Search Results

Search found 13164 results on 527 pages for 'missing'.

Page 201/527 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

• Multicasting Windows 7 Image

  - by LawnChairSkank

  I am trying to deploy some new machines with windows 7 for the first time in our computer labs. We used to use third party imaging software and then run sysprep after the image was copied(XP), but it seems you can't go that route with windows 7. We set up a new imaging server with the windows system image manager, but when we try to multicast the image it pretty much takes down our whole staff and faculty network. I heard you can turn on a multicast feature on our cisco switches to help with the issue, but that it also slows the switches to a crawl. Another idea we have tried was pulling the the computer lab switch off the main network and plugging the imaging server directly into the computer lab switch so the multicast doesn't take down our network, but it doesn't seem to work without being able to hit a domain controller. Is there a way to multicast without taking out the network? I feel like I am missing something... Thanks in advance

  Read the article

• Untangle VPN setup, how to see internal addresses?

  - by NFS user

  So Untangle is setup as the default gateway at 192.168.100.1/24, it is the authorative DHCP server issuing addresses from 192.168.100.100 to 192.168.100.200 and is successfully connected to the Internet. Untangle uses OpenVPN for remote access. Accessing the VPN gives me the address 192.168.40.5. However, I cannot ping any machines on the internal 192.168.100.x network remotely. Clearly, there is something basic that I am missing. What is it and how is it solved? Update: The VPN was not setup with the internal network. Since Untangle only allows editing the VPN setup once, the VPN had to be removed and reinstalled with the internal network exported. Now it works. The lesson is that the internal network must be setup before configuring the VPN.

  Read the article

• Link to a folder in the top Ubuntu panel

  - by Seamus

  Hi. I like the little top panel thing in Ubuntu. I have links to all my most used programs on there. (Which is why I don't see the point of docky or any of those things: they seem to do the same job, but they're messier). What I'd like is to have a little icon for my documents folder up there too. But I don't seem to be able to do it. It's not one of the options listed when you go to "add to panel...". Am I missing something ridiculously easy?

  Read the article

• Setting subversion "password-stores" does nothing?

  - by Coderer

  The Subversion documentation says that I can set a parameter in ~/.subversion/config like [auths] password-stores = gnome-keyring to have it cache my certificate password in gnome-keyring. I set the option, and nothing happens -- no error messages, no change in behavior, nothing. Maybe I'm missing a log somewhere? I know subversion has to be compiled to support this but AFAIK I'm using the RPM version, which (they say...) ships with it rolled in. Is there a way to check whether my binary supports keyring? Shouldn't it say something if it doesn't?

  Read the article

• Reducing CPU load to absolute minimum [on hold]

  - by user191338

  I have had a couple of things gone missing I believe stolen in my shared apartment and want to run my laptop constantly with a webcam attached, running webcam surveillance software to record/ take pictures when motion is sensed. Id like to take whatever steps are necessary to be able to run the laptop constantly without the fan coming on, as its quite loud and even though it will be hidden it can be heard. Thus Id like to know what steps I can take to reduce CPU to the bare minimum for the laptop to boot up and run the camera software and send images via ftp / email when necessary. I have windows 7 installed, though I can reinstall it clean. Which are the windows services can I turn off, and more extreme disabling or measures of whatever kind which I can take. The OS would need to run the camera, wifi / networking. Thanks very much for any help.

  Read the article

• Add "secure" in cookie by httpd server

  - by Abhishek

  How do I have to configure my httpd server to add "Secure" in the cookies? I tried the one in the below link, http://blog.modsecurity.org/2008/12/fixing-both-missing-httponly-and-secure-cookie-flags.html but this did not seem to be working. I inspected the cookie via firebug and found that the cookies have "HttpOnly" but not "Secure". I double checked the configurations and they the same as mentioned in the link. I also noticed that the server response time goes bit high when doing it by mod_security. Is there a better way to do it? Any ideas or pointers to configurations would be helpful

  Read the article

• tool for advanced ID3 tags handling and audio files ordering

  - by Juhele

  I have following problem – some of my files do not have complete ID3 tags and some have typos or small differences in writing - so finally, my portable player sees “Mr. President” as different artist from “Mr President” and so on. I would need some tool which could search similar tags and then allow me to correct the typos or for example override “artist” in all selected files by manually entered text. The same with empty tag items – sometimes, the track name, album etc. is OK, but artist is missing etc. Without touching the audio quality, of course (but this should be no problem, I think). I already tried tools in Winamp, Songbird and other players and currently most advanced free tool I tried is Tagscanner. However, it is not able to to solve the problem with similar tags. Do you know such tool? Preferably free and for Windows, if possible. However, if you know some commercial app able to do this, please let me know.

  Read the article

• Select firefox search result

  - by Nicolas C.

  I am working on a daily basis on a web application with very large menus. Also doing lots of other Excel manipulations, copy and pasting, etc., I am quite fond of keyboard shortcuts as much faster than using the mouse to point, double-click and then going back to my keyboard etc. Hence, my question is quite simple, does anyone know if there is any shortcut under Firefox which would let me actually select (and not highlight) in my web page the search result so that I can for instance do the following manipulation sequence? [Ctrl]+[F] type the search string, for instance 'regional_unit' the missing shortcut to actually select in my page the string which is currently highlighted thanks to the search feature of FF [Space] or [Enter] key to activate the web element which in my case would systematically correspond to a link or button, etc. May be there would be an addon replacing the default search feature, I don't know... I tried to look over the internet but with the words I am using for this investigation, I do not get relevant search results under Google :(. Thanks a lot

  Read the article

• Backup Script - Could Not Open Input File

  - by Iestyn

  this is the backup script that I've got going: http://pastebin.com/4g4E6wUz This is the cron info: /usr/local/bin/php /home/backups/backup-db.php --filename-dated ALL No matter what I do, I keep on getting this error: Could not open input file: /home/backups/backup-db.php - That's the correct location of the file. I just don't know what else to try, I feel I've been working on this for so long now that I've explored every avenue, on the other hand sometimes I think that the time I've spent on it is clouding my thoughts and I'm missing something stupidly obvious. Just wondering if someone can give me a few pointers? Also on a last note, does anyone know of a way/article to auto generate a full backup of cPanel every * amount of days and store it in a location that I want? Kind Regards.

  Read the article

• cant make outbound calls - asterisk

  - by deanvz

  I have a basic Atcom IP01 with the following config Registered Voip (SIP) Trunk Registered Voip Phone - ext Dial Plan Outbound Call rule I made use of this manual that the manufacturer supplies: http://www.atcom.cn/cn/download/pbx/ip01/ATCOM%20IP01-User%20Manual-V1.0-EN.pdf Whenever I try and make a call, it seems that the outbound call rule that i defined does not get regarded as the default rule even though the dial plan lists this as the only outbound call rule. When dialling I see in the log file the following [Jan 1 09:10:07] NOTICE[176]: chan_sip.c:14377 handle_request_invite: Call from '6001' to extension '00765243679' rejected because extension not found. The 00765243679 is a cellular number. Am I missing a configuration in order to make outbound calls? Land line, other Voip numbers and cellular calls have been tried

  Read the article

• Routing using Linux with 2 NIC cards

  - by Kevin Parker

  Configured Clear OS to be in Gateway mode on a machine with two NIC cards. eth0:192.168.2.0/24 with ip 192.168.2.27 which is connected to a modem and thus have internet connectivity. eth1:192.168.122.0/24 with ip 192.168.122.10 which is connected to other machines in LAN through switch. LAN machines with network 192.168.122.0 is not getting internet.How can they get internet Through Clear OS gateway.I have enabled packet forwarding in clear os using "ip_forward=1" What am i missing?.Can you please help me in this. Following are the static routing i have added: on LAN machine1 with ip address 192.168.122.11 ip route add 192.168.2.0/24 via 192.168.122.10 dev eth0 ip route show 192.168.2.0/24 via 192.168.122.10 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.11 But still 192.168.2.0/24 network is not reachable.Where can be the problem??

  Read the article

• Problems with Black Box KVM

  - by MrWizard54

  I just recieved a shipment of equipment orderd by my predicessor that includes brand new Dell Optiplex 990 computers, with standard mice and keyboards. Also included were Black Box ServSwitch Secure KVMs. I've worked with KVMs before and hypothetically they should be the easiest thing in the world to deal with, plug it all together, push the button, go. However, for the life of me I can't get the computers to recognize the mouse or keyboard when plugged into the KVM. We've seen this with multiple KVMs across the order. Any one know what I'm missing? Computers are all Dell 990 with Windows 7.

  Read the article

• Connecting office to data center via Metro-ethernet

  - by Eric

  I am installing a metro ethernet link from my office to my data center. The office will have a cisco 3750 with several vlans. The data center end will have a more complicated set up. The metro e from the office will connect to a 2960, which will have two other 2960s with a few vlans and a 2811 router connected to it for connectivity to our other environments and the internet. I am looking at implementing this by connecting the office 3750 and the data center 2960 with a dot1q trunk and doing all routing at the 2811. I will configure subinterfaces for gateways for each of the vlans on the 2811. I work for a small company and don't have much of a budget for an ideal architecture. I can post a simple diagram if needed for clarification. Is there anything I am missing here? I feel like I am forgetting something very basic and want to make sure I eliminate any boneheaded mistakes.

  Read the article

• Very high memory usage, but not claimed by any process?

  - by SharkWipf

  While stress-testing LVM on one of our Debian servers, I came across this issue where memory would fill up a lot to the point where it would run the server out of memory, but no process would claim the memory. See http://i.imgur.com/cLn5ZHS.png, and see http://serverfault.com/a/449102/125894 for an explanation on the colors used in htop. Why is this happening? And is there any way to see what process is using the memory? Htop is configured not to hide any processes, so what is it that htop is missing? In this particular case, I can fairly certainly say that it is caused, directly or indirectly, by lvmcreate, lvmremove or dmsetup, as I was stress-testing that. Do note that this question is not about solving the LVM problem, but about why the memory isn't claimed by any process. Stopping all LVM commands does bring the memory back down to <600MB.

  Read the article

• What are steps to upgrade an cisco UCS B series system vmware vsphere from 4.1 to 5.0

  - by Gk.

  I have a Cisco UCS B-series system with 1.4 firmware running vsphere 4.1 (ESX) + Nexus 1000V. I want upgrade all that stuff to vsphere 5.0 without downtime. I tried to find any documentation describe all steps needed to do it, but cannot found anything clear. Here is my plan: Upgrade firmware of UCS from 1.4 to 2.0. Doc: http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/upgrading/from1.4/to2.0/b_UpgradingCiscoUCSFrom1.4To2.0.html Upgrade all vcenter, hosts+VEM, virtual machines, datastores using VMWare best practice. Is it OK? Am I missing something? Thank you, giobuon.

  Read the article

• Install Trac Without Setting Up a VirtualHost in Apache?

  - by jobu1324

  I'm trying to set up Trac to test out it's functionality, and the only guides I can find online talk about setting up a VirtualHost. Right now I am under the impression that I need access to a DNS server to properly use the VirtualHost directive, and for various reasons I don't have access to one. Is it possible to set up Trac without setting up a VirtualHost? I haven't had any luck. If I run the site with tracd, it works - which means that at least part of it is set up properly. Right now all I have is an Apache Directory directive pointing to /pathToTracSite/htdocs/, and when I visit the trac location, all I get when viewing the site from a browser is an empty directory (which makes sense, because htdocs/ is empty). My server is running Apache2 I know I'm missing a lot here, because I don't understand Apache the Trac system very well - any help would be appreciated.

  Read the article

• Toshiba satellite u400 hardware buttons, which software?

  - by Kugel

  I've recently intalled Windows 7 64bit onto my Toshiba U400 laptop. I went over to toshiba support-download-drivers page and downloaded every driver that was missing. I chose not to download bloated stuff, only the drivers. Win7 has much better control over hardware buttons out of the box then I had before. But there is one thing that annoys me. I have hardware button on the laptom that is supposed to switch LEDs on/off. Windows 7 turns my sound on/off instead. The second minor thing is, when I turn off sound by pressing Fn+Esc (or light off button;-), the sound is off, however any slight touch with volume wheel turns it right back on! This is something that Ubuntu does also out of the box. I wonder what's the logic behind this. Any lightweight solutions to these out there? Thank you

  Read the article

• Add entire 300 GB filesystem to Git Annex repository?

  - by Ryan Lester

  By default, I get an error that I have too many open files from the process. If I lift the limit manually, I get an error that I'm out of memory. For whatever reason, it seems that Git Annex in its current state is not optimised for this sort of task (adding thousands of files to a repository at once). As a possible solution, my next thought was to do something like: cd / find . -type d | git annex add --$NONRECURSIVELY find . -type f | git annex add # Need to add parent directories of each file first or adding files fails The problem with this solution is that there doesn't seem from the documentation to be a way to non-recursively add a directory in Git Annex. Is there something I'm missing or a workaround for this? If my proposed solution is a dead end, are there other ways that people have solved this problem?

  Read the article

• duplicity can't find remote backup directory?

  - by leeand00

  Using my private key to do so, this command allows me to connect to /home/backupUser/backup just fine: $ sudo sftp -oPort=7843 [email protected]:backup However when I run duplicity, I get the following error: duplicity full --exclude ... / scp://backupUser:[email protected]:7843:/backup bash: [email protected]:7843./backup: No such file or directory I'm under the assumption that duplicity would interpret the /backup path as relative to the user's home directory. But since the above command didn't work, I also tried leaving off the / in the backup directory at the end of the command, i.e. duplicity full --exclude ... / scp://backupUser:[email protected]:7843:backup bash: [email protected]:7843:backup: command not found Is there something I'm missing here, like adding the passcode for the private key to make this command work?

  Read the article

• How do laptop battery voltages affect runtime?

  - by Bigbio2002

  I ordered a new battery for my faithful XPS M1710. I'm not sure of the voltage of the battery I have now, but the new one that the Dell rep got me (after 3-4 times confirming my phone number and laptop model number) is 14.8v. I was a bit concerned about potential incompatibilities (as most of the other compatible batteries listed were 11.1v), but I figure that there's no way that Dell would "recommend" batteries that wouldn't work or fry your system. Now, my question is, how does voltage affect battery life? If we assume the needed power draw to be constant, a higher voltage would indicate less amperage needed, therefore the battery would last longer before running out, yes? Or am I missing something? For reference: P=I*V P = power I = current V = voltage (duh)

  Read the article

• Powershell Foreach-Object with if statement not working - help!

  - by Dmart

  I have a batch file that takes a computer name as its argument and will install Java JRE on it remotely. Now, Im trying to run this Powershell script to repeatedly call the batch file and install Java on any system that it finds without the latest version. It seems to run error-free, but the statements inside the if code block never seem to run - even when the if conditional test evaluates to true. Can anyone look at this script and point out what I'm possibly missing? I'm using the Quest AD cmdlets, and BSOnPosh module. Thank you. get-qadcomputer -sizelimit 0 -name mypc* -searchroot 'OU=MyComputers,DC=MyDomain,DC=lcl'| test-host -property name |ForEach-Object -process { $targnm = $_.name $tststr=reg query "\\$targnm\HKLM\SOFTWARE\JavaSoft\Java Runtime Environment" /v Java6FamilyVersion if(-not ($tststr | select-string -SimpleMatch '1.6.0_20')) { $mssg="Updating to JRE 6u20 on $targnm" Out-Host $mssg Out-File -filepath c:\install_jre_log.txt -inputobject $mssg -Append cmd /c \\server\apps\java\installjreremote.cmd $targnm } else { $mssg ="JRE 6u20 found on $targnm" Out-Host $mssg Out-File -filepath c:\install_jre_log.txt -inputobject $mssg -Append } }

  Read the article

• Preventing logrotate's dateext from overwriting files

  - by Thirler

  I'm working with a system where I would like to use the dateext function of logrotate (or some other way) to add the date to a logfile when it is rotated. However in this system it is important that no logging is missing and dateext will overwrite any existing files (which will happen if logrotate is called twice on a day). Is there a reliable way to prevent dateext to overwrite existing files, but instead make another file?. It is acceptable that either no rotate happens or a file is created with a less predictable name (date with an extra number, or the time or something).

  Read the article

• Should I impersonate PHP via FastCGI?

  - by AKeller

  I am installing the latest version of PHP onto IIS 7.5 via FastCGI, and all of the instructions say that FastCGI should impersonate the calling client by setting fastcgi.impersonate = 1 If my website will have this configuration dedicated application pool application pool identity of ApplicationPoolIdentity anonymous authentication only (as IUSR) why do I want to impersonate? I come from an ASP.NET background, where the IUSR gets read-only permissions and the application pool identity gets any write permissions. Giving write access to the IUSR usually opens the door for WebDAV vulnerabilities. So I hesitate to let PHP run as the IUSR. I can't find many people asking this question (1 | 2) so I think I must be missing something. Can someone clarify this for me?

  Read the article

• Is there a way to automate testing for a GNS3 network topology?

  - by Chedy2149

  I'm working on an MPLS backbone topology using GNS3, this topology includes configuration of several networking technologies such as IPv6, BGP, OSPF, IPv6 to IPv4 dynamic tunneling, MPLS based VPNs, MPLS based traffic engineering... So I'm a beginner with basic knowledge in networking (Ipv4 addressing, basic routing and switching) and I can't just easly test if my topology works or not, moreover fiddling with configuration I've noticed that sometimes when getting MPLS config right and missing BGP config all my topology is messed up. Given that I use Cisco 7200 series routers, is there any way to build a test harness for my topology in order to guarentee correctness with a single push button automated process?

  Read the article

• Are there any free Windows based BluRay players out there?

  - by joshcomley

  I have a BluRay drive in my PC, and I'm wondering what the cheapest way to actually get it to play a movie is (I didn't expect this to be trouble). I'm using Windows 7. I installed CyberLink PowerDVD 8 (I'm currently downloading 10 but it's taking a very, very long time) and I get the below "error" when trying to watch a BluRay movie: CyberLink PowerDVD is not able to play the protected content on your digital output device. Please switch to an analog output (VGA, D-Sub) and then try again. I can't get VLC to play it and my research yields no plugins for VLC to enable it either - unless I'm vastly missing something. Help!

  Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >