Search Results

Search found 14828 results on 594 pages for 'settings py'.

Page 198/594 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

  • Ubuntu 12.04.3 Graphics Issues: Broken Pipes, Reinstalled Xorg and Bumblebee

    - by user190488
    It seems I have a problem, and am only making it worse by following what I find online. I have a new Asus N550JV-D71 (not sure about the part after the dash, though I definitely know it includes 71). I decided to downgrade Windows 8 to 7, then dual boot Ubuntu 12.04 with it (there were issues with Windows 8, and I had a Windows 7 disk handy). It did work and, after installing Bumblebee in tty (because it wouldn't boot when it was first installed), it worked marvelously for a little less than a week. However, I restarted it last night and got the Could not write bytes: Broken pipes error. (I see it's a very common error, but I've looked at the majority of the suggested Similar Questions already.) I followed what I could find online, followed those instructions (making sure to not install any sort of graphics drivers other than what Bumblebee provides), and it just seems to go further and further downhill. I'm afraid I didn't write the exact steps to get to this point (it was late by the time I gave up the night before), but it involved reinstalling lightdm, xorg (and xserver?), and Bumblebee. I then changed the Bumblebee.conf file so that Device=nvidia. I'm pretty new to Linux in general (I've used it since 10.04, but I hadn't had issues up until this computer, so it let me stay a newbie), so I'm not exactly sure what log files to look at to find the errors to look up. However, I did look at lshw and noticed that displays was marked as unassigned. Also, if I try to start lightdm using the command line, it always stops at Stopping Mount network filesystems. I should note that there isn't an xorg.conf file, and no .Xauthority. I would really, really prefer not to reinstall 12.04 if possible. I managed to get grub to display only a short time ago, and I can't boot to the dvd drive unless I go into the BIOS settings and manually change the boot order (that was an issue from the beginning, before the Ubuntu install), and getting into those settings often means rebooting several times due to the fact that the window to get to it is extremely small. I have most of what I need backed up, however, in case it does get to that point. If I really have to, I can just use the latest Ubuntu version instead of the LTS, but the reason I chose 12.04 in the first place is because I need something stable-ish, and Windows isn't suitable to what I need to do. I should note that the reason I restarted last night in the first place was that it wasn't charging the battery, and the wifi kept on going out. Hardware: Nvidia GeForce GT 750M Intel HD graphics 4600

    Read the article

  • How to enable mnemonics in 12.04 and/or 14.04 GTK3?

    - by jmunsch
    Word on the street is that "gtk-enable-mnemonics" has been deprecated since version 3.10, and I am not at all sure how to get my application to display mnemonics. They will only display if I press the alt key. Please see here: http://stackoverflow.com/questions/23049406/wxpython-button-shortcut-accelerator-how-to-spam I have tried everything suggested in this article in regards to settings.ini, switching the bool to the opposite: How do I disable mnemonics in GTK3? Related: https://developer.gnome.org/gtk3/3.2/GtkSettings.html

    Read the article

  • Indicator menu require long press to open

    - by thor
    I am using 11.10 on my laptop and have a following issue: If I single click on items in notification area (or indicators), like messaging menu, sound menu, calendar, a menu appears and disappears as soon as mouse button is released. I need to do a long press then move pointer to menu area to be able to select items in it. Any clues to fix it? P.S. This is a fresh install but my home folder (thus settings) were restored from previous Ubuntu installation.

    Read the article

  • How to make gvfs-smb always use UTF8

    - by Didier
    The problem is that if I make an entry in /etc/fstab to mount a samba share I can give the option iocharset=utf8 and this then mounts the share correctly and in the right encoding with special characters displayed correctly. Gnomes automount system for some reason never gets this right and I can find nowhere to change its settings. Is there a way to make it always use UTF8 by default? This is with Ubuntu 10.10 and the system can display the characters involved.

    Read the article

  • Editing /.config/dconf/user

    - by user86322
    I am having a problem with Gnome3 (actually, I have it set to fallback mode, or Gnome 2). I have two displays and I need an X screen (I used nvidia-xconfig and nvidia-settings to do this) for each screen. However, every time I either restart X or log in, Gnome seems to be adding the objects values under /gnome/gnome-panel/layouts (ex. first time I set the two separate X screens I had clock, then log out/in, there was clock and clock1 under objects, and then log out/in there were three, clock, clock1, clock2,.......log out/in, ............30 times....clock, clock1, clock2, ......clock 42.....!! The same thing goes for top-panels, menu-bars, etc.) After a while, I found out I could remove all those using the dconf-editor, going to /gnome/gnome-panel/layouts, removing all the repetitions under fields objects-id-list and top-id-list and leaving one value of each object. This is not a solution but at least allow me to keep using Linux without so much problem. However, the problem persists every time I restart X or log in. I now finally learned about "dconf" and where the user profile settings are located (~/.config/dconf/user) and one can use "dconf" to see the keys. In my case, I need to change/remove many keys (all those clocksX, workspace-X, menu-bar-X, etc., where goes from 1 to 42 and still counting) so it's really tedious and boring to be changing one by one using "dconf write". So I found "dconf dump", which actually allow me to dump everything into a .txt file and edit the file really quick (i.e, "dconf dump / >> dump_user.txt"). The problems? Two of them: How do I "load" back "dump_user.txt" I edited into the user profile? (I read somewhere there was a "dconf reload" but reload doesn't exist as a command under "dconf") How do I stop Gnome from keep adding more objects to my desktop environment every time I log in/restart X? NOTE: The problem doesn't occur when I set the displays to use TwinView feature (i.e., the desktop is extended/shared by both displays). However, for my case I need two separate X's. Any help/suggestion would be greatly appreciated. Thanks

    Read the article

  • Nautilus and file command in 11.04 don't show metadata for WebM files

    - by Pili
    The file-name extension .webm is used for media files using the WebM multimedia format, which consists of the WebM container (a subset of the Matroska container) and audio and video streams with independet enconding and quality settings. Description of the issue: For files in the WebM format, the program file says that files are raw data, instead of determining and displaying the real file-format, which is WebM. Besides, Nautilus doesn't display the technical metadata of files in this format. Why is the file program not displaying the file format for WebM files?

    Read the article

  • 13.10 qtcreateor 271 wont work

    - by bernd feinman
    Just installed ubuntu 13.10 x86 with all updates. I then installed qt4 libraries and qt creator 271: sudo apt-get install build-essentials sudo apt-get install libqt4-dev sudi apt-get install qtcreator Both installed successfully, and i can launch qt creator, but then i get a black window when i switch to "examples" or "development": http://i.imgur.com/koi6S9S.png The windows cannot be closed. I am guessing because qtcreator somehow cannot find the qt version i installed. This is the settings page: http://i.imgur.com/OgAKH7S.png what to do?

    Read the article

  • Is it possible to determine whether my web site is being accessed as a trusted site?

    - by Sameer
    I am working on site which have a lot of configuration and security settings and I have to check either clients browser is on trusted zone or not using JavaScript. Is it possible to determine whether my web site is being accessed as a trusted site? The reason I'd like to do this is that some functions won't work unless the site is being accessed as a trusted site, and I'd like to be able to warn users. Is there any solution ?

    Read the article

  • Can't enable wifi on vaio CW ubuntu 12.04

    - by rastemoh
    I was using my wifi with no problem, but an hour ago I switched it off from system settings and then tried to turn it on again, but no success. it's about 1 month I am using it and I had no problem with WIFI except this one. I rebooted and went to windows 7, but even that OS can't turn it on!! this is rfkill list all: 0: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes

    Read the article

  • Secure Your Wireless Router: 8 Things You Can Do Right Now

    - by Chris Hoffman
    A security researcher recently discovered a backdoor in many D-Link routers, allowing anyone to access the router without knowing the username or password. This isn’t the first router security issue and won’t be the last. To protect yourself, you should ensure that your router is configured securely. This is about more than just enabling Wi-Fi encryption and not hosting an open Wi-Fi network. Disable Remote Access Routers offer a web interface, allowing you to configure them through a browser. The router runs a web server and makes this web page available when you’re on the router’s local network. However, most routers offer a “remote access” feature that allows you to access this web interface from anywhere in the world. Even if you set a username and password, if you have a D-Link router affected by this vulnerability, anyone would be able to log in without any credentials. If you have remote access disabled, you’d be safe from people remotely accessing your router and tampering with it. To do this, open your router’s web interface and look for the “Remote Access,” “Remote Administration,” or “Remote Management” feature. Ensure it’s disabled — it should be disabled by default on most routers, but it’s good to check. Update the Firmware Like our operating systems, web browsers, and every other piece of software we use, router software isn’t perfect. The router’s firmware — essentially the software running on the router — may have security flaws. Router manufacturers may release firmware updates that fix such security holes, although they quickly discontinue support for most routers and move on to the next models. Unfortunately, most routers don’t have an auto-update feature like Windows and our web browsers do — you have to check your router manufacturer’s website for a firmware update and install it manually via the router’s web interface. Check to be sure your router has the latest available firmware installed. Change Default Login Credentials Many routers have default login credentials that are fairly obvious, such as the password “admin”. If someone gained access to your router’s web interface through some sort of vulnerability or just by logging onto your Wi-Fi network, it would be easy to log in and tamper with the router’s settings. To avoid this, change the router’s password to a non-default password that an attacker couldn’t easily guess. Some routers even allow you to change the username you use to log into your router. Lock Down Wi-Fi Access If someone gains access to your Wi-Fi network, they could attempt to tamper with your router — or just do other bad things like snoop on your local file shares or use your connection to downloaded copyrighted content and get you in trouble. Running an open Wi-Fi network can be dangerous. To prevent this, ensure your router’s Wi-Fi is secure. This is pretty simple: Set it to use WPA2 encryption and use a reasonably secure passphrase. Don’t use the weaker WEP encryption or set an obvious passphrase like “password”. Disable UPnP A variety of UPnP flaws have been found in consumer routers. Tens of millions of consumer routers respond to UPnP requests from the Internet, allowing attackers on the Internet to remotely configure your router. Flash applets in your browser could use UPnP to open ports, making your computer more vulnerable. UPnP is fairly insecure for a variety of reasons. To avoid UPnP-based problems, disable UPnP on your router via its web interface. If you use software that needs ports forwarded — such as a BitTorrent client, game server, or communications program — you’ll have to forward ports on your router without relying on UPnP. Log Out of the Router’s Web Interface When You’re Done Configuring It Cross site scripting (XSS) flaws have been found in some routers. A router with such an XSS flaw could be controlled by a malicious web page, allowing the web page to configure settings while you’re logged in. If your router is using its default username and password, it would be easy for the malicious web page to gain access. Even if you changed your router’s password, it would be theoretically possible for a website to use your logged-in session to access your router and modify its settings. To prevent this, just log out of your router when you’re done configuring it — if you can’t do that, you may want to clear your browser cookies. This isn’t something to be too paranoid about, but logging out of your router when you’re done using it is a quick and easy thing to do. Change the Router’s Local IP Address If you’re really paranoid, you may be able to change your router’s local IP address. For example, if its default address is 192.168.0.1, you could change it to 192.168.0.150. If the router itself were vulnerable and some sort of malicious script in your web browser attempted to exploit a cross site scripting vulnerability, accessing known-vulnerable routers at their local IP address and tampering with them, the attack would fail. This step isn’t completely necessary, especially since it wouldn’t protect against local attackers — if someone were on your network or software was running on your PC, they’d be able to determine your router’s IP address and connect to it. Install Third-Party Firmwares If you’re really worried about security, you could also install a third-party firmware such as DD-WRT or OpenWRT. You won’t find obscure back doors added by the router’s manufacturer in these alternative firmwares. Consumer routers are shaping up to be a perfect storm of security problems — they’re not automatically updated with new security patches, they’re connected directly to the Internet, manufacturers quickly stop supporting them, and many consumer routers seem to be full of bad code that leads to UPnP exploits and easy-to-exploit backdoors. It’s smart to take some basic precautions. Image Credit: Nuscreen on Flickr     

    Read the article

  • Should I install ubuntu on USB instead of HDD dual-boot?

    - by user2147243
    I had Ubuntu 12.04 installed as dual-boot OS on top of Vista on my laptop. Hacked the grub settings to default to Vista (instead of the default Ubuntu -- pain) on startup, and all was OK for occasional Ubuntu use for past 6 months. Then last week I got a strange message about 'lack of disk space' (~50MB free) when installing pxyplot, even though there was still about 6GB free disk space when I checked later. Then today the Ubuntu wouldn't load at all, and checking the HDD partitions in Vista it looked like the 15GB Ubuntu partition was now three smaller partitions! So, I got rid of those partitions and expanded the Vista partition to use the reclaimed space. Now can't restart ('grub rescue' appears and doesn't 'rescue' anything), so I'll have to do a boot recovery using a Vista installation CD. (Not a particularly user-friendly failure mode of the dual-boot installation!) I now have to decide to either a) try installing ubuntu on the HDD again, but don't want to stuff up my Vista ever again, as that is my most used OS, or b) install Ubuntu on a 16GB USB 3.0 stick. Apparently performance from USB won't be as good as from HDD, and running OS from USB stick does lots of r/w so the stick may fail after a few years! Perhaps installing Ubuntu on live USB and setup to then run in RAM would alleviate the performance/USB lifespan problems? If I create a live-USB for Ubuntu OS, will it boot off that when I restart the laptop with it plugged in? Or will I have to change the laptop setting for boot-order whenever I want to boot Ubuntu instead of Vista (that would be even more painful than the grub default boot order putting Ubuntu ahead of the existing Vista OS!) -- update: I recovered my Vista setup using Iolo SystemMechanic Disaster Recovery Tool, and created a bootable USB of Ubuntu 13.10 on an 8GB USB3.0 pendrive, with 4GB of 'persistence' to allow saving of settings, install some packages etc. It worked OK for a couple of test boots, but once I changed the time and desktop wallpaper, the next Ubuntu reboot crashed and I then couldn't get it to boot successfully. So I decided to install Ubuntu 12.04 LTS as a dual-boot again, but this time instead of partitioning the HDD and installing from an ISO DVD I used the wubi.exe tool to install Ubuntu as a dual-boot. Worked very well, although one oddity was that, despite asking how big the make the partition (20GB), the installed Ubuntu appears to be happily installed somewhere within the Vista NTFS file system (no partition shows up in Windows disk manager, and in Ubuntu disk management tool the entire 133 GB of HDD is showing, with ~40GB free space). A nice feature of installing the dual-boot using wubi is that the laptop now uses Windows boot manager on startup, with Vista as the default OS and Ubuntu happily listed as second on the list. So far so good.

    Read the article

  • Speakers doesn't work properly on Ubuntu 12.10 but works fine on windows7

    - by giri
    I have recently upgraded my Ubuntu 12.04 to 12.10 version and find issues with my speakers as well as microphone.When I boot the system they doesn't work, but(don't know why) when I restart once or twice they work fine.There is no problem with my laptop(dell xps) as they work well on windows7. I have my sound settings as follows Hardware --- Built-in Audio 1 Outpu/1 Input Analog Stereo Duplex Input(Internal Microphone) & Output(Speakers) -----Built-in audio Analog Stereo Any suggestions to fix the problem??

    Read the article

  • Wired and Wireless Network Issues with PPPoE

    - by user9054
    down vote favorite Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd. So happily i installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started. It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up . Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP , needless to say it failed. For the love of god i cannot understand why wifi-radar is using DHCP when i have specified manual settings . Next i decided to use the wired network to surf the net looking for a solution . So i plugged in the network cable from my modem , it detected the plugged in connection , i configured eth0 , used pppoeconf and connected to the net. Then i foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon to start the dsl-provider connection and it said something about network error or something . Now my ifconfig shows only lo , both eth0 and eth1 have disappeared. Can anybody help me on this ? Is it a problem with ipv6 , if so how do you disable ipv6 on ubuntu 10.10 ? OR is this is a known issue with ubuntu 10.10 ? PS : 1) i tried linux mint 10 and had the same issue. On rebooting wireless network was not getting detected . 2) i have made myself the administrator so that there is no issue of rights or anything. Any help is appreciated.

    Read the article

  • How do I get the same dual-screen experience on my install as I had on the 12.04 Live CD?

    - by Alexander G
    I downloaded, burned to disc, and booted Ubuntu 12.04 Precise (I defected to Arch for a year when I got fed up of Natty). I was pleasantly surprised by both of my monitors working perfectly on there (needed to rearrange as my secondary monitor is to the left, however). So I installed. There's no recognition of the second monitor now, and it doesn't appear in the settings. I've also enabled the Nvidia driver. What do I do?

    Read the article

  • Lost network interface after mac change

    - by Arturo Grc
    I'm using Ubuntu server 12.04 inside Virtualbox and everything was working as expected, but since I changed the mac address in Virtualbox network settings the network interface is not being recognized on Ubuntu. I don't remember the old mac address and everytime Ubuntu starts shows waiting for network configuration when I use ifconfig only appears lo (loopback device) and eth0 is lost, how can I fix this problem?

    Read the article

  • Freeze after 'init-bottom' script before installation starts on a Lenovo G475

    - by NikitaBaksalyar
    I'm trying to install Ubuntu 11.04 x86 on a Lenovo G475 laptop (based on AMD Fusion), but installation freezes after loading ends on a splash screen. I've tried to run installation without quiet and splash parameters - but result is the same: installation freeze after running "init-bottom" script. I thought that it can be because of BIOS settings, but I've also tried to change them several times without any result.

    Read the article

  • Keep getting messages about internal system errors

    - by Tomas Lycken
    I keep getting popups about internal system errors (see screenshot below) on irregular intervals (several times a day), that I don't know what to do about. If I continue through the dialog and try to report the error back to the Ubuntu project, I get a message stating that development on this version of Ubuntu has been completed, and that I should ask for help here if I don't know what to do about it. I don't. If I show the details of the error message, the "executable path" parameter shows /usr/share/apport/apport-gpu-error-intel.py. Is this a bug I should report to Launchpad, or just a configuration error somewhere? If it's a bug, how do I collect the data I (and the devs) need? Update in response to comment: I am running an ASUS N53SN, sporting an Intel Core i7 2630QM CPU and an NVidia GeForce 550M GPU.

    Read the article

  • tring to edit brightness

    - by Martin Mobbs
    i'm tring to edit the /sys/class/backlight/max_brightness file to stop ubuntu 12 returning to maximum brightness on each reboot. gedit won't save the file after i have modified it i have used chown to change ownership to me which was successful. I then changed gedits settings so it won't save a backup but it still won't save. It returns with this error, Could not save the file /sys/class/backlight/acpi_video0/max_brightness. Unexpected error: Error writing to file: Input/output error is this yet another bug?

    Read the article

  • Gnome-shell worskpace preview on dual screen

    - by martin
    I'have isntalled gnome3 and I have dual screens(laptop, monitor). Is it possible to see the other monitor in workspace preview in the gnome panel??? I only can see primary monitor, that's why i'm not able to move windows inside the second screen? I've tried to change some settings in dconf , but with no luck. I want to have it like this http://stephen.rees-carter.net/wp-content/uploads/2011/04/Unity-workspace-switcher.png Does anyone have a solution?

    Read the article

  • INI files or Registry or personal files

    - by Shirish11
    I want to save the configuration of my project. Which includes Screen size Screen Position Folder paths Users settings and so on. The standard places where you can save these are configuration values are: Registry INI files Personal files (like *.cfg) I would like to know how do you choose between these places? Also are there any pros & cons of using any of them?

    Read the article

  • ubuntu server 12.10 get input signal out of range on HP DL380 G4

    - by lix
    After installed ubuntu 12.10 server on HP DL380 G4, I can't boot into it. And the LCD got message "Input signal out of range, recommened settings is 1280x1024". I can't see the terminal and tried several LCDs and still can not work either. How can I should do now? I tried 12.04 but got fail message when installing (select and install software). Is that signal push me to change another os instead of my favorite ubuntu?

    Read the article

  • Can I use Wubi install on Windows 7 FDE?

    - by Michael Chapman
    I have a windows machine using Truecrypt 7.1a FDE. I would like to use wubi to install Ubuntu within windows. Will doing this cause any issues with my system booting up? From what I understand Wubi does not modify any bootloaders. All it does is modify some boot settings within windows. So in theory the Truecrypt custom bootloader will remain the same, and after I get through the truecrypt prompt, have the option of windows or Ubuntu right?

    Read the article

  • Midori displays mobile sites.

    - by Tigull
    I've installed Midori to work in an Elementary mockup. Midori works just fine, but, on a few domains, it opens mobile websites instead of the regular pages. A of now, this happens with gmail.com, facebook.com, paginegialle.it, and others; yet other websites which do have a mobile version, as gazzetta.it, show the regular version. I couldn't find a solution through settings and I didn't find any mention of this problem on forums or else, so any help would be greatly appreciated.

    Read the article

  • How to associate hardware volume control to USB speakers?

    - by Wolfger
    My Xubuntu system recognizes my speakers, and I can change the mixer settings to make them the active sound device, but no matter what I do, the hardware dial will only affect the onboard sound device. generic-usb 0003:046D:0A19.0003: input,hidraw1: USB HID v1.00 Device [ Logitech Logitech Z205 ] on usb-0000:00:1d.1-1/input2 updated to reflect the fact that this was Xubuntu desktop (from Kubuntu install originally) where I had this problem. I was able to easily do this from Ubuntu Natty installation.

    Read the article

  • Ubuntu software center crashes when i try to download anything

    - by vaggelas
    I was trying to set up an old printer by installing several drivers, and I got a problem in software center. I am unable to download anything from it. It opens, but when I try to download something it drops an error message and the installation stops. I can do all the installations from command line, so it is not a major problem, but still will be nice having it again. I reinstall it several times from terminal trying all the solutions I found in the forum, but still the problem is here. Any help is appreciated. This is the error I get. traceback usr/share/softwarecenter/backend/installbackend_impl/aptd.py line 383 in install defer = true DbusException : org.freedesktop.Dbus.Error.Spawn.Execfailed: failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper = Success

    Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >