Search Results

Search found 16417 results on 657 pages for 'computer linguist'.

Page 194/657 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

  • Hyper-V management remotely

    - by Péter
    I'll tell you in advance that I'm newbie in the topic. I have a Win8 (Home) machine with Hyper-V installed behind a router. The router has a public IP and a domain attached. I have another Win8 (Work) machine also installed Hyper-V. I want to access to my home Hyper-V via Hyper-V Manager so I can manage my virtual machines from work. I found this article but I don't know if it's applicable to me. I thought that a simple port forwarding should work and I only need to do is grant the Work HV manager my domain and the port I choose and if it's pop a login form I only need to fill the user data of my Home computer? How can I solve this? My thoughts revolve around: - Port forwarding - set domain+port and set my home user - Set up a VPN and use the local ip address of my home computer (it looks like a little cumbersome and my router only support PPTP) I'm open to any other solution too. Thanks, Péter

    Read the article

  • Can't save screen resolution setting.

    - by Searock
    Hi, My screen resolution in windows and previous version of Ubuntu (9.04) was 1152 x 864. But in Ubuntu 10.04 it gives me an option of 1024 x 786 and 1360 x 786. I have some how managed to add 1152x684 resolution by using xrandr command. searock@searock-desktop:~$ cvt 1152 864 1152x864 59.96 Hz (CVT 1.00M3) hsync: 53.78 kHz; pclk: 81.75 MHz Modeline "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync searock@searock-desktop:~$ xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync searock@searock-desktop:~$ xrandr --addmode S-video 1152x864 xrandr: cannot find output "S-video" searock@searock-desktop:~$ xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1360x768 59.8 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 59.9 1152x864_60.00 (0x124) 81.0MHz h: width 1152 start 1216 end 1336 total 1520 skew 0 clock 53.3KHz v: height 864 start 867 end 871 total 897 clock 59.4Hz searock@searock-desktop:~$ xrandr --addmode VGA1 1152x864_60.00 But the problem is when ever I restart my computer I get this message. Could not apply the stored configuration for the monitors. Could not find a suitable configuration of screens. And then it comes back to 1024 x 786 My graphic card details : Intel(R) 82945G Express Chipset Family. Is there any way I can fix this once for all ? Thanks. Edit 1 : rumtscho has suggested me to modify xorg.conf file. But I am not sure what HorizSync means? is it Horizontal frequency ? My monitor model is Acer v173. Here's my specification. So what should be HorizSync and VertRefresh ? Edit 2 : I have edited my Xorg.conf file as follows : Section "Monitor" Identifier "Configured Monitor" HorizSync 30-80 VertRefresh 55-75 EndSection then I added the resolution and restarted my computer and still I am facing the same problem. Is there something that I am missing? Edit 3 : For now I have edited /etc/gdm/Init/Default(gdm startup scripts) to include following xrandr commands, just below line initctl -q emit login-session-start DISPLAY_MANAGER=gdm xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync xrandr --addmode VGA1 1152x864_60.00<br/> xrandr -s 1152x864_60.00 This has solved my problem, but this commands have increased my computer's boot time. I think I will have to edit xorg file properly. Edit 4 : Instead of adding this files to gdm startup scripts I have created a shell script and added it to startup (System - Preference - Startup Applications) #!/bin/bash xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync xrandr --addmode VGA1 1152x864_60.00 xrandr -s 1152x864_60.00 And don't forget to add execution rights. (Right Click - Properties - Permission - Allow executing file as program)

    Read the article

  • Selected wrong OS from bootloader settings and now can't do anything

    - by Eric
    I'm trying to help a friend out with an urgent issue he is having. He has two Windows 7 installations when he was starting up his computer so the bootloader menu was making him select an OS every time he restarted. One installation is functional and the other is not. He wanted to make it so that he did not have to select the correct OS every time he booted up. He chose the wrong (non-functional) operating system in the windows settings and set the time to select an operating system int he bootloader menu to 0 seconds. Now, his computer attempts to boot into a non-working operating system and he has no way of selecting the correct operating system so that he can fix his mistake. What can he do to get into the functional OS so that he can fix his mistake? Thanks so much.

    Read the article

  • How to retain secondary hard drive mounts at reboot and keep shares?

    - by Tom
    I'm running Ubuntu 12.04. A second hard drive connected to this computer does not mount when the computer boots. Additionally, I have set up the drive to be shared but the share is not retained, the share is lost after each boot. My main system drive and a removable drive mount OK and shares remain between boots. Additional information follows: D2Linux sda1 is the secondary hard drive L-Freeagent sdc1 is the removeable drive Here is the contents of fstab immediately after booting (D2Linux /dev/sda1 not yet mounted): '# /etc/fstab: static file system information. ' '# ' '# Use 'blkid' to print the universally unique identifier for a ' '# device; this may be used with UUID= as a more robust way to name devices ' '# that works even if disks are added and removed. See fstab(5). ' '# ' '# ' proc /proc proc nodev,noexec,nosuid 0 0 '# / was on /dev/sdb1 during installation ' UUID=43d29a82-66b3-40f3-91ed-735a27a60004 / ext4 errors=remount-ro 0 1 '# swap was on /dev/sdb5 during installation UUID=cf8e3351-11d0-487a-8a6e-e499c2e88a10 none swap sw ' 0 0 Here is the output of mount with all drives mounted (I did not restore the share): /dev/sdb1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/tom/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tom) /dev/sdc1 on /media/L-Freeagent type ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sda1 on /media/D2Linux type ext4 (rw,nosuid,nodev,uhelper=udisks) Thank you!

    Read the article

  • Multicast hostname lookups on OSX

    - by KARASZI István
    I have a problem with hostname lookups on my OSX computer. According to Apple's HK3473 document it says for v10.6: Host names that contain only one label in addition to local, for example "My-Computer.local", are resolved using Multicast DNS (Bonjour) by default. Host names that contain two or more labels in addition to local, for example "server.domain.local", are resolved using a DNS server by default. Which is not true as my testing. If I try to open a connection on my local computer to a remote port: telnet example.domain.local 22 then it will lookup the IP address with multicast DNS next to the A and AAAA lookups. This causes a two seconds lookup timeout on every lookup. Which is a lot! When I try with IPv4 only then it won't use the multicast queries to fetch the remote address just the simple A queries. telnet -4 example.domain.local 22 When I try with IPv6 only: telnet -6 example.domain.local 22 then it will lookup with multicast DNS and AAAA again, and the 2 seconds timeout delay occurs again. I've tried to create a resolver entry to my /etc/resolver/domain.local, and /etc/resolver/local.1, but none of them was working. Is there any way to disable this multicast lookups for the "two or more label addition to local" domains, or simply disable it for the selected subdomain (domain.local)? Thank you! Update #1 Thanks @mralexgray for the scutil --dns command, now I can see my domain in the list, but it's late in the order: DNS configuration resolver #1 domain : adverticum.lan nameserver[0] : 192.168.1.1 order : 200000 resolver #2 domain : local options : mdns timeout : 2 order : 300000 resolver #3 domain : 254.169.in-addr.arpa options : mdns timeout : 2 order : 300200 resolver #4 domain : 8.e.f.ip6.arpa options : mdns timeout : 2 order : 300400 resolver #5 domain : 9.e.f.ip6.arpa options : mdns timeout : 2 order : 300600 resolver #6 domain : a.e.f.ip6.arpa options : mdns timeout : 2 order : 300800 resolver #7 domain : b.e.f.ip6.arpa options : mdns timeout : 2 order : 301000 resolver #8 domain : domain.local nameserver[0] : 192.168.1.1 order : 200001 Maybe it would work if I could move the resolver #8 to the position #2. Update #2 No probably won't work because the local DNS server on 192.168.1.1 answering for domain.local requests and it's before the mDNS (resolver #2). Update #3 I could decrease the mDNS timeout in /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist file, which speeds up the lookups a little, but this is not the solution.

    Read the article

  • Rhythmbox - put a playlist on my iPod

    - by GorillaSandwich
    I have an old iPod nano and currently use iTunes in Windows to management. However, I'm trying to switch to Ubuntu. So far, iPod management is one major holdup. Besides being unable to easily manage podcasts, I also don't see a way to create a playlist and put it on my iPod. I can create a playlist on the computer in Rhythmbox, but I can't drag and drop it onto the iPod. I can create a playlist on the iPod itself, put I can't drag and drop songs from my library into it. If I right-click the songs, I can add them to playlists on the computer, but not on the iPod. How can I create a playlist of music in Rhythmbox and sync it to my iPod?

    Read the article

  • Does anyone still use Iometer?

    - by Brian T Hannan
    "Iometer is an I/O subsystem measurement and characterization tool for single and clustered systems. It is used as a benchmark and troubleshooting tool and is easily configured to replicate the behaviour of many popular applications." link text Does anyone still use this tool? It seems helpful, but I'm not sure if it's for the thing I am trying to work on. I am trying create a benchmark computer performance test that can be run before and after a Windows Optimization program does its stuff (ex: PC Optimizer Pro or CCleaner). I want to be able to make a quick statement like CCleaner makes the computer run 50% faster or something along those lines. Are there any newer tools like this one?

    Read the article

  • How to maximise performance in computers connected into LAN via Gigabit ethernet router?

    - by penyuan
    Our group is setting up a server (which might just be a NAS, but we're not sure yet), which shares files, so that it connects to all other computers in the room (about 10 of them). I am thinking just hooking all of them up via a gigabit router/switch. Is there anything I should watch out for, in terms of cables, connections, or the connection capabilities of each computer in the network? For instance, I don't want a slow computer in the LAN to slow down everyone else's connection, etc., etc. Thanks for the education.

    Read the article

  • Do you know of an online back up & sync solution for Windows that actually works?

    - by Hermann
    I've been looking for some time for a program that backups your data to the cloud and is also able to sync 2 or more computers. By syncing I mean, if I change something on one computer that it should also apply the same change on another computer. I've tried two solutions so far which looked good initially but ultimately failed because they were buggy or simply don't work, or both. Syncplicity has messed up my file structure several times and they don't fix fix bugs that are literally over a year old. I then switched to SpiderOak which looked promising but ultimately had the same problems. Messed up my file structure several times, sometimes sync simply doesn't work, it's extremely inefficient and they keep pushing out releases were they say they fixed the sync bugs I reported but they did't. Does anyone of you know of an online sync solution that actually works?

    Read the article

  • Windows7 access to Printer shared with XP ?

    - by chmike
    I have, at home, an eeebox running with XP 24/24 with an attached printer (Canon IP5300) installed as shared. We have a few other laptops and PC, all with vista, that can access and print on the shared printer without problem. We just received a new Dell computer with Windows7-64 on it, but it fails to connect the shared printer. I tried connecting the printer with its USB cord directly to the Windows7 PC and the required driver was automatically downloaded and installed. I could then access the printer specific properties, etc. But if I connect it back to the XP computer, the windows7 PC still refused to connect to the remote printer although it now have the drivers. The windows7 is a family pack. By the way, I also have an old canon scanner still perfectly working with XP, but for which I can't find compatible drivers for windows 7. Do I have to buy a new one ? Any help would be welcome.

    Read the article

  • Ubuntu 12.04 LTS won't install - never finishes please help

    - by Richard Higgins
    Want to try Ubuntu after using Windows for 30 years. Tried to install it 5 times on a Lenovo X120e notebook and twice on a Lenovo M57 desktop. No luck, worse than what Microsoft puts you through. I burned 12.04 LTS to disc. It installs up to the "Who Are You?" screen, then stops. Accepted the recommended computer name and lower case user name. I chose "log me in automatically." After that there is no progress bar, no rotating or pulsing button, nothing to indicate the Ubuntu has not died or fallen asleep. Is that how it is written? Never heard of a program that would take a long time to install while a user looked at a locked, dead screen. I just bought the M57 desktop for my son. It came with Ubuntu 10 something. I wanted to upgrade to 12.04 but it crashed, twice, to a DOS screen saying the pc lacked a certain "init" file. Various help screen commands did not help. On the X120e, I thought a partial-failed Ubuntu install was causing the problem, so I removed the drive and deleted the Ubuntu partition and replaced it. But same result. After I fill in my name, accept computer and user name, the "continue" button does not appear to work. I can go "back" but not forward. I have waited torturous hours. It doesn't take more than two hours to install, does it?any It is my own fault because of the high expectations I had for a sensible, hassle-free installation, but I am immensely disappointed. Thank you for any response

    Read the article

  • Shooter in iOS and a visible Aim line before shooting

    - by London2423
    I have to questions. I am trying to develop a game that is iOS but I did it first in my computer so I can tested there. I was able to must of it for PC but I am having a very hard time with iOS port The problem I do have is that I don't know how to shout in iOS. To be more specific how to line render in iOS This is the script I use in my computer using UnityEngine; using System.Collections; public class NewBehaviourScript : MonoBehaviour { LineRenderer line; void Start () { line = gameObject.GetComponent<LineRenderer>(); line.enabled = false; } void Update () { if (Input.GetButtonDown ("Fire1")) { StopCoroutine ("FireLaser"); StartCoroutine ("FireLaser"); } } IEnumerator FireLaser () { line.enabled = true; while (Input.GetButton("Fire1")) { Ray ray = new Ray(transform.position, transform.forward); RaycastHit hit; line.SetPosition (0, ray.origin); if (Physics.Raycast (ray, out hit,100)) { line.SetPosition(1,hit.point); if (hit.rigidbody) { hit.rigidbody.AddForceAtPosition(transform.forward * 5, hit.point); } } else line.SetPosition (1, ray.GetPoint (100)); yield return null; } line.enabled = false; { } } } Which part I have to change for iOS? I already did in the iOS the touch giu event so my player move around in the xcode/Iphone but I need some help with the shouting part. The second part of the question is where I do have to insert or change the script in order to first aim and I DO see the line of aim and then shout. Now the player can only shout. It can not aim at the gameobject, see the the line coming out of the gun aiming at the object and then shout? How I can do that. Everyone tell me Line render but that's what i did Thank you

    Read the article

  • Windows file sharing connects over WiFi instead of LAN

    - by zacaj
    I have a laptop and a desktop computer, and I need to sync lots of files to the laptop and back whenever I go on a trip, etc. I've got a LAN cable connected into an extra port on the desktop that I plug into the laptop so I can get gigabit file transfers instead of wireless G. They connect fine. If I do an FTP transfer, for instance, using the LAN IP addresses, it goes at ~40MB/s, as it should. However when I copy files using explorer and native windows file sharing it detects the other computer by name, not IP (eg \\DESKTOP-PC\ instead of \\192.168.0.100\) and always connects to it by its wireless IP address instead of the faster LAN address. Both computers are running Windows 7. I have tried editing the priorities of the adapters in Advanced Settings and putting the LAN adapters above the wifi ones, but this didn't have any effect

    Read the article

  • Server 2008 Likes to restart itself

    - by Campo
    I have a weird issue here. I notice about once a week the web server restarts itself. This would be only a minor issue if we were not planning on implementing an IP failover. I have checked the event logs. I don't see anything that indicates a reason for the restart. I need some help diagnosing the reason the server restarts. It happened last night at 5:00AM Last even in the log was 1 hour before the unexpected shutdown. Here is the Log for the shutdown event. Any help is much appreciated. I know there isn't much to go on yet. Log Name: System Source: EventLog Date: 5/5/2010 5:01:12 AM Event ID: 6008 Task Category: None Level: Error Keywords: Classic User: N/A Computer: SERVERNAME Description: The previous system shutdown at 4:56:41 AM on 5/5/2010 was unexpected. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="EventLog" /> <EventID Qualifiers="32768">6008</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-05-05T09:01:12.000Z" /> <EventRecordID>346094</EventRecordID> <Channel>System</Channel> <Computer>SERVERNAME</Computer> <Security /> </System> <EventData> <Data>4:56:41 AM</Data> <Data>5/5/2010</Data> <Data> </Data> <Data> </Data> <Data>39594</Data> <Data> </Data> <Data> </Data> <Binary>DA070500030005000400380029008E03DA070500030005000800380029008E033C0000003C000000000 000000000000000000000000000000100000000000000</Binary> </EventData> </Event>

    Read the article

  • Sharing internet connection from Windows XP using wi-fi router

    - by Darius
    Hi, I have an network configuration like: Ethernet cable from ISP connected to Windows XP machine, configured with static IP 192.168.0.3 Another ethernet connection from 2nd Windows XP machine's network adapter to a Wi-Fi router (D-Link Airport G+) XP set to "Share internet connection", the 2nd adapter configured as static to 192.169.0.1 D-Link Airport Wi-Fi router also configured as "static connection", it's IP set to 192.169.0.2, default gateway set to 192.169.0.1. Network mask everywhere is 24. Laptop computer connected with the router with static IP 192.169.0.3 The problems are: XP machine sees the router (it's able to ping it and access it via the web admin tool) The router somehow cannot PING the XP machine (using the tool provided by the web-based admin tool) The laptop computer cannot ping anything and cannot be pinged The router is only accessible when the ethernet cable is connected with a router's 1-4 LAN port, when I connect it via "WAN" port (which I believe is the proper one) it's not visible from the XP machine If you have similar experience with configuring a network like this I would really appreciate your help. I cannot use the Wi-Fi router with the ISP cable itself.

    Read the article

  • Risk to native OS from Live CD?

    - by Frost Shadow
    Will booting from a Live CD (I was thinking Anonym OS) have any risk to the native OS? I wanted to try it out on my school´s computer, but I´d rather not have to explain why I accidentally reformatted the HD and deleted everything.. I know once you´ve booted the right way, it shouldn´t leave any trace on the HD, but is it possible I can push some wrong button and end up trying to overwrite the native with the Live OS? Also, since the computer itself is connected to the internet, will the network administrator be able to see that i´ve booted from a Live CD? I´m thinking yes, but just thought I´d check. Thanks for any help!

    Read the article

  • MacBook Refuses to Boot

    - by pas09
    I have a MacBook that has unfortunately died on me. I randomly got a pop up message that said I needed to restart my computer, and once I did, I was greeted with the blinking folder question mark start up screen. I've tried everything, including running Disk Utility repair and reformatting the hard drive and reinstalling OS X. All of my data is backed up and safe, I just need my computer to start again. Before I go off and buy a new hard drive, I wanted to see if there is anything I might have forgotten.

    Read the article

  • Ubuntu 13.04 to 13.10: Filesystem check or mount failed

    - by SamHuckaby
    I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

    Read the article

  • Connecting to a VirtualBox machine from the host, using an ip address

    - by Doron
    Hello, In a macbook host, I run VirtualBox having a guest ubuntu server, with a NAT network setting. In the virtual machine application "Parallels", I would get on the host an IP address of the guest, to which I could later set hostnames and access it directly. However, I couldn't find a way to accomplish this using VirtualBox. The only solution VirtualBox has for me, is to set port forwarding, and access "localhost" with these ports. How can I have the desired behavior set up, without having to change to a bridged network settings, and expose my guest computer to the network my host computer is connected to ? Thanks.

    Read the article

  • Can't bring NAT to work

    - by user31738
    Hello, I bought a D-link DIR-300 wireless router and i can't bring NAT to work, i have an ssh and http service i need to forward to the internet. My connection is as follows: I have an ADSL connection, i'm using a ADSL ethernet modem connected and working, it doesnt let me put it on bridge mode. I have my router connected to my adsl modem through ethernet, it gets its ip through DHCP (and i'ts always the same) I have a desktop computer running linux with apache and openssh configured and working, it has fixed ip. I configured the NAT in the modem forwarding port 22 from the router ip to the internet. In the router i setup NAT forwarding port 22 from the desktop computer fixed ip to out there. This setup already worked with a fonera i had before, can anyone help me with this or tell me what kind of tests do i need to do? How can i test if the router is forwarding ports correctly before the modem?

    Read the article

  • What do encrypted files' data look like?

    - by Frost Shadow
    I know there are a lot of encryption programs available, that I would guess use different methods for encryption, and thus have different types of output files (.fve .tc .cha .dmg (bitlocker, truecrypt, challenger, ect.)), but if someone didn't know what the file was and just looked at the data, what would it look like? Does it just look like random bits, or can you still pick out a pattern? If it does look random, how is it if I moved the encrypted file to another computer, the other computer can tell it's a file, and is able to decrypt it (how would it even know where to start or stop, if it all looked random)? Also, how is the structure affected by encrypting files twice, using the same method, or a different one? Thanks for any help, and if you know any books or site about encryption for complete idiots, I'd appreciate it!

    Read the article

  • How are SQL Server CALs counted?

    - by Sam
    Running a SQL Server, as far as I understand it, you need one CAL for every user who connects to the database server. But what happens if the only computer which is accessing the SQL Server is the server running your business layer? If, for example, you got 1 SQL Server and 1 Business logic server, and 100 Clients who all just query and use the business logic server. No client is using the SQL Server directly, no one is even allowed to contact it. So, since there is only one computer using the SQL server, do I need only 1 CAL??? I somehow can't believe this would count as only 1 CAL needed for the SQL Server, but I would like to know why not.

    Read the article

  • Adding MX records to DNS

    - by Teddy
    Let's say I have a computer A which is running postfix, computer B is running tinydns. On domain project.domain.com I'm running httpd server and other server with DNS (tinydns) have entries like =project.domain.com:1.2.3.4:86400 and +project.domain.com:1.2.3.4:86400 where 1.2.3.4 is correct addres for server which runs httpd server. I also have a postfix mail server on 1.2.3.5 which I'd like to work with this domain (project.domain.com). I'm afraid that if I add another alias like +project.domain.com:1.2.3.5:86400 to tinydns configuration - it could break. How that entry should look like? Thank you for any hints.

    Read the article

  • Security of BitLocker with no PIN from WinPE?

    - by Scott Bussinger
    Say you have a computer with the system drive encrypted by BitLocker and you're not using a PIN so the computer will boot up unattended. What happens if an attacker boots the system up into the Windows Preinstallation Environment? Will they have access to the encrypted drive? Does it change if you have a TPM vs. using only a USB startup key? What I'm trying to determine is whether the TPM / USB startup key is usable without booting from the original operating system. In other words, if you're using a USB startup key and the machine is rebooted normally then the data would still be protected unless an attacker was able to log in. But what if the hacker just boots the server into a Windows Preinstallation Environment with the USB startup key plugged in? Would they then have access to the data? Or would that require the recovery key? Ideally the recovery key would be required when booted like this, but I haven't seen this documented anywhere.

    Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >