Search Results

Search found 5670 results on 227 pages for 'zend router'.

Page 192/227 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

• Improving sound quality with remote ESD server

  - by cuu508

  Hi, I'm investigating low-budget ways to get audio from my PC (Ubuntu) to HiFi without wires. I'm currently testing a setup where Asus WL-500gP wireless router runs ESD daemon and has attached USB soundcard which is then plugged into HiFi. I'm testing playback on PC with mpg123-esd and Spotify under Wine. The sound is there, latency is unexpectedly low, but I also hear occassional clicks and some distortion from time to time. I suppose that's because of the low latency and wireless streaming of uncompressed audio--any packet drops, CPU temporarily being busy etc. will cause clicks in sound output. Is there a way around this problem, increasing latency / buffer size somehow perhaps? Streaming using shoutcast protocol seems to be a way out but I have feeling that would be a complex and brittle setup.

  Read the article

• Openvpn client-to-client connection reencrypted at Server?

  - by user1684411

  currently i'm using a site-2-site openvpn setup. The routers en/decrypt all traffic that goes from one net to another. One of them is the Openvpn server. This works but performance is not as good as possible. I think the limiting factor is the cpu power of the router. Would it be better if i use client-to-client connections and access the fileserver in the one net from a pc in the other, because the openvpn-server does not have to decrypt the (whole) packets?

  Read the article

• Windows xp media center, iTunes, Home sharing problem with app Remote and Apple tv2

  - by Amador

  Hello everybody, greetings from Mexico, sorry about my english but here it goes: I recently bought and apple tv 2nd generation it works just fine, i can see you tube videos but i cant see my library. My pc is conected to the same wi-fi than my apple tv. I have the latest software. I have my firewall off. I turned off and on my router. Search for iphone, ipad remotes on, sharing my library on my local network on, in itunes. Ive checked that my id was the same. On top of that the Remote app doesnt seem to work either. Please help, im kinda loosing my mind over this

  Read the article

• Windows 7 - saved wifi access points disappear from list

  - by KáGé

  I'm having a weird issue with Windows 7 x64: I'm moving my notebook between two locations weekly, at each I have a wifi router. They both have hidden SSID-s, which are different. If I save one, the other one gets deleted from the list, as if overwritten, so I always have to retype the SSID and password, if I want to connect after moving my computer. At first I tought the problem was caused by both routers having the same password, but after I changed one (suffixed it with "_2") it persisted. What can I do about this? Thanks.

  Read the article

• Ultimate way to use Picasa in a home network

  - by luisfarzati

  I've been trying a lot of approaches but still didn't find any effective solution. I want gigs of photos in a network drive (a IOMega Home Media Network Drive, plugged to my wifi router). I'd like to do 2 things: Do a Picasa import process of all the photos in the drive, making Picasa organize all the files in a year/month folder structure physically. Ideally, the import target directory should be the same network drive, otherwise I should move all the imported files in my local computer back to the drive myself. Share the Picasa database over the network, by uploading it to the network drive. Have me and other members of the family point our Picasas to the network database, and see the photos as well as make changes (tag faces, create logical albums, etc) into it. Is ANY possibility to accomplish this? Or should I be looking for another photo management app, and in that case do you know such one? Thank you!

  Read the article

• Unable to open websites that use HTTPS on linux

  - by negai

  I have the following network configuration: My PC 192.168.1.20/24 uses 192.168.1.1/24 as a gateway. Dlink-2760U router with Local address 192.168.1.1/24 has a VPN connection open with the provider using PPTP. Whenever I'm trying to open some web-sites that has some authorization (e.g. gmail.com, coursera.org), I'm getting a request timeout. This problem is observed mostly on linux (Ubuntu 12.04 and Debian 6.0), while most of such websites work correctly on windows XP. Could you please help me diagnose the problem? Could it be related to NAT + HTTPS? Thanks

  Read the article

• Why can't I access the WebUI of my DNS-323 NAS after a firmware upgrade?

  - by anonymous2

  Hi Everyone, I just bought a D-Link DNS-323 NAS Enclosure, and have run into a problem. I read that the firmware that had shipped with (1.07) did not support 2TB drives, so I downloaded firmware 1.08. Turned on the device for thwe first time and went straight to the WebUI (everything looked/worked fine) Proceeded with the firmware update, completed successfully. Rebooted and I cannot access the WebUI. I can see the NAS connected via my router interface I can also ping the ip adress assigned, but I cannot access the WebUI or find it via D-Link easy search software. I have tried the factory reset button, but that does not seem to be doing anything, the square blue light just keeps flashing from the moment the unit is powered on, whether I press the reset button or not, and the symptoms remain the same... PS. I did/do not have any drives installed yet. Please help?

  Read the article

• Wireless option grayed out in Windows Mobility Center

  - by thomasvdb

  We currently have a Lenovo ThinkPad L512 which can't connect to wireless networks. He simply indicates he can't find any networks. Other notebooks (also ThinkPad L512-notebooks) in the company do find the network so nothings wrong with the configuration of the wireless router. As indicated on answer.microsoft.com, I should check Windows Mobility Center and enable the entry "Turn Wireless On". Unfortunately this option has been grayed out. How can I enable this option? There isn't a physical switch on the laptop to turn on the wireless.

  Read the article

• cannot using internet in VMWare

  - by user66247

  I am using VMware Workstation version 7 on Ubuntu 10.10. I installed Windows XP service pack 3 for guest os. Within VMWare, I am using bridge connection that I assigned static IP address to be able to ping host IP address but I cannot ping default router gateway. I also tried to command "/etc/init.d/vmware start" on terminal. All tasks are able to start successfully except "VM communication interface socket family" I am not sure that how to setup network for my VMWare by using wireless. Thanks in advance.

  Read the article

• Iptables and counters

  - by mehturt

  I'm trying to use iptables counters with munin to monitor traffic of hosts on my local subnet. For each host I set up a rule like this: iptables -I OUTPUT -d $ip This should count the packets going from firewall to $ip, correct? I found out that this does not seem to count all packets. I start tcpdump on my router (Linux) and I see packets to $ip that are not counted. For example I check number of packets for rule to my phone IP. I start tcpdump, refresh Gmail on my phoone, I see packets in tcpdump's output but iptables rule counters are not incremented. Then I open a web page on the same phone and the counters are incremented. What could be the reason?

  Read the article

• Cannot SSH into Virtual Machine

  - by MasterGberry

  I am running a CentOS VM on my desktop that I use for development testing when coding in python. At my school I have a dedicated IP setup for the VM and my desktop so I never seem to have an issue ssh'ing from desktop into VM. I am now at home for winter break and cannot seem to SSH into the VM using the local ip address behind my router, the external IP with port 22 forwarded to my VM, or anything. Strangely enough I can ssh into my production server and then fromt here ssh into the VM, but not from my desktop to the VM directly What should I do to get this to work? Thanks

  Read the article

• forward same port but for two different IPs (cisco)

  - by Colin

  Hi! I have a cisco running IOS 12.0(25) responding to two different IPs addresses: IP_A and IP_B. Behind this router I also have two different servers: server_A and server_B. What I want is to forward port 22 to both servers, so: IP_A, port22 -> server_A, port22 IP_B, port22 -> server_B, port22 ATM this only works for one of them (server_A), this is my config: interface Ethernet0/0 description Internet ip address IP_A 255.255.255.0 ip address IP_B 255.255.255.0 secondary no ip directed-broadcast ip nat outside no ip mroute-cache no cdp enable ip nat pool pool_A IP_A IP_A netmask 255.255.255.0 ip nat pool pool_B IP_B IP_B netmask 255.255.255.0 ip nat inside source list A pool pool_A overload ip nat inside source list B pool pool_B overload ip nat inside source static tcp server_B 22 IP_B 22 extendable ip nat inside source static tcp server_A 22 IP_A 22 extendable access-list A permit server_A access-list B permit server_B

  Read the article

• How to collect figures of traffic used per-host, broken up by time and destination?

  - by Seishun

  We have a relatively small network, all PSs in one subnet. One PC with two NICs and pfSense installed works as a firewall/router. There is an OpenVPN tunnel to a remote location, created as a site-to-site connection to another pfSense box there. I have an assignment to capture, store and show (via a web interface) information on traffic generated (both incoming and outcoming) by each host on our subnet and present it in several views: megabytes per calendar hours / days / months / years (that is, not just "one month back", but "in Dec 2010" and so on); megabytes per destination: VPN to remote location / other destinations / Google Apps servers. I tried the software packages in pfSense that offer traffic montoring - but it seems they don't store the information fixed by months, instead showing the amounts of traffic generated in periods (days/months/etc) calculated from the present moment. I'm also interested in understanding what would be the best way for me to break up traffic by hosts and destinations. I'm open to all suggestions, even if they mean that I will have to understand something new to me.

  Read the article

• Installing WiFi in a church for internet access

  - by Dave Griffiths

  Hi, a colleague at work asked this question: My local church want to get WiFi enabled in the whole of their offices and main church building. The offices and main building are in the same overall structure and so the signal does not need to travel outside to any other buildings outside this main structure. Where would I start on such a project and what kind of repeaters are needed (and how are they set up) given that some of the walls are pretty thick. Do you still have one ADSL line coming in to router or are there some options of having two lines coming in so that they isn't a single point of failure. Am looking at fibre for the broadband for increased speed. Any starting pointers appreciated.

  Read the article

• Linux QoS (Skype / BitTorent / SIP / HTTP priority)

  - by Andre

  We are configuring a linux box that will act as internet gateway for an office of 30-50 computers. We are using iptables/HTB for traffic shaping. Is there a way to match traffic on L7 level? It's easy to identify traffic by TCP/UDP ports (like SIP and HTTP). But what if we are dealing with Skype & BitTorent? It was surprise for me that there is no powerful and matured sulution for tasks like this. I found only l7-filter (http://l7-filter.clearfoundation.com/) patch for the Linux kernel, but it's no longer supported (it seems to). Moreover it couldn't be compiled with modern Linux kernels. The only option I found was to use a Cisco router. Are there other ways to identify and shape Skype and Bittorent traffic?

  Read the article

• Computer connects to lan, but not the internet

  - by Jay

  I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

  Read the article

• node.js server not running

  - by CMDadabo

  I am trying to learn node.js, but I'm having trouble getting the simple server to run on localhost:8888. Here is the code for server.js: var http = require("http"); http.createServer(function(request, response) { response.writeHead(200, {"Content-Type": "text/plain"}); response.write("Hello World"); response.end(); }).listen(8888); server.js runs without errors, and trying netstat -an | grep 8888 from terminal returns tcp4 0 0 *.8888 *.* LISTEN However, when I go to localhost:8888 in a browser, it says that it cannot be found. I've looked at all the related questions, and nothing has worked so far. I've tried different ports, etc. I know that my router blocks incoming traffic on port 8888, but shouldn't that not matter if I'm trying to access it locally? I've run tomcat servers on this port before, for example. Thanks so much for your help! node.js version: v0.6.15 OS: Mac OS 10.6.8

  Read the article

• How does everyone set up AWS for PHP with a git workflow while worrying about distributing EC2?

  - by Parris

  Hello, I have been looking for something like heroku but for php, and after much frustration (and almost finding what I need, but not quite) we decided to just go with AWS without any other abstraction. We are using PHP 5.3 (and CakePHP 1.3), and are currently using git. Ubuntu seems like the easiest way to get both of those on there and we will most likely use that. We aren't really going worry about outgoing email. We are using smtp through gmail, but will most likely switch to some other service eventually. I had 3 questions: 1) I have been looking at Zend Server, and I am not quite sure how that is more beneficial than xampp. Perhaps it is not? 2) I suppose to make the application scale we would need multiple instances of some ec2 ami. Then just duplicate it and such. The question then becomes how do we make sure all EC2 instances are up to date? 3) I understand the concept of load balancing to some degree. I understand that in 1 region you select a bunch of servers and have it load balance across them. The question then becomes well how about world wide? How do I make it so that traffic is directed to the correct ec2 server? I have heard of route 53, and tried signing up for that, but nothing appears in my control panel. Also perhaps it is just a DNS thing with my domain registrar? AHHH... some tutorial would be helpful!

  Read the article

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

• How to setup Microsoft Remote Desktop?

  - by jsoldi

  I'm trying to establish a connection between this app and my Win 8.1 Pro PC, but every guide I've found so far skip steps such as what to put under PC name or under Gateway. Also, should the User name be my email or something else? I've also no idea how to find or add a user in the step 6 of this guide because the only location listed is my PC and I don't even know what am I supposed to search for. I'm not even sure whether I have to add a user or this is an step I can skip. A comprehensive guide for people without experience in networking would be highly appreciated. Both my android tablet and PC are connected to the internet through a home router, in case this matters.

  Read the article

• Two VPN connections from the same IP address

  - by Tayles

  I have set up a server running Windows Server 2008 which two remote users can dial into using a VPN connection. It works fine unless they are both in the same location, in which case only one of them can connect. I understand this is because the PPTP protocol cannot cope with two VPN connections from the same IP address. Is this correct? If so, what can I do about it? Please note that the remote location in question is a serviced office, so we're not in a position to change or play around with their router. Thanks!

  Read the article

• Access server by hostname without domain

  - by projectshave

  I want to access services on other machines on my home network with just their hostname. In every browser, "http://machine" fails, but adding a period in "http://machine./" works. Is there a way to avoid adding that extra period? My setup is a router with DD-WRT w/ DNSmasq turned on, Win7 machines and several Ubuntu VMs. nslookup works fine with just hostname. Remote desktop works, but TightVNC needs the extra period. ssh needs the period. As I said, all my browsers need the extra period. I'd prefer a solution that doesn't require manually maintaining the hosts file. Thanks.

  Read the article

• Not getting my normal internet speed but my other computers can?

  - by Dennis

  I have Comcast Xfinity and I cannot reach anywhere near my promised speed. My family desktop which is hardwired into the router reaches to 60Mbps and so do my parents computers and my brothers. I cannot seem to get anywhere close to it, I know with being wireless I won't reach it, but I should at least get somewhere close. I can only pull 6Mbps and thats terrible for what I should be receiving. Any clue what could be wrong here? Edit: I have 100% signal and I'm not behind any walls

  Read the article

• Amazon EC2 IPSEC

  - by John Qualis

  I have configured a ubuntu 12.04 64-bit server machine on Amazon AWS to act as a strongswan IPSEC server. I want to connect to it from my MAC OSX Lion's inbuilt IPSEC client. The OSX machine is in my home network. I log into the AWS machine using a ssh to ubuntu@public-ip and I provide the private RSA key in form of .pem file which I downloaded when the machine instance was created. The ssh connection works file but the IPSEC connection fails. What credentials/configurations should I provide for an IPSEC connection from my OSX client to AWS ubuntu server? My OSX machine is behind an ISP provided modem/router. Appreciate any help and thanks in advance

  Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >