Search Results

Search found 14145 results on 566 pages for 'level of detail'.

Page 199/566 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >

• How to re-add RAID-10 dropped drive?

  - by thiesdiggity

  I have a problem that I can't seem to solve. We have a Ubuntu server setup with RAID-10 and two of the drives dropped out of the array. When I try to re-add them using the following command: mdadm --manage --re-add /dev/md2 /dev/sdc1 I get the following error message: mdadm: Cannot open /dev/sdc1: Device or resource busy When I do a "cat /proc/mdstat" I get the following: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [r$ md2 : active raid10 sdb1[0] sdd1[3] 1953519872 blocks 64K chunks 2 near-copies [4/2] [U__U] md1 : active raid1 sda2[0] sdc2[1] 468853696 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdc1[1] 19530688 blocks [2/2] [UU] unused devices: <none> When I run "/sbin/mdadm --detail /dev/md2" I get the following: /dev/md2: Version : 00.90 Creation Time : Mon Sep 5 23:41:13 2011 Raid Level : raid10 Array Size : 1953519872 (1863.02 GiB 2000.40 GB) Used Dev Size : 976759936 (931.51 GiB 1000.20 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Thu Oct 25 09:25:08 2012 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : c6d87d27:aeefcb2e:d4453e2e:0b7266cb Events : 0.6688691 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed 2 0 0 2 removed 3 8 49 3 active sync /dev/sdd1 Output of df -h is: Filesystem Size Used Avail Use% Mounted on /dev/md1 441G 2.0G 416G 1% / none 32G 236K 32G 1% /dev tmpfs 32G 0 32G 0% /dev/shm none 32G 112K 32G 1% /var/run none 32G 0 32G 0% /var/lock none 32G 0 32G 0% /lib/init/rw tmpfs 64G 215M 63G 1% /mnt/vmware none 441G 2.0G 416G 1% /var/lib/ureadahead/debugfs /dev/mapper/RAID10VG-RAID10LV 1.8T 139G 1.6T 8% /mnt/RAID10 When I do a "fdisk -l" I can see all the drives needed for the RAID-10. The RAID-10 is part of the /dev/mapper, could that be the reason why the device is coming back as busy? Anyone have any suggestions on what I can try to get the drives back into the array? Any help would be greatly appreciated. Thanks!

  Read the article

• Video on Hyperion Tax Provision

  - by Lia Nowodworska - Oracle

  ( in via Jan) EPM Information Development has asked us to remind you about the new video available for Hyperion Tax Provision. You can view it on the OracleEPMWebcasts YouTube channel here: http://bit.ly/1jxLlCy An information rich 4:40 minutes of your time.  So please take a look. The video gives a brief overview of the main features of  Hyperion Tax Provision. You will learn ... That Tax Provision and reporting System builds on the Hyperion Financial Close Reporting Platform That much of the Tax Provision flow process is similar to the Financial Close Process and that the modules have been aligned to work together very closely. That HTP enables you to integrate Book- and Tax Reporting on a common platform. That It uses the technology of HFM, ties in with SmartView and can be used with Hyperion Financial Reporting. That the native integration between the Financial System and the Tax System creates transparency for the Tax Departments and removes bottlenecks in the tax process. More technical information can be found here: Oracle Hyperion Tax Provision Data Sheet Oracle Hyperion Tax Provision White Paper Oracle Hyperion Tax Provision Documentation If you have another 45 minutes to spare and want to get into greater detail, then you can check out the recording of an Advisor Webcast that we did earlier last year: You can find this via KM Doc Oracle Business Analytics Advisor Webcast Schedule and Archive Recordings (Doc ID 1456233.1) -> Select the Tab "Archived 2013" and it is the third from the top: "Oracle Hyperion Tax Provision - Features and Overview with Demo" If you have questions towards that Advisor Webcast, you may participate in the Community Discussion about it. (layout and post: Torben, authorized: Lia)

  Read the article

• What is an appropriate language for expressing initial stages of algorithm refinement?

  - by hydroparadise

  First, this is not a homework assignment, but you can treat it as such ;). I found the following question in the published paper The Camel Has Two Humps. I was not a CS major going to college (I majored in MIS/Management), but I have a job where I find myself coding quite often. For a non-trivial programming problem, which one of the following is an appropriate language for expressing the initial stages of algorithm refinement? (a) A high-level programming language. (b) English. (c) Byte code. (d) The native machine code for the processor on which the program will run. (e) Structured English (pseudocode). What I do know is that you usually want to start your design implementation by writing down pseuducode and then moving/writing in the desired technology (because we all do that, right?) But I never thought about it in terms of refinement. I mean, if you were the original designer, then you might have access to the original pseudocode. But realisticly, when I have to maintain/refactor/refine somebody elses code, I just keep trucking with the language it currently resides in. Anybody have a definitive answer to this? As a side note, I did a quick scan of the paper as I havn't read every single detail. It presents various score statistics, can't find where the answers are with the paper.

  Read the article

• Are there any real-world cases for C++ without exceptions?

  - by Martin

  In When to use C over C++, and C++ over C? there is a statement wrt. to code size / C++ exceptions: Jerry answers (among other points): (...) it tends to be more difficult to produce truly tiny executables with C++. For really small systems, you're rarely writing a lot of code anyway, and the extra (...) to which I asked why that would be, to which Jerry responded: the main thing is that C++ includes exception handling, which (at least usually) adds some minimum to the executable size. Most compilers will let you disable exception handling, but when you do the result isn't quite C++ anymore. (...) which I do not really doubt on a technical real world level. Therefore I'm interested (purely out of curiosity) to hear from real world examples where a project chose C++ as a language and then chose to disable exceptions. (Not just merely "not use" exceptions in user code, but disable them in the compiler, so that you can't throw or catch exceptions.) Why does a project chose to do so (still using C++ and not C, but no exceptions) - what are/were the (technical) reasons? Addendum: For those wishing to elaborate on their answers, it would be nice to detail how the implications of no-exceptions are handled: STL collections (vector, ...) do not work properly (allocation failure cannot be reported) new can't throw Constructors cannot fail

  Read the article

• SEO - different data with same title and keywords

  - by Junaid Saeed

  here is my scenario i have a website where i redirect my users basing upon the device they were using, lets say a user is visiting from an iPad, i take him directly to the page of iPad wallpapers, the user selects iPad version & i take the user to the gallery of wallpapers where the user can select & download any wallpaper. Every wallpaper is the required resolution, i have my reasons for doing this, now the thing is there are diff. resolution. versions of an image appearing one 5 diff. sections of my website, each having their own view page Now there is only one record in db.table for the image, and basing on the my consistent naming convention of the images, i pick the required image. this means when 5 different pages are generated in 5 categorized sections of the website, due to a shared DB record, the keywords, the titles and every single detail of the 5 pages is same besides the resolution of the image, and the section specific details that the page has and yeah the pages also have different paths like wallpapers.com\ipad-1\cars\Ferrari-dino.html wallpapers.com\ipad-2\cars\Ferrari-dino.html wallpapers.com\ipad-3\cars\Ferrari-dino.html wallpapers.com\ipad-4\cars\Ferrari-dino.html wallpapers.com\ipad-5\cars\Ferrari-dino.html now this is my scenario, How do Search Engines see it and how do they rank it? Is it a Good or Normal or Bad SEO practice? If bad how dangerous it is for my sites SEO? i need your comments on my scenario.

  Read the article

• Stylecop 4.7.37.0 has been released

  - by TATWORTH

  Stylecop  4.7.37.0 has been released at http://stylecop.codeplex.com/releases/view/79972The release notes follow:Add docs for new SA1650 spelling rule.Fix for 7395. Dont remove parenthesis around await expressions.Insert a returns element into docs within a see element.Update our tools folder StyleCop dll'sfix for 7392. Insert generic type docs for return types correctly.Fix for 7393. Allow documentation elements with attributes to end the string and still be valid.Make sure the MSBuild Task logs the warning id and type of exception. Unless the description field holds all this info VS cannot show the text in the Error List.Load custom dictionaries for multiple cultures. For a culture like en-GB; we load CustomDictionary.xml, then look for CustomDictionary.en-GB.xml and then CustomDictionary.en.xmlUpdate standard shipping dictionaries.Element documentation spelling fixes.Reduce the standard dictionaryUpdate our own devbuild StyleCop checks.Don't check spelling of xml documentation attributes are anything inside  <c> or <code> elements.Update StylingStyling update.Add timestamps for all the dependant files into the StyleCopResults.cache. Add a FileSystemWatcher to all custom dictionary files.Write out the full violation into the StyleCopResults.cache.Change a rules description text.Styling fixes.Styling fixes.NEW RULE: Check Spelling Of Element Documetation. Fix over 2000 spelling errors in our source code. Update the VS addin to show the rule violation in more detail. Add spelling checker to the deployment.Set our own Culture to en-USDocumentation spelling fixes.First draft of the documentation spelling checker.Fix for 7325. Don't throw 1126 in goto statements.Fix for 7090. Add TargetsDir to registry during install.Fix for 7060. Sort usings after moving them inside namespace.Fix FxCop issues.Fix for 7389. Detect CpuCount on Unix/MACFix for 6788. Allow opening curly brackets for scope. Added new tests.Updating constants.Fix for 7167. Show version number of StyleCop in VS Help window.Only output StyleCop excluded files if there are any.

  Read the article

• Every file on cPanel got deleted (then restored hours later), and I have no idea why

  - by mcranston18

  I apologize in advance if I don't provide proper detail; I am new to server stuff and am looking for general advice about this issue: I was helping out a client doing web design last month. They have about a dozen static sites on one server. The sites are all built on Joomla, except one which I built on Wordpress. Everything was working fine last month when we did the redesign but all of a sudden this morning, every single file on their server got deleted: every web page, file, and all e-mail addresses. I phoned the hosting company (alliancewww.com) to ask, "why did every single file suddenly delete off the server?" They said, "because someone must have deleted it." I said, "well no one did." (Which I'm pretty damn sure no one did.) They said, "you can pay us to look into the problem." I authorized $150 for them to look into the problem. About an hour later, everything was magically re-instated. The host said they had a back-up of everything and just restored everything. What I'm wondering: Does anyone have recommendations of logs I can go through to investigate how the files got deleted in the first place? I've checked out their cPanel logs but found nothing. Is it likely that this is a mess-up on the host's part?

  Read the article

• What do you wish language designers paid attention to?

  - by Berin Loritsch

  The purpose of this question is not to assemble a laundry list of programming language features that you can't live without, or wish was in your main language of choice. The purpose of this question is to bring to light corners of languge design most language designers might not think about. So, instead of thinking about language feature X, think a little more philisophically. One of my biases, and perhaps it might be controversial, is that the softer side of engineering--the whys and what fors--are many times more important than the more concrete side. For example, Ruby was designed with a stated goal of improving developer happiness. While your opinions may be mixed on whether it delivered or not, the fact that was a goal means that some of the choices in language design were influenced by that philosophy. Please do not post: Syntax flame wars (I could care less whether you use whitespace [Python], keywords [Ruby], or curly braces [Java, C/C++, et. al.] to denote program blocks). That's just an implementation detail. "Any language that doesn't have feature X doesn't deserve to exist" type comments. There is at least one reason for all programming languages to exist--good or bad. Please do post: Philisophical ideas that language designers seem to miss. Technical concepts that seem to be poorly implemented more often than not. Please do provide an example of the pain it causes and if you have any ideas of how you would prefer it to function. Things you wish were in the platform's common library but seldom are. One the same token, things that usually are in a common library that you wish were not. Conceptual features such as built in test/assertion/contract/error handling support that you wish all programming languages would implement properly--and define properly. My hope is that this will be a fun and stimulating topic.

  Read the article

• Tips on how to notify a user of new features in your game

  - by brent777

  I have noticed a problem when releasing new features for a game that I wrote for Android and published on Google Play Store. Because my game is "stage-based" - and not a game like Hay Day, for example, where users will just go into the game every day since it can't really be finished - my users are not aware of new features that I release for the game. For example, if I publish a new version of my game and it contains a couple new stages, most of their devices will just auto-update the game and they don't even notice this and think to check out what's new. So this is why an approach like popping open a dialog that showcases the new feature(s) when they open the game for the first time after the update was done is not really sufficient. I am looking for some tips on an approach that will draw my users back into the game and then they could read more detail about new features on such a dialog. I was thinking of something like a notification that tells them to check out the new features after an update is done but I am not sure if this is a good idea. Any suggestions to help me solve this problem would be awesome.

  Read the article

• How should I describe the process of learning someone else's code? (In an invoicing situation.)

  - by MattyG

  I have a contract to upgrade some in-house software for a large company. The company has requested multiple feature additions and a few bug fixes. This is my first freelance style job. First, I needed to become familiar with how the application worked - I learnt it as if I was a user. Next, I had to learn how the software worked. I started with broad concepts, and then narrowed down into necessary detail before working on each bug fix and feature. At least at the start of the project, it took me a lot longer to learn the existing code than it did to write the additional features. How can I describe the process of learning the existing code on the invoice? (This part of the company usually does things in-house, so doesn't have much experience dealing with software contractors like me, and I fear they may not understand the overhead of learning someone else's code). I don't want to just tack the learning time onto the actual feature upgrade, because in some cases this would make a 'simple task' look like it took me way too long. I want break the invoice into relevant steps, and communicate that I'm charging for the large overhead of learning someone else's code before being able to add my own to it. Is there a standard way of describing this sort of activity when billing for a job?

  Read the article

• Pandaboard crash on startup or freeze after minutes

  - by Meach

  I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

  Read the article

• How important is Domain knowledge vs. Technical knowledge?

  - by Mayank

  I am working on a Trading and Risk Management application and although from a C# background, I have been asked to work on SSIS packages. Now I can live with that. The pain point is that there is too much emphasis on business understanding. Trading (Energy Trading to be exact) is a HUGE area and understanding every little bit of it is overwhelming. But for the past two months I have been working on understanding the business terms - Mark To Market, Risk Metrics, Positions, PnL, Greeks, Instruments, Book Structure... every little detail (you get the point). Now IMHO, this is the job of a BA. Sure it is very important for developers to understand the business but where do you draw the line? When I talked to my manager about this, he almost mocked me by saying that anybody can learn a technology in a week. It's the business that's harder. My long term aspiration is to remain on the technical side, probably become an architect (if possible). If I wanted to focus so much on business I would have pursued an MBA! I want to know if I am wrong or too naive in understanding the business importance or is my frustration justified?

  Read the article

• Turn Based Event Algorithm

  - by GamersIncoming

  I'm currently working on a small roguelike in XNA, which sees the player in a randomly generated series of dungeons fending off creeps, as you might expect. As with most roguelikes, the player makes a move, and then each of the creeps currently active on screen will make a move in turns, until all creeps have updated, and it return's to the player's go. On paper, the simple algorithm is straightforward: Player takes turn Turn Number increments For each active creep, update Position Once all active creeps have updated, allow player to take next turn However, when it comes to actually writing this in more detail, the concept becomes a bit more tricky for me. So my question comes as this: what is the best way to handle events taking turns to trigger, where the completion of each last event triggers the next, when dealing with a large number of creeps (probably stored as an array of an enemy object), and is there an easier way to create some kind of engine that just takes all objects that need updating and chains them together so their updates follow suit? I'm not asking for code, just algorithms and theory in the direction of objects triggering updates one after the other, in a turn based manner. Thanks in advance. Edited: Here's the code I currently have that is horrible :/ if (player.getTurnOver() && updateWait == 0) { if (creep[creepToUpdate].getActive()) { creep[creepToUpdate].moveObject(player, map1); updateWait = 10; } if (creepToUpdate < creep.Length -1) { creepToUpdate++; } else { creepToUpdate = 0; player.setTurnOver(false); } } if (updateWait > 0) { updateWait--; }

  Read the article

• Am I missing something about these considerations about Leaderboard's database's schema?

  - by misiMe

  I just finished to develop a mobile game, now I want to implement an online leaerboard using mysql. I'm wondering about the database's schema, I thought about some possibilities: (I didn't got in detail with syntax because my question is just about the logic of it) Name: string; Score: integer I thought to ask the name just the first time. If, in the future, you will modify that, it will call just an update to the name associated with your id. Leaderboard(ID, Name, Score) ID: integer autoincrement, PrimaryKey With this kind of idea maybe the db will grow fast because if you choose everytime a different name for the score, it will add a new entry. Leaderboard(PhoneId, Name, Score) Here PhoneId will be the unique identifier of the phone, PrimaryKey. A con of this choice is that if you want to play with your friends' phone, you can't put a different name for the score. Leaderboard(Name, Score) Here Name is PrimaryKey. With that, if you enter a name that already exists, you will be prompted to choose another one. Do you agree with this considerations? What will you do? Am I missing something?

  Read the article

• How do you setup Postfix/Dovecot/MySQL to not look for local accounts?

  - by thiesdiggity

  I am having an issue with one of my Postfix/Dovecot mail servers and I'm unsure how to fix the problem. I will try to explain it in detail, here it goes: I have an Ubuntu server setup using Virtual hosting with Postfix, Dovecot and MySQL. We have one domain setup as a virtual domain, for this example I am going to use mail.example.com. Under that domain we have one email address. I have another server (MS Exchange) setup using another one of my sub-domains, ex.example.com. The problem is that when I SMTP into the account on mail.example.com and try to send an email to an account on ex.example.com, I get the email returned back to us with an "unknown host" error. Now, I know that the mail.example.com server can resolve the ex.example.com domain because I can ping/dig while SSH'd into it. I can also log into Postfix via Telnet and send an email to an ex.example.com mailbox. I'm guessing that it has something to do with Postfix/Dovecot looking locally for the domain in the virtual domain list because of the tld domain (example.com)? If that's the case, how do I get Postfix/Dovecot to only look locally for the entire URL (mail.example.com) and if it doesn't find it, send it to the correct server by looking up the MX/A records (which I know exist and are setup correctly)? I have been working on this all day and any guidance would be GREATLY appreciated! Thanks for your time!

  Read the article

• What's so great about Clojure?

  - by marco-fiset

  I've been taking a look at Clojure lately and I stumbled upon this post on Stackoverflow that indicates some projects following best practices, and overall good Clojure code. I wanted to get my head around the language after reading some basic tutorials so I took a look at some "real-world" projects. After looking at ClojureScript and Compojure (two the the aforementioned "good" projects), I just feel like Clojure is a joke. I don't understand why someone would pick Clojure over say, Ruby or Python, two languages that I love and have such a clean syntax and are very easy to pick up whereas Clojure uses so much parenthesis and symbols everywhere that it ruins the readability for me. I think that Ruby and Python are beautiful, readable and elegant. They are easy to read even for someone who does not know the language inside out. However, Clojure is opaque to me and I feel like I must know every tiny detail about the language implementation in order to be able to understand any code. So please, enlighten me! What is so good about Clojure? What is the absolute minimum that I should know about the language in order to appreciate it?

  Read the article

• Discovery methods

  - by Owen Allen

  In Ops Center, asset discovery is a process in which the software determines what assets exist in your environment. You can't monitor an asset, or do anything to it through Ops Center, until it's discovered. I've seen a couple of questions about how to discover various types of asset, so I thought I'd explain the discovery methods and what they each do. Find Assets - This discovery method searches for service tags on all known networks. Service tags are small files on some hardware and operating systems that provide basic identification info. Once a service tag has been found, you provide credentials to manage the asset. This method can discover assets quickly, but only if the target assets have service tags. Add Assets with discovery profile - This method lets you specify targets by providing IP addresses, IP ranges, or hostnames, as well as the credentials needed to connect to and manage these assets. You can create discovery profiles for any type of asset. Declare asset - This method lets you specify the details of a server, with or without a configured service processor. You can then use Ops Center to install a new operating system or configure the SP. This method works well for new hardware. These methods are all discussed in more detail in the Asset Management chapter of the Feature Reference guide.

  Read the article

• PASS: Total Registrations

  - by Bill Graziano

  At the Summit you’ll see PASS announce the total attendance and the “total registrations”.  The total registrations is the sum of the conference attendees and the pre-conference registrations.  A single person can be counted three times (conference plus two pre-cons) in the total registration count. When I was doing marketing for the Summit this drove me nuts.  I couldn’t figure out why anyone would use total registrations.  However, when I tried to stop reporting this number I got lots of pushback.  Apparently this is how conferences compare themselves to each other.  Vendors, sponsors and Microsoft all wanted to know our total registration number.  I was even asked why we weren’t doing more “things” that people could register for so that our number would be even larger.  This drove me nuts. I understand that many of you are very detail oriented.  I just want to make sure you understand what numbers you’re seeing when we include them in the keynote at the Summit.

  Read the article

• Error: kernel headers not found. (But they are in place)

  - by Guandalino

  I'm trying to install the Guest Additions in VirtualBox 4.04. Host OS is Ubuntu desktop 11.04 64bit, guest OS is Ubuntu server 11.10 64bit. $ sudo ./VBoxLinuxAdditions.run After some output this line is printed: The headers for the current running kernel were not found. But the headers are installed, at least accordingly to dpkg: $ dpkg --get-selections | grep linux-headers linux-headers-3.0.0-12 install linux-headers-3.0.0-12-server install linux-headers-server install The running kernel is: $ uname -a Linux foobar 3.0.0-12-server #20-Ubuntu SMP Fri Oct 7 16:36:30 UTC 2011 x86_64 x86_64 X86_64 GNU/Linux How do I fix things so that Guest Additions installer is able to find kernel headers? Update: added full output. The headers for the current running kernel were not found. If the module compilation fails then this could be the reason. Building the main Guest Additions module ...done. Building the shared folder support module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) Installing the Window System drivers ...fails! (Could not find the X.Org or XFree86 Window System). I don't care for fail #2, because that's a server and I don't need X server. But I need shared folder support. Some further detail: $ tail /val/log/vboxadd-install.log .......... cc1: some warnings being treated as errors make[2]: *** [/tmp/vbox.0/vfsmod.o] Error 1 make[1]: *** [_module_/tmp/vbox.0] Error 2 make: *** [vboxsf] Error 2

  Read the article

• Why can't I boot from portable HD?

  - by user11239

  I've been trying to get Ubuntu 10.04-LTS 32-bit desktop installed onto a 250GB FreeAgent Go drive from Seagate. I've been able to install onto a USB flash drive and boot successfully from this. I have installed Ubuntu onto the jump drive using Universal USB Installer, and this was a total success in terms of getting Ubuntu to run off a flash drive. I was unable to accomplish this with the portable HDD. I then, following instructions, attempted to install the OS onto the HDD once booted up from the flash drive. After installing the OS on the HDD, the computer would simply not load the OS when the HDD medium was selected for booting from. However, as there is no System-> Preferences-> Removable Drives and Media I could not complete this step. Is this vital? How do I do this under Ubuntu 10.04? I have formmated the MBR on the HDD and repeated the above, still with no success. I have also browsed some forums that mention there may be something related to spin-up speeds, but nothing explained in detail the issue or how to solve it, and I'm not familiar enough with system booting to understand if this could be an issue. Basically, what I'm trying to do is get Ubuntu to boot off the HDD, I've attempted several things, and the result is, after selecting the HDD from BIOS, the OS never starts booting (after waiting upwards of ten minutes). I just have a white cursor blinking. I can always get it to boot from the jump drive. Related question

  Read the article

• Jet Brains release WebStorm 5.0

  - by TATWORTH

  At http://www.jetbrains.com/webstorm/whatsnew/index.html?WS50ROW, Jet Brains have announced the release of WebStorm 5.0, an IDE that brings the ease of code writing in VB.NET and C# that you get with ReSharper, to JavaScript, CSS and LESS. (There are some more details in http://blog.jetbrains.com/webide/2012/08/liveedit-plugin-features-in-detail/)Code completion in JavaScript, CSS and LESS is a very welcome feature. I look forward to trying out Web Storm. The download at http://www.jetbrains.com/webstorm/download/index.html comes with a free 30-day trial).Price information is at http://www.jetbrains.com/webstorm/buy/index.jsp - you should note that if you are an open-source developer, you can apply for a free license. The price of a personal license at £23 + VAT is a no-brainer. The price of a Commercial license would have been paid for in a few days of the increased productivity that this tool brings.Web Storm currently requires Google Chrome to run. Like ReSharper it appears to be a very able tool. It includes tools such as:XSLT debuggingJSLint for checking for JavaScript errorsJavaScript debuggingJavaScript unit testing (including code coverage)JavaScript folding regionsCoffeeScript supportWell I suggest that you try WebStorm 5.0

  Read the article

• Getting file system free space

  - by Fred Riley

  This isn't a problem as such, more a request for information based on ignorance of the Linux filesystem. The very short question is: How do I find out how much free and used space there is on the volume from which Ubuntu is running? More detail: I'm running Ubuntu 12.04 from a 64Gb USB3 stick, created from booting up a year-old Ubuntu 12.04 DVD and running Startup Disk Creator. The reason for this is that the Master Boot Record on my hard disk, holding Windoze 7, has gone belly-up, and whilst awaiting a recovery disk I'm running Ubunto off USB or DVD as a 'trial'. (And will continue to run Ubuntu after restoring Windoze, as I've rediscovered my love of the penguin :o)) After installing Ubuntu on the stick I ran the software update app, which downloaded some 450Mb of updates and took a couple of hours to install to the stick. A couple of times I got a message saying that disk space was short. So I looked in the file manager (or whatever it's called these days) and couldn't see the stick listed, just: SYSTEM hard disk (listed as 479Gb Filesystem) two other partitions that had been created by Windoze "4.3GB Filesystem" which when I try to open gives the error "Could not find /cow", and when I try to unmount it tells me I can't because it's not mounted - D'OH!! Edit: screenshot of file manager Edit: screenshot of low disk space warning What I can't see is the USB stick from which I'm running Ubuntu. Where's it gone, anybody know? This is tangentially related to a previous question of mine about system tools, in that I'm trying to get control and knowledge of the system in the newest incarnation of Ubuntu.

  Read the article

• Which things instantly ring alarm bells when looking at code? [closed]

  - by FinnNk

  I attended a software craftsmanship event a couple of weeks ago and one of the comments made was "I'm sure we all recognize bad code when we see it" and everyone nodded sagely without further discussion. This sort of thing always worries me as there's that truism that everyone thinks they're an above average driver. Although I think I can recognize bad code I'd love to learn more about what other people consider to be code smells as it's rarely discussed in detail on people's blogs and only in a handful of books. In particular I think it'd be interesting to hear about anything that's a code smell in one language but not another. I'll start off with an easy one: Code in source control that has a high proportion of commented out code - why is it there? was it meant to be deleted? is it a half finished piece of work? maybe it shouldn't have been commented out and was only done when someone was testing something out? Personally I find this sort of thing really annoying even if it's just the odd line here and there, but when you see large blocks interspersed with the rest of the code it's totally unacceptable. It's also usually an indication that the rest of the code is likely to be of dubious quality as well.

  Read the article

• Should CV contain cases where certain party fools me and not pay salary? Is it "holiday" time or not?

  - by otto

  Suppose I am fooled to work in a start-up or a company that has been a very small over a long time, let say 10 years. I work them 3 months and I really enjoy the work -- I learn a lot of new skills such as Haskell, MapReduce, CouchDB and many other little things. Now the firm did not pay any salary: A) I may be unskilled, B) I did not meet some deadline (I don't know because I am not allowed to speak to the boss but I know that I am not getting any payment) or C) I was fooled. Some detail about C I heard that the firm have had similar cases from my friend, "The guy X was there and he said he does not trust the firm at all so he went to other firm". I don't know what the term "trust" mean here, anyway the firm consists of ignorant drop-outs that hires academic people, a bit irony. They hire people from student-organizations and let them work and promise ok -compensation but -- when you start working the co-employer starts all kind of instructions "Do not work so hard, do not work so long, do not work so much" -- it is like he is making sure you do not feel sad when he does not pay any salary (co-employer is an owner in the firm). Anyway, I learnt a ton in the company but it was very inefficient working. I worked only alone, not really working in a "company". Now should by resume contain references to the firm and the guy who did not pay me anything? Or should my resume read that I worked in XYZ -technologies -- but 1 year's NDA -- what can write here? Now I fear that if I put the firm to my resume: they will lie about my input to my next employer. I feel they are very dishonest. On the other hand, I want to make it sure that I have worked over the time. So: Should my CV contain the not-so-good or even awful employers that may be fooling people to work there? I am pretty sure everyone knows the firm and its habbits, circles are small but people are afraid to speak.

  Read the article

• Using nested public classes to organize constants

  - by FrustratedWithFormsDesigner

  I'm working on an application with many constants. At the last code review it came up that the constants are too scattered and should all be organized into a single "master" constants file. The disagreement is about how to organize them. The majority feel that using the constant name should be good enough, but this will lead to code that looks like this: public static final String CREDITCARD_ACTION_SUBMITDATA = "6767"; public static final String CREDITCARD_UIFIELDID_CARDHOLDER_NAME = "3959854"; public static final String CREDITCARD_UIFIELDID_EXPIRY_MONTH = "3524"; public static final String CREDITCARD_UIFIELDID_ACCOUNT_ID = "3524"; ... public static final String BANKPAYMENT_UIFIELDID_ACCOUNT_ID = "9987"; I find this type of naming convention to be cumbersome. I thought it might be easier to use public nested class, and have something like this: public class IntegrationSystemConstants { public class CreditCard { public static final String UI_EXPIRY_MONTH = "3524"; public static final String UI_ACCOUNT_ID = "3524"; ... } public class BankAccount { public static final String UI_ACCOUNT_ID = "9987"; ... } } This idea wasn't well received because it was "too complicated" (I didn't get much detail as to why this might be too complicated). I think this creates a better division between groups of related constants and the auto-complete makes it easier to find these as well. I've never seen this done though, so I'm wondering if this is an accepted practice or if there's better reasons that it shouldn't be done.

  Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >