Search Results

Search found 7955 results on 319 pages for 'signal processing'.

Page 198/319 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

  • What Wireless Router/ADSL Modem to get? N-band a must!!

    - by JJarava
    I'm looking for a Dual-N band Router OR ADSL Gateway and I'd like some recommendations. Situation: I have a 802.11b/g ADSL gateway provided by my telco, but the WIFI signal won't cover all the house (especially the living-room, so my tv-connected Mac Mini has poor to no internet access). So I'm looking to either replace the DSL modem with a N-enabled one, or to add a Router to the mix. I've had a modem+router setup for many years, and I know the advantatges (double NAT, double FW = more security) and issues (more complex to troubleshoot, two possible points of failure), so I'd rather live with a single (ADSL Gateway) device, if possible. Requirements: Dual-N Band (300 Mbs WIFI) 1 GB Ethernet ports ADSL2+ support (if it's a ADSL gateway, which would be desirable) "Best" range and speed possible Nice to have: USB port to share disks/printers on the network Media streaming I've been a long time user of Linksys, so googling around I found the WRT610N (http://www.linksysbycisco.com/US/en/products/WRT610N) for a "Pure Router" perspective, and it's one of those that Linksys styles "N++" (http://www.linksysbycisco.com/US/en/promo/Promotion-Go-Wireless?stepname=Promotion-Step-Go-Wireless-High-Performance) But I haven't been able to find similar "ADSL" gateways. I've found the WAG320N, but there is little to no info in the Linksys site (i.e., i don't know if it's Dual Band, or if it has GB ethernet) Any opinions/recommendations of other products/suggestions are more than welcome.

    Read the article

  • Interrupted system call during "hg convert"

    - by Aaron Digulla
    When I run "hg convert" to convert a Subversion repository to Mercurial, I get this error: fetching revision log for "/trunk" from 1538 to 0 run hg sink post-conversion action Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 46, in _runcatch return _dispatch(ui, args) File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 454, in _dispatch return runcommand(lui, repo, cmd, fullargs, ui, options, d) File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 324, in runcommand ret = _runcommand(ui, options, cmd, d) File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 505, in _runcommand return checkargs() File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 459, in checkargs return cmdfunc() File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 453, in <lambda> d = lambda: util.checksignature(func)(ui, *args, **cmdoptions) File "/usr/lib/pymodules/python2.6/mercurial/util.py", line 386, in check return func(*args, **kwargs) File "/usr/lib/pymodules/python2.6/hgext/convert/__init__.py", line 229, in convert return convcmd.convert(ui, src, dest, revmapfile, **opts) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 398, in convert c.convert(sortmode) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 312, in convert parents = self.walktree(heads) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 109, in walktree commit = self.cachecommit(n) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 267, in cachecommit commit = self.source.getcommit(rev) File "/usr/lib/pymodules/python2.6/hgext/convert/subversion.py", line 433, in getcommit self._fetch_revisions(revnum, stop) File "/usr/lib/pymodules/python2.6/hgext/convert/subversion.py", line 814, in _fetch_revisions for entry in stream: File "/usr/lib/pymodules/python2.6/hgext/convert/subversion.py", line 122, in __iter__ entry = pickle.load(self._stdout) IOError: [Errno 4] Interrupted system call abort: Interrupted system call Apparently, it is possible to restart a read on EINTR but how would I do that with pickle.load()? Also I wonder where that signal comes from? I suspect it's SIGCHILD but shouldn't popen() handle that?

    Read the article

  • CodePlex Daily Summary for Thursday, December 02, 2010

    CodePlex Daily Summary for Thursday, December 02, 2010Popular ReleasesChronos WPF: Chronos v2.0 Beta 3: Release notes: Updated introduction document. Updated Visual Studio 2010 Extension (vsix) package. Added horizontal scrolling to the main window TaskBar. Added new styles for ListView, ListViewItem, GridViewColumnHeader, ... Added a new WindowViewModel class (allowing to fetch data). Added a new Navigate method (with several overloads) to the NavigationViewModel class (protected). Reimplemented Task usage for the WorkspaceViewModel.OnDelete method. Removed the reflection effect...MDownloader: MDownloader-0.15.26.7024: Fixed updater; Fixed MegauploadDJ - jQuery WebControls for ASP.NET: DJ 1.2: What is new? Update to support jQuery 1.4.2 Update to support jQuery ui 1.8.6 Update to Visual Studio 2010 New WebControls with samples added Autocomplete WebControl Button WebControl ToggleButt WebControl The example web site is including in source code project.LateBindingApi.Excel: LateBindingApi.Excel Release 0.7g: Unterschiede zur Vorgängerversion: - Zusätzliche Interior Properties - Group / Ungroup Methoden für Range - Bugfix COM Reference Handling für Application Objekt in einigen Klassen Release+Samples V0.7g: - Enthält Laufzeit DLL und Beispielprojekte Beispielprojekte: COMAddinExample - Demonstriert ein versionslos angebundenes COMAddin Example01 - Background Colors und Borders für Cells Example02 - Font Attributes undAlignment für Cells Example03 - Numberformats Example04 - Shapes, WordArts, P...ESRI ArcGIS Silverlight Toolkit: November 2010 - v2.1: ESRI ArcGIS Silverlight Toolkit v2.1 Added Windows Phone 7 build. New controls added: InfoWindow ChildPage (Windows Phone 7 only) See what's new here full details for : http://help.arcgis.com/en/webapi/silverlight/help/#/What_s_new_in_2_1/016600000025000000/ Note: Requires Visual Studio 2010, .NET 4.0 and Silverlight 4.0.ASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.1: Atomic CMS 2.1.1 release notes Atomic CMS installation guide Winware: Winware 3.0 (.Net 4.0): Winware 3.0 is base on .Net 4.0 with C#. Please open it with Visual Studio 2010. This release contains a lab web application.EnhSim: EnhSim 2.1.1: 2.1.1This release adds in the changes for 4.03a. To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Switched Searing Flames bac...AI: Initial 0.0.1: It’s simply just one code file; it simulates AI and machine in a simulated world. The AI has a little understanding of its body machine and parts, and able to use its feet to do actions just start and stop walking. The world is all of white with nothing but just the machine on a white planet. Colors, odors and position information make no sense. I’m previous C# programmer and I’m learning F# during this project, although I’m still not a good F# programmer, in this project I learning to prog...NKinect: NKinect Preview: Build features: Accelerometer reading Motor serial number property Realtime image update Realtime depth calculation Export to PLY (On demand) Control motor LED Control Kinect tiltMicrosoft - Domain Oriented N-Layered .NET 4.0 App Sample (Microsoft Spain): V1.0 - N-Layer DDD Sample App .NET 4.0: Required Software (Microsoft Base Software needed for Development environment) Visual Studio 2010 RTM & .NET 4.0 RTM (Final Versions) Expression Blend 4 SQL Server 2008 R2 Express/Standard/Enterprise Unity Application Block 2.0 - Published May 5th 2010 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2D24F179-E0A6-49D7-89C4-5B67D939F91B&displaylang=en http://unity.codeplex.com/releases/view/31277 PEX & MOLES 0.94.51023.0, 29/Oct/2010 - Visual Studio 2010 Power Tools http://re...Sense/Net Enterprise Portal & ECMS: SenseNet 6.0.1 Community Edition: Sense/Net 6.0.1 Community Edition This half year we have been working quite fiercely to bring you the long-awaited release of Sense/Net 6.0. Download this Community Edition to see what we have been up to. These months we have worked on getting the WebCMS capabilities of Sense/Net 6.0 up to par. New features include: New, powerful page and portlet editing experience. HTML and CSS cleanup, new, powerful site skinning system. Upgraded, lightning-fast indexing and query via Lucene. Limita...Minecraft GPS: Minecraft GPS 1.1.1: New Features Compass! New style. Set opacity on main window to allow overlay of Minecraft. Open World in any folder. Fixes Fixed style so listbox won't grow the window size. Fixed open file dialog issue on non-vista kernel machines.DotSpatial: DotSpatial 11-28-2001: This release introduces some exciting improvements. Support for big raster, both in display and changing the scheme. Faster raster scheme creation for all rasters. Caching of the "sample" values so once obtained the raster symbolizer dialog loads faster. Reprojection supported for raster and image classes. Affine transform fully supported for images and rasters, so skewed images are now possible. Projection uses better checks when loading unprojected layers. GDAL raster support f...Virtu: Virtu 0.9.0: Source Requirements.NET Framework 4 Visual Studio 2010 or Visual Studio 2010 Express Silverlight 4 Tools for Visual Studio 2010 Windows Phone 7 Developer Tools (which includes XNA Game Studio 4) Binaries RequirementsSilverlight 4 .NET Framework 4 XNA Framework 4Cropper: 1.9.4: Mostly fixes for issues with a few feature requests. Fixed Issues 2730 & 3638 & 14467 11044 11447 11448 11449 14665 Implemented Features 6123 11581PFC: PFC for PB 11.5: This is just a migration from the 11.0 code. No changes have been made yet (and they are needed) for it to work properly with 11.5.PDF Rider: PDF Rider 0.5: This release does not add any new feature for pdf manipulation, but enables automatic updates checking, so it is reccomended to install it in order to stay updated with next releases. Prerequisites * Microsoft Windows Operating Systems (XP - Vista - 7) * Microsoft .NET Framework 3.5 runtime * A PDF rendering software (i.e. Adobe Reader) that can be opened inside Internet Explorer. Installation instructionsChoose one of the following methods: 1. Download and run the "pdfRider0...BCLExtensions: BCL Extensions v1.0: The files associated with v1.0 of the BCL Extensions library.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-11-25: Code samples for Visual Studio 2010New Projects<geomap/> - Mapping UI Extensions to HTML / XHTML: A extension to HTML that adds support for declaratively adding maps to web applications. Initially there will only be support for Bing Maps, but a plugin API will be available to add other providers.ActiveRecord Provider: AR Provider is a .NET Membership provider implemented in C#, using Castle ActiveRecord for data persistence.AS PhoneBook: PhoneBook is very simple program which helps you to easily save your contacts names, numbers and e-mails. Designed look, easy dashboard, simple codes developed in c#, perfect perfomance...BAFactory Framework: A multipurpose frameworkBaqUP: Log syncronization system.C++ Bitmap Library: The C++ Bitmap Library consists of simple, robust, optimized and portable 24-bit bitmap image processing algorithms for the C++ language. Drag & Drop for SharePoint: Organize your SharePoint document libraries by moving documents using jQuery Multi-Select Drag&Drop (MSDD) functionality. Estoque: Estoque is a Todo-App that comes with TFS integration an sync.FBA Configuration Manager for SharePoint 2010: Setting up Forms Based Authentication in SharePoint 2010 requires updating the web.config file of three web applications. This utility allows you to update all 3 configs in a single click. The updater can also be invoked from PowerShell.Hackathon - DotNetNuke Razor Contact List: This is a simple set of Razor scripts for displaying a contact list in DotNetNuke using profile data.Joselyn Web Toolkit: A JS LibraryKind Of Magic MSBuild Task: MSBuild task to simplify implementation of INotifyPropertyChanged interface. Injects supporting code in property setters: raising PropertyChanged event when value changed. LocalizationLibrary: The Localization Library is a collection of reusable software component that provide support for localization. This library enables you to localize WPF (Windows Presentation Foundation), Silverlight and WP7 (Windows Phone 7) applications.M1Library: Simple home library managernerdcms: nerdcms.PkrClck: I don't have a summary yet.Poplar: Poplar populates trees.Pyxis 2: NETMF based Operating EnvironmentSchifra Reed Solomon Error Correcting Code Library: Schifra is a very robust, highly optimized and extremely configurable Reed-Solomon error correcting code library for both software and IP core based applications with implementations in C++ and VHDL. Sharepoint (WSS 3.0, MOSS 2007) Reference Samples: A project that contains Sharepoint (WSS 3.0, MOSS 2007) Reference Samples including Custom Site Definition Feature, Custom List View Web Part Feature, List Event Receiver Feature with Feature Receiver, and Custom Theme Feature.Sharepoint 2010 Reset Version Number: Two workflows for SharePoint 2010 which will renumber the versions of an item depending on your needs.Silverlight Control Templates: Replace the default look of Silverlight controls with animated templates.TeamBuy???: ASP.NET????The C++ String Toolkit Library: The C++ String Toolkit Library (StrTk) consists of robust, optimized and portable string processing algorithms for the C++ language. StrTk is designed to be easy to use and integrate within existing code bases. The E2 Compiler and Simulator: The E2 compiler and simulator.tinymceaspdotnet: TinyMceEditor with image uploaderTwinkle Tasks: Twinkle Tasks (TT) is a file based work item tracking (WIT) system designed to work on the command prompt in conjunction with Distributed Version Control Systems (DVCS), such as Mercurial and GIT. UserVoice Helper for WebMatrix: The UserVoice Helper for WebMatrix and ASP.NET Web Pages allows you to easily add UserVoice feedback functionality to your site. Helper also wraps several public API calls. web pejsci: Jedna se o jednoduchy web o psech, s jednoduchym administracnim rozhranim v ASP.NETWykobi Computational Geometry Library: Wykobi is an efficient, robust and simple to use multi-platform 2D/3D computational geometry library. Wykobi provides a concise, predictable, and deterministic interface for geometric primitives and complex geometric routines using and conforming to the ISO/IEC 14882:2003 C++ lanXL5 Module Sheet Converter: This is for workbooks that contain Excel5/95 Module sheets that require the VBA Converter Pack HotFix download to open (see Microsoft KB 926430). It exports the XL5 Module Sheets, removes them and then imports them back in as a Visual Basic Editor modules.????: ?????????????????,??????????????????,?????????????????,?????,?????????????????????????,??????????????????????????????。 ?????OAuth, ?????.Net Framework4.0, ?????C# ???????????,????????????,???????????。

    Read the article

  • CodePlex Daily Summary for Saturday, October 06, 2012

    CodePlex Daily Summary for Saturday, October 06, 2012Popular ReleasesVidCoder: 1.4.2 Beta: Added Modulus dropdown to Loose anamorphic choice. Fixed a problem where the incorrect scaling would be chosen and pick the wrong aspect ratio. Fixed issue where old window objects would stick around and continue to respond to property change events We now clear locked width/height values when switching to loose or strict anamorphic. Fixed problems with Custom Anamorphic and display width specification. Fixed text in number box incorrectly being shown in gray in some circumstances.RiP-Ripper & PG-Ripper: PG-Ripper 1.4.02: changes NEW: Added Support Big Naturals Only forum NEW: Added Setting to enable/disable "Show last download image"patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).Configuration Manager 2012 Automation: Beta Code (v0.1): Beta codeWinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.2: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y....NET Micro Framework: .NET MF 4.3 (Beta) -- warning for SDK below: WARNING!!! There is a known issue with the SDK installer that may prevent you from installing. We are working on the issue and will update the SDK as soon as we have a fix. Thank you. This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC suppo...MCEBuddy 2.x: MCEBuddy 2.3.1: 2.3.1All new Remote Client Server architecture. Reccomended Download. The Remote Client Installation is OPTIONAL, you can extract the files from the zip archive into a local folder and run MCEBuddy.GUI directly. 2.2.15 was the last standalone release. Changelog for 2.3.1 (32bit and 64bit) 1. All remote MCEBuddy Client Server architecture (GUI runs remotely/independently from engine now) 2. Fixed bug in Audio Offset 3. Added support for remote MediaInfo (right click on file in queue to get ...D3 Loot Tracker: 1.5: Support for session upload to website. Support for theme change through general settings. Time played counter will now also display a count for days. Tome of secrets are no longer logged as items.NTCPMSG: V1.2.0.0: Allocate an identify cableid for each single connection cable. * Server can asend to specified cableid directly.Team Foundation Server Word Add-in: Version 1.0.12.0622: Welcome to the Visual Studio Team Foundation Server Word Add-in Supported Environments Microsoft Office Word 2007 and 2010 X86 (32-bit) Team Foundation Server 2010 Object Model TFS 2010, 2012 and TFS Service supported, using TFS OM / Explorer 2010. Quality-Bar Details Tool has been reviewed by Visual Studio ALM Rangers Tool has been through an independent technical and quality review All critical bugs have been resolved Known Issues / Bugs WI#43553 - The Acceptance criteria is not pu...Viva Music Player: Viva Music Player v0.6.7: Initial release.Korean String Extension for .NET: ?? ??? ??? ????(v0.2.3.0): ? ?? ?? ?? ???? - string.KExtract() ?? ???? - string.AppendJosa(...) AppendJosa(...)? ?? ???? KAppendJosa(...)? ??? ?????UMD????? - PC?: UMDEditor?????V2.7: ??:http://jianyun.org/archives/948.html =============================================================================== UMD??? ???? =============================================================================== 2.7.0 (2012-10-3) ???????“UMD???.exe”??“UMDEditor.exe” ?????????;????????,??????。??????,????! ??64????,??????????????bug ?????????????,???? ???????????????? ???????????????,??????????bug ------------------------------------------------------- ?? reg.bat ????????????。 ????,??????txt/u...Untangler: Untangler 1.0.0: Add a missing file from first releaseDirectX Tool Kit: October 2012: October 2, 2012 Added ScreenGrab module Added CreateGeoSphere for drawing a geodesic sphere Put DDSTextureLoader and WICTextureLoader into the DirectX C++ namespace Renamed project files for better naming consistency Updated WICTextureLoader for Windows 8 96bpp floating-point formats Win32 desktop projects updated to use Windows Vista (0x0600) rather than Windows 7 (0x0601) APIs Tweaked SpriteBatch.cpp to workaround ARM NEON compiler codegen bugCRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1002.3): Visual Ribbon Editor 1.3.1002.3 What's New: Multi-language support for Labels/Tooltips for custom buttons and groups Support for base language other than English (1033) Connect dialog will not require organization name for ADFS / IFD connections Automatic creation of missing labels for all provisioned languages Minor connection issues fixed Notes: Before saving the ribbon to CRM server, editor will check Ribbon XML for any missing <Title> elements inside existing <LocLabel> elements...SubExtractor: Release 1029: Feature: Added option to make i and ¡ characters movie-specific for improved OCR on Spanish subs (Special Characters tab in Options) Feature: Allow switch to Word Spacing dialog directly from Spell Check dialog Fix: Added more default word spacings for accented characters Fix: Changed Word Spacing dialog to show all OCR'd characters in current sub Fix: Removed application focus grab during OCR Fix: Tightened HD subs fuzzy logic to reduce false matches in small characters Fix: Improved Arrow k...WallSwitch: WallSwitch 1.0.6: Version 1.0.6 Changes: Added hotkeys to perform a variety of operations (next/previous image, pause, clear history, etc.) Added color effects for grayscale, sepia and intense color. Various fixes.Readable Passphrase Generator: KeePass Plugin 0.7.1: See the KeePass Plugin Step By Step Guide for instructions on how to install the plugin. Changes Built against KeePass 2.20New ProjectsBackup Mirth To TFS: You're a developer managing a handful of Mirth Connect HL7 integration servers. You want to ensure that your servers are under change control.Capability Mapping Tool: Capability Mapping Tool provides an intuitive interface to input and prepare reports about the capabilities in university programs and their development also prCRM 2011 Global Quick Search: This CRM 2011 Silverlight WebResource will facilitate User to do Quick Search on multiple CRM Entities and results will be shown on single pageDatabaseUtil: Useful database utilities. Currently only for Entity Framework 4.DevTxt Blog Engine: The blog engine I use.Distrib(uted) Processing Grid: Distrib is a simple yet powerful distributed processing system.Download Organizer: Download Organizer is a Windows service developed in C# on .NET 4 to monitor your downloads folder and move inbound files to various locations on your PC.Example for Tutorial: Lorem IpsumExternal scripts plugin for nopCommerce: This plugin allows you to add any script to any page of your nopCommerce websiteGLMET Next Generation: A user of GLMET/MLT and want to use again? This is right for YOU! A great Folder Locker just for only you!Håvard Fjær: Code I make that might be useful to others. Mostly C#, .NET, NETMF and Gadgeteer stuff. IdentifyUI - An automation tool to identify objects: IdentifyUI - An automation tool to identify objects It works only on windows operating system. It has been tested on Windows XP. iFinity Google Analytics for DotNetNuke: The iFinity Google Analytics module is a simple way to implement Google Analytics tracking for your DotNetNuke website, but also contains advanced features.Labmodel: Modelling of flow around islandMachineSLATStatusCheck: This helps to check the SLAT capability of a machine, so that it can run hyper-v client or not.OneNote HTML Export: The OneNote HTML Export tool allows HTML export of an entire OneNote notebookPreactor Power Tools: The Preactor Power Tools are a collection of tools to enhance the functionality of Preactor.qlevel: sadasdasdroucheng: C# Hello worldSBB - Serial Browser Bridge: Stelle eingehende Daten von einer seriellen Schnittstellen in einem Browser zur Verfügung.Sendine Net: - Sendine.NET ??????????? Socket ???? - ???????????????? - ????(Router)???? - ??????????(IProtocolParser) - ????(Multi-Core)?? - ????????? - ???????Service Sheet for SharePoint: Creates ServiceSheet for each employee and customer that contains the data from Microsoft Dynamics CRM 2011 in relation to the done Services by each Consultant.SharePoint Bulk Uploader: This is client SharePoint tool that can upload a bulk of files to SharePoint document library using SharePoint Client Object Model. sharepoint foundation 2013 persian language pack: SharePoint 2013 Persian Language Pack . this project started for create a language pack for SharePoint 2013 for supporting Persian Language Pack , this project SharePoint Managed Metadata Navigator: Use SharePoint Managed Metadata Navigator to browse, explore, create, update, delete, export and import MMD Groups, Termsets, and Terms for SharePoint 2010.SharePoint Site template for PRINCE2: PRINCE2 is a Project Management Guidance from UK OGC. This project aims to provide a SharePoint site template for SharePoint 2010 and SharePoint 2013Simple Code Gen: This project will generate c# generated files from SQL server databaseTiwanaku Book Builder: Web application for the development and construction of publication formats, including ePub, docBook, etc.Tris: The all new Tris 2.0 appWalkingGraph: Test

    Read the article

  • Extending home network using multiple access point originating from another access point

    - by cyberjar09
    I have a home network with the current setup (RJ45 running from main router to access point) : +-------------+ +--------------+ | 192.168.2.1 | |192.168.2.2 | | router +--------------->access point 1| +-----^-------+ +--------------+ | | +-----+--------+ | 192.168.1.1 | | modem | +-----^--------+ | | | | +--+--+ | ISP | +-----+ However I would like to extend the network to two more floors in the house via the existing Access Point (router is too far and not reachable using a network cable, hence I need to extend using current access point). Please see diagram below : +-------------+ +--------------+ +----------------+ | 192.168.2.1 | |192.168.2.2 | | 192.168.2.3 | | router +--------------->access point 1+----------> access point 2 | +-----^-------+ +--------+-----+ +----------------+ | | | | +-----+--------+ | | 192.168.1.1 | | | modem | | +-----^--------+ | +----------------+ | +----------------> 192.168.2.4 | | | access point 3 | | +----------------+ | +--+--+ | ISP | +-----+ Q1 : is this setup possible? Q2 : if possible, will I have to do anything different from what I did to setup access point 1? edit 1 : I am trying to study the dd-wrt documentation to see which would be the correct mode of operation for me Linking Routers but Im confused because I dont see any info on how to use an existing Access point to extend the signal of the SSID. If anyone could point me to the correct wiki for how I should setup AP2 and AP3 based on AP1, it would be very helpful. For AP1, I did the following Use static IP and setup same SSID as primary wireless router use same security as primary wireless router make AP1 point to 192.168.2.1 (primary router) for DHCP Thanks in advance.

    Read the article

  • Media Center setup won't complete for watching TV

    - by Robert
    I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing it okay before I tried to run setup. (I ran setup to try to do recording with Media Center.) Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

    Read the article

  • CodePlex Daily Summary for Wednesday, March 09, 2011

    CodePlex Daily Summary for Wednesday, March 09, 2011Popular ReleasesDirectQ: Release 1.8.7 (RC2): More fixes and improvements. Note for multiplayer - you may need to set r_waterwarp to 0 or 2 before connecting to a server, otherwise you will get a "Mod_PointInLeaf: bad model" error and not be able to connect. You can set it back to 1 after you connect, of course. This only came to light after releasing, and will be fixed in the next one.Microsoft All-In-One Code Framework: Visual Studio 2008 Code Samples 2011-03-09: Code samples for Visual Studio 2008myCollections: Version 1.3: New in version 1.3 : Added Editor management for Books Added Amazon API for Books Us, Fr, De Added Amazon Us, Fr, De for Movies Added The MovieDB for Fr and De Added Author for Books Added Editor and Platform for Games Added Amazon Us, De for Games Added Studio for XXX Added Background for XXX Bug fixing with Softonic API Bug fixing with IMDB UI improvement Removed GraceNote Added Amazon Us,Fr, De for Series Added TVDB Fr and De for Series Added Tracks for Musi...Facebook Graph Toolkit: Facebook Graph Toolkit 1.1: Version 1.1 (8 Mar 2011)new Dialog class for redirecting users to Facebook dialogs new Async publishing methods new Check for Extended Permissions option fixed bug: inappropiate condition of redirecting to login in Api class fixed bug: IframeRedirect method not workingpatterns & practices : Composite Services: Composite Services Guidance - CTP2: This is the second CTP of the p&p Composite Service Guidance.Python Tools for Visual Studio: 1.0 Beta 1: Beta 1You can't install IronPython Tools for Visual Studio side-by-side with Python Tools for Visual Studio. A race condition sometimes causes local MPI debugging to miss breakpoints. When MPI jobs on a cluster fail they don’t get cleaned up correctly, which can cause debugging to stall because the associated MPI job is stuck in the queue. The "Threads" view has a race condition which can cause it not to display properly at times. VS2010 shortcuts that are pinned to the taskbar are so...DotNetAge -a lightweight Mvc jQuery CMS: DotNetAge 2: What is new in DotNetAge 2.0 ? Completely update DJME to DJME2, enhance user experience ,more beautiful and more interactively visit DJME project home to lean more about DJME http://www.dotnetage.com/sites/home/djme.html A new widget engine has came! Faster and easiler. Runtime performance enhanced. SEO enhanced. UI Designer enhanced. A new web resources explorer. Page manager enhanced. BlogML supports added that allows you import/export your blog data to/from dotnetage publishi...Kooboo CMS: Kooboo CMS 3.0 Beta: Files in this downloadkooboo_CMS.zip: The kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL,SQLCE, RavenDB and MongoDB. Default is XML based database. To use them, copy the related dlls into web root bin folder and remove old content provider dlls. Content provider has the name like "Kooboo.CMS.Content.Persistence.SQLServer.dll" View_Engines.zip: Supports of Razor, webform and NVelocity view engine. Copy the dlls into web root bin folder t...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.2: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager added fullscreen for the popup and popupformIronPython: 2.7 Release Candidate 2: On behalf of the IronPython team, I am pleased to announce IronPython 2.7 Release Candidate 2. The releases contains a few minor bug fixes, including a working webbrowser module. Please see the release notes for 61395 for what was fixed in previous releases.LINQ to Twitter: LINQ to Twitter Beta v2.0.20: Mono 2.8, Silverlight, OAuth, 100% Twitter API coverage, streaming, extensibility via Raw Queries, and added documentation.IIS Tuner: IIS Tuner 1.0: IIS and ASP.NET performance optimization toolMinemapper: Minemapper v0.1.6: Once again supports biomes, thanks to an updated Minecraft Biome Extractor, which added support for the new Minecraft beta v1.3 map format. Updated mcmap to support new biome format.Sandcastle Help File Builder: SHFB v1.9.3.0 Release: This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, and adds support for projects targeting the Silverlight Framework. This release uses the Sandcastle Guided Installation package used by Sandcastle Styles. Download and extract to a folder and then run SandcastleI...AutoLoL: AutoLoL v1.6.4: It is now possible to run the clicker anyway when it can't detect the Masteries Window Fixed a critical bug in the open file dialog Removed the resize button Some UI changes 3D camera movement is now more intuitive (Trackball rotation) When an error occurs on the clicker it will attempt to focus AutoLoLYAF.NET (aka Yet Another Forum.NET): v1.9.5.5 RTW: YAF v1.9.5.5 RTM (Date: 3/4/2011 Rev: 4742) Official Discussion Thread here: http://forum.yetanotherforum.net/yaf_postsm47149_v1-9-5-5-RTW--Date-3-4-2011-Rev-4742.aspx Changes in v1.9.5.5 Rev. #4661 - Added "Copy" function to forum administration -- Now instead of having to manually re-enter all the access masks, etc, you can just duplicate an existing forum and modify after the fact. Rev. #4642 - New Setting to Enable/Disable Last Unread posts links Rev. #4641 - Added Arabic Language t...Snippet Designer: Snippet Designer 1.3.1: Snippet Designer 1.3.1 for Visual Studio 2010This is a bug fix release. Change logFixed bug where Snippet Designer would fail if you had the most recent Productivity Power Tools installed Fixed bug where "Export as Snippet" was failing in non-english locales Fixed bug where opening a new .snippet file would fail in non-english localesChiave File Encryption: Chiave 1.0: Final Relase for Chave 1.0 Stable: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Now with added support to Windows XP! Change Log from 0.9.2 to 1.0: ==================== Added: > Added Icon Overlay for Windows 7 Taskbar Icon. >Added Thumbnail Toolbar buttons to make the navigation easier...Chirpy - VS Add In For Handling Js, Css, DotLess, and T4 Files: Margogype Chirpy (ver 2.0): Chirpy loves Americans. Chirpy hates Americanos.ASP.NET: Sprite and Image Optimization Preview 3: The ASP.NET Sprite and Image Optimization framework is designed to decrease the amount of time required to request and display a page from a web server by performing a variety of optimizations on the page’s images. This is the third preview of the feature and works with ASP.NET Web Forms 4, ASP.NET MVC 3, and ASP.NET Web Pages (Razor) projects. The binaries are also available via NuGet: AspNetSprites-Core AspNetSprites-WebFormsControl AspNetSprites-MvcAndRazorHelper It includes the foll...New ProjectsA-Inventory: Inventory Management System * Purchase Orders * Sales Orders * Multiple warehouses * Stock Transfers * Financial Transaction Tracking * ReportsAsync Execution Lib: This library simplifies the process of executing code on a different thread and separating the caller from the actual command logic. To do this messages are put into an execution module and the library automatically calls the target message handlers.Bing Wallpaper Downloader: Downloads wallpapers from Bing and displays them as the desktop wallpaper. Based on UI and concepts of Bing4Free.CloudBox: This is a custom storage controller for DropBox. It lets you create multiple DropBox accounts an will then treat them as one large storage. Controller2: Projeto para desenvolvimento de Sistema para o Projeto Integrador do Curso de Análise e Desenvolvimento de Sistemas do CesumarCurso_Virtual_FPSEP: En este proyecto se esta elaborando el sistema para el manejo de un curso virtual que se tiene pensado impartir en la CFE, este curso se esta desarrollando bajo el mando del Ingeniero Earl Amazurrutia Carson y esta dirigido para el personal de protecciones.DBSJ: testEveTools: EveTools is a set of classes to aid in the development of programs that access the EVE Online API. It is written with a very event-driven model; all normally blocking, non-compute-bound workloads will instead run asynchronously, freeing up your program to do as it pleases!GeoIp: .Net MaxMind GeoIP client libraryKieuHungProject: Doan Vien managmentMimoza: ?????? ??? ????? ?????????, ??????? ????? ???????????? ??? ?????? ????????? ???????????? ?? ?????? ??????...mmoss: Medical Marijuana Open Source System. To manage Point-of-sale, inventory, grow and compliance issues related to the sale of MMJNetCassa: .Net Cassandra client library.Neudesic Pulse SDK: The Neudesic Pulse SDK allows developers the ability to quickly and efficiently build solutions that interact with the Neudesic Pulse social framework APIs.Nuget Package Creation and Publishing Wizard: simplifies the creation and publishing of an nuget packagePetscareinlondon: This project is all about pets care.Pool based Batch Processing: A simple framework that allows pool based processing of batches. A new batch is picked up when pools are empty. The framework exposes simple events that allows user to process jobs at the back end (Windows Service).Project Nonnon: Keep-It-Simple Softwares for Win32 MinGW GCC 3.x C Language + Batch Files POSIX-based Base Layer Library Win32 Applications Easy2Compile Easy2Make Easy2Use Python Tools for Visual Studio: Python Tools for Visual Studio adds support for Intellisense, Debugging, Profiling, IPython (.11+), Cluster & Cloud Computing to Visual Studio. It supports both CPython (2.4-3.1) and IronPython (2.7). python_lib: like protobuf,parse xml definition of c++struct,and develop lots of usageRapidMEF: A collection of tools to help developers author and debug applications that use MEF.Reflective: Reflective adds lots of new extension methods related to reflection and Reflection.Emit, to make it easier to build code dynamically at runtime.Remote Desktop Organizer: This is a fun little application that lets you easily manage lots of different Remote Desktops. It allows the user to apply custom alias's and descriptions so that it is easy denote which desktop is which and allows for easy customization and managementSharePoint data population: SharePoint data populationSpriteEditor: Basic sprite editorStock3243254635254325435: 345234324324324324Time Management Application: Based upon Stephen Covey's 7 Habits of Highly Effective People, I was looking for a place to digitally record my time. When I could not find one I liked, I set out to build my own. This also covers several of the coding practices and patterns that I have been putting together.Tuned N: Tuned N is a Playlist.com based media application. Allows listening to playlists via desktop app and allows downloading of tracks in playlists.Winforms BetterBindingSource: A better windows forms (winforms) bindingsource control which enables you to add class based datasources without the hassle of adding datasource files and using the slow wizard to add data sources.WinShutdown: Just a small application to countdown the windows shutdown/restart. When you want the windows shutdown after some time or after some application finishes its work. Please if you have a better project for this purpouse or if you have an update for my code. Let me know.

    Read the article

  • is it good to have or difference between ADSL Modem+WiFi Router and Separate ADSL Modem & Wi-Fi Router?

    - by vikas devde
    I have ADSL2 Modem which I got from my service provider, now I want to setup wireless(Wi-Fi) in my home. I went to shop, where I came to know that there are routers which come up with modem also but they are priced lil higher than the only wi-fi routers. Now it is obvious that I should go for only wi-fi one, as I already have modem. My question is, is there any difference between ADSL+router and only router? I think if I use ADSL+router, the speed will increase lilbit, as modem does modulate and demodulate signals, and router also generates wireless signal, that is time to take conversions is doubled, and if I use ADSL+modem, it will directly convert the signals to wireless, and time will be saved, so the overall speed will increase lilbit. This is what my concept is(Which might be wrong). What do you guys would suggest me? should I take my current modem away and buy an ADSL+router or I should keep my modem and buy only wi-fi one. Please tell me the difference and suggest me which one I should go with, and also suggest me which company router I should go for.

    Read the article

  • Can I get ethernet out of my Verizon FIOS set-top box?

    - by Tom Hughes
    Setup: my home network is long & skinny, and the FIOS-connected router is all the way at one of the apartment. At the other end, far away (and a floor higher) is my HD TV, which gets a cable-TV signal from a Verizon set-top box that is coax-connected back to the FIOS on-premises equipment. Wi-Fi won't work, the apartment is too stretched out, with old, thick walls and floors. Goal: I think there are three ways to get ethernet back to where the HD TV is: 1) run a cable! this isn't crazy but isn't cheap either (my building won't let me do it, it involves hiring an electrician because the cable would run partly through the public hallway ceiling) 2) split the coax near the TV and put in... a MoCA device? 3) somehow tease the set-top box, which has an RJ-11 (ethernet) port on the back, to give me network access. Question: any other choices? and, is one choice better than the others? #3 is by far the most desirable because it would involve the least wiring -- but I can't find any resources to help make it happen. #2 is a bit scary, I don't want to degrade service to the TV or anywhere else for that matter.

    Read the article

  • PC won't boot after hanging during Windows 8 automatic repair [closed]

    - by Mun
    I've got a custom built PC using an ASUS P5E motherboard and Intel Q6600 CPU. I plugged in my mp3 player to the USB port yesteday, and when I came back to the machine after about an hour or so, the Windows 8 automatic repair message was on the screen. It seemed to stick there for an hour, after which I decided to just hit reset and try and figure out what was going on. However, the machine rebooted to a black screen before even getting to the BIOS, with the monitor lights just blinking indicating there was no signal. Tried powering down completely, waiting a few minutes and then powering back up again with no difference; black screen with monitor lights blinking. Tried leaving it on for a while and then pinging from another machine or accessing it via something like LogMeIn, but everything showed the machine as being offline. There were also no error beeps or anything like that. Also tried unplugging all of the memory and rebooting and that also caused no error beeps. Removed one of the display cards and left the other one in there, and still only a black screen. I'm inclined to think that the motherboard or CPU is fried, but there is no indication of damage on any components and the CPU fan seems to be working fine as it always has, so overheating seems unlikely. It's also plugged into a surge protector. The motherboard also has a green light which still lights up. As everything was still working fine before hitting the reset button during Windows 8 automatic repair screen, at which point everything stopped working, it seems unlikely that this problem is down to component failure. Has anyone else experienced anything like this or have any ideas on what could be causing this behavior?

    Read the article

  • MacBook Pro (OSX Lion) - shutdown automatically before reaching login screen

    - by mkk
    When I try to lunch my MacBook Pro I can see a progress bar on loading screen. It goes to 1/15 or something like this and then it shut downs - I cannot reach even login screen. It happened to me 2 months ago, I have 'fixed' this by formatting my hard drive and installing OSX (Lion) again. This time I think that situation is a little bit different - I am able to enter single-user mode by pressing cmd + s. I then type /sbin/fsck -yf, I get the error: ** Checking Journaled HFS Plus volume. The volume name is Macintosh HD ** Checking extents overflow file. ** Checking catalog file. Invalid node structure (4, 24704) ** The volume Macintosh HD could not be verified completely. /dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8 but when I type exit, I can the login screen and I can log in. I tried a lot of things, booting from recovery partition and choosing disk utility to repair the disc, but I get error that it cannot be repaired. I have googled for hours and the only real solution I have found was to buy Disc warrior that might fix the issue. Any other suggestions? Secondary question is what causes this issue? I thought the reason are bad sectors, but Smart Utility haven't found any. I found suggestion that RAM could cause this kind of issue as well, so I downloaded rember and made memory test - all tests passed. Right now I have used my solution of entering single-mode user and then typing exit, however I am not sure how long it will 'work'. Of course I have back-uped what I considered important. Thanks for the help in advance! UPDATE: I guess Smart Utility was not very useful, I mnaged to get input/output error, which I believe is equivalent to bad sector.

    Read the article

  • Git fails to push with error 'out of memory'

    - by jwir3
    I'm using gitosis on a server that has a low amount of memory, specifically around 512 MB. When I try to push a large folder (happens to be a backup from an android phone), I get: me@corellia:~/Configs/$ git push origin master Counting objects: 18, done. Delta compression using up to 8 threads. Compressing objects: 100% (14/14), done. fatal: Out of memory, malloc failed MiB | 685 KiB/s error: pack-objects died of signal 13 error: failed to push some refs to 'git@dagobah:Configs' I've been searching the web, and notably found: http://www.mail-archive.com/[email protected]/msg01747.html as well as http://git.661346.n2.nabble.com/Out-of-memory-error-during-git-push-td5443705.html but these don't seem to help me for two reasons: 1) I am not actually out of memory when I push. When I run 'top' during the push, I get: 24262 git 18 0 16204 6084 1096 S 2 1.2 0:00.12 git-unpack-obje Also, during the push if I run /head/meminfo, I get: MemTotal: 524288 kB MemFree: 289408 kB Buffers: 0 kB Cached: 0 kB SwapCached: 0 kB Active: 0 kB Inactive: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 524288 kB So, it seems that I have enough memory free, but it's actually still failing, and I'm not enough of a git guru to figure out what is happening. I would appreciate it if someone could give me a hand here and tell me what could be causing this problem, and what I can do to solve it. Thanks! EDIT: The output of running the ulimit -a command: scottj@dagobah:~$ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 204800 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 10240 cpu time (seconds, -t) unlimited max user processes (-u) 204800 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited

    Read the article

  • nxclient crashes when trying to open a terminal from a remote client through "ssh -Y"

    - by user167328
    I support around 150 linux machines. I have 2 virtual machines on an ESXi server which I access via nxmachine v3 from a windows 7 box. These machines run CentOS5 with KDE and Lubuntu12.04.1 and they are the admin GUIs from which I support the 150 machines. The linux machines which I manage are redhat4/5, CentOS5 and ubuntu 10 and 12. Normally I contact the machines via ssh -Y. Today I did an ssh -Y to a remote machine which is running Ubuntu 12.10 and ssh 6.0p1. Then I tried to open an lxterminal on the remote machine which should display on my KDE desktop. This immediately and reproducably crashed my nxclient session. I tried again from my lubuntu system with the same effect. I have not observed the phenomenon from other machines yet. The message log on my KDE host shows: Unexpected termination of nxagent because of signal: 11 Logger::log nxnode 3920 Googling for this revealed no usable answer. Does anybody have a clue what is going on here or can give a hint how to solve the issue? Add On: I asked the user at the remote machine to export his DISPLAY to my host and open an lxterminal. This worked without problems i. e. the nxclient did not crash. Then the user tried to send me xeyes and this also killed the nxclient with the same error message found in the message log as above. This makes me suspect that the problem is not solely connected to ssh but maybe to some library stuff.

    Read the article

  • Blinking power button

    - by Mike Ramsey
    A friend asked me to look at his Gateway DX4640 desktop. When he presses the power button, power goes to the mobo (NVIDIA nForce 630i MCP73PV, GeForce 7100 chipset) and the CPU fan starts spinning. The power button slowely blinks on and off (blue) and the screen briefly says no signal and then goes black. And nothing else; no post code beeps. My initial two conjectures were: 1. Vista was stuck in sleep/hibernation mode, or 2. A power off had left the mobo in a bad state. The fix for both is to: a) Unplug the AC power cord b) hold the power button for 30 second to fully discharge the mobo It didn't help. I left the system unplugged from AC power for an hour. No change. I am out of ideas. Has anybody seen anything like this before? What does a blinking blue power button mean? How can I get more data points to guide trouble shooting? --Thank you, --Mike

    Read the article

  • Pre-startup segmentation fault with ptrace

    - by sfink
    I have somehow managed to mangle my computer so that any time I attempt to use something that uses ptrace to trace another process (eg strace, gdb), I get an immediate segmentation fault. For example: # strace /bin/true execve("/bin/true", ["/bin/true"], [/* 27 vars */]) = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- +++ killed by SIGSEGV +++ or with gdb: # gdb /bin/true GNU gdb Fedora (6.8-27.el5) Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu"... (no debugging symbols found) (gdb) run Starting program: /bin/true Program terminated with signal SIGSEGV, Segmentation fault. The program no longer exists. You can't do that without a process to debug. rpm -V comes up clean on strace, gdb, and glibc. I do not have any LD_* variables set, and PATH has nothing special in it.

    Read the article

  • Media Center setup won't complete for watching TV

    - by Robert
    I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro to watch TV and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing TV okay (with the new DirecTV) before I tried to run setup. (I ran setup to try to do recording with Media Center.) Hardware/Software: Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

    Read the article

  • How (in)secure are cell phones in reality?

    - by Aron Rotteveel
    I was recently re-reading an old Wired article about the Kaminsky DNS Vulnerability and the story behind it. In this article there was a quote that came across a little bit exaggerated to me: "The first thing I want to say to you," Vixie told Kaminsky, trying to contain the flood of feeling, "is never, ever repeat what you just told me over a cell phone." Vixie knew how easy it was to eavesdrop on a cell signal, and he had heard enough to know that he was facing a problem of global significance. If the information were intercepted by the wrong people, the wired world could be held ransom. Hackers could wreak havoc. Billions of dollars were at stake, and Vixie wasn't going to take any risks. When reading this I could not help but feel like it was a bit blown-up and theatrical. Now, I know absolutely nothing about cell phones and the security problems involved, but to my understanding, cell phone security has quite improved over the past few years. So my question is: how insecure are cell phones in reality? Are there any good articles that dig a bit deeper into this matter?

    Read the article

  • Two parts: linux startup script to connect to bluetooth and cron to keep it connected

    - by D.R.
    I have a mini bluetooth keyboard and a Raspberry Pi running a Debian-based distro. I know the MAC address of the keyboard but for this question, let's just use AA:BB:CC:DD:EE:FF. Right now I have to have a wired keyboard connected as well as my bluetooth dongle for the mini-keyboard and on the wired keyboard, I have to run the following when the device boots up: sudo hidd --connect AA:BB:CC:DD:EE:FF If the device goes idle for too long, then the bluetooth disconnects and I have to pull out my wired keyboard and retype that same command. What I'm looking for it a way to have that command run at startup and a way to sense if it gets disconnected so that it will auto reconnect. The annoying thing is that they keyboard has to be in pairing mode (even though it has already been paired) when I run that command, otherwise it tells me the host is down. So perhaps the script needs to prevent it from disconnecting due to inactivity, otherwise I'll have to put it back in pairing mode to reconnect. So to recap: - A script to connect at startup (I can make sure to put the keyboard into pairing mode before turning it on) - A script to prevent it from disconnecting (maybe some sort of signal to send to it every 60 seconds or something?) Any help with this is greatly appreciated! StackOverflow is always the best place to find answers to weird questions! I've been searching long and hard for an answer, but finally had to resort to coming here! Thanks!

    Read the article

  • How to use WPA2 client mode in the Linux-based Cisco WAP4410N access point

    - by joechip
    I have a Cisco WAP4410N access point that I want to use as a client to connect to a WPA2 wireless network (for WLAN service monitoring purposes). Supposedly this access point supports a "Wireless Client/Repeater" mode that allows to do this. The Repeater function is optional (I have that box unchecked so that nobody can connect to this access point wirelessly). I have verified through SSH that the access point gets configured as a client and not as a Master. But it never associates to the SSID I ask it to. This is what iwconfig shows: ath04 IEEE 802.11ng ESSID:"myownssid" Mode:Managed Channel:0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:14 dBm Sensitivity=1/3 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/94 Signal level=161/162 Noise level=161/161 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Although I've never done this from the command line, I suppose I could use wpa_supplicant or wpa_client to associate it, but I don't know how to do that without editing configuration files and the filesystem is readonly. Besides, I would have to run those commands manually after every reboot. I'd like to know how to do this the Cisco way, if possible. If not, any trick to make this work would be useful. Edit: This is with the latest firmware, 2.0.4.2. And I found that not all of the filesystem is readonly, since /var and /tmp are mounted with type ramfs.

    Read the article

  • pppd disconnects from 3G, doesn't reconnect, w/ persist set

    - by bytenik
    I am trying to configure pppd to connect to a 3G network (Sprint, in this case) and then stay connected, reconnecting automatically if the remote connection is terminated. I have enabled the persist option. My configuration file is as follows: hide-password noauth connect "/usr/sbin/chat -v -f /etc/chatscripts/cellular" debug /dev/cell 921600 defaultroute noipdefault user " " persist maxfail 0 lcp-echo-failure 10 lcp-echo-interval 60 holdoff 5 However, when the peer disconnects the connection, pppd often waits a long time (substantially more than my holdoff) to reconnect the modem -- if it ever reconnects at all! An example log showing this: May 23 05:17:24 00270e0a8888 pppd[2408]: rcvd [LCP TermReq id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: LCP terminated by peer May 23 05:17:24 00270e0a8888 pppd[2408]: Connect time 60.1 minutes. May 23 05:17:24 00270e0a8888 pppd[2408]: Sent 0 bytes, received 0 bytes. May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down started (pid 2456) May 23 05:17:24 00270e0a8888 pppd[2408]: sent [LCP TermAck id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down finished (pid 2456), status = 0x0 May 23 05:17:24 00270e0a8888 pppd[2408]: Hangup (SIGHUP) May 23 05:17:24 00270e0a8888 pppd[2408]: Modem hangup May 23 05:17:24 00270e0a8888 pppd[2408]: Connection terminated. May 23 05:17:24 00270e0a8888 pppd[2408]: Terminating on signal 15 May 23 05:17:24 00270e0a8888 pppd[2408]: Exit. May 23 06:08:07 00270e0a8888 pppd[2500]: pppd 2.4.5 started by root, uid 0 May 23 06:08:10 00270e0a8888 pppd[2500]: Script /usr/sbin/chat -v -f /etc/chatscripts/cellular finished (pid 2530), status = 0x0 May 23 06:08:10 00270e0a8888 pppd[2500]: Serial connection established. May 23 06:08:10 00270e0a8888 pppd[2500]: using channel 11 The disconnect at the request of the peer occurs at 5:17, but the reconnect didn't happen until 6:08. I had a friend monitoring the server so I'm not certain that this wasn't a manual reconnection. Either way, it either took almost an hour to reconnect or never reconnected. Shouldn't persist + holdoff 5 cause this to automatically reconnect after 5 seconds of the link terminating?

    Read the article

  • Optical Audio out stuck on on a MacBook

    - by Clinton Blackmore
    Apple have made an interesting headphone port for the MacBook (and some other Intel Mac models). It works like a standard jack: nothing plugged in - audio comes out of built-in speakers headphones/external speakers plugged in - plays through headphones/external speakers but you can also use a special adapter (which trips a tiny microswitch) to get an optical audio out signal (which you can presumably plug into a nice surround-sound system). This is all well and good except when, like auto-tracking, it doesn't work, and you are left with nothing to adjust. Users report that they get no sound when they have nothing plugged in and that a red light emanates from the headphone port. If you go to System Preferences - Sound - Output, it will say (IIRC) "Optical Out" instead of "Internal Speakers". The only solution I'm aware of is to try to reset the switch by inserting and removing a set of headphones or a toothpick, perhaps wiggling it inside of the port, and hoping that you luck out and get it. Are there other ways to fix this problem? Does anyone know where the microswitch is or have a good technique to reset it?

    Read the article

  • Windows XP only loads in VGA mode, and crashes when raising resolution

    - by Harel
    My kid's computer (Windows XP, SP3) started to (what appears to be) crash on boot. It will only boot in Safe or VGA mode, and if I try to raise the resolution from 640x480 it just reboots itself, and a error appears in the Event Log. When it loads up not in VGA mode, the monitor shuts off just after the windows logo is shown. It seems like windows is actually running but I can't see anything on screen (monitor is off for lack of signal). Nothing was installed recently that I know of, short of the usual windows updates. Thanks, Harel Below is the event log error: Event Type: Error Event Source: System Error Event Category: (102) Event ID: 1003 Date: 15/04/2012 Time: 16:27:11 User: N/A Computer: ----- Description: Error code 1000008e, parameter1 c0000005, parameter2 f745b0bf, parameter3 ede24f98, parameter4 00000000. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 53 79 73 74 65 6d 20 45 System E 0008: 72 72 6f 72 20 20 45 72 rror Er 0010: 72 6f 72 20 63 6f 64 65 ror code 0018: 20 31 30 30 30 30 30 38 1000008 0020: 65 20 20 50 61 72 61 6d e Param 0028: 65 74 65 72 73 20 63 30 eters c0 0030: 30 30 30 30 30 35 2c 20 000005, 0038: 66 37 34 35 62 30 62 66 f745b0bf 0040: 2c 20 65 64 65 32 34 66 , ede24f 0048: 39 38 2c 20 30 30 30 30 98, 0000 0050: 30 30 30 30 0000

    Read the article

  • CodePlex Daily Summary for Monday, June 17, 2013

    CodePlex Daily Summary for Monday, June 17, 2013Popular ReleasesKooboo CMS: Kooboo CMS 4.1.1: The stable release of Kooboo CMS 4.1.0 with fixed the following issues: https://github.com/Kooboo/CMS/issues/1 https://github.com/Kooboo/CMS/issues/11 https://github.com/Kooboo/CMS/issues/13 https://github.com/Kooboo/CMS/issues/15 https://github.com/Kooboo/CMS/issues/19 https://github.com/Kooboo/CMS/issues/20 https://github.com/Kooboo/CMS/issues/24 https://github.com/Kooboo/CMS/issues/43 https://github.com/Kooboo/CMS/issues/45 https://github.com/Kooboo/CMS/issues/46 https://github....VidCoder: 1.5.0 Beta: The betas have started up again! If you were previously on the beta track you will need to install this to get back on it. That's because you can now run both the Beta and Stable version of VidCoder side-by-side! Note that the OpenCL and Intel QuickSync changes being tested by HandBrake are not in the betas yet. They will appear when HandBrake integrates them into the main branch. Updated HandBrake core to SVN 5590. This adds a new FDK AAC encoder. The FAAC encoder has been removed and now...Wsus Package Publisher: Release v1.2.1306.16: Date/Time are displayed as Local Time. (Last Contact, Last Report and DeadLine) Wpp now remember the last used path for update publishing. (See 'Settings' Form for options) Add an option to allow users to publish an update even if the Framework has judged the certificate as invalid. (Attention : Using this option will NOT allow you to publish or revise an update if your certificate is really invalid). When publishing a new update, filter update files to ensure that there is not files wi...Employee Info Starter Kit: v6.0 - ASP.NET MVC Edition: Release Home - Getting Started - Hands on Coding Walkthrough – Technology Stack - Design & Architecture EISK v6.0 – ASP.NET MVC edition bundles most of the greatest and successful platforms, frameworks and technologies together, to enable web developers to learn and build manageable and high performance web applications with rich user experience effectively and quickly. User End SpecificationsCreating a new employee record Read existing employee records Update an existing employee reco...OLAP PivotTable Extensions: Release 0.8.1: Use the 32-bit download for... Excel 2007 Excel 2010 32-bit (even Excel 2010 32-bit on a 64-bit operating system) Excel 2013 32-bit (even Excel 2013 32-bit on a 64-bit operating system) Use the 64-bit download for... Excel 2010 64-bit Excel 2013 64-bit Just download and run the EXE. There is no need to uninstall the previous release. If you have problems getting the add-in to work, see the Troubleshooting Installation wiki page. The new features in this release are: View #VALUE! Err...DirectXTex texture processing library: June 2013: June 15, 2013 Custom filtering implementation for Resize & GenerateMipMaps(3D) - Point, Box, Linear, Cubic, and Triangle TEX_FILTER_TRIANGLE finite low-pass triangle filter TEX_FILTER_WRAP, TEX_FILTER_MIRROR texture semantics for custom filtering TEX_FILTER_BOX alias for TEX_FILTER_FANT WIC Ordered and error diffusion dithering for non-WIC conversion sRGB gamma correct custom filtering and conversion DDS_FLAGS_EXPAND_LUMINANCE - Reader conversion option for L8, L16, and A8L8 legacy ...WPF Application Framework (WAF): WPF Application Framework (WAF) 3.0.0.440: Version: 3.0.0.440 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Please build the whole solution before you start one of the sample applications. Requirements .NET Framework 4.5 (The package contains a solution file for Visual Studio 2012) Changelog Legend: [B] Breaking change; [O] Marked member as obsolete Samples: Use ValueConverters via StaticResource instead of x:Static. Other Downloads Downloads OverviewWatchersNET.TagCloud: WatchersNET.TagCloud 02.02.03: changes Common Words are limited to the current PortalSFDL.NET: SFDL.NET v1.1.0.5: Changelog: Implemeted SFDL Container v4 (AES Encryption, Set Character Set) Added Stopwatch (download time) Many Bugfixes and ImprovementsBlackJumboDog: Ver5.9.1: 2013.06.13 Ver5.9.1 (1) Web??????SSI?#include???、CGI?????????????????????? (2) ???????????????????????????Lakana - WPF Framework: Lakana V2.1 RTM: - Dynamic text localization - A new application wide message busFree language translator and file converter: Free Language Translator 3.3: some bug fixes and a new link to video tutorials on Youtube.Pokemon Battle Online: ETV: ETV???2012?12??????,????,???????$/PBO/branches/PrivateBeta??。 ???????bug???????。 ???? Server??????,?????。 ?????????,?????????????,?????????。 ????????,????,?????????,???????????(??)??。 ???? ????????????。 ???????。 ???PP????,????????????????????PP????,??3。 ?????????????,??????????。 ???????? ??? ?? ???? ??? ???? ?? ?????????? ?? ??? ??? ??? ???????? ???? ???? ???????????????、???????????,??“???????”??。 ???bug ???Modern UI for WPF: Modern UI 1.0.4: The ModernUI assembly including a demo app demonstrating the various features of Modern UI for WPF. Related downloads NuGet ModernUI for WPF is also available as NuGet package in the NuGet gallery, id: ModernUI.WPF Download Modern UI for WPF Templates A Visual Studio 2012 extension containing a collection of project and item templates for Modern UI for WPF. The extension includes the ModernUI.WPF NuGet package. DownloadToolbox for Dynamics CRM 2011: XrmToolBox (v1.2013.6.11): XrmToolbox improvement Add exception handling when loading plugins Updated information panel for displaying two lines of text Tools improvementMetadata Document Generator (v1.2013.6.10)New tool Web Resources Manager (v1.2013.6.11)Retrieve list of unused web resources Retrieve web resources from a solution All tools listAccess Checker (v1.2013.2.5) Attribute Bulk Updater (v1.2013.1.17) FetchXml Tester (v1.2013.3.4) Iconator (v1.2013.1.17) Metadata Document Generator (v1.2013.6.10) Privilege...Document.Editor: 2013.23: What's new for Document.Editor 2013.23: New Insert Emoticon support Improved Format support Minor Bug Fix's, improvements and speed upsChristoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.4 for VS2012: V2.4 - Release Date 6/10/2013 Items addressed in this 2.4 release Updated MSBuild Community Tasks reference to 1.4.0.61 Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesLayered Architecture Sample for .NET: Leave Sample - June 2013 (for .NET 4.5): Thank You for downloading Layered Architecture Sample. Please read the accompanying README.txt file for setup and installation instructions. This is the first set of a series of revised samples that will be released to illustrate the layered architecture design pattern. This version is only supported on Visual Studio 2012. This set contains 2 samples that illustrates the use of: ASP.NET Web Forms, ASP.NET Model Binding, Windows Communications Foundation (WCF), Windows Workflow Foundation (W...Papercut: Papercut 2013-6-10: Feature: Shows From, To, Date and Subject of Email. Feature: Async UI and loading spinner. Enhancement: Improved speed when loading large attachments. Enhancement: Decoupled SMTP server into secondary assembly. Enhancement: Upgraded to .NET v4. Fix: Messages lost when received very fast. Fix: Email encoding issues on display/Automatically detect message Encoding Installation Note:Installation is copy and paste. Incoming messages are written to the start-up directory of Papercut. If you do n...Supporting Guidance and Whitepapers: v1.BETA Unit test Generator Documentation: Welcome to the Unit Test Generator Once you’ve moved to Visual Studio 2012, what’s a dev to do without the Create Unit Tests feature? Based on the high demand on User Voice for this feature to be restored, the Visual Studio ALM Rangers have introduced the Unit Test Generator Visual Studio Extension. The extension adds the “create unit test” feature back, with a focus on automating project creation, adding references and generating stubs, extensibility, and targeting of multiple test framewor...New ProjectsAccord.NET Framework: Scientific computing, machine learning and computer vision framework.AllegroSharp: Biblioteka zapewniajaca obsluge serwisu aukcyjnego Allegro.pl w oparciu o udostepniona publicznie usluge Allegro Web API.Blindmap: A simple handy distraction-free mind-mapping tool for desktop/laptop Windows XP/7/8 PCs.Cryptosolic - The Cryptography & Software Licensing Framework for .Net: Cryptosolic is an Open Source Cryptography & Software Licensing Framework for .Net. More Information and Downloads available soon.DSM Web API: The "DSM Web API" project provides portable libraries to call the APIs exposed by a Synology's NAS running the DSM system.everynetsvn: this is a summary description.Extension Library: Provides a library of extension methods for commonly used .NET objects.Finance: this is a new projectFlight: A simple flight simulator with basic physics. Written in Java using the Processing library.gerencia2: This project is about a test of codeplex use whit a smal group of people, actually just two.GMFrameworkForBlog: MVC,EF,Framework,GMFHad: Had jean0617changbranch: jean0617changbranchLCC Handler V1.0: Complete software pack to handle Local Cheque Collection activities in Branches in India and abroad. This small software can handle folowing activities;Mdelete API: Delete all files and directores in windows shell. Support long path (less then 32000 chars) and network path (eg. \\server\share or \\127.0.0.1\share)Model View ViewModel with Controller: Build applications based on the Model-View-ViewModel philosophy! MySQL Connect 2 ASP.NET: Example project to show how to connect MySQL database to ASP.NET web project. IDE: Visual Studio 2010 Pro Programming language: C# Detailed information in the article here: http://epavlov.net/blog/2011/11/13/connect-to-mysql-in-visual-studio/ NEaTly Documented Code: NEaTly Documented Code helps documenting source code by taking comments directly from sources and by formatting them in a easy-to-read way. This is perfect for programming blog, for example. This project is inspired by (but not based on) Beautifully Documented Codenewsalert: this is a news alert project description.On-Screen Keyboard: An OnScreen Keyboad that accept both inputs of keyboard and mousePHP DocBlock Generator: Creates missing docblocks.Puzzle: Puzzle game. Add your image and hace fun! ;)QuickUIT: QuickUIT, short for 'Quick User Interface Testing', is an API for testing applications based on the Microsoft UI Automation framework. QuickUIT provides a simple, object-oriented interface for finding and interacting with automation elements. It is developed in C#. RapidXNA: A simple framework that aims to make starting up new XNA projects for Windows, Xbox 360 and Windows Phone 7 easier. Using RapidXNA you should be able to easily port between the 3 platforms with only minor code changes to your projects.Send HTML Wizard: Wizard to send a local html page, including referenced files, as emailSetup for Converting OLM to PST with Outlook OLM File Exporter: You can convert files from OLM to PST to access Mac Outlook on Windows Outlook using the Outlook Mac Exporter. Tool can be availed in FREE Download.Signalbox: Train dispatching simulation.Store Front: Welcome to store front this is going to built for the community by the community im sick of not having a word press style system in asp.net form for developers TLS: TLSTorrent & Podcast plugins: My Podcasts and My Torrents plugins for MediaPortalTorrentSimulation: This is a student project as academic activities.UnitXMLEditor: UnitXMLEditoruVersionClientCache: uVersionClientCache is a custom macro to always automatically version (URL querstring parameter) your files based on a MD5 hash of the file contents or file last modified date to prevent issues with client browsers caching an old file after you have changed it.Video Katalog: Upravljanje arhivom video materijalaVpNet binding for SignalR: VPNET for SignalR is a binding to Microsoft SignalR JQuery web socket implementation.Warlab: ???????????? ?????? ?? ??????WPF Diagram Designer Resourse: WPF Diagram Designer Resourse

    Read the article

  • Unable to specify parameters to cvlc in a script

    - by VxJasonxV
    I'm creating a script that issues a few curl commands in order to access a time-protected mms stream link, then set up a relay using cvlc (vlc's command line interface) for my own use on an unencumbered player. The curl aspect of this is working, as I can run as a browser and curl side by side and get the same access url. (It's time locked meaning the stream will work forever, but you have to connect quickly or the URL will time out.) The very end of the script prints the command I will run, which is then followed up by "exec $CMD". When I echo $CMD I get: cvlc --sout '#standard{access=http,mux=asf,dst=0.0.0.0:58194}' mms://[...] Manually Copy/Pasting this command in, verbatim, works perfectly fine, but as part of a script, the cvlc execution output says: [0x9743d0] main interface error: no suitable interface module [0x962120] main libvlc error: interface "globalhotkeys,none" initialization failed [0x9743d0] dummy interface: using the dummy interface module... [0xb16e30] stream_out_standard stream out error: no mux specified or found by extension [0xb16ad0] main stream output error: stream chain failed for `standard{mux="",access="",dst="'#standard{access=http,mux=asf,dst=0.0.0.0:58194}'"}' [0xb11cd0] main input error: cannot start stream output instance, aborting [0xb11f70] signals interface error: Caught Interrupt signal, exiting... Why is --sout behaving one way in a script (non-interactive shell?) vs. another way in the foreground (interactive shell) ?

    Read the article

  • Office 2010: It&rsquo;s not just DOC(X) and XLS(X)

    - by andrewbrust
    Office 2010 has released to manufacturing.  The bits have left the (product team’s) building.  Will you upgrade? This version of Office is officially numbered 14, a designation that correlates with the various releases, through the years, of Microsoft Word.  There were six major versions of Word for DOS, during whose release cycles came three 16-bit Windows versions.  Then, starting with Word 95 and counting through Word 2007, there have been six more versions – all for the 32-bit Windows platform.  Skip version 13 to ward off folksy bad luck (and, perhaps, the bugs that could come with it) and that brings us to version 14, which includes implementations for both 32- and 64-bit Windows platforms.  We’ve come a long way baby.  Or have we? As it does every three years or so, debate will now start to rage on over whether we need a “14th” version the PC platform’s standard word processor, or a “13th” version of the spreadsheet.  If you accept the premise of that question, then you may be on a slippery slope toward answering it in the negative.  Thing is, that premise is valid for certain customers and not others. The Microsoft Office product has morphed from one that offered core word processing, spreadsheet, presentation and email functionality to a suite of applications that provides unique, new value-added features, and even whole applications, in the context of those core services.  The core apps thus grow in mission: Excel is a BI tool.  Word is a collaborative editorial system for the production of publications.  PowerPoint is a media production platform for for live presentations and, increasingly, for delivering more effective presentations online.  Outlook is a time and task management system.  Access is a rich client front-end for data-driven self-service SharePoint applications.  OneNote helps you capture ideas, corral random thoughts in a semi-structured way, and then tie them back to other, more rigidly structured, Office documents. Google Docs and other cloud productivity platforms like Zoho don’t really do these things.  And there is a growing chorus of voices who say that they shouldn’t, because those ancillary capabilities are over-engineered, over-produced and “under-necessary.”  They might say Microsoft is layering on superfluous capabilities to avoid admitting that Office’s core capabilities, the ones people really need, have become commoditized. It’s hard to take sides in that argument, because different people, and the different companies that employ them, have different needs.  For my own needs, it all comes down to three basic questions: will the new version of Office save me time, will it make the mundane parts of my job easier, and will it augment my services to customers?  I need my time back.  I need to spend more of it with my family, and more of it focusing on my own core capabilities rather than the administrative tasks around them.  And I also need my customers to be able to get more value out of the services I provide. Help me triage my inbox, help me get proposals done more quickly and make them easier to read.  Let me get my presentations done faster, make them more effective and make it easier for me to reuse materials from other presentations.  And, since I’m in the BI and data business, help me and my customers manage data and analytics more easily, both on the desktop and online. Those are my criteria.  And, with those in mind, Office 2010 is looking like a worthwhile upgrade.  Perhaps it’s not earth-shattering, but it offers a combination of incremental improvements and a few new major capabilities that I think are quite compelling.  I provide a brief roundup of them here.  It’s admittedly arbitrary and not comprehensive, but I think it tells the Office 2010 story effectively. Across the Suite More than any other, this release of Office aims to give collaboration a real workout.  In certain apps, for the first time, documents can be opened simultaneously by multiple users, with colleagues’ changes appearing in near real-time.  Web-browser-based versions of Word, Excel, PowerPoint and OneNote will be available to extend collaboration to contributors who are off the corporate network. The ribbon user interface is now more pervasive (for example, it appears in OneNote and in Outlook’s main window).  It’s also customizable, allowing users to add, easily, buttons and options of their choosing, into new tabs, or into new groups within existing tabs. Microsoft has also taken the File menu (which was the “Office Button” menu in the 2007 release) and made it into a full-screen “Backstage” view where document-wide operations, like saving, printing and online publishing are performed. And because, more and more, heavily formatted content is cut and pasted between documents and applications, Office 2010 makes it easier to manage the retention or jettisoning of that formatting right as the paste operation is performed.  That’s much nicer than stripping it off, or adding it back, afterwards. And, speaking of pasting, a number of Office apps now make it especially easy to insert screenshots within their documents.  I know that’s useful to me, because I often document or critique applications and need to show them in action.  For the vast majority of users, I expect that this feature will be more useful for capturing snapshots of Web pages, but we’ll have to see whether this feature becomes popular.   Excel At first glance, Excel 2010 looks and acts nearly identically to the 2007 version.  But additional glances are necessary.  It’s important to understand that lots of people in the working world use Excel as more of a database, analytics and mathematical modeling tool than merely as a spreadsheet.  And it’s also important to understand that Excel wasn’t designed to handle such workloads past a certain scale.  That all changes with this release. The first reason things change is that Excel has been tuned for performance.  It’s been optimized for multi-threaded operation; previously lengthy processes have been shortened, especially for large data sets; more rows and columns are allowed and, for the first time, Excel (and the rest of Office) is available in a 64-bit version.  For Excel, this means users can take advantage of more than the 2GB of memory that the 32-bit version is limited to. On the analysis side, Excel 2010 adds Sparklines (tiny charts that fit into a single cell and can therefore be presented down an entire column or across a row) and Slicers (a more user-friendly filter mechanism for PivotTables and charts, which visually indicates what the filtered state of a given data member is).  But most important, Excel 2010 supports the new PowerPIvot add-in which brings true self-service BI to Office.  PowerPivot allows users to import data from almost anywhere, model it, and then analyze it.  Rather than forcing users to build “spreadmarts” or use corporate-built data warehouses, PowerPivot models function as true columnar, in-memory OLAP cubes that can accommodate millions of rows of data and deliver fast drill-down performance. And speaking of OLAP, Excel 2010 now supports an important Analysis Services OLAP feature called write-back.  Write-back is especially useful in financial forecasting scenarios for which Excel is the natural home.  Support for write-back is long overdue, but I’m still glad it’s there, because I had almost given up on it.   PowerPoint This version of PowerPoint marks its progression from a presentation tool to a video and photo editing and production tool.  Whether or not it’s successful in this pursuit, and if offering this is even a sensible goal, is another question. Regardless, the new capabilities are kind of interesting.  A greatly enhanced set of slide transitions with 3D effects; in-product photo and video editing; accommodation of embedded videos from services such as YouTube; and the ability to save a presentation as a video each lay testimony to PowerPoint’s transformation into a media tool and away from a pure presentation tool. These capabilities also recognize the importance of the Web as both a source for materials and a channel for disseminating PowerPoint output. Congruent with that is PowerPoint’s new ability to broadcast a slide presentation, using a quickly-generated public URL, without involving the hassle or expense of a Web meeting service like GoToMeeting or Microsoft’s own LiveMeeting.  Slides presented through this broadcast feature retain full color fidelity and transitions and animations are preserved as well.   Outlook Microsoft’s ubiquitous email/calendar/contact/task management tool gains long overdue speed improvements, especially against POP3 email accounts.  Outlook 2010 also supports multiple Exchange accounts, rather than just one; tighter integration with OneNote; and a new Social Connector providing integration with, and presence information from, online social network services like LinkedIn and Facebook (not to mention Windows Live).  A revamped conversation view now includes messages that are part of a given thread regardless of which folder they may be stored in. I don’t know yet how well the Social Connector will work or whether it will keep Outlook relevant to those who live on Facebook and LinkedIn.  But among the other features, there’s very little not to like.   OneNote To me, OneNote is the part of Office that just keeps getting better.  There is one major caveat to this, which I’ll cover in a moment, but let’s first catalog what new stuff OneNote 2010 brings.  The best part of OneNote, is the way each of its versions have managed hierarchy: Notebooks have sections, sections have pages, pages have sub pages, multiple notes can be contained in either, and each note supports infinite levels of indentation.  None of that is new to 2010, but the new version does make creation of pages and subpages easier and also makes simple work out of promoting and demoting pages from sub page to full page status.  And relationships between pages are quite easy to create now: much like a Wiki, simply typing a page’s name in double-square-brackets (“[[…]]”) creates a link to it. OneNote is also great at integrating content outside of its notebooks.  With a new Dock to Desktop feature, OneNote becomes aware of what window is displayed in the rest of the screen and, if it’s an Office document or a Web page, links the notes you’re typing, at the time, to it.  A single click from your notes later on will bring that same document or Web page back on-screen.  Embedding content from Web pages and elsewhere is also easier.  Using OneNote’s Windows Key+S combination to grab part of the screen now allows you to specify the destination of that bitmap instead of automatically creating a new note in the Unfiled Notes area.  Using the Send to OneNote buttons in Internet Explorer and Outlook result in the same choice. Collaboration gets better too.  Real-time multi-author editing is better accommodated and determining author lineage of particular changes is easily carried out. My one pet peeve with OneNote is the difficulty using it when I’m not one a Windows PC.  OneNote’s main competitor, Evernote, while I believe inferior in terms of features, has client versions for PC, Mac, Windows Mobile, Android, iPhone, iPad and Web browsers.  Since I have an Android phone and an iPad, I am practically forced to use it.  However, the OneNote Web app should help here, as should a forthcoming version of OneNote for Windows Phone 7.  In the mean time, it turns out that using OneNote’s Email Page ribbon button lets you move a OneNote page easily into EverNote (since every EverNote account gets a unique email address for adding notes) and that Evernote’s Email function combined with Outlook’s Send to OneNote button (in the Move group of the ribbon’s Home tab) can achieve the reverse.   Access To me, the big change in Access 2007 was its tight integration with SharePoint lists.  Access 2010 and SharePoint 2010 continue this integration with the introduction of SharePoint’s Access Services.  Much as Excel Services provides a SharePoint-hosted experience for viewing (and now editing) Excel spreadsheet, PivotTable and chart content, Access Services allows for SharePoint browser-hosted editing of Access data within the forms that are built in the Access client itself. To me this makes all kinds of sense.  Although it does beg the question of where to draw the line between Access, InfoPath, SharePoint list maintenance and SharePoint 2010’s new Business Connectivity Services.  Each of these tools provide overlapping data entry and data maintenance functionality. But if you do prefer Access, then you’ll like  things like templates and application parts that make it easier to get off the blank page.  These features help you quickly get tables, forms and reports built out.  To make things look nice, Access even gets its own version of Excel’s Conditional Formatting feature, letting you add data bars and data-driven text formatting.   Word As I said at the beginning of this post, upgrades to Office are about much more than enhancing the suite’s flagship word processing application. So are there any enhancements in Word worth mentioning?  I think so.  The most important one has to be the collaboration features.  Essentially, when a user opens a Word document that is in a SharePoint document library (or Windows Live SkyDrive folder), rather than the whole document being locked, Word has the ability to observe more granular locks on the individual paragraphs being edited.  Word also shows you who’s editing what and its Save function morphs into a sync feature that both saves your changes and loads those made by anyone editing the document concurrently. There’s also a new navigation pane that lets you manage sections in your document in much the same way as you manage slides in a PowerPoint deck.  Using the navigation pane, you can reorder sections, insert new ones, or promote and demote sections in the outline hierarchy.  Not earth shattering, but nice.   Other Apps and Summarized Findings What about InfoPath, Publisher, Visio and Project?  I haven’t looked at them yet.  And for this post, I think that’s fine.  While those apps (and, arguably, Access) cater to specific tasks, I think the apps we’ve looked at in this post service the general purpose needs of most users.  And the theme in those 2010 apps is clear: collaboration is key, the Web and productivity are indivisible, and making data and analytics into a self-service amenity is the way to go.  But perhaps most of all, features are still important, as long as they get you through your day faster, rather than adding complexity for its own sake.  I would argue that this is true for just about every product Microsoft makes: users want utility, not complexity.

    Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >