Search Results

Search found 971 results on 39 pages for 'disconnect'.

Page 2/39 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Automatically connect to VPN when initiating RDP Remote Desktop connection and then disconnect VPN when done

    - by Josh Newman
    I know I can create a batch file to initiate a VPN connection followed by an RDP session, however I want to know if it's possible (in Windows 7 and ideally Windows XP as well) to have the VPN connection tied to the RDP session status. Scenario: user has to VPN first in order to be able to RDP. Ideally user would click one icon (batch file?) to initiate VPN connection and load RDP session. When they close the RDP session I want the VPN to then automatically disconnect so they don't accidentally route their subsequent non-RDP browsing + Internet activity through the VPN.

    Read the article

  • Windows Explorer slow response when disconnect from the network

    - by ITGuy24
    As a Systems Admin I have seen this issue repeatedly and it drives me crazy. Basically the problem occurs when you open My Documents or My Computer (Windows Explorer) there is a big delay ranging from 5-25 seconds before it actually opens and shows the content. Sometimes the problem continues with each subfolder you open. The problem is most common when disconnected from the network and when you have mapped drives. The most common solution for this problem is to disconnect any mapped drives or printers that are discconected/not reaachable. I have also heard that turning off "Automatically search for network folders and printers" can solve this issue but I have yet to see this work. Does anyone know of any other work arounds for this?

    Read the article

  • Windows 7 unload driver/disconnect usb before restart

    - by brux
    In xp, my Tascam US 122 usb audio interface works fine. On my windows 7 computer the device works, however when i restart/shutdown it hangs at the "shutting down" screen forever. If the usb cable is removed prior to initiating restart/shutdown then everything goes fine, the computer restarts as normal. This is a known problem, running any other driver in compatibility mode doesnt fix the problem. Is there a method I can use to unload the device/drivers so that I dont have to reach round physically and disconnect the cable. Somebody suggested a spdt switch on the cable itself, but I am looking for a simpler method. Surely I can automate the unloading of the device through a script or such? Any ideas are greatly welcomed thanks

    Read the article

  • Launch script after SFTP disconnect

    - by Mates
    I'm currently using Caja (basically the same as Nautilus) to connect using SSH to my server and work with files. What I'm looking for is a way to launch a simple script when I disconnect - I can launch a script after disconnecting from the TTY by putting it into ~/.bash_logout file, but that is not executed when disconnecting from a file manager. The only idea I have is to set up a cronjob which would be checking for existing sftp-server or sshd processes periodicaly and launched the script when there's no such process running. Is there any easier way to do this?

    Read the article

  • Chrome sending of packets to random destinations upon reconnect/disconnect

    - by f0x
    Noticed an interesting thing whilst debugging one of my websocket applications that Google Chrome will push out 3 http requests upon a network connection status changing; Quite disconcerting and looks almost as if some malware is checking out to a random server. I don't quite understand the why though since they all return a 502 or have no response code at all since the destination does not exist. On Disconnect: Reconnect: I guess the main question is this normal and what the use is; howcome they wouldn't go for a dns lookup that actually exists?

    Read the article

  • all USB "randomly" disconnect and reconnect

    - by teuneboon
    I'm having a weird issue currently: at seemingly random times(although it seems to happen mostly when USB is used a lot, ie downloading + uploading over my WiFi stick or viewing an HD video from my external hard-drive) all my USB devices disconnect and reconnect after a few seconds. This wouldn't be a HUGE problem if I didn't have to rely on my USB for my internet, because now every time this happens my internet, and with it stuff like remote desktop, crashes. I'm running Windows 8 Pro 64 bit with a Gigabyte 990FXA-D3 motherboard. Now the weird thing: I had the same problem with my previous pc, which had a different motherboard(I think it was an Asus M4A785TD-V EVO). I googled a bit and didn't really find anything about this, only found out I could check if something shows up in the Event Viewer, and I get this error there when the USB crashes: "A timeout occurred while waiting for the EHCI host controller Interrupt on Async Advance Doorbell response." If you require any extra information I'm happy to provide it.

    Read the article

  • How to force disconnect users from a box?

    - by LikeToCode
    how do you disconnect an active user logged in to a box? There should be a command line tool that comes with Windows, but I forgot it's name. It lists all the users logged in to a box and you can force disconnect of some, because, for example, you want to Remote Desktop to it and there's too many users.

    Read the article

  • Wireless disconnect randomly with wpa_supplicant reason=2

    - by renenglish
    I installed ubuntu-server 12.04 on my PC , and I use an usb wireless card to join the network. It works ok when I boot up my PC , but the wireless disconnects after a while. I pkill wpa_supplicant and reload the driver rtl8192cu , then it works a again. Then it disconnect again after about a random minutes. Here is the syslog: 22384 May 29 21:49:27 homecenter kernel: [ 6450.459313] wlan1: authenticated 22385 May 29 21:49:27 homecenter kernel: [ 6450.459535] wlan1: associate with f4:ec:38:45:62:74 (try 1) 22386 May 29 21:49:27 homecenter kernel: [ 6450.469080] wlan1: RX AssocResp from f4:ec:38:45:62:74 (capab=0 x431 status=0 aid=3) 22387 May 29 21:49:27 homecenter kernel: [ 6450.469085] wlan1: associated 22388 May 29 21:49:27 homecenter wpa_supplicant[2342]: Associated with f4:ec:38:45:62:74 22389 May 29 21:49:27 homecenter kernel: [ 6450.481933] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready 22390 May 29 21:49:27 homecenter wpa_supplicant[2342]: WPA: Key negotiation completed with f4:ec:38:45:62:7 4 [PTK=CCMP GTK=CCMP] 22391 May 29 21:49:27 homecenter wpa_supplicant[2342]: CTRL-EVENT-CONNECTED - Connection to f4:ec:38:45:62: 74 completed (auth) [id=0 id_str=] 22392 May 29 21:49:38 homecenter kernel: [ 6461.472014] wlan1: no IPv6 routers present 22393 May 29 21:49:38 homecenter ntpdate[2263]: step time server 91.189.94.4 offset 0.012758 sec 22394 May 29 21:49:51 homecenter ntpdate[2404]: step time server 91.189.94.4 offset -0.001190 sec 22395 May 29 21:54:38 homecenter kernel: [ 6762.052030] wlan1: deauthenticated from f4:ec:38:45:62:74 (Reas on: 2) 22396 May 29 21:54:38 homecenter wpa_supplicant[2342]: CTRL-EVENT-DISCONNECTED bssid=f4:ec:38:45:62:74 reas on=2 22397 May 29 21:54:38 homecenter kernel: [ 6762.064744] cfg80211: All devices are disconnected, going to re store regulatory settings 22398 May 29 21:54:38 homecenter kernel: [ 6762.064752] cfg80211: Restoring regulatory settings 22399 May 29 21:54:38 homecenter kernel: [ 6762.064757] cfg80211: Calling CRDA to update world regulatory d omain 22400 May 29 21:54:38 homecenter kernel: [ 6762.069938] cfg80211: Ignoring regulatory request Set by core s ince the driver uses its own custom regulatory domain 22401 May 29 21:54:38 homecenter kernel: [ 6762.069943] cfg80211: World regulatory domain updated: 22402 May 29 21:54:38 homecenter kernel: [ 6762.069945] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 22403 May 29 21:54:38 homecenter kernel: [ 6762.069949] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22404 May 29 21:54:38 homecenter kernel: [ 6762.069952] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22405 May 29 21:54:38 homecenter kernel: [ 6762.069956] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22406 May 29 21:54:38 homecenter kernel: [ 6762.069959] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22407 May 29 21:54:38 homecenter kernel: [ 6762.069962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KH z), (300 mBi, 2000 mBm)

    Read the article

  • Problem with Qt::QueuedConnection, signal delivered after disconnect

    - by lutku
    Hi, I just discovered interesting behavior of queued connection in Qt 4.6: First queued connection is made: connect(someSender, SIGNAL(completed()), this, SLOT(handleCompletion()), Qt::QueuedConnection) Then someSender sends the signal: emit completed() Before receiving signal (as it is in queue), I disconnect from the signal: disconnect(someSender, SIGNAL(completed()), this, SLOT(handleCompletion()) Still, handleCompletion slot is invoked at next eventloop iteration. I can prevent this from happening by using someSender-blockSignals(true) at correct point, but it feels awful not to mention having some boolean flag to disable slot's functionality. Especially, I feel amazed that this behavior is not mentioned in Qt documentation (at least I haven't found). Finally the question: any sensible way to avoid this from happening?

    Read the article

  • Windows xp mapped drives disconnect from Windows 7 on Peer to Peer network

    - by Kathryn Codo
    I have a 5 user peer to peer network. 2-XP machines, 3- Windows 7 machines and a Windows 7 machine acting as the file server. I have NO issues with the Windows 7 machines staying connected via the mapped drives to the "server". However, once a day the 2 XP machines will not connect to the Windows 7 machine "server" via the mapped drives. I must restart the "server" in order to see the server and access the files via the mapped drives or Explorer. I have tried the persistent : yes command in NET USE, on the XP machines and also setting a static IP address on the "server". I've turned the firewall off on the "server:, no difference so I turned the firewall back on. No interruption occurs with the internet when this happens, just can't see the server. Again, the Windows 7 users are unaffected. I have gone into the advanced network settings on the "server" and added read/write permissions for Everyone as well as the users of the XP machines. I have double checked that we are all on the same WORKGROUP. I'm at a loss. It seems to happen around mid-day and I've not been able to find any activity that is happening at this time (Like someone plugging in a thumbdrive). Any suggestions would be greatly appreciated as my client is running old XP software he no longer has the disks for and needs for his engineering firm.

    Read the article

  • Ubuntu Server 10.04 Heavy Network Traffic causes disconnect

    - by K Vaughan
    I'm currently running a headless Ubuntu 10.04 server. Installed is the LAMP stack, Joomla, Virtualbox, phpvirtualbox, webmin and proFTP.. It resolves the IP address so I can access it remotely (either the apache2 webserver or the FTP) using DDClient. Any packages installed have been installed using apt-get. Webmin, although discouraged in Ubuntu Server, is used mostly to administer the webserver aspect. This issue also appeared when I was using Ubuntu Server 10.10. After periods of heavy network traffic, whether local or remote, the connect drops. I'm talking specifically about the transfer of files via FTP, SCP or Samba (the latter of which I seldom use). There is no response to ping or ssh. I can't FTP to the server nor can I load the website. There are times when the server has been on for a few days and everything runs fine because I haven't accessed it much, if at all (thus not much network traffic). I've gone through a few hardware changes although I don't believe this has cause the issue: this has been happening long before I made any changes. At first I thought it was my ISP-provided router blocking traffic because of some kind of misconfiguration (perhaps assuming it was some kind of DoS attack). I've changed routers and still found no success. I've checked syslog, dmesg and kern.log for warnings but have uncovered none. I've ran memtest via the GRUB2 menu at boot and once it turned up 4 errors. I ran again with individual sticks of RAM in various slots and everything turned up fine. I've looked through the BIOS settings and everything looks fine. I've tried unplugging unnecessary pieces of hardware (other internal hard drives, CD drives, floppy, PCI cards, etc). Any help or tips on how I can even begin to troubleshoot this would be very much appreciated. Please note that i've only started playing with servers as a hobby so my knowledge wouldn't be the most refined. I'm comfortable with command line and have the initiative to know how to look up something I can't do. Unfortunately I can't seem to find any issues like this. Additionally: If a solution can't be found some assistance to write a script that will cause the server to reboot automatically if, after x minutes, it gets no response to pinging somewhere like google. Admittedly that's not the cleanest solution should my internet end up going down but I can't think of what else to do.

    Read the article

  • CELLPHONE's wifi makes my wireless router disconnect Plz Help me

    - by wifiprobodude
    Hey guys i have a problem. For 7 months now, i have been dealing with internet problems. But i finally found out why my wireless router has been disconnecting randomly. Everytime I enable wifi on my cellphone, my whole router disconnects and lose internet untill i swtich the wifi off on my phone. I dont understand why this is doing this Can anyone help has this happend to you? htc android-wifi everyday-problems And Just to findout it happens with all wifi devices?

    Read the article

  • Disconnect from PHP after output generated

    - by Oli
    I have a LEMP stack. Nginx sitting in front of PHP-FPM. Because some of the sites are heavy and there's OPCode caching, PHP is set up so that there are only 5 child processes running. The aim being that each child can deal with any request in less than half-a-second and then move onto the next request. One problem I've found is that if it's a big chunk of HTML that's getting sent out, and the user has a slow connection, that PHP thread stays occupied until they've finished downloading. Because of my current setup, I have a pretty unforgiving timeout inside PHP where the script is killed after 20 seconds. This is to make sure everybody gets a turn but on a slow connection, this can mean the user gets cut off with a 504 Gateway timeout. I was wondering if there was some sort of buffer solution that I could implement within or just behind Nginx that sent the request through and then... well... buffered the content into its own cache and feed that onto the client as and when they could download it. The aim being that the underlying PHP thread can be freed up. What I'm asking for doesn't have to be PHP-specific. Anything that deals with FastCGI, or even any Nginx-upstream might have a similar issue to this.

    Read the article

  • ssh sessions in xterms freeze for many minutes whenever they disconnect

    - by dreeves
    If I ssh to a remote machine and then lose internet connectivity, the session freezes. I can't control-c or otherwise abort and go back to my local xterm or terminal prompt but if I wait several minutes it will do so. There must be some way to force it to abort the remote ssh session when connectivity is lost. I'm on a Mac but I believe this happens on cygwin or linux as well.

    Read the article

  • Linux wireless disconnect every 20 minutes

    - by james
    My laptop uses CentOS 6.3 with kernel 2.6.32-279.el6.x86_64. My wireless adaptor is Intel Corporation Centrino Wireless-N 1000. My wireless connection always get off after about 20 minutes. The network applet shows the connection is still on with good signal strength, but I just cannot load any web pages even the configuration page of the wireless router. The problem will continue until I disable and reconnect the wireless. Other devices like my cell phone uses the same wireless network without the problem. Even yesterday I'm using the same laptop with Fedora 17 without this problem. I also searched the internet and someone said running services NetworkManager and network simultaneously may be a problem. But I cannot stop any one of them because: if I stop network and start NetworkManager, the network service will start automatically; if I stop NetworkManager and run network, it says "Device does not seem to be present, delaying initialization." when trying to bringing on the wireless. What shall I do to get rid of the problem? Thank you very much!

    Read the article

  • How to show disconnect network drives

    - by Jake
    Windows 7 and Vista laptops in my company domain has network drives set up by Win2k8 Server GPO. Normally, when the laptops has ethernet cable plugged in before boot, the network drives connect and appear as expected at the end of startup sequence. However, when the laptop has ethernet cable unplugged, the network drives are not connected, which is fine, but the disconnected icons disappear as well. i.e. the drives are not set up. At the end of the startup sequence, upon reaching desktop, the wireless adapters will connect to the network and the laptop will be able to find the network drive. Hence I want the drives to be setup nonetheless, so that the next attempt to connect, say, via a desktop shortcut, will reestablish the network drive connection. How can this be done?

    Read the article

  • Uploading with browser makes all other browser tabs and devices disconnect

    - by fabsenet
    Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

    Read the article

  • Kill ssh background process after disconnect / timeout?

    - by keflavich
    I frequently use ssh tunnels to access VNC sessions on remote machines, but this is on my laptop so the connections break when I put it to sleep for the night. If I then try to re-open the connection in the morning, I have to manually kill the ssh session, otherwise I get this error: bind: Address already in use channel_setup_fwd_listener: cannot listen to port: 1202 Could not request local forwarding. The SSH command I'm using is this: ssh -N -C -f -L 1202:localhost:5900 name@server What's the best way to have the ssh tunnel die when it disconnects? Or reset?

    Read the article

  • lenovo x1 carbon windows 8 frequent wifi disconnect issue

    - by hIpPy
    I'm having frequent wifi disconnects on my Lenovo X1 Carbon Touch laptop. I got this laptop 2 months back and it has been happening ever since about 3-5 times a day and 10 times a week on average. I've Frontier Fios internet. Power connected or not does not matter. Once I get disconnected, I try below to connect again in that order: turn Airplane mode on and off, troubleshoot network problems windows troubleshooter), restart the laptop I'd find that the WiFi adapter would get disabled and sometimes windows troubleshooting would help but more than often I'd end up restarting the laptop. A week back, I upgraded my wifi network adapter drivers (now Intel, version 15.5.6.48, 10/3/2012). I still get disconnected frequently but turning Airplane mode on and off gets me connected again. So the driver update did help. Windows 8 is updated. None of the other devices (nexus, iphone phones, nexus7, ipad tablets) would have wifi issues when my laptop would get disconnected. config: Intel(R) Centrino(R) Advanced-N 6205 (WiFi network adapter) Microsoft Windows 8 Pro Microsoft Windows [Version 6.2.9200] x64-based PC LENOVO System Model: 3443CTO X1 Carbon Touch I recently noticed this log message When I got disconnected in event viewer: Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x[XXXXXXXXXXXX]. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server. Any idea?

    Read the article

  • Uploading to YouTube makes all browser tabs and devices disconnect

    - by fabsenet
    Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

    Read the article

  • Disconnect from Ubuntu remote server

    - by user43101
    I remote access to my server install LAMP and in the middle of the installation it disconnected. and from then i cannot a remote to that server and giving the error "Cannot connect to VNC server error 60001" Please help give some suggestion.....with the problem above

    Read the article

  • is there a way to disconnect from facebook login without calling logout

    - by Joey
    Basically, I'd like to know how I can logout of my facebook session if I am in an iphone app and have connected to facebook (such that I do not have to repeatedly enter my login/password). Normally you'd disconnect in the app somewhere like in the options, but if this is not available (i.e. anything that triggers the FBSession logout method) is there some other way to do it? I'm guessing one could restore their phone to factory settings or something.

    Read the article

  • FTP Upload multiple files without disconnect using .NET

    - by DK39
    I'm uploading multiple files using FtpWebRequest. But for every file I'm opening and closing a connection. How can I upload multiple files using the same connection? Like a ftp client application, connect using username and password, change directory, upload file1, upload file2, upload file3, disconnect.

    Read the article

  • Change Message on Sony Reader to “Do not disconnect”

    - by Martin Broerse
    When I connect a Sony Reader to an USB port “USB connected” is shown on the Reader. When the Sony “Reader Library” software is started this message changes to “Do not disconnect”. I want to implement this in a software tool to. There seems to be no file locked. Perhaps it is done via ebookUsb.dll. Does anybody know how this is done from any programming language? I like to see an example.

    Read the article

  • how to detect datacard connect and disconnect event on win32

    - by Vinayaka Karjigi
    Hi All, I have a data card, as soon as i insert the data card, i am getting the events by using wm_device_change event. But I also want to get event, when my data connect actually connects to out side world. I mean to say, as soon as we click on connect/disconnect button of data card,i want to get the event. exactly speaking wanted to know, when connection is established and disconnected. data card is vodaphone data card and i am trying to browse using that data card. what ever is the SDK, somewhere the OS should get the event of connection and disconnection to network is there any way to access that event which OS is getting. as i can see in notificaiton the changes of vodaphone connection and LAN connection data card is a USB device having SIM within it, and can be used to access internet through GPRS. can i know how to do this in win32 c/c++ programe. with regards Vinayaka Karjigi

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >