Search Results

Search found 5628 results on 226 pages for 'cpu hogging'.

Page 191/226 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

• I think my laptop just died

  - by Joel Coehoorn

  I have a Dell 1330M that as of about 15 minutes ago will no longer POST. What happened was I was working, stepped away for a moment, and when I came back it was turned off. I thought that was odd, but turned it on and things seemed fine. About 1/2 hour later it crashed and restarted, but came up fine again. It did this once more. At this point I was starting to get worried, but I hadn't had any problems with the laptop before and every crash was after doing some work in a virtual machine that I don't often use, so I at put the blame there. It didn't feel like it was overheating anywhere and there's no ozone smell of overheated electronics. Then it crashed a final time and now when I turn it on all I see is a bright screen with a bunch of vertical lines (noise). I've tried removing the memory sticks one at a time, but I get the same result with either memory stick in either slot. With no memory at all it stops earlier in the POST process and the screen is completely blank (black, no backlight). As I type this, I hear a double beep from the system about once every 10 minutes. I'm pretty sure the hard drive is fine because it fails during post, before anything off the drive is needed. The power supply seems good because the screen is nice and bright. It's not the RAM because swapping that around made no difference. The leaves motherboard (which I doubt and can replace) and CPU (which just might be changable). Any ideas? Is there any hope for this laptop? I'm rather fond of it and I'd have a hard time replacing it with anything near as nice.

  Read the article

• I have a perl script that is supposed to run indefinitely. It's being killed... how do I determine who or what kills it?

  - by John O

  I run the perl script in screen (I can log in and check debug output). Nothing in the logic of the script should be capable of killing it quite this dead. I'm one of only two people with access to the server, and the other guy swears that it isn't him (and we both have quite a bit of money riding on it continuing to run without a hitch). I have no reason to believe that some hacker has managed to get a shell or anything like that. I have very little reason to suspect the admins of the host operation (bandwidth/cpu-wise, this script is pretty lightweight). Screen continues to run, but at the end of the output of the perl script I see "Killed" and it has dropped back to a prompt. How do I go about testing what is whacking the damn thing? I've checked crontab, nothing in there that would kill random/non-random processes. Nothing in any of the log files gives any hint. It will run from 2 to 8 hours, it would seem (and on my mac at home, it will run well over 24 hours without a problem). The server is running Ubuntu version something or other, I can look that up if it matters.

  Read the article

• What may be wrong with String::ToIdentifier::EN tests?

  - by wk01

  I try to install Perl module String::ToIdentifier::EN (as depndency of DBIx::Class::Schema::Loader) but it fails on tests. I googled those errors but get no picture, where is problem: Building and testing String-ToIdentifier-EN-0.07 cp lib/String/ToIdentifier/EN.pm blib/lib/String/ToIdentifier/EN.pm cp lib/String/ToIdentifier/EN/Unicode.pm blib/lib/String/ToIdentifier/EN/Unicode.pm Manifying blib/man3/String::ToIdentifier::EN.3pm Manifying blib/man3/String::ToIdentifier::EN::Unicode.3pm PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/00_basic.t t/10_ascii.t t/20_capitalization.t Byte order is not compatible at ../../lib/Storable.pm (autosplit into ../../lib/auto/Storable/_retrieve.al) line 380, at /home/wanradt/perl5/lib/perl5/Lingua/EN/Tagger.pm line 167 # Looks like you planned 25 tests but ran 4. # Looks like your test exited with 25 just after 4. t/00_basic.t ........... Dubious, test returned 25 (wstat 6400, 0x1900) Failed 21/25 subtests Byte order is not compatible at ../../lib/Storable.pm (autosplit into ../../lib/auto/Storable/_retrieve.al) line 380, at /home/wanradt/perl5/lib/perl5/Lingua/EN/Tagger.pm line 167 # Looks like you planned 768 tests but ran 512. # Looks like your test exited with 25 just after 512. t/10_ascii.t ........... Dubious, test returned 25 (wstat 6400, 0x1900) Failed 256/768 subtests t/20_capitalization.t .. ok Test Summary Report ------------------- t/00_basic.t (Wstat: 6400 Tests: 4 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 25 tests but ran 4. t/10_ascii.t (Wstat: 6400 Tests: 512 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 768 tests but ran 512. Files=3, Tests=528, 1 wallclock secs ( 0.07 usr 0.02 sys + 0.42 cusr 0.04 csys = 0.55 CPU) Result: FAIL Failed 2/3 test programs. 0/528 subtests failed. make: *** [test_dynamic] Error 255 -> FAIL Installing String::ToIdentifier::EN failed. See /home/wanradt/.cpanm/build.log for details. Byte order is not compatible at... seems a key, but to where?

  Read the article

• Application that will identify percentage of your system disk bandwidth used on a user-application by user-application basis?

  - by Warren P

  I always (subjectively) feel my computer is far too slow (however fast it is), and so I'm always looking for ways to measure and understand what my computer is actually doing, that is making it seem "slow" to me. It has been my observation that my software-developer workload is most often disk-bound (I am waiting for Disk I/O) more than CPU bound. What has made it worse, is that I am using a corporate PC that has in-memory active-scanning anti-virus software that I do not have control over, and also some IT department mandated services that seem to suck up a lot of available hard-disk bandwidth. The best tool I have seen (in Windows 7) is the Resource Monitor which I usually acess from the button in the task Manager. The disk IO page, however, seems to label Disk Activity at a very low level (for example, showing the Volume Shadow Storage, which is flushing information obviously written by something ELSE other than VSS itself, and then writes to Pagefile.sys, which are obviously due to Virtual Memory faults in some application). What I would like to know is if a utility exists that can add up all direct disk input and output by user-level process, or find the process or service that caused VM or VSS activity. In that way, I hope, you could establish a real idea of how much of your computer's precious disk subsystem bandwidth is attributable to a particular application. here's a scenario: MyApp.exe writes 100k/s and reads 100k/s directly. VSS ends up writing another 100k/s. pagefaults caused inside MyApp.exe cause another 100k/s of writes. So the total "cost" of MyApp.exe running, during a period of time (let's say 1 second) is 400k/s, whereas you can only directly observe half of that, in Resource Monitor. Is there a smarter disk-IO watching piece of software I can use?

  Read the article

• toshiba a200 laptop hangs/freezes when plugged in

  - by tapan

  The subject says it all. It is the exact same problem as described here. I had asked a similar question before here. My system specs etc, everything is here. My problem is just that I cannot afford to get it fixed right now. I just need for the laptop to be kind of usable for 2-3 more months. It worked perfectly for 3 months or so in ubuntu recovery mode. Now it hangs/freezes every hour. I spend 8 hours a day on an average on my laptop. So i just want it to last at least that long. If the laptop is not plugged in in recovery mode / regular ubuntu mode, it freezes in 5 mins and the screen becomes all weird. With my windows 7 OS, it works perfectly on battery but hangs instantly as soon as it is plugged in. Also now, a high cpu usage doesn't help anymore. Any strategy or suggestions i could employ to extend the duration for which it doesn't freeze ?

  Read the article

• IIS 7 much slower than IIS 6

  - by JoeJoe

  I have a asp.net 3.5 web application running fine on Windows2003 IIS6. I published same exact application to IIS7.5 (Win2008R2) on a faster box (i5,8Gram) and it is significantly slower. 5-6 sec per page vs. 1-2 sec per page. During that time the Task Mgr CPU is always under 10%. Both attach to same database on other box. Benchmark is consistent from any other client browser or machine. I have connection pool on both, compression on both. Same network subnet. Forms authentication (no SSL yet). Can you give me steps on how to troubleshoot where the delays are being inserted or settings in IIS7 that I may have overlooked. Just using defaults. There is only 1 web site on each box. I understand the roles of an Application as defined in IIS has changed. There is no special Application defined in IIS.

  Read the article

• VLC Crash when playing MKV files in Windows 7

  - by Phelios

  I'm not sure if the mkv file is corrupted, but when it is opened with VLC player, VLC loads up and displays nothing. Can't even close VLC after that. And also, VLC is running with 50% of the CPU. I have to use End Process to kill it. How do I know if the file is corrupted? How do I solve this? info from mediainfo Format : Matroska File size : 69.4 MiB Duration : 21mn 48s Overall bit rate : 445 Kbps Encoded date : UTC 2009-11-20 18:33:49 Writing application : mkvmerge v2.9.7 ('Tenderness') built on Jul 1 2009 18:43:35 Writing library : libebml v0.7.7 + libmatroska v0.8.1 Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : [email protected] Format settings, CABAC : Yes Format settings, ReFrames : 2 frames Format settings, GOP : N=1 Codec ID : V_MPEG4/ISO/AVC Duration : 21mn 48s Width : 640 pixels Height : 352 pixels Display aspect ratio : 16:9 Frame rate : 23.976 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Audio ID : 2 Format : AAC Format/Info : Advanced Audio Codec Format profile : HE-AAC / LC Codec ID : A_AAC Duration : 21mn 48s Channel(s) : 2 channels Channel positions : Front: L R Sampling rate : 48.0 KHz / 24.0 KHz Compression mode : Lossy

  Read the article

• PHP unable to allocate memory.

  - by AlReece45

  On my way to the office this morning, every website on our shared VPS started giving the same error (several times, not the typical memory_limit error which is fatal): Warning: Unknown: Unable to allocate memory for pool. in Unknown on line 0 The shared server is a 64-bit OpenVZ container running cPanel. There are only ~6 VPSes on the host-- this is the largest one at only 4GB. The host itself has 24GB RAM. As the below graphs show, the memory usage on the host and VPS are both rather low. CPU Usage/Disk/Host all seem to be normal. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. Apache 2.2, PHP 5.2 (mod_php) Restarting Apache has corrected the problem for now. However, I'd like to prevent it from happening again and I'm not sure what was limiting the memory. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. There's seems to be plenty of memory: what caused this error? VPS Memory Usage Host Memory Usage APC Information apc.ttl=0 apc.shm_size=0 apc.mmap_file_mask=(blank) 1 Segment(s) with 32.0 MBytes (mmap memory, pthread mutex locking)

  Read the article

• Anyone have real world experience with Rackspace Cloud Sites at high scale?

  - by Allara

  I have a pure web service application layer using .NET. I was originally planning to use Amazon EC2, but rolling my own autoscaling procedures is a bit intimidating, and the scaling isn't very granular from a cost perspective. If the app is successful, we could be looking at relatively high scale (millions of requests per month). The app uses Amazon SimpleDB as the database layer. As a test, I have the app running successfully in Rackspace Cloud Sites. Performance seems to be equal to (if not better than) a standard EC2 instance, even with the added latency of the SimpleDB requests travelling to the Rackspace network. However, testing at this stage is at a very low scale. My question is this: has anyone had real-world experience running a high scale application on Rackspace Cloud Sites? Moreover, once you pass the "included" 10,000 compute cycles per month, does the overall cost seem to be lower than rolling lots of EC2 instances? My assumption would be that with completely smooth scaling (i.e. only adding compute resources as needed), the cost could be lower on average. However, their stated goal of calibrating 10,000 CCs as a single 1.2 Ghz CPU seems on average to be much more expensive than EC2. I like the idea of no-touch scaling, but is it too good to be true?

  Read the article

• Why is piping dd through gzip so much faster than a direct copy?

  - by Foo Bar

  I wanted to backup a path from a computer in my network to another computer in the same network over a 100MBit/s line. For this I did dd if=/local/path of=/remote/path/in/local/network/backup.img which gave me a very low network transfer speed of something about 50 to 100 kB/s, which would have taken forever. So I stopped it and decided to try gzipping it on the fly to make it much smaller so that the amount to transfer is less. So I did dd if=/local/folder | gzip > /remote/path/in/local/network/backup.img.gz But now I get something like 1 MB/s network transfer speed, so a factor of 10 to 20 faster. After noticing this, I tested this on several paths and files and it was always the same. Why does piping dd through gzip also increase the transfer rates by a large factor instead of only reducing the bytelength of the stream by a large factor? I'd expected even a small decrease in transfer rates instead, due to the higher CPU consumption while compressing, but now I get a double plus. Not that I'm not happy, but just wondering. ;)

  Read the article

• Strange boot problems on 6 month old setup

  - by Balefire

  I've already exhausted my knowledge on this one, so forgive me if this post is a bit long. I built a computer 6 months ago for my wife and it worked fine until last week. Then it randomly shut down and would lock up while trying to boot on the boot screen. I cleared cmos and it allowed me to do startup recovery, but it "failed to fix the issue" so I reinstalled windows on the HD (moving the old install to windows_old). It worked, so I started installing drivers again, but then when I restarted to finalize installations it locked up again. This time, I took the hard drive and hooked it up to my computer, backed up all her files, and then formatted the hard drive before reinstalling it. (again had to clear cmos to let me boot from disk) It installed windows, I installed drivers, and it worked for a few hours but then died during startup again. So, then I got a new HD, cleared cmos, and installed clean again, with the same result as the time before, it worked for a few hours, installed windows updates, then crashed on the 3rd or 4th time turning it on. I decided next to try reinstalling and then going online to see if there were any updates for the BIOS or drivers on the Motherboard, but now I can't get it to even bring up the boot menu, so now I'm just left wondering was it the motherboard, or is it the CPU, or the RAM? The problem was strangely intermittent so I thought it had to be a software issue, since a hardware issue would ALWAYS fail to boot, right? But now it seems to be a hardware issue, because it's not bringing up anything. Any suggestions? System: Windows 7 64-bit 970A-DS3 Gigabyte Motherboard AMD Phenom II X4 955 Deneb 3.2GHz Quad core Proc GeForce GT 430 (Fermi) 1GB Video Card 500W PSU 2 x G.SKILL Ripjaws X Series 4GB 240-Pin DDR3 1600 RAM

  Read the article

• HPET missing from available clocksources on CentOS

  - by squareone

  I am having trouble using HPET on my physical machine. It is not available, even though I have enabled it in my bios, forced it in grub, and triple checked my kernel to include HPET in its compilation. Motherboard: Supermicro X9DRW Processor: 2x Intel(R) Xeon(R) CPU E5-2640 SAS Controller: LSI Logic / Symbios Logic SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03) Distro: CentOS 6.3 Kernel: 3.4.21-rt32 #2 SMP PREEMPT RT x86_64 GNU/Linux Grub: hpet=force clocksource=hpet .config file: CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_HPET=y dmesg | grep hpet: Command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet Kernel command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet cat /sys/devices/system/clocksource/clocksource0/current_clocksource: tsc cat /sys/devices/system/clocksource/clocksource0/available_clocksource: tsc jiffies What is even more confusing, is that I have about a dozen other machines that utilize the same kernel .config, and can use HPET fine. I fear it is a hardware issue, but would appreciate any advice or help with getting HPET available. Thanks in advance!

  Read the article

• Can I install windows on an SSD and access data from my old windows HDD?

  - by nzifnab

  I purchased new computer components, switching my hardware from AMD and Radeon to Intel and Nvidia. I kept components from my old computer like the powersupply and two HDDs. Everything appeared to install correctly and the system booted into the BIOS just fine (after a brief snafu with the CPU fan). My goal was to use the two harddrives and just be able to turn on the computer and load up my old windows install with all the files, programs, and documents. I expected to have to call Microsoft to re-register the windows install for the new hardware (since I had to do that last time I upgraded w/ the same windows version). When the computer attempts to boot into windows it briefly flashes a bluescreen and then restarts. System recovery gives a message something like "BadDriver Failover" something something. I assume this is because it's trying to use amd drivers for an intel chipset (or something...?) and I've been as-yet unsuccessful in getting it to boot into my old windows partition. SO! I decided eff it, maybe I'll go visit my nearest Micro Center and buy a 200 GB SSD, install windows onto that, and then... be able to access just the contents of both of my other harddrives? I don't intend on running any of the programs but there were some saved files I would like to salvage from the 500 GB harddrive, The 1.5 TB harddrive only had files on it, no OS or applications so I'd also expect to still be able to access it. Is this possible? Can I install the SSD and only format/install windows onto it and still access the contents from my two transferred-over drives?

  Read the article

• Computer wont start, just blinks on and off

  - by Ryan

  This is really strange. I had a comp that was working fine for over a year, then suddenly it started to shut off, it got so bad that I press the power button and in around 30 secs while booting windows it would shut off, then 20 secs... then 10 secs, then it refused to start all together. So I bought a new PSU (850w Thermaltake, the old one was 550w corsair) thinking that was the problem, I fitted the new PSU now and its the same thing, I press the power button and my fans start for a split second (they have led lights on them, so the lights come on) and then everything goes off again. I thought maybe it was my power button that was loose on my comp, luckily I had another chassis near by so I disconnected the powerSW from the old one and put ran the powerSW from the new chassis, press the power on the new chassis and same thing, it blinks for a split second and off again. Double checked connections from the PSU to the cpu power as well as board mobo power, its tight. It's pretty unlikely both the PSUs have the same exact problem so am lost... Suggestions?

  Read the article

• System randomly freezes yet mouse still moves

  - by user784446

  This problem has lasted for the past 48 hours. The first time it happened, a program I was running stopped responding, so I tried to end it from task manager. The processes at first were listed fine until hovered upon. Eventually, despite the mouse still being able to move, after a few persisting clicks the mouse finally stopped moving. The screen went blank shortly thereafter. The second time it occurred, items on the screen stopped responding - hovering over the taskbar or such wouldn't elicit a response. Sound would still play however. Eventually, the mouse became unresponsive and the system restarted itself. I suspect that it may be a problem of my SSD drive. After looking through some Google search results, I downloaded HDTunePro to determine if there's a problem with the drive. Results returned a problem of reallocated sector count. An error scan also revealed 48 bad sectors. Also, an attempt to backup the contents of the most important areas of the drive returned a few explorer "Error: cannot read source from disk" errors. Should I ditch the drive and use another drive or is there anything that can be done to repair the drive? SSD: OCZ Petrol 64gb CPU: AMD Athlon II X4 640 RAM: Generic 3GB DDR2 Motherboard: Gigabyte MA74GM-S2H OS: Windows 7 Ultimate x64 Thanks!

  Read the article

• Why is my rsync so slow?

  - by iblue

  My Laptop and my workstation are both connected to a Gigabit Switch. Both are running Linux. But when I copy files with rsync, it performs badly. I get about 22 MB/s. Shouldn't I theoretically get about 125 MB/s? What is the limiting factor here? EDIT: I conducted some experiments. Write performance on the laptop The laptop has a xfs filesystem with full disk encryption. It uses aes-cbc-essiv:sha256 cipher mode with 256 bits key length. Disk write performance is 58.8 MB/s. iblue@nerdpol:~$ LANG=C dd if=/dev/zero of=test.img bs=1M count=1024 1073741824 Bytes (1.1 GB) copied, 18.2735 s, 58.8 MB/s Read performance on the workstation The files I copied are on a software RAID-5 over 5 HDDs. On top of the raid is a lvm. The volume itself is encrypted with the same cipher. The workstation has a FX-8150 cpu that has a native AES-NI instruction set which speeds up encryption. Disk read performance is 256 MB/s (cache was cold). iblue@raven:/mnt/bytemachine/imgs$ dd if=backup-1333796266.tar.bz2 of=/dev/null bs=1M 10213172008 bytes (10 GB) copied, 39.8882 s, 256 MB/s Network performance I ran iperf between the two clients. Network performance is 939 Mbit/s iblue@raven $ iperf -c 94.135.XXX ------------------------------------------------------------ Client connecting to 94.135.XXX, TCP port 5001 TCP window size: 23.2 KByte (default) ------------------------------------------------------------ [ 3] local 94.135.XXX port 59385 connected with 94.135.YYY port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec

  Read the article

• Slow, choppy video playback with nVidia 8600GT

  - by user5351

  I have an nVidia 8600GT card (made by EVGA) on a machine with Windows Vista (AMD Athlon X2 processors) and four gigs of ram. It runs pretty good, but I have had some slow/choppy/stuterring video playback issues whenever watching flash videos on Youtube or other sites. The problem is there with both Firefox and IE flash videos, but is maybe worse with Firefox. I also tried Linux with nVidia's binary drivers and it was about the same. I downloaded EVGA precision which allows me to control stuff like the fan and clock speed. The card's temp (in both Vista and Linux) is usually at 66C when idle (not playing a game or watching anything). It goes up a little when watching a video (maybe 68-72C). Any ideas on how to fix this? UPDATE: The issues are both with full screen and embedded flash videos. I have Flash 10.0.32.18 (always make sure I use most recent for security), and the CPU is an AMD Athlon 64 X2 Dual Core Processor 4000+ at 2.11 GHZ. The current GPU driver installed is the most recent GeForce one from last July.

  Read the article

• What can inexperienced admin expect after server setup completed seemingly fine? [closed]

  - by Miloshio

  Inexperienced person seems to have done everything fine so far. This is his very first time that he is the only one in charge for LAMP server. He has installed OS, network, Apache, PHP, MySQL, Proftpd, MTA & MDA software, configured VirtualHosts properly (facts because he calls himself admin), done user management and various configuration settings with respect to security recommendations and... everything is fine for now... For now. If you were directing horror movie for server admin above mentioned what would you make up for boogieman that showed up and started to pursue him? Omitting hardware disaster cases for which one cannot do anything 'from remote', what is the most common causes of server or part-of-server or server-related significant failure when managed by inexperienced admin? I have in mind something that is newbie admins very often missing which is leading to later intervention of someone with experience? May that be some uncontrolled CPU-eating leftover process, memory-related glitch, widely-used feature that messes up something unexpected on anything like that? Newbie admin for now only monitors disk-space and RAM usage, and number of running processes. He would appreciate any tips regarding what's probably going to happen to his server over time.

  Read the article

• WINDOWS: Your computer hangs. You can windows + R (run dialog) but performance is so halted taskMGR

  - by John Sullivan

  The question is, what process are available to try to recover from total system instability before pulling the plug when we can do nothing but programs or batches in the path from the run dialog (windows + r key), and performance is so dead that taskMGR / procEXP / other programs with visual guis are not usable? I am not a windows expert, but ideally someone out there has written a program that does more or less stuff like this: Immediately set (or perhaps I can set from the run prompt) its priority to extremely high, evaluate performance bottlenecks. E.g. is CPU 100%? If so identify offending program(s) or problems. Attempt / log fixes, then provide crude feedback asking the user if his performance has stabilized enough to abort, wait a few seconds, if no feedback continue, etc. etc. Eventually try to do any "system cleanup" if the program decides it cannot recover and perhaps finally provide a series of beeps to the user, or what have you, to say "OK, I give up, time to pull the plug". Ideally create a log, when able. These kinds of horrible hangs are a situation where surely trying something, anything, is better than nothing -- as long as that something is intelligent -- when the alternative is ripping out the power coord. Again, I am not a windows expert, so perhaps there is a much more elegant "hands on" approach I am not aware of.

  Read the article

• Why is my computer randomly restarting? How can I fix it?

  - by kinglime

  I have a custom built desktop computer that I've been using since about a year ago. The main specs are: ASUS P8Z68-V LE Motherboard Intel Core i7 2600k Corsair Vengeance 16GB Ram ASUS ENGTX570 GPU Corsair TX650M PSU I was running an overclock of 4.4ghz for my cpu (I have a Hyper212 EVO) and 1600mhz for my RAM but have it currently turned off due to my issues. I am also currently running Windows 8 but this problem occured in Windows 7 too. Basically my issue is that seemingly randomly, with no pattern my PC will reset itself and ASUS Anti-Surge will alert me that something went wrong. This issue is not related to system stress. I can run it fine for an hour maxxed out on Prime95 then later I can be watching a mere YouTube video when it will randomly reset. This has been occurring probably for the last two weeks and it seems to be getting worse. I believe this might be related to the power supply but when I monitor it in the bios and in Windows it appears to be putting out the proper voltages. Also possibly related or not but my Nvidia drivers frequently temporarily fail and then warn me of some kind of kernel error? If I have to buy a new power supply that is what I'll do but I want to make damn sure that's the only issue at hand. Thank you everyone in advance, please help me diagnose the issue and tell me what I can do to fix it. If you need any additional info about my setup please ask me.

  Read the article

• Can't access YouTube

  - by Agentleader1

  I can not seem to connect to YouTube at all. If I connect directly to YouTube (youtube.com) I get this: And if I try to connect via video directly (youtube.com/watch?v=), I get this: Here's how this isn't a web issue: I have malware on my computer I believe. And the question here is, how do I get rid of it, or what possible issue could this be? I can verify this is not a website issue or wifi issue, I've tried to connect on another computer in my wifi, and it worked. It is the local machine issue. I've tried to get rid of malware at my best and also have tried to disable possible virus extensions. All can out as the same result: no help. Also, I am unable to find these hiding viruses. I used malware-bytes and Microsoft Security Essentials. Edit: This is OBVIOUSLY Windows. I am currently running on a laptop Windows 7 Home Premium 4gb ram 64-bit os Lifebook series manufactured by Fujitsu America, Inc. Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz nslookup youtube.com:

  Read the article

• RTL8188CE doesn't connect to any wifi access points

  - by Drakmail

  I'm using network manager to connect. Also, tryed iwconfig. Results are same. I even try to connect to open access point — results are same. More information: Drakmail@thinkpad-x220:~$ lspci | grep Network | grep -v Ethernet 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Drakmail@thinkpad-x220:~$ uname -a Linux thinkpad-x220 3.1.0 #1 SMP PREEMPT Wed Oct 26 02:19:49 UTC 2011 x86_64 Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz GenuineIntel GNU/Linux Drakmail@thinkpad-x220:~$ dmesg | tail -n 10 [ 846.901574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 906.812461] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 966.728810] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1026.639676] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1030.925574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin At this moment I try to connect to open wifi ap: [ 1031.252403] wlan0: direct probe to 00:24:8c:55:fa:ed (try 1/3) [ 1031.451943] wlan0: direct probe to 00:24:8c:55:fa:ed (try 2/3) [ 1031.651658] wlan0: direct probe to 00:24:8c:55:fa:ed (try 3/3) [ 1031.851354] wlan0: direct probe to 00:24:8c:55:fa:ed timed out [ 1086.544960] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin My distribution: Drakmail@thinkpad-x220:~$ cat /etc/*version AgiliaLinux release 8.0.0 (Sammy) (Something between Slackware and Archlinux). Also, I saw that wifi module to often trying to load a firmware file. Any ideas what it would be?

  Read the article

• Mysterious swap usage on EC2

  - by rusty

  We're in the middle of a project to move our infrastructure from a co-lo situation into Amazon EC2 and we've noticed some weird memory characteristics of the processes in our setup. Without going into too much detail about the specifics of our processes, we've noticed that on our EC2 instances "top" will show processes using a lot of swap space -- in fact, much greater than the amount of available swap or (if you add it all up) more than the available disk. Here's a sample top output: Mem: 7136868k total, 5272300k used, 1864568k free, 256876k buffers Swap: 1048572k total, 0k used, 1048572k free, 2526504k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ SWAP COMMAND 4121 jboss 20 0 5913m 603m 14m S 0.7 8.7 3:59.90 5.2g java 22730 root 20 0 2394m 4012 1976 S 2.0 0.1 4:20.57 2.3g PassengerHelper 20564 rails 20 0 2539m 220m 9828 S 0.3 3.2 0:23.58 2.3g java 1423 nscd 20 0 877m 1464 972 S 0.0 0.0 0:03.89 876m nscd You can see, for instance, that jboss is reportedly using 5.2 gigs of swap space which is definitely impossible since there's only 1G allocated and none is being used (probably because there's still 1.8G of RAM free). And here's the results of uname -a: Linux xxx.yyy.zzz 2.6.35.14-106.53.amzn1.x86_64 #1 SMP Fri Jan 6 16:20:10 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux We're running an AMI based off of the default Amazon Linux AMI (Amazon Linux AMI release 2011.09, so some RHEL5 and RHEL 6) with not too many customizations and definitely no kernel-level customizations. Something here tells me that on this particular kernel/distribution, the reporting of swap or maybe even total memory usage isn't what it appears to be... Any help would be appreciated!

  Read the article

• Screen randomly goes blue/black/white

  - by FubsyGamer

  Problem Randomly, while using my computer, the monitor goes dark grey/almost black, or it goes white with faint grey vertical lines, or it goes blue with black vertical lines. It's as if the computer powers off. People tell me I sign out of Skype, Spotify stops playing when it happens, etc. When I look at the tower, it doesn't seem like it's off at all. Nothing changes, fans are spinning, lights are on, etc. If you were only looking at the tower, you'd never know there was a problem The only way I can get it to come back up is to push and hold the power button and turn it off, then back on This never happens while I'm playing video games. I've done 5-6 hour sessions of League of Legends, and it doesn't do anything When I'm just browsing the web, reading email, checking Reddit, etc, it happens all the time. It can happen multiple times in a session, it usually takes only about 5 minutes from the time I start browsing to when the computer crashes This started happening after I moved to a new apartment (this has to be relevant somehow, it was not happening where I lived before) There is nothing in the crash logs or event logs System Specs i5 2500k CPU AMD Radeon 6800 GPU Gigabyte z68a-d3h-b3 motherboard WD VelociRaptor 1 TB HDD Screenshots Device manager About screen Things I have tried I was getting a WMI Error in my event logs, but I fixed it using Microsoft's fix, KB 2545227 I was using Windows 8. I wiped the HDD and downgraded to Windows 7 64 bit I took out the video card and used a can of air to totally clean out the video card, all fans, and the inside of the computer in general. I made sure all of the video card pins were fine, then reconnected it I tried to update my motherboard BIOS, but anything I downloaded from Gigabyte was only for 32 bit machines, not 64. I don't even know how to tell what my motherboard BIOS is at right now I am using a power strip, and anything else connected to it works just fine If I re-seat the monitor cable while this is happening, nothing changes Please, help me. I've been battling this for several weeks now, and it's so frustrating it makes me not even want to use the computer.

  Read the article

• file read performance degrades as number of files increases

  - by bfallik-bamboom

  We're observing poor file read IO results that we'd like to better understand. We can use fio to write 100 files with a sustained aggregate throughput of ~700MB/s. When we switch the test to read instead of write, the aggregate throughput is only ~55MB/s. The drop seems related to the number of files since the throughput for read and write are comparable for a single file then diverge proportionally as we increase the number of files. The test server has 24 CPU cores, 48GB of memory, and is running CentOS 6.0. The disk hardware is a RAID 6 array with 12 disks and a Dell H800 controller. This device is partitioned with ext4 using the default settings. Increasing the readahead (using blockdev) improves the read throughput significantly but it still doesn't match write speed. For instance, increasing the readahead from 128KB to 1M improved the read throughput to ~145MB/s. Is this a known performance issue in our OS/disk/filesystem configuration? If so, how can we tell? If not, what tools or tests can we use to further isolate the issue? Thanks.

  Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >