Search Results

Search found 111890 results on 4476 pages for 'git update server info'.

Page 2002/4476 | < Previous Page | 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009  | Next Page >

  • django, mod_wsgi, MySQL High CPU - Problems

    - by Red Rover
    Good Evening, and thank you for reading this post. I am having a problem with Django after migrating the dB from SQLlite to MySQL. Initially, for the first 48hours, all ran well. But now we are experiencing high cpu about every 30 minutes. This is a production ESX4i VM host, with 2 x 2.8 ghz CPUs and 12 GB ram. I have allocated 4 cpu's to this VM and 4 GB memory. Any insight into this configuration and help with the spikes in CPU would be appreciated. IT is configured to use the prefork MPM. Outlined are the config's for the different services: MySQL Server version: 5.1.61 Source distribution Django 1.3 mod_wsgi Apache/2.2.15 httpd.conf Timeout 120 KeepAlive Off MaxKeepAliveRequests 400 KeepAliveTimeout 3 prefork MPM StartServers 8 MinSpareServers 8 MaxSpareServers 16 ServerLimit 40 MaxClients 40 MaxRequestsPerChild 0 worker MPM StartServers 16 MaxClients 1024 MinSpareThreads 64 MaxSpareThreads 256 ThreadsPerChild 64 MaxRequestsPerChild 10240 MySQL my.conf [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql symbolic-links=0 [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid my.cnf wsgi.conf LoadModule wsgi_module modules/mod_wsgi.so /etc/httpd/conf.d/wsgi.conf WSGISocketPrefix /var/run/wsgi WSGIPythonEggs /var/tmp WSGIDaemonProcess SITE maximum-requests=10000 WSGIProcessGroup SITE

    Read the article

  • Why is my RapidSSL Certificate chain is not trusted on ubuntu?

    - by olouv
    I have a website that works perfectly with Chrome & other browser but i get some errors with PHP in CLI mode so i'm investigating it, running this: openssl s_client -showcerts -verify 32 -connect dev.carlipa-online.com:443 Quite suprisingly my HTTPS appears untrusted with a Verify return code: 27 (certificate not trusted) Here is the raw output : verify depth is 32 CONNECTED(00000003) depth=2 C = US, O = GeoTrust Inc., CN = GeoTrust Global CA verify error:num=20:unable to get local issuer certificate verify return:1 depth=2 C = US, O = GeoTrust Inc., CN = GeoTrust Global CA verify error:num=27:certificate not trusted verify return:1 depth=1 C = US, O = "GeoTrust, Inc.", CN = RapidSSL CA verify return:1 depth=0 serialNumber = khKDXfnS0WtB8DgV0CAdsmWrXl-Ia9wZ, C = FR, O = *.carlipa-online.com, OU = GT44535187, OU = See www.rapidssl.com/resources/cps (c)12, OU = Domain Control Validated - RapidSSL(R), CN = *.carlipa-online.com verify return:1 So GeoTrust Global CA appears to be not trusted on the system (Ubuntu 11.10). Added Equifax_Secure_CA to try to solve this... But i get in this case Verify return code: 19 (self signed certificate in certificate chain) ! Raw output : verify depth is 32 CONNECTED(00000003) depth=3 C = US, O = Equifax, OU = Equifax Secure Certificate Authority verify error:num=19:self signed certificate in certificate chain verify return:1 depth=3 C = US, O = Equifax, OU = Equifax Secure Certificate Authority verify return:1 depth=2 C = US, O = GeoTrust Inc., CN = GeoTrust Global CA verify return:1 depth=1 C = US, O = "GeoTrust, Inc.", CN = RapidSSL CA verify return:1 depth=0 serialNumber = khKDXfnS0WtB8DgV0CAdsmWrXl-Ia9wZ, C = FR, O = *.carlipa-online.com, OU = GT44535187, OU = See www.rapidssl.com/resources/cps (c)12, OU = Domain Control Validated - RapidSSL(R), CN = *.carlipa-online.com verify return:1 Edit Looks like my server does not trust/provide the Equifax Root CA, however i do correctly have the file in /usr/share/ca-certificates/mozilla/Equifax...

    Read the article

  • Virtual bridged networking with VLAN, could not ping

    - by v.yegy
    I require a virtual network with VLAN be build between two virtual hosts - which can be (lxc/ vbox -ubuntu or win xp). I tried with lxc and vbox with Ubuntu and was finding difficult to make it work without vlan, but was successful with vbox with xp. vbox-xp1 --- br1 ---------------- br2 ---- vbox-xp2 The config is: brctl addbr br1; brctl addbr br2 ifconfig br1 up; ifconfig br2 up stp br1 off; stp br2 off ip link add name br1-br2-l0 type veth peer name br1-br2-l1 sudo brctl addif br1 br1-br2-l0 sudo brctl addif br2 br1-br2-l1 vbox - xp 1 and 2 with network ; bridged and br1 and br2 respectively. The adapter is intel PRO/1000 MT Server and driver installed in guests. Configured IPs and two hosts pinged! VLAN config: ip link add link br1 name br1-2.5 type vlan id 5 brctl addif br2 br1-2.5 create vlan 5 in xp 1 and 2 and assign ip address Ping on with this config does not work. Wireshark trace on interface br1-br2-l1 / br1-2.5 shows that one ping results in ~240 ping packets and each growing by 4 bytes - first one being correct and 60, ping does not reach other host as I see mac is not learnt[arp -a]. -- if br1-2.5 is not configured, I see untagged packets in br1-br2-l1/0, but still not reaching other host as mac is not learnt. if br1-br2-l0/1 is made down, even if br1-2.5 is up, I count not see any packets. I tried with ebtables, but still could not make a correct config to work. -- If any one here are aware of any configuration, please let me know. I need to make a network of switches. Seems I have a very long way. Sorry for a very long question. Thanks and regards, vy

    Read the article

  • Ubuntu raid 1 write errors

    - by Micah
    I have an Ubuntu server set up with two SATA drives in a RAID 1 configuration with MDADM. The machine is used to record raw video, which involves a lot of writing to the disk. Sometimes during video recording the computer will crash, will the following errors in kern.log: Mar 15 10:39:41 video kernel: [414501.629864] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 Mar 15 10:39:41 video kernel: [414501.629870] ata2.00: BMDMA stat 0x26 Mar 15 10:39:41 video kernel: [414501.629875] ata2.00: SError: { UnrecovData Handshk } Mar 15 10:39:41 video kernel: [414501.629880] ata2.00: failed command: WRITE DMA EXT Mar 15 10:39:41 video kernel: [414501.629889] ata2.00: cmd 35/00:00:28:6d:f6/00:04:06:00:00/e0 tag 0 dma 524288 out Mar 15 10:39:41 video kernel: [414501.629891] res 51/84:b1:77:6e:f6/84:02:06:00:00/e0 Emask 0x30 (host bus error) Mar 15 10:39:41 video kernel: [414501.629896] ata2.00: status: { DRDY ERR } Mar 15 10:39:41 video kernel: [414501.629899] ata2.00: error: { ICRC ABRT } Mar 15 10:39:41 video kernel: [414501.629910] ata2.00: hard resetting link Mar 15 10:39:41 video kernel: [414501.973009] ata2.01: hard resetting link Mar 15 10:39:41 video kernel: [414502.482642] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 15 10:39:41 video kernel: [414502.482658] ata2.01: SATA link down (SStatus 0 SControl 300) Mar 15 10:39:41 video kernel: [414502.546160] ata2.00: configured for UDMA/133 Mar 15 10:39:41 video kernel: [414502.546203] ata2: EH complete Is this the result of faulty drives? Is software RAID just not performant enough for data rates ~15 MB/s, even with a quad-core i7? Thanks for your help. Edit: cat /proc/mdstat returns this: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdb1[1] sda1[0] 976760768 blocks [2/2] [UU] unused devices: <none>

    Read the article

  • htaccess not properly rewriting urls

    - by Cameron Ball
    This is a bit of a weird one. I'm doing some work on a server, and I need rewrite rules for directories that actually exist (in some cases, they are more than one level deep) At the moment my .htaccess looks like this: RewriteEngine on RewriteRule ^simfiles/([-\ a-zA-Z0-9:/]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] And this is working OK, for example, a url like: mydomain.com/sifmiles/my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files Or in the case of a directory structure that is deeper than one level: mydomain.com/sifmiles/my-files/more-of-my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files/more-of-my-files I wrote the regex so that it won't match things with a . in the path, because there are css and js files which reside in simfiles/somedirectory, and if I redirect everything then these cannot be loaded. I tried a configuration like this: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^simfiles/([-\ a-zA-Z0-9:/\.]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] But that doesn't work, things still don't load properly. So my first question is, how can I achieve this "properly"? I don't like my solution because it means redirects won't occur if the folder has a . in its name. My second problem, is that while the redirection is happening properly, the url becomes: http://mydomain.com/?portal=simfiles&folder=my-files I want the URL to remain clean, like: http://mydomain.com/sifmiles/my-files How can I achieve this?

    Read the article

  • Exim 4 Virtual Domains and Catchall on Debian (Squeeze)

    - by parazuce
    Hello, I've been at it for about 4 hours now. Searching as well as trying different tutorials. Here's my setup: I have 2 domains, both under my own DNS server (MX records setup as well). I have exim4 successfully running, and it is able to send messages from both of those domains. I have tested this using sendmail, and manually setting the "From" attribute. Exim successfully delivers mail to users no matter which domain was specified. I'm fine with that, but I'm having an issue editing virtual domains, and adding custom delivery options (such as a catch all). I've been searching for about 4 hours, and I can't find any up-to-date documentation on how to do this. The old methods would be to add a line such as: domainlist local_domains = @:localhost:dsearch;/etc/exim4/virtual Once that line was added, I made a directory at /etc/exim4/virtual, then created files inside such as example.com which would then contain rules for delivery under that domain. This did not work, however. Searching further, I've found that exim no longer supports dsearch (I guess because they claim it never has?) This is where I'm stuck. I'm on a "split" configuration as well.

    Read the article

  • Why is mkfs overwriting the LUKS encryption header on LVM on RAID partitions on Ubuntu 12.04?

    - by Starchy
    I'm trying to setup a couple of LUKS-encrypted partitions to be mounted after boot-time on a new Ubuntu server which was installed with LVM on top of software RAID. After running cryptsetup luksFormat, the LUKS header is clearly visible on the volume. After running any flavor of mkfs, the header is overwritten (which does not happen on other systems that were setup without LVM), and cryptsetup will no longer recognize the device as a LUKS device. # cryptsetup -y --cipher aes-cbc-essiv:sha256 --key-size 256 luksFormat /dev/dm-1 WARNING! ======== This will overwrite data on /dev/dm-1 irrevocably. Are you sure? (Type uppercase yes): YES Enter LUKS passphrase: Verify passphrase: # hexdump -C /dev/dm-1|head -n5 00000000 4c 55 4b 53 ba be 00 01 61 65 73 00 00 00 00 00 |LUKS....aes.....| 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000020 00 00 00 00 00 00 00 00 63 62 63 2d 65 73 73 69 |........cbc-essi| 00000030 76 3a 73 68 61 32 35 36 00 00 00 00 00 00 00 00 |v:sha256........| 00000040 00 00 00 00 00 00 00 00 73 68 61 31 00 00 00 00 |........sha1....| # cryptsetup luksOpen /dev/dm-1 web2-var # mkfs.ext4 /dev/mapper/web2-var [..snip..] Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done # hexdump -C /dev/dm-1|head -n5 # cryptsetup luksClose /dev/mapper/web2-var 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00000400 00 40 5d 00 00 88 74 01 66 a0 12 00 17 f2 6d 01 |.@]...t.f.....m.| 00000410 f5 3f 5d 00 00 00 00 00 02 00 00 00 02 00 00 00 |.?].............| 00000420 00 80 00 00 00 80 00 00 00 20 00 00 00 00 00 00 |......... ......| # cryptsetup luksOpen /dev/dm-1 web2-var Device /dev/dm-1 is not a valid LUKS device. I have also tried mkfs.ext2 with the same result. Based on setups I've done successfully on Debian and Ubuntu (but not LVM or Ubuntu 12.04), it's hard to see why this is failing.

    Read the article

  • WS2008 NTP - Using time.windows.com,0x9 - Time always skewed forwards

    - by David
    I have a domain controller configured to use time.windows.com (with 0x09 flags set). I've noticed that frequently the systems' clock is fast - it varies from 10 minutes to even 45 minutes. I always have to keep resetting the system date/time back to what it should be. When I run "w32tm /query /source" it tells me it's using time.windows.com, and obviously I trust Microsoft not to serve incorrect times, but why is my server's clock fast? EDIT: There are a few Time-Service events in the System log: Event ID: 142 Message: The time service has stopped advertising as a time source because the local clock is not synchronized. Event ID: 139 Message: The time service has started advertising as a time source. These two messages appear in pairs every hour or so. Event 142 appears 14 to 16 minutes after 139 appears. Going back a few months, these events appear: Event ID: 35 Message: The time service is now synchronizing the system time with the time source time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123-65.55.21.21:123). Event ID: 37 Message: The time provider NtpClient is currently receiving valid time data from time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123-65.55.21.21:123). Event ID: 47 Message: Time Provider NtpClient: No valid response has been received from manually configured peer time.windows.com,0x9 after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a new peer with this DNS name. The error was: The time sample was rejected because: The peer is not synchronized, or it has been too long since the peer's last synchronization. These three events only appear once in the log, back in October.

    Read the article

  • different nmap results

    - by aasasas
    Hello I have a scan on my server form outside and from inside, why results are different? [root@xxx ~]# nmap -sV -p 0-65535 localhost Starting Nmap 5.51 ( http://nmap.org ) at 2011-02-16 07:59 MSK Nmap scan report for localhost (127.0.0.1) Host is up (0.000015s latency). rDNS record for 127.0.0.1: localhost.localdomain Not shown: 65534 closed ports PORT STATE SERVICE VERSION 22/tcp open ssh OpenSSH 4.3 (protocol 2.0) 80/tcp open http Apache httpd 2.2.3 ((CentOS)) Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 7.99 seconds AND sh-3.2# nmap -sV -p 0-65535 xxx.com Starting Nmap 5.51 ( http://nmap.org ) at 2011-02-16 00:01 EST Warning: Unable to open interface vmnet1 -- skipping it. Warning: Unable to open interface vmnet8 -- skipping it. Stats: 0:07:49 elapsed; 0 hosts completed (1 up), 1 undergoing SYN Stealth Scan SYN Stealth Scan Timing: About 36.92% done; ETC: 00:22 (0:13:21 remaining) Stats: 0:22:05 elapsed; 0 hosts completed (1 up), 1 undergoing Service Scan Service scan Timing: About 75.00% done; ETC: 00:23 (0:00:02 remaining) Nmap scan report for xxx.com (x.x.x.x) Host is up (0.22s latency). Not shown: 65528 closed ports PORT STATE SERVICE VERSION 21/tcp open tcpwrapped 22/tcp open ssh OpenSSH 4.3 (protocol 2.0) 25/tcp open tcpwrapped 80/tcp open http Apache httpd 2.2.3 ((CentOS)) 110/tcp open tcpwrapped 143/tcp open tcpwrapped 443/tcp open tcpwrapped 8080/tcp open http-proxy?

    Read the article

  • Distribute IP packets accross different NIC queues with MSI (Message Signalled Interrupts)

    - by Ansis Atteka
    NetXtreme II BCM5709 Gigabit Ethernet NIC supports MSI feature (Message Signaled Interrupts) and it has 8 queues. Each queue has its own Interrupt handler in /proc/interrupts. What I am trying to accomplish is to tell NIC which packets should go to which queue. Questions: Is it possible to manually specify which IP packets should go to which queue by encapsulated protocol type (e.g. IPsec packets go in one queue, while TCP packets go in another queue)? If it is possible - how can I do it under Linux? If it is not possible - should I look at MSI-X capable NIC cards to solve this problem? More details: We have one Interface that is terminating IPSec and forwarding/terminating TCP connections. The IPSec packet decryption is inlined (this means that decryption is done under the same ksoftirqd/X context). We are trying to find out if we will be able to improve total performance if IPSec packets will be scheduled on another CPU than TCP packets. One more limitation is that IPSec code is not MP-safe, hence I can not run it under more than one ksoftirqd/X. By default it seems that packets are distributed/hashed by source IP over the 8 NIC queues. The bottleneck is IPSec that chokes out TCP traffic while it is decrypting/encrypting IPSec packets at ~100% CPU. OS is Ubuntu 10.10 (2.6.32-27-server) and NIC is Broadcom BCM5709.

    Read the article

  • Process killing trouble

    - by Aditya Singh
    I am trying to program a server software which involves a lot of testing on java / scala platform. Whenever i compile and execute the code. It starts listening on port 80. Sometimes i need to terminate it by Ctrl+C when it hangs. In that case, ubuntu is not freeing the port. So in order to run the process, i have to restart the machine. I see this at ps aux root 1924 0.0 0.0 5796 1660 pts/0 T 05:44 0:00 sudo scala - root 1925 0.2 1.5 491448 40796 pts/0 Tl 05:44 0:03 java -Xmx256M -Xms16M So process 1924 and 1925. I did sudo kill on both these. But then they keep on persisting even after a long time. sudo nmap -T Aggressive -A -v 127.0.0.1 -p 1-65000 Scanning localhost (127.0.0.1) [65000 ports] Discovered open port 80/tcp on 127.0.0.1 It means its still there ! sudo netstat --tcp --udp --listening --program tcp6 0 0 [::]:www [::]:* LISTEN 1925/java tcp6 0 0 ip6-localhost:ipp [::]:* LISTEN 1185/cupsd This means its 1925 - java How to kill it.

    Read the article

  • Identifying mail account used in CRAM-MD5 transaction

    - by ManiacZX
    I suppose this is one of those where the tool for identifying the problem is also the tool used for taking advantage of it. I have a mail server that I am seeing emails that spam is being sent through it. It is not an open relay, the messages in question are being sent by someone authenticating to the smtp with CRAM-MD5. However, the logs only capture the actual data passed, which has been hashed so I cannot see what user account is being used. My suspicion is a simple username/password combo or a user account's password has otherwise been compromised, but I cannot do much about it without knowing what user it is. Of course I can block the IP that is doing it, but that doesn't fix the real problem. I have both the CRAM-MD5 Base64 challenge string and the hashed client auth string containing the username, password and challenge string. I am looking for a way to either reverse this (which I haven't been able to find any information on) or otherwise I suppose I need a dictionary attack tool designed for CRAM-MD5 to run through two lists, one for username and one for password and the constant of the challenge string until it finds a matching result of the authentication string I have logged. Any information on reversing using the data I have logged, a tool to identify it or any alternative methods you have used for this situation would be greatly appreciated.

    Read the article

  • LTO 2 tape performance in LTO 3 drive

    - by hmallett
    I have a pile of LTO 2 tapes, and both an LTO 2 drive (HP Ultrium 460e), and an autoloader with an LTO 3 drive in (Tandberg T24 autoloader, with a HP drive). Performance of the LTO 2 tapes in the LTO 2 drive is adequate and consistent. HP L&TT tells me that the tapes can be read and written at 64 MB/s, which seems in line with the performance specifications of the drive. When I perform a backup (over the network) using Symantec Backup Exec, I get about 1700 MB/min backup and verify speeds, which is slower, but still adequate. Performance of the LTO 2 tapes in the LTO 3 drive in the autoloader is a different story. HP L&TT tells me that the tapes can be read at 82 MB/s and written at 49 MB/s, which seems unusual at the write speed drop, but not the end of the world. When I perform a backup (over the network) using Symantec Backup Exec though, I get about 331 MB/min backup speed and 205 MB/min verify speeds, which is not only much slower, but also much slower for reads than for writes. Notes: The comparison testing was done on the same server, SCSI card and SCSI cable, with the same backup data set and the same tape each time. The tape and drives are error-free (according to HP L&TT and Backup Exec). The SCSI card is a U160 card, which is not normally recommended for LTO 3, but we're not writing to LTO 3 tapes at LTO 3 speeds, and a U320 SCSI card is not available to me at the moment. As I'm scratching my head to determine the reason for the performance drop, my first question is: While LTO drives can write to the previous generation LTO tapes, does doing so normally incur a performance penalty?

    Read the article

  • Dual Monitor support rdp 7 to win 7 on esxi

    - by rphilli5
    I am trying to RDP from a Windows 7 Professional dual monitor physical machine to a Windows 7 Professional VM hosted on esxi 4.0. I can get the spanning option to work to both monitors, but I have tried 3 different methods of connecting but have not been able to use true multiple monitors. At different times, I tried checking the "use all monitors" option, command line mstsc /multimon and added the line use multimon:i:1 to the .rdp file. None of these worked. Any ideas? The physical machine can connect to other Windows 7 physical machines with true multi monitor access. I also have the same issue when going from a 32bit RC1 machine to a Windows 7 Professional x64, but not when going in the reverse direction. Here's the .rdp: screen mode id:i:2 use multimon:i:1 desktopwidth:i:1440 desktopheight:i:900 session bpp:i:16 winposstr:s:0,1,341,118,1139,568 compression:i:1 keyboardhook:i:2 audiocapturemode:i:0 videoplaybackmode:i:1 connection type:i:1 displayconnectionbar:i:1 disable wallpaper:i:1 allow font smoothing:i:0 allow desktop composition:i:0 disable full window drag:i:1 disable menu anims:i:1 disable themes:i:1 disable cursor setting:i:0 bitmapcachepersistenable:i:1 full address:s:192.168.1.5 audiomode:i:0 redirectprinters:i:1 redirectcomports:i:0 redirectsmartcards:i:1 redirectclipboard:i:1 redirectposdevices:i:0 redirectdirectx:i:1 autoreconnection enabled:i:1 authentication level:i:2 prompt for credentials:i:0 negotiate security layer:i:1 remoteapplicationmode:i:0 alternate shell:s: shell working directory:s: gatewayhostname:s: gatewayusagemethod:i:4 gatewaycredentialssource:i:4 gatewayprofileusagemethod:i:0 promptcredentialonce:i:1 use redirection server name:i:0 drivestoredirect:s:

    Read the article

  • access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

    - by Joel Alenchery
    Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely Accessing IP restricted server from dynamic IP which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was Static IP for dynamic IP the first answer seems exactly what I need but I dont know how I would go about doing the same on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

    Read the article

  • Are there any Microsoft Exchange Clients for iOS and Android that store their local data in an encrypted manner?

    - by Zac B
    I don't feel like this is a product recommendation question, more of a "does this tech even exist and is it feasible" question, but if I'm wrong, feel free to give this question the boot. Context: Our company has a bunch of traveling employees who access the company's Exchange server via thier iDevices or android phones, but because of the data protection laws in the state where our company is based (and the nature of the data our company works with), a recent security audit found that all mobile devices (laptops, phones, etc) operated by our company need to have all company correspondence and related data encrypted all the time. For laptops, that was easy: BitLocker or TrueCrypt, problem solved. For phones and tablets, however, I'm stumped. Sure, you can put lock screens/passwords on the phones, but the data is still accessible via external extraction, as law enforcement authorities already know. Question: Are there any clients for Microsoft Exchange that run on iOS or Android which store local data encrypted? The people using our mobile devices do a lot of their work while offline, so just giving them OWA access with SSL connection security isn't enough. Are there apps/technologies that present an additional login credential prompt to decrypt locally stored data in the app's storage area on the phone? My gut reaction when I started looking into this was "that doesn't sound like something Apple would allow into the App Store", but I've been wrong before...

    Read the article

  • SSH to VM rejecting password, works from virt-manager console

    - by boundless08
    First of all, I'm sorry if there is a duplicate post somewhere. I searched for a while but none of the posts I found fixed my problem. It's fairly annoying. I created a new VM on our network and when using virt-manager I can log into the VM fine with the username and password. When I try to ssh to the VM from anywhere else it rejects the password, but I know the password is correct. I've even changed it multiple times to make sure its correct. The address I'm ssh'ing to is definitely pointing at the right VM as well, I've tested all this. It's still usable, but the virt-manager console is very limited so the sooner I can get to the bottom of this the better. VM is running ubuntu 12.04 btw. EDIT 1 Checked the auth.log and all I'm getting is "sshd[29304]:Connection closed by 'server.ip.address' [preauth]". I also tried allowing logging in as root, and even turned off password auth altogether in sshd_config and still nothing! I then turned on "AllowEmptyPasswords", still a whole lot of nothing.

    Read the article

  • mod_security2 and w00tw00t attacks

    - by Saif Bechan
    I have a server with apache and i recently installed mod_config2 because I get attacked a lot by this: My apache version is apache v 2.2.3 and i user mod_security2.c [Wed Mar 24 02:35:41 2010] [error] [client 88.191.109.38] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Mar 24 02:47:31 2010] [error] [client 202.75.211.90] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Mar 24 02:47:49 2010] [error] [client 95.228.153.177] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Mar 24 02:48:03 2010] [error] [client 88.191.109.38] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) I tried configuring mod_security2 like this: SecFilterSelective REQUEST_URI "w00tw00t.at.ISC.SANS.DFind" SecFilterSelective REQUEST_URI "\w00tw00t.at.ISC.SANS" SecFilterSelective REQUEST_URI "w00tw00t.at.ISC.SANS" SecFilterSelective REQUEST_URI "w00tw00t.at.ISC.SANS.DFind:" SecFilterSelective REQUEST_URI "w00tw00t.at.ISC.SANS.DFind:)" The thing in mod_security2 is that SecFilterSelective can not be used, it gives me erros. Instead i use a rule like this: SecRule REQUEST_URI "w00tw00t.at.ISC.SANS.DFind" SecRule REQUEST_URI "\w00tw00t.at.ISC.SANS" SecRule REQUEST_URI "w00tw00t.at.ISC.SANS" SecRule REQUEST_URI "w00tw00t.at.ISC.SANS.DFind:" SecRule REQUEST_URI "w00tw00t.at.ISC.SANS.DFind:)" Even this does not work. I don't know what to do anymore. Anyone have any advice?

    Read the article

  • A complicated nginx/php-fpm chroot setup

    - by Rsaesha
    I'm running nginx and php-fpm, and I want to set up jails for each host. My setup is a little complicated, so following tutorials on the web gets me nowhere. Each site has a directory /var/www/domain.name/ Inside that directory, there will be a public/ directory which will be the website root, a logs/ directory which will store nginx logs for that site specifically, and the chroot filesystem (etc/, usr/, etc.) The first problem I've run into is that nomatter how I configure it, PHP-FPM cannot find the files that are passed to it via nginx. They result in a "Primary script unknown" error, and to make matters worse, the error messages from PHP-FPM are no more verbose than that, so I can't figure out what path is being passed by nginx. A php-fpm pool configuration for a host looks like this: [host] user = host group = www-data chroot = /var/www/domain.name chdir = /public listen = 127.0.0.1:900x 'x' is incremented for each pool. The nginx config for this host looks like this: server { listen 80; server_name domain.name *.domain.name; root /var/www/domain.name/public; index index.php index.html index.html; location ~ \.php$ { expires epoch; fastcgi_split_path_info ^(.+\.php)(/.+)$; include fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_pass 127.0.0.1:9001; } } I'm guessing that the problem is the SCRIPT_FILENAME parameter, but I've changed it to just $fastcgi_script_name, and various other combinations, but to no avail. Can anyone help?

    Read the article

  • Mod_Perl configuration for multiple domains

    - by daliaessam
    Reading the Mod_Perl module documentation, can we configure it on per domain basis, what I mean can we configure it to run on every domain or specific domain only. What I see in the docs is: Registry Scripts To enable registry scripts add to httpd.conf: Alias /perl/ /home/httpd/2.0/perl/ <Location /perl/> SetHandler perl-script PerlResponseHandler ModPerl::Registry PerlOptions +ParseHeaders Options +ExecCGI </Location> and now assuming that we have the following script: #!/usr/bin/perl print "Content-type: text/plain\n\n"; print "mod_perl 2.0 rocks!\n"; saved in /home/httpd/httpd-2.0/perl/rock.pl. Make the script executable and readable by everybody: % chmod a+rx /home/httpd/httpd-2.0/perl/rock.pl Of course the path to the script should be readable by the server too. In the real world you probably want to have a tighter permissions, but for the purpose of testing, that things are working, this is just fine. From what I understand above, we can run Perl scripts only from one specific folder that we put the directive above. So the question again, can we make this directive per domain for all domains or for specific number of domains?

    Read the article

  • IIS 7.5 / Windows 7: Error 500.19, error code 0x800700b7

    - by nikhiljoshi
    I have been trying to resolve this issue. I am using Windows 7 and VS2008 +iis7.5. My project is stuck because of this error. The error says: Error Summary HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. `Detailed Error Information Module IIS Web Core Notification BeginRequest Handler Not yet determined Error Code 0x800700b7 Config Error There is a duplicate 'system.web.extensions/scripting/scriptResourceHandler' section defined Config File \\?\C:\inetpub\wwwroot\test23\web.config Requested URL http://localhost:80/test23 Physical Path C:\inetpub\wwwroot\test23 Logon Method Not yet determined Logon User Not yet determined Config Source 15: <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> 16: <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> 17: <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> ` I followed the instructions in this Microsoft solution document, but it didn't help. http://support.microsoft.com/kb/942055

    Read the article

  • Apache/Passenger and cpulimit

    - by Dave Smylie
    I run a ruby on rails site that processes email - the email is dumped directly into the web app via a POST from postfix. At times I can get a burst of email coming in causing a prolonged surge in CPU usage making my VPS provider understandable unhappy with me. These emails don't need to be processed in a timely manner - they just need to be (eventually) processed. Obviously I can't just nice the process as that only looks at the cpu usage on my VPS and can't take into account the cpu usage on the other VPS's. I have found a utility called cpulimit that will you put hard limits on cpu usage for a particular process. (eg 20%). This seems ideal for this purpose, but I can't work out to integrate with apache/passenger. Passenger starts up a ruby process for each server and restarts them periodically. Each time the pid will change. Cpulimit needs to be given a pid number for it to act on. Anyone got any ideas how I could get passenger to fire off a call this command when it's starting up this particular virtual host?

    Read the article

  • Configuring suExec to work with Apache and PHP via FastCGI

    - by RandomPsychology
    I have installed ISPConfig 3 on an Ubuntu VPS and configured it for Apache + PHP via FastCGI and suexec. I am able to upload PHP apps (e.g. Wordpress) and run them normally w/ suexec. However, for some reason the PHP scripts cannot write data to disk. For instance, trying to upgrade a plugin via Wordpress' web interface causes it to fail with the error "Could not create directory /path/to/wp-content/upgrade/plugin.tmp." Trying to upload media and other assets also fails via the web. I've checked owner/group on the directory structure and it looks good. The suExec log also seems to be normal and I don't see any indicative errors in the web server logs. I can also confirm that changing the owner/group on the directories does result in the expected error in suexec.log. Additionally, I have the directory permissions set to u=rw,g=r,o= and I've also tried setting g=rw. None of this results in my scripts being able to write to the directories. What am I doing wrong?

    Read the article

  • can't access SATA card config screen on boot, nor access the disks

    - by Ronald
    We've just upgraded our file server using an ASUS P6T WS Pro board, running FreeBSD-RELEASE 8.2 and using zfs to manage 12 WD20EARS disks. Since our 3ware card has been giving us trouble we started using the six on-board SATA connectors and got a SuperMicro USAS2-L8i to provide eight more ports. Mechanically, the card is an awkward fit but electrically it all seems ok. Upon boot, the LSI controller shows up and states that pressing ctrl-c will bring up the LSI Config Utility. When doing that, the message changes to state that the utility will be started after initialization, however that never happens. There does seem to be an error message that's only displayed too briefly to read and seems to be about PCI and "not enough space". (That message is pushed off by a hardware summary and I've found no way to scroll back at this point.) The disks do not show up in any recognizable ways after booting, either. I found a hint in another discussion to check the address mapping on either the card or the motherboard BIOS, but have found no way to do that. So what I tried on a hunch is to disable everything that's on-board, including network adapters, Firewire controller and SATA. In fact, after doing that, I can successfully launch the LSI Config Utility. As far as I can tell, all looks well in there, and when booting in that configuration it also displays a list of the disks connected to it, which looks just fine as well. Only problem now is that I can't boot that way, because I need the on-board SATA controller and network adapters. As soon as I re-enable any of them I'm back to square one. That discussion I mentioned about mapping addresses said to try D000, then D7FF, then DFFF, in order. The LSI Config Utility shows the card address as D000 but offers no way of changing it. Any tips or insights would be appreciated.

    Read the article

  • MySQL permission errors

    - by dotancohen
    It seems that on a Ubuntu 14.04 machine the user mysql cannot access anything. It is not writing logs nor reading files. Witness: - bruno():mysql$ cat /etc/passwd | grep mysql mysql:x:116:127:MySQL Server,,,:/nonexistent:/bin/false - bruno():mysql$ sudo mysql_install_db Installing MySQL system tables... 140818 18:16:50 [ERROR] Can't read from messagefile '/usr/share/mysql/english/errmsg.sys' 140818 18:16:50 [ERROR] Aborting 140818 18:16:50 [Note] Installation of system tables failed! Examine the logs in /var/lib/mysql for more information. ...boilerplate trimmed... - bruno():mysql$ ls -la /usr/share/mysql/english/errmsg.sys -rw-r--r-- 1 root root 59535 Jul 29 13:40 /usr/share/mysql/english/errmsg.sys - bruno():mysql$ wc -l /usr/share/mysql/english/errmsg.sys 16 /usr/share/mysql/english/errmsg.sys Here we have seen that mysql cannot read /usr/share/mysql/english/errmsg.sys even though the permissions are open to read it, and in fact the regular login user can read the file (with wc). Additionally, MySQL is not writing any logs: - bruno():mysql$ ls -la /var/log/mysql total 8 drwxr-s--- 2 mysql adm 4096 Aug 18 16:10 . drwxrwxr-x 18 root syslog 4096 Aug 18 16:10 .. What might cause this user to not be able to access anything? What can I do about it?

    Read the article

< Previous Page | 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009  | Next Page >