Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 199/421 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >

• Fastest router for OpenWRT/etc?

  - by marienbad

  I realize OpenWRT Wiki hardware info tells CPU model and MHz for many routers, but MHz doesn't directly map to speed. So... as far as you know, what are some of the fastest OpenWRT-compatible wifi routers out there?

  Read the article

• pfsense multi-site VPN VOIP deployment

  - by sysconfig

  have main office pfsense firewall configured like this: local networks WAN - internet LAN - local network VOIP - IP phones need to connect remote offices (multi-users) and single remote users (from home) use IPSEC or OpenVPN to build "permanent" automatically connecting tunnels from remote location to main location. in remote locations, network will look like this: WAN - internet LAN - local network multiple users VOIP - multiple IP phones in order for the IP phones to work they have to be able to "see" the VOIP network and the VOIP server back at the main office for single remote users ( like from home ) the setup will be similar but only one phone and one computer so questions: best way to tie networks together? IPSEC or OpenVPN can this be setup to automatically connect ? any issues/suggestions with that design/topology ? QoS or issues with running the VOIP traffic over a VPN throughput, quality etc.. obviously depends on remote locations connection to some degree

  Read the article

• OpenVPN on Android TCP retransmissions after OpenVPN server reboot

  - by anogaki

  I raised OpenVPN on server for the first time. It worked fine until the server rebooted. The firewall configuration is unchanged. When I tcpdump from tun interface on the server, I always get TCP retransmissions on all TCP packets larger than a few bytes in Android. Using a similar(read: same) configuration on my Linux box from where I'm posting this message now works just fine; no retransmissions, no loss. It did work just fine before the server rebooted. What could possibly cause this? I already tried rebooting Android, it didn't help. Client configuration, used on both Linux PC and Android tablet: dev tun client remote 192.168.0.1 persist-key persist-tun nobind pkcs12 user.p12 mssfix 1480 cipher AES-256-CBC verb 3 1480 is below the mtu of uplink connection on server which is 1492. I tried adding tun-mtu 1480 to Android but that didn't help either.

  Read the article

• How much time do I have to remove a domain controller that was lost using metadata cleanup?

  - by dasko

  I am wondering how long after a Domain Controller has been permanently lost, from the domain due to it dying from hardware perspective, do I have before I have to clean up references of it using meta data cleanup? Planning on doing it soon but not sure if there is anything I should be concerned about. This dead or lost domain controller had no roles other than being a Domain Controller and having integrated Active Directory DNS. As well it held NO FSMO roles, it was just an older replication Domain Controller.

  Read the article

• Can not connect to telnet server

  - by BloodPhilia

  So, I can't use telnet to connect to any server but it works fine from a different computer. It just says it can't connect. I tried the following things: Disable firewall and AV protection. (Basically, there was no security feature left online) Telnet is set to "Trusted" in my AV protection. (Kaspersky Internet Security 2011) Using Putty to telnet, but apparently Putty's connection is also inhibited. (Says it can't connect to host) Disabling the telnet client in Control Panel and then re-enabling it. (Windows 7 Ultimate) hosts file is clean. Checked for nasties using MBAM and KIS 2011 as well as going though my HijackThis logs, nothing found. I can connect to the same machines/servers through the web browser, ping, tracert, etc. Only telnet seems to be blocked. Any other thoughts?

  Read the article

• Display Driver stopped responding and recovered successfully- Blue Screen - HP Elite Book

  - by Fahad Saleem

  I have HP ELiteBook , this problem has become a routine headache for me (after every 20, 25 minutes_ - While using, suddenly everything hangs and black out goes around and then a message pop at the task bar below that display driver stopped ...and successfully recovered but the hangs and black screen continues and then the Blue Death Screen comes" and then i have no other option but to restart Is this a driver problem ? Hardware problem ? what should I do Please be specific , no stories and theories

  Read the article

• Why isn't Synergy working for me?

  - by Anthony

  It worked for about a week then stopped working. I'm trying to make it work between a Windows 7 laptop and a Windows XP laptop. My router is a Linksys E1000. I tried uninstalling and reinstalling the program multiple times. I've tried port forwarding. I've tried making exceptions in the firewall. I've tried disabling the firewalls. It might be relevant also that Input Director doesn't work either. What am I doing wrong?

  Read the article

• IPFW not locking people out

  - by Cole

  I've had some brute-forcing of my ssh connection recently, so I got fail2ban to hopefully prevent that. I set it up, and started testing it out by giving wrong passwords on my computer. (I have physical access to the server if I need to unblock myself) However, it never stops me from entering passwords. I see in /var/log/fail2ban.log that fail2ban kicked in and banned me, and there's a ipfw entry for my IP, but I'm not locked out. I've changed the configuration around, and then tried just using the ipfw command myself, but nothing seems to lock me out. I've tried the following blocks: 65300 deny tcp from 10.0.1.30 to any in 65400 deny ip from 10.0.1.30 to any 65500 deny tcp from 10.0.1.30 to any My firewall setup has a "allow ip from any to any" rule after these though, maybe that's the problem? I'm using Mac OS 10.6 (stock ipfw, it doesn't seem to have a --version flag) Thanks in advance.

  Read the article

• Two cursor keys not working on iBook G4

  - by Charles Stewart

  The left and right cursor keys on my iBook G4 running Macos 10.4 do not respond. Since this holds for both Aqua and X11, I am inclined to think that this is a hardware problem. Are there any other checks I should do before seeking out the repair guy?

  Read the article

• Front audio jack not working or missconfigured?

  - by Nicholas

  I have win xp and asus p5ql-e motherboard. The problem is that when i plug in my headphones on the front audio jack, the computer doesn't recognizes it. They work on the back audio jack but not on the front - how can i be sure that it;s not a software problem (something miss configured or not configured at all), before i conclude that it's a hardware problem (broken front audio jack or miss connected to the motherboard)?

  Read the article

• UDP flooding multiple servers

  - by Chris Gurney

  What do you suggest? Being UDP flooded as I write to multiple servers in different data centers in 5 different countries . Up to 250,000 packets a second. I believe Cisco routers 5505 would not handle that - (some of our datacenter hosters can offer them. Some have no firewalls to offer.) Our clients naturally have constant disconnects to the server they are on. Hacker started this about three weeks ago. Sometimes for a few hours - up to a few days. If we can't stop it hitting the server with firewalls then how do we stop the hacker - now there is the challenge! Update : Found some of the data centers offer up to 10 firewall rules but would their routers be able to handle the possible volume I am talking about? Thanks Chris

  Read the article

• Pfsense: Inbound Load Balancing https with sticky connection

  - by Zeux

  first of all I'm very sorry for my English... This is my scenario: Internet Firewall+LB: pfsense_1(Active) + pfsense_2(Passive) in CARP Pool servers: 3 x nginx(PHP5+HTTP+HTTPS) Pfsense 1 and 2 CARP configured with Virtual IP (pubblic). Nginx servers's ips are all private. I want to load balance inbound HTTP and HTTPS connections between the 3 nginx web servers. An importat thing is that the HTTPS connections must be "sticky connections": in HTTPS connections, after login by username and password, I setup a php session and therefore when a client starts a HTTPS connection it will be always redirected to the same nginx server, until it disconnects itself, it closes the page/browser or after a timeout (30minutes?) without activity. Is this possible whit the last release(2.0.1) of pfsense? thank you very much...

  Read the article

• IIS FTP Server works locally, but cannot connect from remote

  - by Mike Christensen

  I'm trying to setup an FTP server on Windows 2008 Server. I can connect locally: C:\>ftp localhost Connected to WebHead1 220 Microsoft FTP Service However, when I try to connect from remote, it doesn't work: ~>ftp x.x.x.x ftp: Can't connect to `x.x.x.x': Operation timed out ftp: Can't connect to `x.x.x.x' I've tried everything I can think of with the settings. The FTP server is bound to all unassigned IPs and listening on port 21. I've also checked "FTP Server" in the firewall settings. Nothing appears in the FTP log files. I'm totally out of ideas!

  Read the article

• Cyrus IMAP: Unable to connect to remote host: Connection refused

  - by Nick

  I'm working on setting up a Cyrus 2.2 IMAP server on Ubuntu Server 9.04. If I telnet from the server itself: # telnet localhost imap I get: * OK IMAP Cyrus IMAP4 v2.2.13-Debian-2.2.13-14ubuntu3 server ready Which is what I should be seeing. If I try from another machine on the network: telnet 192.168.5.122 imap I get: telnet: Unable to connect to remote host: Connection refused To the best of my knowledge, there is no firewall running on the box. I've tried restarting the saslauthd and cyrus2.2 daemons, with no effect. What else can I try?

  Read the article

• AWS VPN Tunnel going down without traffic

  - by Asfura

  I managed to setup a site-to-site VPN connection from Amazon VPC to a company's network, and after a lot of configuration it was working fine, but now i realized that the VPN tunnel is DOWN every time there's no traffic going trough for a couple minutes. The only way that i have found to generate traffic is to reach the amazon instance from the company's network and then the tunnel goes up again. I had a cronjob doing ping every minute, but i think it should have a keepalive option somewhere, or at least a log file of the tunnels to find out what's going on. Any ideas to keep the tunnel up and/or bring it up from amazon? The firewall is a Checkpoint R75.20, it only allows one tunnel at a time for the same subnet, so i cant have both tunnels active. Thank you, any questions just ask. EDIT I forgot to add, the ping keepalive was working great (maybe generating a bit of traffic, but nothing to worry about), the connection dropped because i had to restart the instance, and it that little time it dropped me.

  Read the article

• How do I setup an FTP server on Windows 7?

  - by Matt Frear

  I'm having trouble getting an FTP server setup on Windows 7. I've added the service using Control Panel - Programs - Turn Windows features on and off. I can see the service has started in Control Panel - Services. But then when I fire up a Windows command-line window, cmd, I get Not connected., C:\Users\mattf>ftp localhost ftp> ls Not connected. ftp> open localhost ftp> ls Not connected. ftp> dir Not connected. ftp> quit C:\Users\mattf> And that's as far as I've got. I have no idea why this isn't working - could it be firewall settings?

  Read the article

• Persistent Issues on small business network using Cisco 871W and Catalyst Express 500

  - by Ben Campbell

  Being the most qualified (read: still not qualified) to solve our persistant network issues, I've turned to serverfault for guidance. I've done some searching, reading related documentation on cisco.com and tried a bit of troubleshooting. Here is the config: 100mb synchronous connection from a business internet provider (tested multiple times at 100meg at the source) Cisco 871W wireless point & router is where the WAN connection starts (this serves all our wireless). The only wired connection in the 871W is the Catalyst switch listed below. Cisco Catalyst Express 500 (24TT) is where all the wired connections terminate. About 20 Windows workstations and servers (AD/Webservers only). Some services in EC2 including mail and other web servers/apps. I've been TOLD cabling internally should be gigabit-ready. Here are the problems: generally slow download rates from the internet to the desktop/laptop frequent "page cannot be displayed" errors in browsers-sometimes 3 or 4 reloads are necessary... often times CSS wont load or other content requiring the browser to connect to a different server. slow speed within the LAN from workstation to workstation copying files. I would expect extremely fast data transfer workstation to workstation / server to workstation in this simple network. Several things I need to admit: I'm not primarily a network guy. Funding is relatively low, I need to be the guy that finds the solution. I understand most of the terminology and most of the technology. Implementation is where I fail due to lack of experience. Getting to the point: I'm wondering whether experienced network admins think that our small network should be sufficiently served with our current hardware if configured properly... or if we should purchase new equipment and start fresh? If starting fresh is the plan, whatever that new equipment may be is a likely different question entirely. If I haven't provided enough information, I will happily do some troubleshooting and update with the results. I have experience using wireshark and some other tools. Please let me know what you think would be most helpful and thanks in advance. EDIT: I forgot to add that the Cisco applicance will not finish loading the SDM Express console. It hangs every time at the "populating modules... DHCP". It eventually crashes and closes. I've rebooted the hardware and this still happens.

  Read the article

• Can connect to Samba server but cannot access shares?

  - by jlego

  I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. Needs to be able to share files with a PC running Windows 7 and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error 0x80070035 " Windows cannot access \SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error "The original item for ShareName cannot be found." When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? UPDATE 2: As the directory I am trying to share is actually an entire internal disk, I have tried to things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. UPDATE 3: Not sure exactly what I did, but now whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Any suggestions? UPDATE 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. UPDATE 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally) UPDATE 6: Figured it out. See answer below

  Read the article

• Static IPv6 address advertising and IPv6 autoconfig in Debian/Ubuntu

  - by Pascal

  I have a network that advertises IPv6 addresses through IPv6 autoconfig. To allow DNS lookups and to have fancy IP addresses, we setup "static" IPv6 addresses through /etc/network/interfaces: auto eth0 iface eth0 inet dhcp iface eth0 inet6 static address a:b:c:d:e::f netmask 64 Whenever we now connect through IPv6 Linux uses the IPv6 autoconfig address: a:b:c:d:21d:60ff:fe4a:479 and not the static IPv6 address: a:b:c:d:e::f A server on the other side only sees the autoconfig address. Is there a way to force linux (Debian/Ubuntu) to use the static address for outgoing packets? This is especially interesting for reverse DNS and firewall settings. I don't want to disable the IPv6 autoconfig since I don't have control over the settings the router advertises.

  Read the article

• Wamp virtualhost with supporting of remote access

  - by Farid

  To cut the long story short, I've setup a Wamp server with local virtual host for domain like sample.dev, now I've bind my static IP and port 80 to my Apache and asked the client to make some changes in his hosts file and add x.x.x.x sample.dev , I've also configured my httpd virtual host like this : <VirtualHost *:80> ServerAlias sample.dev DocumentRoot 'webroot_directory' </VirtualHost> Client can reach to my web server using the direct access by ip address, but when he tries using the sample domain looks like he gets in to some infinite loop. The firewall is off too. What would be the problem?! Thanks.

  Read the article

• Setting up a wireless access point with Ubuntu server

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server, everything "seems" to be good since I got a better wifi radio (long story). But now I am a little confused, when my Android phone tries to associate with the AP it is able to with no problem but then it cannot get an IP address from my DHCP server. I have tried messing with firewall rules, nothing... I tried making a bridge interface as per what I am told I had to do. ( Not sure if i did it right though). What I am trying to do if make the wireless interface an extention of my eth0 network. Am I on the right track or am I going about the wrong way?

  Read the article

• Is post-sudden-power-loss filesystem corruption on an SSD drive's ext3 partition "expected behavior"?

  - by Jeremy Friesner

  My company makes an embedded Debian Linux device that boots from an ext3 partition on an internal SSD drive. Because the device is an embedded "black box", it is usually shut down the rude way, by simply cutting power to the device via an external switch. This is normally okay, as ext3's journalling keeps things in order, so other than the occasional loss of part of a log file, things keep chugging along fine. However, we've recently seen a number of units where after a number of hard-power-cycles the ext3 partition starts to develop structural issues -- in particular, we run e2fsck on the ext3 partition and it finds a number of issues like those shown in the output listing at the bottom of this Question. Running e2fsck until it stops reporting errors (or reformatting the partition) clears the issues. My question is... what are the implications of seeing problems like this on an ext3/SSD system that has been subjected to lots of sudden/unexpected shutdowns? My feeling is that this might be a sign of a software or hardware problem in our system, since my understanding is that (barring a bug or hardware problem) ext3's journalling feature is supposed to prevent these sorts of filesystem-integrity errors. (Note: I understand that user-data is not journalled and so munged/missing/truncated user-files can happen; I'm specifically talking here about filesystem-metadata errors like those shown below) My co-worker, on the other hand, says that this is known/expected behavior because SSD controllers sometimes re-order write commands and that can cause the ext3 journal to get confused. In particular, he believes that even given normally functioning hardware and bug-free software, the ext3 journal only makes filesystem corruption less likely, not impossible, so we should not be surprised to see problems like this from time to time. Which of us is right? Embedded-PC-failsafe:~# ls Embedded-PC-failsafe:~# umount /mnt/unionfs Embedded-PC-failsafe:~# e2fsck /dev/sda3 e2fsck 1.41.3 (12-Oct-2008) embeddedrootwrite contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Invalid inode number for '.' in directory inode 46948. Fix<y>? yes Directory inode 46948, block 0, offset 12: directory corrupted Salvage<y>? yes Entry 'status_2012-11-26_14h13m41.csv' in /var/log/status_logs (46956) has deleted/unused inode 47075. Clear<y>? yes Entry 'status_2012-11-26_10h42m58.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47076. Clear<y>? yes Entry 'status_2012-11-26_11h29m41.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47080. Clear<y>? yes Entry 'status_2012-11-26_11h42m13.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47081. Clear<y>? yes Entry 'status_2012-11-26_12h07m17.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47083. Clear<y>? yes Entry 'status_2012-11-26_12h14m53.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47085. Clear<y>? yes Entry 'status_2012-11-26_15h06m49.csv' in /var/log/status_logs (46956) has deleted/unused inode 47088. Clear<y>? yes Entry 'status_2012-11-20_14h50m09.csv' in /var/log/status_logs (46956) has deleted/unused inode 47073. Clear<y>? yes Entry 'status_2012-11-20_14h55m32.csv' in /var/log/status_logs (46956) has deleted/unused inode 47074. Clear<y>? yes Entry 'status_2012-11-26_11h04m36.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47078. Clear<y>? yes Entry 'status_2012-11-26_11h54m45.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47082. Clear<y>? yes Entry 'status_2012-11-26_12h12m20.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47084. Clear<y>? yes Entry 'status_2012-11-26_12h33m52.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47086. Clear<y>? yes Entry 'status_2012-11-26_10h51m59.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47077. Clear<y>? yes Entry 'status_2012-11-26_11h17m09.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47079. Clear<y>? yes Entry 'status_2012-11-26_12h54m11.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47087. Clear<y>? yes Pass 3: Checking directory connectivity '..' in /etc/network/run (46948) is <The NULL inode> (0), should be /etc/network (46953). Fix<y>? yes Couldn't fix parent of inode 46948: Couldn't find parent directory entry Pass 4: Checking reference counts Unattached inode 46945 Connect to /lost+found<y>? yes Inode 46945 ref count is 2, should be 1. Fix<y>? yes Inode 46953 ref count is 5, should be 4. Fix<y>? yes Pass 5: Checking group summary information Block bitmap differences: -(208264--208266) -(210062--210068) -(211343--211491) -(213241--213250) -(213344--213393) -213397 -(213457--213463) -(213516--213521) -(213628--213655) -(213683--213688) -(213709--213728) -(215265--215300) -(215346--215365) -(221541--221551) -(221696--221704) -227517 Fix<y>? yes Free blocks count wrong for group #6 (17247, counted=17611). Fix<y>? yes Free blocks count wrong (161691, counted=162055). Fix<y>? yes Inode bitmap differences: +(47089--47090) +47093 +47095 +(47097--47099) +(47101--47104) -(47219--47220) -47222 -47224 -47228 -47231 -(47347--47348) -47350 -47352 -47356 -47359 -(47457--47488) -47985 -47996 -(47999--48000) -48017 -(48027--48028) -(48030--48032) -48049 -(48059--48060) -(48062--48064) -48081 -(48091--48092) -(48094--48096) Fix<y>? yes Free inodes count wrong for group #6 (7608, counted=7624). Fix<y>? yes Free inodes count wrong (61919, counted=61935). Fix<y>? yes embeddedrootwrite: ***** FILE SYSTEM WAS MODIFIED ***** embeddedrootwrite: ********** WARNING: Filesystem still has errors ********** embeddedrootwrite: 657/62592 files (24.4% non-contiguous), 87882/249937 blocks Embedded-PC-failsafe:~# Embedded-PC-failsafe:~# e2fsck /dev/sda3 e2fsck 1.41.3 (12-Oct-2008) embeddedrootwrite contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Directory entry for '.' in ... (46948) is big. Split<y>? yes Missing '..' in directory inode 46948. Fix<y>? yes Setting filetype for entry '..' in ... (46948) to 2. Pass 3: Checking directory connectivity '..' in /etc/network/run (46948) is <The NULL inode> (0), should be /etc/network (46953). Fix<y>? yes Pass 4: Checking reference counts Inode 2 ref count is 12, should be 13. Fix<y>? yes Pass 5: Checking group summary information embeddedrootwrite: ***** FILE SYSTEM WAS MODIFIED ***** embeddedrootwrite: 657/62592 files (24.4% non-contiguous), 87882/249937 blocks Embedded-PC-failsafe:~# Embedded-PC-failsafe:~# e2fsck /dev/sda3 e2fsck 1.41.3 (12-Oct-2008) embeddedrootwrite: clean, 657/62592 files, 87882/249937 blocks

  Read the article

• Replication in PG 9 between Windows and Linux boxes

  - by mlaverd

  I have PostgreSQL 9 running on Windows 2003 SP2. I am trying to replicate it on a Fedora 12 system running PostgreSQL 9 as well. I am hitting this error message: /usr/pgsql-9.0/bin/postgres -D /var/lib/pgsql/9.0/data/ -p 5432 2011-02-11 17:43:26 ISTFATAL: incorrect checksum in control file Because of firewall restrictions, I could not follow the official instructions to the letter. Instead, I zipped the contents of the data directory when the server was offline and copied that to the Linux box. I ran a sha1deep on both directories and there were no mismatches. I changed the rights so that only the postgres user and group had access to the files. Now, what can I do for replication to work? I tried with a 'pg_dumpall', but the system complains that the database IDs do no match.

  Read the article

• Windows 2008R2 blocks outbound LDAP for non-admins?

  - by Jon Bailey

  I've got a Windows 2008R2 terminal server with ~30 users on it. It's joined to a Samba-based domain. During the login script, we connect directly to the LDAP server to pull out certain profile information. This used to work just fine. Now, it doesn't, but only for non-local-admin accounts. Local admins work fine. As a non-local-admin: Connection to ports 389 or 636 just terminate (wireshark on the LDAP server reveals no connection attempt) Connection to other ports on the same server work fine Same thing on multiple LDAP servers Windows firewall is disabled Can't find any other rules/policies that may block this I suspect since this used to work, it came down during an update, but for the life of me, I can't find what. EDIT: I just ran Wireshark on the machine and didn't see anything when connecting to the LDAP server in question (or any LDAP server for that matter). I can, however, see traffic when I connect to that server on another port.

  Read the article

• pfsense multi-site VPN VOIP deployment

  - by sysconfig

  have main office pfsense firewall configured like this: local networks WAN - internet LAN - local network VOIP - IP phones need to connect remote offices (multi-users) and single remote users (from home) use IPSEC or OpenVPN to build "permanent" automatically connecting tunnels from remote location to main location. in remote locations, network will look like this: WAN - internet LAN - local network multiple users VOIP - multiple IP phones in order for the IP phones to work they have to be able to "see" the VOIP network and the VOIP server back at the main office for single remote users ( like from home ) the setup will be similar but only one phone and one computer so questions: best way to tie networks together? IPSEC or OpenVPN can this be setup to automatically connect ? any issues/suggestions with that design/topology ? QoS or issues with running the VOIP traffic over a VPN throughput, quality etc.. obviously depends on remote locations connection to some degree

  Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >