Search Results

Search found 57194 results on 2288 pages for 'windows'.

Page 1935/2288 | < Previous Page | 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942  | Next Page >

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have alot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• Recover an accidentaly closed Opera window after restarting Opera?

  - by Kostas

  Hello there and thanks for all the help! I accidentaly closed a window with multiple tabs in Opera. There was another window with a couple of tabs running. I have closed and restarted Opera in the hope it will retrieve the windows at startup (it usually asks if I want to continue from last time). Is there a way I can retrieve my closed window with all the tabs? I cannot see them in the history either, probably because When I switched-on my PC the Internet connection was down and the pages didn't load :-/

  Read the article

• How do I recover an accidentaly closed Opera window?

  - by Kostas

  Hello there and thanks for all the help! I accidentaly closed a window with multiple tabs in Opera. There was another window with a couple of tabs running. I have closed and restarted Opera in the hope it will retrieve the windows at startup (it usually asks if I want to continue from last time). Is there a way I can retrieve my closed window with all the tabs? I cannot see them in the history either, probably because When I switched-on my PC the Internet connection was down and the pages didn't load :-/

  Read the article

• touchscreen in dual monitors but not as primary

  - by bazzjedi

  Hi, I have been looking for information about using a second monitor but thought of using a touchscreen will a touchscreen monitor work in dual set up, but not set up as main monitor which is the question. Can't find any information on this only when others set it has main. only this piece If you mean do the touch screen features still work on the other machine, the answer is yes. Past that, you can even see some of the touch screen features on a non touch screen monitor (just not the multi touch features!) For example, on the taskbar, click (without releasing) on any icon and then drag the mouse up, and you will see that it does the same as using your finger and dragging up. link|flag answered Feb 5 '10 at 15:14 Wil 47.4k125 have hp 2510 main thinking of hp2310ti touchscreen as secondary, grafic card geforce gtx 295- windows 7 professional regards bazzjedi

  Read the article

• Failing RAM, or something else?

  - by Thanatos

  I have a IBM Thinkpad T43, currently running Windows XP. Programs were crashing, XP was blue-screen-of-deathing, (more than usual) - it was basically unusable, but I couldn't get any informative error out of XP. I booted Ubuntu off a thumbdrive, which made it to the desktop, but as soon as I started to try to do anything, X segfaulted, along with several other services, followed quickly by kernel warnings and a kernel panic. I'm currently running Memtest86+ on this machine, which is spitting out numerous errors. (16k over 3 passes, and counting) The failing areas are numerous, and look something like this: 0001055da4 - XX.X MB, etc. The addresses that fail seem to cluster around 0-20 MB, 250MB, and, more rarely, 750MB, 1000MB, and 1200MB. However, a lot (but not all) of the failing addresses that I've seen end in XXXXXXX?da4 where the ? is a 1 or a 5. The machine has two sticks of RAM, one 512MB, one 1024 MB, the 512MB mapped to the lower addresses, the 1024 MB stick following. Is this indeed RAM failure, or should I consider other things before purchasing more RAM?

  Read the article

• What are people using as Login scripts in large enterprises

  - by beakersoft

  Hi, We have recently been tasked with looking after the user login side of things in our enterprise (windows clients in active directory). We have a system at the moment that uses a vbscript login/loggof script to call a couple of DLL written in vb 6. The DLL's actions are controled by some config files based on users/groups witch is administrated from a central app. This is quite a good system, but kind of want to come away from vb6 for the dll's (maybe port them to c++ but them you have to make them com+ to call them from vbscripts etc) and possibly away from vbscript for the actual login scripts themselves. Just wondered what other people are using, what people can suggest etc Thanks Luke

  Read the article

• Accessing localhost:8080 through local network

  - by Theron Luhn

  I'm developing a Python WSGI website. I'm running a Paste development server on my Mac (OS X 10.7) on port 8080. I want to test the website on some other devices and OSs I have connected to the local network (Windows 7 VM, iPad, iPhone, etc.), but am having trouble. I turned on Web Sharing, and am able to access that (port 80) without a problem on all my devices. Port 8080 still doesn't work. An excerpt from my Paste configuration: [server:main] use = egg:waitress#main host = 127.0.0.1 port = 8080 The OS X firewall (Settings - Security - Firewall) is off. I have no other firewall software installed. My network is through a Linksys WRT160N router. I haven't done much with the settings, so most of them are at their defaults. I've been Googling all morning, but can't find a solution.

  Read the article

• Alternate Client for Cisco Unified Personal Communicator protocol

  - by Jason M

  At work we have an in-house chat system using CUPC. Does anyone else out there use this? There are a few things I do not like about this client: Where's the chat log? If I close the window, I have no way of getting my conversation back. Tabbed interface? That would be nice. I hate having multiple chat windows up, having to arrange them around my desktop as more people start talking to me. I don't like that I have to use this one-off application for particular this protocol when other chat clients will handle 99% of the other protocols I use. Tell me: Is the protocol an open standard for which other applications have support? (pidgin, adium, digsby, etc.) If not, can I overcome these issues from within CUPC? Perhaps there are newer versions of the client that overcome these issues.

  Read the article

• Two users using the same same user profile while not in a domain.

  - by Scott Chamberlain

  I have a windows server 2003 acting as a terminal server, this computer is not a member of any domain. We demo our product on the server by creating a user account. The person logs in uses the demo for a few weeks and when they are done we delete the user account. However every time we do this it creates a new folder in C:\Documents and Settings\. I know with domains you can have many users point at one profile and make it read only so all changes are dumped afterwords, but is there a way to do that when the machine is not on a domain? I would really like it if I didn't have to remote in and clean up the folders every time.

  Read the article

• System Lags/Freezes when under high usgage

  - by tom

  I am not sure if its my GPU / Memory or Hard drive thats failing. For example if I'm runnning more than one instance of chrome and running an application that takes up a lot of resources, my system will start to lag and freeze. When I launch Photoshop the GPU feature disables automatically, this also lags when I click on menus and when working on documents in Photoshop. I really dont know where to start, if i should buy a new graphics card or test the memory or could it be my OS drive? System: Windows 7 64bit, ATI Raedeon 5850, Corsair 2x4GB http://i.stack.imgur.com/qqkLZ.jpg

  Read the article

• Exchange Server 2003 Drive Error

  - by Saif Khan

  My exchange box went offline this AM. The logs show The device, \Device\Harddisk1, has a bad block. I tried running chkdsk D: /x /r but that didn't help either. I went to the Exchange Manager and tried to move the .stm file from D: to C: but got Exchange System Manager The database files in this store are corrupted. ID no: c104173b Exchange System Manager What else is there to try just to get this online for a few hours until I can get onsite to change the drive. This is a Windows Server 2003 server.

  Read the article

• Outlook 2010 reminders keep popping up even if closed

  - by LapplandsCohan

  Today when I got to work and started my computers I got a event reminder for my last events last friday. I closed the reminder, but perhaps 10 minutes later it pops up again, and another 10 minutes later it popped up yet again. As the day is passing all my reminders for this day is added to the list of reminders that keep popping up 10 minutes after that they are closed. I've tried both the repair function in Windows Control Panel -- E-mail and the scanpst.exe program, but none of them solved the problem. I've tried outlook.exe /cleansniff and outlook.exe /cleanreminders, but that didn't help either. Reading on the net there seem to be some reports with this for reoccuring calendar events, but my affected events are one-timers. How can I get the closed reminders to stay closed? Update: I noticed that I have 282 drafts of the meetings that I keep getting reminders of.

  Read the article

• Intermittent graphics issue

  - by Rob

  An older (~3 year old) PC I have passed on to my younger brother has a Sony 17" LCD monitor and uses on-board Intel GMA 3100 graphics (supports Aero under Windows 7 and no more is required). Recently he has complained to me twice that after booting up the screen looks all 'fuzzy'. Initially I thought maybe he messed up the ClearType settings by mistake, but resetting that did nothing. The only thing that finally worked was changing the resolution to something else temporarily, then setting it back to the original native (highest supported) resolution. The second time this happened the same 'fix' worked. This is happening only intermittently as of now and is not predictable/reproducible. I suspect either the monitor or on-board graphics is dying. How can I check and confirm which of the two it is (or maybe something else you guys can think of)? If it's the on-board graphics, would I be able to keep using the same motherboard with the addition of a cheap PCI-E graphics card?

  Read the article

• SharePoint Returning a 401.1 for a Specific User/Computer

  - by Joe Gennari

  We have a SharePoint Services 3.0 site set up supporting about 300 users right now. This report is isolated and has never been duplicated. We have one AD user who cannot log into the SharePoint site with his account from his machine and is subsequently returned a 401.1 error. If any other user tries to log on with their account from his machine, it works okay. If he moves to another machine and logs on, it works okay. The only solution to this point has been to install FireFox on the machine. When he authenticates with FF, everything is okay. Remedies tried so far: Cleared cookies/cache Turned off/on Integrated Windows Authentication in IE Downgraded IE 8 to IE 6 Removed site from Intranet Sites zone Renamed the machine Disjoined/Rejoined Domain

  Read the article

• Upload large database SQL file

  - by Devy

  I've a database of more than 20Gb of size on my hard disk. What is the best way to upload it with the least (money) load possible on the server? - I'm on Windows 7. - I have FTP and SSH access on the server. I avoid using FTP because my connection cuts off a lot, I can't imagine I re-upload again the file after failing on 99%. I found some tools that split the large .sql file to small .sql files, but they didn't mention how to gather these files again into one file. Another way is to archive the big .sql file to .rar with -v option, upload them through FTP then unpack them. But unpacking will also cost, right? I know it will cost in any cases, but any best practice will be strongly appreciated.

  Read the article

• Tool to launch a script driven by modem activity

  - by Will M

  Can anyone suggest a software tool (preferably under Windows XP or later) that would launch an application or script in response to a phone call being received on a landline phone line connected to a data modem on the same PC? or, better, in response to a sequence of touch-tones being played over such a phone line. This would allow, for example, using the telephone to manipulate firewall settings so as to create another layer of security in connection with remote internet access to that computer. I seem to recall seeing tools to do this sort of thing in the days before broadband internet access, when there was more attention to various tips and tricks for the dial-up modem, but a few attempts at Google hasn't turned anything up.

  Read the article

• List and kill running processes on Mac OS in Ctrl/Alt/Delete-like way?

  - by AP257

  So, what do you do on a Mac when a process (as opposed to an application) is hogging CPU, swamping your machine, and you need to kill it? I know you can use top or open Applications > Utilities > Activity Monitor and kill it from there. But what happens when the process is already using so much CPU that doing either of those tasks is impossible? On Windows, you can just do Ctrl/Alt/Delete and the process list will reliably open. So no matter how much your computer is thrashing, you always have access to the list of processes. On Mac OS, there's Cmd/Alt/Escape, which reliably shows running applications. Fine when it's an application causing the problem. But: what do you do if it's a process?

  Read the article

• How do I install the vi text editor ONLY on my Cygwin installation?

  - by gath

  I have managed to install the Cygwin on my Windows Vista machine. I installed using the default settings. When I try to do vi in the Bash shell, Bash tells me command not found. I believe I need to install the Cygwin editors package which include the vi editor. The nightmare is every time I run the Cygwin setup and select ONLY the editors package and specifically the Vim and select install, Cygwin setup tries to install all other packages, very frustrating!! Is there an easier way of installing just a single package using the Cygwin setup utility?

  Read the article

• Small 64-bit linux server distro with low memory footprint?

  - by djangofan

  I am looking for a linux server distro with a low memory footprint. I usually use Ubuntu but I need something with a smaller footprint in order to run a large Java JVM service inside of it and also run X-windows. Any ideas? The Java service needs to handle a 3GB memory heap and so I require a 64-bit OS and JRE. http://en.wikipedia.org/wiki/Comparison%5Fof%5FLinux%5Fdistributions I am thinking that ArchLinux is the only one that I can find right now. It uses 250MB out of the box (without X-win). Any better suggestions?

  Read the article

• Will SSD degrade when running VMWare Workstation from SSD?

  - by Andrey Botalov

  My main OS (Windows 7 or 8) is runned from SSD. I'd want to run Mac OS X 10.7 or 10.8 using VMWare workstation. I've heard that VMWare doesn't support TRIM and other things to optimize SSD usage. So SSD will quickly degrade if VM will be runned from SSD. Will it be better to put guest OS's files (.vmdk and the rest) to external HDD (connected through USB 2 or 3) instead of SSD? What advantages and disadvantages it will give? What if VM will be put to internal HDD? At what drive type performance of VM will be better?

  Read the article

• Gitosis installation of public key not working...

  - by user29600

  I've been following this tutorial to install and setup git on Ubuntu Server 10.04 using Windows 7 as a client. However, after finally figuring out how it works (executed gitosis-init a bunch of times on the wrong key), I copied the id_rsa.pub file over to the server in /tmp folder and ran it again. Unfortunately it still doesn't work and when I execute git clone [email protected]:gitosis-admin.git it asks for gitosis's password rather than the RSA Passphrase. I'm assuming is the same problem this guy is having here... however, after following his instructions: Purge git-core and gitosis and manually remove the /srv/gitosis folder and following the instructions again (with the proper id_rsa.pub file this time), I'm still having the same issue. Anyone know what I'm doing wrong? Is there any way to probe for more information that might help in solving this?

  Read the article

• How to run a process and completely detach it of its parent shell

  - by Bicou

  I'm running a program on a linux server that will take days to complete. I'm launching it from my workstation from an SSH terminal, as this program is command-line only. I want to be able to do all of these : launch that program, redirect standard outputs to files, exit my SSH session without making this terminate the process. I thought about $ ./MyProg.csh -params -foo -bar </dev/null 1>~/out.log 2>~/err.log & However, the process is terminated the moment I close my SSH session. My workstation is running Windows XP, and I cannot guarantee its uptime over several days, which is required for the processing of my data on the Linux server. As you may have noted, my program requires to be launched from CSH. Is it possible to do this ? Thanks.

  Read the article

• Running a VM off of an external HD via USB

  - by Nelson LaQuet

  Is it viable to run (i.e. reference the vmx/vhd directly from the mounted drive) a VM (vmware running Windows Seven) off of an external HD via USB? I mean, I know it's possible, but I guess I'm asking if USB provides enough bandwidth for normal usage... If so, are there any particular brands that may be better or worse? I know that ESATA would be a more viable setup, but my laptop doesn't have an ESATA port. Currently I use the VM to segregate all of my work development servers and software from my main machine; so I will be running all development servers and tools on the VM directly.

  Read the article

• Steps to install solely ubuntu 13.04 on Dell inspiron 14z ultrabook with SSD+HDD

  - by rishy

  I have tried a few things like disabling the Intel smart response, choosing AHCI in BIOS. But there are certain problems I am still facing. I can't see my SSD during the installation of ubuntu (I am planning to install Ubuntu on my SSD and other files on HDD). When I run Ubuntu my laptop gets overheated and battery backup reduces to 90 minutes. (I guess it's related to my graphic driver ATI Raedon HD 7570). Cooling fan seems to run at its fullest, it was working much better in windows. So, overall I wanted to know what are the exact steps I need to follow to install Ubuntu on my SSD and then use my HDD to keep other files, How can I get rid of overheating and battery backup problem?

  Read the article

• VMware player suspends on screensaver

  - by Chad

  I have this problem with my VMWare player. When my host operating system either goes into screen saver or I lock the work station with Windows Key + L. VMWare player pauses or halts everything. So when i come back to the computer and there is a background task working inside the virtual machine it does not progress until i've actualy loged back on. Is there any way to stop this behaviour with VMWare player and keep it running in the background even when the screen saver or the work station is locked? Version of VMWare is: 3.0.0 build-203739

  Read the article

< Previous Page | 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942  | Next Page >