Search Results

Search found 102826 results on 4114 pages for 'question about the problem'.

Page 192/4114 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

• X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

  - by Marcelo Santos

  After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

  Read the article

• Windows XP Problem

  - by LoRdiE

  I'm facing error on Windows XP Start, KEYBOARD not work and can't choose Start windows normally. After wait 30 seconds, windows not start. I'm test with Windows Live CD and keyboard work well. How can i fix?

  Read the article

• Problem opening XWindows programs with xming and SSH Secure Shell

  - by Brian

  I've installed SSH Secure Shell and xming on my laptop running Windows 7 (64-bit). I'm having trouble starting X Windows applications from the SSH console. I've been able to do it in the past. I've pretty much determined that it's not a server issue because I've tried it on two different servers (both servers are running RHEL 5). Running "echo $DISPLAY" on either server gave me "localhost:10.0". My XLaunch configuration settings are: Multiple Windows, 10 (display number), and Start no client. Once xming has launched, I'll try to execute something like "firefox" and I get this back: The application 'firefox' lost its connection to the display localhost:10.0; most likely the X server was shut down or you killed/destroyed the application. I've already checked to make sure that the X server is running and it is: root 12579 2689 0 Feb14 tty7 00:04:23 /usr/bin/Xorg :0 -br -audit 0 -auth /var/gdm/:0.Xauth -nolisten tcp vt7 Additionally, X11 Tunneling has been enabled in SSH as well as SSH 2 connections.

  Read the article

• problem using scp

  - by Tim

  I issued an command on a local machine scp -r download/ [email protected] Then I checked at the remote foo.xxx.xxx.xxx and found under my home directory, there is nothing. Did scp transfer something? If yes, where are they? Thanks!

  Read the article

• Mysql charset problem

  - by Newtonx

  I'm trying to import some data from one server to another. But when I do it, I'm having problems with charset. Words like Goiânia became Goiâni and conceição became conceição My Application was set to use latin1 charset Server 1 : MySQL Charset : UTF-8 Unicode (utf8) table collation : latin1_swedish_ci Server 2 : MySQL Charset: UTF-8 Unicode (utf8) table collation : latin1_swedish_ci Command I used to export data from server 1 mysqldump -u root -p --default-character-set=iso-8859-1 database_name db.sql Command used to restore to server 2 mysql -u root -p database_name < db.sql

  Read the article

• magic mouse problem

  - by Grace

  I just bought a magic mouse and connected it to my mac computer. The only things that are working are the right and left click. It is not even bringing up that scrolling thing in system preferences. Does anyone know what could be wrong?

  Read the article

• Virtual PC and hardware-assisted virtualization (VT-x) problem

  - by Vesa Huovi

  I've installed Microsoft's Virtual PC on Windows 7, but when I try to start a virtual machine I get the following error message: '<Virtual machine name' could not be started because hardware-assisted virtualization is disabled. Please enable hardware virtualization in the BIOS settings and try again. If hardware virtualization settings is already enabled, you may have to disable Trusted Execution Technology (TXT) setting in BIOS or update the system BIOS. However, if I download and run the Hardware-Assisted Virtualization Detection Tool, it gives the following positive message: This computer is configured with hardware-assisted virtualization. This computer meets the processor requirements to run Windows Virtual PC. If this computer runs a supported edition of Windows® 7, you can install Windows Virtual PC. I've also used the MSR Walker in the third-party utility CrystalCPUID to examine MSR 0x3a on both processors on my system, and it's 0x5 (0x4 = VT enabled, 0x1 = VT lock), as expected. Does anyone have any ideas of what else to check? Thanks.

  Read the article

• Problem with glaux.h locating

  - by Rodnower

  Hello, I try to compile code, that beggins with: #include<stdlib.h> #include<GL/gl.h> #include<glaux.h> with command: cc -o test test.c -I/usr/local/include -L/usr/local/lib -lMesaaux -lMesatk -lMesaGL -lXext -lX11 -lm But one of errors I got is: test.c:3:18: error: glaux.h: No such file or directory Then I try: yum provides glaux.h but yum find anything. Before all I installed Mesa with: yum install mesa* So, can anyone tell me from where I can get the header file? Thank you for ahead.

  Read the article

• Problem with installing sqlite3 module for python 2.6 on an ubuntu system

  - by Hoang

  I need to run the sqlite3 module on python 2.6 in an ubuntu system. How do I install this module for Python 2.6? Somehow I don't have this module, it raises the error: >>> import sqlite3 Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/local/lib/python2.6/sqlite3/__init__.py", line 24, in <module> from dbapi2 import * File "/usr/local/lib/python2.6/sqlite3/dbapi2.py", line 27, in <module> from _sqlite3 import * ImportError: No module named _sqlite3

  Read the article

• dynamic subdomains problem?

  - by Solomon Saleh

  im trying to add a wildcard subdomain system to my webserver, but its still not working, this is the steps i took: i made a new file vhost.conf in the directory var/www/vhosts/www.kornar.com/conf/vhost.conf and i put ServerAlias *.domain.com then second of all i made a new dns wildcard on plesk CNAME *.domain.com kornar.com and then i edited my .htaccess file Options +FollowSymLinks RewriteEngine on RewriteCond %{HTTP_HOST} ^(^.*)\.kornar.com RewriteRule (.*) user.php?user=%1 normally my url would be http://www.kornar.com/user.php?user=solomon but now i want to like this http://solomon.kornar.com but the steps i took still deosnt work :)) whats happening here

  Read the article

• route view problem

  - by Clear.Cache

  Trying to check IP status to show a customer root@server [~]# telnet route-views.routeviews.org Trying 128.223.51.103... Nothing happens, but telnet is enabled Any idea why it may hang for minutes? Using CSf firewall, Centos 4.4 box

  Read the article

• vDS - vCenter Problem

  - by rbmadison

  We are implementing a vSphere farm and are using a distrubuted switch. The VC is a VM within the farm connected to the distrubuted switch. We had a SAN issue and all of our VMs were down. When the SAN recovered and we restarted the ESX host containing the VC the VC couldn't connect to the network through the vDS. We had to remove a NIC from the vDS on that host and create a regular vswitch and then connect the VC to that before the VC would connect to the network. Is this typical behavior? If the VC goes down does all vDS networking stop on all the hosts? That seems to be a very bad thing. I thought networking would work even though the VC is down because the hosts have the vDS configuration cached. Is there a better way to configure it to prevent this from happening. We want to keep the VC as a VM for HA and recoverabilty purposes. Can anyone offer suggestions or explanations? I appreciate the help. Thanks, Rick

  Read the article

• Problem with my unicorn

  - by Johnny W

  I'd love to get some help with my unicorn, the damned thing just won't respond to my commands. It's a standard white unicorn with with a white mane. I've tried giving it hay, carrots and sugar cubes, but it's still refusing to do what I ask. I've read on other sites that I may need to reshoe her, but I'd rather not if I don't have to. Thanks for any help.

  Read the article

• Solr Multicore Admin Problem

  - by Daniel M

  Im trying to add a url based security constraint to solr deployed in websphere 6.1. If I specify the core name in the url of the constraint then the admin url for that core gives a 404. Has anyone had any success with this or any suggestions? Cheers Cross-posted with stackoverflow

  Read the article

• SQL Server Backup problem when browsing to the directory

  - by Richard West

  I want to allow a group (eg. 'BackupManagers') who can only preform backup and restore operations on certain databases. When creating the BackupManagers user account I checked db_backupoperator. When the user logs in to create a backup they get an error message similar to the following when the select Tasks - Backup - Click on Add in the destiantion block - click on the "..." button to browse TITLE: Locate Database Files - MYSERVER\SQL2005 E:\MSSQL\Backup Cannot access the specified path or file on the server. Verify that you have the necessary security privileges and that the path or file exists. If you know that the service account can access a specific file, type in the full path for the file in the File Name control in the Locate dialog box. I have confirmed that the user has permissions to the folder. I have even created a share to this folder and had them access it through explorer. They are able to create and delete files within the folder. I have found that if they type in the path to the file instead of using the "..." button to browse the directory tree then they can create a backup file fine. Why is the browse button not working as expected? Thanks!

  Read the article

• COPSSH RSA only authentication connection problem

  - by Siriss

  Hello all- I am trying to setup an RSA Authentication only SSH/SFTP server. The SSH will be used primarily for RDC. Everything works just fine if I use password authentication. I am using Putty Key Generator to create he keys and I have pasted the key into authorized_keys file and restarted the OpenSSH server. I am using FileZilla to test the SFTP connection as that is the most important. For my tests I have created the keys without password correction. It will not work with a standard SSH connection either. It says "Server refused our key". I have recreated the key twice double checking with a guide on google, and I am pretty sure I did it correctly. I load the key file into FileZilla under settings/SFTP and try to connect and I get the following error: Disconnected: No supported authentication methods available. I have been playing with the different settings all night and I cannot figure it out. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m PermitRootLogin no #StrictModes yes #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM no #AllowAgentForwarding yes #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /bin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs # X11Forwarding no # AllowTcpForwarding no # ForceCommand cvs server Thank you so much for your help!

  Read the article

• filesystem mounting problem

  - by user306988

  Hello, A DAS box is attached to my linux box using LSI SCSI HBA. Volume is properly detected on the linux box and filesystem is created using mkfs.ext2 /dev/sdc #No partition table I can not mount the volume using mount/dev/sdc /mnt/temp -t ext3 But I can mount it using mount /dev/sdc /mnt/temp -t ext3 -o loop Can anybody please tell me what "-o loop" option does internally? Has anybody faced this option before? Thanks in advance, prashant

  Read the article

• Strange Upload Problem on Hyper-V

  - by Ring0

  Hi, This one is driving me totally nuts. I have being trying to upload a file to www.virustotal.com (its a harmless exe I have since found out - DiskWipe.exe from diskwipe.org). Using IE8. From Win 7 and Win 2008 R2 Datacenter (which I select to boot from vhd's) onto my main machine hardware, and also on another Win 7 PC elsewhere on my network, when I upload the file to virustotal.com it works perfectly. So, using my native NIC's everything is fine. Using another machine also perfect. Right. OK, from my boot menu the default is my main development machine - the one I'm typing on now. This runs on the metal and has Hyper-V role and I have some guests. All guests are not running. Amazingly, from my console (root partition to be exact) or any guest OS 2003 /XP / 2008 R2 etc. My upload to virustotal.com slows at 32% then HANGS at 38.something% & never finishes!! Here is the kicker. I have another box (my main server) running Hyper-V on the metal and three live guests. Identical H/W to my main dev machine in another room. (Except OS is Datacenter - Mine is Enterprise). If I try and upload from its bare metal console or any guest this file to virustotal.com using IE8 it stops exactly in the same place!! As for "steps I have tried etc." are kind-of blown out of the water as my server box is doing the precise same thing as the machine in my room here. OK, comonalities: Mobo: Gigabyte GA-X58-UD5, 12GB Kingston RAM, Corei7 920 4 cores hyperthreading = 8 & Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC's. All 3 machines have this same motherboard - revision F11 Bios, all have 12GB RAM, all have the Realtek Nic's. All x64 by the way as I mentioned before I have a Win 7 box also with the UD5 m/Board, 12 GB RAM - bit of an overkill. :-) All these machines when NOT running Hyper-V can upload this file. Perhaps you may like to try it on a Hyepr-v (2008 R2) yourselves with IE8 and the desktop experience is on. See if it works or fails for you. Root OS or any guest. So, looking like its the NIC + Hyper-V = Cannot upload this file (any file I must add.) Realtek Nic is Ver 7.002.1125.2008. Using IE8 I see in the nic settings there are the usual parameters for Jumbo frames / Checksum offloading etc. several others. Should I fiddle with these? I ran Netmon 3.3 in a guest and the TCP session halted as the upload failed. I suppose I could study that further. I dont have Netmon on the root partition machine (yet)! All OS's fully patched - including todays defender files. My box running Office 2007 - but identical server in another room is not. Also, if I fire up a VPN to a distant client and do the upload it works! Of course its a different network path. Suggestions welcome please. If I left out anything important - please yell at me. Many Thanks,

  Read the article

• Problem in installing & configuring bugzilla

  - by VIVEK

  Can somebody help me in installing bugzilla (list out exact steps if possible) on Windows Server 2008 with IIS 7.0 , Mysql 5.1 & existing email server(already configured)? I followed installation steps from many posts & also your site , everything goes right but when I start to creating accounts by sending email in bugzilla web panel, I get error:- “There was an error sending mail from 'bugzilla-daemon@' to '[email protected]':Can't call method "address" on an undefined value at C:/Program Files (x86)/Bugzilla/perl/perl/site/lib/Email/Send/SMTP.pm line 25.” I also tried installing through Windows installer, but same issues. Please any help would be appreciated. Expecting quick response.

  Read the article

• Windows 7 Networking Problem

  - by bstorrie

  Hello, I'm on a Windows 7 Computer with an additional Win7 computer and an XP computer and I keep getting an error: 0x8007046a: "Not enough server storage is available to process this command" when I try to connect to a share on the Windows XP Computer. The Windows 7 Computers talk fine as far as HomeGroup, etc, but no dice with XP shares. Additionally this is in a workgroup. I have searched countless forums including TechNet, tried IRPStackSize, DhcpNodeType, and Uninstalling/Reinstalling File and Printer Sharing for M$ Networks. Any help is much appreciated.

  Read the article

• display problem in fedora 9

  - by Neha

  When I run system-config-display i get a fatal IO error 11 (Resource Temporarly Unavailable on display 17.0'

  Read the article

• Curious problem using VirtualDub

  - by RCIX

  I have a simple video which i've cropped and trimmed down in VirtualDub. I've then re-saved it as AVI; however the video now plays very slowly/cchoppily in Windows Media Player. Is there any particular reason for this?

  Read the article

• Problem hosting server behing personal router

  - by Venkatesh Hodavdekar

  I recently bought the domain name lucidcontraptions.com and want to host the website from home. I have a D-Link router in which I have set up my personal virtual server correctly. My application server is Apache 2.2. The server works perfectly with the following settings: External IP: 207.172.xx.xx. Public port: 8888 Internal IP: 192.168.xx.xx. Private port: 80 If I go to 207.172.xx.xx:8888/ the server works perfectly and my Apache page shows up without any issues, both from inside the intranet as well as outside. This setting would not work out for me as I am not allowed port numbers in my DNS management. Now when I tweak the settings to the following: External IP: 207.172.xx.xx. Public port: 80 Internal IP: 192.168.xx.xx. Private port: 80 If I go to 207.172.xx.xx/ the server works perfectly and my Apache page shows up without any issues, BUT ONLY FROM INSIDE THE INTRANET. This page does not show up for people outside the intranet.

  Read the article

• Ubuntu box static routing problem

  - by Rafael

  Hello, I'm trying to configure a ubuntu server to be a router. This is my interface configuration (eth2 connects to my WAN, eth0 to my LAN): auto eth2 iface eth2 inet static address 192.168.0.249 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 auto eth0 iface eth0 inet static address 192.168.100.1 netmask 255.255.255.0 This is the router information: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth2 And this is dhcp configuration: subnet 192.168.100.0 netmask 255.255.255.0 { range 192.168.100.101 192.168.100.254; option domain-name-servers 201.70.86.133; option routers 192.168.100.1; authoritative; } I'm then connecting a mac os x by cable on eth0. This is en0 interface configuration: en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:26:bb:5d:82:b0 inet6 fe80::226:bbff:fe5d:82b0%en0 prefixlen 64 scopeid 0x4 inet 192.168.100.101 netmask 0xffffff00 broadcast 192.168.100.255 media: autoselect (100baseTX <full-duplex>) status: active And this is the routing table: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.100.1 UGSc 139 32 en0 10.37.129/24 link#8 UC 2 0 vnic1 10.37.129.2 0:1c:42:0:0:9 UHLWI 0 839 lo0 10.37.129.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic1 10.211.55/24 link#7 UC 2 0 vnic0 10.211.55.2 0:1c:42:0:0:8 UHLWI 0 840 lo0 10.211.55.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic0 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 3 507924 lo0 169.254 link#4 UCS 0 0 en0 172.16.42/24 link#10 UC 2 0 vmnet8 172.16.42.1 0:50:56:c0:0:8 UHLWI 0 839 lo0 172.16.42.255 link#10 UHLWbI 1 24 vmnet8 192.168.100 link#4 UC 2 0 en0 192.168.100.1 0:e0:7c:7e:f:99 UHLWI 139 0 en0 777 192.168.100.101 127.0.0.1 UHS 0 0 lo0 192.168.100.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 en0 192.168.116 link#9 UC 2 0 vmnet1 192.168.116.1 0:50:56:c0:0:1 UHLWI 0 839 lo0 192.168.116.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vmnet1 When I ping 192.168.100.1, it works. When I ping 192.168.0.249, it also works. However, when I try to ping 192.168.0.1 it does not. Does anyone has any way to solve this? Is there a way to debug it? Thanks,

  Read the article

• Password problem while creating domain

  - by Murdock

  Hi, I'm freshman so far in server management stuff but this seems to be clearly against logic. After updating my Windows Server 2008 Standard 32bit, installing DNS server and AD DS I wanted to create domain via using CMD and dcpromo.exe setup. But no matter if I disable demand for comlex password in Password policies or create a password which fully comply with requirements for strong and complex password, still I can't get any further and it says that my password doesn't meet requirements. I'm also asked there to activate password demand by NET USER -passwordreq:yes and when I do so, this password doesn't work any more and I have to remove it from other admin account to be at least able to login with proper Administrator account.

  Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >