Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 203/421 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

  • Linux clients and Windows Servers can connect but not windows clients

    - by Mustafa Ismail Mustafa
    This is driving me insane because I can't make head or tails of it. We have two DCs (W2K3 SP1) and I'v tried this once on each machine as a sanity check. DHCP is being served by either one of the machines and all machines get an address no problem. The servers can connect/ping/browse to the www and so can all our linux clients. But NONE of our windows clients (all windows 7). I can do anything within the network, I can even ping the firewall/router but nothing from the windows clients is leaving the confines of our subnet. I don't get it. The linux and windows clients are both served from the same DHCP server, the gateway is the same, everything is the same. Anyone care to take a shot at how to resolve this? I tried adding explicit routes at the clients, but still no go. TIA SMIM

    Read the article

  • monitor network bandwidth via ssh

    - by ServerSideX
    I'm running a Centos 6.4 server with cPanel. WHM (admin side panel) shows about 100GB of bandwidth this month. However, the server's RTG shows 3.4TB last 30 days, 121GB past 24 hours alone. Doesn't make sense. I'm trying to trace the cause of this. It's a shared web hosting server for approximately 300 domains. I would appreciate help tracing this down somehow. I utilize CSF firewall and Configserver exploit scanner as well. Day http://s10.postimg.org/ti1qhj5mx/day.png Week http://s7.postimg.org/8ho8kds57/week.png

    Read the article

  • http, https and ftp is not working but smtp and imap is working

    - by Unicron
    hi all, yesterday on a computer of a friend a strange thing happened. after booting the ports fo http, https and ftp are closed but e-mail is still working. in the control panel the windows firewall seems active even if he tries to deactivate it. i have a suspision that it is the faul of norton internet security 2010, we have tried to uninstall it, but the uninstallation did not work. when using the removal tool from symantec it just goes to 23% and then it crashes. the process ccSvcHst.exe is still running. how can i safeley remove the rest of norton internet security? thanks in advance [edit] norton internet security 2010 is sucesfully removed, but still no connectivity

    Read the article

  • How much should a Systems Administrator be making?

    - by Curtis
    Hello, I'm a Sys Admin for a small (but successful and growing) company (~60 employees). I've got roughly 5-6 years of actual sys admin experience, plus another 5+ years of lower level work in the industry. I'm responsible for most everything above a helpdesk level in the company (server[windows]/network[cisco]/firewall/SAN[emc] setup/configuration/maintenance/troubleshooting), lead many projects, analyze system data -- I'm sure you've heard it all before...I have a bunch of certs, most are just "nice to have", but the ones that actually apply to my role are CCNA, MSCE, VCP (VMware). If things go wrong, I'm first in line to resolve the issue. I'm not management (no one reports to me). I've seen many of these sorts of questions online before, and I know the typical response is "too many variables, depends on location, industry type" etc etc. I'm just wondering (ballpark) what I should be looking for. I've tried to give as much detail as I can, but if I'm missing something, I'd be glad to post it. Thanks anyone.

    Read the article

  • Windows 8 - When AC Power is disconnected, atibtmon.exe throws a Runtime error

    - by Junior Mayhé
    The installer is not working for my ATI mobility Radeon HD 3670 on Dell XPS Studio 16 using Windows 8 PRO 64 bits. Here are the screenshots of my ATI Radeon configuration: Hardware configuration Software configuration And here is the problem on Windows 8: everytime I disconnect the AC power cord, atibtmon.exe throws a runtime error as follows What could I do to avoid this error? I have installed the legacy driver http://support.amd.com/us/kbarticles/Pages/catalystlegacywin8.aspx but this installer fails (when trying to install the driver).

    Read the article

  • How do I resolve active directory connection errors when using dcpromo?

    - by Middletone
    When attempting to promote a secondary server to an existing active directory forest I receive the following error message and can no longer continue. Failed to examine the active directory forest. Value ridMasterDSA.partentDN not found What can cause this and what can be done to fix it? Both servers are 2008 running on x64 and can see each other on the network via their names. FYI: The firewall is turned off on both machines so there should be no issue there. Also the server that i'm adding is already a part of the domain. One server is already a domain controller but I want to add a second to it.

    Read the article

  • Dropbox won't connect on Ubuntu 10.10 (Waiting For Connection)

    - by slhck
    I run Ubuntu 10.10 (2.6.35-25) on an x86 machine and try to install Dropbox by downloading the latest .deb file from the website. Now, first it will install dropbox-nautilus (requiring me to restart Nautilus before that) and then ask me to start Dropbox itself. The Dropbox client opens and indefinitely waits for a connection as there is a connection error. Of course, I don't use a proxy server and I'm writing this post from this very machine, so there's no problem with the internet connection. I'm not using a firewall (at least not that I know of, the Ubuntu installation is relatively untouched so far). Does anybody have some pointers?

    Read the article

  • Apple Magic Mouse on Windows XP SP3

    - by index
    Using generic Windows bluetooth drivers + Apple Wireless Mouse drivers as Bluetooth HID service. The mouse is connected. It just does not do anything. It does not show up under mice in hardware manager, just as Bluetooth HID. Not using the Apple drivers does not work either. I'm using a logilink BT0007

    Read the article

  • Creating virtual switch in VMware

    - by MJI
    We are trying to add a network using vsphere client for VMkernel port while creating a virtual switch. But it prompts us a red cross between the physical adapter and VMkernel port. We did test all the network cables and the network adapters. We tried creating virtual switch for service console but no gains. We have used NIC's which are VMware certified. I have even tried to update bios to check the hardware compatibility but didn't work.

    Read the article

  • DHCP server with multiple interfaces on ubuntu, destroys default gateway

    - by Henrik Kjus Alstad
    I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

    Read the article

  • Bandwidth Control on our Internet Connection

    - by AlamedaDad
    Hi all, I have Covad dual/bonded T1 service in our office coming through a Cisco 1841 and then through a Sonicwall 3060Pro/Enhanced SW firewall. The problem I'm looking for some input on is how to limit the amount of bandwidth any single user/PC can user for downloading a file from the Internet. It's become an issue that when one person happens to download let's say an ~300MB file, normal internet access for the other employees slows to a crawl. I've seen through MRTG that in fact usage of the circuit jumps to the full 3mb for the duration of the download and then drops. Is it possible to control this? I'm not familiar with QOS or the like so I'm not sure. Any help on this would be appreciated. Thanks...Michael

    Read the article

  • How to upload stuff to Amazon EC2 Windows instance?

    - by JohnIdol
    I've never used Amazon EC2 - I am thinking to test a few instances for running intensive computation processes I have a requirement for rather than buying real hardware. I am given to understand the thing is quite easy to setup - but I have no clue of how it actually works, in terms of transferring data to my ec2 instances. So the question is how can I upload stuff to my instance? Any help appreciated!

    Read the article

  • Is using Windows Update to find Drivers for laptop good enough?

    - by user22105
    I'm trying to install drivers for my laptop after fresh install of Windows 8. From the manufacturer's website, there are many drivers and utilities available. But after running Windows Update(which finds drivers for the hardware on my laptop), I only had to install a few (the ones with Unidentified Device) I'm wondering if this is good enough? or would I skip some important drivers like Chipset Thermo management etc etc that could potentially cause harm to my laptop?

    Read the article

  • Managing Active Directory Group Membership with a Non-Administrator Account In Server 2008

    - by Laranostz
    I am running Server 2008 R2 in an Active Directory Domain Environment. I have created a group in Active Directory and I have delegated management authority to that group to a user. I want this user to be able to add and remove accounts as needed from that group so that they are exercising some measurement of control without giving them other authority. When I have the user attempt to access the Active Directory Users & Computers Console it prompts them for Administrator credentials. They are using Remote Desktop to access the server, because they do not have Windows 7, and firewall rules prevent using the Remote Management Kit. I do not want to provide them with any level of Administrative rights except the minimum required for them to add/remove users from this group. There are two servers that 'talk' to each other in this isolated environment, a domain controller and a member server, both are only reachable through RDP. Any suggestions?

    Read the article

  • network endpoint accessible via hostname only, not address?

    - by Dustin Getz
    someone told me that this piece of network hardware (NAS) has a security setting such that it can only be accessed by hostname, not by IP address. I don't understand, as I thought DNS resolved the hostname to an address on the connecting client's side, then at protocol level always used the raw address, so how can this 'security' measure be possible?

    Read the article

  • Server Core remote management from Windows 7 machine

    - by Robert Koritnik
    I've installed Remote Server Administration Tools for Windows 7 because I would like to administer my Windows Server 2008 R2 Server Core machine. The problem that I'm getting when I try to run Server Manager is: Connecting to remote server failed with the following error message: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. This is what I've done so far: I'm running WinRM service on both machines (Server and Window 7) I've added my server to trusted hosts on my Windows 7 machine: winrm set winrm/config/client @{TrustedHosts="WINSRV2"} I've added registry entry on Windows 7 machine: reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v LocalAccountTokenFilterPolicy /t REG_DWORD /d 1 /f I've enabled Remote Management inbound rule on server firewall using CoreConfigurator 2.0 both machines are in the same subnet and when I search for network machines on Windows 7 I see my server. Question What else should I do to make it work? I would like to run several different remote management tools against my server machine.

    Read the article

  • CentOS 5.7 keeps rebooting after fresh installation

    - by Wagner Maestrelli
    I have just installed CentOS 5.7 x86_64 on a new computer. The installation went on without any issues. But, after it finnished, the machine started to show an awkward behaviour: it restarts every time it tries to boot. It happens after all the services have been started. The screen just goes black and it shows an error message from the monitor: Input not supported. And then it reboots. I took a look at the logs, but I couldn't manage to find anything. Any help? Update Before doing the hardware diagnosis, as pointed out, I decided to make some tests. First, I changed the runlevel to 3, adding the 3 parameter at the end of the kernel command. Then, after logging in in text mode, I checked the xorg.conf file out for some problems regarding the screen resolution. There was nothing unexpected set. Well, if there had to be a problem with it, I couldn't start the X server at the command line, right? So, I typed startx and Gnome started! So, probably, it's not an issue with the screen resolution, I suppose. Then I selected the Log Out root... Gnome menu option and something odd happened: the screen went black, the Input not supported monitor error message was displayed and the system rebooted. Yes, the same problem I was having while trying to boot! After that, I decided to try yet another test: I removed the rhgb quiet parameters from the kernel command to see if some error would show up. Well, to my surprise, the boot went on without problems! The Gnome login screen showed up, I logged in and the session started. But then I selected the Shut Down... menu option and guess what? Same problem: black screen, same monitor error and the system rebooted. Yes, it rebooted, it did not shut down. I repeated both of the tests and the behaviours were the same. I really don't know what's going on. It seems to be an issue regarding the changing of the screen mode or something like that. Any ideas? Could this be a hardware problem? Or does it seem to be something regarding the system configuration?

    Read the article

  • IIS FTP service - download timeouts and restarts getting the data twice

    - by accel229
    We have an IIS FTP site on a Windows Server 2003 x64 machine. Application Layer Gateway service is disabled (so http://support.microsoft.com/kb/931130 does not apply). Windows Firewall service is disabled as well. Connection timeout for the FTP site (there is only one) is set to 1,200 seconds = 20 minutes. An external client can connect to the site, list directory contents and download small files. When a client attempts to download a large file (eg, if the download continues for 3 minutes, which is still under 20 minutes, but relatively long), the server sends all data, then the connection times out, the client issues REST / RETR commands attempting to restart the download since after the last byte (which I believe should succeed and receive exactly 0 bytes), and the server behaves as if the client tried to restart after byte 0, that is, it sends the entire file all over. Any ideas on how to fix this?

    Read the article

  • Can't rdp into new ( or old ) Azure VM

    - by Raif
    I have an Azure account with a VM on it. I haven't used it in about 8 months. I tried to connect today but it wont take my creds. Now I'm not entirely sure that I have my password correct, pretty sure but not entirely. So I created a new VM and set the password. Clicked the Connect button on the portal window, tried to connect and was rejected using the password I know to be correct. I have disabled my local machine firewall and antivirus.

    Read the article

  • Ubuntu Server 10.04 Heavy Network Traffic causes disconnect

    - by K Vaughan
    I'm currently running a headless Ubuntu 10.04 server. Installed is the LAMP stack, Joomla, Virtualbox, phpvirtualbox, webmin and proFTP.. It resolves the IP address so I can access it remotely (either the apache2 webserver or the FTP) using DDClient. Any packages installed have been installed using apt-get. Webmin, although discouraged in Ubuntu Server, is used mostly to administer the webserver aspect. This issue also appeared when I was using Ubuntu Server 10.10. After periods of heavy network traffic, whether local or remote, the connect drops. I'm talking specifically about the transfer of files via FTP, SCP or Samba (the latter of which I seldom use). There is no response to ping or ssh. I can't FTP to the server nor can I load the website. There are times when the server has been on for a few days and everything runs fine because I haven't accessed it much, if at all (thus not much network traffic). I've gone through a few hardware changes although I don't believe this has cause the issue: this has been happening long before I made any changes. At first I thought it was my ISP-provided router blocking traffic because of some kind of misconfiguration (perhaps assuming it was some kind of DoS attack). I've changed routers and still found no success. I've checked syslog, dmesg and kern.log for warnings but have uncovered none. I've ran memtest via the GRUB2 menu at boot and once it turned up 4 errors. I ran again with individual sticks of RAM in various slots and everything turned up fine. I've looked through the BIOS settings and everything looks fine. I've tried unplugging unnecessary pieces of hardware (other internal hard drives, CD drives, floppy, PCI cards, etc). Any help or tips on how I can even begin to troubleshoot this would be very much appreciated. Please note that i've only started playing with servers as a hobby so my knowledge wouldn't be the most refined. I'm comfortable with command line and have the initiative to know how to look up something I can't do. Unfortunately I can't seem to find any issues like this. Additionally: If a solution can't be found some assistance to write a script that will cause the server to reboot automatically if, after x minutes, it gets no response to pinging somewhere like google. Admittedly that's not the cleanest solution should my internet end up going down but I can't think of what else to do.

    Read the article

  • Reverse proxy setup for distributed storage

    - by vise
    I have 4 file servers that I want to access under a single mount point from another server. This server has a web application that should serve content from the mounted point. I think I can achieve this with glusterfs. Considering that the file servers have fairly powerful hardware, I want to install a webserver on each of them and serve those files via a reverse proxy. Any thoughts on how I may be able to do so?

    Read the article

  • Cant logon to domain over site-to-site vpn

    - by 3molo
    Tied together branch office with main office over two Cisco ASAs. The (internal) networks on either side can communicate with the other. I can ping, use the DC's DNS service and even join a domain on a new client. I can't however logon, I get the "domain controller is not available" error message on client. I find nothing peculiar in DC's event logs. Sicne it's site-to-site (with ping), it's always up so it should work. No firewall rules (except allow any any) between the two networks (of either side). Main site internal net: 10.10.10.0/24 Branch office net: 10.180.3.0/24 Am I overlooking something here? Where should I start investigating this?d

    Read the article

  • How to remove iso 9660 from USB?

    - by a_m0d
    I have somehow managed to write an iso 9660 image onto my USB drive, which makes all my computer think that the device is actually a CD. I have tried various methods of removing this partition, but nothing seems to work. I have tried fdisk, which says $ fdisk -l /dev/sdb Cannot open /dev/sdb parted crashes when I try to use it on this device. I have even tried $ dd if=/dev/zero of=/dev/sdb but it just hangs with no output (either on screen or on disk). However, when I plug the USB in, it does mount, and I can view (but not edit) the files on it. edit: now the result is $ dd if=/dev/zero of=/dev/sdb dd: opening `/dev/sdb': Read-only file system I have also tried re-formatting it on Windows, but it gets to the end of the format process and then says "Couldn't format the drive". How can I remove this partition and get my whole USB drive back to normal again? EDIT 1: Trying a simple mkfs doesn't work: $ sudo mkfs -t vfat /dev/sdb mkfs.vfat 3.0.0 (28 Sep 2008) mkfs.vfat: Will not try to make filesystem on full-disk device '/dev/sdb' (use -I if wanted) I can't do mkfs on /dev/sdb1 because there is no such partition, as shown:$ ls /dev | grep sdb sdb EDIT 2: This is the information posted by dmesg when I plug the device in:$ dmesg . . (snip) . usb 2-1: New USB device found, idVendor=058f, idProduct=6387 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: Mass Storage usb 2-1: Manufacturer: Generic usb 2-1: SerialNumber: G0905000000000010885 usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access FLASH Drive AU_USB20 8.07 PQ: 0 ANSI: 2 sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: unknown partition table sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg2 type 0 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts CE: hpet increasing min_delta_ns to 15000 nsec This shows that the device is formatted as ISO 9660 and that it is /dev/sdb. EDIT 3: This is the message that I find at the bottom of dmesg after running cfdisk and writing a new partition table to the disk:SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts sd 17:0:0:0: [sdb] Device not ready: Sense Key : Not Ready [current] sd 17:0:0:0: [sdb] Device not ready: < ASC=0xff ASCQ=0xffASC=0xff < ASCQ=0xff end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 lost page write due to I/O error on sdb

    Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >