car configuration is shown in figure 5. It shows the list of assemblies respective single parts (blue components in figure 5), which are required to build the customer specific car. Summary There are different approaches to variant management. Three different approaches have been presented in this article. At the end of the day, it is the type of the product which decides about the best approach.  For „Assembled to Order“-type products it is very likely that you can define the configuration rules and calculate the product variant automatically. Products of type „Engineered-to-Order“ ,however, need to be engineered. Nevertheless in the majority of cases, part of the product structure can be generated automatically in a similar way to „Assembled to Order“-tape products.  That said it is important first to analyze the product portfolio, in order to define the best approach to variant management.

    Read the article

  • Debugging HTML & JavaScript with Firebug

    - by MattDiPasquale
    I made a JSONP widget. However, when one of the partner sites put it in their page, (1) it doesn't render at all in IE and (2) in other browsers (Firefox & Google Chrome), the HTML of the widget renders incorrectly: the <aside> closes prematurely, before the Financial Aid Glossary. It's something specific to that page because it works fine on this example college resource center page. To fix these two issues, I tried saving the page source to a local file and messing around with the local file and with Firebug, deleting DOM elements and stuff. I even tried fixing the errors that The W3C Markup Validation Service found. But, I still couldn't get it to render correctly. How should I tell them to change their page so that the widget renders correctly? Or, how should I update the widget script I wrote? They may take their page down since it's not rendering correctly, so here's the source of the page just in case: <!DOCTYPE html> <html> <head id="ctl01_Head1" profile="New Jersey Credit Union League"><title> College Resource Center - New Jersey Credit Union League </title> <link rel='stylesheet' type='text/css' href='http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.6/themes/base/jquery.ui.all.css' /> <link rel='stylesheet' type='text/css' href='/csshandler.ashx?skin=InnerTemplate&amp;s=1&amp;v=2.3.5.8' /> <!--[if IE]> <script defer="defer" src="http://njcul.org/ClientScript/html5.js" type="text/javascript"></script> <![endif]--> <!--[if lt IE 7]> <link rel="stylesheet" href="http://njcul.org/Data/Sites/1/skins/InnerTemplate/IESpecific.css?cb=9d546eec-6752-4067-8f94-9a5b642213e4" type="text/css" id="IE6CSS" /> <![endif]--> <!--[if IE 7]> <link rel="stylesheet" href="http://njcul.org/Data/Sites/1/skins/InnerTemplate/IE7Specific.css?cb=9d546eec-6752-4067-8f94-9a5b642213e4" type="text/css" id="IE7CSS" /> <![endif]--> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="search" type="application/opensearchdescription+xml" title="New Jersey Credit Union League" href="http://njcul.org/SearchEngineInfo.ashx" /> <!--[if IE]> <meta http-equiv="Page-Enter" content="blendTrans(Duration=0)" /><meta http-equiv="Page-Exit" content="blendTrans(Duration=0)" /> <![endif]--> <meta name="viewport" content="width=670, initial-scale=0.45, minimum-scale=0.45" /> <link rel='shortcut icon' href='http://njcul.org/Data/Sites/1/skins/InnerTemplate/favicon.ico' /> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js" type="text/javascript" ></script> <script src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.6/jquery-ui.min.js" type="text/javascript" ></script> <script type="text/javascript"> <!-- function MM_swapImgRestore() { //v3.0 var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; } function MM_preloadImages() { //v3.0 var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array(); var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++) if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}} } function MM_findObj(n, d) { //v4.01 var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);} if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document); if(!x && d.getElementById) x=d.getElementById(n); return x; } function MM_swapImage() { //v3.0 var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3) if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];} } //--> </script> <link href="App_Themes/pageskin/theme.css" type="text/css" rel="stylesheet" /> <link rel='canonical' href='http://njcul.org/college-resource-center.aspx' /><style type="text/css"> .ctl01_SiteMenu1_ctl00_0 { background-color:white;visibility:hidden;display:none;position:absolute;left:0px;top:0px; } .ctl01_SiteMenu1_ctl00_1 { text-decoration:none; } .ctl01_SiteMenu1_ctl00_2 { } .ctl01_PageMenu1_ctl01_0 { background-color:white;visibility:hidden;display:none;position:absolute;left:0px;top:0px; } .ctl01_PageMenu1_ctl01_1 { text-decoration:none; } .ctl01_PageMenu1_ctl01_2 { } .ctl01_PageMenu2_ctl01_0 { text-decoration:none; } </style></head> <body class="pagebody" onLoad="MM_preloadImages('ps_menu_down.png')"> <form method="post" action="/college-resource-center.aspx" onsubmit="javascript:return WebForm_OnSubmit();" id="aspnetForm"> <div> <input type="hidden" name="ctl01_ScriptManager1_HiddenField" id="ctl01_ScriptManager1_HiddenField" value="" /> <input type="hidden" name="__EVENTTARGET" id="__EVENTTARGET" value="" /> <input type="hidden" name="__EVENTARGUMENT" id="__EVENTARGUMENT" value="" /> <input type="hidden" name="__VIEWSTATEFIELDCOUNT" id="__VIEWSTATEFIELDCOUNT" value="45" /> <input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="/wEPDwUKMjA1OTAyNzk1MQ9kFgJmD2QWBAIBDxYCHgdwcm9maWxlBR5OZXcgSmVyc2V5IENyZWRpdCBVbmlvbiBMZWFndWVkAgMP" /> <input type="hidden" name="__VIEWSTATE1" id="__VIEWSTATE1" value="ZBYiAgEPFgIeD1NpdGVNYXBQcm92aWRlcgUJbW9qb3NpdGUxZAIDDxYEHwEFCW1vam9zaXRlMR4PU3RhcnRpbmdOb2RlVXJsBQt+" /> <input type="hidden" name="__VIEWSTATE2" id="__VIEWSTATE2" value="L2hvbWUuYXNweGQCBQ8WBB8BBQltb2pvc2l0ZTEfAgUYfi9lZHVjYXRpb24tLWV2ZW50cy5hc3B4ZAIHDxYCHwEFCW1vam9zaXRl" /> <input type="hidden" name="__VIEWSTATE3" id="__VIEWSTATE3" value="MWQCFQ8PFgIeB1Zpc2libGVoZGQCGw9kFgJmDw8WAh8DaGQWBgIBDxYCHwNoFgJmDw8WAh4EVGV4dAULU2l0ZSBTZWFyY2hkZAID" /> <input type="hidden" name="__VIEWSTATE4" id="__VIEWSTATE4" value="Dw8WAh8DaGRkAgUPDxYCHwNoZGQCIQ8PFgIfA2hkZAInD2QWAgIBDw8WAh8DaGRkAi0PZBYGAgEPDxYCHghJbWFnZVVybAUrL0Rh" /> <input type="hidden" name="__VIEWSTATE5" id="__VIEWSTATE5" value="dGEvU2l0ZXMvMS9za2lucy9Jbm5lclRlbXBsYXRlL2hlYWQxLmpwZ2RkAgMPDxYCHwUFKy9EYXRhL1NpdGVzLzEvc2tpbnMvSW5u" /> <input type="hidden" name="__VIEWSTATE6" id="__VIEWSTATE6" value="ZXJUZW1wbGF0ZS9oZWFkMi5qcGdkZAIFDw8WAh8FBSsvRGF0YS9TaXRlcy8xL3NraW5zL0lubmVyVGVtcGxhdGUvaGVhZDMuanBn" /> <input type="hidden" name="__VIEWSTATE7" id="__VIEWSTATE7" value="ZGQCLw9kFgRmDw8WAh8DaGRkAgQPDxYCHwNoZGQCMQ8PFgQeCENzc0NsYXNzBTlhcnQtbGF5b3V0LWNlbGwgYXJ0LXNpZGViYXIx" /> <input type="hidden" name="__VIEWSTATE8" id="__VIEWSTATE8" value="IGxlZnRzaWRlIGxlZnQyY29sdW1uIGNtc3pvbmUeBF8hU0ICAmQWBAIBD2QWAgICD2QWAmYPZBYCAgEPZBYCZhA8KwAJAgAPFhIe" /> <input type="hidden" name="__VIEWSTATE9" id="__VIEWSTATE9" value="FENvbGxhcHNlSW1hZ2VUb29sVGlwBRNDb2xsYXBzZSB0aGlzIG5vZGUuHg1QYXRoU2VwYXJhdG9yBHweC0V4cGFuZERlcHRoZh4S" /> <input type="hidden" name="__VIEWSTATE10" id="__VIEWSTATE10" value="RXhwYW5kSW1hZ2VUb29sVGlwBRFFeHBhbmQgdGhpcyBub2RlLh4SU2hvd0V4cGFuZENvbGxhcHNlZx4NTmV2ZXJFeHBhbmRlZGQe" /> <input type="hidden" name="__VIEWSTATE11" id="__VIEWSTATE11" value="C18hRGF0YUJvdW5kZx4XUG9wdWxhdGVOb2Rlc0Zyb21DbGllbnRnHgxEYXRhU291cmNlSUQFEGxldmVsM2RhdGFzb3VyY2VkCBQr" /> <input type="hidden" name="__VIEWSTATE12" id="__VIEWSTATE12" value="AAsFPzA6MCwwOjEsMDoyLDA6MywwOjQsMDo1LDA6NiwwOjcsMTo3LDA6NywwOjgsMTo4LDA6OCwxOjgsMDo4LDA6ORQrAAIWDB8E" /> <input type="hidden" name="__VIEWSTATE13" id="__VIEWSTATE13" value="BRJDYWxlbmRhciBvZiBFdmVudHMeBVZhbHVlBSQyMmU3NmVlZC1iZWM0LTRjNWItYWJhNC04MTVjNTJmNTJiNDQeC05hdmlnYXRl" /> <input type="hidden" name="__VIEWSTATE14" id="__VIEWSTATE14" value="VXJsBRl+L2NhbGVuZGFyLW9mLWV2ZW50cy5hc3B4HghEYXRhUGF0aAUCNjceCURhdGFCb3VuZGceEFBvcHVsYXRlT25EZW1hbmRo" /> <input type="hidden" name="__VIEWSTATE15" id="__VIEWSTATE15" value="ZBQrAAIWDB8EBRBDaGFwdGVyIE1lZXRpbmdzHxEFJGNiZGUyMTFhLTc0YzItNDI2Zi05NjQ4LTQ5NTY2ZjY4NjViNx8SBRd+L2No" /> <input type="hidden" name="__VIEWSTATE16" id="__VIEWSTATE16" value="YXB0ZXItbWVldGluZ3MuYXNweB8TBQI2OB8UZx8VaGQUKwACFgwfBAUOU3BlY2lhbCBFdmVudHMfEQUkODgxZjE0Y2EtMWI0NC00" /> <input type="hidden" name="__VIEWSTATE17" id="__VIEWSTATE17" value="YjYxLWE2YmQtMjk2Mzc0NzMyZGY1HxIFFX4vc3BlY2lhbC1ldmVudHMuYXNweB8TBQI2OR8UZx8VZ2QUKwACFgwfBAUURWR1Y2F0" /> <input type="hidden" name="__VIEWSTATE18" id="__VIEWSTATE18" value="aW9uYWwgU2Vzc2lvbnMfEQUkM2QxYTBmZWUtMTk1Ny00MGYwLThlMzItNzEzMjM4ZDM5Yjg5HxIFG34vZWR1Y2F0aW9uYWwtc2Vz" /> <input type="hidden" name="__VIEWSTATE19" id="__VIEWSTATE19" value="c2lvbnMuYXNweB8TBQI3MB8UZx8VZ2QUKwACFgwfBAUsU3BlY2lhbCBDVSBEaXJlY3RvciAmYW1wOyBWb2x1bnRlZXIgUHJvZ3Jh" /> <input type="hidden" name="__VIEWSTATE20" id="__VIEWSTATE20" value="bXMfEQUkMGRjNWUwY2EtMWQyNy00N2JlLTgwMjgtNmYzY2Q2NmNjNTkzHxIFLX4vc3BlY2lhbC1jdS1kaXJlY3Rvci12b2x1bnRl" /> <input type="hidden" name="__VIEWSTATE21" id="__VIEWSTATE21" value="ZXItcHJvZ3JhbXMuYXNweB8TBQMxNjgfFGcfFWhkFCsAAhYMHwQFG0NVTkEgTGVhcm5pbmcgT3Bwb3J0dW5pdGllcx8RBSQyZTRl" /> <input type="hidden" name="__VIEWSTATE22" id="__VIEWSTATE22" value="YWYyMS0wNjEwLTQ5OWYtYTVmMy1lN2VlNjM2ZWZiMmUfEgUifi9jdW5hLWxlYXJuaW5nLW9wcG9ydHVuaXRpZXMuYXNweB8TBQI2" /> <input type="hidden" name="__VIEWSTATE23" id="__VIEWSTATE23" value="Nh8UZx8VaGQUKwACFgwfBAUrWW91dGggSW52b2x2ZW1lbnQgQm9hcmQgU2Nob2xhcnNoaXAgUHJvZ3JhbR8RBSRjNjUzMjQwNC1k" /> <input type="hidden" name="__VIEWSTATE24" id="__VIEWSTATE24" value="OTY1LTQ4ZmYtYTZhNC02YmFkYjU4ZDE0YTAfEgUKfi95aWIuYXNweB8TBQI5Nh8UZx8VaGQUKwACFgwfBAUbRXhlY3V0aXZlIExl" /> <input type="hidden" name="__VIEWSTATE25" id="__VIEWSTATE25" value="YWRlcnNoaXAgU2VyaWVzHxEFJDE0MTg2ZTUzLWI4MWMtNDIzOS1iMDM5LWY5N2U2ZTI2ZDU4OR8SBQp+L2Vscy5hc3B4HxMFAzEy" /> <input type="hidden" name="__VIEWSTATE26" id="__VIEWSTATE26" value="OR8UZx8VaGQUKwACFgwfBAUUQ2VydGlmaWNhdGUgUHJvZ3JhbXMfEQUkNjMxYWFkMzctY2NhZS00OTFhLWE3YjAtODI3NzM5YWM1" /> <input type="hidden" name="__VIEWSTATE27" id="__VIEWSTATE27" value="NjZhHxIFGn4vY2VydGlmaWNhdGVwcm9ncmFtcy5hc3B4HxMFAzE1Mx8UZx8VZ2QUKwACFhAfBAUXQ29sbGVnZSBSZXNvdXJjZSBD" /> <input type="hidden" name="__VIEWSTATE28" id="__VIEWSTATE28" value="ZW50ZXIfEQUkOTI3NDJkM2QtZTYzYS00OTg2LTgwMTYtYjNkNjlhNWU5NzA3HxIFHn4vY29sbGVnZS1yZXNvdXJjZS1jZW50ZXIu" /> <input type="hidden" name="__VIEWSTATE29" id="__VIEWSTATE29" value="YXNweB8TBQMxNjYfFGceCFNlbGVjdGVkZx8VaB4IRXhwYW5kZWRnZAUPY3RsMDEkY3RsMDZ8bm5uZAIDDw8WAh8DaGRkAjMPDxYE" /> <input type="hidden" name="__VIEWSTATE30" id="__VIEWSTATE30" value="HwYFNWFydC1sYXlvdXQtY2VsbCBhcnQtY29udGVudCBjZW50ZXItbGVmdG1hcmdpbiBjbXN6b25lHwcCAmQWBgIBD2QWAmYPDxYE" /> <input type="hidden" name="__VIEWSTATE31" id="__VIEWSTATE31" value="HwYFC2JyZWFkY3J1bWJzHwcCAmQWAgIBDzwrAAUBAA8WBh4VUGFyZW50TGV2ZWxzRGlzcGxheWVkAgIfCQUDID4gHwNnZBYGZg9k" /> <input type="hidden" name="__VIEWSTATE32" id="__VIEWSTATE32" value="FgICAQ8PFggfEgUKL2hvbWUuYXNweB8EBQRIb21lHwYFD3Vuc2VsZWN0ZWRjcnVtYh8HAgJkZAICD2QWAgIBDw8WCB8SBRcvZWR1" /> <input type="hidden" name="__VIEWSTATE33" id="__VIEWSTATE33" value="Y2F0aW9uLS1ldmVudHMuYXNweB8EBRZFZHVjYXRpb24gJmFtcDsgRXZlbnRzHwYFD3Vuc2VsZWN0ZWRjcnVtYh8HAgJkZAIED2QW" /> <input type="hidden" name="__VIEWSTATE34" id="__VIEWSTATE34" value="AgIBDw8WCB8SBR0vY29sbGVnZS1yZXNvdXJjZS1jZW50ZXIuYXNweB8EBRdDb2xsZWdlIFJlc291cmNlIENlbnRlch8GBQ1zZWxl" /> <input type="hidden" name="__VIEWSTATE35" id="__VIEWSTATE35" value="Y3RlZGNydW1iHwcCAmRkAgMPDxYCHwNoZGQCBQ9kFgJmD2QWAmYPDxYEHwYFCW1vZHVsZTI0MR8HAgJkFgICAQ9kFgICAw9kFgIC" /> <input type="hidden" name="__VIEWSTATE36" id="__VIEWSTATE36" value="Aw9kFgICAQ8PFgQeC0NvbnRlbnRHdWlkKClYU3lzdGVtLkd1aWQsIG1zY29ybGliLCBWZXJzaW9uPTIuMC4wLjAsIEN1bHR1cmU9" /> <input type="hidden" name="__VIEWSTATE37" id="__VIEWSTATE37" value="bmV1dHJhbCwgUHVibGljS2V5VG9rZW49Yjc3YTVjNTYxOTM0ZTA4OSRmOWU3YTZiYy1lYjYzLTQ0YzQtOGQyYS1hYTEyMmZmMTJh" /> <input type="hidden" name="__VIEWSTATE38" id="__VIEWSTATE38" value="YTMfA2hkFgICAQ9kFgJmD2QWBAIFD2QWAmYPFgIeCkNhbGxiYWNrSUQFKWN0bDAxJG1haW5Db250ZW50JGN0bDAwJFJhdGluZyRV" /> <input type="hidden" name="__VIEWSTATE39" id="__VIEWSTATE39" value="c2VyUmF0aW5nZAIHDxYCHxEFJGY5ZTdhNmJjLWViNjMtNDRjNC04ZDJhLWFhMTIyZmYxMmFhM2QCNQ8PFgYfBgURcmlnaHRzaWRl" /> <input type="hidden" name="__VIEWSTATE40" id="__VIEWSTATE40" value="IGNtc3pvbmUfBwICHwNoZGQCNw8PFgQfBgUTYWx0Y29udGVudDIgY21zem9uZR8HAgJkZAI5Dw8WBB8GBRNhbHRjb250ZW50MiBj" /> <input type="hidden" name="__VIEWSTATE41" id="__VIEWSTATE41" value="bXN6b25lHwcCAmRkAj0PDxYCHwNoZBYKAgEPDxYCHwNoZGQCAw8PFgIfA2hkZAIFDw8WAh8DaGRkAgcPDxYCHwNoZGQCCQ8PFgIf" /> <input type="hidden" name="__VIEWSTATE42" id="__VIEWSTATE42" value="A2hkZAJBDw8WAh8DaGRkGAMFHl9fQ29udHJvbHNSZXF1aXJlUG9zdEJhY2tLZXlfXxYBBRVjdGwwMSRQYWdlTWVudTIkY3RsMDEF" /> <input type="hidden" name="__VIEWSTATE43" id="__VIEWSTATE43" value="FWN0bDAxJFBhZ2VNZW51MSRjdGwwMQ8PZAUkY2E4YTRkMmQtYWZkMy00ZGQ2LWIxYzEtYWY0MjhiOTc4ZThjZAUVY3RsMDEkU2l0" /> <input type="hidden" name="__VIEWSTATE44" id="__VIEWSTATE44" value="ZU1lbnUxJGN0bDAwDw9kBSQ2ZWU5NzFjZC05OTU2LTRkYzMtODE2Mi1hNDg4NDEzZTdmNThk" /> </div> <script type="text/javascript"> //<![CDATA[ var theForm = document.forms['aspnetForm']; if (!theForm) { theForm = document.aspnetForm; } function __doPostBack(eventTarget, eventArgument) { if (!theForm.onsubmit || (theForm.onsubmit() != false)) { theForm.__EVENTTARGET.value = eventTarget; theForm.__EVENTARGUMENT.value = eventArgument; theForm.submit(); } } //]]> </script> <script src="/WebResource.axd?d=x2eneDuLFQ9w4yRoi8Y5tg2&amp;t=634230536572508135" type="text/javascript"></script> <script type="text/javascript">var GB_ROOT_DIR = '/ClientScript/greybox/'; var GBCloseText = 'Close'; </script> <script src="/ClientScript/mojocombined/mojocombinedfull.js" type="text/javascript" ></script> <script src="/ClientScript/jqmojo/cycle.js" type="text/javascript" ></script> <script src="/ScriptResource.axd?d=wCo0V0P8aplVAKjdc-kM9AvNmwrQFDA24wrkA7OkI6gOYp_VxxHWIc8VlP8L0l200&amp;t=fffffffff615adfd" type="text/javascript"></script> <script type="text/javascript"> //<![CDATA[ Sys.Services._AuthenticationService.DefaultWebServicePath = 'Authentication_JSON_AppService.axd'; Sys.Services._RoleService.DefaultWebServicePath = 'Role_JSON_AppService.axd'; //]]> </script> <script src="/ScriptResource.axd?d=wCo0V0P8aplVAKjdc-kM9AvNmwrQFDA24wrkA7OkI6gjdZ5z-Kq5dVZ7FGYv9jU40&amp;t=fffffffff615adfd" type="text/javascript"></script> <script type="text/javascript"> //<![CDATA[ function WebForm_OnSubmit() { document.getElementById('ctl01_ctl06').value = GetViewState__AspNetTreeView('ctl01_PageMenu2_ctl01_UL'); return true; } //]]> </script> <script type="text/javascript"> //<![CDATA[ Sys.WebForms.PageRequestManager._initialize('ctl01$ScriptManager1', document.getElementById('aspnetForm')); Sys.WebForms.PageRequestManager.getInstance()._updateControls(['tctl01$PageMenu1$upMenu','tctl01$PageMenu2$upMenu'], [], [], 90); //]]> </script> <div id="wrapwebsite"> <img src="top.png" border="0" width="900" height="36"> <div class="topnav"> <ul> <li class="firstnav"><a class="sitelink homelink" href="/">Home</a></li> <li class="topnavitem"><a class="sitelink" href="/SiteMap.aspx">Site Map</a></li> <li class='topnavitem'><a href='/SearchResults.aspx' class='sitelink'>Search</a></li> <li class="topnavitem"><a class="sitelink" href="/Secure/Login.aspx">Sign In</a></li> </ul> <a href='#startcontent' class='skiplink'>Skip over navigation</a> <div id="ctl01_pnlStandardLogin" class="floatpanel"> </div> <div class="addthis"> <div id="ctl01_InsecurePanel1" class="addthisbutton"> </div> </div> </div> <div id="topmenu"> <div class="AspNet-Menu-Horizontal" id="ctl01_SiteMenu1_ctl00"> <ul class="AspNet-Menu"> <li class="AspNet-Menu-Leaf AspNet-Menu-SelectedLeaf"> <a href="/home.aspx" class="AspNet-Menu AspNet-Menu-SelectedLeaf"> <img src="Data/SiteImages/FeatureIcons/house.png" alt="Home" /> Home</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/professional-products-and-services.aspx" class="AspNet-Menu"> Professional Products and Services</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/news-publications-announcements.aspx" class="AspNet-Menu"> News, Publications &amp; Announcements</a> </li> </ul> </div> </div> <div id="wrapheader"> <a href="/default.aspx"><img src="logo.png" border="0" width="420" height="104" align="left"></a> <a href="Secure/Login.aspx" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('memberLogin','','ps_menu_down2.png',1)"><img src="ps_menu_up2.png" alt="Member Login" name="memberLogin" width="171" height="20" border="0" style="padding-left:270px; padding-top:0px;"></a><br /> <!--<a href="products-and-services.aspx" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('productsServices','','ps_menu_down.png',1)"><img src="ps_menu_up.png" alt="Access Products & Services" name="productsServices" width="171" height="20" border="0" style="padding-left:95px;"></a>--> <a href="professional-products-and-services.aspx"><img src="productServicesNav.jpg" border="0" width="203" height="37" style="padding-left:200px; padding-top:54px;"></a> <!-- <h1 class='art-Logo-name art-logo-name siteheading'><a class='siteheading' href='http://njcul.org/Default.aspx'>New Jersey Credit Union League</a></h1> <div id="ctl01_spanel1" class="rotatecontainer"> <img id="ctl01_imgs1" class="rotateitem" src="/Data/Sites/1/skins/InnerTemplate/head1.jpg" alt=" " style="border-width:0px;" /> <img id="ctl01_imgs2" class="rotateitem" src="/Data/Sites/1/skins/InnerTemplate/head2.jpg" alt=" " style="border-width:0px;" /> <img id="ctl01_imgs3" class="rotateitem" src="/Data/Sites/1/skins/InnerTemplate/head3.jpg" alt=" " style="border-width:0px;" /> </div> --> </div> <div id="outercontainer"> <div id="ctl01_PageMenu1_upMenu"> <div class="AspNet-Menu-Horizontal" id="ctl01_PageMenu1_ctl01"> <ul class="AspNet-Menu"> <li class="AspNet-Menu-Leaf"> <a href="/consumer-advocacy.aspx" class="AspNet-Menu"> Consumer Advocacy</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/compliance.aspx" class="AspNet-Menu"> Compliance</a> </li> <li class="AspNet-Menu-Leaf AspNet-Menu-SelectedLeaf"> <a href="/education--events.aspx" class="AspNet-Menu AspNet-Menu-SelectedLeaf"> Education &amp; Events</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/government-affairs.aspx" class="AspNet-Menu"> Government Affairs</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/news.aspx" class="AspNet-Menu"> News</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/about-us.aspx" class="AspNet-Menu"> About Us</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/nj-credit-union-foundation.aspx" class="AspNet-Menu"> Foundation </a> </li> </ul> </div> </div> <div id="innercontainer"> <div id="wrapcenter"> <div id="ctl01_divLeft" class="art-layout-cell art-sidebar1 leftside left2column cmszone"> <div id="gutter"> <div id="ctl01_PageMenu2_upMenu"> <div class="AspNet-TreeView" id="ctl01_PageMenu2_ctl01"> <ul id="ctl01_PageMenu2_ctl01_UL"> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf"> <a href="/calendar-of-events.aspx"> Calendar of Events</a> </li> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf"> <a href="/chapter-meetings.aspx"> Chapter Meetings</a> </li> <li class="AspNet-TreeView-Root"> <a class="AspNet-TreeView-Expand" onclick="__doPostBack('ctl01$PageMenu2$ctl01','p881f14ca-1b44-4b61-a6bd-296374732df5'); return false;" href="/special-events.aspx" title="Expand this node.">&nbsp;</a> <a href="/special-events.aspx"> Special Events</a> </li> <li class="AspNet-TreeView-Root"> <a class="AspNet-TreeView-Expand" onclick="__doPostBack('ctl01$PageMenu2$ctl01','p3d1a0fee-1957-40f0-8e32-713238d39b89'); return false;" href="/educational-sessions.aspx" title="Expand this node.">&nbsp;</a> <a href="/educational-sessions.aspx"> Educational Sessions</a> </li> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf"> <a href="/special-cu-director-volunteer-programs.aspx"> Special CU Director &amp; Volunteer Programs</a> </li> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf"> <a href="/cuna-learning-opportunities.aspx"> CUNA Learning Opportunities</a> </li> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf"> <a href="/yib.aspx"> Youth Involvement Board Scholarship Program</a> </li> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf"> <a href="/els.aspx"> Executive Leadership Series</a> </li> <li class="AspNet-TreeView-Root"> <a class="AspNet-TreeView-Expand" onclick="__doPostBack('ctl01$PageMenu2$ctl01','p631aad37-ccae-491a-a7b0-827739ac566a'); return false;" href="/certificateprograms.aspx" title="Expand this node.">&nbsp;</a> <a href="/certificateprograms.aspx"> Certificate Programs</a> </li> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf AspNet-TreeView-Selected"> <a href="/college-resource-center.aspx"> College Resource Center</a> </li> </ul> </div> </div> </div> <!----> <a id="startcontent"></a> </div> <div id="ctl01_divCenter" class="art-layout-cell art-content center-leftmargin cmszone"> <div id="ctl01_Breadcrumbs_pnlWrapper" class="breadcrumbs"> <span id="ctl01_Breadcrumbs_breadCrumbsControl"><span> <a id="ctl01_Breadcrumbs_breadCrumbsControl_ctl00_lnkNode" class="unselectedcrumb" href="/home.aspx">Home</a> </span><span> > </span><span> <a id="ctl01_Breadcrumbs_breadCrumbsControl_ctl02_lnkNode" class="unselectedcrumb" href="/education--events.aspx">Education &amp; Events</a> </span><span> > </span><span> <a id="ctl01_Breadcrumbs_breadCrumbsControl_ctl04_lnkCurrent" class="selectedcrumb" href="/college-resource-center.aspx">College Resource Center</a> </span></span> </div> <div id="ctl01_mainContent_ctl00_pnlContainer" class="module241"> <div id="ctl01_mainContent_ctl00_pnlWrapper" class="art-Post-inner panelwrapper htmlmodule"> <a id='module241' class='moduleanchor'></a><h2 class="art-PostHeader moduletitle">CUStudentLoans.org College Resource Center <a class="ModuleEditLink"></a></h2> <div class=" modulecontent"> <div id="ctl01_mainContent_ctl00_divContent" class="slidecontainer"> <style> /* Edit the font family and width of overall content */ #cusl-page { font-family: 'Lucida Grande', Lucida, Arial, sans-serif; font-size: 62.5%; width: 630px; } /* Link colors */ #cusl-page a { color: #004a80; } /* Header image */ #cusl-page #header { display:none !important; } /* Heading text color */ #cusl-content h2 { color: #0e6c55; font-size:18px; } #cusl-page aside h3 a { font-size:16px } #cusl-page aside h2 { font-size:18px; } #cusl-content article h3 a { font-size:20px; line-height:26px !important; } </style> <script src="https://www.custudentloans.org/javascripts/cusl-page.js"></script> <script> new CUSL.Page({ count: 5, // defaults to 7 cu_url: 'http://www.custudentloans.org' }).render(); </script> <div id="footer"> <p><a target="_blank" href="http://www.custudentloans.org/student/college-financing-101">Learn more about Private Student Loans at <em>Ken's Korner</em></a></p> </div> </div> </div> <div class="modulefooter"></div> <div class="cleared"></div> </div> </div> </div> </div> <div id="ctl01_divAlt1" class="altcontent2 cmszone"> </div> <div id="ctl01_divAltContent2" class="altcontent2 cmszone"> </div> <div id="wrapfooter"> <img src="footerImage.png" border="0" width="900" height="134"> &copy; 2008 - 2011 New Jersey Credit Union League | <a href="/privacy-policy.aspx">Privacy Policy</a> | Design and Website by: <a href="http://www.greylockmarketing.com/" target="_blank">Greylock Marketing</a> & <a href="http://www.socialboostmedia.com/" target="_blank">Social Boost Media</a> <br /> <br /> </div> </div> </div> </div> <script type="text/javascript"> function HideMenuToolbar(){ $("#toolbar").fadeOut(); $("#toolbarbut").fadeIn("slow");} function ShowMenuToolbar(){ $("#toolbar").fadeIn(); $("#toolbarbut").fadeOut("slow");} $(document).ready(function(){ $("span.downarr a").click(function() {HideMenuToolbar(); Set_Cookie('openstate', 'closed')}); $("span.showbar a").click(function() {ShowMenuToolbar(); Set_Cookie('openstate', 'open') }); $("span.downarr a, span.showbar a").click(function() { return false; }); var openState = Get_Cookie('openstate'); if(openState != null){ if(openState == 'closed'){HideMenuToolbar();} if(openState == 'open'){ShowMenuToolbar();}} }); </script> <div> <input type="hidden" name="ctl01$ctl06" id="ctl01_ctl06" /> </div> <div> <input type="hidden" name="__EVENTVALIDATION" id="__EVENTVALIDATION" value="/wEWBQKv1e3VCALs75XzDgL+qaz3AwLv26TNCQKS/MC2Dg==" /> </div> <script type="text/javascript">Sys.Application.add_load(function() { var form = Sys.WebForms.PageRequestManager.getInstance()._form; form._initialAction = form.action = window.location.href; }); </script> <script type="text/javascript"> //<![CDATA[ (function() {var fn = function() {$get("ctl01_ScriptManager1_HiddenField").value = '';Sys.Application.remove_init(fn);};Sys.Application.add_init(fn);})(); WebForm_InitCallback();//]]> </script> <script type="text/javascript" > $('div.mojo-accordion').accordion({fx:{opacity:'toggle',duration:'fast'}}); $('div.mojo-accordion-nh').accordion({fx:{opacity:'toggle',duration:'fast'},autoHeight:false}); $('div.mojo-tabs').tabs({fx:{opacity:'toggle',duration:'fast'}}); $('input.jqbutton').button(); </script> <script type="text/javascript">$('#ctl01_spanel1').cycle({fx:'fade',speed:1000,timeout:3000,next:'#ctl01_spanel1'});</script> <script type="text/javascript"> var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); </script> <script type="text/javascript"> try{ var mojoPageTracker = _gat._getTracker("UA-19333588-1"); mojoPageTracker._setCustomVar(1, "member-type", "anonymous", 1);mojoPageTracker._trackPageview(); } catch(err) {} </script> <script type="text/javascript"> //<![CDATA[ Sys.Application.initialize(); //]]> </script> </form> </body> </html>

    Read the article

  • What’s New from the Oracle Marketing Cloud at Oracle OpenWorld 2014?

    - by Richard Lefebvre
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Marketing—CX Central is your hub for all things Marketing related at OpenWorld in San Francisco, September 28-October 2, 2014. Learn how to personalize the modern marketing journey to improve customer loyalty. We’re hosting more than 60 breakout sessions, half of which will highlight customer success stories from marquee brands including Bizo, Comcast, Dell, Epson, John Deere, Lane Bryant, ReadyTalk and Shutterfly. Moscone West, Levels 2 and 3 To learn more about how modern marketing works, visit Moscone West, levels 2 and 3, for exciting demos of each of the Oracle Marketing Cloud solutions (BlueKai, Compendium, Eloqua, Push I/O, and Responsys). You also can check out our stations for Vertical Marketing Best Practices, the Markie Awards, and more! CX Spotlight Sessions “Accelerating Big Profits in Big Data,” Jeff Tanner, Baylor University “Using Content Marketing to Impact Every Stage of the Buyer’s Journey,” Jennifer Agustin, Bizo “Expanding Your Marketing with Proven Testing and Optimization,” Brian Border, Shutterfly and Matthew Balthazor, Epson “Modern Marketing: The New Digital Dialogue,” Cory Treffiletti, Oracle A Special Marquee Session Dell’s Hayden Mugford will speak on “The Digital Ecosystem: Driving Experience Through Contact Engagement.” She will highlight how the organization built a digital ecosystem that supports a behaviorally driven, multivehicle nurturing campaign. The Dell 1:1 Global Marketing team worked with multiple partners to innovate integrations with Oracle Eloqua, Oracle Real-Time Decisions for real-time decision logic, and a content management system (CMS) that enables 100 percent customized e-mails. The program doubled average order values for nurtured contacts versus non-nurtured and tripled open and click-through rates versus push e-mail. Other Oracle Marketing Cloud Session Highlights Thought leadership by role Exploring the benefits of moving to the Cloud Product line roadmaps and innovations in Marketing Technical deep dives for product lines within Marketing Best practices and impactful business measurements Solutions that are Integrated across CX Target Audience Session content is geared toward professionals in Marketing, Marketing Operations, Marketing Demand Generation, Social: Chief Marketing Officers, Vice Presidents, Directors and Managers. Outcomes Customers attending Marketing—CX Central @ OpenWorld will be able to: Gain insight into delivering consistent cross-channel marketing Discover how to provide the right information to the right customer at the right time and with the right channel Get answers to burning questions and advice on business challenges Hear from other Oracle customers about recommended best practices to help their organization move forward Network and share ideas to help create a strategy for connecting with customers in better ways It Wouldn’t Be an Oracle Marketing Cloud Event Without a Party! We’re hosting CX Central Fest:  a unique customer experience specifically designed for attendees of CX Central. It will include a chance to rock out at a private concert featuring Los Angeles indie electronic pop group, Capital Cities! Join us Tuesday, September 30 from 7-9 p.m. OpenWorld is a fabulous way for your customers to see all that Oracle Marketing Cloud has to offer. Pass on an invitation today. By Laura Vogel (Oracle) /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • June 26th Links: ASP.NET, ASP.NET MVC, .NET and NuGet

    - by ScottGu
    Here is the latest in my link-listing series.  Also check out my Best of 2010 Summary for links to 100+ other posts I’ve done in the last year. [I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET Introducing new ASP.NET Universal Providers: Great post from Scott Hanselman on the new System.Web.Providers we are working on.  This release delivers new ASP.NET Membership, Role Management, Session, Profile providers that work with SQL Server, SQL CE and SQL Azure. CSS Sprites and the ASP.NET Sprite and Image Optimization Library: Great post from Scott Mitchell that talks about a free library for ASP.NET that you can use to optimize your CSS and images to reduce HTTP requests and speed up your site. Better HTML5 Support for the VS 2010 Editor: Another great post from Scott Hanselman on an update several people on my team did that enables richer HTML5 editing support within Visual Studio 2010. Install the Ajax Control Toolkit from NuGet: Nice post by Stephen Walther on how you can now use NuGet to install the Ajax Control Toolkit within your applications.  This makes it much easier to reference and use. May 2011 Release of the Ajax Control Toolkit: Another great post from Stephen Walther that talks about the May release of the Ajax Control Toolkit. It includes a bunch of nice enhancements and fixes. SassAndCoffee 0.9 Released: Paul Betts blogs about the latest release of his SassAndCoffee extension (available via NuGet). It enables you to easily use Sass and Coffeescript within your ASP.NET applications (both MVC and Webforms). ASP.NET MVC ASP.NET MVC Mini-Profiler: The folks at StackOverflow.com (a great site built with ASP.NET MVC) have released a nice (free) profiler they’ve built that enables you to easily profile your ASP.NET MVC 3 sites and tune them for performance.  Globalization, Internationalization and Localization in ASP.NET MVC 3: Great post from Scott Hanselman on how to enable internationalization, globalization and localization support within your ASP.NET MVC 3 and jQuery solutions. Precompile your MVC Razor Views: Great post from David Ebbo that discusses a new Razor Generator tool that enables you to pre-compile your razor view templates as assemblies – which enables a bunch of cool scenarios. Unit Testing Razor Views: Nice post from David Ebbo that shows how to use his new Razor Generator to enable unit testing of razor view templates with ASP.NET MVC. Bin Deploying ASP.NET MVC 3: Nice post by Phil Haack that covers a cool feature added to VS 2010 SP1 that makes it really easy to \bin deploy ASP.NET MVC and Razor within your application. This enables you to easily deploy the app to servers that don’t have ASP.NET MVC 3 installed. .NET Table Splitting with EF 4.1 Code First: Great post from Morteza Manavi that discusses how to split up a single database table across multiple EF entity classes.  This shows off some of the power behind EF 4.1 and is very useful when working with legacy database schemas. Choosing the Right Collection Class: Nice post from James Michael Hare that talks about the different collection class options available within .NET.  A nice overview for people who haven’t looked at all of the support now built into the framework. Little Wonders: Empty(), DefaultIfEmpty() and Count() helper methods: Another in James Michael Hare’s excellent series on .NET/C# “Little Wonders”.  This post covers some of the great helper methods now built-into .NET that make coding even easier. NuGet NuGet 1.4 Released: Learn all about the latest release of NuGet – which includes a bunch of cool new capabilities.  It takes only seconds to update to it – go for it! NuGet in Depth: Nice presentation from Scott Hanselman all about NuGet and some of the investments we are making to enable a better open source ecosystem within .NET. NuGet for the Enterprise – NuGet in a Continuous Integration Automated Build System: Great post from Scott Hanselman on how to integrate NuGet within enterprise build environments and enable it with CI solutions. Hope this helps, Scott

    Read the article

  • Oracle Internet Directory 11gR1 11.1.1.6 Certified with E-Business Suite

    - by Elke Phelps (Oracle Development)
    Oracle E-Business Suite comes with native user authentication and management capabilities out-of-the-box. If you need more-advanced features, it's also possible to integrate it with Oracle Internet Directory and Oracle Single Sign-On or Oracle Access Manager, which allows you to link the E-Business Suite with third-party tools like Microsoft Active Directory, Windows Kerberos, and CA Netegrity SiteMinder.  For details about third-party integration architectures, see either of these article for EBS 11i and 12: In-Depth: Using Third-Party Identity Managers with E-Business Suite Release 12 In-Depth: Using Third-Party Identity Managers with the E-Business Suite Release 11i Oracle Internet Directory 11.1.1.6 is now certified with Oracle E-Business Suite Release 11i, 12.0 and 12.1.  OID 11.1.1.6 is part of Oracle Fusion Middleware 11g Release 1 Version 11.1.1.6.0, also known as FMW 11g Patchset 5.  Certified E-Business Suite releases are: EBS Release 11i 11.5.10.2 + ATG PH.H RUP 7 and higher EBS Release 12.0.6 and higher EBS Release 12.1.1 and higher Supported Configurations Oracle Internet Directory 11.1.1.5.0 can be integrated with two single sign-on solutions for EBS environments: Oracle Internet Directory and Directory Integration Platform from Fusion Middleware 11gR1 Patchset 5 (11.1.1.6.0) with Oracle Access Manager 10g (10.1.4.3) with an existing Oracle E-Business Suite system (Release 11i or 12.1.x). Oracle Internet Directory and Directory Integration Platform from Fusion Middleware 11gR1 Patchset 5 (11.1.1.6.0) with Oracle Access Manager 11gR1 (11.1.1.5) with an existing Oracle E-Business Suite system (Release 12.0.6 or higher or 12.1.x). Oracle Internet Directory (OID) and Directory Integration Platform (DIP) from Oracle Fusion Middleware 11gR1 Patchset 5  (11.1.1.6.0) with Oracle Single Sign-On Server and Oracle Delegated Administration Services Release 10g (10.1.4.3.0) with an existing Oracle E-Business Suite system (Release 11i, 12.0.6 or 12.1.x) Oracle Access Manager strongly recommended Oracle has two single sign-on solutions: Oracle Single Sign-On Server (OSSO) and Oracle Access Manager (OAM). Oracle strongly recommends that all new single sign-on implementations use Oracle Access Manager. Oracle Access Manager is the preferred solution going forward, and forms the basis of Oracle Fusion Middleware 11g. OSSO is no longer being actively developed and will not be ported to Oracle WebLogic Server. Platform certifications Oracle Internet Directory is certified to run on any operating system for which Oracle WebLogic Server 11g is certified. Refer to the Oracle Fusion Middleware 11g System Requirements for more details.For information on operating systems supported by Oracle Internet Directory and its components, refer to the Oracle Identity and Access Management 11gR1 certification matrix.Integration with Oracle Internet Directory involves components spanning several different suites of Oracle products. There are no restrictions on which platform any particular component may be installed so long as the platform is supported for that component.References Overview of Single Sign-On Integration Options for Oracle E-Business Suite Note 1388152.1 Using the Latest Oracle Internet Directory 11gR1 Patchset with Oracle Single Sign-on and Oracle E-Business Suite (Note 876539.1) Integrating Oracle E-Business Suite with Oracle Access Manager 11g using Oracle E-Business Suite AccessGate (Note 1309013.1) Integrating Oracle E-Business Suite with Oracle Access Manager 10g using Oracle E-Business Suite AccessGate (Note 975182.1) Migrating Oracle Single Sign-On 10gR3 to Oracle Access Manager 11g with Oracle E-Business Suite (Note 1304550.1) Oracle Fusion Middleware Download, Installation & Configuration Readme Oracle Fusion Middleware Installation Guide for Oracle Identity Management 11g Release 1 (11.1.1) (Part Number E12002-09) Oracle Fusion Middleware Upgrade Guide for Oracle Identity Management 11g Release 1 (11.1.1) (Part Number E10129-09) Oracle Fusion Middleware Upgrade Planning Guide 11g Release 1 (11.1.1) (Part Number E10125-06) Oracle Fusion Middleware Patching Guide 11g Release 1 (11.1.1) (Part Number E16793-12) Related Articles Understanding Options for Integrating Oracle Access Manager with E-Business Suite In-Depth: Using Third-Party Identity Managers with E-Business Suite Release 12 In-Depth: Using Third-Party Identity Managers with the E-Business Suite Release 11i Oracle Access Manager 10gR3 Certified with E-Business Suite Portal 11.1.1.4 Certified with E-Business Suite Discoverer 11.1.1.4 Certified with E-Business Suite

    Read the article

< Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >