Search Results

Search found 8369 results on 335 pages for 'company'.

Page 196/335 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

  • Caching Reverse-Proxy ISP Host for a Low-Bandwidth Server

    - by Casey
    I am building a webcam w/ HTTP server that will be running from a low-bandwith connection. The content on the site will be changing every 5 to 10 minutes. Instead of serving files directly from this connection, are there hosting companies that can act as a reverse proxy for my site? Therefore, if nobody is using the site, the local internet connection remains idle. And if I receive 1000 hits all at the same time, only one HTTP GET is required, and the hosting company (on a fat pipe) continues serving the other 999 requests? This doesn't sound like a very common usage model, but I feel like this would be the optimal solution to my situation.

    Read the article

  • System says memory controller not available and doesn't boot?

    - by Martin
    Hello everybody, Recently I have had a MainBoard-problem. I've send my mainboard to service and today I got it back from the company. It is a Foxconn 520a mainboard. Now I have installed my exchanged mainboard. But now I have a problem. My system boots until the device list with IRQ entries appear. The system says "Verifying DMI-pool-data..." and nothing happens. The IRQ-device list shows that the memory-controller is not available. All other devices have got an IRQ. Bus No. Device No. Func No. Vendor/Device Class Device Class IRQ 0 0 0 10DE 0547 0500 Memory Controller NA Do you have any ideas where the problem could be? I already have disconnected all unnecessary devices like the hard disks. Perhaps it is a BIOS problem, but I don't know where I should look. Would be nice if there is any advice, Greetings, Martin

    Read the article

  • What is IPKVM and why would I need that to install SQL Server on my Web Server?

    - by Eric
    Hello. I have a dedicated server, and will be installing SQL Server. However, my hosting company said they can connect an external CD ROM drive and give me KVM over IP to install SQL Server. My question is, what is IPKVM, and how does it work? Do I need special hardware or software on my side to use it....or do I just connect via remote desktop? Also, why can't I remote into my server through remote desktop instead of using KVM over IP?

    Read the article

  • Should app config files be in jboss/bin directory?

    - by djangofan
    I am a Integration Engineer for a software company. My development team has generated various jboss .ear applications that rely on configuration files being in the jboss/bin directory and setting the CLASSPATH externally using batch files (on Windows from an external LIB directory) rather than using jboss's internally loaded classes. Is this the right/standard way of doing things? Would some other location be better (for the config files) such as jboss/server/instancename/deploy or some other directory? Any opinons on how I can direct my development team to doing things in a best practices fashion?

    Read the article

  • What is the safest and least expensive way to store 10 terabytes of data?

    - by Josh T
    I'm a member of a production company and we're preparing for our first feature film. We've been discussing methods of data storage to keep all of our original content safe (for as long as possible). While we understand data is never 100% safe, we'd like to find the safest solution for us. We've considered: 16TB NAS for on-site storage 4-5 2TB hard drives (cheap, but not redundant), copy original footage to drives then seal in static free bag Burn data to Blu-Ray disks (time consuming and expensive: 200 disks == $5000) Tape drive(s)? I know the least about tape drives, except the fact that they're more reliable than disks. Any experience/knowledge with this amount of data is hugely appreciated.

    Read the article

  • Unable to connect to another computer from the Task Scheduler on Windows 7

    - by Clem
    I am getting the following error when trying to connect to another computer from the Task Scheduler on Windows 7: "The remote computer was not found." The computer that I am trying to connect to is definitely on the network as I can ping it and browse its shared folders in Windows Explorer. Note that I get the same error message when trying to perform the same operation from Performance Monitor. This suggests that I need to something to enable remote connection to the Task Scheduler. I am not very experienced with Windows administration and I am not sure where to look. To give a bit more context, I want to use the Task Scheduler to automatically start Perf Mon on a few machines at my company. I'd like to setup the Task Scheduler remotely. Does anyone know what I need to do?

    Read the article

  • Best Timing for Windows AD Domain Name Change

    - by Cliff Racer
    A while back when I first started with my company, the domain had already been set up using a "xxx.net" DNS name for the internal AD namespace. The shortname is just fine and I feel no need to change it but I have always hated how we used an internet DNS name for our internal AD. We are planning an AD upgrade from 2003 to 2008R2 and I would like to work this DNS name change if possible. I know there are procedures for doing a full domain name change but my question is: Is a FULL domain name change neccessary if all I want to change is the internal DNS name of the domain? Would it be better to do this change after the 2008R2 domain upgrade?

    Read the article

  • IPv4 private address assignment

    - by helloworld922
    I'm working on a private network which uses static IPv4 addresses as well as DHCP addressing for the physical LAN network. At a previous company I worked at they would assign static addresses in the 10.*.*.* space and all DHCP/LAN addresses were assigned in the 192.168.*.* space. Both of these address spaces are defined in the IPv4 private address space and there were never any internal conflicts. From personal experience at home, school, at work, and pretty much any other machine I've dealt with extensively (Windows and a few Linux distros), the DHCP server would always by default choose an address from the 192.168.*.* address space. Now my question is can I rely on this behavior? Do DHCP servers always by default assign from the 192.168.*.* pool (or any pool other than the 10.*.*.* pool), leaving the 10.*.*.* pool free for private static addressing? If not, under what conditions might a DHCP server choose an address in the 10.*.*.* address space?

    Read the article

  • Set security on pattern of sub folders (Server 2003)

    - by Mark Major
    I have a folder structure similar to the one shown below these paragraphs. How do I change security on every 'Photos' folder without clicking through each individually in Windows Explorer? There are about 50 top level folders (Bob, Jim, Eva, etc, etc) which have the same layout of folders inside. I am keen for any suggestions, either scripting or GUI. I am on Windows Server 2003. Cheap/free method would be good, as the company is part of a registered charity. Ideally I would like to do this via DFS path. E.G. \\mycompany.local\Shared\Staff\Bob\ Thanks for reading. Thanks for any info. Mark Bob Review Profile Photos Jim Review Profile Photos Eva Review Profile Photos

    Read the article

  • Using Remote Desktop, connect to a Windows 7 domain user account without first logging on locally?

    - by calavera
    I have a dell laptop (henceforth we'll call this the server) running Windows 7 Enterprise. The server is part of my company's domain. My primary user account is a domain account. When I am at home and not connected to the domain, I prefer to connect to the server using Remote Desktop Connection from my MacBook Pro (we'll call this the client). The problem is, that if I do not physically login to the server, I am unable to connect to it using RDC from the client. I have a local administrator account on the server, and connecting to it via RDC works just fine. I had a feeling that the Mac RDC application was not giving me the full story, so I attempted the same procedure from a Windows 7 client. When trying to login, I get this message: So basically, If I logon to the server physically with my domain user and lock the computer, I can then successfully logon from the client. Otherwise, I am unable to connect.

    Read the article

  • How to manage preventive maintenance planning for external IT support?

    - by code-gijoe
    I am a bit puzzled by the way to handle server upgrade planning for software we maintain on remote sites. This is my case: I work for a software company that has many external clients. We are trying to be more Agile in our development so we plan to release small improvements every quarter and we wish to keep our clients informed of maintenance schedules. Instead of having angry clients that believe there ROI of our support plan is low, we want to be more proactive. Lets say we have 100 machines to take care of, is there some tool to assist me in planing the maintenance with clients? Right now I get a call from a client that is unhappy requesting we upgrade them, that is when we go into panic mode and start making calls. That is when I need to check my calendar, coordinate with the other guys, call a few times, change the date again and again until everyone is happy. Can this be done better?

    Read the article

  • Web Server with phpMyAdmin

    - by Kumar P
    We have web development company, We using RHEL 5 as local (proxy) server with few windows XP client machines. Now i want to make my Server machine as Web Server ( LAN only ), with mysql and phpMyAdmin. I installed httpd,php,mysql by yum. How to install phpMyAdmin ? And Where i want to installl ? Now i want to make my client machines can create php files in web folder, Also use mysql and phpMyAdmin. How can i do it ? Give me clear steps to do it .

    Read the article

  • Internal Website links only working for some users

    - by Ryan
    We are having a very hard time trying to figure out this problem or the root cause. Our website www. countrymusicislove .com is only correctly displaying the homepage for some users. Anytime they click on a post, about me, etc, a 404 error page is displayed. Everything worked fine before we moved over to a new hosting company 2 weeks ago. I am looking for any ideas and even willing to pay someone to troubleshoot and fix this issue as no one seems to have an answer. The entire website is done in the latest version of wordpress. The old website address for the website is http://siteground243.com/~countr10/ And the domain name was registered through google for enom.com Everything is now going through Arvixe.com On my work computer, I am able to get the 404 error to appear on other pages by turning on friendly error messages. When I turn off friendly error messages, everything seems to work. I have tried this several times and it doesn't seem like a coincidence.

    Read the article

  • How can I find a laptop if it has a different model name all over the world?

    - by Mike
    CONUNDRUM: A laptop review in the UK talks about how brilliant the "ASUS ABCDE 55" is, but in America, France, etc there is no such laptop name. In fact it's called "ASUS 12345 AB" - AAARRGH! QUESTION: Is there a way of finding out all the diverse names for the same laptop all over the world? Example: if Samsung create a R2D2500, then what is that spec laptop called in all the other countries (if they release it of course). Or if it's not released, what is their similar spec laptop called in the other countries? I understand that specs may be different, but if I read a review on my trusted UK website, but live in say Australia, I want to be able to find the name of the same laptop in Australia and then check out local places to buy it. So if anyone knows if there is a technique, specific website, or even how to use a company website to find out these annoying name changes I'd really appreciate it.

    Read the article

  • How likely can my data be recovered after Windows CHKDSK performed on a degraded RAID 5 array?

    - by chrisling106
    Hello there, We have a RAID 5 setup with 3 SATA disks, #2 went down as reported on the pre-POST screen. Unfortunately, for some reason out of my control, the system was rebooted with a degraded RAID :-O Windows XP (64-bit) loaded, CHKDSK ran automatically and done its recovery! From that point onwards, the following error prompts every time even in Safe Mode: lsass.exe - The endpoint format is invalid I took those 3 disks to the data recovery expert and need to wait at least 2-4 days for results. There are 2 VMs on multiple files stored in this RAID 5 array, and there's no backup! Sorry, I just inherited the system from an ex-staff who has left the company 2 months before I joined. How likely the data can be recovered?

    Read the article

  • Jungledisk - choosing between Amazon S3 and Rackspace ?

    - by Dietmar
    Hi, jungledisk is owned by rackspace and offers an option to choose Amazon S3 which charges for traffic whereby if data is stored on rackspace, no charges for traffic. For a small company, to just backup files with jungle disk from ubuntu linux OS computers, i wonder what to choose. Commercial psychologically the price on traffic and the Amazon brand make it appear or maybe it is, of better quality than the cheaper Rackspace offer which is when it comes for just backing up ok ? but if its about backing up around 30 GB which updates from time to time, what would you consider a good choice ?

    Read the article

  • Web browsing is fast, but downloads are slow

    - by Ricket
    I work for a company on my university's campus, helping with general IT problems and some web development. But lately there has been a problem that has me and my boss completely stumped. We, plus one contractor, make up the entire IT department, so I'm reaching out to you for help. All around the office, we have wall jacks. These collect in a closet down the hall and all plug into a switch. This switch, along with our individual server jacks, plugs into another switch, and that switch plugs into our firewall hardware. Then the firewall is connected out to our campus network. Our campus internet is, well, very fast. I don't know exactly the terms, tiers, etc., but we have thousands of students and downloads can run as fast as 10 MB/s at night; uploads are sometimes even faster. I think we're practically ISP level. In short, I have a lot of faith that it is not the campus side of things that is causing a problem, combined with other evidence I'll mention in a moment. So our symptoms: web browsing is fast. Web pages, images, etc. load instantly. No problems there. But then when I go to download something, the download starts fast but very quickly (a matter of seconds) drops to nearly 0. Often it will actually drop to 0 and time out. This happens with even very small files, 1 MB or less. It smells to me like a QoS sort of thing. I'm not entirely sure, and I wanted to get your opinions first. My boss is hesitant to touch our firewall, much less let me touch it, and it was set up and is managed by a consultant remotely. These problems don't seem tied to a time of the day. I've tried downloads after 5:00 and still the same thing happens. From my desk, I can turn on my wireless adapter and pick up the campus wireless access point. If I unplug ethernet and connect to it, downloads are fast. This adds to my suspicion that it's limited to our company network. Also, a number of weeks ago the consultant upgraded our firewall firmware. Suddenly everything was very fast. I tested with downloads from Sun and speedtest.net and things were blazing fast, as they should be with our campus internet! It was wonderful, and I figured the slow speeds were an old firmware bug. In a matter of days, things steadily declined until they were back to the old symptoms. Oh, and we have antivirus installed on every computer, and we keep it up to date. Though I suppose the possibility is still there that someone could have spyware which is bogging down our internet, in which case what is the easiest/best way to find this out? (maybe this should go in a separate question) Thank you for your patience in reading all of this. Do you have any ideas as to what I can try? Is this something that you've experienced before? What sort of tools or methods can I use to try and diagnose the problem? P.S. everything here is Windows. Windows Server 2003 and 2008 on our servers, and Windows XP on employees' machines. Update: We are submitting a ticket to the university to just take a look and see if they see anything unusual and/or can suggestion methods for us to try and pinpoint our problem. Hopefully they'll be helpful! I'll update this to let you know what goes on. Update again: We found a hub (yes, a HUB) right between our campus connection and our firewall. It had only those two ethernet cables plugged into it, nothing else. After removing the hub, our speeds have jumped up to several mbps. However in talking with the campus, we got them to run a gigabit line to our firewall in place of the 100mbps line. As of friday, we are at about 65 mbps up and down (according to speedtest.net at 8am)!! Go NC State!!

    Read the article

  • would a dynamic wan disrupt a static lan?

    - by JohnMerlino
    So I found out that the cable company use the DHCP to assign the public ip address dynamically. So a subscriber's public facing ip address can change during the length of their subscription. Now what if you remove DHCP on a particular computer, which you plan to use as a web server, so that the machine has a static, unchanging IP address. If the public ip address was to change, would this confuse the Network Address Translation (NAT) and cause some sort of disruption? Please answer in layman terms, as I'm still grasping concepts here. thanks.

    Read the article

  • Is there a relation between MS SQL Server client licenses and performance

    - by ramdaz
    I have a customer who has an .Net application running on MS SQL Server 2008, supplied by our company as a part of Microsoft Small Business Server. He started off with around 5 users, and hence we had not sold any extra licenses. Today there are 40 users, and there's performance degradation. An MS Consultant said that to improve performance you need to buy extra licenses. Is there a relationship. I am anyway planning to force the customer to buy extra licenses on legal grounds. But will there be any appreciable performance difference too? Advice welcome

    Read the article

  • Activesync/OWA Desktop Client

    - by prestomation
    At my company we have Exchange 2k3 with OWA being public, serving up Activesync and webmail. There is no pop3 or imap support from our admins. Outlook 2k3's RPC over HTTP is also disabled Is there a desktop client that can connect to Activesync or OWA? If my ipod touch can connect to activesync, why can't my pc? I'd preferably like a linux daemon that could simply forward emails to my gmail address, but I guess I'll take what I can get. Thanks EDIT: In case it was not clear, our Exchange server is hidden completely behind a firewall, and a second exchange server has only activesync and https ports opened to the world.

    Read the article

  • Share internet with my phone?

    - by Kenneth Cochran
    Most people want to use their cellphone as a modem for their computer, commonly referred to as 'tethering'. I'm actually interested in doing the opposite: Sharing my landline internet connection(which is much faster than any 3G service) with by cellphone. My phone is a Verizon BlackBerry Curve 8330 and it has USB and bluetooth connections. I know both USB and Bluetooth are capable of supporting tcp/ip traffic what's not so clear is: Is IP over USB or Bluetooth standardized? Is it supported on my phone? Has my cellphone company crippled my phone to prevent me from using it?

    Read the article

  • Website deployment - managing user-uploaded content?

    - by Legion
    I'm a programmer by trade, "server administrator" by company necessity. We're looking at dumping the old painful "update site by FTP upload" style of deployment. Having the webserver check out the latest code base from version control into a folder and having a "current" symlink point to the latest checkout (allowing for easily stepping back to an older version by changing the symlink) seems to be the way we want to go. But I have a question: what's a good practice for dealing with user-uploaded content? This stuff isn't in version control. I have a couple of ideas for dealing with this, but what is the smart, accepted practice?

    Read the article

  • I can't remove a background image in Powerpoint 2007

    - by computergeek
    Hello Everyone! I have a Powerpoint 2007 document. There is this annoying background graphic in my Powerpoint slide. I know about slide master, but this little bugger is not something that I can delete from slide master. Argh!!!! The graphic is a little pumpkin at the bottom of the slide and my company logo at the top. http://www.violetonresumes.com/HelpMeRemoveThisGraphic.pptx Here is a copy of the document. I've already lost two hours of my life on this one. Any help would be greatly appreciated. Cheers

    Read the article

  • Migrating LDAP user and password to SAMBA4 AD

    - by Rudy Dajoh
    As title suggests. We are migrating from OpenLDAP as user authentication to Samba 4 AD Domain. But I can't find any information on how to transfer passwords and users to Samba 4 AD. How to migrate all LDAP user base at ou=People,dc=company,dc=com to samba 4 AD domain? I don't need to assistance transferring everything, I only need to transfer user accounts. I've finished migrating them all but user/passwords. Can it be done? If so, how?

    Read the article

  • Cannot access SWITCH thru VPN

    - by MadBoy
    I've VPN connection set up that i connect to company with. I can connect to all devices (other switches, routers, servers from same subnet with same settings just diffrent ip) but I can't connect to NetGear Router GS748Tv3. Settings on switch: IP address 192.168.1.8 Subnet mask 255.255.255.0 Default gateway 192.168.1.1 Management VLAN ID: 0 (1 - 4094 or 0) (0 means all VLANs) Switch has 2 VLAN's configured 1 and 2. I can access this switch thru VPN if i log in to server and from server to switch but this is a little bit slower then normal way. Anything I'm missing?

    Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >