Search Results

Search found 23004 results on 921 pages for 'internet mapping'.

Page 194/921 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

• What can be done to improve time synchronization on networks with sporadic internet access?

  - by anregen

  I'm looking for advice setting up time servers for a very non-typical network. I support many closed networks that have occasional access to the internet. A network would get access most days for a few hours, but would frequently go 1-3 weeks blacked-out. The computers/servers on this network are mostly *nix-based, but not all the same flavor. The entire network is mobile, so when it connects, it will have very different hops/latency to internet time servers. The servers on the closed network are powered-off frequently (at least daily). Right now, my gut tells me to use NTP (because I hate re-learning all the stuff that someone else already got working pretty well). But I have several issues, and am looking for someone with experience in this type of strange situation. I currently have no solution in place, I'm simply letting the internal clocks drift. This results in errors of ~600s in a majority of networks. I have seen mismatch worse than 10,000s. Is there something "better" than NTP in this situation? I know NTP likes to have very frequent, consistent access to servers that give nearly identical answers. I won't have that. How many internal NTP servers should I configure, so that during periods of internet blackout, I have internal time that is consistent within the closed network? There is no human access. No matter how large the mismatch, the server(s) must attempt to correct itself. Discrete steps are very bad. No matter how large the mismatch, the correction must be "slewed", not "stepped". I understand that this could take many hours to correct.

  Read the article

• How can one restrict network activity to only the VPN on a Mac and prevent unsecured internet activity?

  - by John

  I'm using Mac OS and connect to a VPN to hide my location and IP (I have the 'send all traffic over VPN connection' box checked in teh Network system pref), I wish to remain anonymous and do not wish to reveal my actual IP, hence the VPN. I have a prefpan called pearportVPN that automatically connects me to my VPN when I get online. The problem is, when I connect to the internet using Airport (or other means) I have a few seconds of unsecured internet connection before my Mac logs onto my VPN. Therefore its only a matter of time before I inadvertently expose my real IP address in the few seconds it takes between when I connect to the internet and when I log onto my VPN. Is there any way I can block any traffic to and from my Mac that does not go through my VPN, so that nothing can connect unless I'm logged onto my VPN? I suspect I would need to find a third party app that would block all traffic except through the Server Address, perhaps Intego Virus Barrier X6 or little snitch, but I'm afraid I'm not sure which is right or how to configure them. Any help would be much appreciated. Thanks!

  Read the article

• Entity Framework version 1- Brief Synopsis and Tips &ndash; Part 1

  - by Rohit Gupta

  To Do Eager loading use Projections (for e.g. from c in context.Contacts select c, c.Addresses)  or use Include Query Builder Methods (Include(“Addresses”)) If there is multi-level hierarchical Data then to eager load all the relationships use Include Query Builder methods like customers.Include("Order.OrderDetail") to include Order and OrderDetail collections or use customers.Include("Order.OrderDetail.Location") to include all Order, OrderDetail and location collections with a single include statement =========================================================================== If the query uses Joins then Include() Query Builder method will be ignored, use Nested Queries instead If the query does projections then Include() Query Builder method will be ignored Use Address.ContactReference.Load() OR Contact.Addresses.Load() if you need to Deferred Load Specific Entity – This will result in extra round trips to the database ObjectQuery<> cannot return anonymous types... it will return a ObjectQuery<DBDataRecord> Only Include method can be added to Linq Query Methods Any Linq Query method can be added to Query Builder methods. If you need to append a Query Builder Method (other than Include) after a LINQ method  then cast the IQueryable<Contact> to ObjectQuery<Contact> and then append the Query Builder method to it =========================================================================== Query Builder methods are Select, Where, Include Methods which use Entity SQL as parameters e.g. "it.StartDate, it.EndDate" When Query Builder methods do projection then they return ObjectQuery<DBDataRecord>, thus to iterate over this collection use contact.Item[“Name”].ToString() When Linq To Entities methods do projection, they return collection of anonymous types --- thus the collection is strongly typed and supports Intellisense EF Object Context can track changes only on Entities, not on Anonymous types. If you use a Defining Query for a EntitySet then the EntitySet becomes readonly since a Defining Query is the same as a View (which is treated as a ReadOnly by default). However if you want to use this EntitySet for insert/update/deletes then we need to map stored procs (as created in the DB) to the insert/update/delete functions of the Entity in the Designer You can use either Execute method or ToList() method to bind data to datasources/bindingsources If you use the Execute Method then remember that you can traverse through the ObjectResult<> collection (returned by Execute) only ONCE. In WPF use ObservableCollection to bind to data sources , for keeping track of changes and letting EF send updates to the DB automatically. Use Extension Methods to add logic to Entities. For e.g. create extension methods for the EntityObject class. Create a method in ObjectContext Partial class and pass the entity as a parameter, then call this method as desired from within each entity. ================================================================ DefiningQueries and Stored Procedures: For Custom Entities, one can use DefiningQuery or Stored Procedures. Thus the Custom Entity Collection will be populated using the DefiningQuery (of the EntitySet) or the Sproc. If you use Sproc to populate the EntityCollection then the query execution is immediate and this execution happens on the Server side and any filters applied will be applied in the Client App. If we use a DefiningQuery then these queries are composable, meaning the filters (if applied to the entityset) will all be sent together as a single query to the DB, returning only filtered results. If the sproc returns results that cannot be mapped to existing entity, then we first create the Entity/EntitySet in the CSDL using Designer, then create a dummy Entity/EntitySet using XML in the SSDL. When creating a EntitySet in the SSDL for this dummy entity, use a TSQL that does not return any results, but does return the relevant columns e.g. select ContactID, FirstName, LastName from dbo.Contact where 1=2 Also insure that the Entity created in the SSDL uses the SQL DataTypes and not .NET DataTypes. If you are unable to open the EDMX file in the designer then note the Errors ... they will give precise info on what is wrong. The Thrid option is to simply create a Native Query in the SSDL using <Function Name="PaymentsforContact" IsComposable="false">   <CommandText>SELECT ActivityId, Activity AS ActivityName, ImagePath, Category FROM dbo.Activities </CommandText></FuncTion> Then map this Function to a existing Entity. This is a quick way to get a custom Entity which is regular Entity with renamed columns or additional columns (which are computed columns). The disadvantage to using this is that It will return all the rows from the Defining query and any filter (if defined) will be applied only at the Client side (after getting all the rows from DB). If you you DefiningQuery instead then we can use that as a Composable Query. The Fourth option (for mapping a READ stored proc results to a non-existent Entity) is to create a View in the Database which returns all the fields that the sproc also returns, then update the Model so that the model contains this View as a Entity. Then map the Read Sproc to this View Entity. The other option would be to simply create the View and remove the sproc altogether. ================================================================ To Execute a SProc that does not return a entity, use a EntityCommand to execute that proc. You cannot call a sproc FunctionImport that does not return Entities From Code, the only way is to use SSDL function calls using EntityCommand.  This changes with EntityFramework Version 4 where you can return Scalar Types, Complex Types, Entities or NonQuery ================================================================ UDF when created as a Function in SSDL, we need to set the Name & IsComposable properties for the Function element. IsComposable is always false for Sprocs, for UDF's set this to true. You cannot call UDF "Function" from within code since you cannot import a UDF Function into the CSDL Model (with Version 1 of EF). only stored procedures can be imported and then mapped to a entity ================================================================ Entity Framework requires properties that are involved in association mappings to be mapped in all of the function mappings for the entity (Insert, Update and Delete). Because Payment has an association to Reservation... hence we need to pass both the paymentId and reservationId to the Delete sproc even though just the paymentId is the PK on the Payment Table. ================================================================ When mapping insert, update and delete procs to a Entity, insure that all the three or none are mapped. Further if you have a base class and derived class in the CSDL, then you must map (ins, upd, del) sprocs to all parent and child entities in the inheritance relationship. Note that this limitation that base and derived entity methods must all must be mapped does not apply when you are mapping Read Stored Procedures.... ================================================================ You can write stored procedures SQL directly into the SSDL by creating a Function element in the SSDL and then once created, you can map this Function to a CSDL Entity directly in the designer during Function Import ================================================================ You can do Entity Splitting such that One Entity maps to multiple tables in the DB. For e.g. the Customer Entity currently derives from Contact Entity...in addition it also references the ContactPersonalInfo Entity. One can copy all properties from the ContactPersonalInfo Entity into the Customer Entity and then Delete the CustomerPersonalInfo entity, finall one needs to map the copied properties to the ContactPersonalInfo Table in Table Mapping (by adding another table (ContactPersonalInfo) to the Table Mapping... this is called Entity Splitting. Thus now when you insert a Customer record, it will automatically create SQL to insert records into the Contact, Customers and ContactPersonalInfo tables even though you have a Single Entity called Customer in the CSDL =================================================================== There is Table by Type Inheritance where another EDM Entity can derive from another EDM entity and absorb the inherted entities properties, for example in the Break Away Geek Adventures EDM, the Customer entity derives (inherits) from the Contact Entity and absorbs all the properties of Contact entity. Thus when you create a Customer Entity in Code and then call context.SaveChanges the Object Context will first create the TSQL to insert into the Contact Table followed by a TSQL to insert into the Customer table =================================================================== Then there is the Table per Hierarchy Inheritance..... where different types are created based on a condition (similar applying a condition to filter a Entity to contain filtered records)... the diference being that the filter condition populates a new Entity Type (derived from the base Entity). In the BreakAway sample the example is Lodging Entity which is a Abstract Entity and Then Resort and NonResort Entities which derive from Lodging Entity and records are filtered based on the value of the Resort Boolean field =================================================================== Then there is Table per Concrete Type Hierarchy where we create a concrete Entity for each table in the database. In the BreakAway sample there is a entity for the Reservation table and another Entity for the OldReservation table even though both the table contain the same number of fields. The OldReservation Entity can then inherit from the Reservation Entity and configure the OldReservation Entity to remove all Scalar Properties from the Entity (since it inherits the properties from Reservation and filters based on ReservationDate field) =================================================================== Complex Types (Complex Properties) Entities in EF can also contain Complex Properties (in addition to Scalar Properties) and these Complex Properties reference a ComplexType (not a EntityType) DropdownList, ListBox, RadioButtonList, CheckboxList, Bulletedlist are examples of List server controls (not data bound controls) these controls cannot use Complex properties during databinding, they need Scalar Properties. So if a Entity contains Complex properties and you need to bind those to list server controls then use projections to return Scalar properties and bind them to the control (the disadvantage is that projected collections are not tracked by the Object Context and hence cannot persist changes to the projected collections bound to controls) ObjectDataSource and EntityDataSource do account for Complex properties and one can bind entities with Complex Properties to Data Source controls and they will be tracked for changes... with no additional plumbing needed to persist changes to these collections bound to controls So DataBound controls like GridView, FormView need to use EntityDataSource or ObjectDataSource as a datasource for entities that contain Complex properties so that changes to the datasource done using the GridView can be persisted to the DB (enabling the controls for updates)....if you cannot use the EntityDataSource you need to flatten the ComplexType Properties using projections With EF Version 4 ComplexTypes are supported by the Designer and can add/remove/compose Complex Types directly using the Designer =================================================================== Conditional Mapping ... is like Table per Hierarchy Inheritance where Entities inherit from a base class and then used conditions to populate the EntitySet (called conditional Mapping). Conditional Mapping has limitations since you can only use =, is null and IS NOT NULL Conditions to do conditional mapping. If you need more operators for filtering/mapping conditionally then use QueryView(or possibly Defining Query) to create a readonly entity. QueryView are readonly by default... the EntitySet created by the QueryView is enabled for change tracking by the ObjectContext, however the ObjectContext cannot create insert/update/delete TSQL statements for these Entities when SaveChanges is called since it is QueryView. One way to get around this limitation is to map stored procedures for the insert/update/delete operations in the Designer. =================================================================== Difference between QueryView and Defining Query : QueryView is defined in the (MSL) Mapping File/section of the EDM XML, whereas the DefiningQuery is defined in the store schema (SSDL). QueryView is written using Entity SQL and is this database agnostic and can be used against any database/Data Layer. DefiningQuery is written using Database Lanaguage i.e. TSQL or PSQL thus you have more control =================================================================== Performance: Lazy loading is deferred loading done automatically. lazy loading is supported with EF version4 and is on by default. If you need to turn it off then use context.ContextOptions.lazyLoadingEnabled = false To improve Performance consider PreCompiling the ObjectQuery using the CompiledQuery.Compile method

  Read the article

• WPA2 authentication fails on Ubuntu 12.04 using Rosewill RNX-N1

  - by user94156

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. RNX-X1 works on other systems (including TV); also have 2 of 'em and tried each. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• WPA2 authentication fails using USB network devices (Linksys and Rosewill)

  - by Greg Youtz

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. Both failed to authenticate. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no Would appreciate insight on how to chase this down.

  Read the article

• Ensure Future Browser Compatibility - SharePoint Branding

  - by KunaalKapoor

  HTML and Future Internet Explorer Compatibility with SharePointAs new versions of Internet Explorer are released, the way HTML is rendered by the browser could change over time. To address the possibility of changes, Microsoft uses the X-UA-Compatible META tag that targets HTML markup to a specific version of Internet Explorer. The default SharePoint 2010 master pages are set to force current and future versions of Internet Explorer to render HTML in Internet Explorer 8 mode like the following markup:<meta http-equiv="X-UA-Compatibile" content="IE=IE8" />The Adventure Works Travel HTML includes the META tag to help ensure future Internet Explorer versions will display the SharePoint HTML properly.For more information about the Internet Explorer Standards Mode, see META Tags and Locking in Future Compatibility.

  Read the article

• Enabling printing feature within the Terminal Server environment that is published to the internet?

  - by Albert Widjaja

  I got the home and remote office users connect to the Terminal Server on my Windows Server 2003 that I published securely through Juniper SSL VPN client applet, they use normal internet connection to access the link which pop up the Terminal Server Remote Desktop application, so my question is, how can they print out the document from within their terminal server session ? if it is going through the internal office LAN mapping the printer through Remote Desktop connection is the solution but not for this one. Any kind of help and suggestion would be greatly appreciated. Thanks

  Read the article

• Skype

  Skype lets you talk to anyone, anywhere for free over the Internet

  Read the article

• Unity: How to remove(unregister) registered instance from Unity mapping.

  - by bug0r

  Hello, I meet one problem that i can't solve now. I have the following: UnityHelper.DefaultContainer.RegisterInstance(typeof(IMyInterface), "test", instance); where UnityHelper.DefaultContainer is my helper for getting unity container with loaded configuration. here I registered instance as an instance of IMyInterface. So anywhere(some time after using) I want to remove this mapping. Remove it at all. How I can do it? I have tried UnityHelper.DefaultContainer.Teardown(instance) but is was unsuccessfull and the following code returns instance anyway. UnityHelper.DefaultContainer.ResolveAll() Any ideas? Thank you.

  Read the article

• How to generate entity classes from nhibernate mapping files during runtime.

  - by Denis Rosca

  Hello, i need some help with c# and nhibernate. I'm working on a project that requires the entity classes to be generated from hbm files at runtime. I get the mapping files from a service, and then need to generate the classes dynamicaly and configure nhibernate to use them. The problem is that i'm new to nhibernate and not much of a pro in c#, so me writing the piece of code that achieves this is very error-prone. I was wondering if you know of any open source software that i could use. Worst case scenario (if can't find anything that even remotely resembles what i need), do you guys have some advice on where should i start? Maybe some links ? Thanks, Denis.

  Read the article

• How do I Connect a 30yr-old Tandy 1400LT laptop to the internet?

  - by Clemens Bergmann

  Just for the fun of it, I want to get an old Tandy 1400LT laptop: small monochrome display two floppy drives rs-232c connector "printer" connector connect the thing the internet and use it as an ssh terminal. How would I connect it to the internet? The software should be no problem as it is a 386 hardware. There should be a small linux distribution which can be run on it. But how would I phisically connect the hardware? It has no ethernet port. Has someone experience with Serial/Paralel-to-ethernet converters?

  Read the article

• Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

  - by gil b.

  Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

  Read the article

• How to proxy and encrypt all my internet traffic with Win7 and Win2008R2?

  - by Malartre

  Hi, I have a Windows 7 laptop and a Windows 2008 R2 server. How can I encrypt and route all my internet request from the Win7 laptop to the Win2008R2 server? I guess the server would be called a proxy? Goal is to prevent unencrypted network snooping. I found this article about using SSH, but I would prefer an official windows integrated solution. What's the Microsoft "way" on this? http://lifehacker.com/237227/geek-to-live--encrypt-your-web-browsing-session-with-an-ssh-socks-proxy I would like this to work for all internet traffic, not just browser traffic and I would like to set this up on many Win7 clients. Carl

  Read the article

• Which is prefered internet security + Antivirus solution for Windows, with good detection rate? [clo

  - by metal gear solid

  Possible Duplicate: Free antivirus solutions for Windows Which is the best internet security + Antivirus solution for Windows? free/opensource or commercial it doesn't matter I need best solution. Is Kaspersky best ? or any other? http://www.kaspersky.com/kaspersky_internet_security Award-winning technologies in Kaspersky Internet Security 2010 protect you from cybercrime and a wide range of IT threats: * Viruses, Trojans, worms and other malware, spyware and adware * Rootkits, bootkits and other complex threats * Identity theft by keyloggers, screen capture malware or phishing scams * Botnets and various illegal methods of taking control of your PC or Netbook * Zero-day attacks, new fast emerging and unknown threats * Drive-by download infections, network attacks and intrusions * Unwanted, offensive web content and spam

  Read the article

• Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

  - by gil b.

  Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

  Read the article

• Tutorial for texture mapping a map onto an Open GL ES sphere?

  - by hotpaw2

  I'm not looking for a library or even open source code. I want to learn how to do this on my own. Where do I start to find an online tutorial, a book chapter, or other educational material for generating a polygonal model of a 3D sphere suitable for feeding to Open GL ES on an iPhone, and then mapping the polygons to some sort of 2D map data so I can texture map the sphere? Is there some sort of software tool (blenders? mayan?) with a tutorial on how to do generate this data? Where is the best place to start?

  Read the article

• Share Internet via Ethernet from Mac OSX to Ubuntu (10.04)?

  - by lackey

  Anyone know how to share an Internet connection over Ethernet, from Mac OSX to Ubuntu (Lucid Lynx 10.04)?

  Read the article

• JPA One to Many using JoinTable Error

  - by user553015

  I am trying to model 1:N (Person & Address) relationship using a junction table (Person_Address). 1.Person (personId PK) 2.Address (addressId PK) 3.PersonAddress ( personId, addressId composite PK, personId FK references Person, addressid FK references Address ) @Entity public class Person { @OneToMany @JoinTable( name="PersonAddress", joinColumns = @JoinColumn( name="personId"), inverseJoinColumns = @JoinColumn( name="addressId") ) public Set<Address> getAddresses() {...} ... } I encounter following error. Not able to find any solution. Caused by: org.hibernate.MappingException: Could not determine type for: com.realestate.details.Address, at table: Person, for columns: [org.hibernate.mapping.Column(address)] at org.hibernate.mapping.SimpleValue.getType(SimpleValue.java:269) at org.hibernate.mapping.SimpleValue.isValid(SimpleValue.java:253) at org.hibernate.mapping.Property.isValid(Property.java:185) at org.hibernate.mapping.PersistentClass.validate(PersistentClass.java:440) at org.hibernate.mapping.RootClass.validate(RootClass.java:192) at org.hibernate.cfg.Configuration.validate(Configuration.java:1108) at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1293)

  Read the article

• What is the registry key for Windows XP to disable Internet Connection Sharing?

  - by Alex Argo

  What is the registry key for Windows XP to disable Internet Connection Sharing?

  Read the article

• How to proxy and encrypt all my internet traffic with Win7 and Win2008R2?

  - by Malartre

  I have a Windows 7 laptop and a Windows 2008 R2 server. How can I encrypt and route all my internet request from the Win7 laptop to the Win2008R2 server? I guess the server would be called a proxy? Goal is to prevent unencrypted network snooping. I found this article about using SSH, but I would prefer an official windows integrated solution. What's the Microsoft "way" on this? http://lifehacker.com/237227/geek-to-live--encrypt-your-web-browsing-session-with-an-ssh-socks-proxy I would like this to work for all internet traffic, not just browser traffic and I would like to set this up on many Win7 clients. Carl

  Read the article

• How do I split an internet connection into 4 equal connections?

  - by luis velasco

  My 4 roomates and I have a problem: One of my roomies is downloading torrents all the time. When somebody need make a call or doing something like you tube or a quiz using the internet conection. The internet is very slow.... I can not create a network using a computer as a proxy. I just need a good router (and in the budget no more than $50).. I just want to split a 16MB connection into a separated 4 x 4 mb (theoretically)..

  Read the article

• ASPX page renders differently when reached on intranet vs. internet?

  - by MattSlay

  This is so odd to me.. I have IIS 5 running on XP and it's hosting a small ASP.Net app for our LAN that we can access by using the computer name, virtual directory, and page name (http://matt/smallapp/customers.aspx), but you can also hit that IIS server and page from the internet because I have a public IP that my firewall routes to the "Matt" computer (like http://213.202.3.88/smallapp/customers.aspx [just a made-up IP]). Don't worry, I have Windows domain authentication is in place to protect the app from anonymous users. So all the abovea parts works fine. But what's weird is that the Border of the divs on the page are rendered much thicker when you access the page from the intranet, versus the internet, (I'm using IE8) and also, some of the div layout (stretching and such) acts differently. Why would it render different in the same browser based on whether it was reached from the LAN vs. the internet? It does NOT do this in FireFox. So it must be just an IE8 thing. All the CSS for the divs is right in the HTML page, so I do not think it is a caching matter of a CSS file. Notice how the borders are different in these two images: Internet: http://twitpic.com/hxx91 . Lan: http://twitpic.com/hxxtv

  Read the article

• Which is the best internet security + Antivirus solution for Windows?

  - by metal gear solid

  Which is the best internet security + Antivirus solution for Windows? free/opensource or commercial it doesn't matter I need best solution. Is Kaspersky best ? or any other? http://www.kaspersky.com/kaspersky_internet_security Award-winning technologies in Kaspersky Internet Security 2010 protect you from cybercrime and a wide range of IT threats: * Viruses, Trojans, worms and other malware, spyware and adware * Rootkits, bootkits and other complex threats * Identity theft by keyloggers, screen capture malware or phishing scams * Botnets and various illegal methods of taking control of your PC or Netbook * Zero-day attacks, new fast emerging and unknown threats * Drive-by download infections, network attacks and intrusions * Unwanted, offensive web content and spam

  Read the article

• Can't access internet with 32-bit browser(Chrome, FF, IE)! The 64-bit version of IE on Win 7 works f

  - by Sarveshwar

  I had installed Kaspersky AV 2010 two days ago. Everything was fine until I was not able to access the internet a few minutes back with the 32 bit browsers I have installed - Chrome, Firefox and the 32 bit IE. Then I see that utorrent is working fine!! So again I checked with the 64 bit IE and I could access the internet. I am currently using IE 64 bit to access superuser. Please help! I have uninstalled the KAV 2010. I thought that was the problem. Is this any virus or something? Also, whenever any browser (except IE 64), the screen freezes. Nothing except the browser works! And after the browser is closed, everything comes back to normal. Thanks!

  Read the article

• Can't access internet with 32-bit browser(Chrome, FF, IE)! The 64-bit version of IE on Win 7 works fine

  - by Sarveshwar

  I had installed Kaspersky AV 2010 two days ago. Everything was fine until I was not able to access the internet a few minutes back with the 32 bit browsers I have installed - Chrome, Firefox and the 32 bit IE. Then I see that utorrent is working fine!! So again I checked with the 64 bit IE and I could access the internet. I am currently using IE 64 bit to access superuser. Please help! I have uninstalled the KAV 2010. I thought that was the problem. Is this any virus or something? Also, whenever any browser (except IE 64), the screen freezes. Nothing except the browser works! And after the browser is closed, everything comes back to normal. Thanks!

  Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >