Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 191/750 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

• Unable to PPTP through NAT on Cisco 881

  - by MasterRoot24

  I'm trying to connect to a PPTP server which is sat behind a Cisco 881 NAT router. The server is running Ubuntu Server 12.04 and is running Poptop pptpd as the PPTP daemon listening for connections. As discussed in my other question, I'm trying to setup a Cisco 881 router to replace my old Linksys WAG320N. This same server and WAN connection worked fine with the WAG320N with no special configuration, other than allowing 1723 in through the firewall. On the Cisco 881, I'm using the newer ip nat enable or NAT NVI to setup static routes in through the firewall for the services running behind the router. My reason being that I can't run another copy of my live DNS domains internally with local IP addresses in. For the purposes of this question, though, I have rebuilt the router with ip nat inside/outside style NAT'ing, but this issue is still apparent. HTTP/SMTP/IMAP etc. all work ok from both the WAN and LAN interfaces of the router. I'm only having issues with SIP (see other question) and PPTP. My issue is that the GRE doesn't appear to be passing through NAT correctly and one end of the connection is not receiving GRE traffic when it should be, so the server hangs up the connection. Here's an example of /var/log/syslog with debug enabled in /etc/pptpd.conf: Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: MGR: Launching /usr/sbin/pptpctrl to handle client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pppd options file = /etc/ppp/pptpd-options Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection started Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 1) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a START CTRL CONN RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 156 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 7) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Set parameters to 100000000 maxbps, 64 window size Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a OUT CALL RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Starting call (launching pppd, opening GRE) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pty_fd = 6 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: tty_fd = 7 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 32 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): program binary = /usr/sbin/pppd Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Dec 11 21:06:30 <HOSTNAME> pppd[22627]: pppd 2.4.5 started by root, uid 0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Using interface ppp0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Connect: ppp0 <--> /dev/pts/3 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: GRE: Bad checksum from pppd. Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 15) Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Got a SET LINK INFO packet with standard ACCMs Dec 11 21:07:00 <HOSTNAME> pppd[22627]: LCP: timeout sending Config-Requests Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Connection terminated. Dec 11 21:07:00 <HOSTNAME> avahi-daemon[1042]: Withdrawing workstation service for ppp0. Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Modem hangup Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Exit. Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: GRE: read(fd=6,buffer=6075a0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Reaping child PPP[22627] Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection finished Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Exiting now Dec 11 21:07:00 <HOSTNAME> pptpd[5803]: MGR: Reaped child 22626 As far as Cisco are concerned, all I need is ip nat source static tcp <SERVER LAN IP> 1723 interface FastEthernet4 1723 but of course this doesn't seem to the be helping the GRE traffic through as it should. Trying the connection to the LAN IP of the server from the same LAN as the server (behind the router), the PPTP connection works fine, so I'm confident that the server's config is ok. Furthermore, all I needed on my WAG320N was to open 1723 in the firewall. Here's my current router config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end UPDATE 16/12/2012: The only progress that I have been able to make on this issue is that I'm confident that the issue is caused by the GRE tunnels (which are required for the PPTP connection to complete) are being blocked. When attempting a connection, I can see in show ip nat nvi translations that both a TCP translation on 1723 is setup and also a GRE translation is setup also. I appear to be able to see GRE related packets on the LAN that the server is on, so I am lead to believe that the server is sending(?) GRE packets, however running Wireshark on a client PC when attempting a connection shows absolutely no GRE packets. Whilst there are no configuration directives in my config posted above (that I can pin point) which would specifically block them, it would appear that the GRE packets are not being allowed in/out of the router's firewall, even though a NAT translation entry is setup to the server's LAN address. Would anyone be able to provide me with some help to ensure that GRE packets are not blocked by the router's firewall, so that this can be ruled out as a possible issue please?

  Read the article

• How to get HTTP preseed to work correctly on Ubuntu 10.04 LTS (Lucid)?

  - by netvope

  Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

  Read the article

• Getting Started with GlassFish 4 and OEPE

  - by gstachni

  Oracle Enterprise Pack for Eclipse 12.1.1.2.2 introduces new support for GlassFish 4.0, the reference implementation of Java EE7.  Getting started with GlassFish 4.0 in Eclipse couldn't be easier. Follow these short steps to get GlassFish 4.0 setup so you can start developing, deploying, and debugging your Java EE7 applications. Prerequisites GlassFish 4.0 Oracle Enterprise Pack for Eclipse 12.1.1.2.2+ from OTN or Eclipse Marketplace Setting up the server connection In the Servers view, click to add a New > Server . Select GlassFish 4.0 from the list of supported server configurations. Pick your GlassFish installation directory (usually <glassfish 4>/glassfish) and select your domain. After you click Finish you should now be setup to launch Glassfish 4.0 in normal and debug mode within Eclipse as well as associate projects for deployment through the Add and Remove wizard. Using GlassFish tools in Eclipse GlassFish server tools provide some useful information about your running GlassFish 4.0 environment. Resources displays current resources deployed in the domain including your JDBC Connection Pool and JDBC Resource names. I find this extra bit of information useful when working with JPA. Deployed Applications shows the current active deployments in GlassFish which can be undeployed as needed from within Eclipse. Deployed Web Services provides information about SOAP-based web services deployed in this domain. Also with the running server are quick launch links to open the Administrative Console, Server Logs, and the GlassFish Community Site all within Eclipse's embedded browser.

  Read the article

• Howto boot directly into a VirtualBox image?

  - by mawimawi

  I have a running setup as following: Native OS: Windows 7 64bit, 3 Partitions: c: (System) d: (FAT32, here is my vdi file) e: (unformatted) VirtualBox: Fedora 14 running off the vdi file on drive d. Usually this setup is great for me, but sometimes I'd like to run Linux natively, and not inside VirtualBox. Is there a way to boot directly into the vdi file without the Windows overhead? E.g. using a USB stick with some modified Linux Kernel / GRUB that can mount the vdi file directly as "/"? Or copy the contents of my vdi file to the empty partition and somehow use this from VirtualBox (when booting into Windows) AND directly booting into Linux? Hope to get some hints or even howtos.

  Read the article

• Howto boot directly into a VirtualBox image?

  - by mawimawi

  I have a running setup as following: Native OS: Windows 7 64bit, 3 Partitions: c: (System) d: (FAT32, here is my vdi file) e: (unformatted) VirtualBox: Fedora 14 running off the vdi file on drive d. Usually this setup is great for me, but sometimes I'd like to run Linux natively, and not inside VirtualBox. Is there a way to boot directly into the vdi file without the Windows overhead? E.g. using a USB stick with some modified Linux Kernel / GRUB that can mount the vdi file directly as "/"? Or copy the contents of my vdi file to the empty partition and somehow use this from VirtualBox (when booting into Windows) AND directly booting into Linux? Hope to get some hints or even howtos. EDIT: yes, sorry. not programming related. I posted the question to serverfault.com (hopefully that's the better site for my question.)

  Read the article

• Two Routers, Two Internet (1 Open, 1 PPTP) - Routing?

  - by SomeUser

  Hi there, I'm trying to setup two routers - one to route specific sites to a always-on PPTP VPN connection, the other for open internet access w/ firewall. First router is connected to Internet w/ built-in firewall. Second router is connected to a PPTP VPN connection. I was going to connect a wire between the routers and would like some insight on how to get both groups of systems (connected to each router) to talk between automatically. Even better would be to setup one gateway for certain sites and another for general Internet. The other option is to default all sites to the net and shoot others to the gateway or vice versa... Any insight so I can get a better grasp of this? Thanks!

  Read the article

• SSH Tunnel for Remote Desktop via Intermediary Server

  - by Mihai Todor

  I've seen many examples of SSH tunnels on the nets, but I'm still having no luck with this. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall, with PowerShellInsider SSH server set up and working fine. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, from which I wish to do remote desktop on the PC. Now, here's what I've tried so far: SSH tunnel from my laptop to the Linux server: ssh -f my_user@LINUX_SERVER -L 6666:LINUX_SERVER_IP:6666 -N SSH to the Linux server where I've set up a tunnel to the PC: ssh -f 'PRIVATE_DOMAIN\my_user'@PC_NAME -L 6666:PC_IP:3389 -N Unfortunately, I must be doing something wrong, because it doesn't seem to work. Any ideas why or, at least, any suggestions on how can I try to debug this setup? At the moment, I have access to all 3 machines (non-root on Linux), so I can test whatever I want...

  Read the article

• SSH access from outside to a pc inside network

  - by Raja

  I have a static IP and ADSL router linked to a linksys wireless router to which all my machines are connected. I would want to setup SVN on one of machines and provide SSH access which should be accessible by users outside my network. Would this be possible? Even just SVN access through web should be fine. Please let me know what all things should be done to achieve this ? I have Ubuntu VM running in a iMac Leopard machine and another 2 Win 7 32/64 bit machines. I can setup standalone Ubuntu or Win XP on another machine. Thanks, Raja.

  Read the article

• Apache NameVirtualHost on port 443 ignores ServerAlias

  - by Ryan

  I've got a name-based virtual host setup on port 443 such that requests on host 'apple.fruitdomain' are proxied to the apple-app and requests on host 'orange.fruitdomain' are proxied to orange-app. This is working, but I'd like to add a ServerAlias for each such that requests on host 'apple' are proxied to apple-app and requests on host 'orange' are proxied to the orange-app. If I simply add a ServerAlias directive to the virtual host it doesn't work. ssl.conf below: Listen 443 NameVirtualHost *:443 <VirtualHost *:443> ServerName apple.fruitdomain ServerAlias apple SSLProxyEngine on ProxyPass /apple-app https://localhost:8181/apple-app ProxyPassReverse /apple-app https://localhost:8181/apple-app ... </VirtualHost> <VirtualHost *:443> ServerName orange.fruitdomain ServerAlias orange SSLProxyEngine on ProxyPass /orange-app https://localhost:8181/orange-app ProxyPassReverse /orange-app https://localhost:8181/orange-app ... </VirtualHost> Interestingly if I do a similar setup but with port 80 then the ServerAlias works...

  Read the article

• What partition to use to keep data files in Ubuntu?

  - by Martin Lee

  I have been using Ubuntu for a few years and usually my partition set up was the following: Ext3 or Ext4 partition for the system itself (20 GB); A 10 GB swap partition; a big FAT32 partition to store movies, photos, work stuff, etc. (depends on the capacity of the disk, but usually it is what is left from Ext3+Swap, currently it is more than 200 GB). Does this setup sound right? I am considering to switching to one big Ext3 partition now, because the problem with Fat32 in Ubuntu has not gone anywhere: for example, right now I can access my 'big' partition with a 'Data' label only through /media/_themes?END. Pretty strange name for a partition, isn't it? some Linux software fail to read/write on this partition. For example, if I want to play around with rebar and build/make/compile things on this FAT32 partition, it will always complain about permissions and won't work (the same goes for many other kinds of software); it is not stable, I can not refer to some files on this FAT32 partition, because after the next reboot it will be called not '_themes?END', but something else. On the other side I usually begin to run out of space on the Ext3 partition after a few months of usage. So, the question is - what is the best setup of partitions for an Ubuntu system? Should a FAT32 partition be used at all?

  Read the article

• How to set RpcClientAccessServer for a Exchange 2010 mailbox database to a load balancer

  - by Archit Baweja

  I have 2 Exchange 2010 servers each with a Mailbox Database. I have also setup a Hardware Load Balancer (KEMP LoadMaster 2200 to be precise) to load balance the CAS role access. My HLB has an IP of 192.168.1.100. I've setup the DNS A record for mail.mydomain.com to point to 192.168.1.100. However when I try to set the RpcClientAccessServer on a mailbox database using Set-MailboxDatabase "My Mailbox Database" -RpcClientAccessServer mail.mydomain.com I get an error saying Exchange server "mail.mydomain.com" was not found. Please make sure you have typed it correctly. + CategoryInfo : NotSpecified: (:) [], ManagementObjectNotFoundException + FullyQualifiedErrorId : 4082394C Any ideas?

  Read the article

• How to automatically show USB camera or memory stick contents in Icewm?

  - by darenw

  I normally use a very lightweight Linux setup. No desktop like Gnome or KDE, just Icewm as the windows manager and nothing else that normal users might consider essential. Well, I do need a file manager - I use Thunar. Recently I've been trying Gnome. Whenever I shove a memory stick into a USB port, or connect my digital camera, it can automatically pop up a file manager showing all the goodies on that device. KDE does this too. I like this. Although quick at the command line, I like not having to go sudo to mount the device and all that. If I want to stick with a lightweight setup using Icewm+Thunar, is there something non-huge I can install to make external devices fire up a Thunar window, or otherwise make access to the contents brainlessly easy?

  Read the article

• StreamInsight Now Available Through Microsoft Update

  - by Roman Schindlauer

  We are pleased to announce that StreamInsight v1.1 is now available for automatic download and install via Microsoft Update globally. In order to enable agile deployment of StreamInsight solutions, you have asked of us a steady cadence of releases with incremental, but highly impactful features and product improvements. Following our StreamInsight 1.0 launch in Spring 2010, we offered StreamInsight 1.1 in Fall 2010 with implicit compatibility and an upgraded setup to support side by side installs. With this setup, your applications will automatically point to the latest runtime, but you still have the choice to point your application back to a 1.0 runtime if you choose to do so. As the next step, in order to enable timely delivery of our releases to you, we are pleased to announce the support for automatic download and install of StreamInsight 1.1 release via Microsoft Update starting this week. If you have a computer: that is subscribed to Microsoft Update (different from Windows Update) has StreamInsight 1.0 installed, and does not yet have StreamInsight 1.1 installed, Microsoft Update will automatically download and install the corresponding StreamInsight 1.1 update side by side with your existing StreamInsight 1.0 installation – across all supported 32-bit and 64-bit Windows operating systems, across 11 supported languages, and across StreamInsight client and server SKUs. This is also supported in WSUS environments, if all your updates are managed from a corporate server (please talk to the WSUS administrator in your enterprise). As an example, if you have SI Client 1.0 DEU and SI Server 1.0 ENU installed on the same computer, Microsoft Update will selectively download and side-by-side install just the SI Client 1.1 DEU and SI Server 1.1 ENU releases. Going forward, Microsoft Update will be our preferred mode of delivery – in addition to support for our download sites, and media based distribution where appropriate. Regards, The StreamInsight Team

  Read the article

• How to get httpd to forward to multiple tomcats for different urls, including / ?

  - by Nick Foote

  Ok So I've got multiple tomcat instances setup on several AJP ports, I also have Apache httpd listening on port 8090 (cos I've got another app already using 8080 at the moment). I've successfully mapped urls such as mydomain.com:8090/demo and mydomain.com:8090/preprod to their respective tomcat instances using Jk Mount and the following vhosts config; <VirtualHost *:8090> JkMount /preprod* preprod JkMount /demo* demo </VirtualHost> But I also want the "root" address to map to another tomcat instance, what will become live/production, ie I want mydomain.com:8090/ to map a 3rd tomcat instance. At the moment nothing happens or changes if I just add to the above config a line; JkMount /* rootwar if I browse to mydomain.com:8090 I just get the same boring apache httpd landing page letting me know its running (ie index.html in httpd/htdocs) Is it possible to use JkMount to redirect the "root" address stuff to a tomcat instance? I can see that a rule like /* will also match URLs like mydomain.com/preprod but I was hoping the rules are applied in order so if /* appears at the end it effectively would be a "if its not one of the other environments, then direct to root/production" Just to be clear I'm trying to setup the following; mydomain.com:8090/preprod --> myApp running in tomcat1 mydomain.com:8090/demo --> myApp running in tomcat2 mydomain.com:8090 --> myApp running in tomcat3

  Read the article

• Smart subdomain routing via reverse proxy

  - by Trevor Hartman

  I have two servers on my home network: OSX Server and an Ubuntu Server. I'd love to have external subdomains osx.mydomain.com point to osx and ubuntu.mydomain.com point to ubuntu. I know the normal way to do this is to have a static external IP address for each, but that's not an option as this is just my home setup. My question is: is there a way to do this with some reverse proxy trickery? OSX is currently the default entry point for all traffic. I was able to setup a reverse proxy on OSX for ubuntu.mydomain.com on port 80, so web traffic was correctly being proxied to my ubuntu. I'd like to ssh and do a bunch of other stuff though!

  Read the article

• self-signed certificate for iis 6.0

  - by denise

  how do i setup a self-signed certificate for multiple websites?

  Read the article

• Setting DNS suffix for multiple network adapters in a VM

  - by arun_bh

  Is there a way to set the DNS Suffix for multiple network adapters in a VM using the sysprep file? We are trying to setup Windows 2003 VMs with 2 network adapters. In the one adapter case the sysprep we are able to set the suffix using DNSDomain. But this doesnt work in the 2 adapter case. The The VM is setup corrently though without any issues but one of our apps relies on the DNS Suffix value to work correctly. Thanks in advance.

  Read the article

• How do I troubleshoot an IPsec tunnel (from a cellular router to a public server)?

  - by Hanno Fietz

  I'm new to IPsec and struggling with a setup that might soon be widely used in our operations (provided I do understand it, eventually...). A cellular router (blackbox by netModule, from its log messages it seems to be running Linux and OpenSwan) connects a sensor network on customers' sites with our public server. We need to be able to connect into the local network, so I had the cell provider give me a public IP (a dynamic one). The way their setup works, the public IPs only allow IPsec traffic. I set up OpenSwan on our Ubuntu server (running Jaunty). This is my connection config from /etc/ipsec.conf: conn gprs-field-devices left=my.pub.lic.ip [email protected] #leftsubnet=192.168.1.129/25 right=%any [email protected] #rightsubnet=192.168.1.1/25 #rightnexthop=%defaultroute auto=add On the router, all I have is the Web UI, in which I made the following settings: "Remote endpoint": public IP of server, same as "left" above "Local Network Address": 192.168.1.1 "Local Network Mask": 255.255.255.128 "Remote Network Address": 192.168.1.129 "Remote Network Mask": 255.255.255.128 The pluto process on the server is listening for connections on port 500. It can't open a tunnel, obviously, because it doesn't know at which IP the client is. I set up a passphrase as PSK for @field.econemon.com in /etc/ipsec.secrets and also configured it in the router (which doesn't seem to support certificates). My problem is, nothing happens. The router just says, IPsec is "down". When I copy-paste the IP into ipsec.conf (for "right="), and ask the server to ipsec auto --up gprs-field-devices, it just hangs until I press Ctrl-C. Is there anything wrong with my setup? How can I debug this further? My router gives the following loglines that seem related, but don't tell me anything: Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/hostkey.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/netbox0.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: "netbox00" #1: initiating Main Mode Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: 104 "netbox00" #1: STATE_MAIN_I1: initiate Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: ...could not start conn "netbox00" Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: received and ignored informational message Feb 21 23:08:28 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 0 seconds Feb 21 23:08:40 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 10 seconds Feb 21 23:08:52 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN

  Read the article

• Can't change settings for Mobile Broadband Dongle - Button is greyed out

  - by Ross LIndsey

  I was with VirginBroadband.com.au (Australia). My huawai 3G Dongle was working great on Ubuntu, However I have changed ISP's. I unlocked the modem, and put in the new SIM. I have tested this in my Windows PC and it connects to the new (Optus) Network A-OK and it all works. When I put this dongle (the same one that was working fine in Ubuntu) into that same Ubuntu Netbook it simply won't connect. When I try to go into the dialog to try and add or change settings the button to change or update settings is greyed out, I can't select it. Apparently since this dongle was already recognized the Broadband Setup Wizard won't start, and I have no idea how to get it to start (presuming it has the ability to configure an already recognized dongle). What do I have to do to either enable the ability to change the configuration for this setup, or to blow away the one that is set up so the Broadband Wizard will re-start and let me configure a new one. Can anyone provide simple instructions for doing this? I'm using Ubuntu with the Cinnamon Desktop

  Read the article

• How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

  - by aireq

  I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in?

  Read the article

• MySQL Daemon failed to start

  - by T. Brian Jones

  THE SETUP I'm running Linux CentOS on an Amazon EC2 instance. The MySQL data files are on an EBS Drive mounted at /data/ ( symlink - /var/lib/mysql /data/mysql ). Everything works fine in this setup. THE PROBLEM I'm trying to move everything from this EBS drive to a new drive. I umounted the /data/ drive, and mounted it at /data2/. Then I mounted the new drive at /data/ and copied everything over to it from /data2/. Everything on the system works great, except MySQL. Every time I try to start the MySQL daemon ( /etc/init.d/mysqld start ) I get a MySQL Daemon failed to start error.

  Read the article

• Create and use intermediate certificate authority on Windows Server 2012?

  - by Sid

  Background: Server OS is Windows Server 2012. GUI is installed as we come upto speed with powershell. Setup is staging, not production (yet). We have our (internal, domain limited) Root CA installed. I would like to take the Root CA offline to secure storage but before that I'd like to setup an intermediate CA which can take over actual live, online (int-RA-net) functionality Can someone guide me covering: creating the intermediate CA certificate request installing the intermediate CA certificate on domain controller (certification authority role already installed with Root CA online right now) use the intermediate CA to generate a certificate (any use certificate, just for demonstration purposes) Obviously this certification chain would be invalid on computers outside our domain (self trusted root - our root certificate is NOT from common 3rd parties). This last point is NOT a problem.

  Read the article

• Can you add doubleclick macros to exisiting ads

  - by picus

  Setup: A few weeks back I made some very simple html5 "ads" to run on a few of our partner sites. They weren't paid ads as we also manage these sites, however there are a few of them, so I made a modular solution that is hosted on one of our web servers and included on each page via javascript which outputs an iframe. Each search (ad has a search box) or click appends a url param that we track using custom vars in Google Analytics. In essence, the ad is a HTML page served in an iframe via javscript. Problem: We have an opportunity to run these ads on a third party site, I had sent them a brief how-to for inserting them and they came back saying that: The creative code doesn't contain the %u macro. We can’t substitute the default click-through URL without it. I am somewhat familiar with doubleclick from a web developer's POV, i have inserted DC dart tags before and even have implemented the ad tool for publishers. I have not, however, actually ever created an ad for the doubleclick network before. I assume the publisher needs these tags to track clicks and hence charge us. However, they have not responded to me in regards to these questions. Are macros something I can just add to or replace the existing links with, or do I need to completely setup the ad with doubleclcik - a big issue in the short term given we do not have a advertiser's account set up with them. Thanks in advance

  Read the article

• SHH Tunnel for Remote Desktop via Intermediary Server

  - by Mihai Todor

  I've seen many examples of SSH tunnels on the nets, but I'm still having no luck with this. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall, with PowerShellInsider SSH server set up and working fine. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, from which I wish to do remote desktop on the PC. Now, here's what I've tried so far: SSH tunnel from my laptop to the Linux server: ssh -f my_user@LINUX_SERVER -L 6666:LINUX_SERVER_IP:6666 -N SSH to the Linux server where I've set up a tunnel to the PC: ssh -f 'PRIVATE_DOMAIN\my_user'@PC_NAME -L 6666:PC_IP:3389 -N Unfortunately, I must be doing something wrong, because it doesn't seem to work. Any ideas why or, at least, any suggestions on how can I try to debug this setup? At the moment, I have access to all 3 machines (non-root on Linux), so I can test whatever I want...

  Read the article

• Google Apps For Business, SSO, AD FS 2.0 and AD

  - by Dominique dutra

  We are a small company with 22 people in the office. We had a lot of problems with e-mail in the past so I decided to change over to Google Apps for Business. It is the perfect solution for us, except for one thing: I need to be able to control the access to the mailboxes. Only users inside the office, authenticated to AD, or users authenticated to our VPN can connect to gmail. From what I've read it is possible using the SSO (Single Sign On) solution provided by Google - but i am having some trouble finding consistent information about it. First of all, our infrastructure: Windows Server 2008 R2 Active Directory, one domain only. Kerio Control for QoS and VPN. That's about it on our side. On Google Apps' side, I have one account, and 03 domains that my users use to log in. The main domain has most of the users, but the are a couple of people that login using one of the subdomains. I have a 03 domains because I run mail for 03 companies and wanted all to be in within the same control panel. Well, I found some guides on the internet but none of them cover the AD FS installation part. I've read somewhere that I needed to download AD FS 2.0 directly from Microsoft.com, because the one that came with Windows Server was a old version. I downloaded it (adfsSetup.exe) and tried to install but got an error, saying that I needed a Windows Server 2008 Sp2 for that program. My Windows Server 2008 is R2. I really need some help here, this is very importand, I dont want to have to pay $1000 for a SSO solution when i have an AD set up. Can someone please point me out to the right direction? Where can I find an AD FS 2.0 setup compatible with R2 would be a good start, or the one that came with r2 is already the 2.0 version. After the initial setup, there are some guides on the internet about the Google Apps part. It seems to be really easy. I also tried adding AD FS role, but there are a bunch of options wich I have no idea what means, and I coudn't find any guide covering that on the internet. I dont have a lot of experience with Windows Server, but I have a company wich is certificated and provide us with support. I can ask for their help in the later setup, but I dont think ADFS is a very common thing to deal with.

  Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >