Search Results

Search found 12068 results on 483 pages for 'sv gets'.

Page 196/483 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• How do I re-enable the backlight?

  - by Scott Severance

  Since Oneiric, if I leave my machine (HP Mini 110 netbook) unattended and it goes into power-save mode, the backlight gets disabled. How can I turn it back on? Note that the keyboard backlight controls (Fn+F4 and Fn+F3) don't have any effect in this situation. I've already filed a bug, but filing a bug doesn't fix my problem. I tried this workaround posted in this bug report dealing with Acer laptops: sudo setpci -s 00:02.0 F4.B=0 However, if anything, that command makes things worse. In the general case, I can see a little bit if I'm in a dark room with a flashlight aimed just so. But after running setpci I can't see anything. And I find the setpci documentation to be utterly incomprehensible, so I don't know whether I need to tweak my command somehow or whether I'm completely barking up the wrong tree. Update: I've found a workaround: I'm now booting with the kernel parameter acpi=off. This disables power management, which prevents the machine from going into power saving mode and thus failing to come back up correctly. Of course, not having power management means that I can't use suspend or do anything to manage power other than powering it off (even then, I have to manually use the power switch). Also, it prevents me from using Unity 3D or Gnome Shell, forcing me into Unity 2C or Gnome Classic. So, I'd really like to be able to stop using this hack.

  Read the article

• Wheel rotation, to change velocity of vehicle

  - by Lewis

  I update the velocity of my vehicle like so: [v setVelocity: ((2 * 3.14 * 100 * (wheel.getRotationValue / 360) / 30)) * gameSpeed]; // update on 60 fps this gets velocity on all frames divide by 60 for 1 frame. This is done in my update method in my world class. Now wheel.getRotationValue returns the rotation value which is worked out like this: - (void)ccTouchesMoved:(NSSet *)touches withEvent:(UIEvent *)event { UITouch *touch = [touches anyObject]; CGPoint location = [touch locationInView:[touch view]]; location = [[CCDirector sharedDirector] convertToGL:location]; if (CGRectContainsPoint(wheel.boundingBox, location)) { CGPoint firstLocation = [touch previousLocationInView:[touch view]]; CGPoint location = [touch locationInView:[touch view]]; CGPoint touchingPoint = [[CCDirector sharedDirector] convertToGL:location]; CGPoint firstTouchingPoint = [[CCDirector sharedDirector] convertToGL:firstLocation]; CGPoint firstVector = ccpSub(firstTouchingPoint, wheel.position); CGFloat firstRotateAngle = -ccpToAngle(firstVector); CGFloat previousTouch = CC_RADIANS_TO_DEGREES(firstRotateAngle); CGPoint vector = ccpSub(touchingPoint, wheel.position); CGFloat rotateAngle = -ccpToAngle(vector); CGFloat currentTouch = CC_RADIANS_TO_DEGREES(rotateAngle); float limit = 0.5; rotationValue += (currentTouch - previousTouch) * limit; } touching = YES; } Say I steer the vehicle to the far right of the screen, and want to move it to the far left, It wont start moving to the left of the screen until the rotationValue is past 0 degrees again (the wheel is in its center posistion) and is dragged past this value. Is there anyway to change the code I have above, so that movement on the wheel is recognised instantly and updates the velocity of v instantly too?

  Read the article

• Google Image Search Quick Fix

  - by Asian Angel

  Are you tired of unneeded webpage loading and extra link clicking just to access an image found using Google Image Search? Now you can jump directly to the image itself with the clickGOOGLEview extension for Google Chrome. The Problem When you find an image that you like using Google Image Search you always have to go through extra hassle just to get to the image itself. First you have an entire webpage loading in your browser and then you have to click through that irritating “See full size image” link. All that you need is the image, right? Problem Fixed Once you have installed the clickGOOGLEview extension you will absolutely love the result. Find an image that you like, click the link, and there is your new image without any of the hassle or extra link clicking. Big or small having direct access to the image is how it should have been from the beginning. Conclusion The clickGOOGLEview extension does one thing and does it extremely well…it gets you to those images without the extra hassle or additional link clicking. Links Download the clickGOOGLEview extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Make Firefox Quick Search Use Google’s Beta Search KeysChange Internet Explorer in Windows Vista to Search Google by DefaultMake Firefox Built-In Search Box Use Google’s Experimental Search KeysQuick Tip: Show PageRank in Firefox while Google Toolbar is HiddenQuick Tip: Use Google Talk Sidebar in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher

  Read the article

• Is Play Framework good for doing some logic parallely?

  - by pmichna

  I'm going to build a web application that's going to host urban games. A user visits my website, clicks "Start game" and starts receiving some SMS messages when gets to some location and has to answer them to get points. My question: is Play suitable for this kind of application? From what I've read I know for sure it's ok for traditional web applications: user interface for same data storage and manipulation. But what if after clicking the "start button" some logic has to go on its own course? How would I handle parallely checking geolocation of the players (I have API for that)? I guess in some threads that would ping them every ~5 sec. and do some processing but is it possible to just "disconnect" them from the main user interface? So to sum up: I want an application written in Play that starts a separate thread for a game after clicking "start game" and other users are able to view their data (statisctics etc.), while the threads work their way with the game logic. I found something like jobs but they are documented for version 1.2 (current one is 2.2). Sorry for my somewhat fuzzy explenation, I tried to do my best.

  Read the article

• Unable to start lightdm but can startx

  - by wzyboy

  I am trying to make my own Live USB and I have successfully generated an ISO file with a newly installed, configured and customized Xubuntu 12.04 LTS installation. My problem is that, no matter I boot the ISO in VirtualBox or in GRUB with loopback, it just cannot start the lightdm. When booting, I can see the log messages on the screen, it stucks at Stopping System V compablities or Configuring Network security. And tty7 is frozen... If I switch to tty1, I can get a logged-in shell as ubuntu@ubuntu. The weird thing is: When I type sudo start lightdm or just sudo lightdm, it will switch to tty7 and the screen flashes. Then nothing happened. Return to tty1 and I can see lightdm running, process xxxx. But the process does not exist. It was just crashed immediately I think. (That's why the screen flashes.) However, when I type startx, I can get into the desktop! That's amazing for me. I am not very clear about the relationship between X Server and Display Manager, but I think lightdm is running when I see the desktop! Then, what's wrong with sudo start lightdm? I use this command every time I power on my laptop since I have a text parameter added in grub.cfg. It never "crashed immediately". I need to use sudo start lightdm because it gets me into "Xubuntu Session" instead of "Xfce Session", the prior is more beautiful... Could anyone help?

  Read the article

• How do I fix a garbled screen on a Gateway LT3103u?

  - by paracaudex

  I've been having garbled screen problems on a Gateway LT3103u on Ubuntu for a while. I just did a fresh install of Ubuntu 11.10 and continue to have issues. I installed xubuntu-desktop in case the issues had to do with the sophisticated GNOME graphics. The problem is less bad, but it's still there. After a few minutes of using XFCE, the screen gets garbled. I assume this has something to do with the graphics card, but I don't know how to go about troubleshooting something like this. Where should I start? Update: Here is the description of the VGA card from lspci -vvv: 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device 028c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- [disabled] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: radeon Kernel modules: radeon Update: Setting GRUB_CMDLINE_LINUX="nomodeset" in /etc/default/grub seems to have fixed it in both Ubuntu and xubuntu-desktop. I will test it for a day or so to see if the problems recur and then post more detail with some links to an explanation. Update 2: It is possible to use this fix for Nvidia card (GTX 260) when graphics is defective after 11.10 upgrade/install? First few restarts was graphic ok, then after few restarts begins suddenly be defective and it stay so. I must returned to 11.04 because this problem and I wait for 12.04. So I hope in this fix.

  Read the article

• Is there a Source Insight alternative?

  - by hansioux

  I am not a developer, but for my work I trace a lot of codes. It is actually rather difficult reading other people's code, especially for bigger projects. Source Insight is a great application that stores all the symbols in a data base, so you can see a new function being called, click on it and see how the function is written. You can see all the referrer of a object or jump to a caller. You don't need to break the train of thought and think up shell commands just to find these things every time you ran into a new variable/structure/function from some other files. I have it running on WINE, but there are little glitches that sometimes gets in the way. I know people will mention C-scope, I've tried it, but it really isn't the same. So, with so many huge open source projects out there for Ubuntu, are there native tools to help read them efficiently? EDIT: Thanks for the suggestions, but does CODE::BLOCKS or CodeLite provide abilities to see the function that the mouse clicked on without jumping to it, so I can see the caller and callee at the same time?

  Read the article

• sp_ssiscatalog v1.0.1.0 now available for download

  - by jamiet

  13 days ago I wrote a blog post entitled Introducing sp_ssiscatalog (v1.0.0.0) in which I first made mention of sp_ssiscatalog, an open source stored procedure intended to make it easy to query the SSIS Catalog. I have been working on some enhancements since then and hence v1.0.1.0 is now available for download from Codeplex. What’s new in this release This release includes the following enhancements: [execution_id] now gets returned in a call to EXEC [dbo].[sp_ssiscatalog] @operation_type='exec'; Filter events by specifying packages to ignore EXEC [dbo].[sp_ssiscatalog] @operation_type='exec',@exec_events_packagesexcluded='SomePackage.dtsx,AnotherPackage.dtsx'; [event_message_id] is now returned in a list of events List of executions can now be filtered via a minimum and maximum execution_id EXEC [dbo].[sp_ssiscatalog] @operation_type='execs',@execs_minimum_execution_id=198,@execs_maximum_execution_id=201 Events resultsets now have a field, [event_message_context_xml] that contains an XML document containing all [event_message_context] info (if any exists) Installation instructions Download the zip file at DB v1.0.1.0. It contains two files, SsisReportingPack.dacpac & SSISDB.dacpac Unzip to a folder of your choosing Open a command prompt and change to the directory into which you unzipped the files Execute: "%PROGRAMFILES(x86)%\Microsoft SQL Server\110\DAC\bin\sqlpackage.exe" /a:Publish /tdn:SsisReportingPack /sf:SSISReportingPack.dacpac /v:SSISDB=SSISDB /tsn:(local) (/tsn specifies the target server. Change as appropriate.) If everything works OK you’ll see something like the following: or depending on whether the target database already exists or not This will create a database called [SsisReportingPack] which contains [dbo].[sp_ssiscatalog] Feedback is welcomed! @Jamiet

  Read the article

• 12.04, nvidia-settings makes one of my dual monitors grey and useless, disables network

  - by Kerrick

  I'm running Ubuntu 12.04 64-bit, Precise Pangolin, with a PNY GTS 250 1GB video card and a monitor plugged into each of the DVI ports. I'm using the proprietary drivers (post-release updates). If I set anything to do with Separate X Screens up in nvidia-settings (and write it to xorg.conf and reboot), my second monitor has a grey background, no menu bar, no ability to have a window on it, the second monitor doesn't get picked up in a screneshot, and if I move my mouse cursor to it it's an ugly black X. Plus, my network is unable to connect to anything. If I subsequently delete /etc/X11/xorg.conf and reboot, everything goes back to working, albeit with a single monitor activated. If I set anything to do with TwinView up in nvidia-settings, my second monitor starts working, but it isn't seen as a second monitor by Ubuntu, so I can't apply color calibration to it separately. Plus, my mouse gets "caught" between the monitors every time I try to move my cursor between the two. What gives? If it helps, this is the xorg.conf that nvidia-settings generates for Separate X Screens.

  Read the article

• Cat 6 Only 100mbit speed

  - by Stu2000

  I tried two different cat6 cables directly connected between my two ubuntu machines. This one I ordered online: http://www.amazon.co.uk/gp/product/B002SQPDXS/ref=wms_ohs_product only achieves 100mbit speeds, but does appear to be supporting cross-talk (direct pc to pc), the other cat 6 cable, worked perfectly and gets the full 1gigabit speed. Both tests were performed using ftp and checking the network monitor with direct pc to pc connection. Did the product from amazon lie to me or do I need to manually set a setting somewhere in ubuntu for some cables? I had thought 10 quid for 20m of gigabit ethernet cable was a bit cheap, you get what you pay for... Regards, Stu Update: It seems that after rebooting, the device is set to 1000mbit sec when looking it up with sudo ethtool eth0 However after a while, this will drop down to just 100, after which to reset it to 1000 again, I have to reboot, and simply unpugging and re-plugging in the cable doesn't do it. I tried setting this in networking config file as suggested here: auto eth0 iface eth0 inet static pre-up /usr/sbin/ethtool -s eth0 speed 1000 duplex full but that resulted in my networking failing to start. Is there a problem with my 'auto-negotiation' or something? Can I manually override a setting to 1000mbit?

  Read the article

• Collision detection code style

  - by Marian Ivanov

  Not only there are two useful broad-phase algorithms and a lot of useful narrowphase algorithms, there are also multiple code styles. Arrays vs. calling Make an array of broadphase checks, then filter them with narrowphase checks, then resolve them. function resolveCollisions(thingyStructure * a,thingyStructure * b,int index){ possibleCollisions = getPossibleCollisions(b,a->get(index)); for(i=0; i<possibleCollitionsNumber; i++){ if(narrowphase(possibleCollisions[i],a[index])) { collisions->push(possibleCollisions[i]); }; }; for(i=0; i<collitionsNumber; i++){ //CODE FOR RESOLUTION }; }; Make the broadphase call the narrowphase, and the narrowphase call the resolution function resolveCollisions(thingyStructure * a,thingyStructure * b,int index){ broadphase(b,a->get(index)); }; function broadphase(thingy * with, thingy * what){ while(blah){ //blahcode narrowphase(what,collidingThing); }; }; Events vs. in-the-loop Fire an event. This abstracts the check away, but it's trickier to make an equal interaction. a[index] -> collisionEvent(eventdata); //much later int collisionEvent(eventdata){ //resolution gets here } Resolve the collision inside the loop. This glues narrowphase and resolution into one layer. if(narrowphase(possibleCollisions[i],a[index])) { //CODE GOES HERE }; The questions are: Which of the first two is better, and how am I supposed to make a zero-sum Newtonian interaction under B1.

  Read the article

• Dark screen when wake / Unable to control screen brightness

  - by John

  Running Ubuntu 11.04 on Lenovo ThinkPad with an Nvida graphics card. The unit goes to sleep when the lid is shut. (The unit goes to suspend mode (not to disk/hibernate), AC gets turned off, running on battery) Upon lid-open sometimes the screen is almost too dark to read. I'm really not sure of the exact cause, (very low batt??). The only fix is a reboot. The screen brightness buttons have never worked in Ubuntu. I have messed w/ the power management preferences. No change. At one point I messed w/ the gnome settings. No change. I have tried a few cmds: echo 9>/sys/class/backlight/acpi_video0/brightness setpci -s 00:02.0 F4.B=10 xgamma -gamma .75 None of these help. Most have zero effect. I think it is and acpi thing, but that is just a guess. I'm out of idea's, and looking for suggestions. Thanks

  Read the article

• Current SPARC Architectures

  - by Darryl Gove

  Different generations of SPARC processors implement different architectures. The architecture that the compiler targets is controlled implicitly by the -xtarget flag and explicitly by the -arch flag. If an application targets a recent architecture, then the compiler gets to play with all the instructions that the new architecture provides. The downside is that the application won't work on older processors that don't have the new instructions. So for developer's there is a trade-off between performance and portability. The way we have solved this in the compiler is to assume a "generic" architecture, and we've made this the default behaviour of the compiler. The only flag that doesn't make this assumption is -fast which tells the compiler to assume that the build machine is also the deployment machine - so the compiler can use all the instructions that the build machine provides. The -xtarget=generic flag tells the compiler explicitly to use this generic model. We work hard on making generic code work well across all processors. So in most cases this is a very good choice. It is also of interest to know what processors support the various architectures. The following Venn diagram attempts to show this: A textual description is as follows: The T1 and T2 processors, in addition to most other SPARC processors that were shipped in the last 10+ years supported V9b, or sparcvis2. The SPARC64 processors from Fujitsu, used in the M-series machines, added support for the floating point multiply accumulate instruction in the sparcfmaf architecture. Support for this instruction also appeared in the T3 - this is called sparcvis3 Later SPARC64 processors added the integer multiply accumulate instruction, this architecture is sparcima. Finally the T4 includes support for both the integer and floating point multiply accumulate instructions in the sparc4 architecture. So the conclusion should be: Floating point multiply accumulate is supported in both the T-series and M-series machines, so it should be a relatively safe bet to start using it. The T4 is a very good machine to deploy to because it supports all the current instruction sets.

  Read the article

• Ubuntu boot problem/unity failure

  - by Kenny

  So here I am sitting in a big pile of muck...over the last 2 days things have just been going from bad to worse with version of Ubuntu 12.10. So 2 days ago I was fiddling around with kismet and airmon-ng. I had added a bunch of libraries, I remember adding GTK+, Glib, Pango, etc. After restarting the other day my desktop opened fine but my background was changed to the default and none of my files on the desktop were visible and the top bar and side bar were not visible or functioning. The window managers were still working. I then tried reinstalling my nvidia drivers to see if that would change anything, it did not. Then after doing some searching online I found something that suggested I try deleting the file "libgtk-3.so.0". I deleted this and tried to restart the computer. Upon restart, I was greeted by a black screen with some writing saying something about -starting clamAV [OK] -problem with Apache Server could not verify correct...something... - checking battery state [ok]. After it gets to battery state it just stops and sits there indefinitely. So to sum, I cannot login to ubuntu because it just sits at this black screeen. If anyone has any idea as to what is going on and how to fix it please let me know. Thanks!

  Read the article

• What is a user-friendly solution to editing email templates with replacement variables?

  - by Daniel Magliola

  I'm working on a system where we rely a lot of "admins / managers" emailing users from the database. One of the key features is being able to email several people at the same time, with specific information relevant to each of them. Another key feature is to be able to hand-craft emails, because it tends to be be necessary to slightly modify them each time, but having a basic template saves a lot of time. For this, we have the typical "templates" solution, where we have a template that looks kind of like this: Hello {{recipient.full_name}}, Your application to {{activity.title}} has been accepted. You have requested to participate on dates {{application.dates}}, in role {{application.role}} Blah blah blah The problem we are having is obviously that (as we expected), managers don't get the whole "variables" idea, and they do things like overwriting them, which doesn't let them email more than one person at a time, assuming those are not going to get replaced and that the system is broken, or even inexplicable things like "Hello {{John}}". The big problem is that this isn't relegated, as usual, to an "admin" section where only a few power users have access to editing the templates that are automatically send out, and they're expected to know what they are doing. Every user of the system gets exposed to this problem. The obvious solution would be to replace the variables before showing this template for the user to edit, but that doesn't work when emailing several people. This seems like a reasonably common problem, and we are kind of hoping that someone has already solved it. Have you seen anywhere/created/can think of good solutions to this problem?

  Read the article

• 12.04 LTS boot hangs at "SP5100 TCO timer: mmio address 0xfec000f0 already in use", didn't yesterday

  - by DarkIron112

  Dual-booting Windows 7 and Ubuntu 12.04 LTS. I went to reboot from Win to Ubu, and found a few interesting things. My POST screen is covered in blocks of epileptic colors until I hit GRUB, which continues when I try to boot into Ubuntu. These color blocks don't appear when I use my on-board VGA, so I'll just attribute to that. Grub dimensions are swapped (card vs onboard, probably), but, when interfacing with onboard VGA, the Grub Timeout Counter works and when using my card, it does not (see "[!!!]" below for more information) Booting into Ubuntu directly causes the error: SP5100 TCO timer: mmio address 0xfec000f0 already in use Booting into recovery mode, meanwhile, and then "resuming normal boot" gets me to the desktop without native 1440x900 resolution and graphic drivers can't tell the monitor it's looking at (I assume this is because it's not a full graphic boot, and as it says, some drivers won't run?) [!!!] When I reboot after going into recovery mode, the countdown timer works ONCE, puts me back into default ubuntu boot, and then does not work again until after another recovery-mode boot. Windows 7 can boot perfectly with no issues whatsoever from epilepsy color blocks or driver detection. This makes me wonder /why/ the POST screen can't handle my video card anymore. Amidst all the diagnostics, I opened my case and re-seated the videocard securely, ensuring it wasn't a loose connection-- But this did nothing to help me. Hardware I am running an NVidia GeForce GTX 8800 video card in a PCI slot. I have 4.8GiB memory, an AMD Athlon II Quad-core 640 Processor, on an MSI K9N6GM Series Mobo. Onboard video is an NVidia GeForce MCP61(V/S/P) card. Note: I did not have any of these problems yesterday, and I have been using Ubuntu intensively for a week, though it's been working flawlessly for months. I've recently been using it to mod my Android phone, perhaps I messed something up in the file system?

  Read the article

• Dev Lead Job opening on my team

  My product unit (Parallel Developer Tools) is hiring a developer lead here in Redmond. This position is specifically on the debugger feature team that I "Program Manage".So, if you have what it takes and don't mind working with me every single day, click on the link below to read more and apply. You can also send me your resume and I'll make sure it gets to the right place and that you get a prompt response.There is a very long job description on the Microsoft careers site under job id 707388.Here is an excerpt from the middle (emphasis mine):"...We are in search of a talented and innovative senior lead software design engineer to own development of the debugging tools for data parallelism (including GP-GPU) and HPC Clusters being built by our team.To be successful, you need to be able to guide careers, design and architect well, communicate and share the best development practices, collaborate with your peers, contribute to the vision, and code significant portions of the solution. We want to hear from you if you're passionate about making your mark in the parallel development space, improving people, and building world-class tools."Responsibilities include:Managing a team of senior and junior developersDesign and coding high-quality software..."For the full background story, requirements, qualifications and responsibilities please visit the official page. Comments about this post welcome at the original blog.

  Read the article

• Breaking The Promise of Web Service Interoperability

  The promise of web service interoperability is achievable if certain technical and non-technical issues are dealt with properly. As the world gets smaller and smaller thanks to our growing global economy the need for security is increasing. The use of security is vital in the transferring of data from one server to another. As new security standards and protocols are created, the environments for web service hosts and clients must be in sync so that they can communicate on the same standard and protocols. For example, if a new protocol x can only be implemented on computers built after 2010 then all computers built prior to 2010 will not be able to connect to any web service hosts that only use this protocol in its security policy. If both the host and client of a web service cannot communicate using a set of common standards and protocols then web services are not available to these clients thus breaking the promise of interoperability. Another limiting factor of web services is governmental policies and regulations. I have experienced this first hand last year when I had to work on a project that dealt with personally identifiable information (PII) regarding US and Canadian Citizens. Currently the Canadian government regulates that any data pertaining to Canadian citizens must be store in Canada only. The issue that we had was that fact that we are a US based company that sometimes works with Canadian PII as part of a service that we provide. As you can see we are US based company and dealing with Canadian Data, so we had to place a file server inside the border of Canada in order for us to continue working for our Canadian customers.

  Read the article

• Order in which passphrase is asked for encrypted volumes

  - by Lars Kotthoff

  I have installed 12.10 on a machine with two disks. The root partition is on one disk, the swap partition on the other. Both disks are encrypted and I have added the corresponding entries to /etc/crypttab. During boot, it asks for the passphrase for the disk with the root filesystem. Then it continues booting and gets to the login screen before I get a chance to enter the passphrase for the other disk. After logging in, I verified that it was actually waiting for me to enter the passphrase for that second partition (askpass process is running). But at that point, I have no way of entering the passphrase anymore. The manpage for crypttab suggests that the order in which the volumes are specified matters, so I changed it to have the swap disk first. I updated the initramfs and grub afterwards, but it didn't make any difference. How can I specify the order in which the encrypted partitions are unlocked? I'm looking for a solution that either asks for the swap passphrase first or tells the system to wait until all encrypted partitions are unlocked before displaying the login screen.

  Read the article

• Cannot restart Ubuntu after replacing Unity with Gnome and purging lightdm

  - by OtagoHarbour

  I am running Ubuntu 11.10. I used the directions here to replace Unity with Gnome. It seemed to work fine until the end of step 2 when I rebooted the computer. When I chose the default option, I just got a black screen. When I choose the restore option and then "Restore normal boot" I get Starting load fallback graphics devices [fail] Starting GNOME Display Manager [ok] Starting Userspace bootsplash [ok] Stopping GNOME Display Manager [ok] Stopping Userspace bootsplash [ok] Starting web server apach22 [fail] (among a lot of OKs) It finally gets to Stopping System V runlevel compatibility [ok] where it hangs. I left it overnight and just had a blank screen when I checked it in the morning. I can "Drop to root shell prompt" and "Drop to root shell prompt with networking". I did see here that one should be able to fix the problem by choosing remount and then doing apt-get install lightdm I tried this as root shell with and without networking and got the message Err http://us.archive.ubuntu.com/ubuntu/ oneric-updates/main lightdm i386 1.0.6-0ubuntu1.7 Could not resolve 'us.archive.ubuntu.com/ubuntu' What is the best way to resolve this problem? Thanks, Peter.

  Read the article

• Obstacle Avoidance steering behavior: how can an entity avoid an obstacle while other forces are acting on the entity?

  - by Prog

  I'm trying to implement the Obstacle Avoidance steering behavior in my 2D game. Currently my approach is to apply a force on the entity, in the direction of the normal of the heading, scaled by a number that gets bigger the closer we are to the obstacle. This is supposed to push the entity to the side and avoid the obstacle that blocks it's way. However, in the same time that my entity tries to avoid an obstacle, it Seeks to a point more or less behind the obstacle (which is the reason it needs to avoid the obstacle in the first place). The Seek algorithm constantly applies a force on the entity that pushes it (more or less) in the direction of the obstacle, while the Obstacle Avoidance algorithm constantly applies a force that pushes the entity away (more accurately, to the side) of the obstacle. The result is that sometimes the entity succesfully avoids the obstacle, and sometimes it collides with it, depending on the strength of the avoidance force I'm applying. How can I make sure that a force will succeed in steering the entity in some direction, while other forces are currently acting on the entity? (And while still looking natural). I can't allow entities to collide with obstacles when realistically they should be able to easily avoid them, doesn't matter what they're currently doing. Also, the Obstacle Avoidance algorithm is made exactly for the case where another force is acting on the entity. Otherwise it wouldn't be moving and there would be no need to avoid anything. So maybe I'm missing something. Thanks

  Read the article

• C++ Numerical Recipes &ndash; A New Adventure!

  - by JoshReuben

  I am about to embark on a great journey – over the next 6 weeks I plan to read through C++ Numerical Recipes 3rd edition http://amzn.to/YtdpkS I'll be reading this with an eye to C++ AMP, thinking about implementing the suitable subset (non-recursive, additive, commutative) to run on the GPU. APIs supporting HPC, GPGPU or MapReduce are all useful – providing you have the ability to choose the correct algorithm to leverage on them. I really think this is the most fascinating area of programming – a lot more exciting than LOB CRUD !!! When you think about it , everything is a function – we categorize & we extrapolate. As abstractions get higher & less leaky, sooner or later information systems programming will become a non-programmer task – you will be using WYSIWYG designers to build: GUIs MVVM service mapping & virtualization workflows ORM Entity relations In the data source SharePoint / LightSwitch are not there yet, but every iteration gets closer. For information workers, managed code is a race to the bottom. As MS futures are a bit shaky right now, the provider agnostic nature & higher barriers of entry of both C++ & Numerical Analysis seem like a rational choice to me. Its also fascinating – stepping outside the box. This is not the first time I've delved into numerical analysis. 6 months ago I read Numerical methods with Applications, which can be found for free online: http://nm.mathforcollege.com/ 2 years ago I learned the .NET Extreme Optimization library www.extremeoptimization.com – not bad 2.5 years ago I read Schaums Numerical Analysis book http://amzn.to/V5yuLI - not an easy read, as topics jump back & forth across chapters: 3 years ago I read Practical Numerical Methods with C# http://amzn.to/V5yCL9 (which is a toy learning language for this kind of stuff) I also read through AI a Modern Approach 3rd edition END to END http://amzn.to/V5yQSp - this took me a few years but was the most rewarding experience. I'll post progress updates – see you on the other side !

  Read the article

• Why the R# Method Group Refactoring is Evil

  - by Liam McLennan

  The refactoring I’m talking about is recommended by resharper when it sees a lambda that consists entirely of a method call that is passed the object that is the parameter to the lambda. Here is an example: public class IWishIWasAScriptingLanguage { public void SoIWouldntNeedAllThisJunk() { (new List<int> {1, 2, 3, 4}).Select(n => IsEven(n)); } private bool IsEven(int number) { return number%2 == 0; } } When resharper gets to n => IsEven(n) it underlines the lambda with a green squiggly telling me that the code can be replaced with a method group. If I apply the refactoring the code becomes: public class IWishIWasAScriptingLanguage { public void SoIWouldntNeedAllThisJunk() { (new List<int> {1, 2, 3, 4}).Select(IsEven); } private bool IsEven(int number) { return number%2 == 0; } } The method group syntax implies that the lambda’s parameter is the same as the IsEven method’s parameter. So a readable, explicit syntax has been replaced with an obfuscated, implicit syntax. That is why the method group refactoring is evil.

  Read the article

• nvidia-settings makes one of my dual monitors grey and useless, disables network

  - by Kerrick

  I'm running Ubuntu 12.04 64-bit, Precise Pangolin, with a PNY GTS 250 1GB video card and a monitor plugged into each of the DVI ports. I'm using the proprietary drivers (post-release updates). If I set anything to do with Separate X Screens up in nvidia-settings (and write it to xorg.conf and reboot), my second monitor has a grey background, no menu bar, no ability to have a window on it, the second monitor doesn't get picked up in a screneshot, and if I move my mouse cursor to it it's an ugly black X. Plus, my network is unable to connect to anything. If I subsequently delete /etc/X11/xorg.conf and reboot, everything goes back to working, albeit with a single monitor activated. If I set anything to do with TwinView up in nvidia-settings, my second monitor starts working, but it isn't seen as a second monitor by Ubuntu, so I can't apply color calibration to it separately. Plus, my mouse gets "caught" between the monitors every time I try to move my cursor between the two. What gives? If it helps, this is the xorg.conf that nvidia-settings generates for Separate X Screens.

  Read the article

• GWB | Comment Spam On The Rise

  - by Geekswithblogs Administrator

  I don’t know a member on Geekswithblogs.net that is not frustrated with the amount of spam they get. It is a major problem that we have been dealing with for 6+ years and trying to come up with new ways to fight. As spammers get smarter, we have to continue to upgrade the tools we use to combat it. Just like any spam filter, sometimes good comments will get caught up. This has been a huge concern for some bloggers causing us to tame what we call spam and not spam. So this post is here just to state we know the spam problem is like a wave, sometimes it is not so bad, other times it gets worse. Right now it is worse. One measure we will take is a requirement for CAPTCHA soon if it continues since most members don’t clean up their spam via the admin tools (which are not the best tools, I know). Also I want to solicit a better approach from the members, what would you like the spam interface on GWB to be like? Be realistic cause we all want “Zero Spam, Good Comment live”. Related Tags: Geekswithblogs.net, Spam

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >