Search Results

Search found 7551 results on 303 pages for 'pre optimization'.

Page 198/303 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

• ASA 5540 v8.4(3) vpn to ASA 5505 v8.2(5), tunnel up but I cant ping from 5505 to IP on other side

  - by user223833

  I am having problems pinging from a 5505(remote) to IP 10.160.70.10 in the network behind the 5540(HQ side). 5505 inside IP: 10.56.0.1 Out: 71.43.109.226 5540 Inside: 10.1.0.8 out: 64.129.214.27 I Can ping from 5540 to 5505 inside 10.56.0.1. I also ran ASDM packet tracer in both directions, it is ok from 5540 to 5505, but drops the packet from 5505 to 5540. It gets through the ACL and dies at the NAT. Here is the 5505 config, I am sure it is something simple I am missing. ASA Version 8.2(5) ! hostname ASA-CITYSOUTHDEPOT domain-name rngint.net names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 10.56.0.1 255.255.0.0 ! interface Vlan2 nameif outside security-level 0 ip address 71.43.109.226 255.255.255.252 ! banner motd ***ASA-CITYSOUTHDEPOT*** banner asdm CITY SOUTH DEPOT ASA5505 ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name rngint.net access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.1.0.125 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.160.70.10 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 host 10.1.0.125 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 10.106.70.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 25000 logging buffered informational logging asdm warnings mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 71.43.109.225 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ (inside) host 10.106.70.36 key ***** aaa authentication http console LOCAL aaa authentication ssh console LOCAL aaa authorization exec authentication-server http server enable http 192.168.1.0 255.255.255.0 inside http 10.0.0.0 255.0.0.0 inside http 0.0.0.0 0.0.0.0 outside snmp-server host inside 10.106.70.7 community ***** no snmp-server location no snmp-server contact snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs group1 crypto map outside_map 1 set peer 64.129.214.27 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh 10.0.0.0 255.0.0.0 inside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 console timeout 0 management-access inside dhcpd auto_config outside ! dhcpd address 10.56.0.100-10.56.0.121 inside dhcpd dns 10.1.0.125 interface inside dhcpd auto_config outside interface inside ! dhcprelay server 10.1.0.125 outside dhcprelay enable inside dhcprelay setroute inside dhcprelay timeout 60 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept tftp-server inside 10.1.1.25 CITYSOUTHDEPOT-ASA-Confg webvpn tunnel-group 64.129.214.27 type ipsec-l2l tunnel-group 64.129.214.27 ipsec-attributes pre-shared-key ***** ! ! prompt hostname context

  Read the article

• Windows 7 Install command prompt can't access the C drive

  - by theouteredge

  I'm trying to create a new Windows 7 Professional VHD which I can dual boot to, following Scott Hanselman's guide to creating a bootable VHD. When I get to the command prompt in the Windows 7 installation and try to create a VHD or select/attach a pre-created VHD file I get an error saying that diskpart can't find the path specified. If I try and switch to the c drive using cd c: I see c:\ x:\something\> I already have a Windows 7 Ultimate install and my C drive is an SSD – if that makes a difference.

  Read the article

• Unable chage IP address for eth0 without restart in Ubunto

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I try to change IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4: auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status Now I issue: sudo service networking restart I have response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart IP changing... Any ideas?

  Read the article

• Visual Studio Express 2012 - Moving items to tab control loses actions

  - by JohnP

  VS 2012 Express on Windows 7 Professional, this was pre SP1 install. I have a windows form that I had several elements (Listboxes, buttons, text and labels), with some actions associated with changing indices on the list boxes and of course the button actions. I decided I wanted to add a tab control to enable a second tab with a different feature set, so I copied/cut/pasted all of the original items to a tab control that I added. When I did this, all of the elements lost their click action in the events window. I had to go and re-associate all of them. Is this a normal behavior/known issue, or is there some method to move controls that I am not aware of?

  Read the article

• Incremental Compilation in Eclipse. ASTNode-s and SVN versioning

  - by Alex

  Hi there, I am building up some statistics after analyzing the source code in eclipse. But the overall process is too slow because i rebuild my model every time from scratch after each compilation. I am looking for a way to get only the changed parts of the code (as ASTNodes) and to rebuild just that part of my model. I suppose that even the changed compilation units and not the exact code elements would be enough after the user compiles and still would be a nice optimization. I am sure eclipse is capable of knowing what code elements are changed (and even to know their semantics), because when I use the subclipse plugin my changes are ordered by a code element (an import, a method, a variable declaration, etc). Well.. at least that plugin is capable of knowing that info. Thanks in advance

  Read the article

• Why do debug symbols so adversely affect the performance of threaded applications on Linux?

  - by fluffels

  Hi. I'm writing a ray tracer. Recently, I added threading to the program to exploit the additional cores on my i5 Quad Core. In a weird turn of events the debug version of the application is now running slower, but the optimized build is running faster than before I added threading. I'm passing the "-g -pg" flags to gcc for the debug build and the "-O3" flag for the optimized build. Host system: Ubuntu Linux 10.4 AMD64. I know that debug symbols add significant overhead to the program, but the relative performance has always been maintained. I.e. a faster algorithm will always run faster in both debug and optimization builds. Any idea why I'm seeing this behavior?

  Read the article

• Windows 7 Enterprise, Service Pack 1. Software MS Office Excel 2010

  - by user327560

  In Excel I understand there is no mechanism to customise & re-label the Rows & Columns (i.e. Renaming Col. A to some text like "Item Number" and so on. My question is regarding if it's possible to start Row Numbering at zero, or to determine a pre-allocated number of rows which contain my Headers, and then the first Row with the detail is infact seen as Row 1? Reason for question is I work multiple INternational Projects and we use Excel to trsack alot of activities & issues. Oddly, many people will refer to, for example "Point 7"... Some people mean the ID 7 (which I have the first Column dedicated to ID Number), some mean Excel Row 7, which infact could be really ID 3, or 4 from Col. A.... Any easy way or workaround to just use the Excel Row Numbers but select from when Row 1 is counted?

  Read the article

• Is a low voltage licence needed to install network cable?

  - by BCS

  In some places in the US you need a "low voltage licence" to install "low voltage wiring" but I can't seem to find anything that says if this includes network wiring. (I know this will differ from place to place so please state where you are referring to.) Does the law say you need a licence? Does anyone pay attention to it? Are their any exception you known of? How sure are you of your information? Got any links? "Me specific" parts of the question. p.s. I'm looking for info on Idaho, USA but answerers for anywhere welcome. edit: I have some formal training in this and am completely confident that I can do it safely and correctly. However the training was pre-2008 befor Idaho switched to the national building code.

  Read the article

• Where is the chink in Google Chrome's armor?

  - by kudlur

  While browsing with Chrome, I noticed that it responds extremely fast (in comparison with IE and Firefox on my laptop) in terms of rendering pages, including JavaScript heavy sites like gmail. This is what googlebook on Chrome has to say tabs are hosted in process rather than thread. compile javascript using V8 engine as opposed to interpreting. Introduce new virtual machine to support javascript heavy apps introduce "hidden class transitions" and apply dynamic optimization to speed up things. Replace inefficient "Conservative garbage colllection" scheme with more precise garbage collection scheme. Introduce their own task scheduler and memory manager to manage the browser environment. All this sounds so familiar, and Microsoft has been doing such things for long time.. Windows os, C++, C# etc compilers, CLR, and so on. So why isn't Microsoft or any other browser vendor taking Chrome's approach? Is there a flaw in Chrome's approach? If not, is the rest of browser vendor community caught unaware with Google's approach?

  Read the article

• 64 bit Windows 7 + 32 bit windows XP dual boot?

  - by Mick

  I have purchased an i7 based PC pre-installed with 64 bit windows 7 (home premium). Unfortunately some third party 32 bit software that I need to use is not working properly (see stackoverflow.com for details). I am now torn between the plan of installing windows XP 32 bit or making it dual boot. Which option do you think will give me the least problems? And if the answer is dual boot, then can you point me to a good guide for how to do it, preferably a guide specifically for my two OS's created in this order (i.e. 7x64 first). EDIT: the performance of my 32bit programs is critical so am concerned about any kind of 32bit XP "emulation".

  Read the article

• How badly do SSDs degrade without TRIM?

  - by joev

  SSDs have been out for a few years, and have seen all kinds of usage patterns. Windows and Linux support the TRIM command, with Mac OS still trailing behind here. Update (2 Aug 2011): It appears OSX Lion has support for TRIM in Apple-branded SSDs. There is a utility that enables TRIM in non-Apple SSDs I'm sure plenty of Mac users (and pre-TRIM version of Win/Linux) have SSDs. So, to you folks: have you noticed a degradation of SSD performance during its lifetime? How long have you been using the SSD, and how bad is the degradation? I'm assuming that even at its most degraded state, a modern SSD would still smoke a traditional hard drive in terms of performance.

  Read the article

• Input multiple file names in windows open file dialog box

  - by goodiet

  Windows 7 allows you to select multiple files to open at once by using ctrl or shift key. The "File Name" input field at the bottom of the dialog box would auto populate with the following sample: "aaa.txt" "bbb.txt" "ccc.txt" "ddd.txt" I have 14,000 files in a folder and I only need a range of files (approx 500). When I use the shift key to select a range of files, the "File Name" field auto populates all 500 file names. Windows would cut me off at the 260th character when I try to paste in a pre-generated string into the "File Name" field. Is there a way to bypass the 260 character limit so it would accept my entire string with 500 file names?

  Read the article

• Create an seo and web accessibility analyzer

  - by rebellion

  I'm thinking of making a little web tool for analyzing the search engine optimization and web accessiblity of a whole website. First of all, this is just a private tool for now. Crawling a whole website takes up alot of resources and time. I've found out that wget is the best option for downloading the markup for a whole site. I plan on using PHP/MySQL (maybe even CodeIgniter), but I'm not quite sure if that's the right way to do it. There's always someone who recommends Python, Ruby or Perl. I only know PHP and a little bit Rails. I've also found a great HTML DOM parser class in PHP on SourceForge. But, the thing is, I need some feedback on what I should and should not do. Everything from how I should make the crawl process to what I should be checking for in regards to SEO and WCAG. So, what comes to your mind when you hear this?

  Read the article

• Cannot Login as root

  - by Josh Moore

  At my work we ship our product on pre-installed servers as a software/hardware package. We are using open SUSE 10.3 for the OS and we setup and we always log in with the root user to do maintenance on the box. Recently we just had box returned to us that the customer said the could not longer connect to the box through the network interface. So when I started to work on the box I run into the this problem: At the command prompt to login i type the user name "root" and hit enter. Then even before it asks me for a password I get "Login incorrect". I have never seen this behavior before and could not find any information about it online. Does anybody know what is going on? Thanks.

  Read the article

• What is the time taken by java to call a method in another package?

  - by satish

  I have an assignment where i need to do feasibility study on two of my approaches and find optimized one. There are two packages A and B User input is gathered in A and then sent to B for execution. Now my approaches are 1. Call B methods from package A one by one. 2. Create a common method in B and send all the input as parameters. Which is feasible and best one, I know 2 is good in terms of code optimization and less number of calls. But, I want to understand what will be the execution time difference in above approaches How much time does java take to call method in another package? Is there any default value like x nano seconds or y milli seconds. Based on the time taken I can choose the appropiate one. Thanks

  Read the article

• Visual Studio 2010: Is it possible to force editor to use ANSI rather than UTF-8?

  - by Mark Redman

  I am having issues with some files in automated processes, specifically with batch files and sql files. Visual Studio seems to create these as UTF-8 rather than ansi and adds some kind of special characters to the beginning of the file (I think this is a called a pre-amble) This breaks running batch files and running swl files through osql.exe. I have had issues myself in the past in creating text files using C#, but can get around that through encoding. However its seems a bit strange I cant use Visual studio to create batch files and sql files in a database project for automation.

  Read the article

• Thunderbird message sorting - wrong dates

  - by Unsigned

  Thunderbird 3 is having a problem with one of my IMAP accounts. When sorted by date, it displays 10-15 messages at the top (newest) when in fact they are very old message. (pre-2010, over a year old, some up to 6-7 years old) It's not game-breaking, but it is annoying, as I have to look past those to check for "new" messages. Is there any way to fix this? I'd considered re-downloading all the messages via IMAP, but that would take weeks (50,000 messages). When I open it, it displays the correct date, also when I use "View Source" the Date: header has the correct date (2009, 2006, etc). Is there any way to make Thunderbird realize that it should be sorted down with the rest of the 2006/2009 messages? None of my other IMAP accounts (many with the same host server) have this issue.

  Read the article

• Is there a difference in page fault rates between CPU bound and I/O bound processes?

  - by user198864

  I was thinking, should there be any difference in expectation of the page fault rate on CPU-bound vs I/O bound processes? At first I thought maybe we could, since CPU-bound processes would likely be using more memory accesses per time quantum, so I expect it would move from locality to locality faster. At the same time, the CPU-bound process is probably given a larger working set... but this doesn't affect the fault overhead as it hits a new locality IF this wasn't pre-paged in. Is there actually any real difference in the page fault rates or am I just musing about something nonexistent? And if there is, how would it impact a real-world OS like linux?

  Read the article

• Any way to avoid a filesort when order by is different to where clause?

  - by Julian

  I have an incredibly simple query (table type InnoDb) and EXPLAIN says that MySQL must do an extra pass to find out how to retrieve the rows in sorted order. SELECT * FROM `comments` WHERE (commentable_id = 1976) ORDER BY created_at desc LIMIT 0, 5 exact explain output: table select_type type extra possible_keys key key length ref rows comments simple ref using where; using filesort common_lookups common_lookups 5 const 89 commentable_id is indexed. Comments has nothing trick in it, just a content field. The manual suggests that if the order by is different to the where, there is no way filesort can be avoided. http://dev.mysql.com/doc/refman/5.0/en/order-by-optimization.html I also tried order by id as well as it's equivalent but makes no difference, even if I add id as an index (which I understand is not required as id is indexed implicitly in MySQL). thanks in advance for any ideas!

  Read the article

• wireless printer - entering WPA - is there a quicker way?

  - by camcam

  I have a wireless printer (Brother DCP-585CW). The wireless setup instruction says I should enter the WPA key to the printer. The key is entered using up and down buttons on the printer. So, I am supposed to enter 64 characters using up and down buttons. To enter 1 character, it takes on average (24+10)/2 = 17 times pressing the button (digits start after 24 letters). So 17*64 = 1088 times. Is there a quicker way to setup a wireless printer? Maybe there is a Windows program that discovers printers connected to computer through USB or Ethernet (my printer has both sockets) and allows to pre-configure it for wireless usage (enter the long WPA key)? Update There is BRAdmin program and it allows to set up almost all wireless settings... almost - all except WPA :(

  Read the article

• How to turn ON bluetooth in Dell Inspiron?

  - by ykombinator

  I bought a new Dell Inspiron laptop a month ago. The company had pre-installed all the required software in my laptop. As such, the bluetooth used to be switched ON whenever I switched on my machine. However, a few days later, the bluetooth stopped working. I re-started the Laptop and it was ON! Now I am facing this problem very frequently. As such, the wi-fi connection doesn't work unless the bluetooth is switched ON. The bluetooth turns ON after a few re-boots and sometimes doesn't turn ON for many days. Does anybody know any trick to keep the bluetooth ON everytime I switch ON my machine. P.S: The Dell manual did not help.

  Read the article

• how to actually install PHP etc on a windows 2003 server

  - by user1624421

  We're just purchasing a dedicated windows 2003 server (in fact I think it's a VPS) How do we actually go about installing software on to it? Simply searching for "installing PHP5 on windows server" just produces material about installing it as if one had access to the computer with a keyboard and mouse. Am I being thick? I've had experience managing a linux server before but that had everything pre-configured and we accessed it via Web Hosting Manager. I don't get the actual concept of connecting to a remote PC and...downloading files? If there's any good books available please point me in the right direction.

  Read the article

• Is there a way for one SSH config file to include another one?

  - by Joe Casadonte

  In case it matters: OS: Ubuntu 10.04 SSH: OpenSSH_5.3p1 Debian-3ubuntu5 I'd like one SSH config file to include another one. The use case would be to define whatever I want in my default .ssh/config file and then pre-pend a couple of extra things in a separate file (e.g. ~/.ssh/foo.config). I want the second file to incorporate the first one, though, so I don't have to duplicate everything in the first one. Is that doable? Thanks!

  Read the article

• Using Dynamic Proxies to centralize JPA code

  - by Daziplqa

  Hi All, Actually, This is not a question but really I need your opinions in a matter... I put his post here because I know you always active, so please don't consider this a bad question and share me your opinions. I've used Java dynamic proxies to Centralize The code of JPA that I used in a standalone mode, and Here's the dynamic proxy code: package com.forat.service; import java.lang.reflect.InvocationHandler; import java.lang.reflect.Method; import java.lang.reflect.Proxy; import java.util.logging.Level; import java.util.logging.Logger; import javax.persistence.EntityManager; import javax.persistence.EntityManagerFactory; import javax.persistence.EntityTransaction; import javax.persistence.Persistence; import com.forat.service.exceptions.DAOException; /** * Example of usage : * <pre> * OnlineFromService onfromService = * (OnlineFromService) DAOProxy.newInstance(new OnlineFormServiceImpl()); * try { * Student s = new Student(); * s.setName("Mohammed"); * s.setNationalNumber("123456"); * onfromService.addStudent(s); * }catch (Exception ex) { * System.out.println(ex.getMessage()); * } *</pre> * @author mohammed hewedy * */ public class DAOProxy implements InvocationHandler{ private Object object; private Logger logger = Logger.getLogger(this.getClass().getSimpleName()); private DAOProxy(Object object) { this.object = object; } public static Object newInstance(Object object) { return Proxy.newProxyInstance(object.getClass().getClassLoader(), object.getClass().getInterfaces(), new DAOProxy(object)); } @Override public Object invoke(Object proxy, Method method, Object[] args) throws Throwable { EntityManagerFactory emf = null; EntityManager em = null; EntityTransaction et = null; Object result = null; try { emf = Persistence.createEntityManagerFactory(Constants.UNIT_NAME); em = emf.createEntityManager();; Method entityManagerSetter = object.getClass(). getDeclaredMethod(Constants.ENTITY_MANAGER_SETTER_METHOD, EntityManager.class); entityManagerSetter.invoke(object, em); et = em.getTransaction(); et.begin(); result = method.invoke(object, args); et.commit(); return result; }catch (Exception ex) { et.rollback(); Throwable cause = ex.getCause(); logger.log(Level.SEVERE, cause.getMessage()); if (cause instanceof DAOException) throw new DAOException(cause.getMessage(), cause); else throw new RuntimeException(cause.getMessage(), cause); }finally { em.close(); emf.close(); } } } And here's the link that contains more info (http://m-hewedy.blogspot.com/2010/04/using-dynamic-proxies-to-centralize-jpa.html) (plz don't consider this as adds, as I can copy and past the entire topic here if you want that) So, Please give me your opinions. Thanks.

  Read the article

• Is there a way to ignore Cache errors in Django?

  - by Josh Smeaton

  I've just set our development Django site to use redis for a cache backend and it was all working fine. I brought down redis to see what would happen, and sure enough Django 404's due to cache backend behaviour. Either the Connection was refused, or various other errors. Is there any way to instruct Django to ignore Cache errors, and continue processing the normal way? It seems weird that caching is a performance optimization, but can bring down an entire site if it fails. I tried to write a wrapper around the backend like so: class CacheClass(redis_backend.CacheClass): """ Wraps the desired Cache, and falls back to global_settings default on init failure """ def __init__(self, server, params): try: super(CacheClass, self).__init__(server, params) except Exception: from django.core import cache as _ _.cache = _.get_cache('locmem://') But that won't work, since I'm trying to set the cache type in the call that sets the cache type. It's all a very big mess. So, is there any easy way to swallow cache errors? Or to set the default cache backend on failure?

  Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >