Search Results

Search found 56081 results on 2244 pages for 'working directory'.

Page 198/2244 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

  • Slow draw on some apps and dynamic clocks not working properly with ATI/AMD proprietary drivers

    - by Rakeka
    I've recently purchased a new computer (around July 2010) and I've been having some problems with proprietary video drivers on Linux. The hardware is: Video: ATI/AMD Radeon HD 5870 (XFX HD-587X-ZNFC); Motherboard: Asus P7P55D-E Deluxe; Processor: Intel i5 750; Memory: Kingston Hyperx KHX1600C8D3K2/4GX (2x - 8GB Total); Power Supply: XFX P1-750B-CAG9; There are no overclocks, not even the memories (they are at 1333mhz due processor memory controller limitation). The operational system is a homebrew Linux distribution with the following software: Architecture: x86_64 (multilib) Kernel: 2.6.35.10 Xorg: 7.5 Window Manager: wmii-3.9.2 Video Driver: ATI/AMD Catalyst 10.12 There are no desktop effects programs like compiz fusion or beryl. The problems: With ATI/AMD proprietary driver, some applications are with slow draw/redraw, and, the same applications make the driver to increase the card clocks to maximum (0% gpu activity, only the clocks are increased). I dunno exactly how to describe the slow draw but I'll list some applications and symptoms. xterm Flickers a lot when drawing continuous output; When I'm in a workspace with fullscreen xterm, The gpu load stays at 12% in idle, and, with smaller xterm, smaller GPU load. "aticonfig --odgc" output: Default Adapter - ATI Radeon HD 5800 Series Core (MHz) Memory (MHz) Current Clocks : 157 300 Current Peak : 850 1200 Configurable Peak Range : [600-900] [900-1300] GPU load : 12% "aticonfig --pplib-cmd 'get activity'" output: Current Activity is Core Clock: 157MHZ Memory Clock: 300MHZ VDDC: 950 Activity: 12 percent Performance Level: 0 Bus Speed: 5000 Bus Lanes: 16 Maximum Bus Lanes: 16 More examples: mplayer time info flickers on terminal; "find /" flickers a lot (It takes some time to stop with control-c. But, If I change the workspace or put some window upon it, just after the control-c, it stops instantly); "cat somefile" if the file is big (Xorg.0.log for example) it takes some time to display; vim and less (ex: find / | less) don't have much problems, just a little flicker when scrolling; mplayer (no gui) Slow reproduction and seek with -vo x11; Tearing with -vo xv; Time info flickers on terminal (xterm consequence); gvim A little slow draw when scrolling with page up/page down; Firefox Slow draw/redraw on some pages like www.boadica.com.br and sometimes on www.youtube.com with flash enable (never noticed on many pages); Corruptions when informative yellow boxes are showing and scroll the page (an gray box appears at the same place of the informative box); "Wallpaper" After minimizing a fullscreen window or changing to an empty workspace it takes some time to redraw wallpaper. "Video Card" The core and memory clocks are increased with the events described above and on other situations like change workspace (even without wallpaper), minimize, maximize or move a window; Idle clocks: Core: 157mhz, Memory: 300mhz Full clocks: Core: 850mhz, Memory: 1200mhz xpdf Painful slow scrolling; display (from ImageMagick) Slow menus and sometimes slow image redraw; Programs that I use and are apparently without problems: gimp; pidgin; mplayer (-vo gl, gl2); blender; unigine heaven (better fps than on Windows); doom3; tibia; penumbra overture; amnesia the dark descent (wine); diablo 2 (wine); No problems on Windows (Windows 7 Ultimate 64bit). And special note to this: Full desktop effects from Debian and Ubuntu gnome appearance cpanel don't cause ANY problems, even the core and memory clocks don't increase when change workspace, minimize, maximize or move a window. What I've tested: Unsuccessful tests: Tested all drivers versions since 10.6 (released approximately when I've installed the first slackware in this PC); Tested other video card - ATI/AMD Radeon HD 5570 (XFX HD-557X-ZHF2); Tested some options on xorg.conf and that I've found googling (some of these options are commented on my xorg.conf. I'll send the links at the end of post); Tested some patches like 107_fedora_dont_fill_bg_none.patch and xserver-xorg-backclear.patch from Arch Linux Catalyst page (https://wiki.archlinux.org/index.php/ATI_Catalyst); Tested other distros and software versions: Tested XORG-7.6 on my own distribution; Tested Debian Squeeze (testing - from 2010-12-20); Tested Ubuntu Marverick (10.10); Tested Slackware 13.1; Distros info: Architecture: i386 Debian and Ubuntu with all default software (kernel, gnome, xorg, drivers); Slackware with Catalyst from AMD page and default window managers like: fvwm, xfce, and my own build of wmii; Successful tests: Tested other video card (only on my homebrew distro) - NVIDIA Geforce 7300GS with driver 260.19.29; That didn't shown the slow draw problems, but that card is a bit obsolete, so, dunno if that lacks features like the dynamic clocks. I don't dispose of other video cards like nvidia g/gt/gts/gtx 200~400~500 or Radeon HD 3000/4000/6000 to make more tests. Tested other hardware: Video: ATI/AMD Radeon HD 5570 (XFX HD-557X-ZHF2); Motherboard: Intel DG31PR; Processor: Core 2 Duo E6750; Software for that hardware: Fresh install of same distros (except for the mine) with same program versions; That video card (HD 5570) were full time at the maximum clocks (something like 500/750, don't remember) in all the operational systems (Windows XP and Windows 7 too), but it didn't shown the same problems that I have here. I've googled a lot about common problems with ATI/AMD proprietary drivers for Linux and didn't find similar problems, except by the Firefox corruptions, that the solutions were to disable ATI Direct2DAccel and use XAA. With XAA the problems persists and the other applications like pidgin and rest of Firefox showed the same problems of slow draw/redraw. Open source Drivers: With open source drivers (xf86-video-ati-6.13.2) I hadn't the same slow draw problems, but, had other problems, that, for now, make it no viable solution. I'll not discuss it here because this is another line of problems and will confuse everything. If it happens to be the only solution, I'll make another thread to discuss it. Logs and Configs: kernel .config dmesg xorg package list xorg.conf Xorg.0.log

    Read the article

  • openSSL tutorial not fully working - Can sign but cannot restore original file

    - by djechelon
    I'm writing, and testing, a little tutorial for my groupmates involved in an openSSL homework. We have a bunch of PDF files, I'm the CA and each one should send me a signed PDF for me to be verified. I've told them to do the following (and tried to do it by myself) Request and obtain a certificate (I'll skip this part) Create a MIME message with the PDF file in it makemime -c "text/pdf" -a "Content-Disposition: attachment; filename=”Elaborato.pdf" Elaborato.pdf > Elaborato.pdf.msg Sign with openSSL openssl smime -sign -in Elaborato.pdf.msg -out Elaborato.pdf.p7m -certfile ca.pem -certfile nomegruppo.crt -inkey nomegruppo.key -signer nomegruppo.crt Verify with openssl smime -verify -in Elaborato.pdf.p7m -out Elaborato-verified.msg -CAfile ca.pem -signer nomegruppo.crt Extract attachment with munpack Elaborato-verified.msg View with Acrobat Reader The problem is that even if I get a file that (from its binary content) resembles a PDF file my current Ubuntu PDF viewer doesn't read it. The XXXElaborato.pdf extracted by munpack is a little bit smaller than the original. What's the problem with this procedure? In theory, they should send me the signed S/MIME message and I should be able to read the PDF within it. Why can't I restore the original content of the PDF file?

    Read the article

  • Send all traffic over VPN connection not working Windows VPN host

    - by Adam Schiavone
    I am trying to get a mac (10.8) to connect to thru vpn to a server running Windows Server 2008 R2 pass all requests from the mac to the server. The VPN is setup and I can connect and access the server thru a web browser, but for all other sites, the DNS lookup fails. I have tried adding a DNS server to the VPN Host. ex. Lets say the the VPN server also hosts a website example.com. I connect to the VPN with my mac and point a browser to example.com and everything works fine. but when I point the browser to google.com it just sits there and will eventually come back with a DNS lookup failed message. HOWEVER: I tried running the command dig @myServersIpHere www.google.com. on the mac and it comes back with correct IP addresses. I really dont know what to do from here. How can I route all requests from my mac, thru my windows server via VPN?

    Read the article

  • SATA 3 PCIe Controller working with decreased performance (slower than SATA 2)

    - by V M
    After reading this question about maxing out an SSD I decided to do so myself. My mobo only supports SATA 2 and has two PCIe 2.0 x1 connectors (which promiss up to 500 mb/s). So after some searching I decided to go with this controller from amazon. My Samsung magician benchmark before upgrade (running SATA 2): Now after installing the controller all of the benchmark scores are lower (even though the Samsung Magician app confirms its connected to a SATA 3 port): What can I do to remedy this? Any help is appreciated.

    Read the article

  • jQuery and CodeIgniter AJAX with JSON not working

    - by thedp
    Hello, I trying to make my first AJAX with JSON call using jQuery and CodeIgniter. But for some weird reason it's not working. The jQuery code: var item = "COOL!"; $.post("http://192.168.8.138/index.php/main/test", { "item" : item }, function(data){ alert(data.result); }, "json"); The CodeIgniter code: <?php class main extends Controller { function test() { $item = trim($this->input->post('item')); $array = array('result' => $item); echo json_encode($array); } } ?> I tried to access the http://192.168.8.138/index.php/main/test page manually and it seems to be working, I got: {"result":""} I also tried to use Firebug to see XMLHttpRequest but saw nothing. I have no idea what am I doing wrong... Need help really badly. Thank you.

    Read the article

  • Commit all folders and files in a directory using commandline

    - by Shaharyar
    Hello everybody We are having trouble with having a generalized approach to committing with a batch file using commandline svn. We've got a backupscript that created a new folder with the current date containing the database dumps of our database. (Yes, we version control our database). Now how can I use the svn commit command to include all directories that are new in the project? Is there an approach without using the svn add command?` Thanks for all advice!

    Read the article

  • Gvim on Windows 7: ALT codes not working

    - by John Sonderson
    I would like to be able to enter ALT codes in Gvim on Windows 7 as documented on the following site: Alt Codes On Windows (Windows 7 in my case), to generate a character via an ALT code you make sure that the NumLock key on your keypad is toggled on, hold down the ALT key, enter the keycode on the numeric keypad, and then release the ALT key. However this does not work in Gvim on Windows (which ignores the fact that I am pressing the ALT key and just prints to entered keypad key directly onto the screen). How can I get these keystroke combinations to work in Gvim as well? Thanks. EDIT: As the answer below points out, the way to insert non-ASCII characters for which you do not have entries on your keyboard without changing the keyboard layout is as follows: Make sure you are in insert mode, and then type CTRL-V followed by the Unicode character code of interest, for instance: CTRL-V u00E0 (generates à) CTRL-V u00C8 (generates È) CTRL-V u00E8 (generates è) CTRL-V u00E9 (generates é) CTRL-V u00EC (generates ì) CTRL-V u00F2 (generates ò) etc... See for instance http://unicode-table.com/ for a full list of Unicode character codes. The following list of Unicode characters by language may also be useful: http://en.wikipedia.org/wiki/List_of_Unicode_characters In some cases such as this one, though, there might be an easier way to enter special characters (see :help digraphs and :digraphs). For example, while in insert mode you may be able to type the following: CTRL-K E! (yields É) CTRL-K a' (yields á) Note that as the following page shows: http://code.google.com/p/vim/source/browse/runtime/doc/digraph.txt Gvim 7.4 contains an even wider set of default digraphs than Gvim 7.3, thus providing convenience to an even broader set of languages. Regards.

    Read the article

  • Internet Working, Browsing Not.

    - by jeffreypriebe
    I have a very odd problem that I can't resolve. I am connected to the internet, but my browsing doesn't work. I don't mean a web browser - I mean browsing. Firefox, Chrome, Curl all fail to successfully connect to an HTTP address. However existing connections, e.g. to mail in Outlook (Exchange Server and also IMAP server) continue to work. Also, the internet is on, I can confirm both from my machine (other ports / connections) as well as from any other computer connected to the same network. Additionally, it appears to be HTTP, not simple a port issue as HTTP over port 8443 (Tortoise SVN if you must know - running over HTTP not over SVN) also fails. I am using Windows Vista SP2 (build 6002). It seems to "creep up" in that after running the computer for a few hours it will fail. (No found way to systematically reproduce the problem.) Additionally, it seems to be more prone on days where the internet connection is flaky already (not sure why the internet is flaky, just is, lot's of failed browsing requests and have to retry/reload often). What I have tried (when the problem arises) - none have yielded any resolution: Resetting the network connection (dis-connect, re-connect) Disable/re-enable the network adapter Double-checked the ip settings Double-checked the HOSTS file. Note: DNS continues to work (both new and cached responses to DNS queries). (Thanks for the suggestion Daniel and antenore.) Checked the routing tables (ip4 only as ipv6 is beyond my understanding) resetting all involved hardware (routers and modems) Close and reopen browsers Looked for malware interference: Run HijackThis Looked for suspicious processes using SysInternals procexp. Looked for explorer hijacks, lsa provider interference, winsock provider interference using SysInternals Autoruns. Run a complete anti-virus scan. Reviewed the output of a netstat -onab to see if there were stuck ports open or unusual processes running somewhere The only thing that works is to do a full reboot. That works 100% of the time to restore browsing. What else can I try to nail down the problem?

    Read the article

  • APC File Cache not working but user cache is fine

    - by danishgoel
    I have just got a VPS (with cPanel/WHM) to test what gains i could get in my application with using apc file cache AND user cache. So firstly I got the PHP 5.3 compiled in as a DSO (apache module). Then installed APC via PECL through SSH. (First I tried with WHM Module installer, it also had the same problem, so I tried it via ssh) All seemed fine and phpinfo showed apc loaded and enabled. Then I checked with apc.php. All seemed OK But as I started testing my php application, the stats in apc for File Cache Information state: Cached Files 0 ( 0.0 Bytes) Hits 1 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Which meant no PHP files were being cached, even though I had browsed through over 10 PHP files having multiple includes. So there must have been some Cached Files. But the user cache is functioning fine. User Cache Information Cached Variables 0 ( 0.0 Bytes) Hits 1000 Misses 1000 Request Rate (hits, misses) 0.84 cache requests/second Hit Rate 0.42 cache requests/second Miss Rate 0.42 cache requests/second Insert Rate 0.84 cache requests/second Cache full count 0 Its actually from an APC caching test script which tries to retrieve and store 1000 entries and gives me the times. A sort of simple benchmark. Can anyone help me here. Even though apc.cache_by_default = 1, no php files are being cached. This is my apc config Runtime Settings apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 1M apc.mmap_file_mask apc.num_files_hint 1000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 32M apc.slam_defense 1 apc.stat 1 apc.stat_ctime 0 apc.ttl 0 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock 1 Also most php files are under 20KB, thus, apc.max_file_size = 1M is not the cause. I have also tried using 'apc_compile_file ' to force some files into opcode cache with no luck. I have also re-installed APC with Debugging enabled, but nothing shows in the error_log I have also tried setting mmap_file_mask to /dev/zero and /tmp/apc.xxxxxx, i have also set /tmp permissions to 777 to no avail Any clue anyone. Update: I have tried following things and none cause APC file cache to populate 1. set apc.enable_cli = 1 AND run a script from cli 2. Set apc.max_file_size = 5M (just in case) 3. switched php handler from dso to FastCGI in WHM (then switched it back to dso as it did not solve the problem) 4. Even tried restarting the container

    Read the article

  • Targus USB-to-RS232 not working with Linux?

    - by Ethan Leroy
    I have the Targus PA088 USB to RS232 converter, but it seems that it does not work with linux. Its RX and TX lights are flashing, but I can't see the data in minicom/picocom. When using it with Windows and hterm, everything's fine. Any idea what could be the problem? Additional info: When I plug in the adapter, I can see the following messages in /var/log/messages.log Nov 25 01:47:31 localhost kernel: [ 831.787066] usb 2-1.1: new full speed USB device number 5 using ehci_hcd Nov 25 01:47:32 localhost kernel: [ 832.554810] mct_u232 2-1.1:1.0: MCT U232 converter detected Nov 25 01:47:32 localhost kernel: [ 832.555002] usb 2-1.1: MCT U232 converter now attached to ttyUSB0 Nov 25 01:47:32 localhost mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1" Nov 25 01:47:32 localhost mtp-probe: bus: 2, device: 5 was not an MTP device

    Read the article

  • Working examples of winform/WPF apps

    - by melody
    I'm a user interface designer. The project I'm working on is a dashboard that will have several interactive and customizable widgets (think Netvibes, etc.). The development group is going to be using either WinForm or WPF to build the dashboard and widgets. I need to understand the capabilities of each technology better and see a sampling of actual working apps to help accomplish this. I can't download and build examples... need live examples somewhere on the web. Can you point me to live, existing apps? Thx.

    Read the article

  • How to get syntax highlighting working in TextMate 2

    - by enewe101
    I just cloned TextMate 2 from GitHub. Followed the instructions in the readme file and everything went smooth with the installation. However, there is no syntax highlighting. No problem – just need themes, right? I found a theme I liked, downloaded and installed. Everything seemed to go fine. However, quitting and restarting TextMate 2 doesn't give me my theme in the menu I see. View Theme No Themes Loaded What?

    Read the article

  • Working local and upload on save in Eclipse with Aptana

    - by Saif Bechan
    Currently I am working in Dreamweaver for my web project. The way I work is open local files, and when I save the files are uploaded via FTP to my server. This works great because I have the same files local and on the server, and I don't have to move the files around a lot. Is this possible in eclipse with Aptana? I have tried working with RSE(remote system explorer), but then I only work with the remote files. I have also tried the normal Aptana FTP features, but there is no 'save on upload' feature. Does anyone have some recommendations for me?

    Read the article

  • Flash not working in Safari on OS X 10.5

    - by bhuga
    About 2 weeks ago my browsers started bothering me to upgrade flash. Eventually, I did, and now I have no flash at all in Safari. I downloaded and installed the newest flash installer from Adobe. Firefox works fine. Safari does not, I just get the blue lego and a 'No handler for this content type' message. Other plugins, such as 1Password, seem fine. I have tried: Reinstalling flash umpteen times Deleting /Library/Internet Plug-Ins/Flash Player.plugin and flashplayer.xpt Deleting ~/Library/Application Data/Safari I'm not sure what else to do.

    Read the article

  • OpenWRT + OpenVPN client forwarding from lan to vpn not working

    - by Dariusz Górecki
    I've OpenWRT router with Backfire 10.03.1-rc3 (arch:brcm 2.6 kernel) I've set up an OpenVPN client connecting my router with workplace lan, and it works nicely, I can connect from router to networks (several) in workplace. My OpenVPN client uci-config looks like: config 'openvpn' 'stream_client' option 'nobind' '1' option 'float' '1' option 'client' '1' option 'reneg_sec' '0' option 'management' '127.0.0.1 31194' option 'explicit_exit_notify' '1' option 'verb' '3' option 'persist_tun' '1' option 'persist_key' '1' list 'remote' 'remote.address.cutted' option 'ca' '/lib/uci/upload/cbid.openvpn.stream_client.ca' option 'key' '/lib/uci/upload/cbid.openvpn.stream_client.key' option 'cert' '/lib/uci/upload/cbid.openvpn.stream_client.cert' option 'enable' '1' option 'dev' 'tun1' I've set the 'STREAM_VPN' Zone to allow in/out traffic, and I've added rules for zone-to-zone lan<-vpn and vpn<-lan config 'zone' option 'name' 'stream_vpn' option 'network' 'stream_vpn' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'forwarding' option 'src' 'lan' option 'dest' 'stream_vpn' config 'forwarding' option 'src' 'stream_vpn' option 'dest' 'lan' And interface config: config 'interface' 'stream_vpn' option 'proto' 'none' option 'ifname' 'tun1' option 'defaultroute' '0' option 'peerdns' '0' Now, from my router everything works nicely, the problem is that I cannot connect from computer inside a lan to hosts in networks provided by vpn connection :/ What I've missed, or what I'm doing wrong? And how can I force using specified DNS when connected to vpn? (I know that sever should use PUSH DNS option, but is PUSHes only routes)

    Read the article

  • Get OWA and ActiveSync working on server using HTTP redirect in IIS 7

    - by eric
    We have two servers on our LAN. One is a Windows 2003 Server domain controller running Exchange 2003. The other is a stand-alone Windows 2008 server running IIS 7. Our company website runs on the IIS 7 (2008) server, so the firewall forwards port 80 to this. How can I get OWA and ActiveSync to work with this setup? And without using SSL. I have tried setting up a website on the IIS 7 box (mail.ourdomain.com) and using HTTP redirect to point to http://mailserver/exchange, but this doesn't work. Do we have to purchase an SSL certificate for this to work?

    Read the article

  • wget is working only when used with sudo

    - by Yusuf
    I'm having quite a strange behavior with wget since yesterday. I can download files by using sudo wget, but when I try the same file with only wget, I can get this error: yusufh@ubuntu-yuh:~$ wget http://www.kegel.com/wine/winetricks --2010-12-17 09:34:11-- http://www.kegel.com/wine/winetricks Resolving www.kegel.com... failed: Name or service not known. wget: unable to resolve host address `www.kegel.com' and with sudo wget: yusufh@ubuntu-yuh:~$ sudo wget http://www.kegel.com/wine/winetricks --2010-12-17 09:35:37-- http://www.kegel.com/wine/winetricks Connecting to 127.0.0.1:5865... connected. Proxy request sent, awaiting response... 200 OK Length: 190672 (186K) [text/plain] Saving to: `winetricks' 100%[==================================================================================================>] 190,672 --.-K/s in 0.03s 2010-12-17 09:35:37 (6.92 MB/s) - `winetricks' saved [190672/190672] After the comments below, here is an update: I can use Google Chrome or Firefox perfectly without running it as root. I use ntlmaps to connect to the office proxy. So I need to use 127.0.0.1:5865 as the proxy for clients. Result for env | grep -i proxy: NO_PROXY=localhost,127.0.0.0/8,*.local, http_proxy=127.0.0.1:5865 ftp_proxy=127.0.0.1:5865 all_proxy=socks://127.0.0.1:5865/ ALL_PROXY=socks://127.0.0.1:5865/ https_proxy=127.0.0.1:5865 no_proxy=localhost,127.0.0.0/8,*.local while sudo env | grep -i proxy is empty! HELP!

    Read the article

  • Can't get Ubuntu 11.10 working on my VirtualBox running on Mac OsX 10.6.8

    - by stack-o-frankie
    I installed the Guest Additions, installed the isight-firmware-tools by using the AppleUSBVideoSupport file but I still can't get access to the iSight webcam. When I launch vlc v4l2:///dev/video0 I get the following errors: Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS") Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE") [0x92d492c] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. Blocked: call to setlocale(6, "") Blocked: call to setlocale(6, "") (process:2922): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (vlc:2922): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (vlc:2922): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (vlc:2922): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (vlc:2922): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", [0x963287c] v4l2 demux error: VIDIOC_STREAMON failed [0x963287c] v4l2 demux error: cannot set input (Device or resource busy) [0x96430a4] v4l2 access error: VIDIOC_STREAMON failed [0x96430a4] v4l2 access error: cannot set input (Device or resource busy) [0x9371104] main input error: open of `v4l2:///dev/video0' failed: (null) Any clue?

    Read the article

  • Belking Wireless Router unable to connect to internet although wireless connection is working

    - by ptamzz
    I have a Belkin Basic N150 Wireless router. I'm trying to set up wireless connection using the wired ports my university has provided in my hostel room. Usually, when I connect my laptop using a LAN wire through the port, my settings are like IP: 10.5.130.X Subnet Mask: 255.255.254.0 Default Gateway: 10.5.130.250 DNS Server: 10.200.1.11 and I'm able to connect to the internet. Now instead of connecting my laptop directly, I've connected the lan wire to the Belkin Wireless Router, set the router as "Use as an Access Point" and in the IP field, I've put up 10.5.130.1. Now I've set the IP of my system manually to 10.5.130.3. I'm able to connect to the wi-fi but I'm still not able to connect to the internet. What am I missing?

    Read the article

  • HISTCONTROL=ignoreboth not working debian lenny

    - by Mike
    Can anybody confirm if by setting the the following env variables under debian lenny will make previous history entries not to be saved. GNU bash, version 3.2.39(1)-release export HISTCONTROL=ignoreboth export HISTSIZE=500 I have added them to my /etc/bash.bashrc but I keep getting repeated commands. Thanks

    Read the article

  • Excel 'recently used list' not showing on start menu, but working within excel

    - by Margaret Thorpe
    In windows 7 when you pin Excel 2007 to the start menu, it usually has a small arrow which shows your recently opened documents. Mine only shows permanently pinned documents. It used to work until I tried Office 2010 and then uninstalled it. If I open Excel and click on the file menu, I can see all the recently opened documents so they are being recorded somewhere... Any idea on how to restore it so I can view them on the start menu - Which I always used before?

    Read the article

  • Rsyslog is not working properly, it does not log anything

    - by Victor Henriquez
    I'm running a Debian server and a couple of days ago my rsyslog started to behave very weird, the daemon is running but it doesn't seem to do anything. Many people use the system but I'm the only one with (legal) root access. I'm using the default rsyslogd configuration (if you think is relevant I'll attach it, but it's the one that comes with the package). After I rotated all the log files, they have remained empty: # ls -l /var/log/*.log -rw-r--r-- 1 root root 0 Jun 27 00:25 /var/log/alternatives.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/auth.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/daemon.log -rw-r--r-- 1 root root 0 Jun 27 00:25 /var/log/dpkg.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/kern.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/lpr.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/mail.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/user.log Any try to force a log writing does not have any effect: # logger hey # ls -l /var/log/messages -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/messages Lsof shows that rsyslogd does not have any log files opened: # lsof -p 1855 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME rsyslogd 1855 root cwd DIR 202,0 4096 2 / rsyslogd 1855 root rtd DIR 202,0 4096 2 / rsyslogd 1855 root txt REG 202,0 342076 21649 /usr/sbin/rsyslogd rsyslogd 1855 root mem REG 202,0 38556 32153 /lib/i386-linux-gnu/i686/cmov/libnss_nis-2.13.so rsyslogd 1855 root mem REG 202,0 79728 32165 /lib/i386-linux-gnu/i686/cmov/libnsl-2.13.so rsyslogd 1855 root mem REG 202,0 26456 32163 /lib/i386-linux-gnu/i686/cmov/libnss_compat-2.13.so rsyslogd 1855 root mem REG 202,0 297500 1061058 /usr/lib/rsyslog/imuxsock.so rsyslogd 1855 root mem REG 202,0 42628 32170 /lib/i386-linux-gnu/i686/cmov/libnss_files-2.13.so rsyslogd 1855 root mem REG 202,0 22784 1061106 /usr/lib/rsyslog/imklog.so rsyslogd 1855 root mem REG 202,0 1401000 32169 /lib/i386-linux-gnu/i686/cmov/libc-2.13.so rsyslogd 1855 root mem REG 202,0 30684 32175 /lib/i386-linux-gnu/i686/cmov/librt-2.13.so rsyslogd 1855 root mem REG 202,0 9844 32157 /lib/i386-linux-gnu/i686/cmov/libdl-2.13.so rsyslogd 1855 root mem REG 202,0 117009 32154 /lib/i386-linux-gnu/i686/cmov/libpthread-2.13.so rsyslogd 1855 root mem REG 202,0 79980 17746 /usr/lib/libz.so.1.2.3.4 rsyslogd 1855 root mem REG 202,0 18836 1061094 /usr/lib/rsyslog/lmnet.so rsyslogd 1855 root mem REG 202,0 117960 31845 /lib/i386-linux-gnu/ld-2.13.so rsyslogd 1855 root 0u unix 0xebe8e800 0t0 640 /dev/log rsyslogd 1855 root 3u FIFO 0,5 0t0 2474 /dev/xconsole rsyslogd 1855 root 4u unix 0xebe8e400 0t0 645 /var/spool/postfix/dev/log rsyslogd 1855 root 5r REG 0,3 0 4026532176 /proc/kmsg I was so frustrated that even reinstall the rsyslog package, but it still refuses to log anything: # apt-get remove --purge rsyslog # apt-get install rsyslog I thought someone had hacked the system, so run rkhunter, chkrootkit, unhide in an attempt to find hide processes / ports and nmap in a remote host to compare with the ports shown by netstat. And I know this doesn't mean anything, but all looks ok. The system also have an iptables firewall that is very restrictive with incoming / outgoing connections. This is driving me crazy, any idea what is going on here? [EDIT - disk space info] # df -h Filesystem Size Used Avail Use% Mounted on rootfs 24G 22G 629M 98% / /dev/root 24G 22G 629M 98% / devtmpfs 10M 112K 9.9M 2% /dev tmpfs 76M 48K 76M 1% /run tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 151M 40K 151M 1% /tmp tmpfs 151M 0 151M 0% /run/shm

    Read the article

  • Recursive FTP directory listing in shell/bash with a single session (using cURL or ftp)

    - by Timo
    I am writing a little shellscript that needs to go through all folders and files on an ftp server (recursively). So far everything works fine using cURL - but it's pretty slow, becuase cURL starts a new session for every command. So for 500 directories, cURL preforms 500 logins. Does anybody know, whether I can stay logged in using cURL (this would be my favourite solution) or how I can use ftp with only one session in a shell script? I know how to execute a set of ftp commands and retrieve the response, but for the recursive listing, it has to be a little more dynamic... Thanks for your help!

    Read the article

  • WinPE, Startnet.CMD and passing variables to second batch file not working

    - by user140892
    I don't know scripting or PowerShell (yes I need to learn something). I'm not an expert batch file maker either. I have a WinPE flash drive which I used to deploy OS images. I have the WIM, drivers and anything needed else outside the WinPE environment to ensure that Updates, changes are easier for me to make. I use the "STARTNET.CMD" batch file which is part of the WinPE. The reason to go through the letter drives is that the WinPE always gets the X letter drive assigned. The flash drive itself can receive a random letter which always changes. My deployment menu is located on the flash drive it self and not inside the WinPE. This is so that if I need to make a change I don't have to re-do the WinPE. I am able to locate the "menu.bat" batch file and launch it. I use a variable to capture the letter drive. I call the second batch file named "menu.bat" and pass the variable to it. When the second batch file loads, I believe that I am calling the variable correctly. If I break out of the batch file I can echo the variable and see the expected reply. The issue is that I can't use the variable to work with anything on the second batch file. In my test, I can get this to work over and over. When it runs from the real USB flash drive it does not work. I removed comments from the second batch file to make it smaller. My issue is that files below all get a message stating that the system cannot find the path specified. Diskpart Imagex.exe bcdboot.exe Why can't I get the varible to properly function when I try to using example "ImageX.exe"? Contents of the Startnet.cmd @echo off for %%p in (a b c d e f g h i j k l m n o p q r s t u v w x y z) do if exist %%p:\Tools\ set w=%%p Set execpatch=%w%\Tools\ call %w%:\Menu.bat \Tools\ Contents of the Menu.BAT @echo off set SecondPath=%1 cls :Start cls Echo. Echo.============================================================== Echo. Windows 7 64 Bit Ent Basic Desktops Echo.============================================================== Echo. Echo A. 790 Windows 7 - Basic Echo. Echo. Echo I. Exit Echo. Echo. set /p choice=Choose your option = if not '%choice%'=='' set choice=%choice:~0,1% if '%choice%'=='a' goto 790_Windows_7_Basic echo "%choice%" is not a valid (answer/command) echo. goto start :790_Windows_7_Basic REM DISKPART /s %SecondPath%BatchFiles\Make-Partition.txt %SecondPath%imagex.exe /apply %SecondPath%Images\Win7-64b-Ent-Basic-SysPreped.wim 1 o:\ /verify %SecondPath%bcdboot.exe o:\Windows /s S: Copy %SecondPath%Unattended\unattend.XML o:\Windows\System32\sysprep\unattend.XML /y xcopy %SecondPath%Drivers\790\*.* o:\Windows\INF\790\ /E /Q /Y MD o:\Windows\Setup\Scripts\ Copy %SecondPath%BatchFiles\SetupComplete.cmd o:\Windows\Setup\Scripts\ /y Goto Done :Done Exit

    Read the article

  • EnterpriseLibrary.Logging directory ..

    - by MüllerDK
    Hi, I'm using MS EnterpriseLibrary.Logging and that works perfectly. But the logfile(s) are placed in where the program file are located. How do I get it to place my logfiles in individual users applicationData folder?? The folder I'm talking about is the one you get by calling "Environment.GetFolderPath(Environment.SpecialFolder.ApplicationData)". Any help appreciated :-) Best Regards Søren

    Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >