Search Results

Search found 8358 results on 335 pages for 'external harddrive'.

Page 20/335 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Internal and external API architecture

  - by Tacomanator

  The company I work for maintains a successful SaaS product that grew "organically" over the years. We are planning to expand the line with a suite of new products that will share data with the existing product. To support this, we are looking to consolidate business logic into a single place: a web service layer. The WS layer will be used by: The web applications A tool to import data A tool to integrate with other client software (not an API per se) We also want to create an API that can be used by our customers that are capable of using it to create their own integrations. We are struggling with the following question: Should the internal API (aka the WS layer) and the external API be one in the same, with security and permission settings to control what can be done by who, or should they be two separate applications where the external API just calls the internal API like any other application? So far in our debate it seems that separating them may be more secure, but will add overhead. What have others done in a similar situation?

  Read the article

• Slow transfer to external USB3 hard drive

  - by JMP

  Trying to backup data from hard drive before reloading windows following some issue with its load. Having trouble with the file transfer to a USB3/2 external hard drive NTFS. Getting transfer speed of about 116.7kB/sec. In other words its taking about 5 hours to transfer 1.4GB. I've got about 80GB to go. So the transfer is going to take 11days. Seems a little on the slow side. Am I missing something? Is there a way to make this faster. No issue with the external drive transferring this amount in windows. But don't have that option at the moment.

  Read the article

• Port forward based on external IP (for VPS hosting)

  - by Ben Alter

  What I want to do is to host a VPS. First, I'd like to set up a static IP address that forwards to my home IP address (so I can have more than one IP coming into my house). How can I do this without contacting my ISP (and is it even possible?; I don't care about paying for something that does this). Once I have the extra external IP address, how can I forward it to my VPS? How is my router supposed to differentiate between two separate external IP addresses?

  Read the article

• Use Google Analytics to record newsletter clicks to an external website

  - by rlsaj

  Note: by external website I mean a website that we do not have access to the code. For example www.facebook.com I want to record how many social share clicks we have from our customer newsletters. For example, when a customer receives a newsletter they can click "Share this on Facebook" which shares the hosted version of the newsletter. If I wanted to record these newsletter clicks to our website I understand we'd use Google URL Builder (https://support.google.com/analytics/answer/1033867?hl=en) to create a UTM URL but because we're linking to an external site, how do we record this?

  Read the article

• Referencing external javascript vs. hosting my own copy

  - by Mr. Jefferson

  Say I have a web app that uses jQuery. Is it better practice to host the necessary javascript files on my own servers along with my website files, or to reference them on jQuery's CDN (example: http://code.jquery.com/jquery-1.7.1.min.js)? I can see pros for both sides: If it's on my servers, that's one less external dependency; if jQuery went down or changed their hosting structure or something like that, then my app breaks. But I feel like that won't happen often; there must be lots of small-time sites doing this, and the jQuery team will want to avoid breaking them. If it's on my servers, that's one less external reference that someone could call a security issue If it's referenced externally, then I don't have to worry about the bandwidth to serve the files (though I know it's not that much). If it's referenced externally and I'm deploying this web site to lots of servers that need to have their own copies of all the files, then it's one less file I have to remember to copy/update.

  Read the article

• How to disable integrated webcam and still be able to use an external one

  - by alikasundara

  I am looking for a way to disable the webcam that is integrated into my laptop. The webcam is using uvcvideo module but I do not want to blacklist it since it is also being used by an external webcam I have. Is there any way of disabling the device itself without touching the modules list? This is how the webcams are listed by lsusb. The first one is an integrated one (It is identified by some apps as BisonCam NB Pro), the second one is the external Logitech C525: Bus 002 Device 004: ID 5986:0361 Acer, Inc Bus 003 Device 002: ID 046d:0826 Logitech, Inc. I have already checked BIOS - there is no way of disabling the webcam from there. Besides I would love to learn how to disable the device by ID anyway. Thanks!

  Read the article

• External classes positions don't work?

  - by SystemNetworks

  I have an external class which reads the user's mouse clicks. I gave a position where the user have to click, and when the user clicks on that position, it would turn my boolean "mouse" to true. But when I connect that to my game(state based) class, it does not work. Here's the code: External class public void UI(Input input, GameContainer gc, float posX, float posY) { int x = Mouse.getX(); int y = Mouse.getY(); if(posX<=100 && posY<=100) { if(Mouse.isButtonDown(1)) { mouse = true; } } } Game class(main) public void update(GameContainer gc, StateBasedGame sbg, int delta) throws SlickException { int x = Mouse.getX(); int y = Mouse.getY(); civ.UI(input, gc, x,y); } The problem is when I click my mouse at posX<=100 && posY<=100. It does not work.

  Read the article

• Passing variable from SharePoint to external website

  - by TechDaddyK

  My company has a SharePoint site that is administered by the IT department (versus the Web Developer... go figure!). We have partnered with a vendor that has built a site for our staff to order customized stationery, etc. I need to create a link on the SharePoint site that will take the user to the external site but identify them individually. The vendor is suggesting this format: https://www.VENDORSITE.com/UI/Profile.hcf?id=a02b8106-4115-47cd-bca7-ce4dd447ef89&username=<user name>&password=<password>&name1=<first name>&name2=<last name>&email=<email> Here's the problem: I don't know how to pass that info, or even a single variable, from the SharePoint site to the external site. I would appreciate ANY suggestions.

  Read the article

• Changing read-write permissions on my external Seagate hard drive

  - by Anthony_JKenn

  I have an external hard drive (Seagate Free Agent) that I normally download files to. I have a dual boot Ubuntu 11.10 along with Windows 7-64 bit. I can read all of my files in my external HD perfectly, but when I attempt to do a download of a file to this drive, I get an "unable to write because of read only" disk error. When I attempt to change the permissions of the disk through the "Properties" bar, I still get an error that I don't have the proper permissions to change permissions. I have heard of "mounting" the disk, but I am afraid of mistakenly reformatting and destroying all the data that I have currently on that drive. How best should I safely change the permissions on that drive so that I can write and download files to the drive?? The drive is listed under /dev/sdc1.

  Read the article

• External Storage: The Apricorn Aegis Padlock Review

  Mix hardware encryption and a numeric keypad with a portable USB external hard drive and you get secure business files wherever you roam.

  Read the article

• Compiz features stopped working when an external monitor is attached

  - by adjfac

  Running 12.04 on a thinkpad T520 with nVidia NVIDIA Quadro NVS 4200M graphics. Just updated to the lasted nvidia 310 driver. Everything works great. However, as soon as I attached an external monitor using nvidia twinview, compiz features such as scale (moves all the active windows in one page) stopped working, as well as alt-tab to list all opened programs. Any ideas how i can fix this? never had this problem with 11.04. I can post my xorg.conf if that's of use to you. Thanks much! edit 1: I am using gnome3 classic edit 2: alt-tab works -- compiz application switcher (by default for gnome3 / unity) will crash gnome-classic, by changing to "static application switcher" in compiz seemed to solve the problem, but the scale still does not work when an external monitor is attached.

  Read the article

• External hdd boot entries added to GRUB after upgrade to 13.10

  - by Jason

  Long story short, I was using my laptop's internal HDD as an external one on my desktop, and I forgot to remove it when I was upgrading to 13.10. Now GRUB on my desktop has added entries for the Windows and Ubuntu partitions that exist on the laptop's HDD, but I don't want them to be there. Can I safely remove them ? My GRUB table looks like this if I recall correctly: Ubuntu Advanced Options (or something like this) Memtest Another Memtest Entry Windows 7 (loader) on /dev/sda1 Windows 7 (loader) on /dev/sdb1 Ubuntu 13.04 Advanced Options for Ubuntu 13.04 Where Windows 7 (loader) on /dev/sdb1 Ubuntu 13.04 Advanced Options for Ubuntu 13.04 are the entries from the external/laptop's HDD.

  Read the article

• Slow tranfer to external USB3 hard drive

  - by JMP

  Trying to backup data from hard drive before reloading windows following some issue with its load. Having trouble with the file transfer to a USB3/2 external hard drive NTFS. Getting transfer speed of about 116.7kB/sec. In other words its taking about 5 hours to tranfer 1.4GB. I've got about 80GB to go. So the transfer is going to take 11days. Seems a little on the slow side. Am I missing something? Is there a way to make this faster. No issue with the external drive tranferring this amount in windows. But don't have that option at the moment.

  Read the article

• Domain resolution - local first then external

  - by stefgosselin

  I would like to know how I can configure my dns settings so that domain is resolved locally first, then if not resolved it goes to external DNS. I had this working before, I am using Ubuntu through a VM and need the local domain to resolve first but since I have upgraded I had to reconfigure network and now it works only external, local host file does not seem to even be used. Is there an easy way to check this out? I did slap it up in google but no specific answer seemed to match my case and I too tight on delivery deadline to test-and-try different approaches. You guys rock, thanks.

  Read the article

• External device/USB support in android API level 10 [migrated]

  - by chandan

  I am an android UI developer and having problem with issue with USB and external storage device support on android. What I want to have is on plug-in USB/SD card, the storage items in the devices directly show up on screen. For example the modern Operating systems have this feature that we plug in our device and it just automatically shows the contents of the device on new window. I am implementing my UI on android API level 10 and my device is IMX reference kit which has android 2.3.4 installed. I would be grateful if anyone could give specif suggestion or guideline. I already tried with external_storage.java class. but it only says that the APK is installed successfully. But no action launches on plug-in external device.

  Read the article

• "Bootmgr is missing...." Upon reboot [closed]

  - by Gabe

  Possible Duplicate: Install/running ubuntu on extarnal HDD with a windows laptop? Ill take you through the steps I did. Sorry if this question has already been resolved, I'm new to Ubuntu and forums in general. I have 2 internal HDDs in my computer, both with Win7. One HDD is my mothers, the other is mine. I did this because she didn't want my games on her computer, and my PCs motherboard took a crap on me, so I set up a dual boot. I also have an external HDD. This is what I am trying to install Ubuntu 12.04 on. I formatted the drive by right clicking it, then selecting "Format". It is now in NTSF format. I downloaded the Windows installer, ran it, and selected "I:/" (my externl hdd) as the install location. The download and installation ran smoothly, and it gave me the reboot prompt. I selected "Reboot now" and my PC rebooted. I was then interrupted by the "Bootmgr is missing. Press CTRL + ALT + DEL TO REBOOT" message. NOTE: I would like to use my HDD for a FULL Ubuntu installation, not the Live (i think thats what its called). I want all my files and settings from Ubuntu saved to the External drive as if it was my only drive. If you need more information just ask. Any help would be appreciated. Thanks in advance.

  Read the article

• Repair BAD Sectors or Buy a new HDD?

  - by Nehal J. Wani

  I have a Seagate internal hard disk drive. I recently opened up my laptop [Dell Inspiron N5010] [Warranty has expired], cleaned it and it worked normally after waking up from hibernation. However, when I restarted it, it stuck on windows loading screen, then tried to boot from Dell recovery partition but failed. It gave the error: Windows has encounter a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred. While cleaning, I had mistakenly touched the round silvery thing at the bottom of the HDD. I don't know whether this has caused the problem or not. Since I have Fedora also installed in the same HDD, I can boot from it but it shows weird read errors when I ask it to mount Windows partitions. The disk utility also says that the Hard Disk has many bad sectors and needs to be replaced. I downloaded Seatools from Seagate website and used it. In the long test, I gave it permission to repair the first 100 errors which it did successfully. Now I am confused at what I should do. Internal Hard Disk Costs: a. Internal HDD 500GB Costs: Rs3518 b.1 External HDD 500GB Costs: Rs3472 b.2 External HDD 1TB Costs: Rs5500 c. Internal to External Converter Costs: Rs650 I have the following options: (i) Buy an External HDD, backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to buy another internal HDD and replace the damaged one. OR break the seal of the external one and put it inside my laptop as internal. Breaking the case involves risks. (ii) Buy a Internal HDD and an Internal to External Converter Case [Not very reliable], backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to just put in the new internal HDD I just bought. Experts, please guide me as to what will be the most VFM option? Also, if a HDD is failing, is it that I shouldn't read from it too otherwise there is a chance of other sectors failing? What I mean is, is it wrong to read from the HDD without taking backup first?

  Read the article

• RAID Volume is no longer showing in Raid Controller BIOS and in Windows

  - by Gordon

  Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. For their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

  Read the article

• How To Replace Laptop HDD Without Losing Data?

  - by Ishan

  Hello, I recently went to Dell Service center and they tell that HDD is faulty and needs to be replaced. I have a Studio 1457 laptop with 500 GB HDD and don't want to lose the data(purchased in May 2010, still under warranty). I have searched a bit and I think it may be best to use a disk imaging software for this task. However, I don't know about a good software. I have following steps in mind: Get a 1 TB External HDD. Make an image of existing 500 GB HDD and store data on external disk. Install new HDD and install a brand new Windows copy and then install the software on it. Using the same software I used to make image, restore the old HDD image on new one. However, I have some questions in mind. First, is this possible? Second, I live in a country where piracy is a big issue and I am sure the support executive who will come to change HDD will have a pirated copy. But I have genuine Windows 7 Pro and don't want to lose it. Now, Dell does not supply and OS disks, so I can't install it on new HDD! If I follow above steps, which version of Windows 7 will be retained? One in the image(authentic) or one in the new HDD(pirated). I am ready to purchase a good software for this task and my budget is $50-60. Since laptop is under warranty, new HDD will be free. One last thing, I have created a Windows Migration file whose size is 70 GB. Can it be used to move from Windows 7 Pro to Windows 7 Pro?(In case I get a genuine copy of Windows 7!) Any other method to save all the data? Thanks in advance.

  Read the article

• Volume is no longer showing in Raid Controller BIOS and in Windows

  - by Gordon

  Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. From their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

  Read the article

• Boot iMac into Centos from external hard drive

  - by user1704978

  I have Centos 6.3 installed on an external Western Digital drive with Firewire and USB interfaces. I want to be able to boot an iMac (2008, 3.06GHz Core 2 Duo) from this disk. The iMac has Mac OS X 10.5.8 and also a Window XP installation. I have tried holding 'T' on bootup for target disk mode but the external disk is ignored (presumably as it's not a Mac OSX image). I created an rEFit boot DVD which when booted in CD mode (holding 'C' on startup) displays three options, Mac OS (on internal drive), Linux and Windows. Selecting the Linux option unfortunately boots the Mac into XP. Three options are only displayed when the external disk is plugged into the Firewire port. If the external disk is plugged into a USB port the Linux option is not displayed and I can only boot into Mac OS X or Windows. This external disk will happily boot a Lenovo T410 laptop into Centos. My questions are: 1) Is it actually possible to boot into Centos on an iMac with an external hard drive. If so how do I achieve this? 2) Why is rEFit apparently booting from the wrong partition?

  Read the article

• How is made sure magnetic or electric fields from devices like transformers or fans close nearby do

  - by matnagel

  Fans and transformers which are inside the server case create magnetic and electric fields. Electric fields can be easily shielded, but what about magnetic fields, they can only be shielded with high cost materials like mu metal http://en.wikipedia.org/wiki/Mu-metal If a hard drive is installed too close to an intense transformer field, how is the magnetically stored information on the ferromagnetic surfaces of the disk kept safe? Even if drives are shielded, where are the limits? Is there some technical investigation or recommendation from manufacturers about this? (I never heard about something and never had any problem but I am interested in some facts. This is much preferred over what you believe or a habit you developed. Please try to give some solid infromation.) I have built and repaired many servers and sometimes I did put the harddrive on top of the power supply. Edit: This question is not about frequencies that could affect the drive via the power or data connectors of the drive, those are electronically decoupled and that's another question. Edit 2: The wikipedia page states that the motor inside the drive is shielded with mu metal. It is obvious that manufactureres have to take care of this. This question is about such influences from outside the drive.

  Read the article

• centos 6.3 kvm external ip forwarding to guests

  - by user1111702

  I have a centos 6.3 server with kvm installed. The server has 4 external ips and one NIC. 176.9.xxx.xx1 176.9.xxx.xx2 176.9.xxx.xx3 176.9.xxx.xx4 I use the following configuration ifcfg-eth0 as slave to ifcfg-br0 the configuration in ifcfg-eth0 is DEVICE=eth0 ONBOOT=yes BRIDGE=br0 HWADDR=14:da:e9:b3:8b:99 and in the ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=static BROADCAST=176.9.xxx.xxx IPADDR=176.9.xxx.xx1 NETMASK=255.255.255.0 SCOPE="peer 176.9.xxx.xxx" and I have 3 more aliases for br0 , br0:1 to get the trafic from the second external ip DEVICE=br0:1 IPADDR=176.9.xxx.xx2 NETMASK=255.255.255.248 ONBOOT=yes br0:2 to get the trafic from the third external ip DEVICE=br0:1 IPADDR=176.9.xxx.xx3 NETMASK=255.255.255.248 ONBOOT=yes br0:3 to get the trafic from the second external ip DEVICE=br0:1 IPADDR=176.9.xxx.xx4 NETMASK=255.255.255.248 ONBOOT=yes The above settings work fine and I recieve the trafic from all the external ips. My problem is that I want to pass the trafic from external ip to specific virtual guest on my server. ie trafic that comes from 176.9.xxx.xxx2 must pass to virtual machine 1 176.9.xxx.xxx3 must pass to virtual machine 2 176.9.xxx.xxx4 must pass to virtual machine 3 Can you please help me how to achieve this ? What are the settings on the host and what should I do to the guests. Thank you in advance

  Read the article

• Excel macro to change external data query connections - e.g. point from one database to another

  - by Rory

  I'm looking for a macro/vbs to update all the external data query connections to point at a different server or database. This is a pain to do manually and in versions of Excel before 2007 it sometimes seems impossible to do manually. Anyone have a sample? I see there are different types of connections 'OLEDB' and 'ODBC', so I guess I need to deal with different formats of connection strings?

  Read the article

• No-argument method on window.external is invoked when checking with typeof

  - by janko

  Hi, I am trying to display an HTML page with embedded JavaScript code inside a System.Windows.Forms.WebBrowser control. The JavaScript code is expected to interact with the embedding environment through the window.external object. Before invoking a method on window.external, JavaScript is supposed to check for the existance of the method. If it is not there, the code should invoke a generic fallback method. // basic idea if (typeof(window.external.MyMethod) != 'undefined') { window.external.MyMethod(args); } else { window.external.Generic("MyMethod", args); } However, checking for a no-argument method with typeof seems to invoke the method already. That is, if MyMethod accepts any positive number of arguments, the code above will work perfectly; but, if MyMethod is a no-argument method, then the expression typeof(window.external.MyMethod) will not check for its type but invoke it, too. Is there any work-around to this behavior? Can I somehow escape the expression window.external.MyMethod to prevent the method call from occurring?

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >