Search Results

Search found 2240 results on 90 pages for 'dr nic'.

Page 7/90 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

  • How to run a local and external website on same computer with 2 NIC's, 2 Routers and 3 seperate networks?

    - by CandN
    Hello and hopefully I can get some answers to my question, though I think I'm making it more complicated for myself than it has to be. My business is a used auto dealership, and I'm in the process of connecting it to the world - via ethernet from the business server [running Xubuntu] to the ISP's ethernet router/modem, so that I can host our own website (no more than 5-10 people probably visiting at any time - mainly paying their bill), as well as set up a web based internal-intranet site - via DD-WRT Router on the 2nd NIC on the business server - that'll be accessed over Wifi from employees personal devices. On the other end of this is trying to offer free wifi to customers that is completely seperate of the 2 mentioned above networks. Quick Rundown: 1. Web Site for Customers to access. I'm going to use no-ip.org for DNS for the moment being, so I'll have a site that customers can access from anywhere in the world at "mybiz.no-ip.org". This will be forwarded to NIC #1 on the server, possibly at an address like "108.69.." as its being provided an IP from the ISP's modem/router, that is from Time Warner, and they allow NO! configuration options. Web Site for employees to access. I'm trying not to use the server too much as a desktop, only for critical situations, so having a backend thats seperate from the front-facing website is critical. This will be the DD-WRT router hardwired into NIC #2 on the server. This WiFi will be password accessible. Public WiFi for customers. The DD-WRT can seperate networks if I'm correct, I just can't seem to understand how to seperate the 2 and still have internet access on both. I've done it before, but the "Public" wifi (with no password set to connect) kept dropping the connection like a problem was happening that I couldn't figure out. So if I could do a little drawing, this is how it would/should possibly look. ISP -- [Sends Public Facing IP of 108.69.*.1/8] -- ISP Modem Router ISP Modem Router (Ethernet Only) -- [Gives Private IP 108.69.*.2] -- Server NIC #1 Server NIC #1 -- [Gives Private IP 108.69.*.3] -- DD-WRT Router DD-WRT Router -- [DHCP Enabled Giving IP's 172.16.0.0/16] -- Employees Network | | --------- [DHCP Enabled Giving IP's 192.168.1.0/24] -- Public WIFI Hope it's not too confusing, but it anyone could give me some good direct tutorials on how to accomplish this, or if YOU know, then it'll be alot of help. Thanks to all in advance. Need anything else to be explained? Don't hesitate to ask! *Using The LAMP stack with Webmin/VirtualMin -Customer site is located in /var/www2/ -Private Employees site is located in /var/www/ Using no-ip.org's dynamic client updater

    Read the article

  • can't connect 2 subnets through RRAS 2008 r2

    - by mcdwight6
    I'm working on a project for a networking class. In VMWare Workstation, I have to set up a 2008 r2 server with DHCP reservations for 2 clients on separate subnets and have them ping each other. Here is the output of the route print command: =========================================================================== Interface List 13 ...00 50 56 2a e7 11 ...... Intel(R) PRO/1000 MT Network Connection #3 10 ...00 0c 29 66 88 dd ...... Intel(R) PRO/1000 MT Network Connection 1 ........................... Software Loopback Interface 1 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 14 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 16 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 17 ...00 00 00 00 00 00 00 e0 isatap.{5B8FB196-616F-4168-A020-03E63A309CEC} =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.0.2 266 0.0.0.0 0.0.0.0 On-link 223.6.6.2 266 10.0.0.0 255.0.0.0 On-link 10.0.0.2 266 10.0.0.2 255.255.255.255 On-link 10.0.0.2 266 10.255.255.255 255.255.255.255 On-link 10.0.0.2 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.6.0.0 255.255.0.0 On-link 10.0.0.2 11 128.6.255.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.0 255.255.255.0 On-link 10.0.0.2 11 223.6.6.0 255.255.255.0 On-link 223.6.6.2 266 223.6.6.2 255.255.255.255 On-link 223.6.6.2 266 223.6.6.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.255 255.255.255.255 On-link 223.6.6.2 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.0.0.2 266 224.0.0.0 240.0.0.0 On-link 223.6.6.2 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.0.0.2 266 255.255.255.255 255.255.255.255 On-link 223.6.6.2 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.0.0.2 Default 0.0.0.0 0.0.0.0 128.6.0.2 Default 0.0.0.0 0.0.0.0 223.6.6.2 Default 128.6.0.0 255.255.0.0 10.0.0.2 1 223.6.6.0 255.255.255.0 10.0.0.2 1 =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 1010 2002::/16 On-link 14 266 2002:8006:2::8006:2/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None My problem is that although I have set up both dynamic and persistent static routes in my r2 server, neither of the clients can ping even the NIC outside its own subnet. For example Client A can ping the NIC at 10.0.0.2 and vice-versa, but it gets a general transmit failure when it tries to ping the card at 223.6.6.2, let alone trying to ping the other client. I have completely disabled the firewalls on all machines and anything else I could think of, without success. What am I missing? Edit: Since posting this, I also noticed that the default gateways on my 2 NICs keep getting zeroed out. Does anyone know a fix for this?

    Read the article

  • IPTables masquerading with one NIC

    - by Tuinslak
    Hi, I am running an OpenVPN server with only one NIC. This is my current layout: public.ip > Cisco firewall > lan.ip > OpenVPN server lan.ip = 192.168.22.70 The Cisco firewall forwards the requests to the oVPN server, thus so far everything works and clients are able to connect. However, all clients connected should be able to access 3 networks: lan1: 192.168.200.0 (vpn lan) > tun0 lan2: 192.168.110.0 (office lan) > eth1 (gw 192.168.22.1) lan3: 192.168.22.0 (server lan) > eth1 (broadcast network) So tun0 is mapped to eth1. Iptables output: # iptables-save # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *filter :INPUT ACCEPT [327:26098] :FORWARD DROP [305:31700] :OUTPUT ACCEPT [291:27378] -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A INPUT -i ! tun0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable -A INPUT -i ! tun0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -d 192.168.200.0/24 -i tun0 -j DROP -A FORWARD -s 192.168.200.0/24 -i tun0 -j ACCEPT -A FORWARD -d 192.168.200.0/24 -i eth1 -j ACCEPT COMMIT # Completed on Wed Feb 16 14:14:20 2011 # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *nat :PREROUTING ACCEPT [302:26000] :POSTROUTING ACCEPT [3:377] :OUTPUT ACCEPT [49:3885] -A POSTROUTING -o eth1 -j MASQUERADE COMMIT # Completed on Wed Feb 16 14:14:20 2011 Yet, clients are unable to ping any ip (including 192.168.200.1, which is the oVPN's IP) When the machine was directly connected to the internet, with 2 NICs, it was quite simply solved with masquerading and adding static routes in the oVPN client's config. However, as masquerading won't accept virtual interfaces (eth0:0, etc) I am unable to get masquerading to work again (and I'm not even sure whether I need virtual interfaces). Thanks. Edit: OpenVPN server: # ifconfig eth1 Link encap:Ethernet HWaddr ba:e6:64:ec:57:ac inet addr:192.168.22.70 Bcast:192.168.22.255 Mask:255.255.255.0 inet6 addr: fe80::b8e6:64ff:feec:57ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6857 errors:0 dropped:0 overruns:0 frame:0 TX packets:4044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:584046 (570.3 KiB) TX bytes:473691 (462.5 KiB) Interrupt:14 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33773 (32.9 KiB) TX bytes:33773 (32.9 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.1 P-t-P:192.168.200.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on a client: # ifconfig eth0 Link encap:Ethernet HWaddr 00:22:64:71:11:56 inet addr:192.168.110.94 Bcast:192.168.110.255 Mask:255.255.255.0 inet6 addr: fe80::222:64ff:fe71:1156/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3466 errors:0 dropped:0 overruns:0 frame:0 TX packets:1838 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:997924 (974.5 KiB) TX bytes:332406 (324.6 KiB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:37847 errors:0 dropped:0 overruns:0 frame:0 TX packets:37847 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2922444 (2.7 MiB) TX bytes:2922444 (2.7 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.30 P-t-P:192.168.200.29 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:689 errors:0 dropped:18 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:468778 (457.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:db:ae:86 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:704699 errors:0 dropped:0 overruns:0 frame:0 TX packets:730176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:520385963 (496.2 MiB) TX bytes:225210422 (214.7 MiB) static routes line at the end of the client's config (I've been playing around with the 192.168.200.0 -- (un)commenting to see if anything changes): route 192.168.200.0 255.255.255.0 route 192.168.110.0 255.255.255.0 route 192.168.22.0 255.255.255.0 route on a vpn client: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.200.29 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.22.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.200.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.110.1 0.0.0.0 UG 0 0 0 eth0 edit: Weirdly enough, if I set push "redirect-gateway def1" in the server config, (and thus routes all traffic through VPN, which is not what I want), it seems to work.

    Read the article

  • Dual Home HP Server running Win2003

    - by Colm
    Hello everyone. I'm new to server dual homing. I have a HP ProLiant DL360 G4p running Win2003 with 2 NICs , only one is currently active. I'd like to activate the 2nd NIC connected (in a active/passive state) to a 2nd switch with only one IP address and ideally only one mac layer address. The 1st switch is a Cisco 2960G and the 2nd is a Cisco C3560G. There are VLANS, RSTP and PAGP in use already. Can someone give me an idea, in broad terms , of what technology/protocols I should be investigating (HSRP, SLB Teaming etc.) ? I can provide more info if needed. Thanks, Colm.

    Read the article

  • Remotedesktop to windows 2008 server with 2 nics

    - by The_Mo
    Hi I have 2 NICs on a Windows 2008 R2 Server. nic1 with ip address 192.168.2.1 with gatewaty 192.168.2.254 and nic2 with ip address 10.96.6.253 with no gateway. The windows 2008 server is connected to a router which is connnected to another router so if I want to connect to the windows 2008 server I use 192.168.0.31 because it is forwarded. If I use remote desktop to connect to that machine I use 192.168.0.31 and that works well, but the server has a seccond nic and I want to be able to connect with a remotedesktop to nic2. Any help appreciated! [server windows 2008 r2 192.168.2.1] -- [router 192.168.2.254/192.168.0.31] -- [my computer 192.168.0.13 gateway 192.168.0.254]

    Read the article

  • Two NICs, one server.

    - by kobrien
    I have two NICs on a fresh install of Ubuntu 10.04 LTS. Both are config'd be dhcp. Both cards are on the same lan with same gateway. everything about the cards is the same except the IPs they get, which is what I want. What I'm trying to achieve is having both NICs operational at the same time. Currently when the server boots, it activates both NICs, but the server can't resolve any domains. If I ifdown one of them and bring it back up, the server is able to resolve domains, but the NIC I bring up won't respond to any traffic. Any ideas?

    Read the article

  • Incoming connections from 2 different Internet connections

    - by RJClinton
    I am hosting a Gameserver on my Windows 2003 Server 32 Bit Server. Due to some limitations of my ISP, I have to take 2 Internet connections in order to satisfy my bandwidth requirement. I am facing serious problems here. The Internet is supplied using Wimax. I am given a POE and the RJ45 from both the POE (2 connections) are plugged into a Netgear 100mbps Switch and another RJ45 connects the server to the switch. I have tried to configure the IP addresses and gateway of both connections to the single NIC in the server. The IP series and the gateway of each Internet connection are very much different. I know that this is not the proper approach, because alternate gateways are meant to be only for backup in case of main gateway failure and the usage of the gateways depends upon the metric (correct me if I am wrong). I am planning to get a second PCI NIC so that I can connect each of the Internet connections into its respective NIC. If I use this approach, will I be able to accept connections on both NICs? Also, please suggest any other alternatives that I might use.

    Read the article

  • Can I have 2Gbit over 1Gbit Nics

    - by Daniel
    So this really baffles me. Apparently because 1Gbit can transmit data in both directions simultaneously it should be possible to get 2Gbit of data transfer on a single NIC (1Gbit flow seend and 1Gbit receive). People claim that because 1Gbit is full-duplex (almost always) it is exactly 2Gbit in total. My intuition and electrical background tells me that something is not right here 4 twisted pairs 250Mbit capacity each gives 1Gbit. Unless it is really possible to transfer data in both directions simultaneously. I did a test with iperf. Ubuntu server 12.04 <-- MacBook Pro. Both with decent CPU speed. Tested speed of connection individually and on Mac I can see 112MB/s regardless which direction data is going. On Ubuntu with vnstat and ifstat I got 970Mbit speeds. Now, launching iperf in server mode on both machines at the same time and sending data using 2 iperf clients shows that I'm for example on Ubuntu box sending at 600Mbit, and receiving 350Mbit. which adds up to pretty much 1Gbit link. So to me there is no magical 2Gbit. Can someone confirm that or tell why I'm wrong? Another thing that confuses me i the fact that e.g. 24-port switch has for example: Throughput»up»to:»50.6Mpps Switching»capacity:»68Gbps Switch»fabric»speed:»88Gbps Which would suggest thay can handle 2GBit per port.

    Read the article

  • XP box with 3 NICs on Server 2003 Domain

    - by Hannibal
    I have assigned all three NICs IP addresses that are outside the DHCP pool. I have 2 NICs are connected to 1 switch and the 3rd to my second switch. I want to assign one of the two NICs on the 1st switch to "normal" network activity (e.g. internet access, RDP, etc.) The other two NICs I want to reserve for mirroring ports on their respective switches. While this machine is connected to the domain I can access the internet and Remote Desktop. I have no idea which NIC I am using until I start mirroring a port, at which time, if I happen to be connected through one of the NICs I have dedicated to mirroring, I lose my remote desktop. I am aware that I would have more control over the NICs using Linux. I want to explore Windows solutions before I go that route because reinstalling another OS would be inconvenient (but not impossible). I would likely use a version of Backtrack (3 or 4 not sure). I would also have to learn how to access the machine remotely but I've done it before so this would be a minor obstacle. Thank you for your assistance.

    Read the article

  • .NET Remoting Client's Problem when running on the machine with Multi NICs

    - by cui chun
    I built a .NET Remoting Client which works quite fine on the machine of single NIC, and lots of testing messages received via remoting event. But when additional NIC was added, the Client seemed to be able to connect the remoting Server, but the testing messages cannot arrive anymore. From debugging, the server end did trigger the event but the client didn't get that. Checking from google and find that a similar problem report: http://www.eggheadcafe.com/community/aspnet/2/10061570/reply.aspx I just wonder if any solutions? Thanks in advance!

    Read the article

  • Broadcom NIC Teaming w/ 802.3ad and Dell Powerconnect 2824

    - by Carltoncl
    We have a Poweredge R210 running WS2K8R2. The server has two Broadcom 5716C NICs running Broadcom BASP. I can team the NICs using the 802.3ad protocol on the server end no problem. I have no VLAN. Now I go to the 2824 switch (default settings all round) running in managed mode and create a LAG with ports g1 and g2. As soon as I add these ports, I lose the ability to send traffic to or from the server. I am much more of a server guy than a networking guy, what am I doing wrong here? Server Static IP Address: 10.10.61.15 Network mask: 255.255.255.0 Gateway: 10.10.61.51 The 2824 switch has an IP address of 10.10.61.51 and in turn has its gateway as our firewall server running ISA Server at 10.10.61.50.

    Read the article

  • Dual NIC Networking CentOS 5.3 (losing connection)

    - by Toymakerii
    I have a CentOS System with two NICs on it. One is Ethernet the other is Wireless. The Ethernet has an address of 192.168.1.110 and is tied to a LAN. (The LAN provides DHCP and DNS for its domain of 192.168.1.*) The Wireless card should have an address of 131.238.. and is tied to the WAN. For some evil reason, I can get the WAN to work for a short amount of time then it suddenly dies. I have to turn on/off the connection to get it to work again. Any suggestions?

    Read the article

  • Pairing Sony bluetooth headphones with my PC, under Windows 7

    - by jonathanconway
    Hi there, I have the Sony DR-BT50 wireless headphones. I've been able to successfully pair them to my iPhone and play music through them, but no such luck with my PC. I can add it to the bluetooth devices, but when the "Driver Software Installation" screen comes up, I get a red X and "No driver found". Any ideas how to fix this? (I have a bluetooth keyboard & mouse paired successfully, so it's not a problem with my laptop's bluetooth.)

    Read the article

  • Pairing Sony bluetooth headphones with my laptop

    - by jonathanconway
    Hi there, I have the Sony DR-BT50 wireless headphones. I've been able to successfully pair them to my iPhone and play music through them, but no such luck with my PC. I can add it to the bluetooth devices, but when the "Driver Software Installation" screen comes up, I get a red X and "No driver found". Any ideas how to fix this? (I have a bluetooth keyboard & mouse paired successfully, so it's not a problem with my laptop's bluetooth.)

    Read the article

  • Wire VMWare Player NIC to a VLAN in Ubuntu 8.04.3

    - by Sophie Charlesworth
    I've got VMWare Player 2.5.x installed on a Ubuntu 8.04.3 host running CentOS 5.3 running Cobbler. VMWare Player has two NICs (I actually took this image from an ESXi image, converted it to Player 2.x image via VMWare Standalone Converter). I've also setup a vlan (vlan5) on the host with 10.0.0.x and I'd like Cobbler to use that VLAN to serve any incoming requests. How do I wire up my VMWare to use the VLAN I've setup? Just one of the NICs. What I'm trying to do is to offer a laptop with a VM that our sysadmins can go, plug it into a box (which does not connect to the interwebs) and install RHEL images via cobbler. So essentially, its a cross over cable from the network port on the lappy to the Dell server box. PXE boot in the dell box and install RHEL. I have the cobbler working fine under VMWare ESXi but not so on the VMWare Player because of the VLAN issue - I think. Any ideas?

    Read the article

  • Wire VMWare Player NIC to a VLAN in Ubuntu 8.04.3

    - by Sophie Charlesworth
    Hi, I've got VMWare Player 2.5.x installed on a Ubuntu 8.04.3 host running CentOS 5.3 running Cobbler. VMWare Player has two NICs (I actually took this image from an ESXi image, converted it to Player 2.x image via VMWare Standalone Converter). I've also setup a vlan (vlan5) on the host with 10.0.0.x and I'd like Cobbler to use that VLAN to serve any incoming requests. How do I wire up my VMWare to use the VLAN I've setup? Just one of the NICs. What I'm trying to do is to offer a laptop with a VM that our sysadmins can go, plug it into a box (which does not connect to the interwebs) and install RHEL images via cobbler. So essentially, its a cross over cable from the network port on the lappy to the Dell server box. PXE boot in the dell box and install RHEL. I have the cobbler working fine under VMWare ESXi but not so on the VMWare Player because of the VLAN issue - I think. Any ideas?

    Read the article

  • Realtek/Intel NIC transfer speed

    - by thepurplepixel
    I have just purchased a Gigabyte GA-X58A-UD7 motherboard, and it has dual Realtek RTL8111D gigabit LAN ports. I also have an Intel PRO/1000 MT PCI gigabit network card lying around from an old desktop. I've heard that Intel PCI-E network cards will often outperform Realtek, Marvell, or other non-Intel on-board network adapters, but my question is will the PRO/1000 MT PCI card outperform a single Realtek RTL8111D gigabit network adapter in terms of transfer speed, or should I keep what I have/buy a PCI-E Intel network adapter?

    Read the article

  • Zabbix Server with Multiple NIC (one on different VLAN) - Monitor a host from both NIC?

    - by Joshua Enfield
    Basically we have many of servers configured for internal use only. I want to ensure the internal services are preserved as internal by checking a host using the local subnet (allowed - this checks if services are up and working), and that the internal services are indeed internal (make sure the services are "down" when checking from different subnet (vlan)) Is there an easy way to do this in Zabbix?

    Read the article

  • Connectivity issues with dual NIC machine in EC2

    - by Matt Sieker
    I'm trying to get some servers set up in EC2 in a Virtual Private Cloud. To do this, I have two subnets: 10.0.42.0/24 - Public subnet 10.0.83.0/24 - Private subnet To bridge these two, I have a Funtoo instance with a pair of NICs: eth0 10.0.42.10 eth1 10.0.83.10 Which has the following routing table: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.83.0 * 255.255.255.0 U 0 0 0 eth1 10.0.83.0 * 255.255.255.0 U 203 0 0 eth1 10.0.42.0 * 255.255.255.0 U 202 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default 10.0.42.1 0.0.0.0 UG 0 0 0 eth0 default 10.0.42.1 0.0.0.0 UG 202 0 0 eth0 An elastic IP is attached to the eth0 interface, and I can connect to it fine remotely. However, I cannot ping anything in the 10.0.83.0 subnet. For now iptables is not set up on the box, so there's no rules that would get in the way (Eventually this will be managed by Shorewall, but I should get basic connectivity done first) Subnet details from the VPC interface: CIDR: 10.0.83.0/24 Destination Target 10.0.0.0/16 local 0.0.0.0/0 [ID of eth1 on NAT box] Network ACL: Default Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY   CIDR: 10.0.83.0/24 VPC: Destination Target 10.0.0.0/16 local 0.0.0.0/0 [Internet Gateway ID] Network ACL: Default (replace) Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY I've been trying to work this out most of the evening, but I'm just stuck. I'm either missing something obvious, or am doing something very wrong. I would think I'd be able to ping from either interface on this box without issue. Hopefully some more pairs of eyes on this configuration will help. EDIT: I am an idiot. After I bothered to install nmap to run some more tests, I discover I can see the ports, and connect to them, pings are just being blocked.

    Read the article

  • Stop Cisco AnyConnect from locking down the NIC

    - by Johannes Rössel
    Cisco's VPN crapclients (including the AnyConnect one) have the nasty habit of clobbering all NICs on the system you're using them. The old client had a checkbox in the connection options that allowed you to use other network interfaces while being connected while the AnyConnect client doesn't have any options at all, seemingly. But they both lock down the network interface they are using to connect to the VPN. Since I am forced to use AnyConnect to actually have an internet connection and I like to control a second computer at home via RDP (over the same network interface so far) this doesn't quite work out. With the old client IPv6 still worked just fine, though AnyConnect seems to dislike that as well now. Is there any way to still use the same network interface for LAN access? I actually don't really care about any possible security implications (which might be why Cisco does this) as it's my freaking internet connection and not a secure way of working from home. The trade-off is quite different :-)

    Read the article

  • wds 2 NIC dhcp error

    - by Xaver
    i have two network interface controllers on client pc. i have a wds server. when i load from pxe on client computer: 'WdsClient: An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment'. I think my client try get ip adress to network interface controller which not connected to lan. How to avoid this error?

    Read the article

  • Linux NIC Bonding Issue (CentOS 4 / RHEL 3)

    - by jinanwow
    I am having an issue with bonding NICs on CentOS 4. It appears the bonding driver does work, but it is stuck in round-robin mode and I am trying to get to active-backup. The current config is: ifcfg-bond0 DEVICE=bond0 IPADDR=192.168.204.18 NETMASK=255.255.255.0 ONBOOT=yes BOOTPROTO=none USERCTL=no TYPE=Bonding BONDING_OPTS="mode=1 miimon=100" ifcfg-eth1 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet MASTER=bond0 SLAVE=yes ifcfg-eth3 DEVICE=eth3 ONBOOT=yes BOOTPROTO=none TYPE=Ethernet MASTER=bond0 SLAVE=yes cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v2.6.3-rh (June 8, 2005) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:17:a4:8f:94:b1 Slave Interface: eth3 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:1b:21:56:b8:69 cat /etc/modprobe.conf alias eth0 tg3 alias eth1 tg3 alias eth3 e1000 alias eth2 e1000 alias bond0 bonding options bond0 mode=1 miimon=100 I have tried moving the bonding information out of the ifcfg-bond0 into the modprobe configuration file. It seems that it is stuck in RR and I am trying to get it into the Active-backup (mode 1) state. Any ideas what would be causing this issue?

    Read the article

  • Linux (Ubuntu 12.04) two gateways one nic

    - by David
    I have Ubuntu 12.04 Server edition Two gateways, both on 192.168.0. network, let's make them 192.168.0.1 and 192.168.0.2 I've read you should be able to add second gateway into /etc/network/interfaces, that it will build out all the routing automatically, but I get "duplicate option" error. So if I have one default gateway, let's say 0.1, and a connection comes through from the 0.2 gateway, my understanding is that it still tries to respond through 0.1 gateway. Can we change this behavior?

    Read the article

  • Can't find onboard NIC with windows server 2008

    - by Sanarothe
    Hi. I'm trying to setup a windows server, but I can't seem to get it to install ethernet drivers :( motherboard is ms-6743 chipset 82865g/pe/p(intel) The MSI drivers specifically for this motherboard are bad links. Not surprising... MSI is rarely helpful. Sisoft Sandra doesn't see any network devices, and all of my leads to drivers have reported that there is no network adapter to install a driver for. The light is ON on the mobo, the onboard setting in bios is ON and the computer worked just fine with a standard install of windows 7 about a month ago. I don't know what to do :(

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >