Search Results

Search found 14435 results on 578 pages for 'disk usage'.

Page 2/578 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • SMART says disk failure is imminent due to bad blocks, what do I need to do?

    - by flix
    I have on my hard drive 2 OSes: Ubuntu 12.04 and Windows Vista (I keep it just because of school). Everything was OK on both OSes, but one day on Ubuntu I was getting awkward noises from my notebooks' hard drive and then everything stopped and I couldn't do anything. On Windows everything was OK. Every time I boot Ubuntu I can get 5 minutes normal run time, without problems. After that the hard drive sounds crazy and nothing works. I could run S.M.A.R.T tests from a older Ubuntu CD (10.04) from the GUI (Disk Utility, or something like that and from terminal). From the GUI, I got that the DISK FAILURE IS IMMINENT and I have ~700 bad blocks (or broken blocks, I had that test I while ago) on my HDD. From the terminal (I don't remember if it was fsck or a SMART test command) I got that the HDD will fail in under 24 hours. Since then it passed 2-3 weeks. I've tried "badblocks" but after 10 hours it was still running and I had to stop it. Now I have to use cygwin and other alternatives for my Linux apps on Windows. How can I separate the bad blocks from Ubuntu so it wouldn't use them? Please help.

    Read the article

  • Retrieving virtual disk file name from disk number

    - by Josip Medved
    When I list virtual disks within diskpart: DISKPART> list vdisk VDisk ### Disk ### State Type File --------- -------- -------------------- --------- ---- VDisk 0 Disk 2 Attached not open Fixed C:\Disk.vhd Interesting part for me here is file name. I tried to find equivalent of function that would give me file name (under File column) if I know disk number. Any idea which function that might be?

    Read the article

  • DPM 2010 "Disk failed or disk not found"

    - by SysAdmin
    I have an HP Proliant ML110 G5 server with Windows server 2008R2 only dedicated for DPM 2010. This server has a limit in HD of 8TB which has already been met. I'm now stuck in this situation where my disk keeps failing "Disk failed or Disk not found" in the disk management. Only after I reboot the system the disk comes back up. Today I was running my monthly tape backup on a certain protection group and the disk failed again while the tape job was running (so the job wasn't completed). This is the description of the error in the alerts: "The disk Disk 1 - Hitachi HDS722020ALA330 SCSI Disk Device cannot be detected or has stopped responding. All subsequent protection activities that use this disk will fail until the disk is brought back online. (ID 3120)". My backup system is becoming useless! I don't think that is a hardware issue (please correct me if I'm wrong) since the HD works fine for a certain period of time which is becoming shorter and shorter. I basically have no more option to fix this problem. I tried to fix any error that was coming up in the event viewer with no luck (included one regarding the SQL2008 compatibility issue). The disk keeps failing! Now I'm only trying to recover/migrate the data from the disk that is having problem but my issue now is that I cannot add any drives to my server since I already got installed the maximum storage capacity 8TB. I thought about 2 simple options. Please tell me what you guys think about it; Unplug one of the 2 storage pool disks (disk0, that one without problem) from the machine and install a new one in order to migrate the data with the Migration tool for DPM. Remove the defective disk (disk1), put back the disk0 and run the synchronization/consistency check on all the groups to recreate replicas and recovery points. Run diskpart.exe and clean up the disk (loosing all data) and hoping that he will work after I sync all the protection groups. Both solutions are not elegant but I have no better options at the moment. Please I need some help. Thanks for your time Angelo

    Read the article

  • Dual boot Windows 7 with Windows 8- Dynamic Disk

    - by MeetM
    Its a long explanation. I have a HP Pavilion dm4 notebook. It has pre installed Windows 7 Home Pre. Recently, I tried to install Windows 8 developer preview on my notebook, but while installing, it only allowed me to insatll it on my primary Windows 7 drive I.e. drive C. I had kept 1 empty partition for Windows 8 but when I selectced that option, the next button at the bottom of the window just grey with some error saying Windows cannot boot from this drive....blah blah blah So I googled and found another way of doing it by VHD(virtual hard disk). This seemed to work but on restarting gave me "VHD_BOOT_INITIALIZATION_FAILED" error. After trying all possible ways for around 10 times, I gave up. I noticed that d only thing difference in d tutorials and my notebook is the Disk type. They all had Basic and I have Dynamic. Is that the reason m not able to boot Windows 8? Any suggestions?

    Read the article

  • Why is my disk full?

    - by Agmenor
    I installed Ubuntu 12.04 by doing a fresh install where there was previously Ubuntu 11.10. My computer warns me now that my disk is nearly full. After having run apt-get purge, run apt-get autoremove and emptied the Trash can, I still have this problem as shown by this screenshot of Gparted: The disk /dev/sda7 is indeed full. I ran the Disk Usage Analyzer (Baobab) and I am still not sure of what is happening: One of my hypothesis is that when installing Ubuntu 12.04, I didn't configure my disks well and the disk /dev/sda6 is not mounted well as /home. Is this the reason indeed? What should I do to verify this and then to get the things fixed? Here are a few additional details to answer the questions I received (thank you everybody): My home directory is not encrypted. The Backup utility (Déjà Dup) is not set for automatic backups. (I do it myself and manually.) After I mount /dev/sda6, the command df -h gives Filesystem Size Used Avail Use% Mounted on /dev/sda7 244G 221G 12G 96% / udev 3,9G 4,0K 3,9G 1% /dev tmpfs 1,6G 904K 1,6G 1% /run none 5,0M 0 5,0M 0% /run/lock none 3,9G 164K 3,9G 1% /run/shm /dev/sda6 653G 189G 433G 31% /media/8ec2fa69-039b-4c52-ab1b-034d785132a1 (sorry but formatting this into code does not work, for an unknown reason) Thanks to izx's post, I realized /dev/sda6 was not even mounted before. It contains all the documents I used to have when I was running Ubuntu 11.10.

    Read the article

  • List of usage information to collect in a web application

    - by Thomas Levine
    I'm writing a web application that will allow people to create accounts, edit stuff, send stuff to people, &c. I plan on recording things like when things were created and sent and stuff. Is there a list of usage information that one should collect in a web application? I'd like to see whether I'm missing something. Also, is there a list of usage information that I shouldn't collect (Like maybe information that people find private)?

    Read the article

  • Command line method to find disk usage of camera mounted using gvfs

    - by Hamish Downer
    When my camera was mounted on /media I could use the standard tools (df) to see the disk usage of the card in my camera. However now the camera is mounted using gvfs, and df seems to ignore it. I've also tried pydf and discus to no avail. The camera is definitely available through nautilus, and when I select the camera in nautlius, the status bar tells me the amount of disk free. I can also open the ~/.gvfs/ folder in nautilus and right click on the camera folder and get the disk usage in a graphical way. But that is no use for a script. Are there command line tools that are the equivalent of df for gvfs filesystems? Or even better, a way to make df report on gvfs filesystems?

    Read the article

  • Unmounted disk still spins up regularly

    - by Erik Johansson
    I just added a disk, with partitions but none of them are mounted. The disk will still spin up every now and then. it goes like this: ### disk spins up hdparm -Y /dev/sdb;date /dev/sdb: issuing sleep command 9 feb 2011 23.37.08 CET ### disk spins up hdparm -Y /dev/sdb;date /dev/sdb: issuing sleep command 9 feb 2011 23.46.12 CET Also it always spins up when I shut down the computer. Any tips are welcome, e.g. how can I figure out which process is accessing the disk, are there any daemons doing this? I know it isn't a cron job.

    Read the article

  • Can't write to disk

    - by nofacts
    I have seen questions similar to this, but the answers are either beyond me or the situation doesn't quite match mine. Would appreciate some direction. I recently installed Ubuntu 12.04 LTS. The OS is on a disk formatted as ext4. I added another disk to the system and formatted it as W95 FAT 32 (LBA) (0x0c). I did this because I am moving from Windows to Linux, will be needing to go back and forth with data for a while, and might need to move the disk to a Windows machine. There may have been a better format to use, but if so I didn't know any better. I was able to transfer data from an external drive to this FAT32 drive with no problem. Now, though, when I try to create a new folder or write a file to the disk I get a message that the disk is read-only. If I go to the properties, permissions for the disk, for Folder Access it says 'create and delete files'. If I try to change File Access underneath to 'read and write', either nothing happens or I get a message it can't be done. Thank you for any help.

    Read the article

  • Windows 7 detects my 1 TB disk as a disk with only 31 MB space

    - by ZelluX
    I've added another 1 TB Western Digital disk on my computer (there is a disk with 250 GB already), and after booting to Windows 7, it recognise the disk, but in the Disk Management panel, it says the disk has only 31 MB TOTAL space, so is what it shows in the EVEREST information. And when I rebooted the computer and entered BIOS, it said the new disk has 0 MB disk capacity. Is there any way to fix this problem?

    Read the article

  • Windows software to copy from/to image/disk/partition with offset&compression

    - by Alex131089
    I tried to put everything in the title : I'm looking for a software that is able : to work with image (raw file), partition & whole disk, without distinction to copy whole image or only selected part (let's say .. from 0 to end of last partition, excluding free space for example ; or with start + offset/end system) to handle compression (at least gzip) You recognized, I'm looking for a "dd | gzip" utility with GUI on Windows. The closest tool I found so far is http://www.dubaron.com/diskimage/ but it's a bit old and don't have compression support. Any idea ?

    Read the article

  • How do I give Ubuntu 10.10 more space (when installed inside Windows 7 (via wubi))?

    - by Pavitar
    I had installed Ubuntu inside Windows XP but then I formatted XP and installed Windows 7. EDIT1: I used Wubi for the same. I want to know which one of the two will solve my problem? creating a virtual disk or resizing root? Also is resizing root possible as the 4GB ext4 partition is already in a NTFS format Hard Drive partition. At the time of installation I had allocated only 4GB of space to Ubuntu. I want to increase that size as I keep getting a low disk space notification. I have surfed through a lot of similar questions but this is not a duplicate. Because I want to know a little about the file systems. In order to solve my problem,do I have to increase the size of root.disk? Or will it be solved by creating a virtual disk? Also I want to know the difference between creating a virtual disk and just increasing disk space of root.I'm new to Ubuntu so I don't know how the file systems function. EDIT2:I have created a virtual disk of 10gb ,but I'm still getting the same notification.Is there anyway to install all further applications on the virtual disk I created?

    Read the article

  • Monitor RAM usage on CentOS and restart Apache at a certain usage

    - by Chris
    Hi, I'm running a CentOS 5.3 server with a basic LAMP stack. I've optimized LAMP and my code to run efficiently as possible, but Apache has a memory leak somewhere that kills my server every hour or so. What is the best way to write a script that will monitor the memory usage and if it peaks over, say, 450MB kill all the Apache processes and restart Apache. I know C++/PHP and basic Linux server administration but I'm not familiar with Perl or bash scripting. I'd be open to learn any solutions, though, as a temporary solution while I find the issue.

    Read the article

  • Working with Sub-Optimal Disk Configurations (Making the best of what you’ve got)

    - by Jonathan Kehayias
    This is the first post in a what will be a series of posts on working with a sub-optimal disk configuration to squeeze as much performance out of it as possible.  You might ask what a Sub-Optimal Disk Configuration?  In this case it is a Dell Powervault MD3000 with 15 Seagate Barracuda ES.2 SAS 1 TB 7.2K RPM disks (Model Number ST31000640SS).  This equates to just under 14TB of raw storage that can configured into a number of RAID configurations.  In this case, the disk array...(read more)

    Read the article

  • Disk utility running for a long time

    - by Nik
    I had a spare, old external usb hard disk which stopped working long time back due to improper removal of disk. I tried fixing it in windows (when I did not have ubuntu yet), however I couldn't fix it. So I tried formatting the disk and creating a new partition using the disk utility in ubuntu. However it seems to keep running without any indication of the progress or whatsoever. I have no idea what is happening. I have attached a screenshot below to show what I mean. As you can from the screenshot above it seems to be working on it but no indication on the progress or what it is doing. Any attempt to exit it or do any other task like safe removal or format partition leads to the the following dialog box. What should I do? Wait or restart the computer..???

    Read the article

  • Adding third disk as a single disk in a server with an existing RAID1

    - by slowhandsolo
    I've got a ProLiant DL360 G5 server (Fedora 13) with two SAS disks in a hardware RAID 1, working fine. Now I hot plugged another SAS disk. I'd like to configure this new hard disk out of my RAID, as a single non-RAID disk (ex. /dev/sdb). Even after rebooting the server, I can't see the new disk with "fdisk -l". It displays only my hardware RAID, but not the new disk. [root@myserver]# fdisk -l Disco /dev/cciss/c0d0: 300.0 GB, 299966445568 bytes Disposit. Inicio Comienzo Fin Bloques Id Sistema /dev/cciss/c0d0p1 * 1 126 512000 83 Linux /dev/cciss/c0d0p2 126 71798 292422656 8e Linux LVM Disco /dev/dm-0: 234.9 GB, 234881024000 bytes Disco /dev/dm-1: 10.5 GB, 10536091648 bytes Disco /dev/dm-2: 21.0 GB, 20971520000 bytes Disco /dev/dm-3: 31.5 GB, 31474057216 bytes Disco /dev/dm-4: 1577 MB, 1577058304 bytes However, I can see the new disk using the HP Array Configuration Utility CLI for Linux "hpacucli": [root@myserver]# hpacucli => controller slot=0 physicaldrive all show status physicaldrive 1I:1:1 (port 1I:box 1:bay 1, 300 GB): OK physicaldrive 1I:1:2 (port 1I:box 1:bay 2, 300 GB): OK physicaldrive 1I:1:3 (port 1I:box 1:bay 3, 300 GB): OK => controller slot=0 pd all show detail Smart Array P400i in Slot 0 (Embedded) array A physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 **unassigned** physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: **Unassigned Drive** As you can see, I've got two SAS disks in a RAID 1 and the new disk as "unassigned". Is there any way to work with the new disk as another non-RAID single disk? If relevant, I want to create a new partition in my new disk, format it with mkfs and mount it, but as I can't see it with fdisk, I don't know how to do it. Thanks!

    Read the article

  • Updating to linux-image-3.2.0-26-generic occupies all disk space

    - by user42228
    I just ran a normal update through the update manager that wanted to update me to linux-image-3.2.0-26-generic. The installation paused halfway with a message that the root was full. I checked the disk usage, and noticed that one of the newly installed files: /lib/modules/3.2.0-26-generic/modules.ccwmap took up 63GB(!). Compared to the previous version: /lib/modules/3.2.0-24-generic/modules.ccwmap that took up only 4KB it seems like something went awfully wrong! As mentioned the update was paused when i ran out of disk space. There is no option in the update dialog to cancel or perform rollback on the update. Is it asking for trouble to kill the update manager? Any ideas as to what went wrong, and what I can do to remedy it? It's only minimal how much space I can free on that partition (without deleting the above mentioned file). If it is any help, the update was paused after this: Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic

    Read the article

  • Data Structures usage and motivational aspects

    - by Aubergine
    For long student life I was always wondering why there are so many of them yet there seems to be lack of usage at all in many of them. The opinion didn't really change when I got a job. We have brilliant books on what they are and their complexities, but I never encounter resources which would actually give a good hint of practical usage. I perfectly understand that I have to look at problem , analyse required operations, look for data structure that does them efficiently. However in practice I never do that, not because of human laziness syndrome, but because when it comes to work I acknowledge time priority over self-development. Over time I thought that when I would be better developer I will automatically use more of them - that didn't happen at all or maybe I just didn't. Then I found that the colleagues usually in the same plate as me - knowing more or less some three of data structures and being totally happy about it and refusing to discuss this matter further with me, coming back to conversations about 'cool new languages' 'libraries that do jobs for you' and the joy to work under scrumban etc. I am stuck with ArrayLists, Arrays and SortedMap , which no matter what I do always suffice or either I tweak them to be capable of fulfilling my task. Yes, it might be inefficient but do we really have to care if Intel increases performance over years no matter if we improve our skills? Does new Xeon or IBM machines really care what we use? What if I like build things, but I am not particularly excited whether it is n log(n) or just n? Over twenty years the processing power increased enormously, which gives us freedom of not being critical about which one to use? On top of that new more optimized languages appear which support multiple cores more efficiently. To be more specific: I would like to find motivational material on complex real areas/cases of possible effective usages of data structures. I would be really grateful if you would provide relevant resources. There is similar question ,but in the end the links again mostly describe or do dumb example(vehicles, students or holy grail quest - yes, very relevant) them and people keep referring to the "scenario decides the data structure to use". I want to know these complex scenarios to be able to identify similarities to my scenario and then use them. The complex scenarios where it really matters and not necessarily of quantitive nature. It seems that data structures only concern is efficiency and nothing else? There seems to be no particular convenience for developer in use one over another. (only when I found scientific resources on why exactly simple carbohydrates are evil I stopped eating sugar and candies completely replacing it with less harmful fruits - I hope you can see the analogy)

    Read the article

  • Low disk space: home/user folder occupies 94GB

    - by tedtoy
    I am low on disk space and when I check the Disk Usage analyzer (using gksudo baobab) it indicates that my home/teddy folder is using 94GB, but when I browse through its contents I can only account for about 1gb of that usage. I've tried sudo apt-get clean and deleting the cached package files from Synaptic Package Manager, emptied trash but that has not changed the amount of free space I have. It seems similar to this problem But using the root disk usage analyzer has not given any insight into what is consuming so much space. Any ideas?

    Read the article

  • How to mount a blu-ray drive?

    - by Stephan Schielke
    Maybe it is for the best to close this question. This has nothing to do with a bluray drive in general anymore. Probably a hardware defect. I will try to test it with a windows system and different cables again... Thx so far. I have a bluray/dvd/cdrom drive with SATA. Ubuntu wont find it under /dev/sd wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg2' rwrw-- : 'HL-DT-ST' 'BDDVDRW CH08LS10' ------------------------------------------------------------------------- cdrecord -scanbus scsibus2: 2,0,0 200) 'HL-DT-ST' 'BDDVDRW CH08LS10' '2.00' Removable CD-ROM fdisk dont even lists it. Ubuntu only automounts blank DVDs, but neither CDROM nor Blurays. I also changed the sata slot, sata cable and the power cable. The drive works with a windows system. This happens when I try to mount: sudo mount -t auto /dev/scd0 /media/bluray mount: you must specify the filesystem type I tried all filesystems there are. I also installed makemkv. It finds the drive but not the disc. Here is my /dev ls -al /dev total 12 drwxr-xr-x 17 root root 4420 2011-11-25 19:36 . drwxr-xr-x 28 root root 4096 2011-11-25 07:12 .. crw------- 1 root root 10, 235 2011-11-25 19:28 autofs -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab.old drwxr-xr-x 2 root root 700 2011-11-25 19:27 block drwxr-xr-x 2 root root 100 2011-11-25 19:27 bsg crw------- 1 root root 10, 234 2011-11-25 19:28 btrfs-control drwxr-xr-x 3 root root 60 2011-11-25 19:27 bus drwxr-xr-x 2 root root 3820 2011-11-25 19:28 char crw------- 1 root root 5, 1 2011-11-25 19:28 console lrwxrwxrwx 1 root root 11 2011-11-25 19:28 core -> /proc/kcore drwxr-xr-x 2 root root 60 2011-11-25 19:28 cpu crw------- 1 root root 10, 60 2011-11-25 19:28 cpu_dma_latency drwxr-xr-x 7 root root 140 2011-11-25 19:27 disk crw------- 1 root root 10, 61 2011-11-25 19:28 ecryptfs crw-rw---- 1 root video 29, 0 2011-11-25 19:28 fb0 lrwxrwxrwx 1 root root 13 2011-11-25 19:28 fd -> /proc/self/fd crw-rw-rw- 1 root root 1, 7 2011-11-25 19:28 full crw-rw-rw- 1 root fuse 10, 229 2011-11-25 19:28 fuse crw------- 1 root root 251, 0 2011-11-25 19:28 hidraw0 crw------- 1 root root 251, 1 2011-11-25 19:28 hidraw1 crw------- 1 root root 10, 228 2011-11-25 19:28 hpet lrwxrwxrwx 1 root root 14 2011-11-25 19:27 .initramfs -> /run/initramfs drwxr-xr-x 4 root root 220 2011-11-25 19:28 input crw------- 1 root root 1, 11 2011-11-25 19:28 kmsg srw-rw-rw- 1 root root 0 2011-11-25 19:28 log brw-rw---- 1 root disk 7, 0 2011-11-25 19:28 loop0 brw-rw---- 1 root disk 7, 1 2011-11-25 19:28 loop1 brw-rw---- 1 root disk 7, 2 2011-11-25 19:28 loop2 brw-rw---- 1 root disk 7, 3 2011-11-25 19:28 loop3 brw-rw---- 1 root disk 7, 4 2011-11-25 19:28 loop4 brw-rw---- 1 root disk 7, 5 2011-11-25 19:28 loop5 brw-rw---- 1 root disk 7, 6 2011-11-25 19:28 loop6 brw-rw---- 1 root disk 7, 7 2011-11-25 19:28 loop7 drwxr-xr-x 2 root root 60 2011-11-25 19:27 mapper crw------- 1 root root 10, 227 2011-11-25 19:28 mcelog crw-r----- 1 root kmem 1, 1 2011-11-25 19:28 mem drwxr-xr-x 2 root root 60 2011-11-25 19:27 net crw------- 1 root root 10, 59 2011-11-25 19:28 network_latency crw------- 1 root root 10, 58 2011-11-25 19:28 network_throughput crw-rw-rw- 1 root root 1, 3 2011-11-25 19:28 null crw-rw-rw- 1 root root 195, 0 2011-11-25 19:28 nvidia0 crw-rw-rw- 1 root root 195, 255 2011-11-25 19:28 nvidiactl crw------- 1 root root 1, 12 2011-11-25 19:28 oldmem crw-r----- 1 root kmem 1, 4 2011-11-25 19:28 port crw------- 1 root root 108, 0 2011-11-25 19:28 ppp crw------- 1 root root 10, 1 2011-11-25 19:28 psaux crw-rw-rw- 1 root tty 5, 2 2011-11-25 20:00 ptmx drwxr-xr-x 2 root root 0 2011-11-25 19:27 pts brw-rw---- 1 root disk 1, 0 2011-11-25 19:28 ram0 brw-rw---- 1 root disk 1, 1 2011-11-25 19:28 ram1 brw-rw---- 1 root disk 1, 10 2011-11-25 19:28 ram10 brw-rw---- 1 root disk 1, 11 2011-11-25 19:28 ram11 brw-rw---- 1 root disk 1, 12 2011-11-25 19:28 ram12 brw-rw---- 1 root disk 1, 13 2011-11-25 19:28 ram13 brw-rw---- 1 root disk 1, 14 2011-11-25 19:28 ram14 brw-rw---- 1 root disk 1, 15 2011-11-25 19:28 ram15 brw-rw---- 1 root disk 1, 2 2011-11-25 19:28 ram2 brw-rw---- 1 root disk 1, 3 2011-11-25 19:28 ram3 brw-rw---- 1 root disk 1, 4 2011-11-25 19:28 ram4 brw-rw---- 1 root disk 1, 5 2011-11-25 19:28 ram5 brw-rw---- 1 root disk 1, 6 2011-11-25 19:28 ram6 brw-rw---- 1 root disk 1, 7 2011-11-25 19:28 ram7 brw-rw---- 1 root disk 1, 8 2011-11-25 19:28 ram8 brw-rw---- 1 root disk 1, 9 2011-11-25 19:28 ram9 crw-rw-rw- 1 root root 1, 8 2011-11-25 19:28 random crw-rw-r--+ 1 root root 10, 62 2011-11-25 19:28 rfkill lrwxrwxrwx 1 root root 4 2011-11-25 19:28 rtc -> rtc0 crw------- 1 root root 254, 0 2011-11-25 19:28 rtc0 lrwxrwxrwx 1 root root 3 2011-11-25 19:38 scd0 -> sr0 brw-rw---- 1 root disk 8, 0 2011-11-25 19:28 sda brw-rw---- 1 root disk 8, 1 2011-11-25 19:28 sda1 brw-rw---- 1 root disk 8, 2 2011-11-25 19:28 sda2 brw-rw---- 1 root disk 8, 3 2011-11-25 19:28 sda3 brw-rw---- 1 root disk 8, 5 2011-11-25 19:28 sda5 brw-rw---- 1 root disk 8, 6 2011-11-25 19:28 sda6 brw-rw---- 1 root disk 8, 16 2011-11-25 19:28 sdb brw-rw---- 1 root disk 8, 17 2011-11-25 19:28 sdb1 crw-rw---- 1 root disk 21, 0 2011-11-25 19:28 sg0 crw-rw---- 1 root disk 21, 1 2011-11-25 19:28 sg1 crw-rw----+ 1 root cdrom 21, 2 2011-11-25 19:28 sg2 lrwxrwxrwx 1 root root 8 2011-11-25 19:28 shm -> /run/shm crw------- 1 root root 10, 231 2011-11-25 19:28 snapshot drwxr-xr-x 4 root root 280 2011-11-25 19:28 snd brw-rw----+ 1 root cdrom 11, 0 2011-11-25 19:38 sr0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stderr -> /proc/self/fd/2 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdin -> /proc/self/fd/0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdout -> /proc/self/fd/1 crw-rw-rw- 1 root tty 5, 0 2011-11-25 19:35 tty crw--w---- 1 root tty 4, 0 2011-11-25 19:28 tty0 crw------- 1 root root 4, 1 2011-11-25 19:28 tty1 crw--w---- 1 root tty 4, 10 2011-11-25 19:28 tty10 crw--w---- 1 root tty 4, 11 2011-11-25 19:28 tty11 crw--w---- 1 root tty 4, 12 2011-11-25 19:28 tty12 crw--w---- 1 root tty 4, 13 2011-11-25 19:28 tty13 crw--w---- 1 root tty 4, 14 2011-11-25 19:28 tty14 crw--w---- 1 root tty 4, 15 2011-11-25 19:28 tty15 crw--w---- 1 root tty 4, 16 2011-11-25 19:28 tty16 crw--w---- 1 root tty 4, 17 2011-11-25 19:28 tty17 crw--w---- 1 root tty 4, 18 2011-11-25 19:28 tty18 crw--w---- 1 root tty 4, 19 2011-11-25 19:28 tty19 crw------- 1 root root 4, 2 2011-11-25 19:28 tty2 crw--w---- 1 root tty 4, 20 2011-11-25 19:28 tty20 crw--w---- 1 root tty 4, 21 2011-11-25 19:28 tty21 crw--w---- 1 root tty 4, 22 2011-11-25 19:28 tty22 crw--w---- 1 root tty 4, 23 2011-11-25 19:28 tty23 crw--w---- 1 root tty 4, 24 2011-11-25 19:28 tty24 crw--w---- 1 root tty 4, 25 2011-11-25 19:28 tty25 crw--w---- 1 root tty 4, 26 2011-11-25 19:28 tty26 crw--w---- 1 root tty 4, 27 2011-11-25 19:28 tty27 crw--w---- 1 root tty 4, 28 2011-11-25 19:28 tty28 crw--w---- 1 root tty 4, 29 2011-11-25 19:28 tty29 crw------- 1 root root 4, 3 2011-11-25 19:28 tty3 crw--w---- 1 root tty 4, 30 2011-11-25 19:28 tty30 crw--w---- 1 root tty 4, 31 2011-11-25 19:28 tty31 crw--w---- 1 root tty 4, 32 2011-11-25 19:28 tty32 crw--w---- 1 root tty 4, 33 2011-11-25 19:28 tty33 crw--w---- 1 root tty 4, 34 2011-11-25 19:28 tty34 crw--w---- 1 root tty 4, 35 2011-11-25 19:28 tty35 crw--w---- 1 root tty 4, 36 2011-11-25 19:28 tty36 crw--w---- 1 root tty 4, 37 2011-11-25 19:28 tty37 crw--w---- 1 root tty 4, 38 2011-11-25 19:28 tty38 crw--w---- 1 root tty 4, 39 2011-11-25 19:28 tty39 crw------- 1 root root 4, 4 2011-11-25 19:28 tty4 crw--w---- 1 root tty 4, 40 2011-11-25 19:28 tty40 crw--w---- 1 root tty 4, 41 2011-11-25 19:28 tty41 crw--w---- 1 root tty 4, 42 2011-11-25 19:28 tty42 crw--w---- 1 root tty 4, 43 2011-11-25 19:28 tty43 crw--w---- 1 root tty 4, 44 2011-11-25 19:28 tty44 crw--w---- 1 root tty 4, 45 2011-11-25 19:28 tty45 crw--w---- 1 root tty 4, 46 2011-11-25 19:28 tty46 crw--w---- 1 root tty 4, 47 2011-11-25 19:28 tty47 crw--w---- 1 root tty 4, 48 2011-11-25 19:28 tty48 crw--w---- 1 root tty 4, 49 2011-11-25 19:28 tty49 crw------- 1 root root 4, 5 2011-11-25 19:28 tty5 crw--w---- 1 root tty 4, 50 2011-11-25 19:28 tty50 crw--w---- 1 root tty 4, 51 2011-11-25 19:28 tty51 crw--w---- 1 root tty 4, 52 2011-11-25 19:28 tty52 crw--w---- 1 root tty 4, 53 2011-11-25 19:28 tty53 crw--w---- 1 root tty 4, 54 2011-11-25 19:28 tty54 crw--w---- 1 root tty 4, 55 2011-11-25 19:28 tty55 crw--w---- 1 root tty 4, 56 2011-11-25 19:28 tty56 crw--w---- 1 root tty 4, 57 2011-11-25 19:28 tty57 crw--w---- 1 root tty 4, 58 2011-11-25 19:28 tty58 crw--w---- 1 root tty 4, 59 2011-11-25 19:28 tty59 crw------- 1 root root 4, 6 2011-11-25 19:28 tty6 crw--w---- 1 root tty 4, 60 2011-11-25 19:28 tty60 crw--w---- 1 root tty 4, 61 2011-11-25 19:28 tty61 crw--w---- 1 root tty 4, 62 2011-11-25 19:28 tty62 crw--w---- 1 root tty 4, 63 2011-11-25 19:28 tty63 crw--w---- 1 root tty 4, 7 2011-11-25 19:28 tty7 crw--w---- 1 root tty 4, 8 2011-11-25 19:28 tty8 crw--w---- 1 root tty 4, 9 2011-11-25 19:28 tty9 crw------- 1 root root 5, 3 2011-11-25 19:28 ttyprintk crw-rw---- 1 root dialout 4, 64 2011-11-25 19:28 ttyS0 crw-rw---- 1 root dialout 4, 65 2011-11-25 19:28 ttyS1 crw-rw---- 1 root dialout 4, 74 2011-11-25 19:28 ttyS10 crw-rw---- 1 root dialout 4, 75 2011-11-25 19:28 ttyS11 crw-rw---- 1 root dialout 4, 76 2011-11-25 19:28 ttyS12 crw-rw---- 1 root dialout 4, 77 2011-11-25 19:28 ttyS13 crw-rw---- 1 root dialout 4, 78 2011-11-25 19:28 ttyS14 crw-rw---- 1 root dialout 4, 79 2011-11-25 19:28 ttyS15 crw-rw---- 1 root dialout 4, 80 2011-11-25 19:28 ttyS16 crw-rw---- 1 root dialout 4, 81 2011-11-25 19:28 ttyS17 crw-rw---- 1 root dialout 4, 82 2011-11-25 19:28 ttyS18 crw-rw---- 1 root dialout 4, 83 2011-11-25 19:28 ttyS19 crw-rw---- 1 root dialout 4, 66 2011-11-25 19:28 ttyS2 crw-rw---- 1 root dialout 4, 84 2011-11-25 19:28 ttyS20 crw-rw---- 1 root dialout 4, 85 2011-11-25 19:28 ttyS21 crw-rw---- 1 root dialout 4, 86 2011-11-25 19:28 ttyS22 crw-rw---- 1 root dialout 4, 87 2011-11-25 19:28 ttyS23 crw-rw---- 1 root dialout 4, 88 2011-11-25 19:28 ttyS24 crw-rw---- 1 root dialout 4, 89 2011-11-25 19:28 ttyS25 crw-rw---- 1 root dialout 4, 90 2011-11-25 19:28 ttyS26 crw-rw---- 1 root dialout 4, 91 2011-11-25 19:28 ttyS27 crw-rw---- 1 root dialout 4, 92 2011-11-25 19:28 ttyS28 crw-rw---- 1 root dialout 4, 93 2011-11-25 19:28 ttyS29 crw-rw---- 1 root dialout 4, 67 2011-11-25 19:28 ttyS3 crw-rw---- 1 root dialout 4, 94 2011-11-25 19:28 ttyS30 crw-rw---- 1 root dialout 4, 95 2011-11-25 19:28 ttyS31 crw-rw---- 1 root dialout 4, 68 2011-11-25 19:28 ttyS4 crw-rw---- 1 root dialout 4, 69 2011-11-25 19:28 ttyS5 crw-rw---- 1 root dialout 4, 70 2011-11-25 19:28 ttyS6 crw-rw---- 1 root dialout 4, 71 2011-11-25 19:28 ttyS7 crw-rw---- 1 root dialout 4, 72 2011-11-25 19:28 ttyS8 crw-rw---- 1 root dialout 4, 73 2011-11-25 19:28 ttyS9 d rwxr-xr-x 3 root root 60 2011-11-25 19:28 .udev crw-r----- 1 root root 10, 223 2011-11-25 19:28 uinput crw-rw-rw- 1 root root 1, 9 2011-11-25 19:28 urandom drwxr-xr-x 2 root root 60 2011-11-25 19:27 usb crw------- 1 root root 252, 0 2011-11-25 19:28 usbmon0 crw------- 1 root root 252, 1 2011-11-25 19:28 usbmon1 crw------- 1 root root 252, 2 2011-11-25 19:28 usbmon2 crw------- 1 root root 252, 3 2011-11-25 19:28 usbmon3 crw------- 1 root root 252, 4 2011-11-25 19:28 usbmon4 crw------- 1 root root 252, 5 2011-11-25 19:28 usbmon5 crw------- 1 root root 252, 6 2011-11-25 19:28 usbmon6 crw------- 1 root root 252, 7 2011-11-25 19:28 usbmon7 crw------- 1 root root 252, 8 2011-11-25 19:28 usbmon8 drwxr-xr-x 4 root root 80 2011-11-25 19:28 v4l crw------- 1 root root 10, 57 2011-11-25 19:28 vboxdrv crw------- 1 root root 10, 56 2011-11-25 19:28 vboxnetctl drwxr-x--- 4 root vboxusers 80 2011-11-25 19:28 vboxusb crw-rw---- 1 root tty 7, 0 2011-11-25 19:28 vcs crw-rw---- 1 root tty 7, 1 2011-11-25 19:28 vcs1 crw-rw---- 1 root tty 7, 2 2011-11-25 19:28 vcs2 crw-rw---- 1 root tty 7, 3 2011-11-25 19:28 vcs3 crw-rw---- 1 root tty 7, 4 2011-11-25 19:28 vcs4 crw-rw---- 1 root tty 7, 5 2011-11-25 19:28 vcs5 crw-rw---- 1 root tty 7, 6 2011-11-25 19:28 vcs6 crw-rw---- 1 root tty 7, 128 2011-11-25 19:28 vcsa crw-rw---- 1 root tty 7, 129 2011-11-25 19:28 vcsa1 crw-rw---- 1 root tty 7, 130 2011-11-25 19:28 vcsa2 crw-rw---- 1 root tty 7, 131 2011-11-25 19:28 vcsa3 crw-rw---- 1 root tty 7, 132 2011-11-25 19:28 vcsa4 crw-rw---- 1 root tty 7, 133 2011-11-25 19:28 vcsa5 crw-rw---- 1 root tty 7, 134 2011-11-25 19:28 vcsa6 crw------- 1 root root 10, 63 2011-11-25 19:28 vga_arbiter crw-rw----+ 1 root video 81, 0 2011-11-25 19:28 video0 crw-rw-rw- 1 root root 1, 5 2011-11-25 19:28 zero sg_scan -i gives me: sudo sg_scan -i /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] ATA ST31000524NS SN12 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg1: scsi0 channel=0 id=1 lun=0 [em] ATA WDC WD15EADS-00S 01.0 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg2: scsi2 channel=0 id=0 lun=0 [em] HL-DT-ST BDDVDRW CH08LS10 2.00 [rmb=1 cmdq=0 pqual=0 pdev=0x5] sg_map gives me: /dev/sg0 /dev/sda /dev/sg1 /dev/sdb /dev/sg2 /dev/scd0 lsscsi -l gives me: [0:0:0:0] disk ATA ST31000524NS SN12 /dev/sda state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [0:0:1:0] disk ATA WDC WD15EADS-00S 01.0 /dev/sdb state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [2:0:0:0] cd/dvd HL-DT-ST BDDVDRW CH08LS10 2.00 /dev/sr0 state=running queue_depth=1 scsi_level=6 type=5 device_blocked=0 timeout=30 my udf mod is: filename: /lib/modules/3.0.0-14-generic/kernel/fs/udf/udf.ko license: GPL description: Universal Disk Format Filesystem author: Ben Fennema srcversion: 6ABDE012374D96B9685B8E5 depends: crc-itu-t vermagic: 3.0.0-14-generic SMP mod_unload modversions Do I need special drivers or mods enabled? Do I need to change some BIOS settings? edit: Somehow I am now able to fire the mount command without any filesystem errors, but now I get: mount: no medium found on /dev/sr0

    Read the article

  • rsync'd a folder, folder doesn't show up, but free disk space decreased

    - by Patrick
    I am currently trying to switch from mac to windows/ubuntu dual boot (on 2 seperate internal HDDs), but ran into some trouble restoring my documents. I am not sure all the information below is necessary, but if I knew how to solve it, I wouldn't ask it here. I backed up my mac before buying this laptop on an external HDD with Carbon Copy Cloner. I wanted to put these files on my user folder on my windows HDD, but I could not do that from inside windows (HFS+ format of mac), so I used rsync from inside Ubuntu to copy the documents from the ext hdd to the windows partition. It seemed like it went okay, but from inside windows (and later also Ubuntu) the folder didn't show up. My free HDD space, however, has reduced with about 200 GB (the size of the backup) when looking at the disk properties (from inside Windows and Ubuntu). rsync command I used: rsync -av /media/patrick/Toshiba\ 1.5T/Users/patrickvandenberg/ /media/patrick/Windows8_OS/Users/Patrick/MacBackup/ Folder does not exist: patrick@patrick-Lenovo-IdeaPad-Y410P:~$ cd /media/patrick/Windows8_OS/Users/Patrick/MacBackup bash: cd: /media/patrick/Windows8_OS/Users/Patrick/MacBackup: No such file or directory Size of disk: patrick@patrick-Lenovo-IdeaPad-Y410P:~$ du -hs /media/patrick/Windows8_OS/ 195G /media/patrick/Windows8_OS/ Size of disk according to Disk properties: http://i.stack.imgur.com/OteMX.png (not enough rep to insert the image)

    Read the article

  • easy visualization of usage statistics (web app)

    - by sova
    I have some usage queries for my web app's database, the results of which I want to display graphically. Is there an easy-to-use api that exists for this purpose? I want to show things like average query-time per user (a small user-base), average query time per day, and things like that. I think it would be cool to show these on a two-axis graph. I am displaying this data on my site, so a jQuery/javascript/html solution for rendering information into graphs would be ideal. Thank you :) P.S. I wasn't sure if I should ask this on SO, but I am looking more for which product to use, not how to program with it.

    Read the article

  • easy visualization of usage statistics (web app)

    - by sova
    I have some usage queries for my web app's database, the results of which I want to display graphically. Is there an easy-to-use api that exists for this purpose? I want to show things like average query-time per user (a small user-base), average query time per day, and things like that. I think it would be cool to show these on a two-axis graph. I am displaying this data on my site, so a jQuery/javascript/html solution for rendering information into graphs would be ideal. Thank you :) P.S. I wasn't sure if I should ask this on SO, but I am looking more for which product to use, not how to program with it.

    Read the article

  • How do I throttle a command in a terminal window?

    - by To Do
    I needed to run convert with a lot of images at the same time. The command took quite a while but this doesn't bother me. The issue is that this command rendered my computer unusable while the command was running (for about 15 minutes). So is it possible to throttle the command by limiting resources (processor and memory) to the command, directly from the command line? This can only work if I add something to the same line before pressing Enter because once I start the process the computer slows so much that it is impossible for example to switch to "System monitor" and reduce priority. Edit: top and iotop results I managed to run top and sudo iotop >iotop.txt while doing one of these convert operations. (The iotop.txt file produced is difficult to read) Results of top: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 14275 username 20 0 4043m 3.0g 1448 D 7.0 80.4 0:16.45 convert Results of iotop: [?1049h[1;24r(B[m[4l[?7h[?1h=[39;49m[?25l[39;49m(B[m[H[2JTotal DISK READ: 1269.04 K/s | Total DISK WRITE:[59G0.00 B/s (B[0;7m TID PRIO USER DISK READ DISK WRITE SWAPIN(B[0;1;7m IO(B[0;7m COMMAND [3;2H(B[m2516 be/4 username 350.08 K/s 0.00 B/s 0.00 % 0.00 % zeitgeist-datahub 7394 be/4 username 568.88 K/s 0.00 B/s 77.41 % 0.00 % --rendere~.530483991[5;1H14275 idle username 350.08 K/s 0.00 B/s 37.49 % 0.00 % convert S~f test.pdf[6;2H2048 be/4 root[6;24H0.00 B/s 0.00 B/s 0.00 % 0.00 % [kworker/3:2] [5G1 be/4 root[7;24H0.00 B/s 0.00 B/s 0.00 % 0.00 % init Furthermore, even after the process ends, the computer does not return to the previous performance. I found a way around this by running sudo swapoff -a followed by sudo swapon -a

    Read the article

  • Question about server usage, big community platform

    - by Json
    I’m working on a community platform writen in PHP, MySQL. I have some questions about the server usage maybe someone can help me out. The community is based on JQuery with many ajax requests to update content. It makes 5 - 10 AJAX(Json, GET, POST) requests every 5 seconds, the requests fetch user data like user notifications and messages by doing mySQL queries. I wonder how a server will handle this when there are for more than 5000 users online. Then it will be 50.000 requests every 5 seconds, what kind of server you need to handle this? Or maybe even more, when there are 15.000 users online, 150.000 requests every 5 seconds. My webserver have the following specs. Xeon Quad 2048MB 5000GB traffic Will it be good enough, and for how many users? Anyone can help me out or know where to find such information, like make a calculation?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >