Search Results

Search found 1317 results on 53 pages for 'martin berger'.

Page 20/53 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Best technique for reusing a Windows system image across configurations

  - by Martin Wiboe

  We are a small company that provides solutions for ventilation systems. Part of the solution is a "controller" which communicates with the ventilation equipment. These controllers are simply Dell computers that come with our Windows 7 system image on them and sometimes some special hardware. We typically do a batch of 10 controllers at a time. We have been using Norton Ghost to apply the system image, but this process breaks because Dell changes the system configuration often, and our Windows image now does not contain the correct drivers. This is especially a problem when they change the RAID controller. To improve this, I see 2 options: use some kind of virtualization and install a hypervisor on each PC. This would solve the driver problem, but probably cause trouble with our special hardware. use some method of adding the proper drivers to our Windows image in offline mode. I haven't got much experience in either of these approaches. How would you solve our problem?

  Read the article

• Directly printing to remote CUPS/IPP server on Snow Leopard

  - by Martin v. Löwis

  I need to use Kerberos authentication when printing from my OSX machine, however, the machine itself does not have a service account in active directory, so the KDC will not issue a delegation ticket for the local CUPS installation. I think printing could work if the printing framework would directly print to the network CUPS server (or even to the Windows print server), bypassing the local CUPS. Is it possible to setup printing so that it directly accesses the remote print server? (asking for a service ticket for that server would succeed)

  Read the article

• Ethernet 802.1x client -> WiFi AP on a Raspberry Pi?

  - by Martin Janiczek

  I have an Ethernet connection that requires 802.1x authentication (TTLS, MSCHAPv2, name+password). My goal is to connect that to something that would then act as an WiFi AP, so I can use the connection on more devices (iPhone, notebook, etc.) Would it be possible/good idea to use Raspberry Pi for this purpose? Or are there better-suited devices to do this? EDIT: found some alternatives but because of low rep can't post more than two links... OpenWRT + wpa_supplicant guide Carambola - works with OpenWRT (but probably not standalone?) Hornet-UB - works with OpenWRT Asus RT-N10+ + OpenWRT how-to

  Read the article

• Can I make Thunderbird load different email accounts one after the other instead of all at the same

  - by Martin

  I use Thunderbird 3 on Vista. I use it for 3 POP accounts. When I start work in the morning, all three accounts are checked at the same time, and all emails are being loaded simultaneously. I think Thunderbird is quite slow in general, and this behaviour makes it even worse. At least it makes me feel so. Can I tell Thunderbird to check the accounts and load the emails one after the other?

  Read the article

• Is it possible for the Subversion Apache module to serve html files with an html content-type without using the svn:mime-type property?

  - by Martin Pain

  I am aware that if you set the svn:mime-type Subversion property on a .html file to text/html then when viewing the file in a browser through the Subversion module in Apache httpd it will be served with a Content-Type: text/html header, enabling the browser to render it as HTML rather than plain text. However, I am looking for a way to do this without using the svn:mime-type property. I'm aware that you can configure your svn client to automatically add the property - this is not what I want, as I do not want to ensure all users have these settings. I'm also aware that I could create a pre-commit hook that rejects the commit if the properties are not set, in order to force users to set the property - I might fall back to that, but I'm looking for something less intrusive. I'm also aware that I could use a post-commit hook to add the properties automatically on the server-side. I'd rather not do that (as users then have to update immediately after their commit, and it's not trivial to write) - I'm looking for a better alternative. Perhaps something with rewrite rules in the Apache server?

  Read the article

• Free or very Cheap VPN server software with high concurrent users count

  - by Martin KS

  I'm hoping to implement a VPN whereby about 200 concurrent users can log in to briefly access my network. I had a look at OpenVPN and this seemed excellent, but was hoping that there would be a less costly option on a per-concurrent-user basis. I've no need for particularly strong security, and my only other requirement is that I would need to be able to add users in bulk via csv or similar. Does anyone have any suggestions?

  Read the article

• Apache rewrite rule to remove index.php and direct certain areas to https

  - by Stephen Martin

  I have a codeignitor application running on Apache2, I have managed to remove the index.php from the urls with this .htaccess RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule .* index.php/$0 [PT,L] now I want to make certain parts of the site redirect to https, I tried this: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule .* index.php/$0 [PT,L] RewriteRule ^/?cpanel/(.*) https://%{SERVER_NAME}/cpanel/$1 [R,L] RewriteRule ^/?login/(.*) https://%{SERVER_NAME}/cpanel/$1 [R,L] But it doesn't work. I have to say when it comes to Apache rewrites im a noob. I can't find any tutorials on how to remove index.php and rewrite/redirect certain parts of the site to https. Any ideas, Thanks.

  Read the article

• Configuring sendmail to use one outbound MTA exclusively

  - by Charlie Martin

  I have a sendmail problem, and I'm anything but a sendmail guru -- I could use some help. My problem is that I have a system intended to be more or less an "appliance" -- it's not intended to have an admin. Because of this, it needs to be able to "call home" by sending email. As we have configured it, this works fine -- using sendmail, it finds the appropriate relay by looking up an MX record and everything works fine. Now, however, because of security concerns, we want to limit it to using exactly one relay, so for example relay.corp.example.com. Should the user configure it to use, say, fubar.example.com, the mail sending should fail or be deferred. I thought that by configuring sendmail with a /etc/mail/server.switch file containing hosts files without dns, I'd get that effect. This doesn't work -- instead, if it gets mail addressed to [email protected], it tries to talk directly to example.com, and ignores the configured server. Any ideas?

  Read the article

• MediaPortal crash when scanning my TV Channels

  - by Martin Ongtangco

  I tried installing MediaPortal on my old system. I installed & tried both beta & stable releases: Here's the old system specs: Windows XP SP3 512MB DDR 80GB IDE K-World PVR-TV7131 Analog TV-Tuner Inno3d FX5500 128MB 64bit When scanning through the TV-Server, it crashes. I don't know if the incompatibility comes from the hardware or the OS, but my TV Tuner's own Media center app works well. For now, that's what im using. Anyone here familiar with MediaPortal? Thanks!

  Read the article

• Ethernet 802.1x client -> WiFi AP on a Raspberry Pi?

  - by Martin Janiczek

  I have an Ethernet connection that requires 802.1x authentication (TTLS, MSCHAPv2, name+password). My goal is to connect that to something that would then act as an WiFi AP, so I can use the connection on more devices (iPhone, notebook, etc.) Would it be possible/good idea to use Raspberry Pi for this purpose? Or are there better-suited devices to do this? EDIT: found some alternatives but because of low rep can't post more than two links... OpenWRT + wpa_supplicant guide Carambola - works with OpenWRT (but probably not standalone?) Hornet-UB - works with OpenWRT Asus RT-N10+ + OpenWRT how-to EDIT 2: probably going to try TP-LINK TL-WR740N. It's a classic router, but can be flashed with OpenWRT, and the price beats everything else I've seen.

  Read the article

• Remote Desktop Software - TeamViewer comparison?

  - by Martin

  Preliminary Note: After reading what I wrote below, I would like to stress that this ain't a TeamViewer ad. It's just that all other tools that I checkked online seem to miss one feature or the other. :-) OK, so I'm currently trying to get a picture of available solutions for remote desktop software. I have found (through personal usage) that TeamViewer pretty much ticks all boxes that I personally would want from any remoting tool. (Specifically it's setup is amazingly trivial.) It supports a wide range of platforms and it's even free for private use, so I'm really quite OK with it. I would be interested if anyone knows of other tools that ticks as many boxes as TeamViewer seems to do.

  Read the article

• Changing the Start Menu Power Button - Setting does not work: only (Shut down) is available

  - by Martin

  This is the second time I try to change this setting on a Vista based OS and I can't get it to work again. OS: Windows Server 2002 SP2 (not R2) = Microsoft Windows [Version 6.0.6002] = Vista When I go to: Power Options - Change Plan Settings - Change advanced power settings - Power buttons and lid - Start menu power button - Setting: the available combo box will only show the option Shut down. No other options are available. This server is part of a domain and has not been set up by me. I have not yet talked with the domain admin, but as far as I could tell from googling, only Win7 has group policy options for the start menu. (And yes, OC I will talk to the domain admin to see if he has any clue - which I doubt.) (Edit: I have now talked to our domain admin, and he's got no clue either.) I'm responsible for this server and a local administrator but not a domain administrator. I switched off User Account Control (UAC) yesterday without problems. Since I always log into this machine via RDP and this being a server, the natural choice would be the option (Log out) and not (Shut down). What can I do to fix it or to find out why it cannot be changed? Thanks!

  Read the article

• Increase the compression performance of VPN

  - by Martin

  I am currently switching from a system with HPN-SSH tunnels and enabled compression to something VPN based. I have tried tinc and n2n so far, hamachi requires a library I do not have. In my primitive benchmarks I am not satisfied with the achievable bandwidth compared to the SSH tunnels. In tinc the low LZO setting performed best, but compression is only available in UDP mode. Ideally I would like to have a TCP-based VPN with a multi-threaded compression. Can you suggest me some ideas how to increase the performance? Would it be possible to somehow put a compression filter in front of the tun interface? Or are there any VPN implementations that might be better suited for my needs (fast compression, TCP-based, switch mode, does not have to be super-secure)? I would consider tunnelling Ethernet over SSH, but according to some articles it is not advisable.

  Read the article

• How do I extract files from one tarball to another tarball in one step?

  - by Martin

  I have some fairly large tarball archives, from which I need to extract some files. I will later repack those files to transfer them to another server. Currently that is a two (multi) step process for me: mkdir ttmp tar -vxzf large.tgz -C ttmp/ --strip-components=<INT> <folder-to-be-extracted> or alternatively with wildcards mkdir ttmp tar -vxzf large.tgz -C ttmp/ --strip-components=<INT> \ --wildcards --no-anchored '*pattern*' Then I go ahead and recompress the created folder tar -vczf small.tgz ttmp/* rm -rf ttmp How can I combine these two commands into one? Like this tar -x large.tgz > tar -c small.tgz Just to show, what I already tried: Whenever I search the terms "extract" I will end up here or here or even here. When I use the term "split" I will end up here and that is definitely not what I intend to do. When I use "repack" I end up in strange places.

  Read the article

• Nginx: Disallow index.html in URL

  - by Martin Vilcans

  We're generating a site consisting of only static files (using Assemble). Having the .html extension on URLs looks so nineties, so we generate every static HTML file in its own directory and call it index.html. For example, the url http://www.example.com/foo/bar/ is in the file /var/www/foo/bar/index.html. This works well, but there is one small thing nagging me: Now there are two possible URLs to the same resource: http://www.example.com/foo/bar/ (slash URL) http://www.example.com/foo/bar/index.html (index.html URL) By accident someone may link to the index.html form of the URL, which is bad for SEO and looks ugly (remember the nineties?). Is it possible in Nginx to give a 404 error on the index.html URL, but serve the slash URL? I tried this: location ~ /index\.html$ { return 404; } But it seems that Nginx does some internal rewrite of the slash URL to the index.html URL, and then matches this location so we get a 404 even on the slash URL. Note that to catch mistakes, we want index.html URLs to be an error, not just redirect to the slash URL.

  Read the article

• iptables - drop all HTTP(S) traffic but from CloudFlare

  - by Martin

  I would like to allow only HTTP(S) traffic coming from CloudFlare. In that way attackers cannot attack the server directly. I know CloudFlare is not mainly a DDoS mitigator, but I would like to try it either way. I'm currently only having access to iptables (ipv4 only), but will try to install ip6tables soon. I just need to have this fixed soon. (we're getting (D)DoSed atm.) I was thinking about something like this: iptables -I INPUT -s <CloudFlare IP> --dport 80 -j ACCEPT iptables -I INPUT -s <CloudFlare IP> --dport 443 -j ACCEPT iptables -I INPUT -p tcp --dport 80 -j DROP iptables -I INPUT -p tcp --dport 443 -j DROP I know that CloudFlare has multiple IPs, but just for an example. Would this be the right way?

  Read the article

• How to get back the themes feature in Windows XP?

  - by Martín M.

  When I try to set a visual style in Windows XP (the standard Luna, for example), I get one of these two: "Access denied" error. It works, but when I restart the computer, I get the Classic look again, with no errors. Also, the "Windows and icons" dropdown is grayed out in the "Appearance". This is a list of things I have tried, with no results: Making sure "Use visual styles on windows" is checked on System Properties Advanced Performance. Restarting the "Themes" service. It starts cleanly, no errors. Applying these two fixes: Kelly's Corner and tweaks.com. Running sfc /scannow and checking the integrity of uxtheme.dll against a clean installation of XP Restoring the whole \Windows\Resources\Themes directory. Creating a new user. The new user does not seem to suffer this problem. Maybe this is the solution, create a new user and migrating all the data, but it would be a pain, and I would prefer reinstalling the whole thing. I am using Windows XP Professional SP3, with no spyware, no virus, and no other visible malfunctions. How can I fix this?

  Read the article

• Wrong chrome full screen resolution with multiple displays

  - by Martin

  I am using Google Chrome on Windows 7 64bit with two displays. The displays have different resolutions and aspect-ratios. My problem is best visible when playing back full-screen videos from a flash player inside chrome (but it is not flash related). The maximum size is calculated from the primary displays' resolution, even when the relevant window is maximised on the second screen. The problem is also visible on websites that set the width to 100%. The 100% then apply to the primary display, even when the window is opened on the secondary display. Are there any known solutions to this problem? I am observing it since many Chrome versions, do not know if it has been ever correct.

  Read the article

• Looking for whole damaged laptops? Where I can find in good price?

  - by Martin

  Looking for whole damaged laptops? Where I can find in good price? Qty per month about 50-250 depends on price and configurations.

  Read the article

• How to set up a PC which can be booted from Linux AND Windows?

  - by Martin

  Our PC was running Windows XP up to know. It has become incredibly slow and I'm considering switching to Linux (Ubuntu?!) as a fresh OS. However, there are some applications we rarely use which run only on Windows and I also want to have the possibility to easily go back to the old system, if I should find during testing linux, that anything is missing or not available. So the idea is to install Linux on a new (second) hard drive and use the existing Windows XP from a virtual machine (converted by Paragon Drive Backup) in the transition time. We have a lot of data on the PC, tens of GBs of Photos (managed by Picasa), ... My questions: What could be the best way to setup the new hard drive? (Partitions) I assume that I can not access the Linux data from Windows but I could access (read/write) windows drives from Linux? Does anyone know good tutorials for this use case? What other things might I have to consider for transition Windows-Linux?

  Read the article

• Discover the public ip of a network without being connected

  - by Martin Trigaux

  Let say, I'm next to a network and can see the traffic (with airodump or similar tool) but can not decipher it (because I am not connected on the network). Is it possible to discover the public ip address of the network ? I know the MAC address of the users connected on the network but do I know the one of the router ? If yes, maybe there is a way to do the matching. I know IP addresses are not forever but some addresses are static and never change. Maybe there is a database of MAC address having recorded that. Google has a database that match MAC address and geographical coordinates so why not with IP addresses ? Other idea, if I know where am I, I can maybe guess the IP range used in the city by the ISP (is it findable ?) and then try to "ping" each IP on the range (if it is a /24, it's possible, even /16 maybe). Will I get some information like the MAC of the box or see some traffic on the network ? These are two ideas I had. I don't know if they are doable, certainly not perfect. Do you think of some others ? By trying several methods, maybe I can get a guess with a bit of luck. Thank you

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• Excel or Access: how to group several lines in a table and insert contents in columns? ("split column")

  - by Martin

  I have a table containing data of sold products (shown in the example on the left): Columns: Number of the order Product Name Attribute - specifies what is given in the following field "value", e. g. Customer Name or Product Variant Value - is the value of the Attribute Count - is the number of products of this variant sold in the order That means: Product B has 2 variants "c" and "d" Note that in Order 1 Product B was sold in Variant d only, because the letter "N" in field "D4" means "none". Note, that in OrdnerNo 3 Product B was sold only in Variant c, because for Variant d field "D9" is "N"!! This is confusing, but it is the structure of the original data (which I can not change). I need a way to convert the table on the left in a table like that on the right: one line for each product type Order Number Product Name Customer Name Count (number of products sold in this order) Variant - this is the problem, as it has to be filled with the So all rows with the same OrderNo and same product have to be grouped in to one, and I hope it is clear what I need. I tried to do it with Pivot Tables, but that fails, as the Count is always in each line, no matter if it has Value "N" or not and for the products without variants there is only one line for each order, however for products with variants there are several... So how could I create the right table with a VBA macro in MS Excel or maybe there is a trick in MS Access to do it directly or with an SQL query?

  Read the article

• Linux Mint on VirtualBox has no internet connection

  - by Martin

  Physical machine: Mac Mini running OSX 10.7.5 Virtual machine: Linux Mint 15 Cinnamon 64-bit Using VirtualBox. I am trying to make the linux connect to the internet. For some reason I can access the host computer with 192.168.2.100. Its set up to show me a web-page that says "It works". This I can see from the linux. But I cannot reach anything on the internet. Either FireFox says "Unable to connect" or when I run nslookup google.com I get connection timed out; no servers could be reached. My setting on VirtualBox under the Network tab are: Bridge Adapter vnic0 promiscouos Mode:Allow All`. If it makes a difference, the host has a WiFi connection to the home router. What have I missed?

  Read the article

• virtual web folder served by PHP script

  - by Martin

  I am trying to configure my apache to be able to display (virtual) pages like: mywebpage.com/something1 mywebpage.com/something2 mywebpage.com/folder/something3 I would like these "somethingX" and "folder" folders to be only virtual, not physical directories. For a start it would be great to send all requests to mywebpage to one PHP script which will somehow receive the original path information (there is some SERVER array as far as I know) and call necessary PHP functions (so far I use addresses like mywebpage.com/index.php?page=blabla&otherparameters=values...). Is that possible? I am struggling with different combination, currently I am with following file in /etc/apache2/conf.d/something.conf (not working of course). What is the correct way to proceed? Thanks. <Location /myweb> SetHandler my-handler Action my-handler /srv/www/htdocs/myweb/product.php virtual </Location> My pages are in /srv/www/htdocs/myweb. I tried with Location, with Directory, with Action and SetHandler, with AddHandler... ;-) Some configurations were ignored, some caused "object not found" with nothing relevant in error log.

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >