Search Results

Search found 25181 results on 1008 pages for 'building computer'.

Page 191/1008 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

  • Install Windows XP/7 without a CD drive when the BIOS does not support booting from USB devices

    - by David Pearce
    I have a computer that has a dead CD drive in it and it seriously needs a new installation of Windows (XP is on it now, but Windows 7 does not sound that bad). At first I tried making a bootable USB drive, but it does not look like the BIOS supports booting directly from a USB drive. Is there some sort of boot loader that I can put onto the hard drive first and boot from the USB drive using that? If not, how else can I re-install Windows on the computer? Edit: The only bootable device the computer has it the network with PXE (although I have no idea how to do that) and it's three internal hard drives

    Read the article

  • Web Development - How to access custom host, defined in my hosts file, from another device in the same network

    - by Neara
    Ok, I hope i'll be able to explain the issue im experiencing. I'm working on a project, that has 2 parts: one takes all requests from usual localhost, the other handles requests from myhost.local. While trying to access both addresses from my computer, it works ok. But now i need to test myhost.local on mobile devices, connected to the same network. Usually i would just run server from my computer ip in the network: python manage.py runserver 10.0.0.8:8000 And then from any device, going to 10.0.0.8:8000 would show the project im working on. However, now accessing that ip address routes me straight to localhost. So, my question is how to access myhost.local from another device in same network? I don't want to change router settings, if that can be avoided, cos sometimes i work from places where i can't access router admin. Is there any network settings on my computer, that i can change to fix the routing to myhost.local w.o losing access to localhost as well?

    Read the article

  • Need Boxee/Vista remote control recommendations

    - by gurun8
    I have an Acer Aspire X1200 (specs link below) desktop computer that I've installed Boxee on and it works great. And it looks like it's going to be a perfect computer for a media player. It's small with lots of hard drive space and even has a HDMI output on it. http://support.acer.com/acerpanam/desktop/0000/Acer/AspireX1200/AspireX1200sp2.shtml I also have a Harmony® 880 Advanced Universal Remote (specs link below) that I'd like to use with the Acer computer. www.logitech.com/en-us/440/372 My thought is that I need to get a USB remote control adapter, right? So I did a quick Google search and found products from $5 to hundreds of $$$. Does anyone have recommendations? Things you like/dislike about certain remotes? This Acer is running Vista and has a AMD LIVE!: Athlon X2 dual-core processor. 64 bit some times makes it a little more difficult. Thanks for the help.

    Read the article

  • Speaking at the VS 2010 Launch at TechEd India this week

    Ill be speaking at TechEd India and the Visual Studio 2010 Launch in Bangalore, India this week. Ill be doing three sessions: Tuesday 2:30- Building RESTful Applications with the Open Data Protocol Wednesday 12:30-Building Applications with Silverlight 4.0 and WCF RIA Services Wednesday 2:30-Exploring the Silverlight 4.0 Business Features In addition, Team Telerik will be staffing a booth with Tee-shirts (hopefully if they get out of customs on time!) and live demos of our products and our brand new product to be announced today! See you at my sessions or at the booth! Technorati Tags: Telerik,TechEd Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • PASS Summit for SQL Starters

    - by Davide Mauri
    I’ve received a buch of emails from PASS Summit “First Timers” that are also somehow new to SQL Server (for “somehow” I mean people with less than 6 month experience but with some basic knowledge of SQL Server engine) or are catching up from SQL Server 2000. The common question regards the session one should not miss to have a broad view of the entire SQL Server platform have some insight into some specific areas of SQL Server Given that I’m on (semi-)vacantion and that I have more free time (not true, I have to prepare slides & demos for several conferences, PASS Summit  - Building the Agile Data Warehouse with SQL Server 2012 - and PASS 24H - Agile Data Warehousing with SQL Server 2012 - among them…but let’s pretend it to be true), I’ve decided to make a post to answer to this common questions. Of course this is my personal point of view and given the fact that the number and quality of session that will be delivered at PASS Summit is so high that is very difficoult to make a choice, fell free to jump into the discussion and leave your feedback or – even better – answer with another post. I’m sure it will be very helpful to all the SQL Server beginners out there. I’ve imposed to myself to choose 6 session at maximum for each Track. Why 6? Because it’s the maximum number of session you can follow in one day, and given that all the session will be on the Summit DVD, they are the answer to the following question: “If I have one day to spend in training, which session I should watch?”. Of course a Summit is not like a Course so a lot of very basics concept of well-established technologies won’t be found here. Analysis Services, Integration Services, MDX are not part of the Summit this time (at least for the basic part of them). Enough with that, let’s start with the session list ideal to have a good Overview of all the SQL Server Platform: Geospatial Data Types in SQL Server 2012 Inside Unstructured Data: SQL Server 2012 FileTable and Semantic Search XQuery and XML in SQL Server: Common Problems and Best Practice Solutions Microsoft's Big Play for Big Data Dashboards: When to Choose Which MSBI Tool Microsoft BI End-User Tools 360° for what concern Database Development, I recommend the following sessions Understanding Transaction Isolation Levels What to Look for in Execution Plans Improve Query Performance by Fixing Bad Parameter Sniffing A Window into Your Data: Using SQL Window Functions Practical Uses and Optimization of New T-SQL Features in SQL Server 2012 Taking MERGE Beyond the Basics For Business Intelligence Information Delivery Analyzing SSAS Data with Excel Building Compelling Power View Reports Managed Self-Service BI PowerPivot 101  SharePoint for Business Intelligence The Best Microsoft BI Tools You've Never Heard Of and for Business Intelligence Architecture & Development BI Power Hour Building a Tabular Model Database Enterprise Information Management: Bringing Together SSIS, DQS, and MDS SSIS Design Patterns Storing Columnstore Indexes Hadoop and Its Ecosystem Components in Action Beside the listed sessions, First Timers should also take a look the the page PASS set up for them: http://www.sqlpass.org/summit/2012/Connect/FirstTimers.aspx See you at PASS Summit!

    Read the article

  • Cloudcel: Excel Meets the Cloud

    - by kaleidoscope
    Cloudscale  is launching Cloudcel Cloudcel is the first product that demonstrates the full power of integrated "Client-plus-Cloud" computing. You use desktop Excel in the normal way, but can also now seamlessly tap into the scalability and massive parallelism of the cloud, entirely from within Excel, to handle your Big Data. Building an app in Cloudcel is really easy – no databases, no programming. Simply drop building blocks onto the spreadsheet (in any order, in any location) and launch the app to the cloud with a single click. Parallelism, scalability and fault tolerance are automatic. With Cloudcel, you can process realtime data streams continuously, and get alerts pushed to you as soon as important events or patterns are detected ("Set it and forget it"). Cloudcel is offered as a pay-per-use cloud service – so no hardware, no software licenses, and no IT department required to set it up. Private cloud deployments are also available. Please find below link for more detail : http://billmccoll.sys-con.com/node/1326645 http://cloudcel.com/ Technorati Tags: Tanu

    Read the article

  • How can I remove LibUSB on Windows 7?

    - by Cokegod
    I've installed LibUSB, a software that modifies your USB driver so that programs can access it easily. I didn't know that in Windows 7 you have to run it in compatibility mode for Windows XP, so now my Windows 7 can't access any USB port (including keyboard and mouse). Now I can't access my computer at all, and I don't have any PS2 connection in my computer. I tried to run it in Safe Mode but it didn't change anything. I tried to run a system restore from before the installation of LibUSB, but all the restore points give me an error: "The instruction at 0x73888f18 referenced memory at 0x00000004. The memory could not be read." I also tried to run Hiren's Boot CD and remove all the files associated with LibUSB, but that didn't change anything. So how can I remove LibUSB and access my computer again without formatting my hard drive? (I have important things on it)

    Read the article

  • Bios wont post unless I restart power supply.

    - by remy
    I have an annoying problem with a computer. The BIOS wont post after it has been turned off and started again unless I turn the switch off/on on the power supply. The fans, cdrom hdd and everything starts running but the bios never beeps and the monitor stays black. I HAVE TRIED: reinstalling windows xp, flashed bios to latest, cmos clear, new power supply, other hdd, new memory sticks, graphics card. I also removed the motherboard from the computer case and laid it on a cardboard box and only connected the PSU, RAM and CPU. Other than this the computer works great but its annoying having to off/on the power supply switch before turning it on after its been off. My guess is that the motherboard is faulty but I would just like to hear what you guys think. Sorry for my english / Remy

    Read the article

  • Testing a Virtualisation of a Debian Server (vmWare vSphere probably)

    - by xyza
    I'm soon getting access to a powerful root-server (quad-core, 16gb ram, 1gbit connection) where gameservers (like minecraft,counterstrike etc.) for different customers should be setup. My plan is to use programs such as vmWare vSphere to create some virtual machines for each customer. Inside such a virtual machine I'll setup the gameserver and maybe some kind of ftp server when its needed. Now that I'm kinda new to virtualisation of servers I want to test this local on my Desktop Computer. Is it possible to create a virtual machine of debian using vmWare Player on my Windows desktop computer and then install vmware vSphere in this VM to create multiple VM's inside that VM ? Or do I really need to install Debian on my desktop computer. (I want to use the time during installations etc. to work a bit at my windows installation) Some tips on virtualising debian servers are also appreciated :)

    Read the article

  • Route multiple subdomains on one external ip to multiple internal ips

    - by Abenil
    i have several subdomains(git.example.org, build.example.org, etc.), i have a router with an external ip and i have several virtual machines on a host computer with internal ips. Now i want to route git.example.org to internal ip 10.0.2.1 and build.example.org to internal ip 10.0.2.2. How can I do this? I setup in the Router that all traffic on port 80 is comming to my host computer with internal ip 10.0.2.3 and installed Squid on that computer. I added the following lines to the squid.conf file: cache_peer 10.0.2.1 parent 80 0 no-query originserver name=server_1 cache_peer_domain server_1 git.example.org cache_peer 10.0.2.2 parent 80 0 no-query originserver name=server_2 cache_peer_domain server_2 build.example.org But this is not working for me. :( Any help appreciated. Regards Nils Update: Here is the solution for Apache http://serverfault.com/a/273693

    Read the article

  • Removing a malware that sets up as a system driver

    - by ereOn
    Hello, I recently tried to fix up my mother's computer which has some serious malwares. One of them apparently registered itself as system driver (tjbijkoq.sys if that can help) and after running a malware suppression tool, the computer won't boot anymore, complaining about a "critical driver that is missing". I think deleting the matching entry in the registry would just solve the problem, but obviously I can't boot up the computer (even in safe mode) to fix it. Do you guys have any experience with such an issue and how to solve this ? Thank you very much. The operating system is Windows Vista 32 bits Professional

    Read the article

  • Allowing access to MPD from local network

    - by August Karlstrom
    I have successfully installed MPD (Music Player Daemon) on my desktop computer. Everything works fine when the client runs on the same machine as the server. Now I would like to access MPD from my laptop computer which is connected (wirelessly) to the local network. In order to allow access to MPD from any computer on the local network I have added this line to /etc/hosts.allow: mpd: .local and restarted MPD. Still I get the message "error: Connection refused" when I try to access MPD with MPC (Music Player Client) from my laptop. Any clues or troubleshooting hints?

    Read the article

  • Network? or router? problem

    - by Robert H Mercer
    I have two computers networked through a Netgear WG914 router which is connected to an Ipstar satellite modem via the RG47 LAN connector. The main computer is running Windows 7 Pro 64bit and the secondary computer is running Windows 7 Home Edition 32bit. On occasion there is a loss of internet connection usually on the main computer, often followed by a loss on the secondary comuter. Not, however, always the case. Windows troubleshooter, naturally, is about as much use as a politician in government.......NONE. There appears to be no problem with the ISP bad as it is and often the connection will be remade without any help from me. The difference in the OS's is not of any relevance since I had this problem before I changed over to Windows 7. Not being a nerd when it comes to networking I wonder if anyone has any constructive suggestions.

    Read the article

  • Network Drive Via Ethernet Port for Speed?

    - by Yar
    I have a Macbook with Firewire 400 and USB 2.0, so the only way I can get fast external storage is through the Ethernet port. A really fast firewire 800 drive on ANOTHER computer is actually much faster than the built-in drive (according to XBench). So I thought I would try to go one better and buy an ethernet-ready drive. I bought a Seagate GoFlex™ Home Network Storage System, and it seems like the only way to get it to work is to plug it into a router. Can this drive be used without a router (i.e., direct to computer)? Are there any drives that can be plugged directly into the ethernet port for fast access? I don't want the drive on my router: I want it on my computer. Ideally I'd need 7200rpm or faster, too... Update: Just chatted with Seagate and they said that this particular drive will not work that way. Will any others?

    Read the article

  • Clonezilla , NLite and PCs with different hardware specs

    - by r2b2
    I used Clonezilla to create and restore images from a master computer to other workstations with the same specs. But the problem now is there are new computers whose hardware specs are different than the ones I maintained (mostly the videocard is different). Is it possible to create a customize Windows XP installer using Nlite and integrate all potential videocard and motherboard drivers ? If I then used this NLite ISO to install to a master computer which i will later clone and restore the image to other workstations, will windows xp still pick up the correct driver set? During XP installation, does the installer transfers all the drivers to the computer's harddisk? Thanks! Ryan

    Read the article

  • VPN/Proxy server to bypass work proxy

    - by Trevor
    Here is my dilema, I am at work and can not set up a VPN connection to my VPN account in the USA. So what I would like to do is somehow have my "IE" at work connect to my home network and route any internet requests through my home PC to my VPN account, so I can access my USA Contents? So what I was thinking and I am not sure if this will work, but set up a proxy server at home on my home computer, that then routes all requests to my VPN Tunnel to the USA. Have my work computer use my home computer as the proxy and viola I have unrestricted internet access? Does that sound feasable? Thanks.

    Read the article

  • Have Windows Automatically Login Without Entering Your Password

    - by deadlydog
    If you are like me and don't want to have to enter your password each time Windows loads, you can have Windows start up without prompting you to enter a user name or password.  The simple (and BAD) way to do this is to simply not have a password on your user account, but that’s a big security risk and will allow people to easily remote desktop into your computer. So, first set a password on your windows account if you don’t already have one.  Then select Run... from the start menu (or use Windows Key + R to open the Run window) and type control userpasswords2, which will open the user accounts application.   On the Users tab, clear the box for Users must enter a user name and password to use this computer, and click on OK. An Automatically Log On dialog box will appear; enter the user name and password for the account you want to use to automatically log into Windows.  That's it.    You may also want to make sure your screen saver is not set to prompt you for a password when it exits either. Now your computer is secure without getting in your way.

    Read the article

  • Google I/O 2012 - High Performance HTML5

    Google I/O 2012 - High Performance HTML5 For years we built web apps that far outpaced the capabilities of the browsers they ran in. Just as the browsers were catching up HTML5 came on the scene - video and audio, canvas, SVG, app cache, localStorage, @font-face, and more. Now the browsers are racing to stay ahead of the wave that's building as developers adopt these new capabilities. Is your HTML5 app going to ride the wave or be dashed on the rocks leaving users stranded? Learn which HTML5 features to seek out and which to avoid when it comes to building fast HTML5 web apps. This session will be live captioned. From: GoogleDevelopers Views: 91 1 ratings Time: 01:02:07 More in Science & Technology

    Read the article

  • Install Ubuntu in UEFI mode (unable to boot from USB)

    - by Adele
    I recently bought a Dell Inspiron 15R SE with Windows 8 (64 bit) pre-installed (UEFI supported). I want to install Ubuntu in dual boot with Windows 8. I tried to follow all instruction here : https://help.ubuntu.com/community/UEFI And here : Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) So, I set Secure Boot to "off" into BIOS and I disable Fast Startup as described here : http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html I created a bootable USB key for Ubuntu (Ubuntu 13.10 64bits international Edition) with Unetbootin. The problem is I am unable to boot from the USB key. The computer tries to boot into infinite loop. I also tried to boot from USB with "Legacy Boot" option instead of UEFI. In this case, the computer says there are no bootable devices. Of course, I tried to boot from my USB key on an other computer having normal BIOS and it works perfectly. Have you ideas about what I need to do to be able to boot from USB ? Thanks in advance for your help, Adele

    Read the article

  • Setup IPv6 over IPv4 tunnel in VPN

    - by bfmeb
    Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B has a local ipv6 address and there are resources (each of them with a local ipv6 address) connected to Router B. After I am connected to VPN, I am able to use ssh to have access over A. Now I can use the ping6 command to ping the Router B or one of its connected resources. This works fine. The ping fails if I try to ping router B on my computer. Overview: My Computer -- VPN -- Server A(ipv4) -- Router B(ipv6) -- Ressource A(ipv6) On resource A runs for example a HTTP-Server. My question is: How can I access Resource A (for example with HTTP) on my to VPN connected computer? Is it possible? Should I setup a tunnel device? Sorry for this inexpertly explanation, but I am new to network stuff!

    Read the article

  • Blocked port 25 on Windows 7 64 bit

    - by Michal Gow
    Strange problem. I have 2 computers connected to Wifi router. One with Windows Vista & second with 2 operating systems: SUSe Linux and Windows 7 64bit on it. Computer with Vista can connect to SMTP server of my email provider (and any other) using port 25, and can connect to a mail server using telnet mail.server.com 25 if this port is open. Computer with dual operating system can (using Linux) do the same. The same computer, with the same hardware (Wifi card etc.), and using the same WiFi router, cannot however use Port 25 and cannot Telnet into any smtp server. So the problem is in Windows 7. I did uninstall all antivirus software and disabled the firewall. The problem is still here. Is there way how find out which software is blocking this port?

    Read the article

  • Adding files and folders to a Root Folder (inode/directory)

    - by xBaldwin
    Ok so I'm fairly new to Ubuntu and wasn't even the one who put it one this computer(my friend did while I was storing it at his house because I was in the middle of transitioning between houses), but It's on here so I need to learn what I can so I can use it more effectively. My question at the moment is "Would it be safe to add files/folders to a folder (inode/directory) that requires Root access?" I continue to be informed by the system that the directory I am using is running low on space which I found odd seeing how I should have a lot more room on this computer. That's when I started looking at the directories and found that there are two with a bunch of un-used space on them. One says it has 46.9 GB of free space and the other has 24.9 GB of free space. Seems like a complete waste to not use that space and yet they both say they require Root access to add to them. I know that Root folders and files are normally all system folders and files. I also know that changing or deleting them can mess up the computer which right now I cant afford to do. I just don't know if it would mess anything up to add something to those folders. Thank you in advance to anyone who takes the time to reply and try to teach me about how all that works. I really do appreciate it and will do the same if by some crazy (completely unlikely) reason I have an answer to your question. :-)`

    Read the article

  • One vs. many domain user accounts in a server farm

    - by mjustin
    We are in a migration process of a group of related computers (Intranet servers, SQL, application servers of one application) to a new domain. In the past we used one domain user account for every computer (web1, web2, appserver1, appserver2, sql1, sqlbackup ...) to access central Windows resources like network shares. Every computer also has a local user account with the same name. I am not sure if this is necessary, or if it would be easier to configure and maintain to use one domain user account. Are there key advantages / disadvantages of having one single user account vs. dedicated accounts per computer for this group of background servers? If I am not wrong, one advantage besides easier administration of the user account could be that moving installed applications and services around between the computers does not require a check of the access rights anymore. (Except where IP addresses or ports are used)

    Read the article

  • Free book from Microsoft: - Exploring CQRS and Event Sourcing

    - by TATWORTH
    At http://www.microsoft.com/en-us/download/details.aspx?id=34774, Microsoft are providing a free book on Exploring CQRS and Event Sourcing"This guide is focused on building highly scalable, highly available, and maintainable applications with the Command & Query Responsibility Segregation and the Event Sourcing architectural patterns. It presents a learning journey, not definitive guidance. It describes the experiences of a development team with no prior CQRS proficiency in building, deploying (to Windows Azure), and maintaining a sample real-world, complex, enterprise system to showcase various CQRS and ES concepts, challenges, and techniques. The development team did not work in isolation; we actively sought input from industry experts and from a wide group of advisors to ensure that the guidance is both detailed and practical. "

    Read the article

  • Remote Install Mac OS X from Windows not on LAN?

    - by Frost Shadow
    I want to install applications from my Mac OS X install disc, or be able to archive-install from it, but it's back at my house outside my current LAN. Is there a way I can remotely access my OS X install disc on my home Windows XP computer from my Snow Leopard? In my help manual it says I can do remote installs, or use another computer's disc drive remotely, but it has to be with another computer on the LAN. Is there a way to combine my mac's LAN and my windows' LAN? I think it has something to do with making a VPN; is there a way to do that which will work between Snow Leopard and XP, doesn't require additional hardware, and is preferably free? Thanks a lot!

    Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >