Search Results

Search found 29101 results on 1165 pages for 'thread local storage'.

Page 199/1165 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >

• Git is not using the first editor in my $PATH

  - by GuillaumeA

  I am using OS X 10.8, and I used brew to install a more recent version of emacs than the one shipped with OS X. The newer emacs binary is installed in /usr/local/bin (24.2.1), and the old "shipped-with-osx" one in /usr/bin (22.1.1). I updated my $PATH env variable by prepending /usr/local/bin to it. It works fine in my shell (ie. typing emacs runs the 24.2.1 version), but when git opens the editor, the emacs version is 22.1.1. Isn't git supposed to use $PATH to find the editor I want to use ? Additional informations: $ type -a emacs emacs is /usr/local/bin/emacs emacs is /usr/bin/emacs emacs is /usr/local/bin/emacs $ env PATH=/usr/local/bin:/usr/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin SHELL=/bin/zsh PAGER=most EDITOR=emacs -nw _=/usr/bin/env Please note that I'd prefer not to set the absolute path of my editor directly in my git conf, as I use this conf across multiple systems. EDIT: Here's an bit of my .zshrc: # Mac OS X if [ `uname` = "Darwin" ]; then # Brew binaries PATH="/usr/local/bin":"/usr/local/sbin":$PATH else # Everyone else (Linux) # snip fi So, yes, I could add a line export EDITOR='/usr/local/bin emacs -nw' in the first if, but I'd like to understand why git is not using my PATH variable :)

  Read the article

• how to differentiate between two threads

  - by mithun1538

  Hello everyone, I have the following code in my program: Thread getUsersist, getChatUsers; getUsersList = new Thread(this, "getOnlineUsers"); getUsersList.start(); getChatUsers = new Thread(this, "getChatUsers"); getChatUsers.start(); In run(), I wish to know which thread is using run(). If its "getOnlineUsers" i will do something, If it is "getChatUsers" I will do something else. So how do I know which thread is using run()?

  Read the article

• Pillar Axiom OpenWorld Highlights

  - by uwes

  During the Storage General Session at Oracle OpenWorld Conference 2012 in San Francisco, the following Axiom-related announcements were made: Oracle Platinum Services for Axiom 600: Extending Oracle's Platinum Services to Axiom 600 as a standalone product –  the same level of service and support you get with Exadata – 24/7 fault monitoring, dedicated response and escalation management to meet enterprise-grade SLA’s, patch planning and management. Oracle Enterprise Manager Axiom Plug-in: Allowing DBA's to manage, maintain, monitor and provision the Axiom 600 storage system from Oracle EM. Oracle Virtual Machine Axiom Plug-in: Allowing Oracle VM and System Administrators to manage, maintain, monitor and provision the Axiom 600 storage system from Oracle VM using Storage Connect. Oracle Axiom Data Protection Manager 3.1: Leveraging Axiom's Copy Services, System Administrators can automatically create Application Consistent Clones of critical Windows and Oracle DataBase environments for quick recovery. For More Information Go To: Oracle.com Pillar Axiom Page Oracle Technology Network SAN Page

  Read the article

• Java Download Concurrent Data

  - by xger86x

  Hi, i'm developing an app which download map tiles around different places in a city. To do this, i have one thread for each place in which i select the tiles and create a thread to download each. Well, the question is how to avoid creating a thread for a tile that already exists in the thread pool. Should not just check if the file exists, since it is possible that the thread for that tile already exists (other place already need that tile) but the file has not been created- Any idea? Thanks

  Read the article

• Converting a video to flv format by using ffmpeg is working in local but not working in server

  - by kishore

  Hi all, I want to convert a video to flv format. I am using ffmpeg to convert the video. I am using following code. exec("C:/wamp/www/newtip/ffmpeg/ffmpeg -i C:/wamp/www/newtip/ffmpeg/videos/".$name." -ar 22050 -ab 32 -f flv -s 320x240 C:/wamp/www/newtip/ffmpeg/players/".$name_s.".flv"); It is working correctly in the local system. But in the server it is not working correctly. In the server i changed the code as below exec("http://www.mydomain.com/newtip/ffmpeg/ffmpeg -i http://www.mydomain.com/newtip/ffmpeg/videos/".$name." -ar 22050 -ab 32 -f flv -s 320x240 http://www.mydomain.com/newtip/ffmpeg/players/".$name_s.".flv"); In local I have given the Source path as C:/wamp/www/newtip/ But in server i have given the path as http://www.mydomain.com/newtip/ .I think in the server the path is wrong. Can anybody tell me how to give the path in the server?

  Read the article

• Is there a way to prevent SQL Server silently truncating data in local variables and stored procedure parameters?

  - by Luke Woodward

  I recently encountered an issue while porting an app to SQL Server. It turned out that this issue was caused by a stored procedure parameter being declared too short for the data being passed to it: the parameter was declared as VARCHAR(100) but in one case was being passed more than 100 characters of data. What surprised me was that SQL Server didn't report any errors or warnings -- it just silently truncated the data to 100 characters. The following SQLCMD session demonstrates this: 1 create procedure WhereHasMyDataGone (@data varchar(5)) as 2 begin 3 print 'Your data is ''' + @data + '''.'; 4 end; 5 go 1 exec WhereHasMyDataGone '123456789'; 2 go Your data is '12345'. Local variables also exhibit the same behaviour: 1 declare @s varchar(5) = '123456789'; 2 print @s; 3 go 12345 Is there an option I can enable to have SQL Server report errors (or at least warnings) in such situations? Or should I just declare all local variables and stored procedure parameters as VARCHAR(MAX) or NVARCHAR(MAX)?

  Read the article

• Basic Android game loop having issues

  - by WillDaBeast509

  I've set up a very basic game loop that should draw a circle, run 100 times, then draw another. I also have a text field that should display how many times the loop has ran. However, the screen seems to not update. It displays a different value for the tick count (different each time the app is ran) and simply stays there. After exiting the app, I get an error saying "Unfortunately, MyApp has stopped." Here is the relevant code: DrawView public class DrawView extends SurfaceView implements SurfaceHolder.Callback { Paint p = new Paint(); MainThread thread; private int y=0; public DrawView(Context c) { super(c); thread = new MainThread(this, getHolder()); thread.running = true; getHolder().addCallback(this); setFocusable(true); } public void draw(Canvas c) { if(c==null) return; //super.onDraw(c); c.drawColor(Color.WHITE); p.setColor(Color.RED); p.setTextSize(32); p.setTypeface(Typeface.SANS_SERIF); c.drawCircle(getWidth()/2-100,getHeight()/2, 50, p); c.drawText("y = " + y, 50, 50, p); if(y>=100) { Log.i("DRAW", "drawing circle"); c.drawCircle(getWidth()/2+100,getHeight()/2, 50, p); } else y++; Log.i("INFO", "y = " + y); } @Override public boolean onTouchEvent(MotionEvent event) { return true; } public void onDraw(Canvas c){} public void surfaceCreated(SurfaceHolder p1) { thread.start(); } public void surfaceChanged(SurfaceHolder p1, int p2, int p3, int p4) { // TODO: Implement this method } public void surfaceDestroyed(SurfaceHolder p1) { thread.running = false; boolean retry = true; while (retry) { try { thread.join(); retry = false; } catch (InterruptedException e) { Log.i("EX", "cathing exception"); } } } } MainThread public class MainThread extends Thread { private DrawView page; private SurfaceHolder holder; public boolean running; public MainThread(DrawView p, SurfaceHolder h) { super(); page = p; holder = h; } @Override public void run() { while(running) { Canvas c = holder.lockCanvas(); page.draw(c); holder.unlockCanvasAndPost(c); } } } Here is an example log outupt: http://pastebin.com/tM9dUPuk It counts the number of ticks correctly and should draw the second circle, but the screen looks like its not updating. After closing the app, the log continues to run and keep outputting "y = 100 drawing circle" until it crashes and shows the error report. What is going on and how can I fix these two problems?

  Read the article

• Syntax errors on Heroku, but not on local server (postgresql related?)

  - by Phil_Ken_Sebben

  I'm trying to deploy my first app on Heroku (rails 3). It works fine on my local server, but when I pushed it to Heroku and ran it, it crashes, giving a number of syntax errors. These are related to a collection of scopes I use like the one below: scope :scored, lambda { |score = nil| score.nil? ? {} : where('products.votes_count >= ?', score) } it produces errors of this form: "syntax error, unexpected '=', expecting '|' " "syntax error, unexpected '}', expecting kEND" Why is this syntax making Heroku choke and how can I correct it? Thanks! EDIT: I was using sqlite on my local machine and Heroku does not support that. Trying to make sure the db is properly configured for PG. I believe I have done that by specifying in the gemfile that sqlite only be used in development. Yet I still get these syntax errors, that interrupt even the db:migrate. EDIT: So now it seems more likely that my scope syntax doesn't work in postgreSQL. Does anyone know how to convert this properly?

  Read the article

• nginx load balance with IIS backend servers waiting Host header

  - by Elgreco08

  i have a ubuntu 10.04 with nginx /0.8.54 running as a load balance proxy named: www.local.com I have two IIS backend servers which responds on Host header request web1.local.com web2.local.com Problem: When i hit my nginx balancer on www.local.com my backend servers respond with the default server blank webpage (IIS default page) since they are waiting for a right host header (e.g. web1.local.com) my nginx.conf upstream backend { server web1.local.com:80; server web2.local.com:80; } server { listen 80; location / { proxy_pass http://backend; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $proxy_host; } } any hint ?

  Read the article

• Can I avoid a threaded UDP socket in Pyton dropping data?

  - by 666craig

  First off, I'm new to Python and learning on the job, so be gentle! I'm trying to write a threaded Python app for Windows that reads data from a UDP socket (thread-1), writes it to file (thread-2), and displays the live data (thread-3) to a widget (gtk.Image using a gtk.gdk.pixbuf). I'm using queues for communicating data between threads. My problem is that if I start only threads 1 and 3 (so skip the file writing for now), it seems that I lose some data after the first few samples. After this drop it looks fine. Even by letting thread 1 complete before running thread 3, this apparent drop is still there. Apologies for the length of code snippet (I've removed the thread that writes to file), but I felt removing code would just prompt questions. Hope someone can shed some light :-) import socket import threading import Queue import numpy import gtk gtk.gdk.threads_init() import gtk.glade import pygtk class readFromUDPSocket(threading.Thread): def __init__(self, socketUDP, readDataQueue, packetSize, numScans): threading.Thread.__init__(self) self.socketUDP = socketUDP self.readDataQueue = readDataQueue self.packetSize = packetSize self.numScans = numScans def run(self): for scan in range(1, self.numScans + 1): buffer = self.socketUDP.recv(self.packetSize) self.readDataQueue.put(buffer) self.socketUDP.close() print 'myServer finished!' class displayWithGTK(threading.Thread): def __init__(self, displayDataQueue, image, viewArea): threading.Thread.__init__(self) self.displayDataQueue = displayDataQueue self.image = image self.viewWidth = viewArea[0] self.viewHeight = viewArea[1] self.displayData = numpy.zeros((self.viewHeight, self.viewWidth, 3), dtype=numpy.uint16) def run(self): scan = 0 try: while True: if not scan % self.viewWidth: scan = 0 buffer = self.displayDataQueue.get(timeout=0.1) self.displayData[:, scan, 0] = numpy.fromstring(buffer, dtype=numpy.uint16) self.displayData[:, scan, 1] = numpy.fromstring(buffer, dtype=numpy.uint16) self.displayData[:, scan, 2] = numpy.fromstring(buffer, dtype=numpy.uint16) gtk.gdk.threads_enter() self.myPixbuf = gtk.gdk.pixbuf_new_from_data(self.displayData.tostring(), gtk.gdk.COLORSPACE_RGB, False, 8, self.viewWidth, self.viewHeight, self.viewWidth * 3) self.image.set_from_pixbuf(self.myPixbuf) self.image.show() gtk.gdk.threads_leave() scan += 1 except Queue.Empty: print 'myDisplay finished!' pass def quitGUI(obj): print 'Currently active threads: %s' % threading.enumerate() gtk.main_quit() if __name__ == '__main__': # Create socket (IPv4 protocol, datagram (UDP)) and bind to address socketUDP = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) host = '192.168.1.5' port = 1024 socketUDP.bind((host, port)) # Data parameters samplesPerScan = 256 packetsPerSecond = 1200 packetSize = 512 duration = 1 # For now, set a fixed duration to log data numScans = int(packetsPerSecond * duration) # Create array to store data data = numpy.zeros((samplesPerScan, numScans), dtype=numpy.uint16) # Create queue for displaying from readDataQueue = Queue.Queue(numScans) # Build GUI from Glade XML file builder = gtk.Builder() builder.add_from_file('GroundVue.glade') window = builder.get_object('mainwindow') window.connect('destroy', quitGUI) view = builder.get_object('viewport') image = gtk.Image() view.add(image) viewArea = (1200, samplesPerScan) # Instantiate & start threads myServer = readFromUDPSocket(socketUDP, readDataQueue, packetSize, numScans) myDisplay = displayWithGTK(readDataQueue, image, viewArea) myServer.start() myDisplay.start() gtk.gdk.threads_enter() gtk.main() gtk.gdk.threads_leave() print 'gtk.main finished!'

  Read the article

• Virtual Hosts Not Working (12.10)

  - by lolajl

  I'm trying to get virtual hosts up and running on my Ubuntu laptop that has 12.10 installed. I'm running Apache2, and I enabled the virtual hosting module. When I go to 12.0.0.1, I'm able to get the default page. When I go to example.local, I just get the search engine results, instead of the "hey, you're seeing this" page I set up in that directory (/var/www/example.local). I even made sure I have only one "NameVirtualHost *:80" variable active. Checking error.log, nothing obvious seems to jump out as being amiss. here's what I have in the respective files: example.local ServerName example.local ServerAdmin webmaster@localhost DocumentRoot /var/www/example.local <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/example.local> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined ports.conf NameVirtualHost *:80 Listen 80 hosts 127.0.0.1 localhost 127.0.1.1 KitaiGorod 127.0.0.1 example.local ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters

  Read the article

• Come See Us Next Week at VMworld 2014

  - by Larry Wake

  If you're at VMworld 2014 next week in San Francisco, come drop by booth 205.  We'll have folks from both the Oracle Solaris and Oracle ZFS Storage teams, so you can learn a lot more about what's new in Oracle Solaris 11.2, plus what the storage team has been up to, as they unleash their "it's perfect for virtualization" architecture, with a series of new VMware API integrations, that crushes both the other big-name storage vendors and the all-flash start-ups.

  Read the article

• Why am I unable to telnet to a local port that has a listening service?

  - by Skip Huffman

  I suspect this is either a very simple question, or a very complex one. I have a headless server running ubuntu 10.04 that I can ssh into. I have full root access to the system. I am trying to set up an ssh tunnel to allow me to vnc to the system (but that isn't my question. I have vnc running on port 5903, here is the netstat output for that: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:5903 0.0.0.0:* LISTEN 7173/Xtightvnc tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 465/sshd But when I try to telnet to that port, from within the same system and login, I get unable to connect errors # telnet localhost 5903 Trying ::1... Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection timed out I am able to telnet to port 22 (as a verification) ~# telnet localhost 22 Trying ::1... Connected to localhost. Escape character is '^]'. SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu7 I have tried to open up any possible ports using ufw (probably clumsy fashion) # ufw status numbered Status: active To Action From -- ------ ---- [ 1] 5903 ALLOW IN Anywhere [ 2] 22 ALLOW IN Anywhere What else might be blocking this connection locally? Thank you, Edit: The only reference to port 5903 in iptable -L -n is this: Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5903 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5903 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:8080 I can post the whole output if that will be useful. hosts.allow and hosts.deny both contain only comments. Re-Edit: Some other questions pointed me to nmap, so I ran a portscan through that utility: # nmap -v -sT localhost -p1-65535 Starting Nmap 5.00 ( http://nmap.org ) at 2011-11-09 09:58 PST NSE: Loaded 0 scripts for scanning. Warning: Hostname localhost resolves to 2 IPs. Using 127.0.0.1. Initiating Connect Scan at 09:58 Scanning localhost (127.0.0.1) [65535 ports] Discovered open port 22/tcp on 127.0.0.1 Connect Scan Timing: About 18.56% done; ETC: 10:01 (0:02:16 remaining) Connect Scan Timing: About 44.35% done; ETC: 10:00 (0:01:17 remaining) Completed Connect Scan at 10:00, 112.36s elapsed (65535 total ports) Host localhost (127.0.0.1) is up (0.00s latency). Interesting ports on localhost (127.0.0.1): Not shown: 65533 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 112.43 seconds Raw packets sent: 0 (0B) | Rcvd: 0 (0B) I think this shows that 5903 is blocked somehow. Which I pretty much knew. The question remains what is blocking it and how to modify. Re-re-edit: To check Paul Lathrop's suggested answer, I first verified my ip address with ifconfig: eth0 Link encap:Ethernet HWaddr 02:16:3e:42:28:8f inet addr:10.0.10.3 Bcast:10.0.10.255 Mask:255.255.255.0 Then tried to telnet to 5903 from that address: # telnet 10.0.10.3 5903 Trying 10.0.10.3... telnet: Unable to connect to remote host: Connection timed out No luck. Re-re-re-re-edit: Ok, I think I have isolated it a bit to vncserver, not the firewall, darn it. I shut off vncserver and had netcat listen on port 5903. My vnc client then was able to establish a connnection and sit and wait for a response. Looks like I should be chasing a vnc problem. At least that is progress Thanks for the help

  Read the article

• "domain crashed" when creating new Xen instance

  - by user47650

  I have downloaded a Xen virtual machine image from the appscale project, and I am trying to start it up. However once I run the command; xm create -c -f xen.conf The instance immediately crashes and provides no console output. however it produces logs that I have posted below. but this is the error; [2011-03-01 12:34:03 xend.XendDomainInfo 3580] WARNING (XendDomainInfo:1178) Domain has crashed: name=appscale-1.4b id=10. I have managed to mount the root.img file locally and verify that it is actually an ext3 file system. I am running Xen 3.0.3 that is a stock RPM from the CentOS 5 repos; # rpm -qa | grep -i xen xen-libs-3.0.3-105.el5_5.5 xen-3.0.3-105.el5_5.5 xen-libs-3.0.3-105.el5_5.5 kernel-xen-2.6.18-194.32.1.el5 any suggestions on how to proceed with troubleshooting? (i am a newbie to Xen) so far I have enabled console logging, but the log file is empty. ==> domain-builder-ng.log <== xc_dom_allocate: cmdline=" ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console", features="" xc_dom_kernel_file: filename="/boot/vmlinuz-2.6.27-7-server" xc_dom_malloc_filemap : 2284 kB xc_dom_ramdisk_file: filename="/boot/initrd.img-2.6.27-7-server" xc_dom_malloc_filemap : 9005 kB xc_dom_boot_xen_init: ver 3.1, caps xen-3.0-x86_64 xen-3.0-x86_32p xc_dom_parse_image: called xc_dom_find_loader: trying ELF-generic loader ... failed xc_dom_find_loader: trying Linux bzImage loader ... xc_dom_malloc : 9875 kB xc_dom_do_gunzip: unzip ok, 0x234bb2 -> 0x9a4de0 OK elf_parse_binary: phdr: paddr=0x200000 memsz=0x447000 elf_parse_binary: phdr: paddr=0x647000 memsz=0xab888 elf_parse_binary: phdr: paddr=0x6f3000 memsz=0x908 elf_parse_binary: phdr: paddr=0x6f4000 memsz=0x1c2f9c elf_parse_binary: memory: 0x200000 -> 0x8b6f9c elf_xen_parse_note: GUEST_OS = "linux" elf_xen_parse_note: GUEST_VERSION = "2.6" elf_xen_parse_note: XEN_VERSION = "xen-3.0" elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 elf_xen_parse_note: ENTRY = 0xffffffff8071e200 elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80209000 elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" elf_xen_parse_note: PAE_MODE = "yes" elf_xen_parse_note: LOADER = "generic" elf_xen_parse_note: unknown xen elf note (0xd) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 elf_xen_parse_note: PADDR_OFFSET = 0x0 elf_xen_addr_calc_check: addresses: virt_base = 0xffffffff80000000 elf_paddr_offset = 0x0 virt_offset = 0xffffffff80000000 virt_kstart = 0xffffffff80200000 virt_kend = 0xffffffff808b6f9c virt_entry = 0xffffffff8071e200 xc_dom_parse_elf_kernel: xen-3.0-x86_64: 0xffffffff80200000 -> 0xffffffff808b6f9c xc_dom_mem_init: mem 1024 MB, pages 0x40000 pages, 4k each xc_dom_mem_init: 0x40000 pages xc_dom_boot_mem_init: called x86_compat: guest xen-3.0-x86_64, address size 64 xc_dom_malloc : 2048 kB ==> xend.log <== [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2114) UUID Created: True [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2115) Devices to release: [], domid = 9 [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2127) Releasing PVFB backend devices ... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:207) XendDomainInfo.create(['domain', ['domid', 9], ['uuid', 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0'], ['vcpus', 1], ['vcpu_avail', 1], ['cpu_cap', 0], ['cpu_weight', 256], ['memory', 1024], ['shadow_memory', 0], ['maxmem', 1024], ['features', ''], ['name', 'appscale-1.4b'], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['image', ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']]], ['cpus', []], ['device', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]], ['device', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']]], ['state', '----c-'], ['shutdown_reason', 'crash'], ['cpu_time', 0.000339131], ['online_vcpus', 1], ['up_time', '0.952092885971'], ['start_time', '1299011639.92'], ['store_mfn', 1169289], ['console_mfn', 1169288]]) [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:329) parseConfig: config is ['domain', ['domid', 9], ['uuid', 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0'], ['vcpus', 1], ['vcpu_avail', 1], ['cpu_cap', 0], ['cpu_weight', 256], ['memory', 1024], ['shadow_memory', 0], ['maxmem', 1024], ['features', ''], ['name', 'appscale-1.4b'], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['image', ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']]], ['cpus', []], ['device', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]], ['device', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']]], ['state', '----c-'], ['shutdown_reason', 'crash'], ['cpu_time', 0.000339131], ['online_vcpus', 1], ['up_time', '0.952092885971'], ['start_time', '1299011639.92'], ['store_mfn', 1169289], ['console_mfn', 1169288]] [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:446) parseConfig: result is {'features': '', 'image': ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']], 'cpus': [], 'vcpu_avail': 1, 'backend': [], 'uuid': 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'on_reboot': 'restart', 'cpu_weight': 256.0, 'memory': 1024, 'cpu_cap': 0, 'localtime': None, 'timer_mode': None, 'start_time': 1299011639.9200001, 'on_poweroff': 'destroy', 'on_crash': 'restart', 'device': [('vif', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]), ('vbd', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']])], 'bootloader': None, 'maxmem': 1024, 'shadow_memory': 0, 'name': 'appscale-1.4b', 'bootloader_args': None, 'vcpus': 1, 'cpu': None} [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1784) XendDomainInfo.construct: None [2011-03-01 12:34:02 xend 3580] DEBUG (balloon:145) Balloon: 3034420 KiB free; need 4096; done. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1953) XendDomainInfo.initDomain: 10 256.0 [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1994) _initDomain:shadow_memory=0x0, maxmem=0x400, memory=0x400. [2011-03-01 12:34:02 xend 3580] DEBUG (balloon:145) Balloon: 3034412 KiB free; need 1048576; done. [2011-03-01 12:34:02 xend 3580] INFO (image:139) buildDomain os=linux dom=10 vcpus=1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:208) domid = 10 [2011-03-01 12:34:02 xend 3580] DEBUG (image:209) memsize = 1024 [2011-03-01 12:34:02 xend 3580] DEBUG (image:210) image = /boot/vmlinuz-2.6.27-7-server [2011-03-01 12:34:02 xend 3580] DEBUG (image:211) store_evtchn = 1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:212) console_evtchn = 2 [2011-03-01 12:34:02 xend 3580] DEBUG (image:213) cmdline = ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console [2011-03-01 12:34:02 xend 3580] DEBUG (image:214) ramdisk = /boot/initrd.img-2.6.27-7-server [2011-03-01 12:34:02 xend 3580] DEBUG (image:215) vcpus = 1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:216) features = ==> domain-builder-ng.log <== xc_dom_build_image: called xc_dom_alloc_segment: kernel : 0xffffffff80200000 -> 0xffffffff808b7000 (pfn 0x200 + 0x6b7 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x200+0x6b7 at 0x2aaaab5f6000 elf_load_binary: phdr 0 at 0x0x2aaaab5f6000 -> 0x0x2aaaaba3d000 elf_load_binary: phdr 1 at 0x0x2aaaaba3d000 -> 0x0x2aaaabae8888 elf_load_binary: phdr 2 at 0x0x2aaaabae9000 -> 0x0x2aaaabae9908 elf_load_binary: phdr 3 at 0x0x2aaaabaea000 -> 0x0x2aaaabb9a004 xc_dom_alloc_segment: ramdisk : 0xffffffff808b7000 -> 0xffffffff82382000 (pfn 0x8b7 + 0x1acb pages) xc_dom_malloc : 160 kB xc_dom_pfn_to_ptr: domU mapping: pfn 0x8b7+0x1acb at 0x2aaab0000000 xc_dom_do_gunzip: unzip ok, 0x8cb5e7 -> 0x1aca210 xc_dom_alloc_segment: phys2mach : 0xffffffff82382000 -> 0xffffffff82582000 (pfn 0x2382 + 0x200 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x2382+0x200 at 0x2aaab1acb000 xc_dom_alloc_page : start info : 0xffffffff82582000 (pfn 0x2582) xc_dom_alloc_page : xenstore : 0xffffffff82583000 (pfn 0x2583) xc_dom_alloc_page : console : 0xffffffff82584000 (pfn 0x2584) nr_page_tables: 0x0000ffffffffffff/48: 0xffff000000000000 -> 0xffffffffffffffff, 1 table(s) nr_page_tables: 0x0000007fffffffff/39: 0xffffff8000000000 -> 0xffffffffffffffff, 1 table(s) nr_page_tables: 0x000000003fffffff/30: 0xffffffff80000000 -> 0xffffffffbfffffff, 1 table(s) nr_page_tables: 0x00000000001fffff/21: 0xffffffff80000000 -> 0xffffffff827fffff, 20 table(s) xc_dom_alloc_segment: page tables : 0xffffffff82585000 -> 0xffffffff8259c000 (pfn 0x2585 + 0x17 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x2585+0x17 at 0x2aaab1ccb000 xc_dom_alloc_page : boot stack : 0xffffffff8259c000 (pfn 0x259c) xc_dom_build_image : virt_alloc_end : 0xffffffff8259d000 xc_dom_build_image : virt_pgtab_end : 0xffffffff82800000 xc_dom_boot_image: called arch_setup_bootearly: doing nothing xc_dom_compat_check: supported guest type: xen-3.0-x86_64 <= matches xc_dom_compat_check: supported guest type: xen-3.0-x86_32p xc_dom_update_guest_p2m: dst 64bit, pages 0x40000 clear_page: pfn 0x2584, mfn 0x11d788 clear_page: pfn 0x2583, mfn 0x11d789 xc_dom_pfn_to_ptr: domU mapping: pfn 0x2582+0x1 at 0x2aaab1ce2000 start_info_x86_64: called setup_hypercall_page: vaddr=0xffffffff80209000 pfn=0x209 domain builder memory footprint allocated malloc : 12139 kB anon mmap : 0 bytes mapped file mmap : 11289 kB domU mmap : 35 MB arch_setup_bootlate: shared_info: pfn 0x0, mfn 0xd6fe1 shared_info_x86_64: called vcpu_x86_64: called vcpu_x86_64: cr3: pfn 0x2585 mfn 0x11d787 launch_vm: called, ctxt=0x97b21f8 xc_dom_release: called ==> xend.log <== [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:114) DevController: writing {'mac': '00:16:3B:72:10:E4', 'handle': '0', 'protocol': 'x86_64-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vif/10/0'} to /local/domain/10/device/vif/0. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:116) DevController: writing {'domain': 'appscale-1.4b', 'handle': '0', 'script': '/etc/xen/scripts/vif-bridge', 'state': '1', 'frontend': '/local/domain/10/device/vif/0', 'mac': '00:16:3B:72:10:E4', 'online': '1', 'frontend-id': '10'} to /local/domain/0/backend/vif/10/0. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:634) Checking for duplicate for uname: /local/xen/domains/appscale1.4/root.img [file:/local/xen/domains/appscale1.4/root.img], dev: sda1:disk, mode: w [2011-03-01 12:34:02 xend 3580] DEBUG (blkif:27) exception looking up device number for sda1:disk: [Errno 2] No such file or directory: '/dev/sda1:disk' [2011-03-01 12:34:02 xend 3580] DEBUG (blkif:27) exception looking up device number for sda1: [Errno 2] No such file or directory: '/dev/sda1' [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:114) DevController: writing {'virtual-device': '2049', 'device-type': 'disk', 'protocol': 'x86_64-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vbd/10/2049'} to /local/domain/10/device/vbd/2049. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:116) DevController: writing {'domain': 'appscale-1.4b', 'frontend': '/local/domain/10/device/vbd/2049', 'format': 'raw', 'dev': 'sda1', 'state': '1', 'params': '/local/xen/domains/appscale1.4/root.img', 'mode': 'w', 'online': '1', 'frontend-id': '10', 'type': 'file'} to /local/domain/0/backend/vbd/10/2049. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:993) Storing VM details: {'shadow_memory': '0', 'uuid': 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'on_reboot': 'restart', 'start_time': '1299011642.74', 'on_poweroff': 'destroy', 'name': 'appscale-1.4b', 'xend/restart_count': '0', 'vcpus': '1', 'vcpu_avail': '1', 'memory': '1024', 'on_crash': 'restart', 'image': "(linux (kernel /boot/vmlinuz-2.6.27-7-server) (ramdisk /boot/initrd.img-2.6.27-7-server) (ip :1.2.3.4::::eth0:dhcp) (root '/dev/sda1 ro') (args 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console'))", 'maxmem': '1024'} [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1028) Storing domain details: {'console/ring-ref': '1169288', 'console/port': '2', 'name': 'appscale-1.4b', 'console/limit': '1048576', 'vm': '/vm/d5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'domid': '10', 'cpu/0/availability': 'online', 'memory/target': '1048576', 'store/ring-ref': '1169289', 'store/port': '1'} [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:158) Waiting for devices vif. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:164) Waiting for 0. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1250) XendDomainInfo.handleShutdownWatch [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vif/10/0/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vif/10/0/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:523) hotplugStatusCallback 1. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices usb. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vbd. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:164) Waiting for 2049. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vbd/10/2049/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vbd/10/2049/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:523) hotplugStatusCallback 1. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices irq. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vkbd. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vfb. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices pci. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices ioports. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices tap. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vtpm. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] WARNING (XendDomainInfo:1178) Domain has crashed: name=appscale-1.4b id=10. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] ERROR (XendDomainInfo:2654) VM appscale-1.4b restarting too fast (2.275545 seconds since the last restart). Refusing to restart to avoid loops. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2189) XendDomainInfo.destroy: domid=10 ==> xen-hotplug.log <== Nothing to flush. ==> xend.log <== [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2114) UUID Created: True [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2115) Devices to release: [], domid = 10 [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2127) Releasing PVFB backend devices ... And this is the xen.conf file that I am using; # cat xen.conf # Configuration file for the Xen instance AppScale, created # bn VMBuilder kernel = '/boot/vmlinuz-2.6.27-7-server' ramdisk = '/boot/initrd.img-2.6.27-7-server' memory = 1024 vcpus = 1 root = '/dev/sda1 ro' disk = [ 'file:/local/xen/domains/appscale1.4/root.img,sda1,w', ] name = 'appscale-1.4b' dhcp = 'dhcp' vif = [ 'mac=00:16:3B:72:10:E4' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' extra = 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console'

  Read the article

• Cannot ping Localhost so I can't shutdown Tomcat

  - by gav

  Hi, I installed Tomcat 6 using the tar-ball via wget. Startup of the server is fine but on shutdown I get a timeout exception. root@88:/usr/local/tomcat/logs# /usr/local/tomcat/bin/shutdown.sh Using CATALINA_BASE: /usr/local/tomcat Using CATALINA_HOME: /usr/local/tomcat Using CATALINA_TMPDIR: /usr/local/tomcat/temp Using JRE_HOME: /usr Using CLASSPATH: /usr/local/tomcat/bin/bootstrap.jar 30-Mar-2010 17:33:41 org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection timed out at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) ... I read that this might be because I have a firewall blocking incoming connections on the shutdown port (8005). I have a default Ubuntu 9.04 installation running on a VPS with no rules in my iptables. How can I tell if that port is blocked? How can I check that the server is listening for connections on 8005? Bizarrely pinging localhost or the IP of my server fails from the server itself, whereas pinging the IP of my server from another machine succeeds. -------- EDIT -------- (In reply to Davey) Thanks for all the tips and suggestions! netstat -nlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:8005 0.0.0.0:* LISTEN 9611/java tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 28505/mysqld tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 9611/java tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN ... So we can see that tomcat is listening, I just don't seem to be able to reach it. root@88:/usr/local/tomcat# telnet localhost 8005 Trying 127.0.0.1... Trying to telnet to the port Hangs indefinitely. I have no rules in my iptables so I don't think it's a firewall thing. root@88:/usr/local/tomcat# iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination This is the contents of /etc/hosts 127.0.0.1 localhost.localdomain localhost # Auto-generated hostname. Please do not remove this comment. 88.198.31.14 88.198.31.14 88 88 But I still can't ping localhost... do I need to check a loopback device is enabled properly or something? (I'm unsure how to do that if you do say yes :)). root@88:/usr/local/tomcat# ping localhost PING localhost (127.0.0.1) 56(84) bytes of data. --- localhost ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 5999ms Trying to find out what the loop back is configured as; root@88:~# ifconfig lo lo Link encap:Local Loopback LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) SOLUTION THANKS TO DAVEY I needed to bring up the interface (Not sure why it wasn't running). ifconfig lo up did the trick. root@88:~# ifconfig lo up root@88:~# ifconfig lo lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@88:~# ping localhost PING localhost.localdomain (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.025 ms Thanks again, Gav

  Read the article

• Elusive race condition in Java

  - by nasufara

  I am creating a graphing calculator. In an attempt to squeeze some more performance out of it, I added some multithreaded to the line calculator. Essentially what my current implementation does is construct a thread-safe Queue of X values, then start however many threads it needs, each one calculating a point on the line using the queue to get its values, and then ordering the points using a HashMap when the calculations are done. This implementation works great, and that's not where my race condition is (merely some background info). In examining the performance results from this, I found that the HashMap is a performance bottleneck, since I do that synchronously on one thread. So I figured that ordering each point as its calculated would work best. I tried a PriorityQueue, but that was slower than the HashMap. I ended up creating an algorithm that essentially works like this: I construct a list of X values to calculate, like in my current algorithm. I then copy that list of values into another class, unimaginatively and temporarily named BlockingList, which is responsible for ordering the points as they are calculated. BlockingList contains a put() method, which takes in two BigDecimals as parameters, the first the X value, the second the calculated Y value. put() will only accept a value if the X value is the next one on the list to be accepted in the list of X values, and will block until another thread gives it the next excepted value. For example, since that can be confusing, say I have two threads, Thread-1 and Thread-2. Thread-2 gets the X value 10.0 from the values queue, and Thread-1 gets 9.0. However, Thread-1 completes its calculations first, and calls put() before Thread-2 does. Because BlockingList is expecting to get 10.0 first, and not 9.0, it will block on Thread-1 until Thread-2 finishes and calls put(). Once Thread-2 gives BlockingList 10.0, it notify()s all waiting threads, and expects 9.0 next. This continues until BlockingList gets all of its expected values. (I apologise if that was hard to follow, if you need more clarification, just ask.) As expected by the question title, there is a race condition in here. If I run it without any System.out.printlns, it will sometimes lock because of conflicting wait() and notifyAll()s, but if I put a println in, it will run great. A small implementation of this is included below, and exhibits the same behavior: import java.math.BigDecimal; import java.util.concurrent.ConcurrentLinkedQueue; public class Example { public static void main(String[] args) throws InterruptedException { // Various scaling values, determined based on the graph size // in the real implementation BigDecimal xMax = new BigDecimal(10); BigDecimal xStep = new BigDecimal(0.05); // Construct the values list, from -10 to 10 final ConcurrentLinkedQueue<BigDecimal> values = new ConcurrentLinkedQueue<BigDecimal>(); for (BigDecimal i = new BigDecimal(-10); i.compareTo(xMax) <= 0; i = i.add(xStep)) { values.add(i); } // Contains the calculated values final BlockingList list = new BlockingList(values); for (int i = 0; i < 4; i++) { new Thread() { public void run() { BigDecimal x; // Keep looping until there are no more values while ((x = values.poll()) != null) { PointPair pair = new PointPair(); pair.realX = x; try { list.put(pair); } catch (Exception ex) { ex.printStackTrace(); } } } }.start(); } } private static class PointPair { public BigDecimal realX; } private static class BlockingList { private final ConcurrentLinkedQueue<BigDecimal> _values; private final ConcurrentLinkedQueue<PointPair> _list = new ConcurrentLinkedQueue<PointPair>(); public BlockingList(ConcurrentLinkedQueue<BigDecimal> expectedValues) throws InterruptedException { // Copy the values into a new queue BigDecimal[] arr = expectedValues.toArray(new BigDecimal[0]); _values = new ConcurrentLinkedQueue<BigDecimal>(); for (BigDecimal dec : arr) { _values.add(dec); } } public void put(PointPair item) throws InterruptedException { while (item.realX.compareTo(_values.peek()) != 0) { synchronized (this) { // Block until someone enters the next desired value wait(); } } _list.add(item); _values.poll(); synchronized (this) { notifyAll(); } } } } My question is can anybody help me find the threading error? Thanks!

  Read the article

• Why does File.Exists return false?

  - by Jonas Stawski

  I'm querying all images on the Android device as such: string[] columns = { MediaStore.Images.Media.InterfaceConsts.Data, MediaStore.Images.Media.InterfaceConsts.Id }; string orderBy = MediaStore.Images.Media.InterfaceConsts.Id; var imagecursor = ManagedQuery(MediaStore.Images.Media.ExternalContentUri, columns, null, null, orderBy); for (int i = 0; i < this.Count; i++) { imagecursor.MoveToPosition(i); Paths[i]= imagecursor.GetString(dataColumnIndex); Console.WriteLine(Paths[i]); Console.WriteLine(System.IO.File.Exists(Paths[i])); } The problem is that the output shows that some files don't exist. Here's a sample output: /storage/sdcard0/Download/On-Yom-Kippur-Jews-choose-different-shoes-VSETQJ6-x-large.jpg False /storage/sdcard0/Download/397277_10151250943161341_876027377_n.jpg False /storage/sdcard0/Download/Roxy_Cottontail_&_Melo-X_Present..._Some_Bunny_Love's_You.jpg False /storage/sdcard0/Download/album-The-Rolling-Stones-Some-Girls.jpg True /storage/sdcard0/Download/some-people-ust-dont-appreciate-fashion[1].jpg True /storage/sdcard0/Download/express.gif True ... /storage/sdcard0/Download/some-joys-are-expressed-better-in-silence.JPG False How is this possible? I downloaded these images myself from the internet! They should exist in disk.

  Read the article

• Yet another C# Deadlock Debugging Question

  - by Roo

  Hi All, I have a multi-threaded application build in C# using VS2010 Professional. It's quite a large application and we've experienced the classing GUI cross-threading and deadlock issues before, but in the past month we've noticed the appears to lock up when left idle for around 20-30 minutes. The application is irresponsive and although it will repaint itself when other windows are dragged in front of the application and over it, the GUI still appears to be locked... interstingly (unlike if the GUI thread is being used for a considerable amount of time) the Close, Maximise and minimise buttons are also irresponsive and when clicked the little (Not Responding...) text is not displayed in the title of the application i.e. Windows still seems to think it's running fine. If I break/pause the application using the debugger, and view the threads that are running. There are 3 threads of our managed code that are running, and a few other worker threads whom the source code cannot be displayed for. The 3 threads that run are: The main/GUI thread A thread that loops indefinitely A thread that loops indefinitely If I step into threads 2 and 3, they appear to be looping correctly. They do not share locks (even with the main GUI thread) and they are not using the GUI thread at all. When stepping into the main/GUI thread however, it's broken on Application.Run... This problem screams deadlock to me, but what I don't understand is if it's deadlock, why can't I see the line of code the main/GUI thread is hanging on? Any help will be greatly appreciated! Let me know if you need more information... Cheers, Roo -----------------------------------------------------SOLUTION-------------------------------------------------- Okay, so the problem is now solved. Thanks to everyone for their suggestions! Much appreciated! I've marked the answer that solved my initial problem of determining where on the main/UI thread the application hangs (I handn't turned off the "Enable Just My Code" option). The overall issue I was experiencing was indeed Deadlock, however. After obtaining the call-stack and popping the top half of it into Google I came across this which explains exactly what I was experiencing... http://timl.net/ This references a lovely guide to debugging the issue... http://www.aaronlerch.com/blog/2008/12/15/debugging-ui/ This identified a control I was constructing off the GUI thread. I did know this, however, and was marshalling calls correctly, but what I didn't realise was that behind the scenes this Control was subscribing to an event or set of events that are triggered when e.g. a Windows session is unlocked or the screensaver exits. These calls are always made on the main/UI thread and were blocking when it saw the call was made on the incorrect thread. Kim explains in more detail here... http://krgreenlee.blogspot.com/2007/09/onuserpreferencechanged-hang.html In the end I found an alternative solution which did not require this Control off the main/UI thread. That appears to have solved the problem and the application no longer hangs. I hope this helps anyone who's confronted by a similar problem. Thanks again to everyone on here who helped! (and indirectly, the delightful bloggers I've referenced above!) Roo -----------------------------------------------------SOLUTION II-------------------------------------------------- Aren't threading issues delightful...you think you've solved it, and a month down the line it pops back up again. I still believe the solution above resolved an issue that would cause simillar behaviour, but we encountered the problem again. As we spent a while debugging this, I thought I'd update this question with our (hopefully) final solution: The problem appears to have been a bug in the Infragistics components in the WinForms 2010.1 release (no hot fixes). We had been running from around the time the freeze issue appeared (but had also added a bunch of other stuff too). After upgrading to WinForms 2010.3, we've yet to reproduce the issue (deja vu). See my question here for a bit more information: 'http://stackoverflow.com/questions/4077822/net-4-0-and-the-dreaded-onuserpreferencechanged-hang'. Hans has given a nice summary of the general issue. I hope this adds a little to the suggestions/information surrounding the nutorious OnUserPreferenceChanged Hang (or whatever you'd like to call it). Cheers, Roo

  Read the article

• Handling file upload in a non-blocking manner

  - by Kaliyug Antagonist

  The background thread is here Just to make objective clear - the user will upload a large file and must be redirected immediately to another page for proceeding different operations. But the file being large, will take time to be read from the controller's InputStream. So I unwillingly decided to fork a new Thread to handle this I/O. The code is as follows : The controller servlet /** * @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse * response) */ protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { // TODO Auto-generated method stub System.out.println("In Controller.doPost(...)"); TempModel tempModel = new TempModel(); tempModel.uploadSegYFile(request, response); System.out.println("Forwarding to Accepted.jsp"); /*try { Thread.sleep(1000 * 60); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); }*/ request.getRequestDispatcher("/jsp/Accepted.jsp").forward(request, response); } The model class package com.model; import java.io.IOException; import java.util.concurrent.ExecutionException; import java.util.concurrent.Future; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import com.utils.ProcessUtils; public class TempModel { public void uploadSegYFile(HttpServletRequest request, HttpServletResponse response) { // TODO Auto-generated method stub System.out.println("In TempModel.uploadSegYFile(...)"); /* * Trigger the upload/processing code in a thread, return immediately * and notify when the thread completes */ try { FileUploaderRunnable fileUploadRunnable = new FileUploaderRunnable( request.getInputStream()); /* * Future<FileUploaderRunnable> future = ProcessUtils.submitTask( * fileUploadRunnable, fileUploadRunnable); * * FileUploaderRunnable processed = future.get(); * * System.out.println("Is file uploaded : " + * processed.isFileUploaded()); */ Thread uploadThread = new Thread(fileUploadRunnable); uploadThread.start(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } /* * catch (InterruptedException e) { // TODO Auto-generated catch block * e.printStackTrace(); } catch (ExecutionException e) { // TODO * Auto-generated catch block e.printStackTrace(); } */ System.out.println("Returning from TempModel.uploadSegYFile(...)"); } } The Runnable package com.model; import java.io.File; import java.io.FileInputStream; import java.io.FileNotFoundException; import java.io.FileOutputStream; import java.io.IOException; import java.io.InputStream; import java.nio.ByteBuffer; import java.nio.channels.Channels; import java.nio.channels.ReadableByteChannel; public class FileUploaderRunnable implements Runnable { private boolean isFileUploaded = false; private InputStream inputStream = null; public FileUploaderRunnable(InputStream inputStream) { // TODO Auto-generated constructor stub this.inputStream = inputStream; } public void run() { // TODO Auto-generated method stub /* Read from InputStream. If success, set isFileUploaded = true */ System.out.println("Starting upload in a thread"); File outputFile = new File("D:/06c01_output.seg");/* * This will be changed * later */ FileOutputStream fos; ReadableByteChannel readable = Channels.newChannel(inputStream); ByteBuffer buffer = ByteBuffer.allocate(1000000); try { fos = new FileOutputStream(outputFile); while (readable.read(buffer) != -1) { fos.write(buffer.array()); buffer.clear(); } fos.flush(); fos.close(); readable.close(); } catch (FileNotFoundException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } System.out.println("File upload thread completed"); } public boolean isFileUploaded() { return isFileUploaded; } } My queries/doubts : Spawning threads manually from the Servlet makes sense to me logically but scares me coding wise - the container isn't aware of these threads after all(I think so!) The current code is giving an Exception which is quite obvious - the stream is inaccessible as the doPost(...) method returns before the run() method completes : In Controller.doPost(...) In TempModel.uploadSegYFile(...) Returning from TempModel.uploadSegYFile(...) Forwarding to Accepted.jsp Starting upload in a thread Exception in thread "Thread-4" java.lang.NullPointerException at org.apache.coyote.http11.InternalInputBuffer.fill(InternalInputBuffer.java:512) at org.apache.coyote.http11.InternalInputBuffer.fill(InternalInputBuffer.java:497) at org.apache.coyote.http11.InternalInputBuffer$InputStreamInputBuffer.doRead(InternalInputBuffer.java:559) at org.apache.coyote.http11.AbstractInputBuffer.doRead(AbstractInputBuffer.java:324) at org.apache.coyote.Request.doRead(Request.java:422) at org.apache.catalina.connector.InputBuffer.realReadBytes(InputBuffer.java:287) at org.apache.tomcat.util.buf.ByteChunk.substract(ByteChunk.java:407) at org.apache.catalina.connector.InputBuffer.read(InputBuffer.java:310) at org.apache.catalina.connector.CoyoteInputStream.read(CoyoteInputStream.java:202) at java.nio.channels.Channels$ReadableByteChannelImpl.read(Unknown Source) at com.model.FileUploaderRunnable.run(FileUploaderRunnable.java:39) at java.lang.Thread.run(Unknown Source) Keeping in mind the point 1., does the use of Executor framework help me in anyway ? package com.utils; import java.util.concurrent.Future; import java.util.concurrent.ScheduledThreadPoolExecutor; public final class ProcessUtils { /* Ensure that no more than 2 uploads,processing req. are allowed */ private static final ScheduledThreadPoolExecutor threadPoolExec = new ScheduledThreadPoolExecutor( 2); public static <T> Future<T> submitTask(Runnable task, T result) { return threadPoolExec.submit(task, result); } } So how should I ensure that the user doesn't block and the stream remains accessible so that the (uploaded)file can be read from it?

  Read the article

• How do I search the MediaStore for a specific directory instead of entire external storage?

  - by Nick Lopez

  In my app I have an option that allows users to browse for audio files on their phone to add to the app. I am having trouble however with creating a faster way of processing the query code. Currently it searches the entire external storage and causes the phone to prompt a force close/wait warning. I would like to take the code I have posted below and make it more efficient by either searching in a specific folder on the phone or by streamlining the process to make the file search quicker. I am not sure how to do this however. Thanks! public class BrowseActivity extends DashboardActivity implements OnClickListener, OnItemClickListener { private List<Sound> soundsInDevice = new ArrayList<Sound>(); private List<Sound> checkedList; private ListView browsedList; private BrowserSoundAdapter adapter; private long categoryId; private Category category; private String currentCategoryName; private String description; // private Category newCategory ; private Button doneButton; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); requestWindowFeature(Window.FEATURE_NO_TITLE); setContentView(R.layout.activity_browse); checkedList = new ArrayList<Sound>(); browsedList = (ListView) findViewById(android.R.id.list); doneButton = (Button) findViewById(R.id.doneButton); soundsInDevice = getMediaSounds(); if (soundsInDevice.size() > 0) { adapter = new BrowserSoundAdapter(this, R.id.browseSoundName, soundsInDevice); } else { Toast.makeText(getApplicationContext(), getString(R.string.no_sounds_available), Toast.LENGTH_SHORT) .show(); } browsedList.setAdapter(adapter); browsedList.setOnItemClickListener(this); doneButton.setOnClickListener(this); } private List<Sound> getMediaSounds() { List<Sound> mediaSoundList = new ArrayList<Sound>(); ContentResolver cr = getContentResolver(); String[] projection = {MediaStore.Audio.Media._ID, MediaStore.Audio.Media.DISPLAY_NAME, MediaStore.Audio.Media.TITLE, MediaStore.Audio.Media.DATA, MediaStore.Audio.Media.DURATION}; final Uri uri = MediaStore.Audio.Media.EXTERNAL_CONTENT_URI; Log.v("MediaStore.Audio.Media.EXTERNAL_CONTENT_URI", "" + uri); final Cursor cursor = cr.query(uri, projection, null, null, null); int n = cursor.getCount(); Log.v("count", "" + n); if (cursor.moveToFirst()) { do { String soundName = cursor .getString(cursor .getColumnIndexOrThrow(MediaStore.Audio.Media.DISPLAY_NAME)); Log.v("soundName", "" + soundName); String title = cursor .getString(cursor .getColumnIndexOrThrow(MediaStore.Audio.Media.TITLE)); Log.v("title", "" + title); String path = cursor.getString(cursor .getColumnIndexOrThrow(MediaStore.Audio.Media.DATA)); Log.v("path", "" + path); Sound browsedSound = new Sound(title, path, false, false, false, false, 0); Log.v("browsedSound", "" + browsedSound); mediaSoundList.add(browsedSound); Log.v("mediaSoundList", "" + mediaSoundList.toString()); } while (cursor.moveToNext()); } return mediaSoundList; } public class BrowserSoundAdapter extends ArrayAdapter<Sound> { public BrowserSoundAdapter(Context context, int textViewResourceId, List<Sound> objects) { super(context, textViewResourceId, objects); } @Override public View getView(final int position, View convertView, ViewGroup parent) { ViewHolder viewHolder; View view = convertView; LayoutInflater inflater = getLayoutInflater(); if (view == null) { view = inflater.inflate(R.layout.list_item_browse, null); viewHolder = new ViewHolder(); viewHolder.soundNameTextView = (TextView) view .findViewById(R.id.browseSoundName); viewHolder.pathTextView = (TextView) view .findViewById(R.id.browseSoundPath); viewHolder.checkToAddSound = (CheckBox) view .findViewById(R.id.browse_checkbox); view.setTag(viewHolder); } else { viewHolder = (ViewHolder) view.getTag(); } final Sound sound = soundsInDevice.get(position); if (sound.isCheckedState()) { viewHolder.checkToAddSound.setChecked(true); } else { viewHolder.checkToAddSound.setChecked(false); } viewHolder.soundNameTextView.setText(sound.getName()); viewHolder.pathTextView.setText(sound.getUri()); viewHolder.checkToAddSound .setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { CheckBox cb = (CheckBox) v .findViewById(R.id.browse_checkbox); boolean checked = cb.isChecked(); boolean newValue = checked; updateView(position, newValue); doneButtonStatus(checkedList.size()); } }); return view; } } // Adapter view holder class private class ViewHolder { private TextView soundNameTextView; private TextView pathTextView; private CheckBox checkToAddSound; } // done button On Click @Override public void onClick(View view) { boolean status = getIntent().getBooleanExtra("FromAddCat", false); Log.v("for add category","enters in if"); if(status){ Log.v("for add category","enters in if1"); currentCategoryName = getIntent().getStringExtra("categoryName"); description = getIntent().getStringExtra("description"); boolean existCategory = SQLiteHelper.getCategoryStatus(currentCategoryName); if (!existCategory) { category = new Category(currentCategoryName, description, false); category.insert(); category.update(); Log.v("for add category","enters in if2"); } }else{ categoryId = getIntent().getLongExtra("categoryId",-1); category = SQLiteHelper.getCategory(categoryId); } for (Sound checkedsound : checkedList) { checkedsound.setCheckedState(false); checkedsound.insert(); category.getSounds().add(checkedsound); final Intent intent = new Intent(this, CategoriesActivity.class); finish(); startActivity(intent); } } @Override public void onItemClick(AdapterView<?> arg0, View view, int position, long arg3) { boolean checked = true; boolean newValue = false; CheckBox cb = (CheckBox) view.findViewById(R.id.browse_checkbox); if (cb.isChecked()) { cb.setChecked(!checked); newValue = !checked; } else { cb.setChecked(checked); newValue = checked; } updateView(position, newValue); doneButtonStatus(checkedList.size()); } private void doneButtonStatus(int size) { if (size > 0) { doneButton.setEnabled(true); doneButton.setBackgroundResource(R.drawable.done_button_drawable); } else { doneButton.setEnabled(false); doneButton.setBackgroundResource(R.drawable.done_btn_disabled); } } private void updateView(int index, boolean newValue) { System.out.println(newValue); Sound sound = soundsInDevice.get(index); if (newValue == true) { checkedList.add(sound); sound.setCheckedState(newValue); } else { checkedList.remove(sound); sound.setCheckedState(newValue); } } }

  Read the article

• Talend Enterprise Data Integration overperforms on Oracle SPARC T4

  - by Amir Javanshir

  The SPARC T microprocessor, released in 2005 by Sun Microsystems, and now continued at Oracle, has a good track record in parallel execution and multi-threaded performance. However it was less suited for pure single-threaded workloads. The new SPARC T4 processor is now filling that gap by offering a 5x better single-thread performance over previous generations. Following our long-term relationship with Talend, a fast growing ISV positioned by Gartner in the “Visionaries” quadrant of the “Magic Quadrant for Data Integration Tools”, we decided to test some of their integration components with the T4 chip, more precisely on a T4-1 system, in order to verify first hand if this new processor stands up to its promises. Several tests were performed, mainly focused on: Single-thread performance of the new SPARC T4 processor compared to an older SPARC T2+ processor Overall throughput of the SPARC T4-1 server using multiple threads The tests consisted in reading large amounts of data --ten's of gigabytes--, processing and writing them back to a file or an Oracle 11gR2 database table. They are CPU, memory and IO bound tests. Given the main focus of this project --CPU performance--, bottlenecks were removed as much as possible on the memory and IO sub-systems. When possible, the data to process was put into the ZFS filesystem cache, for instance. Also, two external storage devices were directly attached to the servers under test, each one divided in two ZFS pools for read and write operations. Multi-thread: Testing throughput on the Oracle T4-1 The tests were performed with different number of simultaneous threads (1, 2, 4, 8, 12, 16, 32, 48 and 64) and using different storage devices: Flash, Fibre Channel storage, two stripped internal disks and one single internal disk. All storage devices used ZFS as filesystem and volume management. Each thread read a dedicated 1GB-large file containing 12.5M lines with the following structure: customerID;FirstName;LastName;StreetAddress;City;State;Zip;Cust_Status;Since_DT;Status_DT 1;Ronald;Reagan;South Highway;Santa Fe;Montana;98756;A;04-06-2006;09-08-2008 2;Theodore;Roosevelt;Timberlane Drive;Columbus;Louisiana;75677;A;10-05-2009;27-05-2008 3;Andrew;Madison;S Rustle St;Santa Fe;Arkansas;75677;A;29-04-2005;09-02-2008 4;Dwight;Adams;South Roosevelt Drive;Baton Rouge;Vermont;75677;A;15-02-2004;26-01-2007 […] The following graphs present the results of our tests: Unsurprisingly up to 16 threads, all files fit in the ZFS cache a.k.a L2ARC : once the cache is hot there is no performance difference depending on the underlying storage. From 16 threads upwards however, it is clear that IO becomes a bottleneck, having a good IO subsystem is thus key. Single-disk performance collapses whereas the Sun F5100 and ST6180 arrays allow the T4-1 to scale quite seamlessly. From 32 to 64 threads, the performance is almost constant with just a slow decline. For the database load tests, only the best IO configuration --using external storage devices-- were used, hosting the Oracle table spaces and redo log files. Using the Sun Storage F5100 array allows the T4-1 server to scale up to 48 parallel JVM processes before saturating the CPU. The final result is a staggering 646K lines per second insertion in an Oracle table using 48 parallel threads. Single-thread: Testing the single thread performance Seven different tests were performed on both servers. Given the fact that only one thread, thus one file was read, no IO bottleneck was involved, all data being served from the ZFS cache. Read File ? Filter ? Write File: Read file, filter data, write the filtered data in a new file. The filter is set on the “Status” column: only lines with status set to “A” are selected. This limits each output file to about 500 MB. Read File ? Load Database Table: Read file, insert into a single Oracle table. Average: Read file, compute the average of a numeric column, write the result in a new file. Division & Square Root: Read file, perform a division and square root on a numeric column, write the result data in a new file. Oracle DB Dump: Dump the content of an Oracle table (12.5M rows) into a CSV file. Transform: Read file, transform, write the result data in a new file. The transformations applied are: set the address column to upper case and add an extra column at the end, which is the concatenation of two columns. Sort: Read file, sort a numeric and alpha numeric column, write the result data in a new file. The following table and graph present the final results of the tests: Throughput unit is thousand lines per second processed (K lines/second). Improvement is the % of improvement between the T5140 and T4-1. Test T4-1 (Time s.) T5140 (Time s.) Improvement T4-1 (Throughput) T5140 (Throughput) Read/Filter/Write 125 806 645% 100 16 Read/Load Database 195 1111 570% 64 11 Average 96 557 580% 130 22 Division & Square Root 161 1054 655% 78 12 Oracle DB Dump 164 945 576% 76 13 Transform 159 1124 707% 79 11 Sort 251 1336 532% 50 9 The improvement of single-thread performance is quite dramatic: depending on the tests, the T4 is between 5.4 to 7 times faster than the T2+. It seems clear that the SPARC T4 processor has gone a long way filling the gap in single-thread performance, without sacrifying the multi-threaded capability as it still shows a very impressive scaling on heavy-duty multi-threaded jobs. Finally, as always at Oracle ISV Engineering, we are happy to help our ISV partners test their own applications on our platforms, so don't hesitate to contact us and let's see what the SPARC T4-based systems can do for your application! "As describe in this benchmark, Talend Enterprise Data Integration has overperformed on T4. I was generally happy to see that the T4 gave scaling opportunities for many scenarios like complex aggregations. Row by row insertion in Oracle DB is faster with more than 650,000 rows per seconds without using any bulk Oracle capabilities !" Cedric Carbone, Talend CTO.

  Read the article

• .NET 4: &ldquo;Slim&rdquo;-style performance boost!

  - by Vitus

  RTM version of .NET 4 and Visual Studio 2010 is available, and now we can do some test with it. Parallel Extensions is one of the most valuable part of .NET 4.0. It’s a set of good tools for easily consuming multicore hardware power. And it also contains some “upgraded” sync primitives – Slim-version. For example, it include updated variant of widely known ManualResetEvent. For people, who don’t know about it: you can sync concurrency execution of some pieces of code with this sync primitive. Instance of ManualResetEvent can be in 2 states: signaled and non-signaled. Transition between it possible by Set() and Reset() methods call. Some shortly explanation: Thread 1 Thread 2 Time mre.Reset(); mre.WaitOne(); //code execution 0 //wating //code execution 1 //wating //code execution 2 //wating //code execution 3 //wating mre.Set(); 4 //code execution //… 5 Upgraded version of this primitive is ManualResetEventSlim. The idea in decreasing performance cost in case, when only 1 thread use it. Main concept in the “hybrid sync schema”, which can be done as following:   internal sealed class SimpleHybridLock : IDisposable { private Int32 m_waiters = 0; private AutoResetEvent m_waiterLock = new AutoResetEvent(false);   public void Enter() { if (Interlocked.Increment(ref m_waiters) == 1) return; m_waiterLock.WaitOne(); }   public void Leave() { if (Interlocked.Decrement(ref m_waiters) == 0) return; m_waiterLock.Set(); }   public void Dispose() { m_waiterLock.Dispose(); } } It’s a sample from Jeffry Richter’s book “CLR via C#”, 3rd edition. Primitive SimpleHybridLock have two public methods: Enter() and Leave(). You can put your concurrency-critical code between calls of these methods, and it would executed in only one thread at the moment. Code is really simple: first thread, called Enter(), increase counter. Second thread also increase counter, and suspend while m_waiterLock is not signaled. So, if we don’t have concurrent access to our lock, “heavy” methods WaitOne() and Set() will not called. It’s can give some performance bonus. ManualResetEvent use the similar idea. Of course, it have more “smart” technics inside, like a checking of recursive calls, and so on. I want to know a real difference between classic ManualResetEvent realization, and new –Slim. I wrote a simple “benchmark”: class Program { static void Main(string[] args) { ManualResetEventSlim mres = new ManualResetEventSlim(false); ManualResetEventSlim mres2 = new ManualResetEventSlim(false);   ManualResetEvent mre = new ManualResetEvent(false);   long total = 0; int COUNT = 50;   for (int i = 0; i < COUNT; i++) { mres2.Reset(); Stopwatch sw = Stopwatch.StartNew();   ThreadPool.QueueUserWorkItem((obj) => { //Method(mres, true); Method2(mre, true); mres2.Set(); }); //Method(mres, false); Method2(mre, false);   mres2.Wait(); sw.Stop();   Console.WriteLine("Pass {0}: {1} ms", i, sw.ElapsedMilliseconds); total += sw.ElapsedMilliseconds; }   Console.WriteLine(); Console.WriteLine("==============================="); Console.WriteLine("Done in average=" + total / (double)COUNT); Console.ReadLine(); }   private static void Method(ManualResetEventSlim mre, bool value) { for (int i = 0; i < 9000000; i++) { if (value) { mre.Set(); } else { mre.Reset(); } } }   private static void Method2(ManualResetEvent mre, bool value) { for (int i = 0; i < 9000000; i++) { if (value) { mre.Set(); } else { mre.Reset(); } } } } I use 2 concurrent thread (the main thread and one from thread pool) for setting and resetting ManualResetEvents, and try to run test COUNT times, and calculate average execution time. Here is the results (I get it on my dual core notebook with T7250 CPU and Windows 7 x64): ManualResetEvent ManualResetEventSlim Difference is obvious and serious – in 10 times! So, I think preferable way is using ManualResetEventSlim, because not always on calling Set() and Reset() will be called “heavy” methods for working with Windows kernel-mode objects. It’s a small and nice improvement! ;)

  Read the article

• Hibernate Exception, what wrong ? [[Exception in thread "main" org.hibernate.InvalidMappingException

  - by user195970

  I use netbean 6.7.1 to write "hello world" witch hibernate, but I get some errors, plz help me, thank you very much. my exception init: deps-module-jar: deps-ear-jar: deps-jar: Copying 1 file to F:\Documents and Settings\My Dropbox\DropboxNetBeanProjects\loginspring\build\web\WEB-INF\classes compile-single: run-main: Oct 25, 2009 2:44:05 AM org.hibernate.cfg.Environment <clinit> INFO: Hibernate 3.2.5 Oct 25, 2009 2:44:05 AM org.hibernate.cfg.Environment <clinit> INFO: hibernate.properties not found Oct 25, 2009 2:44:05 AM org.hibernate.cfg.Environment buildBytecodeProvider INFO: Bytecode provider name : cglib Oct 25, 2009 2:44:05 AM org.hibernate.cfg.Environment <clinit> INFO: using JDK 1.4 java.sql.Timestamp handling Oct 25, 2009 2:44:05 AM org.hibernate.cfg.Configuration configure INFO: configuring from resource: /hibernate.cfg.xml Oct 25, 2009 2:44:05 AM org.hibernate.cfg.Configuration getConfigurationInputStream INFO: Configuration resource: /hibernate.cfg.xml Oct 25, 2009 2:44:06 AM org.hibernate.cfg.Configuration addResource INFO: Reading mappings from resource : hibernate/Tbluser.hbm.xml Oct 25, 2009 2:44:06 AM org.hibernate.util.XMLHelper$ErrorLogger error SEVERE: Error parsing XML: XML InputStream(1) Document is invalid: no grammar found. Oct 25, 2009 2:44:06 AM org.hibernate.util.XMLHelper$ErrorLogger error SEVERE: Error parsing XML: XML InputStream(1) Document root element "hibernate-mapping", must match DOCTYPE root "null". Exception in thread "main" org.hibernate.InvalidMappingException: Could not parse mapping document from resource hibernate/Tbluser.hbm.xml at org.hibernate.cfg.Configuration.addResource(Configuration.java:569) at org.hibernate.cfg.Configuration.parseMappingElement(Configuration.java:1587) at org.hibernate.cfg.Configuration.parseSessionFactory(Configuration.java:1555) at org.hibernate.cfg.Configuration.doConfigure(Configuration.java:1534) at org.hibernate.cfg.Configuration.doConfigure(Configuration.java:1508) at org.hibernate.cfg.Configuration.configure(Configuration.java:1428) at org.hibernate.cfg.Configuration.configure(Configuration.java:1414) at hibernate.CreateTest.main(CreateTest.java:22) Caused by: org.hibernate.InvalidMappingException: Could not parse mapping document from invalid mapping at org.hibernate.cfg.Configuration.addInputStream(Configuration.java:502) at org.hibernate.cfg.Configuration.addResource(Configuration.java:566) ... 7 more Caused by: org.xml.sax.SAXParseException: Document is invalid: no grammar found. at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:195) at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(ErrorHandlerWrapper.java:131) at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:384) at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:318) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(XMLNSDocumentScannerImpl.java:250) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl$NSContentDriver.scanRootElementHook(XMLNSDocumentScannerImpl.java:626) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:3095) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$PrologDriver.next(XMLDocumentScannerImpl.java:921) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScannerImpl.java:140) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205) at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522) at org.dom4j.io.SAXReader.read(SAXReader.java:465) at org.hibernate.cfg.Configuration.addInputStream(Configuration.java:499) ... 8 more Java Result: 1 BUILD SUCCESSFUL (total time: 1 second) hibernate.cfg.xml <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE hibernate-configuration PUBLIC "-//Hibernate/Hibernate Configuration DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd"> <hibernate-configuration> <session-factory> <property name="hibernate.dialect">org.hibernate.dialect.MySQLDialect</property> <property name="hibernate.connection.driver_class">com.mysql.jdbc.Driver</property> <property name="hibernate.connection.url">jdbc:mysql://localhost:3306/hibernate</property> <property name="hibernate.connection.username">root</property> </session-factory> </hibernate-configuration> Tbluser.hbm.xml <?xml version="1.0"?> <!DOCTYPE hibernate-mapping PUBLIC "-//Hibernate/Hibernate Mapping DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-mapping-3.0.dtd"> <!-- Generated Oct 25, 2009 2:37:30 AM by Hibernate Tools 3.2.1.GA --> <hibernate-mapping> <class name="hibernate.Tbluser" table="tbluser" catalog="hibernate"> <id name="userId" type="java.lang.Integer"> <column name="userID" /> <generator class="identity" /> </id> <property name="username" type="string"> <column name="username" length="50" /> </property> <property name="password" type="string"> <column name="password" length="50" /> </property> <property name="email" type="string"> <column name="email" length="50" /> </property> <property name="phone" type="string"> <column name="phone" length="50" /> </property> <property name="groupId" type="java.lang.Integer"> <column name="groupID" /> </property> </class> </hibernate-mapping> Tbluser.java package hibernate; // Generated Oct 25, 2009 2:37:30 AM by Hibernate Tools 3.2.1.GA /** * Tbluser generated by hbm2java */ public class Tbluser implements java.io.Serializable { private Integer userId; private String username; private String password; private String email; private String phone; private Integer groupId; public Tbluser() { } public Tbluser(String username, String password, String email, String phone, Integer groupId) { this.username = username; this.password = password; this.email = email; this.phone = phone; this.groupId = groupId; } public Integer getUserId() { return this.userId; } public void setUserId(Integer userId) { this.userId = userId; } public String getUsername() { return this.username; } public void setUsername(String username) { this.username = username; } public String getPassword() { return this.password; } public void setPassword(String password) { this.password = password; } public String getEmail() { return this.email; } public void setEmail(String email) { this.email = email; } public String getPhone() { return this.phone; } public void setPhone(String phone) { this.phone = phone; } public Integer getGroupId() { return this.groupId; } public void setGroupId(Integer groupId) { this.groupId = groupId; } }

  Read the article

• How do I parse a UTC date format string to local date time?

  - by Brian Scott

  I'm currently using the jQuery fullcalendar plugin but I've came across an issue regarding daylight savings time in Britain. After the daylight savings take effect the hours are being displayed an hour out of phase. The problem appears to be with the plugins parsing function. Can someone please provide me with the funciton to parse a UTC string which includes the 'Z' demonination into a local date time for display?

  Read the article

• is there any way to enforce the 30 seconds limit on local appengine dev server?

  - by Alon Carmel

  Hey, i was wondering if there is a way to enforce the 30 seconds limit that is being enforced online at the appengine production servers to the local dev server? its impossible to test if i reach the limit before going production. maybe some django middlware?

  Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >