Search Results

Search found 5670 results on 227 pages for 'zend router'.

Page 191/227 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

• How to put fear of God (law) into Wi-Fi hacking neighbors [closed]

  - by Shakehar

  I live in an apartment and some new guys have apparently moved into one of the apartments. They have been shamelessly hacking into my WiFi. Mine was initially a WEP encrypted network and out of laziness I just limited and reserved the IPS on my router for the people in my house. Yesterday I had to free up an IP for a guest in my house but before he could join the network these guys connected in. I have changed my encryption to WPA2 and hope they dont have the hardware/patience required to hack into it, but there are many wi-fi networks in my apartment most of which are secured using WEP. I don't really want to call the police on them. Is there any way to deter them from misusing other people's wi-fi ? I have gone through I think someone else has access to my wireless network. What next? but I have already taken the steps mentioned there.

  Read the article

• RV042 - how to broadcast UDP through VPN

  - by user47221

  I setup a gateway to gateway vpn connection with linksys RV042 router. i was able to ping each other, access file sharing ( with netbios enabled ). They are having same subnet mask 255.255.255.0, 192.168.1.0 <--- 192.168.2.0 Firewall disabled. But when i created/host LAN games (eg. warcraft3), it cannot be detect by clients at another site/LAN. As i know warcraft3 is using UDP broadcast to tell the client the game is creaetd. 1. How to broadcast UDP to another LAN ? any things to do with multicast ?

  Read the article

• Set Up Remote Desktop at Home

  - by Rev

  I'm sure this has been asked before, but I'm unable to find a clear set of instructions. I'm currently using LogMeIn Hamachi to enable Windows 8's Remote Desktop feature on my home computer (running Win8 Pro x64). Unfortunatley, I can't use this method to access my home computer from my Surface Tablet, as I can't install in the Hamachi client. So how can I set up Remote Desktop without using LogMeIn Hamachi? A link to a noob-friendly tutorial would be greatly appreciated. I haven't been able to find anything that I understand (and I am pretty technical, router stuff just stumps me for some reason). EDIT: And I don't want to use a third party service like TeamViewer, in my experience those tools are laggy and quite horrible. The Remote Desktop feature has been excellent.

  Read the article

• Ubuntu: On a network with many clients there are two machines that can't access the web via a browser at the same time

  - by ChrisInCambo

  Ok I'm pulling my hair out over this one. We have a wireless network with many clients all working well except two Ubuntu clients running 10.10 that can't access the internet via a browser at the same time. They can both still ping, use Skype etc but can't browse. As soon as the one that can browse exits the network browsing returns for the other and vice versa. As ping and Skype was working I assumed some kind of DNS problem but moving over to OpenDNS didn't solve it, nor did restarting networking or using wired rather than wireless. We also switched out the router, and it still persisted so I'm sure this isn't a network issue. The two clients are both laptops and work fine together on a wireless network at another office (which we don't control). I'm thinking something must be cached from the other network they both use that's causing this but have no idea what. Does anyone have any ideas? I just don't know where to go from here.

  Read the article

• Can't see a Windows XP computer on the network

  - by user56614

  I have two PC's connected to the same router. One is running Vista Home Premium and the other is running XP Pro. I'm trying to reach the shares of second PC from the first PC. I've enabled file sharing on the XP PC, I've disabled firewall and defender, and I can successfully ping it from the Vista PC. Both computers are set to the same workgroup "WORKGROUP". However, if I try to type "\\192.168.1.2" in Windows Explorer (192.168.1.2 being the IP address of the XP PC), I get a message: "Windows can't access \\192.168.1.2... Error code: 0x80004005 Unspecified error". And If I type "net view \\192.168.1.2" in command prompt, I get "System error 53 has occurred. The network path was not found." Am I missing something trivial?

  Read the article

• When should .local be used?

  - by hydroparadise

  So, I've set up a few Win Servs in my time and always did the .local thing when there was a router that sepearated my internal from external networks. Now that I'm setting up an *nix box for the first time, does this concept still apply? Do I still want my FQDNs (/etc/hostname) to show .local or .com for all my machines (mixed: linux servers, win workstations) inside of my network. This question comes in context of always having Active Directory hold my hand every step of the way, where now I'm setting up an DNS machine manually.

  Read the article

• D-link Local wireless

  - by Filippo

  I created a wireless network inside a D-Link DIR-301 connected to a Mac, What I want is that every device to connect to this network if the browser automatically opens instead of the default homepage, it redirects to my website already set in the localhost of the machine which also has the router attached. I'd also like to see that instead of the IP to connect to the site, there will be a "fake" link. What do you advise me? how can I proceed? I state that I am a bit novice in this field, being more a web programmer.

  Read the article

• Access to a network server without port forwarding

  - by SdevDavid

  I have a network with the following structure. The server in PC2 is simple socket server TCP in 8080 port. I need to access to PC2 from other external network by socket client. This socket client knows the public IP (85.xxx.xxx.x), the private IP (192.168.0.21) and the port. How I can access PC2 without port forwarding on the router? If possible, I would like to have a reference in any programming language of this case.

  Read the article

• Computer freezes, wireless network icon disappears

  - by Heidi

  As you can see I have two problems. I have a Toshiba Tecra A3 computer. It is 5-6 years old and it is connected to a D-link router. For a period now it has not been working correctly. The computer freezes either when i try turning it on or when I have been using the computer for a short period of time. The times the computer works normally I have a problem with a disappearing wireless network icon, and so I have no internet. Can this be fixed or do I have to buy a new computer? I only use the computer for internet surfing and easy tasks like word etc, so I would like to keep it as long as possible.

  Read the article

• Very frequent "Server not found" messages

  - by Village

  Recently, while browsing and clicking or typing an address, I get: "Server not found", "Connection was reset", or a half-loaded page. Usually the page loads instantly after clicking reload, but this means I must reload on every page. Images on one site, but stored at a different server don't load until reloading for a second time. Clicking "submit" on many sites frequently doesn't work unless I reload many times. Sometimes sites load, but without colors and formating, appearing as if they would in Lynx. This seems to happen with every Web site. My Internet service claims everything on their end is fine. This happened a day after running an update in aptitude. I have not updated any hardware. I have tried clearing Iceweasel's cache. I do not have any router or other equipment. What could be going on? How can I troubleshoot this? PPPoE connection, Iceweasel 3.5.16, Debian 6

  Read the article

• How to set up strongswan or openswan for pure IPSEC with iPhone client?

  - by Shabbyrobe

  I'm having trouble finding concrete, up-to-date information for how to set up strongswan or openswan to be used by the iphone's VPN client. My server is behind a budget linksys NAT router. I found this, but it mentions a whole bunch of .pem files with no reference for how to create them. Unfortunately, the "fine" manuals for both packages were quite inscrutable and unfriendly to a novice. I've set up OpenVPN before and managed to get serviceable results very quickly, but after a day and a half of reading out of date docs, I barely even know where to start. Any help would be greatly appreciated!

  Read the article

• Problems with connecting to wireless network on windows 7

  - by Naveen

  I have a Dell laptop with Windows 7 (Home premium) 64 bit edition installed on it. I use a Wi-Fi router to browse the net. My problem is, I lose the network connection every 10 minutes or so. The network icon on the system tray shows the refresh icon and the status as "identifying network". The network is fine and works fine with my phone. I saw on the net this may be caused if I have enabled IPv6, so I disabled it but still problem persists. When I look at the event log I see the following entries: "Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xXXXXXXXX. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." I have also installed VirtualBox(32 bit edition) on the laptop. Does anybody any solution to this?

  Read the article

• How can I restrict my mates to stop downloading?

  - by user239295

  We are sharing an internet broadband connection with 6 users at a place we live. We get 20 gb fup ( Fair usage policy) with 2 mbps speed from the ISP after the 20 gb is consumed the speed comes down to 512 kbps very difficult to browse any page. The problem is we cannot track which user/mate is downloading and ending the FUP. it is very difficult to track so is there something that we can allot per user some amount of space like 2 gb of downloading or restrict all from downloading so that we can utilize all the fup till the end of the month. We are using this connection as wifi configured. A adsl router is configured as wifi and we all using all 6 laptops. No PC. Any help would be appreciated. I apologize if i am not clear with my question.

  Read the article

• How can I connect a wired PC to the internet through my Macs wifi connection?

  - by David Weitz

  So I'll probably be buying a USB wifi adapater if I can't get this to work, but I'm trying. I have a wireless router at home and my Macbook Pro is connected to said wifi. My desktop doesn't have a wifi connection, but I've connected my macbook with my desktop via crossover cable. I enabled internet sharing on my macbook, but my Windows 7 desktop can't get a connection. I tried just regular file sharing and that works fine, but the internet sharing doesn't. I assume the goal is to get my PC to see my mac as the default gateway, but I've had no luck manually setting it. Here's the ifconfig output on my mac and my attempt at settings on windows: http://i.imgur.com/uJfUz.png

  Read the article

• Can't get port forwarding to work on Ubuntu

  - by Znarkus

  I'm using my home server as NAT/router, which works well. But now I'm trying to forward port 3478, which I can't get to work. eth0 = public interface eth1 = private network $ cat /proc/sys/net/ipv4/conf/eth0/forwarding 1 $ cat /proc/sys/net/ipv4/conf/eth1/forwarding 1 Then to forward port 3478 to 10.0.0.7, I read somewhere that I should run iptables -t nat -A PREROUTING -p tcp -i eth0 --dport 3478 -j DNAT --to-destination 10.0.0.7:3478 iptables -A FORWARD -p tcp -d 10.0.0.7 --dport 3478 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT I also ran ufw allow 3478 But testing port 3478 with http://www.canyouseeme.org/ doesn't work. Any idea what I have done wrong?

  Read the article

• How to setup VPN on home network

  - by Tone

  I am a software developer. I travel and sometimes have a need to access my files at home and tweak other family members computers. I would like to connect to my home network via VPN and then RDP into whatever machine i need to. Currently i have a Windows Server 08 machine, which is my file server, database server, web server (for development work), source control repository, etc. (and also somewhat of a workstation when i need it to be). I want to use this same machine to run my VPN through. I have a linksys WRTG54 router. My ISP is AT&T DSL, with a dynamic IP address - so i'm assuming I'll either need to request a static IP or sign up with one of those static ip services.. where it keeps your dynamic ip synced up with a static one. While I do understand software engineering I am no expert in networking. What do i need to do to setup my VPN?

  Read the article

• DNS for route between WAN & LAN

  - by David Maitland

  I have a few machines set up on my internal 192.168.1.* network and i have one public ip, my router is links all ports to on internal linux machine on my network 192.168.1.3. I want to know how to configure the DNS server on my linux box to forward to internal LAN ip's depending on the host name. EG. computer4.83.22.56.12 would find my box then forward to 192.168.1.4 on the local network. This is so i can run multiple web server under one ip. btw, i use Ubuntu. Thanks Dave

  Read the article

• Optimize Apache performance

  - by Phliplip

  I'm looking for ways to optimize our current web server hosted in-house. I'm trying to supply as much relevant information below. Please let me know if you would require additional information in order to assist. Server is running 1 single website, which is an online pizza ordering platform built on Zend Framework (ver1). On traffic stats from the last month aprox 6.000 pageloads per day, concentrated mainly around dinnertime. Around 1500 loads/hour peaks in that period. We recently upgraded from a 2/2mbit aDSL-line to 100/100mbit fiber, and we still have performance issues at dinner time. We assumed the 2mbit was the issue. Website is pretty snappy in low-load periods. Hardware CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.13-MHz K8-class CPU) Mem: 328M Active, 4427M Inact, 891M Wired, 244M Cache, 623M Buf, 33M Free Swap: 16G Total, 468K Used, 16G Free (6GB physical, 16GB swap) Filesystem Type Size Used Avail Capacity Mounted on /dev/ad7s1a ufs 4.8G 768M 3.7G 17% / devfs devfs 1.0K 1.0K 0B 100% /dev /dev/ad7s1g ufs 176G 5.2G 157G 3% /home /dev/ad7s1e ufs 4.8G 2.8M 4.5G 0% /tmp /dev/ad7s1f ufs 19G 3.5G 14G 19% /usr /dev/ad7s1d ufs 4.8G 550M 3.9G 12% /var Server OS FreeBSD 8.2-RELEASE Software apache-2.2.17 php5-5.3.8 mysql-server-5.5 Apache footprint (example, taken from # top) 31140 www 1 45 0 377M 41588K lockf 2 0:00 0.00% httpd 31122 www 1 44 0 375M 35416K lockf 2 0:00 0.00% httpd 31109 www 1 44 0 375M 38188K lockf 2 0:00 0.00% httpd 31113 www 1 44 0 375M 35188K lockf 2 0:00 0.00% httpd Apache is using the prefork MPM, APC (Alternative PHP Cache). SSL module is loaded, but not utilized (as in don't really work, thus not used). There is a file containing settings for MPM modules, but as i see it's not included in the httpd.conf file, the include line is commented out. Thus i would guess that the prefork MPM is working of default values too. Here are some other Apache conf values that i found - which are included in https.conf Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 UseCanonicalName Off HostnameLookups Off

  Read the article

• How to configure OpenVPN server to use custom default gateway?

  - by Arenim

  I have a vpn server at address 10.1.0.2 and the server have another ip in it's network -- 10.0.0.2 in his subnet (it's a tun2socks router). But default server's gateway is NOT 10.0.0.2 (and it's ok) but another external IP. I want all the client's traffic to be forwarded through this ip address -- 10.0.0.2. Here is part of my server's config: dev tap0 server-bridge 10.1.0.1 255.255.255.0 10.1.0.50 10.1.0.100 push "route 10.0.0.0 255.255.255.0" ; now client can ping 10.0.0.2 push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 10.1.0.1" push "dhcp-option WINS 10.1.0.1" in fact i want some like push "redirect-gateway 10.0.0.2" How can I achieve this?

  Read the article

• Get OpenVPN clients names to resolve through dnsmasq

  - by Fake Name

  I have a PFSense box running as an OpenVPN server. There are several remote devices that connect through the VPN (as tap devices). The VPN stuff is working, I can access the remote hardware by looking up the IP assigned to each device on the PFSense router. What I'd like is to have it so I can resolve the remote hardware addresses via DNS while on the local network. Note that this is only local-network - remote-device (they're backup boxes). I don't need to have the remote devices resolve using the local DNS forwarding agent. I have the rest of the devices on the network that need to be accessible via DNS report their name during the DHCP process. However, the IP assignment for OpenVPN tap clients, while it is dynamic (which is why I need DNS), does not seem to use the local DHCP server. How can I have my openvpn server add information for it's clients to the dnsmask resolver? Is this setup even reasonable (I'm not familiar with openVPN at all)?

  Read the article

• Firewall is blocking internet traffic to OpenVPN clients

  - by user268905

  I have a virtual network setup with a Linux router/firewall connected to two private networks. An OpenVPN server in routing mode and a web server are in one of the networks. On the other are linux client machines which access the webserver and the Internet through the OpenVPN server. Also, external clients can access the OpenVPN from the Internet. The OpenVPN's server.conf is setup to use routing mode in udp, push DNS and routes to the network it is in so clients can access the webserver. Here are my very strict firewall rules. After connecting to the OpenVPN server, my clients can not access the Internet or the web server. When I allow FORWARD traffic to go through, it works just fine. The OpenVPN server has full internet connectivity. What firewall rule do I need to add to allow internet traffic to reach my clients?

  Read the article

• Can't access server from external IP

  - by Mathias

  I have a problem with my web server; I can't access it from the external IP address. I'm using an IIS 7 server, but I've tried with apache on Linux as well. I have forwarded all traffic on port 80 to my computer, but it just won't work. I've done port forwarding with my Minecraft server, and it did work, but when I try it with a web server, no. I've been looking on many many forums, but their methods don't work for me. My router is a Speedport W 723V, if anyone knows that one. Any help is appreciated.

  Read the article

• Is 50% download speed on a wireless G network normal?

  - by Bartlomiej Skwira

  I have a wired connection of about 36Mb/s, but my wireless speed is max at about 18-19Mb/s. I have a WRT54G-TM (T-Mobile, 802.11G) router with DD-WRT firmware - I've upgraded it to latest build. Done some settings changes: changed channel - 13 wireless network mode - G-only ACK Timing - 0 Fragmentation Threshold and RTS Threshold - 2304 Basic Rate - All Signal/Noise ratio: -46/-94, signal quality ~50-60%. Is this normal with G networks? Edit: The AP is located about 2 meters from laptop, no walls or metal objects, but its next to a TV. I've done a channel scan (had problems locating it, go to "Status - Wireless - Site survey" - lame naming) and everybody else is on channels 1 and 6. Switched to channel 11 but it didn't help. As for trasmit power I got best results with default 71mw. The antenna might be a factor, I'm using the default 2 antennas.

  Read the article

• Share the DVB card on windows 7 [closed]

  - by Bashar Kernel

  I have 2 computers connected to a router and I have a DVB card in one of them. I want to use the one DVB card to feed both of them. I read about it and I know that I want to share the DVB adapter with the Internet Connection Sharing on the LAN network. But when I use the connection sharing, I lose my internet access I tried to use "Bridge Connection", but then I also lost my internet access too. Can any one tell me how to fix this problem? And how to view the channels (for example how to use the VLC)?

  Read the article

• Improving sound quality with remote ESD server

  - by cuu508

  Hi, I'm investigating low-budget ways to get audio from my PC (Ubuntu) to HiFi without wires. I'm currently testing a setup where Asus WL-500gP wireless router runs ESD daemon and has attached USB soundcard which is then plugged into HiFi. I'm testing playback on PC with mpg123-esd and Spotify under Wine. The sound is there, latency is unexpectedly low, but I also hear occassional clicks and some distortion from time to time. I suppose that's because of the low latency and wireless streaming of uncompressed audio--any packet drops, CPU temporarily being busy etc. will cause clicks in sound output. Is there a way around this problem, increasing latency / buffer size somehow perhaps? Streaming using shoutcast protocol seems to be a way out but I have feeling that would be a complex and brittle setup.

  Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >