Search Results

Search found 34649 results on 1386 pages for 'no direct access'.

Page 2/1386 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • ASA hairpining: I basicaly want to allow 2 spokes to be able to communicate with each other.

    - by Thirst4Knowledge
    ASA Spoke to Spoke Communication I have been looking at spke to spoke comms or "hairpining" for months and have posted on numerouse forums but to no avail. I have a Hub and spoke network where the HUB is an ASA Firewall version 8.2 * I basicaly want to allow 2 spokes to be able to communicate with each other. I think that I have got the concept of the ASA Config for example: same-security-traffic permit intra-interface access-list HQ-LAN extended permit ip ASA-LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list HQ-LAN extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 I think my problem may be that the other spokes are not CIsco Firewalls and I need to work out how to do the alternative setups. I want to at least make sure that my firewall etup is correct then I can move onto the other spokes here is my config: Hostname ASA domain-name mydomain.com names ! interface Ethernet0/0 speed 100 duplex full nameif outside security-level 0 ip address 1.1.1.246 255.255.255.224 ! interface Ethernet0/1 speed 100 duplex full nameif inside security-level 100 ip address 192.168.240.33 255.255.255.224 ! interface Ethernet0/2 description DMZ VLAN-253 speed 100 duplex full nameif DMZ security-level 50 ip address 192.168.254.1 255.255.255.0 ! interface Ethernet0/3 no nameif no security-level no ip address ! boot system disk0:/asa821-k8.bin ftp mode passive clock timezone GMT/BST 0 dns server-group DefaultDNS domain-name mydomain.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network ASA_LAN_Plus_HQ_LAN network-object ASA_LAN 255.255.248.0 network-object HQ-LAN 255.255.255.0 access-list outside_acl remark Exchange web access-list outside_acl extended permit tcp any host MS-Exchange_server-NAT eq https access-list outside_acl remark PPTP Encapsulation access-list outside_acl extended permit gre any host MS-ISA-Server-NAT access-list outside_acl remark PPTP access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq pptp access-list outside_acl remark Intra Http access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq www access-list outside_acl remark Intra Https access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq https access-list outside_acl remark SSL Server-Https 443 access-list outside_acl remark Https 8443(Open VPN Custom port for SSLVPN client downlaod) access-list outside_acl remark FTP 20 access-list outside_acl remark Http access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT object-group DM_INLINE_TCP_1 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq 8443 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq www access-list outside_acl remark For secure remote Managment-SSH access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq ssh access-list outside_acl extended permit ip Genimage_Anyconnect 255.255.255.0 ASA_LAN 255.255.248.0 access-list ASP-Live remark Live ASP access-list ASP-Live extended permit ip ASA_LAN 255.255.248.0 192.168.60.0 255.255.255.0 access-list Bo remark Bo access-list Bo extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list Bill remark Bill access-list Bill extended permit ip ASA_LAN 255.255.248.0 Bill.15 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Bill.5 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.160.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.176.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list no-nat extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Genimage_Anyconnect 255.255.255.0 access-list no-nat extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list no-nat extended permit ip HQ-LAN 255.255.255.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip North-Office-LAN 255.255.255.0 HQ-LAN 255.255.255.0 access-list Car remark Car access-list Car extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list Che remark Che access-list Che extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list Chi remark Chi access-list Chi extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list Cla remark Cla access-list Cla extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list Eas remark Eas access-list Eas extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list Ess remark Ess access-list Ess extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list Gat remark Gat access-list Gat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list Hud remark Hud access-list Hud extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list Ilk remark Ilk access-list Ilk extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list Ken remark Ken access-list Ken extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list North-Office remark North-Office access-list North-Office extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list inside_acl remark Inside_ad access-list inside_acl extended permit ip any any access-list Old_HQ remark Old_HQ access-list Old_HQ extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list Old_HQ extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list She remark She access-list She extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list Lit remark Lit access-list Lit extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list Mid remark Mid access-list Mid extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list Spi remark Spi access-list Spi extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list Tor remark Tor access-list Tor extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list Tra remark Tra access-list Tra extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list Tru remark Tru access-list Tru extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list Yo remark Yo access-list Yo extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list Nor remark Nor access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 inactive access-list ST remark ST access-list ST extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list Le remark Le access-list Le extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list DMZ-ACL remark DMZ access-list DMZ-ACL extended permit ip host OpenVPN-Srvr any access-list no-nat-dmz remark DMZ -No Nat access-list no-nat-dmz extended permit ip 192.168.250.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list Split_Tunnel_List remark ASA-LAN access-list Split_Tunnel_List standard permit ASA_LAN 255.255.248.0 access-list Split_Tunnel_List standard permit Genimage_Anyconnect 255.255.255.0 access-list outside_cryptomap_30 remark Po access-list outside_cryptomap_30 extended permit ip ASA_LAN 255.255.248.0 Po 255.255.255.0 access-list outside_cryptomap_24 extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list outside_cryptomap_16 extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list outside_cryptomap_34 extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list outside_31_cryptomap extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list outside_32_cryptomap extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list Genimage_VPN_Any_connect_pix_client remark Genimage "Any Connect" VPN access-list Genimage_VPN_Any_connect_pix_client standard permit Genimage_Anyconnect 255.255.255.0 access-list Split-Tunnel-ACL standard permit ASA_LAN 255.255.248.0 access-list nonat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console notifications logging monitor notifications logging buffered warnings logging asdm informational no logging message 106015 no logging message 313001 no logging message 313008 no logging message 106023 no logging message 710003 no logging message 106100 no logging message 302015 no logging message 302014 no logging message 302013 no logging message 302018 no logging message 302017 no logging message 302016 no logging message 302021 no logging message 302020 flow-export destination inside MS-ISA-Server 2055 flow-export destination outside 192.168.130.126 2055 flow-export template timeout-rate 1 flow-export delay flow-create 15 mtu outside 1500 mtu inside 1500 mtu DMZ 1500 mtu management 1500 ip local pool RAS-VPN 10.0.0.1.1-10.0.0.1.254 mask 255.255.255.255 icmp unreachable rate-limit 1 burst-size 1 icmp permit any unreachable outside icmp permit any echo outside icmp permit any echo-reply outside icmp permit any outside icmp permit any echo inside icmp permit any echo-reply inside icmp permit any echo DMZ icmp permit any echo-reply DMZ asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface global (inside) 1 interface nat (inside) 0 access-list no-nat nat (inside) 1 0.0.0.0 0.0.0.0 nat (DMZ) 0 access-list no-nat-dmz static (inside,outside) MS-ISA-Server-NAT MS-ISA-Server netmask 255.255.255.255 static (DMZ,outside) OpenVPN-Srvr-NAT OpenVPN-Srvr netmask 255.255.255.255 static (inside,outside) MS-Exchange_server-NAT MS-Exchange_server netmask 255.255.255.255 access-group outside_acl in interface outside access-group inside_acl in interface inside access-group DMZ-ACL in interface DMZ route outside 0.0.0.0 0.0.0.0 1.1.1.225 1 route inside 10.10.10.0 255.255.255.0 192.168.240.34 1 route outside Genimage_Anyconnect 255.255.255.0 1.1.1.225 1 route inside Open-VPN 255.255.248.0 OpenVPN-Srvr 1 route inside HQledon-Voice-LAN 255.255.255.0 192.168.240.34 1 route outside Bill 255.255.255.0 1.1.1.225 1 route outside Yo 255.255.255.0 1.1.1.225 1 route inside 192.168.129.0 255.255.255.0 192.168.240.34 1 route outside HQ-LAN 255.255.255.0 1.1.1.225 1 route outside Mid 255.255.255.0 1.1.1.225 1 route outside 192.168.140.0 255.255.255.0 1.1.1.225 1 route outside 192.168.143.0 255.255.255.0 1.1.1.225 1 route outside 192.168.144.0 255.255.255.0 1.1.1.225 1 route outside 192.168.149.0 255.255.255.0 1.1.1.225 1 route outside 192.168.152.0 255.255.255.0 1.1.1.225 1 route outside 192.168.153.0 255.255.255.0 1.1.1.225 1 route outside North-Office-LAN 255.255.255.0 1.1.1.225 1 route outside 192.168.156.0 255.255.255.0 1.1.1.225 1 route outside 192.168.157.0 255.255.255.0 1.1.1.225 1 route outside 192.168.159.0 255.255.255.0 1.1.1.225 1 route outside 192.168.160.0 255.255.255.0 1.1.1.225 1 route outside 192.168.161.0 255.255.255.0 1.1.1.225 1 route outside 192.168.162.0 255.255.255.0 1.1.1.225 1 route outside 192.168.163.0 255.255.255.0 1.1.1.225 1 route outside 192.168.165.0 255.255.255.0 1.1.1.225 1 route outside 192.168.166.0 255.255.255.0 1.1.1.225 1 route outside 192.168.167.0 255.255.255.0 1.1.1.225 1 route outside 192.168.168.0 255.255.255.0 1.1.1.225 1 route outside 192.168.173.0 255.255.255.0 1.1.1.225 1 route outside 192.168.174.0 255.255.255.0 1.1.1.225 1 route outside 192.168.175.0 255.255.255.0 1.1.1.225 1 route outside 192.168.99.0 255.255.255.0 1.1.1.225 1 route inside ASA_LAN 255.255.255.0 192.168.240.34 1 route inside 192.168.124.0 255.255.255.0 192.168.240.34 1 route inside 192.168.50.0 255.255.255.0 192.168.240.34 1 route inside 192.168.51.0 255.255.255.128 192.168.240.34 1 route inside 192.168.240.0 255.255.255.224 192.168.240.34 1 route inside 192.168.240.164 255.255.255.224 192.168.240.34 1 route inside 192.168.240.196 255.255.255.224 192.168.240.34 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server vpn protocol radius max-failed-attempts 5 aaa-server vpn (inside) host 192.168.X.2 timeout 60 key a5a53r3t authentication-port 1812 radius-common-pw a5a53r3t aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 0.0.0.0 0.0.0.0 inside http 1.1.1.2 255.255.255.255 outside http 1.1.1.234 255.255.255.255 outside http 0.0.0.0 0.0.0.0 management http 1.1.100.198 255.255.255.255 outside http 0.0.0.0 0.0.0.0 outside crypto map FW_Outside_map 1 match address Bill crypto map FW_Outside_map 1 set peer x.x.x.121 crypto map FW_Outside_map 1 set transform-set SECURE crypto map FW_Outside_map 2 match address Bo crypto map FW_Outside_map 2 set peer x.x.x.202 crypto map FW_Outside_map 2 set transform-set SECURE crypto map FW_Outside_map 3 match address ASP-Live crypto map FW_Outside_map 3 set peer x.x.x.113 crypto map FW_Outside_map 3 set transform-set SECURE crypto map FW_Outside_map 4 match address Car crypto map FW_Outside_map 4 set peer x.x.x.205 crypto map FW_Outside_map 4 set transform-set SECURE crypto map FW_Outside_map 5 match address Old_HQ crypto map FW_Outside_map 5 set peer x.x.x.2 crypto map FW_Outside_map 5 set transform-set SECURE WG crypto map FW_Outside_map 6 match address Che crypto map FW_Outside_map 6 set peer x.x.x.204 crypto map FW_Outside_map 6 set transform-set SECURE crypto map FW_Outside_map 7 match address Chi crypto map FW_Outside_map 7 set peer x.x.x.212 crypto map FW_Outside_map 7 set transform-set SECURE crypto map FW_Outside_map 8 match address Cla crypto map FW_Outside_map 8 set peer x.x.x.215 crypto map FW_Outside_map 8 set transform-set SECURE crypto map FW_Outside_map 9 match address Eas crypto map FW_Outside_map 9 set peer x.x.x.247 crypto map FW_Outside_map 9 set transform-set SECURE crypto map FW_Outside_map 10 match address Ess crypto map FW_Outside_map 10 set peer x.x.x.170 crypto map FW_Outside_map 10 set transform-set SECURE crypto map FW_Outside_map 11 match address Hud crypto map FW_Outside_map 11 set peer x.x.x.8 crypto map FW_Outside_map 11 set transform-set SECURE crypto map FW_Outside_map 12 match address Gat crypto map FW_Outside_map 12 set peer x.x.x.212 crypto map FW_Outside_map 12 set transform-set SECURE crypto map FW_Outside_map 13 match address Ken crypto map FW_Outside_map 13 set peer x.x.x.230 crypto map FW_Outside_map 13 set transform-set SECURE crypto map FW_Outside_map 14 match address She crypto map FW_Outside_map 14 set peer x.x.x.24 crypto map FW_Outside_map 14 set transform-set SECURE crypto map FW_Outside_map 15 match address North-Office crypto map FW_Outside_map 15 set peer x.x.x.94 crypto map FW_Outside_map 15 set transform-set SECURE crypto map FW_Outside_map 16 match address outside_cryptomap_16 crypto map FW_Outside_map 16 set peer x.x.x.134 crypto map FW_Outside_map 16 set transform-set SECURE crypto map FW_Outside_map 16 set security-association lifetime seconds crypto map FW_Outside_map 17 match address Lit crypto map FW_Outside_map 17 set peer x.x.x.110 crypto map FW_Outside_map 17 set transform-set SECURE crypto map FW_Outside_map 18 match address Mid crypto map FW_Outside_map 18 set peer 78.x.x.110 crypto map FW_Outside_map 18 set transform-set SECURE crypto map FW_Outside_map 19 match address Sp crypto map FW_Outside_map 19 set peer x.x.x.47 crypto map FW_Outside_map 19 set transform-set SECURE crypto map FW_Outside_map 20 match address Tor crypto map FW_Outside_map 20 set peer x.x.x.184 crypto map FW_Outside_map 20 set transform-set SECURE crypto map FW_Outside_map 21 match address Tr crypto map FW_Outside_map 21 set peer x.x.x.75 crypto map FW_Outside_map 21 set transform-set SECURE crypto map FW_Outside_map 22 match address Yo crypto map FW_Outside_map 22 set peer x.x.x.40 crypto map FW_Outside_map 22 set transform-set SECURE crypto map FW_Outside_map 23 match address Tra crypto map FW_Outside_map 23 set peer x.x.x.145 crypto map FW_Outside_map 23 set transform-set SECURE crypto map FW_Outside_map 24 match address outside_cryptomap_24 crypto map FW_Outside_map 24 set peer x.x.x.46 crypto map FW_Outside_map 24 set transform-set SECURE crypto map FW_Outside_map 24 set security-association lifetime seconds crypto map FW_Outside_map 25 match address Nor crypto map FW_Outside_map 25 set peer x.x.x.70 crypto map FW_Outside_map 25 set transform-set SECURE crypto map FW_Outside_map 26 match address Ilk crypto map FW_Outside_map 26 set peer x.x.x.65 crypto map FW_Outside_map 26 set transform-set SECURE crypto map FW_Outside_map 27 match address Nor crypto map FW_Outside_map 27 set peer x.x.x.240 crypto map FW_Outside_map 27 set transform-set SECURE crypto map FW_Outside_map 28 match address ST crypto map FW_Outside_map 28 set peer x.x.x.163 crypto map FW_Outside_map 28 set transform-set SECURE crypto map FW_Outside_map 28 set security-association lifetime seconds crypto map FW_Outside_map 28 set security-association lifetime kilobytes crypto map FW_Outside_map 29 match address Lei crypto map FW_Outside_map 29 set peer x.x.x.4 crypto map FW_Outside_map 29 set transform-set SECURE crypto map FW_Outside_map 30 match address outside_cryptomap_30 crypto map FW_Outside_map 30 set peer x.x.x.34 crypto map FW_Outside_map 30 set transform-set SECURE crypto map FW_Outside_map 31 match address outside_31_cryptomap crypto map FW_Outside_map 31 set pfs crypto map FW_Outside_map 31 set peer Cisco-admin-Peer crypto map FW_Outside_map 31 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 32 match address outside_32_cryptomap crypto map FW_Outside_map 32 set pfs crypto map FW_Outside_map 32 set peer HQ-SDSL-Peer crypto map FW_Outside_map 32 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 34 match address outside_cryptomap_34 crypto map FW_Outside_map 34 set peer x.x.x.246 crypto map FW_Outside_map 34 set transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA crypto map FW_Outside_map 65535 ipsec-isakmp dynamic dynmap crypto map FW_Outside_map interface outside crypto map FW_outside_map 31 set peer x.x.x.45 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 9 webvpn enable outside svc enable group-policy ASA-LAN-VPN internal group-policy ASA_LAN-VPN attributes wins-server value 192.168.x.1 192.168.x.2 dns-server value 192.168.x.1 192.168.x.2 vpn-tunnel-protocol IPSec svc split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel-ACL default-domain value MYdomain username xxxxxxxxxx password privilege 15 tunnel-group DefaultRAGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group DefaultWEBVPNGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.121 type ipsec-l2l tunnel-group x.x.x..121 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.202 type ipsec-l2l tunnel-group x.x.x.202 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.113 type ipsec-l2l tunnel-group x.x.x.113 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.205 type ipsec-l2l tunnel-group x.x.x.205 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.204 type ipsec-l2l tunnel-group x.x.x.204 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.215 type ipsec-l2l tunnel-group x.x.x.215 ipsec-attributes pre-shared-key * tunnel-group x.x.x.247 type ipsec-l2l tunnel-group x.x.x.247 ipsec-attributes pre-shared-key * tunnel-group x.x.x.170 type ipsec-l2l tunnel-group x.x.x.170 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..8 type ipsec-l2l tunnel-group x.x.x.8 ipsec-attributes pre-shared-key * tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.230 type ipsec-l2l tunnel-group x.x.x.230 ipsec-attributes pre-shared-key * tunnel-group x.x.x.24 type ipsec-l2l tunnel-group x.x.x.24 ipsec-attributes pre-shared-key * tunnel-group x.x.x.46 type ipsec-l2l tunnel-group x.x.x.46 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.4 type ipsec-l2l tunnel-group x.x.x.4 ipsec-attributes pre-shared-key * tunnel-group x.x.x.110 type ipsec-l2l tunnel-group x.x.x.110 ipsec-attributes pre-shared-key * tunnel-group 78.x.x.110 type ipsec-l2l tunnel-group 78.x.x.110 ipsec-attributes pre-shared-key * tunnel-group x.x.x.47 type ipsec-l2l tunnel-group x.x.x.47 ipsec-attributes pre-shared-key * tunnel-group x.x.x.34 type ipsec-l2l tunnel-group x.x.x.34 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..129 type ipsec-l2l tunnel-group x.x.x.129 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.94 type ipsec-l2l tunnel-group x.x.x.94 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.40 type ipsec-l2l tunnel-group x.x.x.40 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.65 type ipsec-l2l tunnel-group x.x.x.65 ipsec-attributes pre-shared-key * tunnel-group x.x.x.70 type ipsec-l2l tunnel-group x.x.x.70 ipsec-attributes pre-shared-key * tunnel-group x.x.x.134 type ipsec-l2l tunnel-group x.x.x.134 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.163 type ipsec-l2l tunnel-group x.x.x.163 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x.2 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group ASA-LAN-VPN type remote-access tunnel-group ASA-LAN-VPN general-attributes address-pool RAS-VPN authentication-server-group vpn authentication-server-group (outside) vpn default-group-policy ASA-LAN-VPN tunnel-group ASA-LAN-VPN ipsec-attributes pre-shared-key * tunnel-group x.x.x.184 type ipsec-l2l tunnel-group x.x.x.184 ipsec-attributes pre-shared-key * tunnel-group x.x.x.145 type ipsec-l2l tunnel-group x.x.x.145 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.75 type ipsec-l2l tunnel-group x.x.x.75 ipsec-attributes pre-shared-key * tunnel-group x.x.x.246 type ipsec-l2l tunnel-group x.x.x.246 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x..2 ipsec-attributes pre-shared-key * tunnel-group x.x.x.98 type ipsec-l2l tunnel-group x.x.x.98 ipsec-attributes pre-shared-key * ! ! ! policy-map global_policy description Netflow class class-default flow-export event-type all destination MS-ISA-Server policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 Anyone have a clue because Im on the verge of going postal.....

    Read the article

  • Windows 2008 Routing and Remote access server - access to the internet

    - by Ian
    I have a windows 2008 r2 remote access server set up and running. The remote access works fine. My problem is that the remote access server itself doesn't have access to the internet. The box has two interfaces, an internal and an external. Inbound connections come in on the external interface and RRAS responds. All wall and nice. I want to be able to use windows update, browse, etc from this box but can't as the outbound traffic just gets blocked. I've tried going into the RRAS mmc tool and opening the interface properties, under which there are two buttons for inbound and outbound filters. There I tried adding ports 80 and 443, but this doesn't work completely. I can see the connection initiating (Syn goes out) but the session never establishes itself. Anyone done this or got any suggestions?

    Read the article

  • Configure Web app for external access (IIS7), allowing only certain users via AD group. All users need internal access

    - by White Island
    We have a Web app running in IIS7 (Server 2008 R2). I now need to allow external access with an SSL certificate, so certain users (e.g. the owner of the company) can use it remotely without VPN. They want to roll out the external access only to those specific users at first (thinking: a Windows credential prompt), BUT everyone will still need access internally (HTTP), without the prompt. I have the SSL cert installed on the server and public DNS configured. I've been trying to figure out how to work the authentication/authorization. I was thinking I need to disable Anonymous authn and set Windows authn, then I keep coming back to 'URL Authorization' in my research for the group setting; however, when I tried URL authz, (removed allow all, added allow rule for the special group), it broke the site internally (403.2 Forbidden, I believe it was). I thought maybe setting up a second site in IIS pointing to the same program would work, but the exact same thing happened (and again with a new app pool, just for kicks). So I guess my question is, how would you do this: allow external access, limited to users in a specific AD group, while still allowing internal access without a credentials prompt? How do I separate the external HTTPS and internal HTTP authorization requirements? Will I need to just copy the entire contents of the app in Windows Explorer to a new folder and create my external site from that? Is Windows authentication the correct option for this? I did come across this, which refers to creating a custom module. While it sounds like a solution, it's not one I'm familiar with, and I just wondered if there is a simpler way to get it to work: http://forums.iis.net/p/1182792/2000775.aspx Thanks!

    Read the article

  • VBE6.dll not found when opening Access 2007 database in Access 2010

    - by The Matt
    I have an access 2007 database that has some VBA code in it. I need to open this database in Access 2010, but when I first open it I get an error that says: the expression on open you entered as the event property setting produced the following error: file not found: VBE6.dll I believe it's becuase Access 2010 references VBE7.dll when it loads up, and my database was built to reference VBE6.dll. I've tried putting VBE6.dll in the same folder that VBE7.dll resides in, hoping it would just get loaded up, but no luck. What can I do to resolve this?

    Read the article

  • Automating Access 2007 Queries (changing one criteria)

    - by Graphth
    So, I have 6 queries and I want to run them all once at the end of each month. (I know a bit about SQL but they're simply built using Access's design view). So, in the next few days, perhaps I'll run the 6 queries for May, as May just ended. I only want the data from the month that just ended, so the query has Criteria set as the name of the month (e.g., May). Now, it's not hugely time consuming to change all of these each month, but is there some way to automate this? Currently, they're all set to April and I want to change them all to May when I run them in a few days. And each month, I'd like to type the month (perhaps in a textbox in a form or somewhere else if you know a better way) just once and have it change all 6 queries, without having to manually open all 6, scroll over to the right field and change the Criteria. Note (about VBA): I have used Excel VBA so I know the basics of VBA but I don't really know anything specific to Access (other than seeing code a few times). And, others will use this who do not know anything about Access VBA. So, I think I have found a similar question/answer that could do this in VBA, but I'd rather do it some other way. If the query needs to be slightly redesigned later, probably by someone who doesn't know Access VBA at all, it'd be nice to have a solution not involving VBA if that is even possible.

    Read the article

  • MS Access 2003 - Failure to create MDE file: error VBA is corrupt?

    - by Justin
    Ok so this is a brand new snag I have run into. I am trying to launch a new MDE from my source MDB file, and it is locking up Access. So in my mdb, I am first compacting and repairing, and then selecting create a new mde (just as I have done many times before). It looks like it is starting the process, but never gets to where it compacts when it is done, and access is not responding. So after I force close the app, I look in the folder where I am trying to create the MDE to and I see there is a new access db1 file there. If I try to open that it gives me an error that says file not found, and then it says the Visual Basic for Applications is corrupt. The thing is, I just made a very simple adjustment to the code since last launching an mde, and after this I double and triple checked it...its not that because its just a simple open this form and close this one addition. I did however have my source mdb file on a disc that I copied to my laptop, and then tried to re link the tables to the network drive (had them linked to other tables on my local drive so that I could develop offline)?? PLEASE HELP!!!

    Read the article

  • Outlook Web Access: "Outlook Web Access has encountered a Web browsing error"

    - by Calum
    When one of my colleagues is accessing Outlook Web Access from IE, he frequently gets an error reported: "Outlook Web Access has encountered a Web browsing error". The error report includes the following: Client Information User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; GTB5; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506) CPU Class: x86 Platform: Win32 System Language: en-gb User Language: en-gb CookieEnabled: true Mime Types: Exception Details Date: Tue Apr 6 16:46:54 UTC+0100 2010 Message: Automation server can't create object Url: https://example.com/owa/x.y.z.a/scripts/premium/uglobal.js Line: 85 Any idea as to what might be causing such a problem? The only solution suggested so far is "Reinstall Windows", which he'd rather avoid.

    Read the article

  • LINKED TABLES BETWEEN MS ACCESS 2003 AND MS ACCESS 2007-WRITE PERMISSIONS DENIED

    - by STEVE KING
    We are in the process of switching over to ACCESS 2007. We have numerous data tables in ACCESS 2003 files. In one case, the user has 2007 on his PC and opend the front end in 2007. No problems. When the the user is done, he clicks a button that executes a macro full of update queries. The macro reaches the first query and halts. We get a messge saying we do not have permisons to write to this linked table (2003 format). There were no security files involved. We re-linked from 2007, same problem. LAN permssions were ok. I wound up having to import the tables to front end in order for the user to be able to do his job.

    Read the article

  • MS Access 2007 end user access

    - by LtDan
    I need some good advise. I have used Access for many years and I use Sharepoint but never the two combined. My newly created Access db needs to be shared with many users across the organization. The back end is SQL and the old way to distribute the database would be placing the db on a shared drive, connecting their PC ODBC connections to the SQL db and then they would open the database and have at it. This has become the OLD way. What is the best (and simpliest) way to allow the end users to utilize a frontend for data entry/edit reporting etc. Can I create a link through SharePoint and the user just open it from there. Your good advise is greatly approciated.

    Read the article

  • Access - Force Form Refresh on New Record

    - by gamerzfuse
    Let me set the stage here a bit: I have an Access project with various buttons, triggers, macros, etc. I needed an Appointment Date field to only show when the button APPOINTMENT MADE is toggled ON. This works great. The problem arises when you submit a form with the APPOINTMENT MADE toggled. Once the record is inserted, the Access file clears all fields, but leaves the Appointment Date enabled, when it should be disabled by default. I have tried the Current, Load, Before Insert, After Insert and many other options on the FORM properties. Am I missing a simple way to force a refresh so the field goes back to it's default DISABLED? Thanks in advance!

    Read the article

  • Forefront UAG vs. Server 2012 Direct Access

    - by Matt Bear
    So I'm working on bringing my company into the 21'st century, with virtual servers, active directory, ADFS, SSO etc. Its a huuuuge project, with a future goal of ISO 27001 cerification. The current question is, does the Direct Access role offered by Server 2012 perform the same role as Forefront Unified Access Gateway 2010 does? I'm sure there are many differences, but my primary concerns are Sharepoint publishing, ADFS proxy, reverse proxy, remote connection, and o365 syncronization.

    Read the article

  • Count Items in Access 2003

    - by Anna
    I have a table which contains a column with different items which i would like to count by there type. For example the table looks like the following: Id Type 1 Table 2 Table 3 TV 4 TV 5 Table 6 TV 7 TV The result should looks like: Type NumOfItems Table 3 TV 4 I use the following code which doesn't work for my Access 2003: SELECT Table1.Type, Count(Table1.Type) AS NumOfItems FROM Table1

    Read the article

  • config a router to act as a client and access another wireless router/network, wag120n

    - by mihai
    I currently have a WAG120N( http://www.linksysbycisco.com/EU/en/support/WAG120N) router and I would like to know if it's possible to configure it to connect to a different wireless network(WEP with no password) so I can get internet access on it and then to connect a pc to this router(WAG120N) so I can take advantage of the internet connection. Basically I think that my need is a kind of yagi antenna but as I already got this router I would like to know if I can use instead it of yagi . Thank you in advance for any answer !

    Read the article

  • config a router to act as a client and access another wireless router/network, wag120n

    - by mihai
    I currently have a WAG120N( http://www.linksysbycisco.com/EU/en/support/WAG120N) router and I would like to know if it's possible to configure it to connect to a different wireless network(WEP with no password) so I can get internet access on it and then to connect a pc to this router(WAG120N) so I can take advantage of the internet connection. Basically I think that my need is a kind of yagi antenna but as I already got this router I would like to know if I can use instead it of yagi . Thank you in advance for any answer !

    Read the article

  • MS Access 2003 - Unbound Form uses INSERT statement to save to table; what about subforms?

    - by Justin
    So I have an unbound form that I use to save data to a table on button click. Is there a way I can have subforms for entry that will allow me to save data to the table within that same button click? Basically I want to add more entry options for the user, and while I know other ways to do it, I am particularly curious about doing it this way (if it can be done). So lets say the 'parent form' is frmMain. And there are two child forms "sub1" and "sub2". Just for example sake lets say on frmMain there are two text boxes: txtTitle & txtAuthor. sub1 and sub2 both have a text Box on them that represent something like prices. The idea is Title & author of a book, and then a price at each store (simplified). So I tried this (because I thought it was worth a shot): Dim db as DAO.database Dim sql as String sql = "INSERT INTO (Title, Author, PriceA, PriceB) VALUES (" if not isnull(me.txtTitle) then sql = sql & """" & me.txtTitle & """," Else sql = sql & " NULL," End If if not IsNull(me.txtAuthor) then sql = sql & " """ & me.txtAuthor & """," else sql = sql & " NULL," end if if not IsNull (forms!sub1.txtPrice) then sql = sql & " """ & forms!sub1.txtPrice & """," else sql = sql & " NULL," end if without finishing the code, i think you may see the GOTCHA i am headed for. I tried this and got an "Access cannot find the form "" ". I think I can pretty much see why on this approach too, because when I click the button that calls the new sub form into the parent form, the values that were just entered are not held/saved as sub1 closes and sub2 opens. I should mention that the idea above is not intended to be a one or the other approach, rather both sub forms used everytime. so this is an example. i want to use this method (if possible) to have about 7 different sub form choices in one form, and be able to save to a table via a SQL statement. I realize that there may be better ways, but I am just wondering if I can get there with this approach out of curiousity. Thanks as always!

    Read the article

  • MS Access 2003 - Option Group frame: can I add text boxes that are part of the frame instead of rad

    - by Justin
    Ok so this maybe a simple/silly question but I don't know so here goes: In access let's say I want to have a frame control, so I click the option group button and add it to the desgin surface. However, I am not wanting to use this as a option group with radio button selection, instead I would like to add text boxes instead the frame, so that when I reference the frame, it references every control instead of it, hence the text boxes, cbo boxes, etc.....just as it would if they were radio option selections. So can you do this? I want whatever controls I add inside the frame to be easily referenced (i.e. make all controls visible just by using frameExample.visible = true) so that I can build my own tab control groupings..... can this be done? Thanks! EDIT: What I am trying to accomplish is having a form that includes a collection of controls (input controls - cbo boxes, text boxes, etc), that serve as the Main record information. These are saved to a table via an INSERT statement on button_click because this form is unbound. Next I have 8 categories that are relative per each main record (and data that goes along with it). Each of these categories could have a sub form area and a button click that bring it's relative form into the sub form area. These sub forms would be unbound as well as I would just save data via SQL statement. So i know I could accomplish this by running the insert statement from the parent form, on the main collection control's data that would create the KeyID number, then run a SQL statement that would turn around and load that KeyID number right back onto the page in a hidden text box. Then when I click one of the sub forms and load its relative collection of controls, I could then save that data along with KeyID for each of these sub-forms/tables. SO...... I was wondering if instead you could define these controls as a collection so that you could hide and make visible all the ones you need on button clicks and avoid the need for additional forms (subs). I know that if a user enters data into a text box, and then somewhere along the way that box becomes hidden, the data still exists in it and still ends up in the SQL statement.... So I want all these controls to exist on the same form, but I thought what is I could encapsulate them into a frame like an option group, then I could call the frame and all the relative controls would be called up (made visible) as needed. Sorry for the long explanation but I thought it would help.

    Read the article

  • is it possible to access/write database ms access 2003 .mdb at the same time?

    - by tintincute
    hi i have a problem, i have a user who created a database using ms access 2003 the problem is, if he's opening the db and made some changes, the other user can open the db but they can't work on it. but if he's exited the program, then the user can make some changes. i would like to know if its possible; that they can work at the same time when they open the database? Thanks I attached a .jpg here to see the program: www.freeimagehosting.net/image.php?ed11af4cc5.jpg additional jpg: http://www.freeimagehosting.net/image.php?3c60d8e046.jpg additional question: I tried to do the "Splitting of Database" here and after I clicked on Split I got an error: "The database engine couldn't lock the table, because it is already in use by another person or process"... what does that mean? Did I lock the table? www.freeimagehosting.net/image.php?fc52cfc486.jpg

    Read the article

  • LiteSpeed enable Access-Control-Allow-Origin (no response header on CORS request)

    - by Joe Coder Guy
    Seriously, I can't find a single page discussing this for litespeed. Using this format in the htaccess "Header set Access-Control-Allow-Origin http://aSite.com" (and https) sends the setting in the http response header, but I still get the "XMLHttpRequest cannot load https://aSite.com/aFile.php. Origin aSite.com is not allowed by Access-Control-Allow-Origin" error when trying to access https from http origin. Also, I receive no response header for https, only that message shows up in Chrome. Is the server still blocking it even though I've sent the proper headers? I read elsewhere that it helps to add these terms Access-Control-Allow-Headers X-Requested-With Access-Control-Allow-Methods OPTIONS, GET, POST Access-Control-Allow-Headers Content-Type, Depth, User-Agent, X-File-Size, X-Requested-With, If-Modified-Since, X-File-Name, Cache-Control but I don't see these in my headers. Using these, my PHP files aren't even reached (because they register no errors or anything), so it looks like it comes from the server only, but what do I know. Thanks in advance! Update Since no response header, Prashant seems to suggest it's a server issue in his error since it worked on another server. http://stackoverflow.com/questions/11953132/no-response-obtained-while-implementing-cors Anyone know how to flip this switch? Headers work now Bad litespeed format. Should look like this. Still being denied though. Header set Access-Control-Allow-Headers X-Requested-With Header set Access-Control-Allow-Methods OPTIONS Header set Access-Control-Allow-Methods GET Header set Access-Control-Allow-Methods POST Header set Access-Control-Allow-Headers Content-Type Header set Access-Control-Allow-Headers Depth Header set Access-Control-Allow-Headers User-Agent Header set Access-Control-Allow-Headers X-File-Size Header set Access-Control-Allow-Headers X-Requested-With Header set Access-Control-Allow-Headers If-Modified-Since Header set Access-Control-Allow-Headers X-File-Name Header set Access-Control-Allow-Headers Cache-Control

    Read the article

  • Oracle Access Manager 10gR3 Certified with E-Business Suite

    - by Keith M. Swartz
    Oracle Access Manager 10gR3 (10.1.4.3) is now certified for use with E-Business Suite Releases 11.5.10 and 12.1, using the new component, Oracle E-Business Suite AccessGate. For information on how to obtain, install, and configure this new component, see:Integrating Oracle E-Business Suite with Oracle Access Manager using Oracle E-Business Suite AccessGate (Note 975182.1) About Oracle Access Manager Oracle Access Manager is Oracle's next-generation identity and access management platform, and is a key component in Oracle's Fusion Middleware Identity Management solution. It provides a set of authentication and authorization features, including support for single sign-on authentication, and integration with other identity management offerings such as Oracle Identity Federation and Oracle Adaptive Access Manager.

    Read the article

  • CreateObject "Access.Application.10"

    - by Daniel
    I have two Access versions installed: Microsoft Access XP (aka 2002, aka version 10.0) Microsoft Access 2007 (aka version 12.0) Wenn I let an Application run in Microsoft Access XP and call Dim o As Object Set o = CreateObject("Access.Application.10") Debug.print o.version This returns 12.0 instead of 10.0! Solutions anybody? I don't get this.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >