Search Results

Search found 2240 results on 90 pages for 'dr nic'.

Page 2/90 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Register a domain with NIC

    - by tandu
    I recently bought a .es domain for the purpose of creating a domain hack. I registered the domain with esreg.com (SANE Systems, apparently). My card was charged, but the domain is listed as not registered. I have not yet been able to get in contact with them. Their website seems to have a small form to register the site and to specify the nameservers, but when I fill it out it says "You have to specify the NIC handles first." I don't know how to get those. They have for example a box that says "Owner" with an example of SK86-ESNIC-F4. I have another website so I may have this information, but I don't know how to get it.

    Read the article

  • Attempts at NIC teaming on Server 2008 R2 with PRO/1000 MT

    - by Klaus
    I have a Dell PowerEdge 1850 server and a gigabit switch that supports nic teaming (and was configured to do so). The server has a total of four Intel PRO/1000 MT ports, which also support teaming. But.. for some reason Intel does not actually have a version of the drivers/ProSet that will work for these cards on 2008 R2. You have to use the built-in drivers that come with 2008 R2, which do not support the additional features. According to their website, they have no plans to change this. Strangely enough, I experimented with various drivers in an attempt to force it to work. At one point, the teaming was working, but there were side effects (such as the DNS server refusing to start). So now I am back to running just one of the cards, (very) frustrated about the whole situation. I have looked all over to see if there is some way around this, but have not had any success. I know I can probably just get a new network adapter for it, but with the good deal I got, that would cost more than the server! :) While staying with 2008 R2, does anyone know of any possible alternatives? Thanks!

    Read the article

  • Multiple IP's using one NIC connectivity problem - Windows

    - by Vincent
    I have a frame relay network that is directly connected to a GPRS network. I also have a ADSL high speed network and recently I have been trying to achieve the following network configuration using windows 7 (Also tried XP) with no success to date. On one server I have two NIC's NIC1 I would like the following two static IP address's 10.0.1.110 and 10.0.1.200 the cisco router has a default gateway of 10.0.1.1 the ADSL is DHCP. NIC1 and the cisco router do not have access to the internet. NIC2 is setup for DHCP with a primary DNS and secondary DNS configured to enable internet connectivity. With NIC1 all incoming TCP connections are from IP address's starting with 10.192.x.x I cannot establish a TCP connection to both 10.0.1.110 and 10.0.1.200. Its either one or the other. I have a static route implemented in windows of: route -p 10.192.0.0 mask 255.255.0.0 10.0.1.1 metric 1 I have tried leaving out the gateway in the NIC1 and many other combinations with no success. Can anyone please help? What am I doing wrong?

    Read the article

  • NIC reordering on RHEL5/CentOS 5

    - by ewwhite
    I have an HP ProLiant DL360 G6 containing two onboard NICs as well as an HP NC375T (NetXen NX3031 chipset) 4-port PCIe card. The system was running with eth0 and eth1 belonging to the onboard NICs and eth2-eth5 on the NetXen card. I recently rebuilt the server and from the kickstart process onward, the NICs were reordered such that the onboard NICs became eth4 and eth5, while the NetXen card took over eth0-eth3. I've had some experiences in the past where I tied NICs to specific interfaces via changes in the ifcfg-ethX config files, but this is the first time I've ever seen an add-in card take over eth0 from the motherboard's interfaces. This impacted my kickstart scripts, so: 1). How can I ensure that the onboard NICs take precedence in the kickstart arrangement. 2). What is the most consistent way to maintain that ordering through repeated reboots, kernel changes (e.g. going from a RHEL mainline kernel to a RHEL MRG realtime kernel), etc. 3). What is the interaction between the /etc/modprobe.conf module/NIC definitions, the /etc/sysconfig/network-scripts/ifcfg-ethX and the /etc/modprobe.d/blacklist functions in this context?

    Read the article

  • Assign individual NIC to KVM guest

    - by Bin S
    I have a server with 6 NICs installed and is running Ubuntu 12.04LTS. I want to setup 4 guest VMs using kvm. Now I want to assign 2 NICs for the host(1 Public IP and 1 private IP), and 1 NIC each to 4 guest VM(all private IP). How do I do this? /etc/network/interfaces I am having trouble with my configuration file shown below: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.109 netmask 255.255.255.0 gateway 192.168.1.5 auto eth1 iface eth1 inet static address 192.168.1.117 netmask 255.255.255.0 auto eth2 iface eth2 inet manual auto br0 iface br0 inet static address 192.168.1.118 netmask 255.255.255.0 bridge_ports eth2 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto eth3 iface eth3 inet manual auto br1 iface br1 inet static address 192.168.1.119 netmask 255.255.255.0 bridge_ports eth3 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto eth4 iface eth4 inet manual auto br2 iface br2 inet static address 192.168.1.123 netmask 255.255.255.0 bridge_ports eth4 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto eth5 iface eth5 inet manual auto br3 iface br3 inet static address 192.168.1.124 netmask 255.255.255.0 bridge_ports eth5 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off

    Read the article

  • forwarding packets from wireless nic wlan0 to another Wireless nic wlan1

    - by user179759
    I have two wireless interfaces wlan0, wlan1 I want wlan0 to be connected to the internet via a wireless router and I want wlan1 to be in AP mode acting as a router to give internet access to whoever connectes to it. So basically all packets coming through wlan1 should be forwarded to wlan0 = Router = Internet. That's including DNS/DHCP/etc.. [A]~~~~~(Wi-Fi)~~~~~~v [B]~~~~~(Wi-Fi)~~~> [me] ~~~~(Wi-Fi)~~~~~>[AP/Router]------->[internet] [C]~~~~~(Wi-Fi)~~~~~~^ Any idea how can I do this? ps: I tried using bridges but I always get 'operation not supported' using the brctl tool.

    Read the article

  • broadcom 5722 NIC not installed on Ubuntu Server, although driver present

    - by Bastien
    Hello, I just installed Ubuntu Server 10.04 LTS, running kernel 2.6.32-24-server, on a brand new Dell T110 server, supposedly fully compatible with Ubuntu Server. I have two NICs: one ONBOARD, the other additional on PCI. both of them are Broadcom netXtreme 5572. on the first boot of the system, I could see both cards as eth0 and eth1 (with ifconfig) I configured eth0 as static IP (as planned), and did not configure eth1. after rebooting, one of the two NICs "disappeared": it does not appear in ifconfig at all. the one that disappeared is the ONBOARD one. I investigated a bit and found the following things: the card is SEEN, but not "installed", it appears as "UNCLAIMED" in lshw: *-network UNCLAIMED description: Ethernet controller product: NetXtreme BCM5722 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress cap_list configuration: latency=0 resources: memory:df9f0000-df9fffff *-network description: Ethernet interface product: NetXtreme BCM5722 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 00 serial: 00:10:18:60:23:64 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.102 duplex=full firmware=5722-v3.09 ip=10.129.167.25 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:35 memory:dfaf0000-dfafffff so I checked my dmesg and found a few strange lines, showing, there actually is a problem bringing up this card: [ 3.737506] tg3: Could not obtain valid ethernet address, aborting. [ 3.737527] tg3 0000:04:00.0: PCI INT A disabled [ 3.737535] tg3: probe of 0000:04:00.0 failed with error -22 [ 3.737553] alloc irq_desc for 17 on node -1 [ 3.737555] alloc kstat_irqs on node -1 [ 3.737560] tg3 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.737566] tg3 0000:05:00.0: setting latency timer to 64 [ 3.793529] eth0: Tigon3 [partno(BCM95722A2202G) rev a200] (PCI Express) MAC address 00:10:18:60:23:64 [ 3.793532] eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 3.793534] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.793536] eth0: dma_rwctrl[76180000] dma_mask[64-bit] that actually shows that one NIC is recognized, the other is not. I researched a bit more, with lspci -v: 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Subsystem: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Flags: fast devsel, IRQ 16 Memory at df9f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 3 Capabilities: [50] Vital Product Data <?> Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-00-00-fe-ff-00-00-00 Kernel modules: tg3 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Subsystem: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Flags: bus master, fast devsel, latency 0, IRQ 35 Memory at dfaf0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [48] Power Management version 3 Capabilities: [50] Vital Product Data <?> Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number 64-23-60-fe-ff-18-10-00 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: tg3 Kernel modules: tg3 here I could see that the MAC address is 00-00-00-FE-FF-00-00-00, which, according to some forum posts on several websites, could be an issue. I've researched everything I could on the net, and found out several people having slightly comparable issues, but they usually involve different HW, and do not provide a proper explanation / solution... I would appreciate if anyone around here has some info to share ! thanks

    Read the article

  • Hyper-V core NIC speeds and registry changes

    - by gary
    Good afternoon, On a Dell PE T610 I have Hyper-V core running, with 2 x Broadcom BCM5709C NetXtreme II GigE installed. I have noticed that copying large files 17GB for example, from a network physical server to the Hyper-V host local drive [not vm guest] is very slow in comparison to copying from Physical to Physical servers. Copying a 17GB file physical to Hyper-V host takes 30 minutes Copying a 17GB file physical to physical host takes 15 minutes Can someone tell me exactly what registry nodes I should disable on Hyper-V NICs to improve performance. So far I have gone to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class{4 D36E972-E325-11CE-BFC1-08002BE10318} and set the following to 0 on both physical NICs: *LSOv1IPv4 *LSOv2IPv6 *TCPUDPChecksumOffloadIPv4 *TCPUDPChecksumOffloadIPv6 Should I also disable *TCPConnectionOffloadIPv4 & *TCPConnectionOffloadIPv6? Many thanks in advance

    Read the article

  • Intel NIC X540-T1 non-functional in Ubuntu Server 12.04

    - by Jeff Carr
    I have installed three Intel X540-T1's in servers running Ubuntu Server 12.04, but all are non-functional, no link lights, no packets sent or received, and no connection on ip4 or ip6 whether set up as dhcp or static. Also, dmesg doesn't detect cable connection or disconnection. I updated the default ixgbe driver to Intel's latest version (3.11.33) with no change. The ethernet controller is being reported as X540-AT2 (which might be a problem that I can't figure out how to fix), but the subsystem is X540-T1 so I believe that might be intended. Does anyone have any experience with this that could assist? ifconfig eth2 eth2 Link encap:Ethernet HWaddr a0:36:9f:14:5f:ea inet addr:192.168.101.1 Bcast:192.168.101.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1<br> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ethtool -i eth2 driver: ixgbe version: 3.11.33 firmware-version: 0x8000037c bus-info: 0000:08:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes lspci -vvnns 08:00.0 08:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller 10 Gigabit X540-AT2 [8086:1528] (rev 01) Subsystem: Intel Corporation Ethernet Converged Network Adapter X540-T1 [8086:0002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e8000000 (64-bit, prefetchable) [size=2M] Region 4: Memory at e8200000 (64-bit, prefetchable) [size=16K] [virtual] Expansion ROM at e8280000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: ixgbe Kernel modules: ixgbe

    Read the article

  • NIC bonding with two uplinks

    - by Karolis T.
    Is bonding the preferred way of implementing ISP redundancy? In the texts I've seen, bond device has a netmask, gateway of it's own. How can this be obtained if there are two different gateways from two uplinks, which one to choose? Do I need any special routing rules to go with it or does simply configuring separate interfaces (using Debian, /etc/network/interfaces), i.e eth1, eth2 for their corresponding uplinks and bonding them to bond0 handle routing automatically? If I want to NAT client machines, do they use bond device's IP as a gateway? Does the bond0 device is the device that goes into iptables nat rules? Thanks

    Read the article

  • NIC are not advertising Correct Speeds

    - by Squidly
    I have an IBM x336 that is not advertising the proper LINK speeds. One interface is the other is not. I've tried to Force it to 1000/Full but then it just shows link down. I have confirmed the switch is set to auto negotiate like my switches. I have also changed out my Ethernet Cables. I'm at a loss where to look further. I have verified that it will connect at 1G on a different swtich. This also has happened on two different servers on the same switch. This is my output from mii-tool -v for each interface. eth0: negotiated 100baseTx-FD, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD eth1: negotiated 1000baseT-FD flow-control, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

    Read the article

  • Dr. Robert Ballard: Special Guest at Java Strategy Keynote Sunday

    - by Tori Wieldt
    Dr. Robert Ballard, famed explorer who found the Titanic at its final resting place, will be at the Java Strategy Keynote on Sunday. Among the most accomplished and well known of the world's deep-sea explorers, Dr. Ballard is best known for his historic discoveries of hydrothermal vents, the sunken R.M.S. Titanic, the German battleship Bismarck, and numerous other contemporary and ancient shipwrecks around the world. During his long career he has conducted more than 120 deep-sea expeditions using the latest in exploration technology, and he is a pioneer in the early use of deep-diving submarines. You can learn more about Dr. Ballard and undersea exploration at National Geographic and TED. The first 1,000 people to arrive at the JavaOne Keynote hall on Sunday will receive a copy of Dr. Ballard's TV show "The Alien Deep" on Blu-Ray. The Alien Deep explores the sea, thousands of feet beneath the surface, far from the first crack of light, where the planet’s last and greatest secrets hide in the cold darkness of endless night. Viewers get to see underwater worlds via submersible where no one has gone before. The JavaOne Strategy Keynote is on Sunday at 4:00pm PT at Masonic Auditorium, 1111 California Street. See you there!

    Read the article

  • "ToS;DR" note les conditions d'utilisations des services Web et les rend intelligibles, Twitpic bonnet d'âne

    ToS;DR : le projet qui rend intelligibles les conditions d'utilisations des services Web Twitpic obtient le bonnet d'âne Habituellement, lors d'une inscription à un site, l'utilisateur est confronté à la validation de conditions d'utilisation obligatoires pour bénéficier du service. Mais qui les lit vraiment ? Écrites dans un langage purement juridique, ces conditions sont peu compréhensibles. Un nouveau projet, baptisé ToS;DR, vise à vous conseiller de manière plus claire sur la manière dont les sites traitent vos droits ? a priori inaliénables - avant de cliquer sur le bouton 'accepter'. ToS;DR est une abréviation de 'Term of Servi...

    Read the article

  • ASUS unveils the DR-900 E-Reader

    ASUS UK let a few photos out on Flickr recently, showing the new DR-900 E-Reader. The leading tech blogs picked up on the story, but ASUS didn?t give much away about the DR-900?s specification ? but ... [Author: James Kidder - Computers and Internet - April 04, 2010]

    Read the article

  • Ops Center 12c - Provisioning Solaris Using a Card-Based NIC

    - by scottdickson
    It's been a long time since last I added something here, but having some conversations this last week, I got inspired to update things. I've been spending a lot of time with Ops Center for managing and installing systems these days.  So, I suspect a number of my upcoming posts will be in that area. Today, I want to look at how to provision Solaris using Ops Center when your network is not connected to one of the built-in NICs.  We'll talk about how this can work for both Solaris 10 and Solaris 11, since they are pretty similar.  In both cases, WANboot is a key piece of the story. Here's what I want to do:  I have a Sun Fire T2000 server with a Quad-GbE nxge card installed.  The only network is connected to port 2 on that card rather than the built-in network interfaces.  I want to install Solaris on it across the network, either Solaris 10 or Solaris 11.  I have met with a lot of customers lately who have a similar architecture.  Usually, they have T4-4 servers with the network connected via 10GbE connections. Add to this mix the fact that I use Ops Center to manage the systems in my lab, so I really would like to add this to Ops Center.  If possible, I would like this to be completely hands free.  I can't quite do that yet. Close, but not quite. WANBoot or Old-Style NetBoot? When a system is installed from the network, it needs some help getting the process rolling.  It has to figure out what its network configuration (IP address, gateway, etc.) ought to be.  It needs to figure out what server is going to help it boot and install, and it needs the instructions for the installation.  There are two different ways to bootstrap an installation of Solaris on SPARC across the network.   The old way uses a broadcast of RARP or more recently DHCP to obtain the IP configuration and the rest of the information needed.  The second is to explicitly configure this information in the OBP and use WANBoot for installation WANBoot has a number of benefits over broadcast-based installation: it is not restricted to a single subnet; it does not require special DHCP configuration or DHCP helpers; it uses standard HTTP and HTTPS protocols which traverse firewalls much more easily than NFS-based package installation.  But, WANBoot is not available on really old hardware and WANBoot requires the use o Flash Archives in Solaris 10.  Still, for many people, this is a great approach. As it turns out, WANBoot is necessary if you plan to install using a NIC on a card rather than a built-in NIC. Identifying Which Network Interface to Use One of the trickiest aspects to this process, and the one that actually requires manual intervention to set up, is identifying how the OBP and Solaris refer to the NIC that we want to use to boot.  The OBP already has device aliases configured for the built-in NICs called net, net0, net1, net2, net3.  The device alias net typically points to net0 so that when you issue the command  "boot net -v install", it uses net0 for the boot.  Our task is to figure out the network instance for the NIC we want to use.  We will need to get to the OBP console of the system we want to install in order to figure out what the network should be called.  I will presume you know how to get to the ok prompt.  Once there, we have to see what networks the OBP sees and identify which one is associated with our NIC using the OBP command show-nets. SunOS Release 5.11 Version 11.0 64-bit Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. {4} ok banner Sun Fire T200, No Keyboard Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved. OpenBoot 4.30.4.b, 32640 MB memory available, Serial #69057548. Ethernet address 0:14:4f:1d:bc:c, Host ID: 841dbc0c. {4} ok show-nets a) /pci@7c0/pci@0/pci@2/network@0,1 b) /pci@7c0/pci@0/pci@2/network@0 c) /pci@780/pci@0/pci@8/network@0,3 d) /pci@780/pci@0/pci@8/network@0,2 e) /pci@780/pci@0/pci@8/network@0,1 f) /pci@780/pci@0/pci@8/network@0 g) /pci@780/pci@0/pci@1/network@0,1 h) /pci@780/pci@0/pci@1/network@0 q) NO SELECTION Enter Selection, q to quit: d /pci@780/pci@0/pci@8/network@0,2 has been selected. Type ^Y ( Control-Y ) to insert it in the command line. e.g. ok nvalias mydev ^Y for creating devalias mydev for /pci@780/pci@0/pci@8/network@0,2 {4} ok devalias ... net3 /pci@7c0/pci@0/pci@2/network@0,1 net2 /pci@7c0/pci@0/pci@2/network@0 net1 /pci@780/pci@0/pci@1/network@0,1 net0 /pci@780/pci@0/pci@1/network@0 net /pci@780/pci@0/pci@1/network@0 ... name aliases By looking at the devalias and the show-nets output, we can see that our Quad-GbE card must be the device nodes starting with  /pci@780/pci@0/pci@8/network@0.  The cable for our network is plugged into the 3rd slot, so the device address for our network must be /pci@780/pci@0/pci@8/network@0,2. With that, we can create a device alias for our network interface.  Naming the device alias may take a little bit of trial and error, especially in Solaris 11 where the device alias seems to matter more with the new virtualized network stack. So far in my testing, since this is the "next" network interface to be used, I have found success in naming it net4, even though it's a NIC in the middle of a card that might, by rights, be called net6 (assuming the 0th interface on the card is the next interface identified by Solaris and this is the 3rd interface on the card).  So, we will call it net4.  We need to assign a device alias to it: {4} ok nvalias net4 /pci@780/pci@0/pci@8/network@0,2 {4} ok devalias net4 /pci@780/pci@0/pci@8/network@0,2 ... We also may need to have the MAC for this particular interface, so let's get it, too.  To do this, we go to the device and interrogate its properties. {4} ok cd /pci@780/pci@0/pci@8/network@0,2 {4} ok .properties assigned-addresses 82060210 00000000 03000000 00000000 01000000 82060218 00000000 00320000 00000000 00008000 82060220 00000000 00328000 00000000 00008000 82060230 00000000 00600000 00000000 00100000 local-mac-address 00 21 28 20 42 92 phy-type mif ... From this, we can see that the MAC for this interface is  00:21:28:20:42:92.  We will need this later. This is all we need to do at the OBP.  Now, we can configure Ops Center to use this interface. Network Boot in Solaris 10 Solaris 10 turns out to be a little simpler than Solaris 11 for this sort of a network boot.  Since WANBoot in Solaris 10 fetches a specified In order to install the system using Ops Center, it is necessary to create a OS Provisioning profile and its corresponding plan.  I am going to presume that you already know how to do this within Ops Center 12c and I will just cover the differences between a regular profile and a profile that can use an alternate interface. Create a OS Provisioning profile for Solaris 10 as usual.  However, when you specify the network resources for the primary network, click on the name of the NIC, probably GB_0, and rename it to GB_N/netN, where N is the instance number you used previously in creating the device alias.  This is where the trial and error may come into play.  You may need to try a few instance numbers before you, the OBP, and Solaris all agree on the instance number.  Mark this as the boot network. For Solaris 10, you ought to be able to then apply the OS Provisioning profile to the server and it should install using that interface.  And if you put your cards in the same slots and plug the networks into the same NICs, this profile is reusable across multiple servers. Why This Works If you watch the console as Solaris boots during the OSP process, Ops Center is going to look for the device alias netN.  Since WANBoot requires a device alias called just net, Ops Center uses the value of your netN device alias and assigns that device to the net alias.  That means that boot net will automatically use this device.  Very cool!  Here's a trace from the console as Ops Center provisions a server: Sun Sun Fire T200, No KeyboardCopyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved.OpenBoot 4.30.4.b, 32640 MB memory available, Serial #69057548.Ethernet address 0:14:4f:1d:bc:c, Host ID: 841dbc0c.auto-boot? =            false{0} ok  {0} ok printenv network-boot-argumentsnetwork-boot-arguments =  host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok devalias net net                      /pci@780/pci@0/pci@1/network@0{0} ok devalias net4 net4                     /pci@780/pci@0/pci@8/network@0,2{0} ok devalias net /pci@780/pci@0/pci@8/network@0,2{0} ok setenv network-boot-arguments host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:8004/cgi-bin/wanboot-cginetwork-boot-arguments =  host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:8004/cgi-bin/wanboot-cgi{0} ok {0} ok boot net - installBoot device: /pci@780/pci@0/pci@8/network@0,2  File and args: - install/pci@780/pci@0/pci@8/network@0,2: 1000 Mbps link up<time unavailable> wanboot info: WAN boot messages->console<time unavailable> wanboot info: configuring /pci@780/pci@0/pci@8/network@0,2 See what happened?  Ops Center looked for the network device alias called net4 that we specified in the profile, took the value from it, and made it the net device alias for the boot.  Pretty cool! WANBoot and Solaris 11 Solaris 11 requires an additional step since the Automated Installer in Solaris 11 uses the MAC address of the network to figure out which manifest to use for system installation.  In order to make sure this is available, we have to take an extra step to associate the MAC of the NIC on the card with the host.  So, in addition to creating the device alias like we did above, we also have to declare to Ops Center that the host has this new MAC. Declaring the NIC Start out by discovering the hardware as usual.  Once you have discovered it, take a look under the Connectivity tab to see what networks it has discovered.  In the case of this system, it shows the 4 built-in networks, but not the networks on the additional cards.  These are not directly visible to the system controller.  In order to add the additional network interface to the hardware asset, it is necessary to Declare it.  We will declare that we have a server with this additional NIC, but we will also  specify the existing GB_0 network so that Ops Center can associate the right resources together.  The GB_0 acts as sort of a key to tie our new declaration to the old system already discovered.  Go to the Assets tab, select All Assets, and then in the Actions tab, select Add Asset.  Rather than going through a discovery this time, we will manually declare a new asset. When we declare it, we will give the hostname, IP address, system model that match those that have already been discovered.  Then, we will declare both GB_0 with its existing MAC and the new GB_4 with its MAC.  Remember that we collected the MAC for GB_4 when we created its device alias. After you declare the asset, you will see the new NIC in the connectivity tab for the asset.  You will notice that only the NICs you listed when you declared it are seen now.  If you want Ops Center to see all of the existing NICs as well as the additional one, declare them as well.  Add the other GB_1, GB_2, GB_3 links and their MACs just as you did GB_0 and GB_4.  Installing the OS  Once you have declared the asset, you can create an OS Provisioning profile for Solaris 11 in the same way that you did for Solaris 10.  The only difference from any other provisioning profile you might have created already is the network to use for installation.  Again, use GB_N/netN where N is the interface number you used for your device alias and in your declaration.  And away you go.  When the system boots from the network, the automated installer (AI) is able to see which system manifest to use, based on the new MAC that was associated, and the system gets installed. {0} ok {0} ok printenv network-boot-argumentsnetwork-boot-arguments =  host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok devalias net net                      /pci@780/pci@0/pci@1/network@0{0} ok devalias net4 net4                     /pci@780/pci@0/pci@8/network@0,2{0} ok devalias net /pci@780/pci@0/pci@8/network@0,2{0} ok setenv network-boot-arguments host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cginetwork-boot-arguments =  host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok boot net - installBoot device: /pci@780/pci@0/pci@8/network@0,2  File and args: - install/pci@780/pci@0/pci@8/network@0,2: 1000 Mbps link up<time unavailable> wanboot info: WAN boot messages->console<time unavailable> wanboot info: configuring /pci@780/pci@0/pci@8/network@0,2...SunOS Release 5.11 Version 11.0 64-bitCopyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.Remounting root read/writeProbing for device nodes ...Preparing network image for useDownloading solaris.zlib--2012-02-17 15:10:17--  http://10.140.204.22:5555/var/js/AI/sparc//solaris.zlibConnecting to 10.140.204.22:5555... connected.HTTP request sent, awaiting response... 200 OKLength: 126752256 (121M) [text/plain]Saving to: `/tmp/solaris.zlib'100%[======================================>] 126,752,256 28.6M/s   in 4.4s    2012-02-17 15:10:21 (27.3 MB/s) - `/tmp/solaris.zlib' saved [126752256/126752256] Conclusion So, why go to all of this trouble?  More and more, I find that customers are wiring their data center to only use higher speed networks - 10GbE only to the hosts.  Some customers are moving aggressively toward consolidated networks combining storage and network on CNA NICs.  All of this means that network-based provisioning cannot rely exclusively on the built-in network interfaces.  So, it's important to be able to provision a system using other than the built-in networks.  Turns out, that this is pretty straight-forward for both Solaris 10 and Solaris 11 and fits into the Ops Center deployment process quite nicely. Hopefully, you will be able to use this as you build out your own private cloud solutions with Ops Center.

    Read the article

  • Ubuntu Server and setting up two nic cards

    - by kmalik
    I have ubuntu server on a computer with a wireless and hardwired nic card. The wireless needs to get the internet and pass it to the ubuntu server as well as pass it along to the hardwired nic card to more computers. I am having issues getting the basic set up as I believe the route table is grabbing from the wrong nic card. The router is 192.168.1.0 and the server is set to 192.168.1.11 on the wireless card through DHCP ETH0 (wired nic card) is set up to be 10.10.10.0 and the server is 10.10.10.1) I am not a linux or networking guru but basically I am trying to have internet come from a guest network 192.168.1.0 i believe to give internet to the ubuntu server then the ubuntu server will also A) have the wired nic serve DHCP addresses to other computers via a switch or router (that acts as a switch) via 10.10.10.0 addresses. And I would love if it also passed along internet capabilities as well if possible. Bu really at this point my hope is to at least get the internet working on the server and the DHCP to pass correctly. At the moment the specific issue I am having is getting ubuntu server to connect to the internet and have both nic cards up and running correctly. Any help would be appreciated! The route table is as follows: Destination Gateway GM Flags Metric Iface 0.0.0.0 10.10.10.1 0.0.0.0 UG 100 eth0 10.10.10.0 0.0.0.0 255.255.255.0 U 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 eth0 1992.168.1.0 0.0.0.0 255.255.255.255.0 U 0 eth1 My interfaces is set up as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.1 netmask 255.255.255.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.1 domain-name-servers 192.168.1.0 auto eth1 iface eth1 inet dhcp netmask 255.255.255.0 gateway 192.168.1.0 wpa-driver wext wpa-ssid "ssid_name" wpa-ap-scan 1 wpa-proto wpa wpa-pairwise ccmp wpa-group ccmp wpa-key-mgmt wpa-psk wpa-psk "HASH" My DHCPD.conf (as there is a domain name server on here is as follows): ddns-update-style none default-lease-time 600 max-lease-time 7200 authoritative option domain-name "Kamron's Network" option subnet-mask 255.255.255.0 option broadcast-address 10.10.10.255 option routers 192.168.1.0 option domain-name-server 192.168.1.0 98.223.128.213 ooption subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.99 } log-facility local7

    Read the article

  • How to change the IP address on my Ubuntu virtual NIC

    - by DextrousDave
    I have a physical windows system, on which I run Vmware Workstation. Now on VMware I run Ubuntu 12.10. I am running a webserver on Ubuntu via LAMP, inside VMware. Problem: Now my local IP address for my virtual NIC (the one Ubuntu is using) has an address of 192.168.159.7, and my home router only issues IP addresses of the range 10.0.0.x. So if I want to port forward to the virtual NIC, which has a 192.168 address, I cannot, so my LAMP webserver cannot be accessed externally since the router does not know to send the packets on port 80 to the virtual NIC... How do I fix that? The only way I guess is to assign a 10.0.0.x ip address to the virtual NIC?? But how do I do that? I tried to do it on the host Windows machine with 'Get my IP address automatically' but it issues a 192.168 address every time... Thank you

    Read the article

  • Ops Center 12c - Update - Provisioning Solaris on x86 Using a Card-Based NIC

    - by scottdickson
    Last week, I posted a blog describing how to use Ops Center to provision Solaris over the network via a NIC on a card rather than the built-in NIC.  Really, that was all about how to install Solaris on a SPARC system.  This week, we'll look at how to do the same thing for an x86-based server. Really, the overall process is exactly the same, at least for Solaris 11, with only minor updates. We will focus on Solaris 11 for this blog.  Once I verify that the same approach works for Solaris 10, I will provide another update. Booting Solaris 11 on x86 Just as before, in order to configure the server for network boot across a card-based NIC, it is necessary to declare the asset to associate the additional MACs with the server.  You likely will need to access the server console via the ILOM to figure out the MAC and to get a good idea of the network instance number.  The simplest way to find both of these is to start a network boot using the desired NIC and see where it appears in the list of network interfaces and what MAC is used when it tries to boot.  Go to the ILOM for the server.  Reset the server and start the console.  When the BIOS loads, select the boot menu, usually with Ctrl-P.  This will give you a menu of devices to boot from, including all of the NICs.  Select the NIC you want to boot from.  Its position in the list is a good indication of what network number Solaris will give the device. In this case, we want to boot from the 5th interface (GB_4, net4).  Pick it and start the boot processes.  When it starts to boot, you will see the MAC address for the interface Once you have the network instance and the MAC, go through the same process of declaring the asset as in the SPARC case.  This associates the additional network interface with the server.. Creating an OS Provisioning Plan The simplest way to do the boot via an alternate interface on an x86 system is to do a manual boot.  Update the OS provisioning profile as in the SPARC case to reflect the fact that we are booting from a different interface.  Update, in this case, the network boot device to be GB_4/net4, or the device corresponding to your network instance number.  Configure the profile to support manual network boot by checking the box for manual boot in the OS Provisioning profile. Booting the System Once you have created a profile and plan to support booting from the additional NIC, we are ready to install the server. Again, from the ILOM, reset the system and start the console.  When the BIOS loads, select boot from the Boot Menu as above.  Select the network interface from the list as before and start the boot process.  When the grub bootloader loads, the default boot image is the Solaris Text Installer.  On the grub menu, select Automated Installer and Ops Center takes over from there. Lessons The key lesson from all of this is that Ops Center is a valuable tool for provisioning servers whether they are connected via built-in network interfaces or via high-speed NICs on cards.  This is great news for modern datacenters using converged network infrastructures.  The process works for both SPARC and x86 Solaris installations.  And it's easy and repeatable.

    Read the article

  • What Windows service binds a NIC to the network?

    - by Bigbio2002
    I have a server that takes several minutes for the NIC to bind itself to the network upon startup (it has a statically-configured IP). This causes DNS/WINS/Intersite Messaging to fail to start, since they're dependent on a network connection. While I'm still attempting to find a root cause to this issue (I've done firmware updates, checked for any odd drivers/services, no luck so far), but in the meantime, I want to adjust the load order of services to ensure that the NIC binds first before these services attempt to start. The only question is, which service is it? The server is running Server 2008 R2 and only has one NIC installed. (On a side note, there are two other small but odd problems occuring with the server. The server had the issue described in KB2298620, which I've fixed. The other problem occurs in Windows Server Backup. No events appear in the upper portion of the window, despite the fact that backups are running in the background. Whenever I attempt to modify the backup schedule, it gives me the error "Not enough storage is available to process this command" and appears to fail, when, in fact, it actually succeeds. These may be separate issues, but something tells me that some of these might share a common root cause.)

    Read the article

  • ubuntu nic card issue

    - by Blainer
    I am trying to install NIC r8168 and it shows everything installed ok. It is a brand new NIC and the lights wont come on when I plug in a ethernet. The NIC is that is not working is eth0. Why does it show the r8168 driver being used by 0? My NIC model number is ST1000SPEX if anyone is wondering. lsmod Module Size Used by r8168 215669 0 ifconfig eth0 Link encap:Ethernet HWaddr 00:0a:cd:1e:0a:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 00:19:d1:1d:f6:7a inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::219:d1ff:fe1d:f67a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:551467 errors:0 dropped:0 overruns:0 frame:0 TX packets:145219 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:409744342 (409.7 MB) TX bytes:12233173 (12.2 MB) Interrupt:21 Memory:dfde0000-dfe00000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:280 errors:0 dropped:0 overruns:0 frame:0 TX packets:280 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22608 (22.6 KB) TX bytes:22608 (22.6 KB) Ubuntu 11.10 x64 Kernel 3.0.0-12-generic

    Read the article

  • Intel PRO/1000 Server NIC on Windows latency. How to measure?

    - by Bobb
    Please note - this question is about latency of the card itself. Not latency of internet or anything else. Thank you for your attention on this matter. It is often said that good server NIC does make difference compared to low grade cards and on-board Ethernet chips. I understand that on-board chip will likely consume CPU time and stand-alone card would use its own chip. Also server card would be faster than low-grade card. Are these 2 facts explaining most of the server cards advantages over on-board and low-grade cards ethernet? How would you measure latency on the card itself? I saw some reports stating some microseconds figures of NIC latency but I dont see how to measure that... Any advise will be appreciated.

    Read the article

  • NIC light is turned off after boot on Redhat 4.6 server

    - by hoffmandirt
    I have a 2950 blade server setup with Red Hat 4.6 installed. I cannot get the NIC to work properly after reinstalling Linux. I activated the NIC, but the NIC light will not turn on when I plug the network cable into the hub. The status light on the hub will not turn on either. If I run ifconfig, the NIC status is UP. Also I can ping the IP address that I assign to the Linux machine, but I can't ping anything else that is plugged into the hub. When I reboot the system, the NIC light will stay on until the system fully boots and then it will turn off again. Is there something else that I need to do to get the NIC working? It appears to be disabled even though ifconfig says that it is UP. Maybe I need to configure something within the blade server (iDRAC)?

    Read the article

  • FAQ: GridView Calculation with JavaScript

    - by Vincent Maverick Durano
    In my previous post I wrote a simple demo on how to Calculate Totals in GridView and Display it in the Footer. Basically what it does is it calculates the total amount by typing into the TextBox and display the grand total in the footer of the GridView and basically it was a server side implemenation.  Many users in the forums are asking how to do the same thing without postbacks and how to calculate both amount and total amount together. In this post I will demonstrate how to do this using JavaScript. To get started let's go ahead and set up the form. Just for the simplicity of this demo I just set up the form like this:   <asp:gridview ID="GridView1" runat="server" ShowFooter="true" AutoGenerateColumns="false"> <Columns> <asp:BoundField DataField="RowNumber" HeaderText="Row Number" /> <asp:BoundField DataField="Description" HeaderText="Item Description" /> <asp:TemplateField HeaderText="Item Price"> <ItemTemplate> <asp:Label ID="LBLPrice" runat="server" Text='<%# Eval("Price") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Quantity"> <ItemTemplate> <asp:TextBox ID="TXTQty" runat="server"></asp:TextBox> </ItemTemplate> <FooterTemplate> <b>Total Amount:</b> </FooterTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Sub-Total"> <ItemTemplate> <asp:Label ID="LBLSubTotal" runat="server"></asp:Label> </ItemTemplate> <FooterTemplate> <asp:Label ID="LBLTotal" runat="server" ForeColor="Green"></asp:Label> </FooterTemplate> </asp:TemplateField> </Columns> </asp:gridview>   As you can see there's no fancy about the mark up above. It just a standard GridView with BoundFields and TemplateFields on it. Now just for the purpose of this demo I just use a dummy data for populating the GridView. Here's the code below:   public partial class GridCalculation : System.Web.UI.Page { private void BindDummyDataToGrid() { DataTable dt = new DataTable(); DataRow dr = null; dt.Columns.Add(new DataColumn("RowNumber", typeof(string))); dt.Columns.Add(new DataColumn("Description", typeof(string))); dt.Columns.Add(new DataColumn("Price", typeof(string))); dr = dt.NewRow(); dr["RowNumber"] = 1; dr["Description"] = "Nike"; dr["Price"] = "1000"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 2; dr["Description"] = "Converse"; dr["Price"] = "800"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 3; dr["Description"] = "Adidas"; dr["Price"] = "500"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 4; dr["Description"] = "Reebok"; dr["Price"] = "750"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 5; dr["Description"] = "Vans"; dr["Price"] = "1100"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 6; dr["Description"] = "Fila"; dr["Price"] = "200"; dt.Rows.Add(dr); //Bind the Gridview GridView1.DataSource = dt; GridView1.DataBind(); } protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { BindDummyDataToGrid(); } } }   Now try to run the page. The output should look something like below: The Client-Side Calculation Here's the code for the GridView calculation:   <script type="text/javascript"> function CalculateTotals() { var gv = document.getElementById("<%= GridView1.ClientID %>"); var tb = gv.getElementsByTagName("input"); var lb = gv.getElementsByTagName("span"); var sub = 0; var total = 0; var indexQ = 1; var indexP = 0; for (var i = 0; i < tb.length; i++) { if (tb[i].type == "text") { sub = parseFloat(lb[indexP].innerHTML) * parseFloat(tb[i].value); if (isNaN(sub)) { lb[i + indexQ].innerHTML = ""; sub = 0; } else { lb[i + indexQ].innerHTML = sub; } indexQ++; indexP = indexP + 2; total += parseFloat(sub); } } lb[lb.length -1].innerHTML = total; } </script>   The code above calculates the sub-total by multiplying the price and the quantity and at the same time calculates the total amount  by adding the sub-total values. Now you can simply call the JavaScript function above like this:   <ItemTemplate> <asp:TextBox ID="TXTQty" runat="server" onkeyup="CalculateTotals();"></asp:TextBox> </ItemTemplate>   Running the code above will display something like below: That's it! I hope someone find this post useful! Technorati Tags: ASP.NET,JavaScript,GridView,TipsTricks

    Read the article

  • FAQ: GridView Calculation with JavaScript - Formatting and Validation

    - by Vincent Maverick Durano
    In my previous post here we've talked about how to calculate the sub-totals and grand total in GridView using JavaScript. In this post I'm going take more step further and will demonstrate how are we going to format the totals into a currency and how to validate the input that would only allow you to enter a whole number in the quantity TextBox. Here are the code blocks below: ASPX Source:   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title></title> <script type="text/javascript"> function CalculateTotals() { var gv = document.getElementById("<%= GridView1.ClientID %>"); var tb = gv.getElementsByTagName("input"); var lb = gv.getElementsByTagName("span"); var sub = 0; var total = 0; var indexQ = 1; var indexP = 0; var price = 0; for (var i = 0; i < tb.length; i++) { if (tb[i].type == "text") { ValidateNumber(tb[i]); price = lb[indexP].innerHTML.replace("$", "").replace(",", ""); sub = parseFloat(price) * parseFloat(tb[i].value); if (isNaN(sub)) { lb[i + indexQ].innerHTML = "0.00"; sub = 0; } else { lb[i + indexQ].innerHTML = FormatToMoney(sub, "$", ",", "."); ; } indexQ++; indexP = indexP + 2; total += parseFloat(sub); } } lb[lb.length - 1].innerHTML = FormatToMoney(total, "$", ",", "."); } function ValidateNumber(o) { if (o.value.length > 0) { o.value = o.value.replace(/[^\d]+/g, ''); //Allow only whole numbers } } function isThousands(position) { if (Math.floor(position / 3) * 3 == position) return true; return false; }; function FormatToMoney(theNumber, theCurrency, theThousands, theDecimal) { var theDecimalDigits = Math.round((theNumber * 100) - (Math.floor(theNumber) * 100)); theDecimalDigits = "" + (theDecimalDigits + "0").substring(0, 2); theNumber = "" + Math.floor(theNumber); var theOutput = theCurrency; for (x = 0; x < theNumber.length; x++) { theOutput += theNumber.substring(x, x + 1); if (isThousands(theNumber.length - x - 1) && (theNumber.length - x - 1 != 0)) { theOutput += theThousands; }; }; theOutput += theDecimal + theDecimalDigits; return theOutput; } </script> </head> <body> <form id="form1" runat="server"> <asp:gridview ID="GridView1" runat="server" ShowFooter="true" AutoGenerateColumns="false"> <Columns> <asp:BoundField DataField="RowNumber" HeaderText="Row Number" /> <asp:BoundField DataField="Description" HeaderText="Item Description" /> <asp:TemplateField HeaderText="Item Price"> <ItemTemplate> <asp:Label ID="LBLPrice" runat="server" Text='<%# Eval("Price","{0:C}") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Quantity"> <ItemTemplate> <asp:TextBox ID="TXTQty" runat="server" onkeyup="CalculateTotals();"></asp:TextBox> </ItemTemplate> <FooterTemplate> <b>Total Amount:</b> </FooterTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Sub-Total"> <ItemTemplate> <asp:Label ID="LBLSubTotal" runat="server" ForeColor="Green" Text="0.00"></asp:Label> </ItemTemplate> <FooterTemplate> <asp:Label ID="LBLTotal" runat="server" ForeColor="Green" Font-Bold="true" Text="0.00"></asp:Label> </FooterTemplate> </asp:TemplateField> </Columns> </asp:gridview> </form> </body> </html> Code Behind Source:   public partial class GridCalculation : System.Web.UI.Page { private void BindDummyDataToGrid() { DataTable dt = new DataTable(); DataRow dr = null; dt.Columns.Add(new DataColumn("RowNumber", typeof(string))); dt.Columns.Add(new DataColumn("Description", typeof(string))); dt.Columns.Add(new DataColumn("Price", typeof(decimal))); dr = dt.NewRow(); dr["RowNumber"] = 1; dr["Description"] = "Nike"; dr["Price"] = "1000"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 2; dr["Description"] = "Converse"; dr["Price"] = "800"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 3; dr["Description"] = "Adidas"; dr["Price"] = "500"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 4; dr["Description"] = "Reebok"; dr["Price"] = "750"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 5; dr["Description"] = "Vans"; dr["Price"] = "1100"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 6; dr["Description"] = "Fila"; dr["Price"] = "200"; dt.Rows.Add(dr); //Bind the Gridview GridView1.DataSource = dt; GridView1.DataBind(); } protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { BindDummyDataToGrid(); } } } Running the code above will display something like this: On initial load After entering the quantity in the TextBox That's it! I hope someone find this post useful! Technorati Tags: ASP.NET,C#,ADO.NET,JavaScript,GridView

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >