Search Results

Search found 7435 results on 298 pages for 'hardware'.

Page 190/298 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

• Will disabling NAT on my wireless router cause a performance hit on my DSL router?

  - by user117313

  I have a Thomson TG508v2 router/modem and a brand new AirPort Extreme connected to it. At first, I set the AirPort Extreme to "share a public IP", which enables DHCP/NAT. Everything works great but I was having the Double NAT error. So I set the AirPort Extreme as bridge mode, which disables DHCP/NAT and let my crappy modem handle my internal network IPs. Will this cause any performance hit in my network? I'm worried because I'll outsource this job from AirPort Extreme (premium hardware) to the crappy modem. Before you suggest, I tried setting my modem as a bridge and configuring PPPoE on the AirPort Extreme, however it wouldn't connect to the internet, so I just dismissed leaving the modem as bridge.

  Read the article

• Which Power supply I should buy

  - by arayman

  I am going to buy a new PSU of CORSAIR for my IBM thinkcentre desktop. My previous original PSU was of 230 watts. I have not added any hardware in the CPU. It's in same condition as it was when I bought. On that basis, please suggest which power supply of Corsair and of how many watts will be suitable for me to buy, after referring to the under given weblink. http://www.corsair.com/en/power-supply-units.html Thanks.

  Read the article

• Ubuntu 9.10 Karmic, nVidea Quadro NVS 280 PCi, Eizo S1921 Dual Screen (Twin View) Slow Window Draws

  - by Spasm

  I have been following this Tutorial to get dual monitors working on my box http://www.dwasifar.com/?p=862&cpage=1#comment-5727 It works! However, when ever I move a window, the redraw of that window takes 3-8 seconds. Even moving the window takes the same amount of time Is this being done in software rather than the nVidea hardware? The windows themselves do not respond. I have seen a few old threads but no relevant fixes - If anyone could suggest a fix I would very much appreciate it. Thanks in advance

  Read the article

• Where should I go to learn about networking? [closed]

  - by Ollie Saunders

  I wonder if anyone could recommend resource or resources such as a good book that: explains how all the important protocols work and interact. I’m interested in those that are relevant in a typical home network and used over the Internet explains in detail how ADSL Internet connections work to the level of depth necessary so that I’m able to tweak and measure performance settings starts from the beginning but attempts to provide proper understanding rather than idiot-oriented steps to follow Basically, I’m interested in how these technologies work and tend to be implemented in hardware and software rather than “here’s what to do if…” I’m interested in Computer Networking by Andrew S. Tanenbaum and I wonder if anyone else has any experience with that title. It’s expensive but I could probably loan a copy for £3 from the library or so.

  Read the article

• Routing Essentials

  - by zharvey

  I'm a programmer trying to fill a big hole in my understanding of networking basics. I've been reading a good book (Networking Bible by Sosinki) but I have been finding that there is a lot of "assumed" information contained, where terms/concepts are thrown at the reader without a proper introduction to them. I understand that a "route" is a path through a network. But I am struggling with visualizing some routing-based concepts. Namely: How do routes actually manifest themselves in the hardware? Are they just a list of IP addresses that get computed at the network layer, and then executed by the transport? What kind of data exists in a so-caleld routing table? Is a routing-table just the mechanism for holding these lists of IP address (read above)? What are the performance pros/cons for having a static route, as opposed to a dynamic route?

  Read the article

• How to get access to console to reset Cisco 3750?

  - by genehack

  I acquired two Cisco 3750 switches from another part of my organization. I was able to complete the standard password/config reset procedure on one without any issues -- boot it, put it into express config mode, telnet in, reset the passwords, etc. The second one doesn't ever boot to the point where it displays anything on the console. When power cycled, the 'SYST' light flashes green a few times, then comes on a solid green and stays lit. None of the other lights ever flash or light up. Holding down the 'MODE' button for up to 30 seconds produces no noticeable effects. Nothing ever comes out on the console. Since I was able to configure the first one without any problems, I know my connectinon is good -- console port configured right, good cable, etc. Is this just a hardware problem with the switch? Is there any way I can recover from this and get the switch back into a state where I can configure it?

  Read the article

• How to tell if OpenGL is really working in Ubuntu 10.04

  - by Jonathan

  I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

  Read the article

• How do I SCP/FTP to a Coraid SR2421

  - by Pitto

  I need to save data to a Coraid SR2421. I am no expert and I'm trying to understand how this costy piece of hardware works. All I have is a Ethernet cable connecting my laptop and the coraid to a switch and the coraid's console with cursor blinking. Any kind of help would be greatly appreciated. edit and further explanation: I've tried using software on the coraid website but It's not working. So I've contacted the support and they sent me a file to upload on the coraid. It looks like if I upgrade coraid's firmware then I'll be able to use the coraid software on the windows side. That's why I'd need SCP/FTP or any kind of solution to copy a file in the partition that can be read from coraid console command line so I can launch the update command as requested. I hope I was a bit clearer now.

  Read the article

• How do I force a specific MTU for only certain TCP ports?

  - by Dave S.

  Background I have a set of embedded hardware deployed in the field. These remote machines connect back to my servers at AWS running Ubuntu and I use the iptables mangle chain to lower the MTU to 500 so these devices are happy. For reference, this is the iptables rule I am using: -A POSTROUTING -p tcp --sport 12345 --tcp-flags SYN,RST SYN -o eth0 -j TCPMSS --set-mss 500 Current Problem I'm trying to spin up some servers on the Joyent Cloud using SmartOS, but I can't find any information on selectively changing the MTU like I can on Linux (e.g. all info I've found is on changing it globally, which is not what I want). How would I do it so that all connections on TCP port 12345 get the MTU I want?

  Read the article

• Large file copy from NFS to local disk performance drop

  - by Bernhard

  I'm trying to copy a 200GB file from an NFS mount to a local disk. The local disk is an XFS filesystem on a LVM on top of a RAID 5 system (hardware RAID controler). I'm using rsync to monitor the transfer speed. At the beginning the IO speed is about 200MB/s, stable for the first 18GB. But then the performance drops by a factor of 10-20 and never recovers to the initial rate. Sometimes it reaches about 50-100MB/s but just for a few seconds and then the process seems to hang for a bit. At the same time all file-stat operations on the target filesystem are blocking for a long time (minutes). Also interrupting the copy process blocks for several minutes, a sub-sequent delete of the partly copied file takes also several minutes. Any ideas what could be causing this?

  Read the article

• Why do some PDFs lag in Adobe Acrobat?

  - by Coldblackice

  I have a handful of PDFs open. One of them in particular is extremely laggy, almost to the point of being unreadable. When I scroll through its pages, it's almost like an extreme version of v-sync being turned off. Very choppy. Overall system resources are plentiful, and all of the other PDFs cruise up and down with no stuttering or problems. I've tried closing and reopening the problem PDF to no avail. It's a small PDF, only 3MB in size, with no graphics (only programming code snippets). Surely, it must be some type of problem with the specific PDF (I'll try opening it in another PDF-viewing program, rather than Acrobat X). Possible corruption? Could there be some type of GPU/hardware-acceleration intervening going on? I've never heard of such with PDF-viewing.

  Read the article

• Converting a DWG/DXF to CSV or Excel

  - by Menno Gouw

  I'm using ZWcad and i need to get the coordinates of hundreds of blocks into a excel sheet or .CSV file so i can import that into the GPS hardware. I know there are plenty of tools for autocad, i probably can even write one myself but as far as ZWcad goes i seem to be out of options. However ZWcad saves to DWG too, and exports to all the other familiar cad extensions. So i was wondering if i would just save the blocks i need to export to a certain file there might be a tool/program to convert that directly into .CSV.

  Read the article

• How to customize Windows 7 HAL library during installation (BSOD STOP: 0x000000A5)?

  - by koldovsky

  While trying to install Windows 7 x86 Ultimate on Samsung M40 laptop (Pentium M 1.7 Dothan, 2 GB RAM/ 100 GB HDD) i receive BSOD STOP: 0x000000A5: The bios in this system is not fully ACPI compliant. Please contact your system vendor for an updated bios. The bios on the system is updated to latest version. If ACPI is the real source of the issue it means that I possibly could use another HAL library. In Windows XP it is possible to install system with generic HAL library pressing F7 when installer asks to supply drivers, but on Windows 7 I can't find such option. Ironically, Vista installs and works nice, even if they said that Windows 7 is less demanding for hardware. Windows 7 Advisor also tells nothing suspicious. Can anybody tell me how to customize Windows 7 installer to use generic HAL library (if it is possible, of course) or point me to another solution?

  Read the article

• Is there a way to enable metro on a 1024x600 netbook?

  - by scatmoi

  Windows 8 Consumer Preview works great on my 1024x600 netbook but, for some strange reason, Microsoft decided to provide its Metro interface only to 1024x768 and up screens. "Strange" because Android can work with as little as 240x320 screens, and I know that Microsoft is presumably targeting smartphones, too, in its upcoming Windows 8. The interface itself is there with all the panels etc. but when one of the rectangles is pressed, Windows 8 just refuses to launch any application (even Internet Explorer), except for Windows Explorer. Looks to me like this isn't a real hardware limitation but some arbitrary flag set in the registry. Is there any way or tweak to enable the Metro interface on 1024x600 screen?

  Read the article

• PC shut downs automatically after a second

  - by emzero

  I have this not-so-old computer that's not being used for a year or so. Specs: Motherboard: ASUS PN5-E SLI CPU: Intel Core2Duo E4300 RAM:2x2GB SuperTalent DDR2-800 VGA: Zogis GeForce 7950GT PSU: Vitsuba San-55-S 550w HD: No hardrives yet When I power on the computer, everything seem to start, but right away the whole system shuts down. I've removed and changed the RAM sticks, take out the VGA, everything I could think of. So what could it be causing this? The PSU? The motherboard is dead? The CPU? Any help to isolate the problem will be useful. Thanks PS: Please don't close the question, this could be helpful to anybody having a similar problem, even with different hardware.

  Read the article

• Difference between tc qdisc and netdev_max_backlog

  - by Mediocre Gopher

  I'm wondering what the difference between these two things on linux is. According to the docs tc qdisc can be used to set the queue size for egress and ingress packets coming in and out of the NIC (or that's how I understood it). But from what I understand netdev_max_backlog can also be used to set this. If I were to set both of them which would be used? Or are there actually two queues that are being manipulated in this case? If there are two queues, which queue is above the other (if the application is at the top and the hardware at the bottom)?

  Read the article

• emacs and putty on windows 7

  - by twilbrand

  My workstation was recently updated to Windows 7. I've downloaded putty and have configured it to the same settings I had under Vista. Whenever I ssh to a vm running Centos 5.4 and try to run emacs on a file, I'm getting an error about a connection to an X server: [ecto1 ~]$ emacs foo.bar Connection lost to X server `localhost:10.0' I never received this error message when I had Vista. I can get around it by aliasing emacs to 'emacs -nw', but I don't feel that I should have to do this. My co-worker has the same hardware that had the same upgrade and his sessions do not seem to be doing this. Any advice? I can't find anything on google and don't know where else to start. [ecto1 ~]$ emacs -version GNU Emacs 21.4.1

  Read the article

• Macbook Pro (SantaRosa) internal display not detected by graphics card, external monitor OK

  - by BLAU

  My MacBook Pro (2.4 Ghz, Santa Rosa with infamous nVidia card) acts strange. It shows the normal gray screen with Apple logo and animation flawlessly during start up but the internal display goes black without any rendering at all when all is loaded. (shining a light on display show nothing) If an external monitor is connected through the DVI port it will remain black during start up and then show the desktop as the internal display goes black. This happens both while booting to Mountain Lion and Windows XP. I have checked "About my Mac" and only the external display is listed. The same is the case if I use the nVidia Control panel in Windows XP. My questions: Is this a hardware problem or is it related to software maybe even firmware? What controls the display during start up, graphics card or something else?

  Read the article

• Difference in behavior of reboot

  - by LinuxPenseur

  Hi, I have 2 machines running linux. In one machine, the reboot command is an executable normally found in all linux distributions. In the second machine the reboot command is a shell script customized using some other hardware tool commands to reboot the system. One behavior difference between the 2 machines is that when i execute reboot command on the first machine, it shows another shell prompt and then only reboots. But in the case of second machine, it reboots without showing a shell prompt. I expect the second machine to behave the same way as first machine when reboot command is given. Currently i am analyzing the source code of shutdown.c and halt.c normally found in linux distributions, so that i can find out the implementation which produces the shell propmt on reboot and use that in the shell script in second machine. Kindly give me some pointers on where i should start looking to find the implementation. Thanks

  Read the article

• What has changed to make it possible to develop USB3.0

  - by RoboShop

  Like I know the transfer speeds are vastly different. But I don't understand is why they are faster. And why couldn't they have implemented USB 3.0 when they released 1.0? Like what technical breakthrough was required to get transfer speeds that fast? Was it cost? capacities of computer? like they couldn't read the data fast enough? Although USB is still well below hard drive transfer speeds engineering breakthrough? They found some new material which could transfer at a faster rate? Was this in the cable itself? In the hardware?

  Read the article

• OpenVZ multiple networks on CTs

  - by user6733

  I have Hardware Node (HN) which has 2 physical interfaces (eth0, eth1). I'm playing with OpenVZ and want to let my containers (CTs) have access to both of those interfaces. I'm using basic configuration - venet. CTs are fine to access eth0 (public interface). But I can't get CTs to get access to eth1 (private network). I tried: # on HN vzctl set 101 --ipadd 192.168.1.101 --save vzctl enter 101 ping 192.168.1.2 # no response here ifconfig # on CT returns lo (127.0.0.1), venet0 (127.0.0.1), venet0:0 (95.168.xxx.xxx), venet0:1 (192.168.1.101) I believe that the main problem is that all packets flows through eth0 on HN (figured out using tcpdump). So the problem might be in routes on HN. Or is my logic here all wrong? I just need access to both interfaces (networks) on HN from CTs. Nothing complicated.

  Read the article

• Having Troubles Getting My Apache Server Online(NodeJS and Apache)

  - by Jeff Armingol

  I am new here. This is my situation. I am using nodejs modules, serialport2 and socket.io, because I am trying to forward the data from my arduino hardware through serialports. In my server side script, I read the data then forward it to the client side. Now I am using Apache to serve the html page,which is the client side. I am running Nodejs on port 8000 and Apache on port 80. It is running OKAY when I view it in my browser typing localhost:80. The data is appearing and seems fine. Now when I tried to get my Apache server online using a Free DDNS provider(http://www.noip.com/) and my port80, it loaded the webpage but there are no data appearing on the page. What seems to be the problem here? Really need your expertise and advice. Thanks in advanced!

  Read the article

• How to make a quiet laptop?

  - by psihodelia

  Most modern laptops have very noisy fans. I am looking for a quiet laptop or a small stationary computer which has all its hardware built in a display. Most tasks will be PDF/docs processing, real-time audio processing, web-surfing and Skype video chats. Certainly, there is no any fan-less model today; but maybe some of the existed laptops do not switch on their fans so often or implement different solutions? For example, an iPad has no fan at all and it is fast enough for my needs, but it has no normal operating system, so I can't use it for anything but audio chats and web-surfing. Or maybe I can buy a laptop and tweak it to make it absolutely noiseless? Can you recommend any solution please?

  Read the article

• What is a preferred method for automatically configuring and setting up an Ubuntu instance?

  - by sutch

  I am tired of manually configuring instances of Ubuntu for testing web applications and for setting up workstations. I'm even more frustrated by the issues caused by inconsistent configurations. Is there a method (hopefully not too time consuming to learn and setup) that allows for automation of the setup and configuration of an Ubuntu server or workstation from an ISO. This is primarily for virtual machine instances, but it would be helpful to also create instances on hardware. I am specifically looking for a method to automate the installation of libraries (apt-get), configure services (such as Apache and MySQL), add 3rd party software (download, extract and build), and add libraries to scripting languages (for example, Ruby Gems or CPAN packages for Perl).

  Read the article

• Can a virtual mikrotik box bridge a hyper-v internal network with a hyper-v external network?

  - by mcfrosty

  I am trying to set up a Mikrotik router as a transparent firewall on my network. I got the machine working on a hardware MT box, but my boss wants the MT virtualized. I have been trying the set up where my virtual windows box talks to the Mikrotik via private or internal network on the Hyper-V host. I can get the two machines to talk, but as soon as I set up a bridge on the MT, all traffic ceases between the two. Is it possible to create a bridge for this purpose (having the MT silently in front of my firewalled server)? I could really use some help.

  Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >