Search Results

Search found 11131 results on 446 pages for 'generic driver'.

Page 201/446 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

  • Cisco NAT vs Bridge vs BVI

    - by cjavapro
    The only devices on this particular LAN will all have public IP addresses. Also the public IP address will be configured directly on the machine,,, so we will not translate private/public IP addresses. If we use NAT,, we would have to translate the public IP on the WAN to the public IP on the LAN. The only security feature I expect on the gateway is an access list. I don't really know much about networking, so I am sorry if this question is generic.

    Read the article

  • IBM LTO 3 Tape drive periodically going "offline"

    - by bruno077
    I have a problem with a LTO 3 Tape Drive. I'm using Brightstor ArcServe Backup software with Windows Server 2003. Sometimes, the scheduled backups will stop working and going into "devices" inside this software reveals that the Tape Drive is offline. The only way to make it work again is uninstalling the Tape Drive's driver and rebooting the server: Windows then auto recognizes and installs the required drivers and the Tape Drive works again. Has anyone ever encountered a similar problem?

    Read the article

  • Not able to see Videos in Windows Vista.

    - by Amby
    I can run all different formats of videos in all different players but i dont get to see video in any, i can just hear the audio. Is it because of some codec or some missing driver? Also, i can see the videos online by running on any browser. Please help. Thanks.

    Read the article

  • Network Services disabled (not starting) on Windows XP

    - by Rickesh John
    I am currently running Windows XP Service Pack 3 on my system. But today, when I failed to connect to the internet, via a LAN cable, I realized that almost all of the vital network services had stopped functioning. Any attempts to start it through services.msc gives me the following message: Could not start the DNS Client Service on Local Computer Error 1068: The dependency service group failed to start All my software or services that are related to networking have stopped functioning, for example, Windows Firewall is turned off permanently, so is my Avast Anti-Virus' service of Real Time Shields and Web Shield. When I insert the LAN wire into my laptop, it registers itself, but this is what I get when I do a ping localhost C:>ping localhost Unable to contact IP driver, error code 2 Moveover, with ipconfig I get this : Windows IP Configuration An internal error occurred: The request is not supported. Please contact Microsoft Product Support Services for further help. Additional Information: Unable to query host name On some further poking around, I saw that none of the "NETWORK SERVICE" process in task manager, except svchost.exe were running. Also, when I first opened the task manager, I saw some 20 processes running with username column empty for most of them. With some search in Google, I found out that these services were important, DHCP DNS Net logon Network connection Network location Awareness TCP/IP Net BIOS Helper none of them, except Network Connections are working, they do not start. The event viewer of my system shows a bunch of 7000 and 7001 event errors. I have tried re installing the network driver, booting in safe mode with networking and tried to enable those services mentioned above. I had disabled System Restore some time back, so I have no restore points for my system. I tried a lot of things from Google searches but none of them worked. Also, with such a long list of issue, I am a little confused as to what should I search on the internet. :( One more thing I would like to mention, previous morning, my anti-virus Avast detected a RootKit buried deep in my system folders. It was removed, but maybe this was a problem caused by the root kit. I did run a boot-time scan but no viruses were found. Please please please advice. Is formatting and re-installation of Windows my only option?

    Read the article

  • Not able to see Videos in Windows Vista.

    - by Amby
    I can run all different formats of videos in all different players but i dont get to see video in any, i can just hear the audio. Is it because of some codec or some missing driver? Also, i can see the videos online by running on any browser. Please help. Thanks.

    Read the article

  • VM using a secondary graphic card

    - by Arthur
    Hi everyone, at the moment i have a dual monitor setup on my main PCIe gfx card. I know that on windows it is almost impossible to have a second card (eg no thrills PCI card) running without having an SLI motherboard because of a driver issue. Well this was my conclusion after many weeks of research. I was thinking...is it possible to use a VM in order to utilize the secondary card as the default video output to feed another monitor? let me know if you want me to clarify Thanks :)

    Read the article

  • Understanding exim configuration files

    - by bobobobo
    So, I want to understand what's going on with this Exim configuration directory. In /etc/exim4, there's: * exim4.conf.template * update-exim4.conf.conf * conf.d The conf.d has a mess of directories and files, and inside each are a bunch of if statements which I find really different. For example: maildir_home: debug_print = "T: maildir_home for $local_part@$domain" driver = appendfile .ifdef MAILDIR_HOME_MAILDIR_LOCATION directory = MAILDIR_HOME_MAILDIR_LOCATION .else directory = $home/Maildir .endif .ifdef MAILDIR_HOME_CREATE_DIRECTORY create_directory .endif .ifdef MAILDIR_HOME_CREATE_FILE My question is, where do the CAPS VARIABLES get defined how can I change them why are there so many if statements in these configuration files?

    Read the article

  • How to turn off ATI adapter on Acer Timeline 4810G with ubuntu 9.10

    - by netimen
    I can't turn off my ATI adapter. I have applied the fix, but still lspci | grep VGA gives 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] (rev ff) and my power consumption is about 15W (Wi-Fi on). I run ubuntu 9.10, kernel 2.6.31-14-generic. BIOS version 2.30

    Read the article

  • Can 32-bit print drivers work on 64-bit windows?

    - by Matt
    I'm reading around and it seems that 32 bit drivers do not work under 64 bit windows. Is this true? since 32-bit applications can run under 64 bit windows it seems ridiculous that 32-bit printer drivers cannot. Are printer drivers run at the kernel level? Sounds like we're in for driver hell for our RDP environments.

    Read the article

  • Restrict SMB user from changing password

    - by Canadian Luke
    On a server running Debian Wheezy and Samba ver 3 with a tdb backend, how do I restrict a single user from changing the password? This account is one of 2 generic accounts, one for students and one for Teachers on Call (TOC). The users are created, but I'm not deploying the server yet. When looking through Google, I came across setting the maximum password age, but not setting the minumum password age (I'd be happy with a 5 year password...)

    Read the article

  • Ubuntu 9.10 Nvidia GTX 260 x64 installation

    - by klapi
    I think I tried everything I could but I still can't get my Nvidia GTX 260 to run on the newest ubuntu 9.10 x64. Update: I was able to stop the gdm with sudo service gdm stop However, after downloading the latest driver from nvdia - I am told that my video card is not supported.

    Read the article

  • TrueCrypt System Favorite Volume doesn't mount automatically on boot

    - by Anders Hovgaard
    I've encrypted my system partition using TrueCrypt and I've read that I can mount my encrypted data partition (TrueCrypt volume) on boot by making it a "System Favorite" and giving it the same password as the system partition. However it doesn't work and I have to mount it manually every time. See this example. I've tried enabling "Cache pre-boot authentication password in driver memory (for mounting of non-system volumes)" in System - Settings, but that didn't change anything either. Any ideas?

    Read the article

  • Enabling "USB Printing Support" in Windows 7

    - by Kevin Dente
    I'm trying to use an old parallel-port based printer with a USB-to-parallel port adapter on Windows 7. When I plug it into the USB port on the computer it's listed as an unrecognized device. I know that these cables typically use the "USB Printing Support" driver with makes USB ports show up as printer ports in the printer dialog. Is there a way to manually add USB Printing Support to Windows 7, since it isn't being added automatically?

    Read the article

  • What should I do about this user?

    - by Tim Brigham
    What should I do about this user? The user is: Downloading pornography Attempting unauthorized access Running hacking software Sending unsolicited email Installing software / tampering with the system etc This is intended as a generic answer for employee behavioral problems, a la Can you help me with my software licensing question? I could see where acceptable use issues are a touch out of scope for SF, however it is one of those things most sysadmins will run into. I don't want to keep rewriting similar answers.

    Read the article

  • Can not get sound over hdmi in kubuntu 9.10

    - by user32509
    I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :) Edit: lspci -v ... 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Giga-byte Technology Device a022 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at ea400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel ... cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.20. lsmod | grep snd_hda_intel snd_hda_intel 31880 2 snd_hda_codec 87584 2 snd_hda_codec_realtek,snd_hda_intel snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd 77096 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device snd_page_alloc 10928 2 snd_hda_intel,snd_pcm I think I am missing the something-hdmi module? Is there such a thing?

    Read the article

  • Problem with Ubuntu 10.04 and ATI

    - by Maximilinao
    I'm having a problem installing the drivers from the video card. Just finished installing the driver, reboot my OS, and my monitor is starting off in energy saving mode and does not boot Ubuntu. What I can do? Sorry for my English. I used the Google translator.

    Read the article

  • Trouble installing Windows Embedded Standard 2009

    - by Tim
    Getting the following error when attempting to install: Error attempting to create the destination file: C:\Windows Embedded Data\Repositories\{25C88912-9870-4686-97CE-8244C A1B0DAB}.CAB. System error code: 5 Code 5 looks to be an "Access denied" issue. Not sure if this is a generic Windows error, or specific to this install. Any insight is appreciated! -Tim

    Read the article

  • Solaris: a simple script does not work, single command does

    - by CSG
    In my Solaris Illumos, I run a simple script: update_drv -a -i '[myhardware]' [driver] svcadm disable stmf svccfg import /mypath/myconfig svcadm enable stmf It does not work and gives me no error. The service stmf goes in maintenance mode and I must reboot! I've discovered that if I run the single commands from console, it works but if I put it into a script, it works only the first line. Can you explain this behavior?

    Read the article

  • Enabling "USB Printing Support" in Windows 7

    - by Kevin Dente
    I'm trying to use an old parallel-port based printer with a USB-to-parallel port adapter on Windows 7. When I plug it into the USB port on the computer it's listed as an unrecognized device. I know that these cables typically use the "USB Printing Support" driver with makes USB ports show up as printer ports in the printer dialog. Is there a way to manually add USB Printing Support to Windows 7, since it isn't being added automatically?

    Read the article

  • Mouse won't work in XP on Latitude

    - by Kyle Brandt
    I have a Latitude D630 Laptop with a Fresh Windows XP install that won't work with a generic external USB mouse. It recognizes the device has been put in but fails to install it. USB keyboards work fine I have tried restarting the laptop Tried starting the machine without the docking station and plugging directly into the laptop Don't have the original CD, but I installed drives from the Dell website until there were no ? icons Tried deleting the USB mouse device and plugging it again

    Read the article

  • Ubuntu 9.10 upgraded with Internet connection fail

    - by Neofizz
    I am pretty sure that the latest Ubuntu release does not support my wireless internet card. Everything was working fine in 9.04 and since upgrading my browser will load web pages. I can see and connect to my wep encrypted network. I can ping google.com and lose no packets. I am at the end of my tether, what else can I try? Is it possible to download a driver to re-enable my wireless?

    Read the article

  • Triple monitor setup in linux

    - by Brendan Abel
    I'm hoping there are some xorg gurus out there. I'm trying to get a three monitor setup working in linux. I have 2 lcd monitors and a tv, all different resolutions. I'm using 2 video cards; a 9800 GTX and 7900Gt. I've seen a lot of different posts about people trying to make this work, and in every case, they either gave up, or Xinerama magically solved all their problems. Basically, my main problem is that I cannot get Xinerama to work. Every time I turn it on in the options, my machine gets stuck in a neverending boot cycle. If I disable Xinerama, I just have three Xorg screens, but I can't drag windows from one to the other. I can get the 2 lcds on Twinview, and the tv on a separate Xorg screen no problem. But I don't really like this solution. I'd rather have them all on separate screens and stitch them together with Xinerama. Has anyone done this? Here's my xorg.conf for reference. p.s. This took me all of 30 seconds to set up in Windows XP! p.s.s. I've seen somewhere that maybe randr can solve my problems? But I'm not quite sure how? Section "Monitor" Identifier "Main1" VendorName "Acer" ModelName "H233H" HorizSync 40-70 VertRefresh 60 Option "dpms" EndSection #Section "Monitor" # Identifier "Main2" # VendorName "Acer" # ModelName "AL2216W" # HorizSync 40-70 # VertRefresh 60 # Option "dpms" #EndSection Section "Monitor" Identifier "Projector" VendorName "BenQ" ModelName "W500" HorizSync 44.955-45 VertRefresh 59.94-60 Option "dpms" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nvidia" BusID "PCI:5:0:0" BoardName "nVidia Corporation G92 [GeForce 9800 GTX+]" Option "ConnectedMonitor" "DFP,DFP" Option "NvAGP" "0" Option "NoLogo" "True" #Option "TVStandard" "HD720p" EndSection Section "Device" Identifier "Card2" Driver "nvidia" VendorName "nvidia" BusID "PCI:4:0:0" BoardName "nVidia Corporation G71 [GeForce 7900 GT/GTO]" Option "NvAGP" "0" Option "NoLogo" "True" Option "TVStandard" "HD720p" EndSection Section "Module" Load "glx" EndSection Section "Screen" Identifier "ScreenMain-0" Device "Card1-0" Monitor "Main1" DefaultDepth 24 Option "Twinview" Option "TwinViewOrientation" "RightOf" Option "MetaModes" "DFP-0: 1920x1080; DFP-1: 1680x1050" Option "HorizSync" "DFP-0: 40-70; DFP-1: 40-70" Option "VertRefresh" "DFP-0: 60; DFP-1: 60" #SubSection "Display" # Depth 24 # Virtual 4880 1080 #EndSubSection EndSection Section "Screen" Identifier "ScreenProjector" Device "Card2" Monitor "Projector" DefaultDepth 24 Option "MetaModes" "TV-0: 1280x720" Option "HorizSync" "TV-0: 44.955-45" Option "VertRefresh" "TV-0: 59.94-60" EndSection Section "ServerLayout" Identifier "BothTwinView" Screen "ScreenMain-0" Screen "ScreenProjector" LeftOf "ScreenMain-0" #Option "Xinerama" "on" # most important option let you window expand to three monitors EndSection

    Read the article

  • How can I transfer a user state of a win7 machine that won't boot?

    - by askvictor
    I have a windows 7 machine that won't boot completely, even in safe mode. I want to re-image the machine using a generic software image, but would like to keep the user data (including settings etc) that are on there ala Windows Easy Transfer. I can mount the hard disk on another machine - can I use Easy Transfer to transfer the user state of an account on the non-booted OS? Or do I need explore USMT?

    Read the article

  • LAN connection loses network access randomly

    - by bill11
    Hi, Windows 7 is a great OS but there are some problems which should be solved from Microsoft as fast as possible. On my Computer the LAN connection randomly loses its connection. I don't know why but I think this problem depends on my network driver which is only available for Windows XP (where it always worked perfectly). I can not reproduce this issue. Has anybody here had the same problem?

    Read the article

  • How to prevent dual booted OSes from damaging each other?

    - by user1252434
    For better compatibility and performance in games I'm thinking about installing Windows additionally to Linux. I have security concerns about this, though. Note: "Windows" in the remaining text includes not only the OS but also any software running on it. Regardless of whether it comes included or is additionally installed, whether it is started intentionally or unintentionally (virus, malware). Is there an easy way to achieve the following requirements: Windows MUST NOT be able to kill my linux partition or my data disk neither single files (virus infection) nor overwriting the whole disk Windows MUST NOT be able to read data disk (- extra protection against spyware) Linux may or may not have access to the windows partition both Linux and Windows should have full access to the graphics card this rules out desktop VM solutions for gaming I want the manufacturer's windows graphics card driver Regarding Windows to be unable to destroy my linux install: this is not just the usual paranoia, that has happened to me in the past. So I don't accept "no ext4 driver" as an argument. Once bitten, twice shy. And even if destruction targeted at specific (linux) files is nearly impossible, there should be no way to shred the whole partition. I may accept the risk of malware breaking out of a barrier (e.g. VM) around the whole windows box, though. Currently I have a system disk (SSD) and a data disk (HDD), both SATA. I expect I have to add another disk. If i don't: even better. My CPU is a Intel Core i5, with VT-x and VT-d available, though untested. Ideas I've had so far: deactivate or hide other HDs until reboot at low level possible? can the boot loader (grub) do this for me? tiny VM layer: load windows in a VM that provides access to almost all hardware, except the HDs any ready made software solution for this? Preferably free. as I said: the main problem seems to be to provide full access to the graphics card hardware switch to cut power to disks commercial products expensive and lots of warnings against cheap home built solutions preferably all three hard disks with one switch (one push) mobile racks - won't wear of daily swapping be a problem?

    Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >