Search Results

Search found 16544 results on 662 pages for 'sys path'.

Page 189/662 | < Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >

  • How to know if the client has terminated in sockets

    - by shadyabhi
    Suppose, I have a connected socket after writing this code.. if ((sd = accept(socket_d, (struct sockaddr *)&client_addr, &alen)) < 0) { perror("accept failed\n"); exit(1); } How can I know at the server side that client has exited. My whole program actually does the following.. Accepts a connection from client Starts a new thread that reads messages from that particular client and then broadcast this message to all the connected clients. If you want to see the whole code... In this whole code. I am also struggling with one more problem that whenever I kill a client with Ctrl+C, my server terminates abruptly.. It would be nice if anyone could suggest what the problem is.. #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #include <stdio.h> #include <unistd.h> #include <stdlib.h> #include <string.h> #include <signal.h> #include <errno.h> #include <pthread.h> /*CONSTANTS*/ #define DEFAULT_PORT 10000 #define LISTEN_QUEUE_LIMIT 6 #define TOTAL_CLIENTS 10 #define CHAR_BUFFER 256 /*GLOBAL VARIABLE*/ int current_client = 0; int connected_clients[TOTAL_CLIENTS]; extern int errno; void *client_handler(void * socket_d); int main(int argc, char *argv[]) { struct sockaddr_in server_addr;/* structure to hold server's address*/ int socket_d; /* listening socket descriptor */ int port; /* protocol port number */ int option_value; /* needed for setsockopt */ pthread_t tid[TOTAL_CLIENTS]; port = (argc > 1)?atoi(argv[1]):DEFAULT_PORT; /* Socket Server address structure */ memset((char *)&server_addr, 0, sizeof(server_addr)); server_addr.sin_family = AF_INET; /* set family to Internet */ server_addr.sin_addr.s_addr = INADDR_ANY; /* set the local IP address */ server_addr.sin_port = htons((u_short)port); /* Set port */ /* Create socket */ if ( (socket_d = socket(PF_INET, SOCK_STREAM, 0)) < 0) { fprintf(stderr, "socket creation failed\n"); exit(1); } /* Make listening socket's port reusable */ if (setsockopt(socket_d, SOL_SOCKET, SO_REUSEADDR, (char *)&option_value, sizeof(option_value)) < 0) { fprintf(stderr, "setsockopt failure\n"); exit(1); } /* Bind a local address to the socket */ if (bind(socket_d, (struct sockaddr *)&server_addr, sizeof(server_addr)) < 0) { fprintf(stderr, "bind failed\n"); exit(1); } /* Specify size of request queue */ if (listen(socket_d, LISTEN_QUEUE_LIMIT) < 0) { fprintf(stderr, "listen failed\n"); exit(1); } memset(connected_clients,0,sizeof(int)*TOTAL_CLIENTS); for (;;) { struct sockaddr_in client_addr; /* structure to hold client's address*/ int alen = sizeof(client_addr); /* length of address */ int sd; /* connected socket descriptor */ if ((sd = accept(socket_d, (struct sockaddr *)&client_addr, &alen)) < 0) { perror("accept failed\n"); exit(1); } else printf("\n I got a connection from (%s , %d)\n",inet_ntoa(client_addr.sin_addr),ntohs(client_addr.sin_port)); if (pthread_create(&tid[current_client],NULL,(void *)client_handler,(void *)sd) != 0) { perror("pthread_create error"); continue; } connected_clients[current_client]=sd; current_client++; /*Incrementing Client number*/ } return 0; } void *client_handler(void *connected_socket) { int sd; sd = (int)connected_socket; for ( ; ; ) { ssize_t n; char buffer[CHAR_BUFFER]; for ( ; ; ) { if (n = read(sd, buffer, sizeof(char)*CHAR_BUFFER) == -1) { perror("Error reading from client"); pthread_exit(1); } int i=0; for (i=0;i<current_client;i++) { if (write(connected_clients[i],buffer,sizeof(char)*CHAR_BUFFER) == -1) perror("Error sending messages to a client while multicasting"); } } } } My client side is this (Maye be irrelevant while answering my question) #include <stdio.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <netdb.h> #include <string.h> #include <stdlib.h> void error(char *msg) { perror(msg); exit(0); } void *listen_for_message(void * fd) { int sockfd = (int)fd; int n; char buffer[256]; bzero(buffer,256); printf("YOUR MESSAGE: "); fflush(stdout); while (1) { n = read(sockfd,buffer,256); if (n < 0) error("ERROR reading from socket"); if (n == 0) pthread_exit(1); printf("\nMESSAGE BROADCAST: %sYOUR MESSAGE: ",buffer); fflush(stdout); } } int main(int argc, char *argv[]) { int sockfd, portno, n; struct sockaddr_in serv_addr; struct hostent *server; pthread_t read_message; char buffer[256]; if (argc < 3) { fprintf(stderr,"usage %s hostname port\n", argv[0]); exit(0); } portno = atoi(argv[2]); sockfd = socket(AF_INET, SOCK_STREAM, 0); if (sockfd < 0) error("ERROR opening socket"); server = gethostbyname(argv[1]); if (server == NULL) { fprintf(stderr,"ERROR, no such host\n"); exit(0); } bzero((char *) &serv_addr, sizeof(serv_addr)); serv_addr.sin_family = AF_INET; bcopy((char *)server->h_addr, (char *)&serv_addr.sin_addr.s_addr, server->h_length); serv_addr.sin_port = htons(portno); if (connect(sockfd,&serv_addr,sizeof(serv_addr)) < 0) error("ERROR connecting"); bzero(buffer,256); if (pthread_create(&read_message,NULL,(void *)listen_for_message,(void *)sockfd) !=0 ) { perror("error creating thread"); } while (1) { fgets(buffer,255,stdin); n = write(sockfd,buffer,256); if (n < 0) error("ERROR writing to socket"); bzero(buffer,256); } return 0; }

    Read the article

  • Windows-1251 file inside UTF-8 site?

    - by Spoonk
    Hello everyone Masters Of Web Delevopment :) I have a piece of PHP script that fetches last 10 played songs from my winamp. This script is inside file (lets call it "lastplayed.php") which is included in my site with php include function inside a "div". My site is on UTF-8 encoding. The problem is that some songs titles are in Windows-1251 encoding. And in my site they displays like "??????"... Is there any known way to tell to this div with included "lastplayed.php" in it, to be with windows-1251 encoding? Or any other suggestions? P.S: The file with fetching script a.k.a. "lastplayed.php", is converted to UTF-8. But if it is ANCII it's the same result. I try to put and meta tag with windows-1251 between head tag but nothing happens again. P.P.S: Script that fetches the Winamp's data (lastplayed.php): <?php /****** * You may use and/or modify this script as long as you: * 1. Keep my name & webpage mentioned * 2. Don't use it for commercial purposes * * If you want to use this script without complying to the rules above, please contact me first at: [email protected] * * Author: Martijn Korse * Website: http://devshed.excudo.net * * Date: 08-05-2006 ***/ /** * version 2.0 */ class Radio { var $fields = array(); var $fieldsDefaults = array("Server Status", "Stream Status", "Listener Peak", "Average Listen Time", "Stream Title", "Content Type", "Stream Genre", "Stream URL", "Current Song"); var $very_first_str; var $domain, $port, $path; var $errno, $errstr; var $trackLists = array(); var $isShoutcast; var $nonShoutcastData = array( "Server Status" => "n/a", "Stream Status" => "n/a", "Listener Peak" => "n/a", "Average Listen Time" => "n/a", "Stream Title" => "n/a", "Content Type" => "n/a", "Stream Genre" => "n/a", "Stream URL" => "n/a", "Stream AIM" => "n/a", "Stream IRC" => "n/a", "Current Song" => "n/a" ); var $altServer = False; function Radio($url) { $parsed_url = parse_url($url); $this->domain = isset($parsed_url['host']) ? $parsed_url['host'] : ""; $this->port = !isset($parsed_url['port']) || empty($parsed_url['port']) ? "80" : $parsed_url['port']; $this->path = empty($parsed_url['path']) ? "/" : $parsed_url['path']; if (empty($this->domain)) { $this->domain = $this->path; $this->path = ""; } $this->setOffset("Current Stream Information"); $this->setFields(); // setting default fields $this->setTableStart("<table border=0 cellpadding=2 cellspacing=2>"); $this->setTableEnd("</table>"); } function setFields($array=False) { if (!$array) $this->fields = $this->fieldsDefaults; else $this->fields = $array; } function setOffset($string) { $this->very_first_str = $string; } function setTableStart($string) { $this->tableStart = $string; } function setTableEnd($string) { $this->tableEnd = $string; } function getHTML($page=False) { if (!$page) $page = $this->path; $contents = ""; $domain = (substr($this->domain, 0, 7) == "http://") ? substr($this->domain, 7) : $this->domain; if (@$fp = fsockopen($domain, $this->port, $this->errno, $this->errstr, 2)) { fputs($fp, "GET ".$page." HTTP/1.1\r\n". "User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows 98)\r\n". "Accept: */*\r\n". "Host: ".$domain."\r\n\r\n"); $c = 0; while (!feof($fp) && $c <= 20) { $contents .= fgets($fp, 4096); $c++; } fclose ($fp); preg_match("/(Content-Type:)(.*)/i", $contents, $matches); if (count($matches) > 0) { $contentType = trim($matches[2]); if ($contentType == "text/html") { $this->isShoutcast = True; return $contents; } else { $this->isShoutcast = False; $htmlContent = substr($contents, 0, strpos($contents, "\r\n\r\n")); $dataStr = str_replace("\r", "\n", str_replace("\r\n", "\n", $contents)); $lines = explode("\n", $dataStr); foreach ($lines AS $line) { if ($dp = strpos($line, ":")) { $key = substr($line, 0, $dp); $value = trim(substr($line, ($dp+1))); if (preg_match("/genre/i", $key)) $this->nonShoutcastData['Stream Genre'] = $value; if (preg_match("/name/i", $key)) $this->nonShoutcastData['Stream Title'] = $value; if (preg_match("/url/i", $key)) $this->nonShoutcastData['Stream URL'] = $value; if (preg_match("/content-type/i", $key)) $this->nonShoutcastData['Content Type'] = $value; if (preg_match("/icy-br/i", $key)) $this->nonShoutcastData['Stream Status'] = "Stream is up at ".$value."kbps"; if (preg_match("/icy-notice2/i", $key)) { $this->nonShoutcastData['Server Status'] = "This is <span style=\"color: red;\">not</span> a Shoutcast server!"; if (preg_match("/ultravox/i", $value)) $this->nonShoutcastData['Server Status'] .= " But an <a href=\"http://ultravox.aol.com/\" target=\"_blank\">Ultravox</a> Server"; $this->altServer = $value; } } } return nl2br($htmlContent); } } else return $contents; } else { return False; } } function getServerInfo($display_array=null, $very_first_str=null) { if (!isset($display_array)) $display_array = $this->fields; if (!isset($very_first_str)) $very_first_str = $this->very_first_str; if ($html = $this->getHTML()) { // parsing the contents $data = array(); foreach ($display_array AS $key => $item) { if ($this->isShoutcast) { $very_first_pos = stripos($html, $very_first_str); $first_pos = stripos($html, $item, $very_first_pos); $line_start = strpos($html, "<td>", $first_pos); $line_end = strpos($html, "</td>", $line_start) + 4; $difference = $line_end - $line_start; $line = substr($html, $line_start, $difference); $data[$key] = strip_tags($line); } else { $data[$key] = $this->nonShoutcastData[$item]; } } return $data; } else { return $this->errstr." (".$this->errno.")"; } } function createHistoryArray($page) { if (!in_array($page, $this->trackLists)) { $this->trackLists[] = $page; if ($html = $this->getHTML($page)) { $fromPos = stripos($html, $this->tableStart); $toPos = stripos($html, $this->tableEnd, $fromPos); $tableData = substr($html, $fromPos, ($toPos-$fromPos)); $lines = explode("</tr><tr>", $tableData); $tracks = array(); $c = 0; foreach ($lines AS $line) { $info = explode ("</td><td>", $line); $time = trim(strip_tags($info[0])); if (substr($time, 0, 9) != "Copyright" && !preg_match("/Tag Loomis, Tom Pepper and Justin Frankel/i", $info[1])) { $this->tracks[$c]['time'] = $time; $this->tracks[$c++]['track'] = trim(strip_tags($info[1])); } } if (count($this->tracks) > 0) { unset($this->tracks[0]); if (isset($this->tracks[1])) $this->tracks[1]['track'] = str_replace("Current Song", "", $this->tracks[1]['track']); } } else { $this->tracks[0] = array("time"=>$this->errno, "track"=>$this->errstr); } } } function getHistoryArray($page="/played.html") { if (!in_array($page, $this->trackLists)) $this->createHistoryArray($page); return $this->tracks; } function getHistoryTable($page="/played.html", $trackColText=False, $class=False) { $title_utf8 = mb_convert_encoding($trackArr ,"utf-8" ,"auto"); if (!in_array($page, $this->trackLists)) $this->createHistoryArray($page); if ($trackColText) $output .= " <div class='lastplayed_top'></div> <div".($class ? " class=\"".$class."\"" : "").">"; foreach ($this->tracks AS $title_utf8) $output .= "<div style='padding:2px 0;'>".$title_utf8['track']."</div>"; $output .= "</div><div class='lastplayed_bottom'></div> <div class='lastplayed_title'>".$trackColText."</div> \n"; return $output; } } // this is needed for those with a php version < 5 // the function is copied from the user comments @ php.net (http://nl3.php.net/stripos) if (!function_exists("stripos")) { function stripos($haystack, $needle, $offset=0) { return strpos(strtoupper($haystack), strtoupper($needle), $offset); } } ?> And the calling script outside the lastplayed.php: include "lastplayed.php"; $radio = new Radio($ip.":".$port); echo $radio->getHistoryTable("/played.html", "<b>Last played:</b>", "lastplayed_content");

    Read the article

  • C sockets, chat server and client, problem echoing back.

    - by wretrOvian
    Hi This is my chat server : #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/socket.h> #include <netdb.h> #include <string.h> #define LISTEN_Q 20 #define MSG_SIZE 1024 struct userlist { int sockfd; struct sockaddr addr; struct userlist *next; }; int main(int argc, char *argv[]) { // declare. int listFD, newFD, fdmax, i, j, bytesrecvd; char msg[MSG_SIZE], ipv4[INET_ADDRSTRLEN]; struct addrinfo hints, *srvrAI; struct sockaddr_storage newAddr; struct userlist *users, *uptr, *utemp; socklen_t newAddrLen; fd_set master_set, read_set; // clear sets FD_ZERO(&master_set); FD_ZERO(&read_set); // create a user list users = (struct userlist *)malloc(sizeof(struct userlist)); users->sockfd = -1; //users->addr = NULL; users->next = NULL; // clear hints memset(&hints, 0, sizeof hints); // prep hints hints.ai_family = AF_INET; hints.ai_socktype = SOCK_STREAM; hints.ai_flags = AI_PASSIVE; // get srver info if(getaddrinfo("localhost", argv[1], &hints, &srvrAI) != 0) { perror("* ERROR | getaddrinfo()\n"); exit(1); } // get a socket if((listFD = socket(srvrAI->ai_family, srvrAI->ai_socktype, srvrAI->ai_protocol)) == -1) { perror("* ERROR | socket()\n"); exit(1); } // bind socket bind(listFD, srvrAI->ai_addr, srvrAI->ai_addrlen); // listen on socket if(listen(listFD, LISTEN_Q) == -1) { perror("* ERROR | listen()\n"); exit(1); } // add listfd to master_set FD_SET(listFD, &master_set); // initialize fdmax fdmax = listFD; while(1) { // equate read_set = master_set; // run select if(select(fdmax+1, &read_set, NULL, NULL, NULL) == -1) { perror("* ERROR | select()\n"); exit(1); } // query all sockets for(i = 0; i <= fdmax; i++) { if(FD_ISSET(i, &read_set)) { // found active sockfd if(i == listFD) { // new connection // accept newAddrLen = sizeof newAddr; if((newFD = accept(listFD, (struct sockaddr *)&newAddr, &newAddrLen)) == -1) { perror("* ERROR | select()\n"); exit(1); } // resolve ip if(inet_ntop(AF_INET, &(((struct sockaddr_in *)&newAddr)->sin_addr), ipv4, INET_ADDRSTRLEN) == -1) { perror("* ERROR | inet_ntop()"); exit(1); } fprintf(stdout, "* Client Connected | %s\n", ipv4); // add to master list FD_SET(newFD, &master_set); // create new userlist component utemp = (struct userlist*)malloc(sizeof(struct userlist)); utemp->next = NULL; utemp->sockfd = newFD; utemp->addr = *((struct sockaddr *)&newAddr); // iterate to last node for(uptr = users; uptr->next != NULL; uptr = uptr->next) { } // add uptr->next = utemp; // update fdmax if(newFD > fdmax) fdmax = newFD; } else { // existing sockfd transmitting data // read if((bytesrecvd = recv(i, msg, MSG_SIZE, 0)) == -1) { perror("* ERROR | recv()\n"); exit(1); } msg[bytesrecvd] = '\0'; // find out who sent? for(uptr = users; uptr->next != NULL; uptr = uptr->next) { if(i == uptr->sockfd) break; } // resolve ip if(inet_ntop(AF_INET, &(((struct sockaddr_in *)&(uptr->addr))->sin_addr), ipv4, INET_ADDRSTRLEN) == -1) { perror("* ERROR | inet_ntop()"); exit(1); } // print fprintf(stdout, "%s\n", msg); // send to all for(j = 0; j <= fdmax; j++) { if(FD_ISSET(j, &master_set)) { if(send(j, msg, strlen(msg), 0) == -1) perror("* ERROR | send()"); } } } // handle read from client } // end select result handle } // end looping fds } // end while return 0; } This is my client: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/socket.h> #include <netdb.h> #include <string.h> #define MSG_SIZE 1024 int main(int argc, char *argv[]) { // declare. int newFD, bytesrecvd, fdmax; char msg[MSG_SIZE]; fd_set master_set, read_set; struct addrinfo hints, *srvrAI; // clear sets FD_ZERO(&master_set); FD_ZERO(&read_set); // clear hints memset(&hints, 0, sizeof hints); // prep hints hints.ai_family = AF_INET; hints.ai_socktype = SOCK_STREAM; hints.ai_flags = AI_PASSIVE; // get srver info if(getaddrinfo(argv[1], argv[2], &hints, &srvrAI) != 0) { perror("* ERROR | getaddrinfo()\n"); exit(1); } // get a socket if((newFD = socket(srvrAI->ai_family, srvrAI->ai_socktype, srvrAI->ai_protocol)) == -1) { perror("* ERROR | socket()\n"); exit(1); } // connect to server if(connect(newFD, srvrAI->ai_addr, srvrAI->ai_addrlen) == -1) { perror("* ERROR | connect()\n"); exit(1); } // add to master, and add keyboard FD_SET(newFD, &master_set); FD_SET(STDIN_FILENO, &master_set); // initialize fdmax if(newFD > STDIN_FILENO) fdmax = newFD; else fdmax = STDIN_FILENO; while(1) { // equate read_set = master_set; if(select(fdmax+1, &read_set, NULL, NULL, NULL) == -1) { perror("* ERROR | select()"); exit(1); } // check server if(FD_ISSET(newFD, &read_set)) { // read data if((bytesrecvd = recv(newFD, msg, MSG_SIZE, 0)) < 0 ) { perror("* ERROR | recv()"); exit(1); } msg[bytesrecvd] = '\0'; // print fprintf(stdout, "%s\n", msg); } // check keyboard if(FD_ISSET(STDIN_FILENO, &read_set)) { // read data from stdin if((bytesrecvd = read(STDIN_FILENO, msg, MSG_SIZE)) < 0) { perror("* ERROR | read()"); exit(1); } msg[bytesrecvd] = '\0'; // send if((send(newFD, msg, bytesrecvd, 0)) == -1) { perror("* ERROR | send()"); exit(1); } } } return 0; } The problem is with the part where the server recv()s data from an FD, then tries echoing back to all [send() ]; it just dies, w/o errors, and my client is left looping :(

    Read the article

  • how to execute two thread simultaneously in java swing?

    - by jcrshankar
    My aim is to select all the files named with MANI.txt which is present in their respective folders and then load path of the MANI.txt files different location in table. After I load the path in the table,I used to select needed path and modifiying those. To load the MANI.txt files taking more time,because it may present more than 30 times in my workspace or etc. until load the files I want to give alarm to the user with help of ProgessBar.Once the list size has been populated I need to disable ProgressBar. Could anyone please help me out on this? import java.awt.*; import javax.swing.*; import javax.swing.table.*; import java.awt.event.*; import java.io.BufferedReader; import java.io.File; import java.io.FileNotFoundException; import java.io.FileReader; import java.io.FileWriter; import java.io.IOException; import java.io.PrintWriter; public class JTableHeaderCheckBox extends JFrame implements ActionListener { Object colNames[] = {"", "Path"}; Object[][] data = {}; DefaultTableModel dtm; JTable table; JButton but; java.util.List list; public void buildGUI() { dtm = new DefaultTableModel(data,colNames); table = new JTable(dtm); table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF); int vColIndex = 0; TableColumn col = table.getColumnModel().getColumn(vColIndex); int width = 10; col.setPreferredWidth(width); int vColIndex1 = 1; TableColumn col1 = table.getColumnModel().getColumn(vColIndex1); int width1 = 500; col1.setPreferredWidth(width1); JFileChooser chooser = new JFileChooser(); //chooser.setCurrentDirectory(new java.io.File(".")); chooser.setDialogTitle("Choose workSpace Path"); chooser.setFileSelectionMode(JFileChooser.DIRECTORIES_ONLY); chooser.setAcceptAllFileFilterUsed(false); if (chooser.showOpenDialog(this) == JFileChooser.APPROVE_OPTION){ System.out.println("getCurrentDirectory(): " + chooser.getCurrentDirectory()); System.out.println("getSelectedFile() : " + chooser.getSelectedFile().getAbsolutePath()); } String path= chooser.getSelectedFile().getAbsolutePath(); File folder = new File(path); Here I need progress bar GatheringFiles ob = new GatheringFiles(); list=ob.returnlist(folder); for(int x = 0; x < list.size(); x++) { dtm.addRow(new Object[]{new Boolean(false),list.get(x).toString()}); } JPanel pan = new JPanel(); JScrollPane sp = new JScrollPane(table); TableColumn tc = table.getColumnModel().getColumn(0); tc.setCellEditor(table.getDefaultEditor(Boolean.class)); tc.setCellRenderer(table.getDefaultRenderer(Boolean.class)); tc.setHeaderRenderer(new CheckBoxHeader(new MyItemListener())); but = new JButton("REMOVE"); JFrame f = new JFrame(); pan.add(sp); but.move(650, 50); but.addActionListener(this); pan.add(but); f.add(pan); f.setSize(700, 100); f.pack(); f.setLocationRelativeTo(null); f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); f.setVisible(true); } class MyItemListener implements ItemListener { public void itemStateChanged(ItemEvent e) { Object source = e.getSource(); if (source instanceof AbstractButton == false) return; boolean checked = e.getStateChange() == ItemEvent.SELECTED; for(int x = 0, y = table.getRowCount(); x < y; x++) { table.setValueAt(new Boolean(checked),x,0); } } } public static void main (String[] args) { SwingUtilities.invokeLater(new Runnable(){ public void run(){ new JTableHeaderCheckBox().buildGUI(); } }); } public void actionPerformed(ActionEvent e) { // TODO Auto-generated method stub if(e.getSource()==but) { System.err.println("table.getRowCount()"+table.getRowCount()); for(int x = 0, y = table.getRowCount(); x < y; x++) { if("true".equals(table.getValueAt(x, 0).toString())) { System.err.println(table.getValueAt(x, 0)); System.err.println(list.get(x).toString()); delete(list.get(x).toString()); } } } } public void delete(String a) { String delete = "C:"; System.err.println(a); try { File inFile = new File(a); if (!inFile.isFile()) { System.out.println("Parameter is not an existing file"); return; } //Construct the new file that will later be renamed to the original filename. File tempFile = new File(inFile.getAbsolutePath() + ".tmp"); BufferedReader br = new BufferedReader(new FileReader(inFile)); PrintWriter pw = new PrintWriter(new FileWriter(tempFile)); String line = null; //Read from the original file and write to the new //unless content matches data to be removed. while ((line = br.readLine()) != null) { System.err.println(line); line = line.replace(delete, " "); pw.println(line); pw.flush(); } pw.close(); br.close(); //Delete the original file if (!inFile.delete()) { System.out.println("Could not delete file"); return; } //Rename the new file to the filename the original file had. if (!tempFile.renameTo(inFile)) System.out.println("Could not rename file"); } catch (FileNotFoundException ex) { ex.printStackTrace(); } catch (IOException ex) { ex.printStackTrace(); } } } class CheckBoxHeader extends JCheckBox implements TableCellRenderer, MouseListener { protected CheckBoxHeader rendererComponent; protected int column; protected boolean mousePressed = false; public CheckBoxHeader(ItemListener itemListener) { rendererComponent = this; rendererComponent.addItemListener(itemListener); } public Component getTableCellRendererComponent( JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) { if (table != null) { JTableHeader header = table.getTableHeader(); if (header != null) { rendererComponent.setForeground(header.getForeground()); rendererComponent.setBackground(header.getBackground()); rendererComponent.setFont(header.getFont()); header.addMouseListener(rendererComponent); } } setColumn(column); rendererComponent.setText("Check All"); setBorder(UIManager.getBorder("TableHeader.cellBorder")); return rendererComponent; } protected void setColumn(int column) { this.column = column; } public int getColumn() { return column; } protected void handleClickEvent(MouseEvent e) { if (mousePressed) { mousePressed=false; JTableHeader header = (JTableHeader)(e.getSource()); JTable tableView = header.getTable(); TableColumnModel columnModel = tableView.getColumnModel(); int viewColumn = columnModel.getColumnIndexAtX(e.getX()); int column = tableView.convertColumnIndexToModel(viewColumn); if (viewColumn == this.column && e.getClickCount() == 1 && column != -1) { doClick(); } } } public void mouseClicked(MouseEvent e) { handleClickEvent(e); ((JTableHeader)e.getSource()).repaint(); } public void mousePressed(MouseEvent e) { mousePressed = true; } public void mouseReleased(MouseEvent e) { } public void mouseEntered(MouseEvent e) { } public void mouseExited(MouseEvent e) { } } ****************** import java.io.File; import java.util.*; public class GatheringFiles { public static List returnlist(File folder) { List<File> list = new ArrayList<File>(); List<File> list1 = new ArrayList<File>(); getFiles(folder, list); return list; } private static void getFiles(File folder, List<File> list) { folder.setReadOnly(); File[] files = folder.listFiles(); for(int j = 0; j < files.length; j++) { if( "MANI.txt".equals(files[j].getName())) { list.add(files[j]); } if(files[j].isDirectory()) getFiles(files[j], list); } } }

    Read the article

  • Microbenchmark showing process-switching faster than thread-switching; what's wrong?

    - by Yang
    I have two simple microbenchmarks trying to measure thread- and process-switching overheads, but the process-switching overhead. The code is living here, and r1667 is pasted below: https://assorted.svn.sourceforge.net/svnroot/assorted/sandbox/trunk/src/c/process_switch_bench.c // on zs, ~2.1-2.4us/switch #include <stdlib.h> #include <fcntl.h> #include <stdint.h> #include <stdio.h> #include <semaphore.h> #include <unistd.h> #include <sys/wait.h> #include <sys/types.h> #include <sys/time.h> #include <pthread.h> uint32_t COUNTER; pthread_mutex_t LOCK; pthread_mutex_t START; sem_t *s0, *s1, *s2; void * threads ( void * unused ) { // Wait till we may fire away sem_wait(s2); for (;;) { pthread_mutex_lock(&LOCK); pthread_mutex_unlock(&LOCK); COUNTER++; sem_post(s0); sem_wait(s1); } return 0; } int64_t timeInMS () { struct timeval t; gettimeofday(&t, NULL); return ( (int64_t)t.tv_sec * 1000 + (int64_t)t.tv_usec / 1000 ); } int main ( int argc, char ** argv ) { int64_t start; pthread_t t1; pthread_mutex_init(&LOCK, NULL); COUNTER = 0; s0 = sem_open("/s0", O_CREAT, 0022, 0); if (s0 == 0) { perror("sem_open"); exit(1); } s1 = sem_open("/s1", O_CREAT, 0022, 0); if (s1 == 0) { perror("sem_open"); exit(1); } s2 = sem_open("/s2", O_CREAT, 0022, 0); if (s2 == 0) { perror("sem_open"); exit(1); } int x, y, z; sem_getvalue(s0, &x); sem_getvalue(s1, &y); sem_getvalue(s2, &z); printf("%d %d %d\n", x, y, z); pid_t pid = fork(); if (pid) { pthread_create(&t1, NULL, threads, NULL); pthread_detach(t1); // Get start time and fire away start = timeInMS(); sem_post(s2); sem_post(s2); // Wait for about a second sleep(1); // Stop thread pthread_mutex_lock(&LOCK); // Find out how much time has really passed. sleep won't guarantee me that // I sleep exactly one second, I might sleep longer since even after being // woken up, it can take some time before I gain back CPU time. Further // some more time might have passed before I obtained the lock! int64_t time = timeInMS() - start; // Correct the number of thread switches accordingly COUNTER = (uint32_t)(((uint64_t)COUNTER * 2 * 1000) / time); printf("Number of process switches in about one second was %u\n", COUNTER); printf("roughly %f microseconds per switch\n", 1000000.0 / COUNTER); // clean up kill(pid, 9); wait(0); sem_close(s0); sem_close(s1); sem_unlink("/s0"); sem_unlink("/s1"); sem_unlink("/s2"); } else { if (1) { sem_t *t = s0; s0 = s1; s1 = t; } threads(0); // never return } return 0; } https://assorted.svn.sourceforge.net/svnroot/assorted/sandbox/trunk/src/c/thread_switch_bench.c // From <http://stackoverflow.com/questions/304752/how-to-estimate-the-thread-context-switching-overhead> // on zs, ~4-5us/switch; tried making COUNTER updated only by one thread, but no difference #include <stdlib.h> #include <stdint.h> #include <stdio.h> #include <pthread.h> #include <unistd.h> #include <sys/time.h> uint32_t COUNTER; pthread_mutex_t LOCK; pthread_mutex_t START; pthread_cond_t CONDITION; void * threads ( void * unused ) { // Wait till we may fire away pthread_mutex_lock(&START); pthread_mutex_unlock(&START); int first=1; pthread_mutex_lock(&LOCK); // If I'm not the first thread, the other thread is already waiting on // the condition, thus Ihave to wake it up first, otherwise we'll deadlock if (COUNTER > 0) { pthread_cond_signal(&CONDITION); first=0; } for (;;) { if (first) COUNTER++; pthread_cond_wait(&CONDITION, &LOCK); // Always wake up the other thread before processing. The other // thread will not be able to do anything as long as I don't go // back to sleep first. pthread_cond_signal(&CONDITION); } pthread_mutex_unlock(&LOCK); return 0; } int64_t timeInMS () { struct timeval t; gettimeofday(&t, NULL); return ( (int64_t)t.tv_sec * 1000 + (int64_t)t.tv_usec / 1000 ); } int main ( int argc, char ** argv ) { int64_t start; pthread_t t1; pthread_t t2; pthread_mutex_init(&LOCK, NULL); pthread_mutex_init(&START, NULL); pthread_cond_init(&CONDITION, NULL); pthread_mutex_lock(&START); COUNTER = 0; pthread_create(&t1, NULL, threads, NULL); pthread_create(&t2, NULL, threads, NULL); pthread_detach(t1); pthread_detach(t2); // Get start time and fire away start = timeInMS(); pthread_mutex_unlock(&START); // Wait for about a second sleep(1); // Stop both threads pthread_mutex_lock(&LOCK); // Find out how much time has really passed. sleep won't guarantee me that // I sleep exactly one second, I might sleep longer since even after being // woken up, it can take some time before I gain back CPU time. Further // some more time might have passed before I obtained the lock! int64_t time = timeInMS() - start; // Correct the number of thread switches accordingly COUNTER = (uint32_t)(((uint64_t)COUNTER * 2 * 1000) / time); printf("Number of thread switches in about one second was %u\n", COUNTER); printf("roughly %f microseconds per switch\n", 1000000.0 / COUNTER); return 0; }

    Read the article

  • C socket programming: select() is returning 0 despite messages sent from server

    - by Fantastic Fourier
    Hey all, I'm using select() to recv() messages from server, using TCP/IP. When I send() messages from the server, it returns a reasonable number of bytes, saying it's sent successful. And it does get to the client successfully when I use while loop to just recv(). Everything is fine and dandy. while(1) recv() // obviously pseudocode However, when I try to use select(), select() returns 0 from timeout (which is set to 1 second) and for the life of me I cannot figure out why it doesn't see the messages sent from the server. I should also mention that when the server disconnects, select() doesn't see that either, where as if I were to use recv(), it would return 0 to indicate that the connection using the socket has been closed. Any inputs or thoughts are deeply appreciated. #include <arpa/inet.h> #include <errno.h> #include <fcntl.h> #include <netdb.h> #include <netinet/in.h> #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <strings.h> #include <sys/select.h> #include <sys/socket.h> #include <sys/time.h> #include <sys/types.h> #include <time.h> #include <unistd.h> #define SERVER_PORT 10000 #define MAX_CONNECTION 20 #define MAX_MSG 50 struct client { char c_name[MAX_MSG]; char g_name[MAX_MSG]; int csock; int host; // 0 = not host of a multicast group struct sockaddr_in client_address; struct client * next_host; struct client * next_client; }; struct fd_info { char c_name[MAX_MSG]; int socks_inuse[MAX_CONNECTION]; int sock_fd, max_fd; int exit; struct client * c_sys; struct sockaddr_in c_address[MAX_CONNECTION]; struct sockaddr_in server_address; struct sockaddr_in client_address; fd_set read_set; }; struct message { char c_name[MAX_MSG]; char g_name[MAX_MSG]; char _command[3][MAX_MSG]; char _payload[MAX_MSG]; struct sockaddr_in client_address; struct client peer; }; int main(int argc, char * argv[]) { char * host; char * temp; int i, sockfd; int msg_len, rv, ready; int connection, management, socketread; int sockfds[MAX_CONNECTION]; // for three threads that handle new connections, user inputs and select() for sockets pthread_t connection_handler, manager, socket_reader; struct sockaddr_in server_address, client_address; struct hostent * hserver, cserver; struct timeval timeout; struct message msg; struct fd_info info; info.exit = 0; // exit information: if exit = 1, threads quit info.c_sys = NULL; // looking up from the host database if (argc == 3) { host = argv[1]; // server address strncpy(info.c_name, argv[2], strlen(argv[2])); // client name } else { printf("plz read the manual, kthxbai\n"); exit(1); } printf("host is %s and hp is %p\n", host, hserver); hserver = gethostbyname(host); if (hserver) { printf("host found: %s\n", hserver->h_name ); } else { printf("host not found\n"); exit(1); } // setting up address and port structure information on serverside bzero((char * ) &server_address, sizeof(server_address)); // copy zeroes into string server_address.sin_family = AF_INET; memcpy(&server_address.sin_addr, hserver->h_addr, hserver->h_length); server_address.sin_port = htons(SERVER_PORT); bzero((char * ) &client_address, sizeof(client_address)); // copy zeroes into string client_address.sin_family = AF_INET; client_address.sin_addr.s_addr = htonl(INADDR_ANY); client_address.sin_port = htons(SERVER_PORT); // opening up socket sockfd = socket(AF_INET, SOCK_STREAM, 0); if (sockfd < 0) exit(1); else { printf("socket is opened: %i \n", sockfd); info.sock_fd = sockfd; } // sets up time out option for the bound socket timeout.tv_sec = 1; // seconds timeout.tv_usec = 0; // micro seconds ( 0.5 seconds) setsockopt(sockfd, SOL_SOCKET, SO_RCVTIMEO, &timeout, sizeof(struct timeval)); // binding socket to a port rv = bind(sockfd, (struct sockaddr *) &client_address, sizeof(client_address)); if (rv < 0) { printf("MAIN: ERROR bind() %i: %s\n", errno, strerror(errno)); exit(1); } else printf("socket is bound\n"); printf("MAIN: %li \n", client_address.sin_addr.s_addr); // connecting rv = connect(sockfd, (struct sockaddr *) &server_address, sizeof(server_address)); info.server_address = server_address; info.client_address = client_address; info.sock_fd = sockfd; info.max_fd = sockfd; printf("rv = %i\n", rv); if (rv < 0) { printf("MAIN: ERROR connect() %i: %s\n", errno, strerror(errno)); exit(1); } else printf("connected\n"); fd_set readset; FD_ZERO(&readset); FD_ZERO(&info.read_set); FD_SET(info.sock_fd, &info.read_set); while(1) { readset = info.read_set; printf("MAIN: %i \n", readset); ready = select((info.max_fd)+1, &readset, NULL, NULL, &timeout); if(ready == -1) { sleep(2); printf("TEST: MAIN: ready = -1. %s \n", strerror(errno)); } else if (ready == 0) { sleep(2); printf("TEST: MAIN: ready = 0. %s \n", strerror(errno)); } else if (ready > 0) { printf("TEST: MAIN: ready = %i. %s at socket %i \n", ready, strerror(errno), i); for(i = 0; i < ((info.max_fd)+1); i++) { if(FD_ISSET(i, &readset)) { rv = recv(sockfd, &msg, 500, 0); if(rv < 0) continue; else if(rv > 0) printf("MAIN: TEST: %s %s \n", msg._command[0], msg._payload); else if (rv == 0) { sleep(3); printf("MAIN: TEST: SOCKET CLOSEDDDDDD \n"); } FD_CLR(i, &readset); } } } info.read_set = readset; } // close connection close(sockfd); printf("socket closed. BYE! \n"); return(0); }

    Read the article

  • RHEL - blocked FC remote port time out: saving binding

    - by Dev G
    My Server went into a faulty state since the database could not write on the partition. I found out that the partition went into Read Only mode. Finally to fix it, I had to do a hard reboot. Linux 2.6.18-164.el5PAE #1 SMP Tue Aug 18 15:59:11 EDT 2009 i686 i686 i386 GNU/Linux /var/log/messages Oct 31 00:56:45 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 00:57:05 ota3g1 Had[17275]: VCS CRITICAL V-16-1-50086 CPU usage on ota3g1.mtsallstream.com is 100% Oct 31 01:01:47 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:06:50 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:11:52 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:12:10 ota3g1 kernel: lpfc 0000:29:00.1: 1:1305 Link Down Event x2 received Data: x2 x20 x80000 x0 x0 Oct 31 01:12:10 ota3g1 kernel: lpfc 0000:29:00.1: 1:1303 Link Up Event x3 received Data: x3 x1 x10 x1 x0 x0 0 Oct 31 01:12:12 ota3g1 kernel: lpfc 0000:29:00.1: 1:1305 Link Down Event x4 received Data: x4 x20 x80000 x0 x0 Oct 31 01:12:40 ota3g1 kernel: rport-8:0-0: blocked FC remote port time out: saving binding Oct 31 01:12:40 ota3g1 kernel: lpfc 0000:29:00.1: 1:(0):0203 Devloss timeout on WWPN 20:25:00:a0:b8:74:f5:65 NPort x0000e4 Data: x0 x7 x0 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 38617577 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283532153 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 90825 Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-16. Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 868841 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-10. Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37759889 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283349449 Oct 31 01:12:40 ota3g1 kernel: printk: 6 messages suppressed. Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-12. Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-12) in ext3_reserve_inode_write: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 1545 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 12745 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-10, logical block 1545 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-16) in ext3_reserve_inode_write: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-10 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37749121 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 0 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-12) in ext3_dirty_inode: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37757897 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 1097 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283337089 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 0 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-16) in ext3_dirty_inode: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37749121 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 0 Oct 31 01:12:41 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:41 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:41 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283337089 Oct 31 01:12:41 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 0 Oct 31 01:12:41 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:41 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/cciss-root 4.9G 730M 3.9G 16% / /dev/mapper/cciss-home 9.7G 1.2G 8.1G 13% /home /dev/mapper/cciss-var 9.7G 494M 8.8G 6% /var /dev/mapper/cciss-usr 15G 2.6G 12G 19% /usr /dev/mapper/cciss-tmp 3.9G 153M 3.6G 5% /tmp /dev/sda1 996M 43M 902M 5% /boot tmpfs 5.9G 0 5.9G 0% /dev/shm /dev/mapper/cciss-product 25G 16G 7.4G 68% /product /dev/mapper/cciss-opt 20G 4.5G 14G 25% /opt /dev/mapper/dg_db1-vol_db1_system 18G 2.2G 15G 14% /database/OTADB/sys /dev/mapper/dg_db1-vol_db1_undo 18G 5.8G 12G 35% /database/OTADB/undo /dev/mapper/dg_db1-vol_db1_redo 8.9G 4.3G 4.2G 51% /database/OTADB/redo /dev/mapper/dg_db1-vol_db1_sgbd 8.9G 654M 7.8G 8% /database/OTADB/admin /dev/mapper/dg_db1-vol_db1_arch 98G 24G 69G 26% /database/OTADB/arch /dev/mapper/dg_db1-vol_db1_indexes 240G 14G 214G 6% /database/OTADB/index /dev/mapper/dg_db1-vol_db1_data 275G 47G 215G 18% /database/OTADB/data /dev/mapper/dg_dbrman-vol_db_rman 8.9G 351M 8.1G 5% /database/RMAN /dev/mapper/dg_app1-vol_app1 151G 113G 31G 79% /files/ota /etc/fstab /dev/cciss/root / ext3 defaults 1 1 /dev/cciss/home /home ext3 defaults 1 2 /dev/cciss/var /var ext3 defaults 1 2 /dev/cciss/usr /usr ext3 defaults 1 2 /dev/cciss/tmp /tmp ext3 defaults 1 2 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/cciss/swap swap swap defaults 0 0 /dev/cciss/product /product ext3 defaults 1 2 /dev/cciss/opt /opt ext3 defaults 1 2 /dev/dg_db1/vol_db1_system /database/OTADB/sys ext3 defaults 1 2 /dev/dg_db1/vol_db1_undo /database/OTADB/undo ext3 defaults 1 2 /dev/dg_db1/vol_db1_redo /database/OTADB/redo ext3 defaults 1 2 /dev/dg_db1/vol_db1_sgbd /database/OTADB/admin ext3 defaults 1 2 /dev/dg_db1/vol_db1_arch /database/OTADB/arch ext3 defaults 1 2 /dev/dg_db1/vol_db1_indexes /database/OTADB/index ext3 defaults 1 2 /dev/dg_db1/vol_db1_data /database/OTADB/data ext3 defaults 1 2 /dev/dg_dbrman/vol_db_rman /database/RMAN ext3 defaults 1 2 /dev/dg_app1/vol_app1 /files/ota ext3 defaults 1 2 Thanks for all the help.

    Read the article

  • Unable to set password in IIS 8 for Domain User as ApplicationPool Identity

    - by Niels R.
    I'm trying to set a Domain User account as ApplicationPool Identity in IIS 8 (Windows 2012). When trying this using the IIS Management Console I always get an error: Value does not fall within the expected range. When trying to set the identity using appcmd.exe it fails on both the command setting the username and password or the command only setting the password. Setting the username is no problem. Trying to set both the username and password [FAIL]: >appcmd set config /section:applicationPools /[name='AppPoolName'].processModel.identityType:SpecificUser /[name='AppPoolName'].processModel.userName:DOMAIN\Username /[name='AppPoolName'].processModel.password:P4ssW0rd Applied configuration changes to section "system.applicationHost/applicationPools" for "MACHINE/WEBROOT/APPHOST" at configuration commit path "MACHINE/WEBROOT/APPHOST" ERROR ( hresult:80070057, message:Failed to commit configuration changes. The parameter is incorrect. ) Trying to set only the username [SUCCESS]: >appcmd set config /section:applicationPools /[name='AppPoolName'].processModel.identityType:SpecificUser /[name='AppPoolName'].processModel.userName:DOMAIN\Username Applied configuration changes to section "system.applicationHost/applicationPools" for "MACHINE/WEBROOT/APPHOST" at configuration commit path "MACHINE/WEBROOT/APPHOST" Trying to set the password after successfully setting the username [FAIL]: >appcmd set config /section:applicationPools /[name='AppPoolName'].processModel.identityType:SpecificUser /[name='AppPoolName'].processModel.password:P4ssW0rd Applied configuration changes to section "system.applicationHost/applicationPools" for "MACHINE/WEBROOT/APPHOST" at configuration commit path "MACHINE/WEBROOT/APPHOST" ERROR ( hresult:80070057, message:Failed to commit configuration changes. The parameter is incorrect. ) I added the Domain User to the IIS_IUSRS group and allowed it to "Log on as a service". Any suggestions what I might be doing wrong?

    Read the article

  • Error when trying to start Apache after installing SSL cert

    - by chris
    I am trying to install an SSL certificate, and I get the following errors: AH02241: Init: Unable to read server certificate from file /path/my.crt SSL Library Error: error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag SSL Library Error: error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error (Type=X509) AH02312: Fatal error initialising mod_ssl, exiting. Here's the process I followed: I generated my private key with: openssl genrsa -out my.key 2048 I created the CSR with: openssl req -new -key my.key -out my.csr I provided the CSR to our IT department, and they returned a crt - it starts with -----BEGIN CERTIFICATE----- My ssl.conf has (my.example.com matches the Common name used during the generation of the CSR): <VirtualHost my.example.com:443> SSLEngine On ServerName my.example.com SSLCertificateFile /path/my.crt SSLCertificateKeyFile /path/my.key </VirtualHost> I do not have SSLCertificateChainFile or SSLCACertificate file set. The private key starts with ----BEGIN RSA PRIVATE KEY----- The csr starts with -----BEGIN CERTIFICATE REQUEST----- I have verified that both: openssl rsa -noout -modulus -in my.key openssl req -noout -modulus -in my.csr produce the same output. I cannot figure out how to verify the crt - trying both x509 and rsa produce an error. Should this process have worked? Can I verify that my.crt matches the key somehow?

    Read the article

  • Query specific logs from event log using nxlog

    - by user170899
    Below is my nxlog configuration define ROOT C:\Program Files (x86)\nxlog Moduledir %ROOT%\modules CacheDir %ROOT%\data Pidfile %ROOT%\data\nxlog.pid SpoolDir %ROOT%\data LogFile %ROOT%\data\nxlog.log <Extension json> Module xm_json </Extension> <Input internal> Module im_internal </Input> <Input eventlog> Module im_msvistalog Query <QueryList>\ <Query Id="0">\ <Select Path="Security">*</Select>\ </Query>\ </QueryList> </Input> <Output out> Module om_tcp Host localhost Port 3515 Exec $EventReceivedTime = integer($EventReceivedTime) / 1000000; \ to_json(); </Output> <Route 1> Path eventlog, internal => out </Route> <Select Path="Security">*</Select>\ - * gets everything from the Security log, but my requirement is to get specific logs starting with EventId - 4663. How do i do this? Please help. Thanks.

    Read the article

  • Windows Server Backup fails to backup Hyper-V VM with "Access is denied"

    - by Sebastian Krysmanski
    I'm trying to use Windows Server Backup on my Windows Server 2012 box to backup my Hyper-V VMs. I created a backup job but each job ends with some "Access is denied" errors. One of my VMs (Linux Server) is backed up properly. All others (one Windows 8, one Linux) are not (or at least it seems that way from the looks of the log file below). How can I solve this problem? Here's the log I'm getting: Error in backup of D:\ during read: Error [0x80070005] Access is denied. Application backup Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE} Component: C435964E-C07A-4958-BA73-A04C6583280F Caption : Backup Using Saved State\Alter Server Logical Path: Error : 8078010E Error Message : Copy of the files failed. Detailed Error : 80070005 Detailed Error Message : (null) Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE} Component: E780F138-9676-42FB-821C-4561B9B263DC Caption : Backup Using Child Partition Snapshot\Windows 8 Logical Path: Error : 8078010E Error Message : Copy of the files failed. Detailed Error : 80070005 Detailed Error Message : (null) Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE} Component: Host Component Caption : Host Component Logical Path: Error : 8078010E Error Message : Copy of the files failed. Detailed Error : 80070005 Detailed Error Message : (null)

    Read the article

  • Executing Oracle SQLPlus in a Powershell Invoke-Command statement against a remote machine

    - by Scott Muc
    We have a basic powershell script that attempts to execute SQLPlus.exe on a remote machine. The remote does not have Oracle Instant client installed, but we have bundled all the necesary dlls in a remote folder. For example we have sqlplus.exe and dependencies in the directory C:\temp\oracle. If I navigate to that path on the remote server and execute sqlplus.exe it runs just fine. I get the prompt for username. If I go: Invoke-Command -comp remote.machine.host -ScriptBlock { C:\temp\oracle\sqplus.exe } I get the following: Error 57 initializing SQL*Plus + CategoryInfo : NotSpecified: (Error 57 initializing SQL*Plus:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Error loading message shared library Thinking that it's potentially a PATH issue I tried the following: Invoke-Command -comp remote.machine.host -ScriptBlock { $env:ORACLE_HOME= "C:\temp\oracle"; $env:PATH = "$env:ORACLE_HOME; C:\temp\oracle\sqlplus.exe } This had the same result. The error code is not very helpful and is extremely frustrating since it does work when I log on to the machine. What is powershell remoting doing that's making this not work?

    Read the article

  • Appcrash and possible malware

    - by Chris Lively
    First off, I'm running MS Intune Endpoint Protection. It is completely up to date. On 10/25 @ 11:53PM I came across a site that caused Intune to freak out: Microsoft Antimalware has detected malware or other potentially unwanted software. For more information please see the following: http://go.microsoft.com/fwlink/?linkid=37020&name=Trojan:Win64/Sirefef.B&threatid=2147646729 Name: Trojan:Win64/Sirefef.B ID: 2147646729 Severity: Severe Category: Trojan Path: file:_C:\Windows\System32\consrv.dll Detection Origin: Local machine Detection Type: Concrete Detection Source: Real-Time Protection User: NT AUTHORITY\SYSTEM Process Name: C:\Windows\explorer.exe Signature Version: AV: 1.115.526.0, AS: 1.115.526.0, NIS: 10.7.0.0 Engine Version: AM: 1.1.7801.0, NIS: 2.0.7707.0 I, of course, elected to simply delete the file. Since then my machine has been randomly giving an error about "Host Process for Windows Services" stopped working. There are generally two different pieces of info: Description Faulting Application Path: C:\Windows\System32\svchost.exe Problem signature Problem Event Name: BEX64 Application Name: svchost.exe Application Version: 6.1.7600.16385 Application Timestamp: 4a5bc3c1 Fault Module Name: StackHash_52d4 Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Offset: 000062bdabe00000 Exception Code: c0000005 Exception Data: 0000000000000008 OS Version: 6.1.7601.2.1.0.256.27 Locale ID: 1033 Additional Information 1: 52d4 Additional Information 2: 52d47b8b925663f9d6437d7892cdf21b Additional Information 3: ed24 Additional Information 4: ed24528f3b69e8539b5c5c2158896d3e and Description Faulting Application Path: C:\Windows\System32\svchost.exe Problem signature Problem Event Name: APPCRASH Application Name: svchost.exe Application Version: 6.1.7600.16385 Application Timestamp: 4a5bc3c1 Fault Module Name: mshtml.dll Fault Module Version: 9.0.8112.16437 Fault Module Timestamp: 4e5f1784 Exception Code: c0000005 Exception Offset: 00000000002ed3c2 OS Version: 6.1.7601.2.1.0.256.27 Locale ID: 1033 Additional Information 1: 3e9e Additional Information 2: 3e9e8b83f6a5f2a25451516023078a83 Additional Information 3: 432a Additional Information 4: 432a0284c502cce3bbb92a3bd555fe65 Intune claims the machine is clean. I've also tried some of the online scanners like trendmicro, all of which claimed the system is clean. Finally, I tried the "sfc /scannow" and it said all was good. I left my machine on after I left last night and there were about 50 of those messages. Ideas on how to proceed?

    Read the article

  • Booting the server redis no errors

    - by Tylër
    The redis but usually begins with the following errors: tyler @ tyler-vortex: ~ / pens $. / src / redis-server [3690] Dec 01 10:56:05 # Warning: the specified config file, using the default config. In order to Specify a config file use 'redis-server / path / to / redis.conf' [3690] Dec 01 10:56:05 # Unable to set the max number of files limit to 10032 (Operation not permitted), setting the max configuration to 992 clients. Others errors founds: tyler@tyler-vortex:~/redis$ sudo ./utils/install_server.sh Welcome to the redis service installer This script will help you easily set up a running redis server Please select the redis port for this instance: [6379] Selecting default: 6379 Please select the redis config file name [/etc/redis/6379.conf] Selected default - /etc/redis/6379.conf Please select the redis log file name [/var/log/redis_6379.log] Selected default - /var/log/redis_6379.log Please select the data directory for this instance [/var/lib/redis/6379] Selected default - /var/lib/redis/6379 Please select the redis executable path [/usr/local/bin/redis-server] cat: ./redis.conf.tpl: Arquivo ou diretório não encontrado cat: ./redis_init_script.tpl: Arquivo ou diretório não encontrado ERROR: Could not write init script to /tmp/6379.conf. Aborting! Furthermore, I would like to know how to configure it not to consume so much RAM. Follow the memory configuration of our website, but the settings of "vm-*" does not exist in the file redis.conf. http://redis.io/topics/virtual-memory You have to create them? * Edit: I installed. After that, I believe that I no longer have access via. / Src / redis-server, because it happens: tyler@tyler-vortex:~$ cd redis/ tyler@tyler-vortex:~/redis$ ./src/redis-server [2616] 01 Dec 22:29:30 # Warning: no config file specified, using the default config. In order to specify a config file use 'redis-server /path/to/redis.conf' [2616] 01 Dec 22:29:30 # Opening port 6379: bind: Address already in use tyler@tyler-vortex:~/redis$ But there's another detail, the redistribution starts with the system .. redis 127.0.0.1:6379> exit tyler@tyler-vortex:~/redis$ ./src/redis-cli redis 127.0.0.1:6379> exit ... but how can I now see that the communication had before you installed from. sh?

    Read the article

  • Troubleshooting transient Windows I/O "The parameter is incorrect." errors

    - by Kevin
    We have a set of .Net 2.0 applications running on Windows 2003 servers which have started experiencing transient "The parameter is incorrect." Windows I/O errors. These errors always happen accessing a file share on a SAN. The fact that this error has happened with multiple applications and multiple servers leads me to believe that this is an infrastructure issue of some sort. The applications all run under the same domain account. When the errors occur they generally will resolve themselves within a few minutes. I can log in to the application server once the error starts occurring and access the file share myself with no problems. I have looked at the Windows event logs and haven't found anything useful. Due to the generic nature of "The parameter is incorrect.", I am looking for additional troubleshooting suggestions for this error. A sample stack trace is below. Note that while this example was during a directory creation operation, when the problem is occurring, this exception is thrown for any file system operations on the share. Exception 1: System.IO.IOException Message: The parameter is incorrect. Method: Void WinIOError(Int32, System.String) Source: mscorlib Stack Trace: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.Directory.InternalCreateDirectory(String fullPath, String path, DirectorySecurity dirSecurity) at System.IO.Directory.CreateDirectory(String path, DirectorySecurity directorySecurity) at System.IO.Directory.CreateDirectory(String path)

    Read the article

  • Why can't “knife data bag from file” find existing json file on chef server?

    - by ellisera
    Summary: I'm running into a problem with "knife data bag from file", where knife doesn't recognize the .json data bag file pulled down from a remote git repo. Background: I'm currently trying to transition from chef-solo use to chef server while using the cookbooks, data bags and other chef info from our remote git repo. I've currently pulled down a copy of our git repo and set the cookbook path and data bag path in knife.rb. I also loaded the cookbooks, made adjustments, etc. Details: When trying to load our .json data bags by doing "knife data bag add from file FOLDER FILE" it looks like it worked until I do "knife data bag list" and it comes up blank. So I decided to try adding the edit option at the end to see what's being loaded, if it is. This is the error I get: knife data bag from file local_settings test.json -e nano ERROR: Could not find or open file 'test.json' in current directory or in 'data_bags/local_settings/test.json' The data bag file does exist, in the proper location, in a tested, working json file. I've also sometimes gotten an error saying "could not open data bag "local_settings". I would obviously like to keep the data bag path within the appropriate git repo folder to be able to keep track of changes in a more centralized location (our git repo, as opposed to the chef server). Any solutions, advice or pointers in the right direction are appreciated.

    Read the article

  • Troubleshooting transient Windows I/O "The parameter is incorrect." errors

    - by Kevin
    We have a set of .Net 2.0 applications running on Windows 2003 servers which have started experiencing transient "The parameter is incorrect." Windows I/O errors. These errors always happen accessing a file share on a SAN. The fact that this error has happened with multiple applications and multiple servers leads me to believe that this is an infrastructure issue of some sort. The applications all run under the same domain account. When the errors occur they generally will resolve themselves within a few minutes. I can log in to the application server once the error starts occurring and access the file share myself with no problems. I have looked at the Windows event logs and haven't found anything useful. Due to the generic nature of "The parameter is incorrect.", I am looking for additional troubleshooting suggestions for this error. A sample stack trace is below. Note that while this example was during a directory creation operation, when the problem is occurring, this exception is thrown for any file system operations on the share. Exception 1: System.IO.IOException Message: The parameter is incorrect. Method: Void WinIOError(Int32, System.String) Source: mscorlib Stack Trace: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.Directory.InternalCreateDirectory(String fullPath, String path, DirectorySecurity dirSecurity) at System.IO.Directory.CreateDirectory(String path, DirectorySecurity directorySecurity) at System.IO.Directory.CreateDirectory(String path)

    Read the article

  • Windows 2008 Server cannot access any network share

    - by Ramesh
    Hello friends I run a Windows 2008 server with SP2. This server acts as a desktop alone. Recently, I switched between two networks (corporate and other) using this system. Ever since, I am unable to access any network share on the original network from where I installed and configured the desktop. The message I get is "Network path was not found". Note that I am able to access the internet and my corporate mail server. I am told this is a Vista and Windows 2008 specific problem and I have done everything I could think of: a) Deleted the second network settings from the desktop b) Installed a patch from MS that supposed took care of this problem (with MS clearly saying they had not tested this enough) c) The SP2 install was after the problem occurred and I went ahead with it in the hope that SP2 may have something that would fix this Some additional details: a) A system admin can log into this system from a remote terminal b) I cannot get into my own system using the hidden share C$ - for instance \mymachine\C$ gives me the same message as above - Network path not found c) I can log into my system remotely using mstsc d) I cannot create shares on this system - as an extension network printers are not detected I have an update for you: The error message is as follows - **Network Error** Windows cannot access \\network_share Check the spelling of the name. Otherwise there might a problem with your network. To try to identify and resolve network problems, click Diagnose. Clicking Diagnose gives Error Code: 0x80070035 The network path was not found. Any help will be appreciated Thanks

    Read the article

  • How to register an agent with launchd

    - by Konrad Rudolph
    I’m unable to schedule a periodic launch with launchctl/launchd on OS X (Leopard). Basically, I’m unable to find a step-by-step list of instructions on the web and the intuitive approach doesn’t work. The sync.plist file: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>net.madrat.utils.sync</string> <key>Program</key> <string>rsync</string> <key>ProgramArguments</key> <array> <string>-ar</string> <string>/path/to/folder/</string> <string>/path/to/backup/</string> </array> <key>StartInterval</key> <integer>7200</integer> </dict> </plist> I’ve put this script inside the path ~/Library/LaunchAgents. Next, I’ve registered the script using launchctl load ~/Library/LaunchAgents/sync.plist Finally, to test that it works, I started the job: launchctl start net.madrat.utils.sync – Nothing happened. Manually executing the rsync command in the terminal yields the expected result. I’m fairly sure that the job was registered correctly because if I try to start a non-existing job, I get an error message (which I didn’t get in the above command). What did I do wrong?

    Read the article

  • Commandline program to extract archives with automatic subdirectry detection

    - by ??????
    The title already says it. What I'm looking for is essentially the pure commandline counterpart to ark -ba <path> (on KDE), or file-roller -h <path> (on GNOME/Unity). Unfortunately, both ark and file-roller require X to be running. I'm aware that it is relatively simple to write a tool that detects archives based on their file extension, and then runs the appropiate program: #!/bin/bash if [[ -f "$1" ]] ; then case $1 in *.tar.bz2) tar xjvf $1 ;; *.tar.gz) tar xzvf $1 ;; *.bz2) bunzip2 $1 ;; *.rar) rar x $1 ;; *.gz) gunzip $1 ;; *.tar) tar xf $1 ;; *.tbz2) tar xjvf $1 ;; *.tgz) tar xzvf $1 ;; *.zip) unzip $1 ;; *.Z) uncompress $1 ;; *.7z) 7z x $1 ;; *) echo "'$1' cannot be extracted with this utility" ;; esac else echo "path '$1' does not exist or is not a file" fi However, that doesn't take care of subdirectory detection (and in fact, many extraction programs do not even supply such an option). So might there be a program that does exactly that? I wasn't sure whether or not to ask on askubuntu.com, because this question isn't really about Ubuntu, but rather about any Linux operating system. My apologies if this question does not fit in here.

    Read the article

  • Starfield Wildcard SSL Certificate Not Trusted in All Browsers

    - by Austen Cameron
    I am at a loss as to what else I might try in order to debug this issue with a Starfield Wildcard SSL Certificate. The problem is that in certain browsers (Safari or the most-updated chrome you can get for OS X 10.5.8 for example) the certificate comes up as untrusted, even on the root domain. My server setup / background info: General LAMP setup - CentOS 6.3 - on a Godaddy VPS Starfield Technologies Wildcard SSL certificate Installed using the instructions from godaddy's support pages ssl.conf lines are basically as follows: SSLCertificateFile /path/to/cert/mysite.com.cert SSLCertificateKeyFile /path/to/cert/mysite.key SSLCertificateChainFile /path/to/cert/sf_bundle.crt Everything seemingly worked fine until the other night when I noticed the problem in OS X, I assume it's more browser version related, but have only been able to replicate it on that particular machine. What I have tried: Updating sf_bundle.crt from godaddy's cert repository and Starfield's repository versions Following This ServerFault answer from Jim Phares - changing the ChainFile line to sf_intermediate.crt from Starfield's repository Using http://www.sslshopper.com/ssl-checker.html on my url It says the domain is correctly listed on the certificate but comes up with an error that reads The certificate is not trusted in all web browsers. You may need to install an Intermediate/chain certificate to link it to a trusted root certificate. What might I try next to remedy the untrusted certificate issue? Let me know if there is any other information needed that might help debugging this issue. Thanks in advance!

    Read the article

  • Executing Oracle SQLPlus in a Powershell Invoke-Command statement against a remote machine

    - by Scott Muc
    We have a basic powershell script that attempts to execute SQLPlus.exe on a remote machine. The remote does not have Oracle Instant client installed, but we have bundled all the necesary dlls in a remote folder. For example we have sqlplus.exe and dependencies in the directory C:\temp\oracle. If I navigate to that path on the remote server and execute sqlplus.exe it runs just fine. I get the prompt for username. If I go: Invoke-Command -comp remote.machine.host -ScriptBlock { C:\temp\oracle\sqplus.exe } I get the following: Error 57 initializing SQL*Plus + CategoryInfo : NotSpecified: (Error 57 initializing SQL*Plus:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Error loading message shared library Thinking that it's potentially a PATH issue I tried the following: Invoke-Command -comp remote.machine.host -ScriptBlock { $env:ORACLE_HOME= "C:\temp\oracle"; $env:PATH = "$env:ORACLE_HOME; C:\temp\oracle\sqlplus.exe } This had the same result. The error code is not very helpful and is extremely frustrating since it does work when I log on to the machine. What is powershell remoting doing that's making this not work?

    Read the article

  • Cannot run logwatch due to Date::Manip issue

    - by Quintin Par
    I tried to run logwatch at follows [root@machine cron.daily]# ./0logwatch ERROR: Date::Manip unable to determine TimeZone. Execute the following command in a shell prompt: perldoc Date::Manip The section titled TIMEZONES describes valid TimeZones and where they can be defined. My date is as follows root@machine cron.daily]# date Thu Aug 23 06:25:21 GMT 2012 Now based on details in various forums I tried to fix this by setting /etc/timezone to “+0800” but it didn’t work My /etc/localtime points to /usr/share/zoneinfo/GMT and is managed by puppet How do I go about fixing this? I still want all my machines to be in GMT timezone. EDIT: Sadly, Both the changes are not working: [root@machine cron.daily]# cat /etc/TIMEZONE UTC Quanta’s [root@machine cron.daily]# cat ~/.bash_profile # .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export TZ=GMT export PATH [root@machine cron.daily]# source ~/.bash_profile [root@machine cron.daily]# ./0logwatch ERROR: Date::Manip unable to determine TimeZone. Execute the following command in a shell prompt: perldoc Date::Manip The section titled TIMEZONES describes valid TimeZones and where they can be defined.

    Read the article

  • Setting Up VirtualHosts for a local RubyOnRails Application

    - by chris Frisina
    I want to set up a VirtualHost so that when I type the project name in the address bar, it goes to the home page of the project. httpd-vhosts.conf files in both XAMPP configuration and apache configuration: <VirtualHost project> ServerAdmin [email protected] ServerName project DocumentRoot /Users/path/to/project/public <Directory "/Users/path/to/project/public"> Options Includes FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> RewriteEngine On RewriteOptions inherit </VirtualHost> I have also tried with the path directly to the project folder, and not the public folder of the project. the httpd.conf of XAMPP and apache : # Virtual hosts Include /Applications/XAMPP/etc/extra/httpd-vhosts.conf the /etc/hosts file: 127.0.0.1 other1 127.0.0.1 other2 127.0.0.1 project I have tried : 127.0.0.1 project 127.0.0.1:3000 project 127.0.0.1 project:3000 I have also restarted the rails server and the XAMPP server many times after changes. I have it working so that the project:3000/ works, but how do I get it so that I dont have to specify the port number? Notes: All other VHosts are working well. Rails 3.2.8 (willing to change) Ruby 1.9.3 WEBrick server

    Read the article

  • Samba between Ubuntu server 10.10 and Windows Vista, Windows 7

    - by chepukha
    Hi all, I have a linux box running Linux server ubuntu 10.10. I have installed Samba on this linux box and want to share files with my laptops which run Windows Vista home and Windows 7 home. I have been struggling with the setup for almost a month but couldn't get it right. If I try to access share folder from Windows Vista, I get message "Windows cannot access \\server_ip_address". Error code: 0x80070035. The network path was not found. If I access from Windows 7, then after entering password to login I can see the list of share folders on Linux box. But if I click on a share folder, I get the same error message as above. Tail /var/log/samba/log.windows7-pc I got the following message: [2011/03/16 00:17:41.427238, 0] smbd/service.c:988(make_connection_snum) canonicalize_connect_path failed for service sharemedia, path /root/sharemedia Here is my setting in smb.conf [global] share modes = yes netbios name = Samba workgroup = WORKGROUP wins support = yes encrypt passwords = true [sharemedia] comment = Tesing sharing using Samba path=/root/sharemedia/ public = yes valid users = samba_usr_name ; make sure all files are sensible permissions create mask = 0660 force create mask = 0660 directory mask = 2770 force directory mask = 2770 directory security mask = 0000 ; Normal share parameters read only = no browseable = yes writable = yes guest ok = no

    Read the article

< Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >