Search Results

Search found 95574 results on 3823 pages for 'mac osx server'.

Page 1923/3823 | < Previous Page | 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930  | Next Page >

• 10GE network: Is it still deadly expensive? Any options?

  - by BarsMonster

  Hi! I am building home cluster where I going to have about 16 nodes which can live with 1G ports, but I really want to have 10GE on file server & central node. It's all local, so no need for cabels longer than 3-5m. And ofcourse I want to spend as little money as possible (not going to spend more than whole cluster costs) :-) What are my options? 1) Legacy solution is to take some 24-48 port 1GE switch, and connect to file/central nodes via 4-8 aggregated links. This will work I guess, cost is very acceptable, but I am not sure if it's ok to use that much aggregated links. And ofcourse it would be hard to double bandwidth when needed... :-D 2) Switch with several 10GE uplink 'ports'. As far as I see, they all require modules which costs about 1000$, so I will need 4 10G modules, and 2 10GE cards... Smells like way more than 5000$+... 3) Connect file & central node via 2 10G cards directly, and put 4 quadport 1GE NICs on fileserver. I am saving on 2 10G modules and a switch, fileserver will have to do packet routing, but it's still gonna have alot of CPU's left :-) 4) Any other options? Infiniband? 5) Are MyriNet adaptors works fine? I guess there are no cheaper options? 6) Hmm... Scrap fileserver, put it all on central node and provide dedicated 1GE port for each of the nodes... This is sad...

  Read the article

• Blocking an IP in Webmin

  - by Dan J

  I've been checking my /var/log/secure log recently and have seen the same bot trying to brute force onto my Centos server running webmin. I created a chain + rule in Networking - Linux Firewall: Drop If source is 113.106.88.146 But I'm still seeing the attempted logins in the log: Jun 6 10:52:18 CentOS5 sshd[9711]: pam_unix(sshd:auth): check pass; user unknown Jun 6 10:52:18 CentOS5 sshd[9711]: pam_succeed_if(sshd:auth): error retrieving information about user larry Jun 6 10:52:19 CentOS5 sshd[9711]: Failed password for invalid user larry from 113.106.88.146 port 49328 ssh2 Here is the contents of /etc/sysconfig/iptables: # Generated by webmin *filter :banned-ips - [0:0] -A INPUT -p udp -m udp --dport ftp-data -j ACCEPT -A INPUT -p udp -m udp --dport ftp -j ACCEPT -A INPUT -p udp -m udp --dport domain -j ACCEPT -A INPUT -p tcp -m tcp --dport 20000 -j ACCEPT -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT -A INPUT -p tcp -m tcp --dport https -j ACCEPT -A INPUT -p tcp -m tcp --dport http -j ACCEPT -A INPUT -p tcp -m tcp --dport imaps -j ACCEPT -A INPUT -p tcp -m tcp --dport imap -j ACCEPT -A INPUT -p tcp -m tcp --dport pop3s -j ACCEPT -A INPUT -p tcp -m tcp --dport pop3 -j ACCEPT -A INPUT -p tcp -m tcp --dport ftp-data -j ACCEPT -A INPUT -p tcp -m tcp --dport ftp -j ACCEPT -A INPUT -p tcp -m tcp --dport domain -j ACCEPT -A INPUT -p tcp -m tcp --dport smtp -j ACCEPT -A INPUT -p tcp -m tcp --dport ssh -j ACCEPT -A banned-ips -s 113.106.88.146 -j DROP COMMIT # Completed # Generated by webmin *mangle :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed # Generated by webmin *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed

  Read the article

• Does IIS Sometimes Allocate More Worker Processes Than Configured?

  - by Paul Williams

  We have an IIS 7.5 web service on Windows Server 2008 that handles WCF requests from C# clients. This service is configured to have Maximum Worker Processes = 1, so it is not a web garden. IIS is setup to recycle itself at the same time every day (3 AM). I am trying to debug gnarly connection issues, so I wanted to be sure the application pool was not recycling itself. I configured the pool to log an event when it recycles itself. To my surprise, I see the following entries in the System event log: Level: Information Date/Time: 3/23/2012 3:00:00 AM - Source: WAS - Event ID: 5076 A worker process with process id of '6636' serving application pool 'MyAppPool' has requested a recycle because it reached its scheduled recycle time. Level: Information Date/Time: 3/23/2012 2:59:39 AM - Source: WAS - Event ID: 5076 A worker process with process id of '9364' serving application pool 'MyAppPool' has requested a recycle because it reached its scheduled recycle time. IIS is correctly recycling the application pool at 3 AM. However, I do not understand why I would be getting two recycle events in the log within a few seconds of each other. The maximum number of processes is 1. Does IIS sometimes allocate multiple processes for an application pool that is specified as having 1 process? -- edit -- I connected at about 4 PM today and only saw 1 w3wp.exe process. There are no other event log entries that would indicate a crash.

  Read the article

• How can I switch from a custom linux network namespace back to the default one?

  - by Martin

  With ip netns exec you can execute a command in a custom network namespace - but is there also a way to execute a command in the default namespace? For example, after executing these two commands: sudo ip netns add test_ns sudo ip netns exec test_ns bash How can the newly created bash execute programs in the default network namespace? There is no ip netns exec default or anything similar as far as I've found. My scenario is: I want to run a SSH server in a separate network namespace (to keep the rest of the system unaware of the network connection, as the system is used for network testing), but want to be able to execute programs in the default network namespace via the SSH connection. What I've found out so far: Created network namespaces are listed as files under /var/run/netns (but there is no file for the default namespace) The ip netns exec code can be found here: http://git.kernel.org/cgit/linux/kernel/git/shemminger/iproute2.git/tree/ip/ipnetns.c#n132 - I haven't grasped everything that it is doing yet, but it doesn't look very promising. ip netns identify $$ as suggested by Howto query and change network namespace on linux? returns nothing when in the default network namespace

  Read the article

• How to encourage Windows administrators to pick up scripting?

  - by icelava

  When I worked as an administrator in my first job, I was frustrated that our administration processes with Windows servers were a series of point-and-clicks; we could never match the level of efficiency with the Unix servers which had a group of shell scripts to automate a lot of the work. I soon read about WSH and ADSI and wasted no time learning just how much automation I was able to achieve with scripting. There was a huge problem though - almost none of my Windows colleagues were really interested in learning scripting. They seemed happy with the manually mouse-clicking chores and were never excited at the prospect of using scripts to do the work on their behalf. I struggled to convince them to pick up scripting skills despite the evident increases in efficiency. I left that job in pursuit of a full-time software development career thereafter. Almost a decade on working in various environments and different customers, I still encounter Windows administrators mainly possessing this general "mood" where they would avoid scripting as much as possible. Despite the increasing level of accessibility Windows server technologies are opening up for scripting and automation. I am almost certain the majority of administrators are administrators precisely because they absolutely hate performing any kind of programming duties. What are some means to encourage and motivate administrators that scripting can really help them in the long run?

  Read the article

• Unable to login through varnish cache

  - by ArunS

  I am setting up Active Collab Site in my new server. The setup is like below Internet --- varnish ---- apache But i am not able to login to the site through varnish cache.. But i can login to site through apache. Here is my VCL file backend default { .host = "localhost"; .port = "8080"; } acl purge { "localhost"; } sub vcl_recv { if (req.request == "PURGE") { if (!client.ip ~ purge) { error 405 "Not allowed."; } return(lookup); } if (req.url ~ "^/$") { unset req.http.cookie; } } sub vcl_hit { if (req.request == "PURGE") { set obj.ttl = 0s; error 200 "Purged."; } } sub vcl_miss { if (req.request == "PURGE") { error 404 "Not in cache."; } if (!(req.url ~ "wp-(login|admin)")) { unset req.http.cookie; } if (req.url ~ "^/[^?]+.(jpeg|jpg|png|gif|ico|js|css|txt|gz|zip|lzma|bz2|tgz|tbz|html|htm)(\?.|)$") { unset req.http.cookie; set req.url = regsub(req.url, "\?.$", ""); } if (req.url ~ "^/$") { unset req.http.cookie; } } sub vcl_fetch { if (req.url ~ "^/$") { unset beresp.http.set-cookie; } if (!(req.url ~ "wp-(login|admin)")) { unset beresp.http.set-cookie; }} When i try to login through varnish i was redirect back to login page. If i enter wrong password, then it will ask for enter correct password.

  Read the article

• 'Bug in Mailman version 2.1.12'

  - by davorg

  I'm working on setting up a server running Plesk 10.4.4 Update #13 on Centos 6.2. I've configured Mailman and now I want to set up some mailing lists. I've created a list in the Plesk control panel, but when I try to administer the new list (by visiting http://lists.[domain].com/mailman/admin/[listname] I see the following error: Bug in Mailman version 2.1.12 We're sorry, we hit a bug! Please inform the webmaster for this site of this problem. Printing of traceback and other system information has been explicitly inhibited, but the webmaster can find this information in the Mailman error logs. I see exactly the same error if I try to go to the list info page at http://lists.[domain].com/mailman/listinfo/[listname]. I would follow the instructions and look in the error logs, but I can't find them. I would expect to find a file at /var/log/mailman/error, but there's nothing there. My test list seems to work correctly. It sends all the expected email. It's just the web pages for the list that seem to be broken. Has anyone else seen this? Any suggestions for tracking down and fixing the problem? p.s. I think I've chosen the correct Stack Exchange site, but it this question would be better asked elsewhere, please let me know. Update: I got to the bottom of this, so I'm documenting the answer in case anyone else has the same problem. The fact that I couldn't find the error log was the clue. The problem was that the Mailman process didn't have permissions to create an error log. And it seems that if Mailman can't create an error log then it will respond to any web request with this error page. Creating an error log file (in /var/log/mailman/error) and giving it the correct permissions fixed the problem.

  Read the article

• Preventing h/w RAID cards from dropping slow JBOD disks

  - by Kevin

  I'm considering buying a used SAS h/w RAID card for externally attaching HDDs to an HP ProLiant I'm setting up. However, I only require RAID functionality on some of the drives. Theoretically it should be simple to JBOD the other drives, but some of them are inexpensive SATA disks and probably cannot have TLER disabled. I'd like to know, prior to actually ordering a RAID card, whether typically RAID cards would still enforce dropping of disks that do not respond within a few seconds, even if the disk is in a JBOD, and whether there is any way to disable this. Ideally it would be nice to be able to select certain SAS ports that will be pass-through, bypassing the RAID engine entirely and just acting as an HBA for those ports. I know I could buy a separate SAS HBA but that seems like a waste of $ and is also impractical as it's a 1U server so space is extremely limited. My question then is whether the functionality I'm looking for (pass-through on certain ports or at least JBOD drives not getting themselves dropped due to slow response) is typical of proper h/w RAID cards such as PERC 5/E etc. I've browsed through the latter's manual but unfortunately, as with most user manuals, it states the obvious and doesn't state the unobvious. Thanks for any info, Kevin

  Read the article

• How do I format this regex so it will work in fail2ban?

  - by chapkom

  I've just installed fail2ban on my CentOS server in response to an SSH brute force attempt. The default regular expressions in fail2ban's sshd.conf file do not match any entries in audit.log, which is where SSH seems to be logging all connection attempts, so I am trying to add an expression that will match. The string I am trying to match is as follows: type=USER_LOGIN msg=audit(1333630430.185:503332): user pid=30230 uid=0 auid=500 subj=user_u:system_r:unconfined_t:s0-s0:c0.c1023 msg='acct="root": exe="/usr /sbin/sshd" (hostname=?, addr=<HOST IP>, terminal=sshd res=failed)' The regular expression I am attempting to use is: ^.*addr=<HOST>, terminal=sshd res=failed.*$ I've used regextester.com and regexr to try to build the regex. The testers give me a match for this regex:^.*addr=\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}, terminal=sshd res=failed.*$ but fail2ban-regex complains if I don't use the <HOST> tag in the regex. However, using ^.*addr=<HOST>, terminal=sshd res=failed.*$ gives me 0 matches. At this point, I am totally stuck and I would greatly appreciate any assistance. What am I doing wrong in the regex I am trying to use?

  Read the article

• Mod_rewrite to eliminate query strings

  - by Greg Frommer

  Hi everyone, I have been working on this for a while but I'm not finding exactly what I am looking for. I am writing a webapp to let my users create and publish pieces of HTML content in a domain and URL folder structure of their choosing. All of the content and requested URL structures are stored in a database. I have all of the code in my index.php (in the root folder) to access the database content, and based on the server name (and hopefully folder structure) will pick out the proper content from the DB and display it to the end-users browser. So my situation looks like this: www.test.com/index.php?id=123234345 ... will display the proper page, but I want my users to be able to define a unique "page name" instead of using the numeric index (also I want to hide the /index.php part) so what I would like the end-user to see is: www.test.com/arbitrary-unique-keyword/keyword2/keyword3 which will invoke the index.php page in the root folder. Then I will use the PHP $_SERVER['PATH_INFO'] variable to match the requested folder structure up with the proper content in my database and display that. All the material I have found so far expects me to hard code parts of the folder structure into the rules.... but I think I want something simpler (perhaps). So the question in a nutshell: How do I use mod_rewrite to allow all "non-existent" folder paths be passed through to a main index.php residing in the root folder? (For all paths that DO exist, like for calls to images... I want those to succeed and not be directed to the index.php obviously) Thanks everyone, please let me know if I can clear anything up.

  Read the article

• Apache2 Re-Routing from Domain Name to Internal IP Address

  - by Richard Grey

  The problem that I am having, is that when someone goes to my domain name example.co.uk, for some reason, apache seems to be re-routing the request to the internal IP address of the server, i.e. 192.168.0.52 My Apache2 default sites enabled file is as follows: ServerAdmin [email protected] ServerName trusteeguard.co.uk ServerAlias www.trusteeguard.co.uk DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride All Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/trusteeguard-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/trusteeguard-access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride All Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> This is an Ubuntu box if that is any help ;)

  Read the article

• Blocking HTTPS and P2P Traffic

  - by Genboy

  I have a Debian server running at the gateway level on a LAN. This runs squid for creating block lists of websites - for eg. blocking social networking on the LAN. Also uses iptables. I am able to do a lot of things with squid & iptables, but a few things seem difficult to achieve. 1) If I block facebook through their http url, people can still access https://www.facebook.com because squid doesn't go through https traffic by default. However, if the users set the gateway IP address as proxy on their web browser, then https is also blocked. So I can do one thing - using iptables drop all outgoing 443 traffic, so that people are forced to set proxy on their browser in order to browse any HTTPS traffic. However, is there a better solution for this. 2) As the number of blocked urls increase in squid, I am planning to integrate squidguard. However, the good squidguard lists are not free for commercial use. Anyone knows of a good squidguard list which is free. 3) Block yahoo messenger, gtalk etc. There are so many ports on which these Instant Messenger softwares work. You need to drop lots of outgoing ports in iptables. However, new ports get added, so you have to keep adding them. And even if your list of ports is current, people can still use the web version of gtalk etc. 4) Blocking P2P. Haven't been able to figure out how to do this till now.

  Read the article

• How to test a HTTPS URL with a given IP address

  - by GreatFire

  Let's say a website is load-balanced between several servers. I want to run a command to test whether it's working, such as curl DOMAIN.TLD. So, to isolate each IP address, I specify the IP manually. But many websites may be hosted on the server, so I still provide a host header, like this: curl IP_ADDRESS -H 'Host: DOMAIN.TLD'. In my understanding, these two commands create the exact same HTTP request. The only difference is that in the latter one I take out the DNS lookup part from cURL and do this manually (please correct me if I'm wrong). All well so far. But now I want to do the same for an HTTPS url. Again, I could test it like this curl https://DOMAIN.TLD. But I want to specify the IP manually, so I run curl https://IP_ADDRESS -H 'Host: DOMAIN.TLD'. Now I get a cURL error: curl: (51) SSL: certificate subject name 'DOMAIN.TLD' does not match target host name 'IP_ADDRESS'. I can of course get around this by telling cURL not to care about the certificate (the "-k" option) but it's not ideal. Is there a way to isolate the IP address being connected to from the host being certified by SSL?

  Read the article

• How to install/configure ffmpeg to compress mp4 videos for flash player delivery?

  - by Andrew Fulton

  We have a flash web-app that created interactive video, and are using ffmpeg to do some compression/resizing when a user "publishes" their project. The user can upload flv files and mp4 files, both of which play fine in the Flash UI before publishing. After publishing the flv files work fine, but the mp4 files will not play in the flash player: Audio will play but video won't. The mp4 files will play fine if I download them and play them in the Quicktime player but if I attempt to open them in the Adobe Media Player it reports "The media file does not contain a supported video track". If I open the Movie inspector in quicktime it tells me that the original file is an "h264" video and the ffmpeg-processed ones are "mpeg-4". I have tried forcing it to h264 by adding flags like -f h264 and -vcodec h264 but I get a screenfull of errors (no frame, illegal POC type, sps_id out of range) ending with Could not find codec parameters (Video: h264) h264 will show up if I run ffmpeg -formats and ffmpeg -codecs, and as I said it will play fine in Quicktime. Is there anything else I need to do to convince the flash player to play them? Is there anything else I need to tell you about the server that will help?

  Read the article

• PHP 5.3.2 Upgrade on Windows

  - by mcondiff

  I have a development box running Windows XP, Apache 2.2.15 Mysql and PHP 5.2.6 About a month ago I updated the Apache to the latest version and it went swimmingly. I am not having the same success with upgrading PHP to the latest version. I backed up my PHP directory and then deleted it. Used the Windows Installer for PHP 5.3.2, installed as an Apache 2.2.X module. I can get "Hello World" and phpinfo() to come up but cannot get mysql to connect. I have the extension un-commented in the php.ini and shouldn't really have to touch the Apache httpd.conf file since I didn't change the directory of PHP. Not sure what I'm doing wrong here. I have to get this right and then upgrade the Live Server too so I want to get this down pat. I've tried to use installation guides on the web with no luck. Any info pertaining to this problem would be great. I'm also afraid that the other PHP modules may not load but cannot really tell anything past mysql not working.

  Read the article

• ubuntu 10.04 + php + postfix

  - by mononym

  I have a server I am running: Ubuntu 10.04 php 5.3.5 (fpm) Nginx I have installed postfix, and set it to loopback-only (only need to send) The problem is it is not sending. if i issue (at command line): echo "testing local delivery" | mail -s "test email to localhost" [email protected] I get the email no problem, but through PHP it does not arrive. When I send it via PHP, mail.log shows: Mar 28 10:15:04 host postfix/pickup[32102]: 435EF580D7: uid=0 from=<root> Mar 28 10:15:04 host postfix/cleanup[32229]: 435EF580D7: message-id=<20120328091504.435EF580D7@FQDN> Mar 28 10:15:04 host postfix/qmgr[32103]: 435EF580D7: from=<root@FQDN>, size=1127, nrcpt=1 (queue active) Mar 28 10:15:04 host postfix/local[32230]: 435EF580D7: to=<root@FQDN>, orig_to=<root>, relay=local, delay=3.1, delays=3/0.01/0/0.09, dsn=2.0.0, status=sent (delivered to maildir) Mar 28 10:15:04 host postfix/qmgr[32103]: 435EF580D7: removed any help appreciated, my main.cf file: smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = FQDN alias_maps = hash:/etc/aliasesalias_database = hash:/etc/aliases myorigin = /etc/mailname #myorigin = $mydomain mydestination = FQDN, localhost.FQDN, , localhost relayhost = $mydomain mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = loopback-only virtual_alias_maps = hash:/etc/postfix/virtual home_mailbox = mail/

  Read the article

• IIS replication - Is it possible

  - by Ian

  Hi All, I have a requirement for a client that I have a centralised system that all his satellite branches can work on. Currently this is a ASP.net web forms app running under IIS 7 on win 2008 RC 2 using an SQL backend. The client has now requested that each branch have a local server, so that in the event that the internet connection is down, the branches productivity does not suffer. His other request is that everything can be updated via the central hub and using some mechanism the updates filter down to the individual sites. What are my options here? I see the following as possible options: Multiple redundant internet connections controlled by load balancers SQL replication for the DB (What is better, snapshot, merge or transactional) Roll my own IIS sync service the periodically checks if there is a new version of the web app and downloads it (I hope there are better option than this) Something way better I don’t yet know about (I hope this is the one I need) One of my clients concerns are that the branches are often in very remote areas where everything from technicians to internet is hard to find and very scarce. Any ideas, suggestions, tips etc are welcome. Thanks all

  Read the article

• iptables configuration under ubuntu

  - by aioobe

  I'm following a tutorial on setting up a dns-tunnel. I've run into the following instruction: Now you need to enable forwarding on this server. I use iptables to implement masquerading. There are many HOWTOs about this (a simple one, for example). On Debian, the configuration file for iptables is in /var/lib/iptables/active. The relevant bit is: *nat :PREROUTING ACCEPT [6:1596] :POSTROUTING ACCEPT [1:76] :OUTPUT ACCEPT [1:76] -A POSTROUTING -s 10.0.0.0/8 -j MASQUERADE COMMIT Restart iptables: /etc/init.d/iptables restart The problem is that I don't have any /var/lib/iptables/active. (I'm on ubuntu.) How can I accomplish this? I suspect that I should just interact with the iptables command somehow but I have no clue what to write. Best would probably be if I could put the commands in a script somehow I suppose. (A side-note. If I execute a few iptables-commands it wont be there for ever, right? The rules will be discarded on reboot?)

  Read the article

• Varnish returning 503, FetchError (could not get storage)

  - by Archan

  On the current setup we're running into a problem with Varnish, we're running a CentOS 5.7 x86_64 xenpv, with Cpanel WHM, hosted at VPS.net. Sometimes we will recieve a Guru Meditation from Varnish, and when we look in the varnishlog with the following command varnishlog -d -c -m TxStatus:503 it returns output similar to the following: 15 VCL_call c recv 15 VCL_acl c NO_MATCH devs 15 VCL_return c pass 15 VCL_call c hash 15 Hash c **** 15 Hash c ************* 15 VCL_return c hash 15 VCL_call c pass pass 15 Backend c 12 default default 15 TTL c 1835862523 RFC 0 -1 -1 1332454056 0 1332454055 375007920 0 15 VCL_call c fetch hit_for_pass 15 ObjProtocol c HTTP/1.1 15 ObjResponse c OK 15 ObjHeader c Date: Thu, 22 Mar 2012 22:07:35 GMT 15 ObjHeader c Server: Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 mod_fcgid/2.3.6 15 ObjHeader c X-Powered-By: PHP/5.3.9 15 ObjHeader c Expires: Thu, 19 Nov 1981 08:52:00 GMT 15 ObjHeader c Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 15 ObjHeader c Pragma: no-cache 15 ObjHeader c Content-Type: text/html; charset=utf-8 15 ObjHeader c X-Cacheable: NO:Cache-Control=private 15 FetchError c chunked read_error: 12 (Could not get storage) 15 VCL_call c error deliver 15 VCL_call c deliver deliver As far as I have could gather, we could try increasing the nuke_limit, but currently we have a nuke_limit of 500, and when running varnishstat -1 -f n_lru_nuked we "only" get a total of 1031, even though we have seen the error happen on several pages. When we then run top to see how much memory Varnish is using, it only shows that it is using 763m, although we've set it to be allowed to use 1200m. Any ideas of what the problem can be?

  Read the article

• EMC VNX iSCSI setup - unsure about SP/port assignment

  - by pauska

  We have a new VNX5300 waiting to get configured, and I need to plan out the network infrastructure before the EMC tech arrives. It has 4x1gbit iSCSI per SP (8 ports in total), and I'd like to get the most out of the performance until we jump over to 10gig iSCSI. From what I can read from the docs - the recommendation is to use only two ports per SP, with 1 active and 1 passive. Why is this? It seems kind of pointless to have quad-port i/o-modules and then recommend to not use more than two of them? Also - I'm a bit unsure about the zoning. The best practices guide state that you should separate each port on each SP from each other on different logical networks. Does this mean that I have to create 4 logical networks to be able to use all 8 ports? It also gives the following example: Does this mean that A0 and B0 should sit on the same physical switch aswell? Won't this make all traffic go on one switch (if both A1 and B1 are passive)? Edit: Another brainpuzzle I don't get it - each host (as in server) should not have more iSCSI bandwidth available than the storage processor. What on earth does this matter? If serverA have 1gbit and serverB have 100mbit, then the resulting bandwith between them is 100mbit. How can this result in some kind of oversubscription? Edit4: Wait, what. Active and passive ports? The VNX runs in a ALUA configuration with asymmetrical active/active.. there shouldn't be any passive ports, only preferred ones..

  Read the article

• Oracle: Getting ORA-01195 and ORA-01110 when attempting resetlogs

  - by MacAnthony

  I am trying to get our database to startup. When I login to sqlplus and do a startup, I get the message: Total System Global Area 534462464 bytes Fixed Size 2215064 bytes Variable Size 331350888 bytes Database Buffers 192937984 bytes Redo Buffers 7958528 bytes Database mounted. ORA-01589: must use RESETLOGS or NORESETLOGS option for database open So I do a shutdown, startup mount (which works fine) and then run: SQL> alter database recover using backup controlfile until cancel; alter database recover using backup controlfile until cancel * ERROR at line 1: ORA-00283: recovery session canceled due to errors ORA-19909: datafile 1 belongs to an orphan incarnation ORA-01110: data file 1: '/<path>/system01.dbf' SQL> alter database open resetlogs; alter database open resetlogs * ERROR at line 1: ORA-01195: online backup of file 1 needs more recovery to be consistent ORA-01110: data file 1: '/<path>/system01.dbf' I know I've used instructions to get me past this error before, but I seem to be having trouble tracking it down. A bit of history: We wanted to refresh the data in this from another db so we attempted to do a expdb/impdb into this instance. The impdb did not complete correctly and got an end of file error message in it and hung (I still have the message in a log if it's important). Since the instance would start at this point, we decided to use the hotbackup process we have to restore the db. The hotbackups are from another server/instance. We went through the same process 2 weeks ago. At the point of recreating the control file is where we got to the issue above.

  Read the article

• Nginx + PHP-FPM Too Many Resources

  - by user3393046

  My Server has the following Specs CPU: 6 Cores Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz RAM: 32 GB I have a problem with nginx+php-fpm. They are taking too many resources for an unknown reason. Even if i restart the nginx + php-fpm the start up processes will use many resources. My nginx Config is the following: user nginx; worker_processes auto; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; worker_rlimit_nofile 300000; events { worker_connections 6000; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 65; #gzip on; include /etc/nginx/conf.d/*.conf; } My php-fpm pool config is the following [www] user = nginx group = nginx listen = /var/run/php5-fpm.sock listen.owner = nginx listen.group = nginx listen.allowed_clients = 127.0.0.1 pm = ondemand pm.max_children = 1500; pm.process_idle_timeout = 5; chdir = / security.limit_extensions = .php I'm using on pm.ondemand since my website has to support many concurrent connections at the same time and i was unable to to it with dynamic/static. I guess this isnt the problem because as i said earlier when i restart nginx+php-fpm at the same time, they are taking too much resources without any request. Here is the screenshot with the CPU Usage http://s28.postimg.org/v54q25zod/Untitled.png

  Read the article

• Exchange 2003 - how to route ALL mail (including internal) via an external SMTP gateway? (Or, domain

  - by Scandalon

  Short version: Is there a way to have Exchange route all email, including internal AD users that would normally be routed directly, through an external gateway? (SMTP, probably a "Smart Host" in exchange nomenclature.) Longer version: I'm not an email expert/admin/orevencompetent. Inherited an exchange 2003 server, migrating to web-based SaaS provider. To add to the fun, we're also (forced by deadlines) transitioning domains. What we (my boss) wants is any email sent to the new domain to have a copy sent to both domains. Getting mail sent to the new domain/provider to then be copied/forwarded to our old domain/exchange is easy. But we want mail sent from the old domain to the old domain to get sent to the new domain as well. However: If we route all outgoing exchange mail through the new provider gateway, w/ the new domain forwarding to the old, we'd get an email loop. The "solution" desired is for an exchange user that sends to another exchange user to still be sent via the external gateway, which would in turn be sent to the new domain, and copied/forwarded back to the old domain. Is it possible? A bit of a strange request I'm sure. And I expect that what we're attempting to do is DoingItWrong(tm). Any better ideas?

  Read the article

• Splunk is fantastically expensive: What are the alternatives?

  - by samsmith

  This has been discussed, but it has been several months, so it may be time to revisit it: Earlier discussion RE Splunk alternatives For the record, Splunk rocks. But the pricing is simply beyond what we can consider (When I spoke with Splunk today, the cost for a system to index 5gb/day of data is over $30,000.) That is more than we spend on SQL Server (by a large multiple), more than we spend on a rack of servers (by a multiple), etc. etc. The splunk sales team is correct (that for $30K we get more value and functionality than if we spend the same building our own system), but it doesn't matter. The splunk cost is simply too high (by a multiple). Soooooo, we are looking around! Is anyone out there building a splunk like system? Our basic need: Able to listen for syslog messages on multiple udp ports Able to index the incoming data in an async way Some kind of search engine Some kind of UI An API to the search engine (to embed in our console) We currently need to index 3-5gb/day, but need to be able to scale to 10gb/day or more. We do not need a lot of history (30 days is fine). We use Windows 2008 and 2003 servers. Thanks for your thoughts!

  Read the article

• checksecurity / setuid changes, is this a bug or did somebody break in?

  - by Fabian Zeindl

  I received a mail by checksecurity from my ubuntu 12.04 server with the following content: --- setuid.today 2012-06-03 06:48:09.892436281 +0200 +++ /var/log/setuid/setuid.new.tmp 2012-06-17 06:47:51.376597730 +0200 @@ -30,2 +30,2 @@ - 131904 4755 2 root root 71280 Wed May 16 07:23:08.0000000000 2012 ./usr/bin/sudo - 131904 4755 2 root root 71280 Wed May 16 07:23:08.0000000000 2012 ./usr/bin/sudoedit + 143967 4755 2 root root 71288 Fri Jun 1 05:53:44.0000000000 2012 ./usr/bin/sudo + 143967 4755 2 root root 71288 Fri Jun 1 05:53:44.0000000000 2012 ./usr/bin/sudoedit @@ -42 +42 @@ - 130507 666 1 root root 0 Sat Jun 2 18:04:57.0752979385 2012 ./var/spool/postfix/dev/urandom + 130507 666 1 root root 0 Mon Jun 11 08:47:16.0919802556 2012 ./var/spool/postfix/dev/urandom First i was worried, then i realized that the change was actually 2 weeks ago, i think there was a sudo-update back then. Since checksecurity runs in /etc/cron.daily i wondered why i only get that email now. I looked into /var/log/setuid/ and found the following files: total 32 -rw-r----- 1 root adm 816 Jun 17 06:47 setuid.changes -rw-r----- 1 root adm 228 Jun 3 06:48 setuid.changes.1.gz -rw-r----- 1 root adm 328 May 27 06:47 setuid.changes.2.gz -rw-r----- 1 root root 1248 May 20 06:47 setuid.changes.3.gz -rw-r----- 1 root adm 4473 Jun 17 06:47 setuid.today -rw-r----- 1 root adm 4473 Jun 3 06:48 setuid.yesterday The obvious thing that confuses me is that the file setuid.yesterday is not from yesterday = Jun/16. Is this a bug?

  Read the article

< Previous Page | 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930  | Next Page >