Search Results

Search found 7756 results on 311 pages for 'hardware acceleration'.

Page 194/311 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

• IP KVM switch, or serial console box for remote admin?

  - by grahzny

  We have a small server farm (11 now, may add more in the future) of HP Proliant DL160 G6s. They all run either Linux (server only, no X11) or VMware ESX. We had intended to get models with iLO, in case BIOS-level remote admin became an issue, but that didn't happen. I had an IP KVM switch recommended to me (along with some sort of Remote Reboot hardware.) I've since realized that none of our machines need GUI administration, so perhaps a serial console switch would be a cheaper and more appropriate option. Something like this: http://www.kvm-switches-online.com/serimux-cs-32.html Do you folks have an opinions on which way is a better choice? Should we go for the ease of setup (plug and go, instead of turning on the feature in the BIOS and making sure the serial settings are correct) and the flexibility of an IP KVM switch even with the extra cost? Or is a serial console switch just fine?

  Read the article

• How do I set up a shared internet on a network using computer hooked up to a router

  - by Skadlig

  I got a wireless broadband modem (Huawei E1750) hooked up to my computer (call it A., running Windows-7) whose internet I wish to share to my other computer (call it B., also running Windows-7). A. is hooked up to my d-link DIR-600 router using a wired connection to port 1 on the router. B. is connected to the router using a wireless connection. Now I have tried setting up the sharing according to the help files for ICS but I have not been able to get it working. I suspect that there is something in my hardware configuration that is making it difficult. I would appreciate some tips and pointers as to what could be the reason to my problems.

  Read the article

• What are the best options for a root filesystem hosted on SSD under Linux

  - by stsquad

  I'm working on an embedded system which is going to be booting and hosting it's rootfs on an SSD disk. We are currently looking at using Intel X-18M SSDs. The file system structure will have a fairly static /usr section (modulo software upgrades) and an active /var and /var/log for maintaining state and logging. Given the wear-levelling done by the underlying flash does having separate partitions help or hinder? As modern SSDs appear as straight block devices and hide their mapping magic behind their firmware is there any point trying to optimise the choice of file-system that sits on-top of the SSD? Finally does enable SMART monitoring make any sense in this context or are their SSD specific ways of determining the underlying health of the storage hardware?

  Read the article

• Windows 7 Via Hyperion 4-1 drivers

  - by Gratzy

  I have a clean install of Win 7 on some relatively old hardware. Everything works pretty well however my cpu is pegged at 100% most of the time. Task Manager shows srvchost as being a main culprit of course but also system interrupts. I have a Biostar socket 478 MB with Via chipset. I have tried to find Windows 7 drivers for this but when I download and try to install what VIA/BIOSTAR say should be good for all OS's it will not load. I get a message saying can't find components for this OS. Anybody have any idea where I might find suitable drivers for the Chipset? BTW I'm not using the integrated graphics on the board but have a radeon 4500 pci-e card.

  Read the article

• Slow old notebook Hardy => Karmic

  - by Mailo

  Hi, i have one very slow notebook from year about 2000. On the computer is running icewm with firefox (in this times chromium for testing). My question is if it's good step to upgrade the system to Karmic Koala? I can't install another OS on that. It doesn't have CD-ROM, it can't boot from flash, or network. The new wanted state is little bit faster system for browsing web and copying photos to local NAS. I don't mention hardware configuration, becouse it's real speed is really deep below the paper parameters.

  Read the article

• How can I login to Ubuntu using a USB serial port?

  - by marc

  How can enable remote terminal login into Ubuntu 9.10 using a USB serial port? I created device /dev/ttyUSB0 and i want to allow logins using Hyper-Terminal. I found some resources but they are related to real hardware rs232 ports. I can't find any information about USB converter. So far I have established connection between that USB-serial port and my laptop. I can send text to the port (cp sometext.txt /dev/ttyUSB0) and read it using hyperterminal. What do I need to do to enable logins on this port?

  Read the article

• Controlling an amplifier power supply from Squeezebox/SqueezeCenter

  - by teabot

  I have a Squeezebox that is connected to an amplifier. I'd like the amplifier to switch on/off whenever the Squeezebox is powered on/off. I don't mind writing some plugin code to SqueezeCenter to do this but in hardware terms I am looking for off-the-shelf components. I imagine that I need some kind of Ethernet controlled power outlet. I have looked at X10 (I can't bring myself to link to their terrible site), but their product range seems extremely confused and it looks as though I'd have to use both RF and comms-over-mains to implement a computer controlled socket. Does anyone have any alternative suggestions? Note: Any components should be available and certified for use in the UK.

  Read the article

• Transferring Windows XP Mode VM to Another Machine?

  - by Omar Kooheji

  I've been running Windows XP mode on my Windows 7 Laptop for a while now and I've got my VM set up just how I like it. I am switchign laptops due to an intermittent hardware failure. Is it possible to transfer my Windows XP mode VM to my new laptop? I know it's just a Windows Virtual PC VM, how would I go about transferring it if this is possible? Will the Fact that I'm moving from Windows 7 Ultimate to Windows 7 Pro make a difference? AFAIK they both support Windows XP Mode.

  Read the article

• Easily recreate a server's "state" [closed]

  - by Brandon Wamboldt

  I want the ability to setup new servers for dev/testing/prod very easily. The reasons for being able to setup a new dev VM is obvious, but for prod my concern is adding a new production server/migrating to a new server. I assume a traditional backup solution won't work as hardware may be different so the binaries/config might be different. I want to get experience with puppet anyways, so I was thinking about creating a manifest that would setup my users, install Postgres, Nginx, PHP-FPM, etc, and configure them the way I specify. Then I could install puppet on a new server, copy down my manifest and apply it locally. This would make keeping my server configs in sync easier too. Is there a better approach I'm not aware of, and does my approach have any pitfalls?

  Read the article

• arcserve vs backup exec vray

  - by Luigi

  I have to buy one backup software to backup a vmware environment with the following server/applications: mixed microsoft windows 2003/2008/2012 server standard environment sql server 2005/2008 mixed linux centos/ubuntu servers postgresql sap environment exchange 2007 linux fileservers windows fileservers active directory random applications/sqlserver/fileserver on workstations xp/7/8 my hardware is: 5 blades on ibm bladecenter, various san, lto4 on 4gbit fiber channel connected to a windows2003 blade where I will install the backup software (backupexec or arcserve). What are your advice and comments over backupexec vray or arcserve choice ? I know that arcserve have a lower price. I used backup exec for some years but I found it pretty complicated. Thank you.

  Read the article

• Linux Logitech QuickCam Pro 9000 - microphone issues

  - by drahnr

  I got a Logitech Quickcam Pro 9000, the cam itself is working as it honors the UVC spec. This fancy WebCam has a integrated mic which worked some time before but now, it does no more. (Note: I use pulseaudio as it is a USB Mic and I am not really keen on the hassle of ALSA setup) Things I check already are if it gets detected at all: $ lsusb |grep Logi Bus 002 Device 002: ID 046d:0809 Logitech, Inc. Webcam Pro 9000 is muted in alsa-mixer - not the case, volume at 100 pavucontrol shows it too, but no input level bar! On top of that, if I open the gnome3 (fallback mode) audio panel(from the desktop panel), and disabel/reenable it in the hardware tab, it works "for some time"... Any hints? Any ideas? I am really out options for now, and the fact it worked like 6 months ago (perfectly) makes it no better.

  Read the article

• Why doesn't my sound card start? It reports code 10.

  - by Sarim Ali

  When I installed the XP for first time my sound card was working fine. But only after the first reboot it has stopped working. Under Device Manager, the section "sound video and game controller" the entry YAMAHA Native DS1 WDM Driver, has a exclamation mark on it. On left clicking and selecting properties it shows this message "This device cannot start. (Code 10)". On trying to update driver it says a better driver can not be found. Any idea how I can solve the issue? Update: As suggested by harrymc I uninstalled the device "YAMAHA Native DS1 WDM Driver" , and scanned for hardware changes. The windows detected and installed the soundcard and it started working properly.BUT, after restarting the same problem occurs. So, now everytime I reboot the computer I am stuck to, repeating the process of uninstalling the device to make it work.

  Read the article

• External hard drive doesn't appear in Computer

  - by Thomas Clayson

  I cannot work out why this is happening. I have an external hard drive (which is an old laptop hard drive with an IDE to USB adapter). Plugging it into my computer powers it up. It spins correctly and the lights on the adapter flash normally. Uninstalling from hardware manager and plugging it back in causes Windows to "install new software", and it says it has installed properly. In Disk Management it comes up in the bottom part as Disk 2 with the right size (~60 GB), but not in the top half. There are three empty drives in the top half. They don't have titles or drive letters. Right clicking them bring up slightly varying context menus, but all with the options disabled. Here is a picture of my Disk Management screen: How do I make this drive show up in My Computer? I need to format it and use it as an external hard drive.

  Read the article

• How can I access shared XP files over wifi with an Archos 5 Internet Tablet with Android?

  - by Fred

  I have an Archos 5 Internet tablet with Android. I have been using it to stream video over my XP wifi network. Yesterday the Archos stopped seeing any of my computers. I have found some programs that allow me to see the network, so I know the hardware works. However, this program does not allow me to pick the correct program to play the files I want. I suspect the problem lies somewhere on the XP side. This would probably work better if the Archos 5 allowed me to manually input the IP address. Help?

  Read the article

• How can I access shared XP files over wifi with an Archos 5 Internet Tablet with Android?

  - by Fred

  I have an Archos 5 Internet tablet with Android. I have been using it to stream video over my XP wifi network. Yesterday the Archos stopped seeing any of my computers. I have found some programs that allow me to see the network, so I know the hardware works. However, this program does not allow me to pick the correct program to play the files I want. I suspect the problem lies somewhere on the XP side. This would probably work better if the Archos 5 allowed me to manually input the IP address. Help?

  Read the article

• TP-LINK-8901 modem does not connect automatically; only works in bridged mode [closed]

  - by Arash

  Possible Duplicate: Cannot Connect To Internet In Automatic (pppoe) Mode Of Modem My TP-LINK-8901 modem does not connect to internet with "always on" (automatic) connection. I have to put it in bridge mode and make a connection in Windows to connect to internet. Also, there is no configuration problem. What I did: Reset modem Update firmware Is there any way to solve the problem myself, e.g. through hardware or software? I can't have it repaired because the warranty already expired.

  Read the article

• Virtual box lost files

  - by Paul Lloyd

  I have been running Virtual Box on a Macbook Pro for a year or more, with an old version of Windows XP running on the virtual machine. Recently my Mac battery dies completely and I had left VB / Windows running. When I re-started the Mac, VB would not load. I reinstalled a recent download of VB from a DMG file I had stored. Now VB starts but when I try to start the virtual machine I get the following message, Failed to open a session for the virtual machine Windows XP. Failed to load VMMR0.r0 (VERR_SUPLIB_WRITE_NON_SYS_GROUP). Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} I have been backing up the MAC using Time Machine and have backups going back months. I really need to access the windows files as they have my Accounts and other business critical stuff. Any ideas please, or does anyone know where I can get some support for this combination of hardware / software, apologies I am a novice in this area. Thanks in advance.

  Read the article

• Wireless printer going offline upon entering power save mode

  - by Regmi

  I recently bought a printer, Samsung ML1865W, a wireless laser printer. It works very well, wirelessly until after a while, it goes to power save mode when the printer goes offline. I then cannot connect to the printer (pinging the ip and various ports associated with it do not give any response) until I power cycle the printer. I have checked my wireless settings and my router, I have installed the printer software in WinXP, Win2000 and in Mac and the printer behaves just the same. Any ideas if the printer hardware itself is broken or that its something on my network/application side that's the culprit. If you own the printer, have you had any trouble like that at any time?

  Read the article

• Should my servers boot from VHD?

  - by tony roth

  I've been testing native vhd boot on several servers. It seems to be pretty transparent in terms of deployment and with my seat of the pants testing I have not noticed any difference in performance. The main reason that I want to boot vhd is due to their transportablility between different hardware and to hyper-v servers. the following roles will be installed. dfsr dhcp iis application server dc <- haven't tested this yet but see no reason why it won't work. With the above low impact (in terms of performance) roles do you thing booting from VHD is appropriate. thx

  Read the article

• Ubuntu - connecting 3rd monitor fails with "xrandr: cannot find crtc for output DVI-0"

  - by MDCore

  I've got a laptop with a DVI and VGA output on the back. With everything connected it will only allow me to run 2 of the 3 monitors e.g. laptop display + VGA or DVI+VGA but not all 3. xrandr says I have 2 CRTC's, 0 and 1. The internet says I should be able to share a CRTC if the modeline is the same, and my 2 external monitors are the exact same make and model. How do I convince the software to drive all this hardware?

  Read the article

• Is there a simple Load Balancer app for development environment on Windows?

  - by djangofan

  Does there exist a simple Load Balancer app for development on Windows? I am running a pair of JBoss 5.x instances in a cluster on a single machine. Normally , this configuration is load balanced by a nice hardware load balancer but I am wondering if there is a simple piece of software to enable load balancing in my Eclipse dev environment. Basically, for example, I want a load balancer running on port 11111 that round-robins between the 2 clustered JBoss instances on ssl ports 8443 and 8543 . (or http port if thats not possible) I know that Glassfish has a built-in load balancer but I can't use Glassfish. One idea I have is to try to setup a separate instance of Tomcat with the "balancer" web app. Im trying that now... not sure if it will work... and its a complicated setup and I wish there was something really easy.

  Read the article

• SNMP - Value of CPU processor load not reflecting reality

  - by Ovesh

  Trying to plot CPU load on my server, with the following hardware: ProLiant DL360p Gen8 (same behavior on ProLiant DL360 G7). The machine is running VMWare ESXi5.1 To create a CPU spike I run dd if=/dev/zero of=/dev/null, and I know the CPU is overloaded, because I can see a correlating spike in the graphs displayed on vCenter. However, running this snmpwalk: snmpwalk -v 1 -c ******** 192.168.MY_IP 1.3.6.1.2.1.25.3.3.1.2 Shows the following results: iso.3.6.1.2.1.25.3.3.1.2.1 = INTEGER: 3 iso.3.6.1.2.1.25.3.3.1.2.2 = INTEGER: 2 iso.3.6.1.2.1.25.3.3.1.2.3 = INTEGER: 2 iso.3.6.1.2.1.25.3.3.1.2.4 = INTEGER: 3 Am I not looking into the right MIB? Should I be multiplying these by a constant? By the way, using HP Agentless Monitoring I was able to get some cpu stats, but not what I'm looking for, at least nothing I could find wading through these MIBs.

  Read the article

• How to avoid Memory "Hard Fault/sec"

  - by Flavio Oliveira

  i've a problem on my windows 2008 server x64, and i cannot understand how can i solve it. i'm looking to Resource Monitor and see about 100 to 200 hard faults/sec. and generally the machine is slow. As i've readed a bit it is caused by a "memory Page" that is no longer available on physical memory and causes a io operations (disk) and it is a problem. The current hardware is a intel core2duo E8400 (3.0GHz) with 6GB RAM on a Windows Server Web 64-bit. Actually the machine have about 2GB Ram used what having 4Gb available to use, Why is the machine requires that high level of Disk operations? what can i do to increase the performance? Im experiencing a memory issues? what should be my starting point?

  Read the article

• Need software to save videos from 4tube.com - to watch the videos smoothly

  - by Carl

  Isn't there a programs that will capture screen writes at the hardware level? I have tried several Firefox add-ons, and several stand-alone programs, and none of them will save videos from this site. I even paid for Replay Media Catcher, and it didn't work, so I got a refund. (The website for the best Firefox video downloader I have, Downloadhelper, said Replay Media Catcher worked with that site.) I have a slow internet connection, and cannot watch videos smoothly unless I can cache them. This site (4tube.com) doesn't cache, when you restart, it reloads, when you pause it stops - so I need to be able to save the videos to be able to watch them.

  Read the article

• What desktop chipsets support AMD's Rapid Virtualization Indexing?

  - by netvope

  Rapid Virtualization Indexing (RVI) is a hardware virtualization feature that can potentially give significant performance improvement. Intel's equivalent is Extended Page Tables. See http://en.wikipedia.org/wiki/Rapid_Virtualization_Indexing for more details. My question is: Does RVI require motherboard or chipset support? If yes, what desktop chipsets support it? I've ordered a Phenom II CPU (which supports RVI) but I haven't bought the motherboard. I'll install XenServer or VMware ESXi (which both support RVI) on the new computer.

  Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >