Search Results

Search found 6882 results on 276 pages for 'ftp proxy'.

Page 201/276 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

• How to Deploy Visual Web Developer Express to GoDaddy

  - by Randy

  I have finished the programming on my first web site using Microsoft Visual Web Developer 2010 Express. I have copied all of the files to the GoDaddy server, but the site still displays "Coming Soon". I spoke with their tech support who tell me that there is no "index" file. I used the "Copy Web Site" function in VWD to move all the files over via FTP, so I know of no other files that should be copied. Nor do I understand what they are referring to as in "index" file. Has anybody else had this problem? Can anybody help me to figure out why this isn't working? Thanks! Randy

  Read the article

• HTTP response time profiling

  - by Sparsh Gupta

  Hello I have a nginx reverse proxy. The server is close to serving 600-700 requests per second. I have a Munin HTTP load time plugin which is outputting this: http://monitor.wingify.com/munin/visualwebsiteoptimizer.com/lb1.visualwebsiteoptimizer.com-http_loadtime.html Now, the problem is I am seeing some spikes in the graph. Expected response times should always be under 200ms. I am keeping an eye on syslog and messages but I am unable to figure out the actual cause of this. I was wondering if there is any good HTTP response time profiling system which I can install / embed with this nginx server and get a detailed reports / logs on the breakup of time taken by different things and what exactly is the cause of the spikes. The profiling system would also help me understand bottlenecks and how can I further optimize the latency. Most important right now is to investigate the cause of the spikes in the HTTP load time graphs (similar pattern is reported by external monitors - Pingdom) and to fix it to get consistent response times Thanks

  Read the article

• Nginx compiled --with-http_spdy_module yet raise errors complains ngx_http_spdy_module

  - by c19

  [emerg] 21101#0: the "spdy" parameter requires ngx_http_spdy_module in /etc/nginx/conf.d/cc.conf isn't it the same module? and it causes multi-redirection error too. I have no idea what is going on. Full configure arg: nginx version: nginx/1.4.2 built by gcc 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) TLS SNI support enabled configure arguments: --prefix=/etc/nginx --sbin-path=/usr/sbin/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log --http-log-path=/var/log/nginx/access.log --pid-path=/var/run/nginx.pid --lock-path=/var/run/nginx.lock --http-client-body-temp-path=/var/cache/nginx/client_temp --http-proxy-temp-path=/var/cache/nginx/proxy_temp --http-fastcgi-temp-path=/var/cache/nginx/fastcgi_temp --http-uwsgi-temp-path=/var/cache/nginx/uwsgi_temp --http-scgi-temp-path=/var/cache/nginx/scgi_temp --user=nginx --group=nginx --with-http_ssl_module --with-http_realip_module --with-http_addition_module --with-http_sub_module --with-http_dav_module --with-http_flv_module --with-http_mp4_module --with-http_gunzip_module --with-http_gzip_static_module --with-http_random_index_module --with-http_secure_link_module --with-http_stub_status_module --with-mail --with-mail_ssl_module --with-file-aio --with-ipv6 --with-cc-opt='-O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' --with-pcre --with-http_ssl_module `--with-http_spdy_module` --with-http_gunzip_module --with-http_gzip_static_module --with-http_stub_status_module --with-openssl=/usr/local/src/openssl-1.0.1e

  Read the article

• Apache failover for JBoss

  - by DaveB

  I am running a JBoss web app (AS 6 Final) hosted on linux (Debian). I would like to implement a failover solution so that when JBoss is down, a static web page is served in its place. My current solution is to run Apache as a reverse proxy (described here), which allows me to serve .php files from apache and forward all other requests to JBoss. But I am not sure how make Apache step in when JBoss is down? Note. both apache and jboss will be running on the same box, this is (Application failover rather then server failover) to cover times when JBoss is re-deploying etc. So I am looking for the simplest solution really Many thanks

  Read the article

• Windows 7: how to let AutoConfigURL change be effective immediately?

  - by Jeroen Pluimers

  I want to set both the script and the "Use automatic configuration script" checkbox in Windows 7 using a script that immediately affects anything using wininet.dll (Internet Explorer, Chrome, .NET apps, etc). I've done a before/after registry diff, and tried doing this through the registry, but things like the reg files below require the apps to be restarted. Chaning the settings by pressing the "LAN Settings" button through this Control panel shortcut has immediate affect: %windir%\system32\control.exe Inetcpl.cpl,,4 How can I script this immediate effect? These are the registry script files: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings] “AutoConfigURL”=”http://www.company.com/proxy.pac” (registry scripts borrowed from http://danny.quantumspark.net/wordpress/) [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings] “AutoConfigURL”=- --jeroen (who is checking out the notify function at superuser.com)

  Read the article

• Squid, NTLM, Windows 7 and IE8

  - by Harley

  I'm running Squid 2.7-stable4, Samba 3 and the Windows 7 RC with IE8. I have NTLM authentication setup on my squid proxy server and it works fine for every combination of browser and Windows (including IE8 on XP and Firefox on Win7), but it doesn't work (keeps asking for authentication) for IE8 on Windows 7. I can get it to work using the LmCompatibilityLevel registry hack, but I'd really prefer to get it working on the server. Does anyone have any experience with this? Or know where to start looking? The samba logs don't reveal much. EDIT: Here's what the wb-MYDOMAIN log says when I attempt to authenticate: [2009/08/20 15:13:36, 4] nsswitch/winbindd_dual.c:fork_domain_child(1080) child daemon request 13 [2009/08/20 15:13:36, 10] nsswitch/winbindd_dual.c:child_process_request(478) process_request: request fn AUTH_CRAP [2009/08/20 15:13:36, 3] nsswitch/winbindd_pam.c:winbindd_dual_pam_auth_crap(1755) [ 4127]: pam auth crap domain: MYDOMAIN user: MYUSER [2009/08/20 15:13:36, 0] nsswitch/winbindd_pam.c:winbindd_dual_pam_auth_crap(1767) winbindd_pam_auth_crap: invalid password length 24/282 [2009/08/20 15:13:36, 2] nsswitch/winbindd_pam.c:winbindd_dual_pam_auth_crap(1931) NTLM CRAP authentication for user [MYDOMAIN]\[MYUSER] returned NT_STATUS_INVALID_PARAMETER (PAM: 4) [2009/08/20 15:13:36, 10] nsswitch/winbindd_cache.c:cache_store_response(2267) Storing response for pid 4547, len 3240

  Read the article

• using Silverlight 3's HtmlPage.Window.Navigate method to reuse an already open browser window

  - by Phil

  Hi, I want to use an external browser window to implement a preview functionality in a silverlight application. There is a list of items and whenever the user clicks one of these items, it's opened in a separate browser window (the content is a pdf document, which is why it is handled ouside of the SL app). Now, to achieve this, I simply use HtmlPage.Window.Navigate(new Uri("http://www.bing.com")); which works fine. Now my client doesn't like the fact that every click opens up a new browser window. He would like to see the browser window reused every time an item is clicked. So I went out and tried implementing this: Option 1 - Use the overload of the Navigate method, like so: HtmlPage.Window.Navigate(new Uri("http://www.bing.com"), "foo"); I was assuming that the window would be reused when the same target parameter value (foo) would be used in subsequent calls. This does not work. I get a new window every time. Option 2 - Use the PopupWindow method on the HtmlPage HtmlPage.PopupWindow(new Uri("http://www.bing.com"), "blah", new HtmlPopupWindowOptions()); This does not work. I get a new window every time. Option 3 - Get a handle to the opened window and reuse that in subsequent calls private HtmlWindow window; private void navigationButton_Click(object sender, RoutedEventArgs e) { if (window == null) window = HtmlPage.Window.Navigate(new Uri("http://www.bing.com"), "blah"); else window.Navigate(new Uri("http://www.bing.com"), "blah"); if (window == null) MessageBox.Show("it's null"); } This does not work. I tried the same for the PopupWindow() method and the window is null every time, so a new window is opened on every click. I have checked both the EnableHtmlAccess and the IsPopupWindowAllowed properties, and they return true, as they should. Option 4 - Use Eval method to execute some custom javascript private const string javascript = @"var popup = window.open('', 'blah') ; if(popup.location != 'http://www.bing.com' ){ popup.location = 'http://www.bing.com'; } popup.focus();"; private void navigationButton_Click(object sender, RoutedEventArgs e) { HtmlPage.Window.Eval(javascript); } This does not work. I get a new window every time. option 5 - Use CreateInstance to run some custom javascript on the page private void navigationButton_Click(object sender, RoutedEventArgs e) { HtmlPage.Window.CreateInstance("thisIsPlainHell"); } and in my aspx I have function thisIsPlainHell() { var popup = window.open('http://www.bing.com', 'blah'); popup.focus(); } Guess what? This does work. The only thing is that the window behaves a little strange and I'm not sure why: I'm behind a proxy and in all other scenarios I'm being prompted for my password. In this case however I am not (and am thus not able to reach the external site - bing in this case). This is not really a huge issue atm, but I just don't understand what's goign on here. Whenever I type another url in the address bar of the popup window (eg www.google.com) and press enter, it opens up another window and prompts me for my proxy password. As a temporary solution option 5 could do, but I don't like the fact that Silverlight is not able to manage this. One of the main reasons my client has opted for Silverlight is to be protected against all the browser specific hacking that comes with javascript. Am I doing something wrong? I'm definitely no javascript expert, so I'm hoping it's something obvious I'm missing here. Cheers, Phil

  Read the article

• Server with IIS and Apache - how to SSL encrypt Apache with IIS

  - by GAThrawn

  I have a Windows Server 2003 box already setup and working with IIS 6. IIS is set to serve a site out over both HTTP and HTTPS connections using default ports. For various reasons I need to set Apache up on the same server and it needs to serve its pages to end-users as SSL encrypted HTTPS pages. Neither IIS or Apache are (or are ever likely to be) particularly high traffic or high usage. The way I see it there are two possible ways this could be done. Either export the SSL cert from IIS,set it up in Apache and get Apache to server the HTTPS connections itself over a non-default port. Or use IIS to proxy Apache in some way over it's existing SSL security. What is going to end up easiest to setup, configure, maintain and run? Which is going to work best? Has anyone done this sort of thing before? Any tips or things to look out for?

  Read the article

• WCF MustUnderstand headers are not understood

  - by raghur

  Hello everyone, I am using a Java Web Service which is developed by one of our vendor which I really do not have any control over it. I have written a WCF router which the client application calls it and the router sends the message to the Java Web Service and returns the data back to the client. The issue what I am encountering is, I am successfully able to call the Java web service from the WCF router, but, I am getting the following exceptions back. Router config file is as follows: <customBinding> <binding name="SimpleWSPortBinding"> <!--<reliableSession maxPendingChannels="4" maxRetryCount="8" ordered="true" />--> <!--<mtomMessageEncoding messageVersion ="Soap12WSAddressing10" ></mtomMessageEncoding>--> <textMessageEncoding maxReadPoolSize="64" maxWritePoolSize="16" messageVersion="Soap12WSAddressing10" writeEncoding="utf-8" /> <httpTransport manualAddressing="false" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" allowCookies="false" authenticationScheme="Anonymous" bypassProxyOnLocal="true" keepAliveEnabled="true" maxBufferSize="65536" transferMode="Buffered" unsafeConnectionNtlmAuthentication="false"/> </binding> </customBinding> Test client config file <customBinding> <binding name="DocumentRepository_Binding_Soap12"> <!--<reliableSession maxPendingChannels="4" maxRetryCount="8" ordered="true" />--> <!--<mtomMessageEncoding messageVersion ="Soap12WSAddressing10" ></mtomMessageEncoding>--> <textMessageEncoding maxReadPoolSize="64" maxWritePoolSize="16" messageVersion="Soap12WSAddressing10" writeEncoding="utf-8"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> </textMessageEncoding> <httpTransport manualAddressing="false" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" allowCookies="false" authenticationScheme="Anonymous" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" keepAliveEnabled="true" maxBufferSize="65536" proxyAuthenticationScheme="Anonymous" realm="" transferMode="Buffered" unsafeConnectionNtlmAuthentication="false" useDefaultWebProxy="true" /> </binding> </customBinding> If I use the textMessageEncoding I am getting <soap:Text xml:lang="en">MustUnderstand headers: [{http://www.w3.org/2005/08/addressing}To, {http://www.w3.org/2005/08/addressing}Action] are not understood.</soap:Text> If I use mtomMessageEncoding I am getting The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature session shutdown or an internal server error. My Router class is as follows: [ServiceBehavior(InstanceContextMode = InstanceContextMode.Single, ConcurrencyMode = ConcurrencyMode.Multiple, AddressFilterMode = AddressFilterMode.Any, ValidateMustUnderstand = false)] public class EmployeeService : IEmployeeService { public System.ServiceModel.Channels.Message ProcessMessage(System.ServiceModel.Channels.Message requestMessage) { ChannelFactory<IEmployeeService> factory = new ChannelFactory<IEmployeeService>("client"); factory.Endpoint.Behaviors.Add(new MustUnderstandBehavior(false)); IEmployeeService proxy = factory.CreateChannel(); Message responseMessage = proxy.ProcessMessage(requestMessage); return responseMessage; } } The "client" in the above code under ChannelFactory is defined in the config file as: <client> <endpoint address="http://JavaWS/EmployeeService" binding="wsHttpBinding" bindingConfiguration="wsHttp" contract="EmployeeService.IEmployeeService" name="client" behaviorConfiguration="clientBehavior"> <headers> </headers> </endpoint> </client> Really appreciate your kind help. Thanks in advance, Raghu

  Read the article

• C# iterator for async file copy

  - by uno

  Been running in circles to find the best solution for my client. We have a server that images are uploaded via ftp. I want to write an application that scans this server at frequent intervals and if it finds files it copies them to another,processing server. So if during a time cycle, my app finds that there are 100 files, i want to start copying as many files as i can across to the processing server i figured delegates would be the way to go but now i come across iterators...what do the experts say?

  Read the article

• Cisco 800 series won't forward port

  - by sam

  Hello ServerFault, I am trying to forward port 444 from my cisco router to my Web Server (192.168.0.2). As far as I can tell, my port forwarding is configured correctly, yet no traffic will pass through on port 444. Here is my config: ! version 12.3 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug uptime service timestamps log uptime service password-encryption no service dhcp ! hostname QUESTMOUNT ! logging buffered 16386 informational logging rate-limit 100 except warnings no logging console no logging monitor enable secret 5 -removed- ! username administrator secret 5 -removed- username manager secret 5 -removed- clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 3:00 aaa new-model ! ! aaa authentication login default local aaa authentication login userlist local aaa authentication ppp default local aaa authorization network grouplist local aaa session-id common ip subnet-zero no ip source-route no ip domain lookup ip domain name quest.local ! ! no ip bootp server ip inspect name firewall tcp ip inspect name firewall udp ip inspect name firewall cuseeme ip inspect name firewall h323 ip inspect name firewall rcmd ip inspect name firewall realaudio ip inspect name firewall streamworks ip inspect name firewall vdolive ip inspect name firewall sqlnet ip inspect name firewall tftp ip inspect name firewall ftp ip inspect name firewall icmp ip inspect name firewall sip ip inspect name firewall fragment maximum 256 timeout 1 ip inspect name firewall netshow ip inspect name firewall rtsp ip inspect name firewall skinny ip inspect name firewall http ip audit notify log ip audit po max-events 100 ip audit name intrusion info list 3 action alarm ip audit name intrusion attack list 3 action alarm drop reset no ftp-server write-enable ! ! ! ! crypto isakmp policy 1 authentication pre-share ! crypto isakmp policy 2 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group staff key 0 qS;,sc:q<skro1^, domain quest.local pool vpnclients acl 106 ! ! crypto ipsec transform-set tr-null-sha esp-null esp-sha-hmac crypto ipsec transform-set tr-des-md5 esp-des esp-md5-hmac crypto ipsec transform-set tr-des-sha esp-des esp-sha-hmac crypto ipsec transform-set tr-3des-sha esp-3des esp-sha-hmac ! crypto dynamic-map vpnusers 1 description Client to Site VPN Users set transform-set tr-des-md5 ! ! crypto map cm-cryptomap client authentication list userlist crypto map cm-cryptomap isakmp authorization list grouplist crypto map cm-cryptomap client configuration address respond crypto map cm-cryptomap 65000 ipsec-isakmp dynamic vpnusers ! ! ! ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip access-group 102 in ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 bandwidth 640 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip nat outside ip inspect firewall out ip audit intrusion in encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username -removed- password 7 -removed- ppp ipcp dns request crypto map cm-cryptomap ! ip local pool vpnclients 192.168.99.1 192.168.99.254 ip nat inside source list 105 interface Dialer0 overload ip nat inside source static tcp 192.168.0.2 444 interface Dialer0 444 ip nat inside source static tcp 192.168.0.51 9000 interface Dialer0 9000 ip nat inside source static udp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 25 interface Dialer0 25 ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ip http server no ip http secure-server ! ip access-list logging interval 10 logging 192.168.0.2 access-list 1 remark The local LAN. access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.0.0 access-list 2 remark Where management can be done from. access-list 2 permit 192.168.0.0 0.0.0.255 access-list 3 remark Traffic not to check for intrustion detection. access-list 3 deny 192.168.99.0 0.0.0.255 access-list 3 permit any access-list 101 remark Traffic allowed to enter the router from the Internet access-list 101 permit ip 192.168.99.0 0.0.0.255 192.168.0.0 0.0.0.255 access-list 101 deny ip 0.0.0.0 0.255.255.255 any access-list 101 deny ip 10.0.0.0 0.255.255.255 any access-list 101 deny ip 127.0.0.0 0.255.255.255 any access-list 101 deny ip 169.254.0.0 0.0.255.255 any access-list 101 deny ip 172.16.0.0 0.15.255.255 any access-list 101 deny ip 192.0.2.0 0.0.0.255 any access-list 101 deny ip 192.168.0.0 0.0.255.255 any access-list 101 deny ip 198.18.0.0 0.1.255.255 any access-list 101 deny ip 224.0.0.0 0.15.255.255 any access-list 101 deny ip any host 255.255.255.255 access-list 101 permit tcp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit tcp host 120.136.2.22 any eq 1433 access-list 101 permit tcp host 123.100.90.58 any eq 1433 access-list 101 permit udp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit udp host 120.136.2.22 any eq 1433 access-list 101 permit udp host 123.100.90.58 any eq 1433 access-list 101 permit tcp any any eq 444 access-list 101 permit tcp any any eq 9000 access-list 101 permit tcp any any eq smtp access-list 101 permit udp any any eq non500-isakmp access-list 101 permit udp any any eq isakmp access-list 101 permit esp any any access-list 101 permit tcp any any eq 1723 access-list 101 permit gre any any access-list 101 permit tcp any any eq 22 access-list 101 permit tcp any any eq telnet access-list 102 remark Traffic allowed to enter the router from the Ethernet access-list 102 permit ip any host 192.168.0.254 access-list 102 deny ip any host 192.168.0.255 access-list 102 deny udp any any eq tftp log access-list 102 permit ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 102 deny ip any 0.0.0.0 0.255.255.255 log access-list 102 deny ip any 10.0.0.0 0.255.255.255 log access-list 102 deny ip any 127.0.0.0 0.255.255.255 log access-list 102 deny ip any 169.254.0.0 0.0.255.255 log access-list 102 deny ip any 172.16.0.0 0.15.255.255 log access-list 102 deny ip any 192.0.2.0 0.0.0.255 log access-list 102 deny ip any 192.168.0.0 0.0.255.255 log access-list 102 deny ip any 198.18.0.0 0.1.255.255 log access-list 102 deny udp any any eq 135 log access-list 102 deny tcp any any eq 135 log access-list 102 deny udp any any eq netbios-ns log access-list 102 deny udp any any eq netbios-dgm log access-list 102 deny tcp any any eq 445 log access-list 102 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit ip any host 255.255.255.255 access-list 102 deny ip any any log access-list 105 remark Traffic to NAT access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 106 remark User to Site VPN Clients access-list 106 permit ip 192.168.0.0 0.0.0.255 any dialer-list 1 protocol ip permit ! line con 0 no modem enable line aux 0 line vty 0 4 access-class 2 in transport input telnet ssh transport output none ! scheduler max-task-time 5000 ! end any ideas? :)

  Read the article

• NPS EAP authentication failing after Windows Update

  - by sqlreader

  I have a Windows 2008 Std server running NPS. After applying the latest round of updates (including Root Certificates for April 2012 KB931125 (See:http://support.microsoft.com/kb/933430/)), EAP authentication is failing due to being malformed. Sample error (Security/Event ID 6273), truncated for brevity: Authentication Details: Proxy Policy Name: Use Windows authentication for all users Network Policy Name: Wireless Access Authentication Provider: Windows Authentication Server: nps-host.corp.contoso.com Authentication Type: PEAP EAP Type: - Account Session Identifier: - Reason Code: 266 Reason: The message received was unexpected or badly formatted. The NPS policy (Wireless Access) is configured accordingly (for Constraints/Authentication methods) EAP Types: Microsoft: Protected EAP (PEAP) - with a valid certificate from ADCS Microsoft: Secured password (EAP-MSCHAP v2) Less secure authentication methods: Microsoft Encrypted Authentication version 2 (MS-CHAP-v2) User can change password after it has expired Microsoft Encrypted Authentication (MS-CHAP) User can change password after it has expired We've tested a different RADIUS server without the aforementioned patch, and removed EAP as an authentication type and experienced success. Has anyone else experienced this issue?

  Read the article

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• Building cURL & libcurl with Visual Studio 2010

  - by KTC

  With the help of question #197444, I have managed to build cURL & libcurl from source on Windows from within the Visual Studio 2010 IDE, OpenSSL 1.0.0, and zlib 1.2.5. The problem I see is that at the moment, if I run the resulting curl.exe with the argument -V, then the version that it report is curl 7.20.1 (i386-pc-win32) libcurl/7.20.1 OpenSSL/0.9.8d zlib/1.2.3 Protocols: dict file ftp ftps http https imap imaps ldap pop3 pop3s rtsp smtp smtps telnet tftp Features: AsynchDNS Largefile NTLM SSL libz Note the versions reported for both OpenSSL & zlib doesn't match if what I actually used. Any idea on how to fix this? p.s. Is there a clear list of optional components that can be compiled into libcurl and what options/preprocessor directive to use? (e.g. SSPI, libidn, ...?)

  Read the article

• Read half precision float (float16 IEEE 754r) binary data in matlab

  - by Michael

  you have been a great help last time, i hope you can give me some advise this time, too. I read a binary file into matlab with bit16 (format = bitn) and i get a string of ones and zeros. bin = '1 00011 1111111111' (16 bits: 1. sign, 2-6. exponent, 7-16. mantissa) According to ftp://www.fox-toolkit.org/pub/fasthalffloatconversion.pdf it can be 'converted' like out = (-1)^bin(1) * 2^(bin(2:6)-15) * 1.bin(7:16) [are exponent and mantissa still binary?] Can someone help me out and tell me how to deal with the 'eeeee' and '1.mmmmmmmmmm' as mentioned in the pdf, please. Thanks a lot! Michael

  Read the article

• BizTalk server problem

  - by WtFudgE

  Hi, we have a biztalk server (a virtual one (1!)...) at our company, and an sql server where the data is being kept. Now we have a lot of data traffic. I'm talking about hundred of thousands. So I'm actually not even sure if one server is pretty safe, but our company is not that easy to convince. Now recently we have a lot of problems. Allow me to situate in detail, so I'm not missing anything: Our server has 5 applications: One with 3 orchestrations, 12 send ports, 16 receive locations. One with 4 orchestrations, 32 send ports, 20 receive locations. One with 4 orchestrations, 24 send ports, 20 receive locations. One with 47 (yes 47) orchestrations, 37 send ports, 6 receive locations. One with common application with a couple of resources. Our problems have occured since we deployed the applications with the 47 orchestrations. A lot of these orchestrations use assign shapes which use c# code to do the mapping. This is because we use HL7 extensions and this is kind of special, so by using c# code & xpath it was a lot easier to do the mapping because a lot of these schema's look alike. The c# reads in XmlNodes received through xpath, and returns XmlNode which are then assigned again to biztalk messages. I'm not sure if this could be the cause, but I thought I'd mention it. The send and receive ports have a lot of different types: File, MQSeries, SQL, MLLP, FTP. Each of these types have a different host instances, to balance out the load. Our orchestrations use the BiztalkApplication host. On this server also a couple of scripts are running, mostly ftp upload scripts & also a zipper script, which zips files every half an hour in a daily zip and deletes the zip files after a month. We use this zipscript on our backup files (we backup a lot, backups are also on our server), we did this because the server had problems with sending files to a location where there were a lot (A LOT) of files, so after the files were reduced to zips it went better. Now the problems we are having recently are mainly two major problems: Our most important problem is the following. We kept a receive location with a lot of messages on a queue for testing. After we start this receive location which uses the 47 orchestrations, the running service instances start to sky rock. Ok, this is pretty normal. Let's say about 10000, and then we stop the receive location to see how biztalk handles these 10000 instances. Normally they would go down pretty fast, and it does sometimes, but after a while it starts to "throttle", meaning they just stop being processed and the service instances stay at the same number, for example in 30 seconds it goes down from 10000 to 4000 and then it stays at 4000 and it lowers very very very slowly, like 30 in 5minutes or something. So this means, that all the other service instances of the other applications are also stuck in here, and they are also not processed. We noticed that after restarting our host instances the instance number went down fast again. So we tried to selectively restart different host instances to locate the problem. We noticed that eventually restarting the file send/receive host instance would do the trick. So we thought file sends would be the problem. Concidering that we make a lot of backups. So we replaced the file type backups with mqseries backups. The same problem occured, and funny thing, restarting the file send/receive host still fixes the problem. No errors can be found in the event viewer either. A second problem we're having is. That sometimes at arround 6 am, all or a part of the host instances are being stopped. In the event viewer we noticed the following errors (these are more than one): The receive location "MdnBericht SQL" with URL "SQL://ZNACDBPEG/mdnd0001/" is shutting down. Details:"The error threshold has been exceeded. The receive location is shutting down.". The Messaging Engine failed to add a receive location "M2m Othello Export Start Bestand" with URL "\m2mservices\Othello_import$\DataFilter Start*.xml" to the adapter "FILE". Reason: "The FILE adapter cannot access the folder \m2mservices\Othello_import$\DataFilter Start. Verify this folder exists. Error: Logon failure: unknown user name or bad password. ". The FILE adapter cannot access the folder \m2mservices\Othello_import$\DataFilter Start. Verify this folder exists. Error: Logon failure: unknown user name or bad password. An attempt to connect to "BizTalkMsgBoxDb" SQL Server database on server "ZNACDBBTS" failed. Error: "Login failed for user ''. The user is not associated with a trusted SQL Server connection." It woould seem that there's a login failure at this time and that because of it other services are also experiencing problems, and eventually they are shut down. The thing is, our user is admin, and it's impossible that it's password is wrong "sometimes". We have concidering that the problem could be due to an infrastructure problem, but that's not really are department. I know it's a long post, but we're not sure anymore what to do. Would adding another server and balancing the load solve our problems? Is there a way to meassure our balance and know where to start splitting? What are normal numbers of load etc? I appreciate any answers because these issues are getting worse and we're also on a deadline. Thanks a lot for replies!

  Read the article

• Event 4098, 0x80070533 Logon failure: account currently disabled?

  - by Windos

  Having started to upgrade our PCs to Windows 7 we have noticed that we are getting group policy warnings in Event Viewer such as: "The user 'Word.qat' preference item in the 'a_Office2007_Users {A084A37B-6D4C-41C0-8AF7-B891B87FC53B}' Group Policy object did not apply because it failed with error code '0x80070533 Logon failure: account currently disabled.' This error was suppressed." 15 of these warnings appear every two hours on every Windows 7 PC, most of which are to do with core office applications and two are for plug-ins to out document management system. These warnings aren't afecting the users, but it would be nice to track down the source of them before we rollout Win7 to the rest of the Organisation. Any ideas as to where the login issue could be comming from (All users are connecting to the domain and proxy, etc fine)?

  Read the article

• how to install posix in php

  - by Nizzy

  posix does not appear when I run php -m cmd, however, I see it from the phpinfo() –enable-posix=shared on Linux with Plesk 9. Basically, I can't use posix_*() functions as described at http://www.php.net/manual/en/ref.posix.php this shows doesn't exists: if (function_exists(‘posix_getuid’)) { echo “posix_getuid available”; } else { echo “posix_getuid not available”; // this prints in my server. } could someone show me how to install it? thank you [PHP Modules] bz2 calendar ctype curl date dbase dom exif fileinfo filter ftp gd geoip gettext gmp hash iconv imap ionCube Loader json libxml mbstring mcrypt memcache mhash mysql mysqli openssl pcntl pcre PDO pdo_mysql pdo_sqlite readline Reflection session shmop SimpleXML sockets SPL sqlite standard tokenizer wddx xml xmlreader xmlwriter xsl zip zlib

  Read the article

• asterisk/freeswitch in nat/no-nat setup

  - by pQd

  hi, my current setup - i use bunch of sip hard-phones around few offices. all devices have two sip accounts configured - one on internal sip proxy [for calls between the branches], another - at 3rd party voip providers [ since it's in different countries - those are different providers, but that's irrelevant ]. i was thinking about terminating sip calls on something like asterisk/freeswitch server and having all sip-devices log on just once to such server[s] - mostly to provide things like voicemail, groupcalls, redirections etc. it seems perfectly doable but there is one problem - i cannot find examples how to prepare for nat/no nat. for calls routed to from/to 3rd party voip operator - i'll need handling for nat/stun etc, but for handling of internal calls - i do not want any nat, all traffic should go via vpns to different branches. can you provide me some hints how to configure it? any tutorials? thanks!

  Read the article

• ASP.NET MVC2 RC : How to intercept or trigger client-side validation before ajax request?

  - by jacko

  I have a username textbox on a form, that has a few validation rules applied to it via the DataAnnotation attributes: [Required(ErrorMessage = "FTP login is required")] [StringLength(15, ErrorMessage = "Must be 15 characters or fewer")] [RegularExpression(@"[a-zA-Z0-9]*", ErrorMessage = "Alpha-numeric characters only")] public string FtpLogin { get; set; } I also have a button next to this text box, that fires off a jQuery ajax request that checks for the existence of the username as follows: <button onclick="check(this);return false;" id="FtpLoginCheck" name="FtpLoginCheck">Available?</button> I'm looking for a way of tieing the two together, so that the client-side validation is performed before the call to the "check(this)" in the onclick event. Edit: To be more clear, I need a way to inspect or trigger the client-side validation result of the textbox, when I click the unrelated button beside it. Edit: I now have the button JS checking for $("form").validate().invalid, but not displaying the usual validation messages. Almost there Any ideas?

  Read the article

• Can't connect to MySQL server on '127.0.0.1' + Postfix

  - by Andrew Dakin

  I just installed Postfix and configured it to use MySQL. It wasn't sending any emails out after I did that so I checked /var/log/mail.log and it came back with this: postfix/trivial-rewrite[5283]: fatal: proxy:mysql:/etc/postfix/mysql-domains.cf(0,lock|fold_fix): table lookup problem postfix/cleanup[5258]: warning: AFCDC30437: virtual_alias_maps map lookup problem for [email protected] postfix/master[4761]: warning: process /usr/lib/postfix/trivial-rewrite pid 5282 exit status 1 postfix/proxymap[4126]: warning: connect to mysql server 127.0.0.1: Can't connect to MySQL server on '127.0.0.1' (110) In mysql-domains.cf I'm using: Hosts 127.0.0.1 I can connect to MySQL with this: mysql -u postfixuser -p But I can't connect this way: mysql -u postfixuser -h 127.0.0.1 -p maildbname Also when I run netstat -l it comes back with: tcp 0 0 localhost:mysql *:* LISTEN I've tried changing my hosts to: Hosts localhost But then I just get a socket error: postfix/cleanup[4870]: warning: connect to mysql server localhost: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' I also have this set up in the MySQL config file: bind-address = 127.0.0.1 I'm sure I'm missing something obvious, but I am pretty new to all this. Thanks! Andy

  Read the article

• GET /wpad.dat entries flooding my access_log

  - by Aas

  I have a small LAN of some 30 users in it with proxy auto configuration enabled and working. Two of them are requesting wpad.dat file too rapidly at a pace of 30 times per second. 10.1.14.246 - - [02/Jun/2014:09:07:18 +0200] "GET /wpad.dat HTTP/1.1" 302 302 10.1.14.141 - - [02/Jun/2014:09:07:18 +0200] "GET /wpad.dat HTTP/1.1" 302 302 I don't know whether this is a problem from performance perspective, (the server is powerful enough to handle this) but the problem is it clogs up the access_log file. It grows about 1GB per week. Clients run Win7Pro. What could cause this behavior? What can be done to stop it? I have shortened log rotate window as a temporary workaround to prevent /var fill up. Thanks beforehand for your support.

  Read the article

• Samba: session setup failed: NT_STATUS_LOGON_FAILURE

  - by stivlo

  I tried to set up Samba with "unix password sync", but I still get logon failure. I am running Ubuntu Natty Narwhal. $ smbclient -L localhost Enter stivlo's password: session setup failed: NT_STATUS_LOGON_FAILURE Here is my /etc/samba/smb.conf [global] workgroup = obliquid server string = %h server (Samba, Ubuntu) dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d security = user encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user [www] path = /var/www browsable = yes read only = no create mask = 0755 After modifying I restarted the servers: $ sudo restart smbd $ sudo restart nmbd However I still can't logon with my Unix username and password. Can anyone please help? Thank you in advance!

  Read the article

• .NET WebClient tag property, or keeping track of downloads ?

  - by GX

  Hello, I am trying to implement an Asynchronous file download from a web server using private void btnDownload_Click(object sender, EventArgs e) { WebClient webClient = new WebClient(); webClient.Credentials = new NetworkCredential("test", "test"); webClient.DownloadFileCompleted += new AsyncCompletedEventHandler(Completed); webClient.DownloadProgressChanged += new DownloadProgressChangedEventHandler(ProgressChanged); webClient.DownloadFileAsync(new Uri("ftp://2.1.1.1:17865/zaz.txt"), @"c:\myfile.txt"); } private void ProgressChanged(object sender, DownloadProgressChangedEventArgs e) { progressBar1.Value = e.ProgressPercentage; } private void Completed(object sender, AsyncCompletedEventArgs e) { MessageBox.Show("Download completed!"); } Now the download works fine, what I would like to know is the following: assuming that I will have more than 1 download at a time, what is the best way to keep track of each download and report progress separately ? I was looking for a tag property of the WebClient, but could not find one. Thank you

  Read the article

• SmartOS Virtualization with one public IP address

  - by matejkramny

  Is it possible? (title of this question) Googling Virtualization with one public IP address yields nothing useful What I have: SmartOS on a dedicated server. Dedicated server has one public IP address. What I want to do: Host multiple guest OS from that server Problem: Access to the guest through the (server that virtualizes the guest)'s IP address. Is this possible at all? Sorry, newbie to all this Research http://www.machine-unix.com/beginning-with-smartos/#comment-7256 Does not solve my problem - the guide sets up an internal IP http://blog.bgentil.fr/smartos-use-global-zone-as-gateway-for-guests.html Ideas Perhaps it is possible to do host-based translation like with nginx proxy?

  Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >