Search Results

Search found 111890 results on 4476 pages for 'git update server info'.

Page 2015/4476 | < Previous Page | 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022  | Next Page >

• Why are my socks proxies slow

  - by vps_newcomer

  I have a linux vps, and i have tried a few socks proxy setups to test their performance: All tests were using speedtest.net The standard ssh tunnel proxy 0.8mbit/s download and 0.1-0.2mbit/s upload speeds dante-server proxy 1.3mbit/s download and 0.4-0.5mbit/s upload I am wondering why are these speeds so slow? Is anything shaping them? Is it just the nature of socks proxies? I know that the ssh tunnel has to do encryption and what not so that is why its slow, but i was surprised to see that the second setup was also quite slow. On the VPS i have received download speeds of 25MB/s per second (thats about 200mbit/s and upload speed of atleast 5MB/s (haven't got a good enough pipe to test anything faster). The other option i was going to try is to setup OpenVPN and see how that goes, however i need to find a good tutorial as it's fairly complicated to setup. So why is it so slow? How can i test to see where the bottleneck is? How can i make it faster :D

  Read the article

• How can Django/WSGI and PHP share / on Apache?

  - by Mark Snidovich

  I have a server running an established PHP site, as well as some Django apps. Currently, a VirtualHost set up for PHP listens on port 80, and requests to certain directories are proxied to a VirtualHost set up for Django with WSGI. I'd like to change it so Django handles anything not existing as a PHP script or static file. For example, / -parsed by PHP as index.php /page.php -parsed as PHP normally /images/border.jpg -served as a static file /johnfreep -handled by Django (interpreted by urls.py) /pages/john -handled by Django /(anything else) - handled by Django I have a few ideas. It seems the options are 'php first' or 'wsgi first'. set up Django on port 80, and set Apache to skip all the known PHP, CSS or image files. Maybe using SetHandler? Anything else goes to Django to be parsed by urls.py. Set up a script referring everything to Django as a 404 handler on PHP. So, if a file is not found for a name, it sends the request path to a VirtualHost running Django to be parsed.

  Read the article

• Cannot change PostgreSQL port

  - by Jerec TheSith

  I run Postgresql 8.4 as a service on a CentOS 6.2 server. I set port = 21444 and listen_addresses = '*' in /var/lib/pgsql/data/postgresql.conf and I changed 5432 to 21444 in postmaster.opts and restarted postgres, but when I run netstat -lntp postgresql is still running on port 5432 tcp 0 0 0.0.0.0:5432 0.0.0.0:* LISTEN 20276/postmaster When I restart postgresql I get a writting error warning on /proc/self/oom_adj, but the service starts anyway. I read that we could get this error when using virtualized servers, but I don't really know if this has inpact on postgresql listening port. The correct pgsql config file is loaded in /var/lib/pgsql/data : [root@srv02 ~]# ps -ef | grep postgres root 1358 22140 0 09:42 pts/0 00:00:00 grep postgres postgres 9519 1 0 Mar16 ? 00:00:01 /usr/bin/postmaster -p 5432 -D /var/lib/pgsql/data postgres 9573 9519 0 Mar16 ? 00:00:00 postgres: logger process postgres 9575 9519 0 Mar16 ? 00:00:05 postgres: writer process postgres 9576 9519 0 Mar16 ? 00:00:03 postgres: wal writer process postgres 9577 9519 0 Mar16 ? 00:00:01 postgres: autovacuum launcher process postgres 9578 9519 0 Mar16 ? 00:00:01 postgres: stats collector process any thought ? thanks, Jerec

  Read the article

• Can't get rsync over sftp to work

  - by Patrik

  I'm trying to set up a backup system from an Ubuntu server to a Synology NAS (DS413j) using rsync and sftp. I have created a user for this that we can call ubuntu-backup. I have a directory in ubuntu-backup home directory called www where the backup will be saved. I have enabled Network Backup in DSM The user ubuntu-backup has full access to it's home directory Here is my rsync config file on the Synology NAS: #motd file = /etc/rsyncd.motd #log file = /var/log/rsyncd.log pid file = /var/run/rsyncd.pid lock file = /var/run/rsync.lock use chroot = no [NetBackup] path = /var/services/NetBackup comment = Network Backup Share uid = root gid = root read only = no list = yes charset = utf-8 auth users = root secrets file = /etc/rsyncd.secrets [ubuntu-backup] path = /volume1/homes/ubuntu-backup/www comment = Ubuntu Backup uid = ubuntu-backup gid = users read only = false auth users = ubuntu-backup secrets file = /etc/rsyncd.secrets The permissions on /volume1/homes/ubuntu-backup/www is ubuntu-backup:users 777 Here is the command i'm running. rsync -aHvhiPb /var/www/ [email protected]:./ The result: sending incremental file list ERROR: module is read only rsync error: syntax or usage error (code 1) at main.c(1034) [Receiver=3.0.9] rsync: connection unexpectedly closed (9 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(605) [sender=3.0.9] If I'm running this: rsync -aHvhiPb /var/www/ [email protected] It looks like its sending files. No errors. But I cant find anything on the NAS.

  Read the article

• ESX hosts lose connectivity with iSCSI SAN LUNs

  - by Themist

  I've been experiencing this issue for a couple of months now where my ESX hosts lose connectivity with my iSCSI SAN vmfs volumes. As a results the ESX hosts enter a nonresponsive mode the associated VMs disconnect and the only remedy is to reboot the host. This issue happens randomly . I have escalated this issue with VMWare but I haven't had any solution to the issue yet. I see no errors on my switches and there are no hardware issues as well. My SAN infrastucture is solid and there are 2 paths for every vmfs volume. Did anybody else experienced a similar issue? edit: Here are some more details: The iSCSI SAN software is Datacore Sanmelody 2.0.4.2 running on 2 HP Proliant G5 servers. The storage attached to each of the servers is an HP MSA70 and all the iSCSI SAN Volumes that are presented to my 4 ESX hosts are mirrored. I have two iSCSI swithces HP Procurve 1800G-24 that are trunked together. My SANLELODY servers are using NC360T NICs. I team two NICs and have one cable connecting to each iSCSi switch. Each ESX server uses two NICs as well for the iSCSI Network.

  Read the article

• Moving Zend Framework 2 from apache to nginx

  - by Aleksander

  I would like to move site that uses Zend Framework 2 from Apache to Nginx. The problem is that site have 6 modules, and apache handles it by aliases defined in httpd-vhosts.conf, #httpd-vhosts.conf <VirtualHost _default_:443> ServerName localhost:443 Alias /develop/cpanel "C:/webapps/develop/mil_catele_cp/public" Alias /develop/docs/tech "C:/webapps/develop/mil_catele_tech_docs/public" Alias /develop/docs "C:/webapps/develop/mil_catele_docs/public" Alias /develop/auth "C:/webapps/develop/mil_catele_auth/public" Alias /develop "C:/webapps/develop/mil_web_dicom_viewer/public" DocumentRoot "C:/webapps/mil_catele_homepage" </VirtualHost> in httpd.conf DocumentRoot is set to C:/webapps. Sites are avialeble at for example localhost/develop/cpanel. Framework handles further routing. In Nginx I was able to make only one site available by specifing root C:/webapps/develop/mil_catele_tech_docs/public; in server block. It works only because docs module don't depend on auth like others, and site was at localhost/. In next attempt: root C:/webapps; location /develop/auth { root C:/webapps/develop/mil_catele_auth/public; try_files $uri $uri/ /develop/mil_catele_auth/public/index.php$is_args$args; } Now as I enter localhost/develop/cpanel it gets to correct index.php but can't find any resources (css,js files). I have no Idea why reference paths in browswer's GET requsts changed to https://localhost/css/bootstrap.css form https://localhost/develop/auth/css/bootstrap.css as it was on apache. This root directive seems not working. Nginx handles php by using fastCGI location ~ \.(php|phtml)?$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param APPLICATION_ENV production; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } I googled whole day, and found nothing usefull. Can someone help me make this configuration work like on Apache?

  Read the article

• how to set cache control to public in iis 7.5

  - by ivymike

  I'm trying to set cache control header to max age using the following snippet in my web.config: <system.webServer> <staticContent> <clientCache cacheControlMode="UseMaxAge" cacheControlMaxAge="1.00:00:00" /> </staticContent> </system.webServer> Some how this isn't being reflected in the response. Instead I see a Cache-Control: private header on the responses. I'm using NancyFx framework (which is a layer on top of Asp.net). Is there any thing else I need to do ? Below are the reponse headers I receive: HTTP/1.1 200 OK\r\n Cache-Control: private\r\n Content-Type: application/x-javascript\r\n Content-Encoding: gzip\r\n Last-Modified: Mon, 19 Mar 2012 16:42:03 GMT\r\n ETag: 8ced406593e38e7\r\n Vary: Accept-Encoding\r\n Server: Microsoft-IIS/7.5\r\n Nancy-Version: 0.9.0.0\r\n Set-Cookie: NCSRF=AAEAAAD%2f%2f%2f%2f%2fAQAAAAAAAAAMAgAAADxOYW5jeSwgVmVyc2lvbj0wLjkuMC4wLCBDdWx0dXJlPW5ldXRyYWwsIFB1YmxpY0tleVRva2VuPW51bGwFAQAAABhOYW5jeS5TZWN1cml0eS5Dc3JmVG9rZW4DAAAAHDxSYW5kb21CeXRlcz5rX19CYWNraW5nRmllbGQcPENyZWF0ZWREYXRlPmtfX0JhY2tpbmdGaWVsZBU8SG1hYz5rX19CYWNraW5nRmllbGQHAAcCDQICAAAACQMAAADTubwoldTOiAkEAAAADwMAAAAKAAAAAkpT5d9aTSzL3BAPBAAAACAAAAACPUCyrmSXQhkp%2bfrDz7lZa7O7ja%2fIg7HV9AW6RbPPRLYLAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA%3d; path=/; HttpOnly\r\n X-AspNet-Version: 4.0.30319\r\n Date: Tue, 20 Mar 2012 09:44:20 GMT\r\n Content-Length: 1624\r\n

  Read the article

• ssh without password does not work for some users

  - by joshxdr

  I have a new RHEL4 Linux box that I am using to copy data to old Solaris 2.6 and RHEL3 Linux boxes with scp. I have found that with the same setup, it works for some users but not for others. For user jane, this works fine: jane@host1$ ssh -v remhost debug1: Next authentication method: publickey debug1: Trying private key: /mnt/home/osborjo/.ssh/identity debug1: Offering public key: /mnt/home/osborjo/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 277 debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). for user jack it does not: jack@host1 ssh -v remhost debug1: Next authentication method: publickey debug1: Trying private key: /mnt/home/oper1/.ssh/identity debug1: Offering public key: /mnt/home/oper1/.ssh/id_rsa debug1: Authentications that can continue: publickey,password,keyboard-interactive I have looked at the permissions for all the keys and files, they look the same. Since I am using home directories mounted by NFS, the keys for both the remote host and the local host are in the same directory. This is how things look for jane: jane@host1$ ls -l $HOME/.ssh -rw-rw-r-- 1 jane operator 394 Jan 27 16:28 authorized_keys -rw------- 1 jane operator 1675 Jan 27 16:27 id_rsa -rw-r--r-- 1 jane operator 394 Jan 27 16:27 id_rsa.pub -rw-rw-r-- 1 jane operator 1205 Jan 27 16:46 known_hosts For user jack: jack@host1$ ls -l $HOME/.ssh -rw-rw-r-- 1 jack engineer 394 Jan 27 16:28 authorized_keys -rw------- 1 jack engineer 1675 Jan 27 16:27 id_rsa -rw-r--r-- 1 jack engineer 394 Jan 27 16:27 id_rsa.pub -rw-rw-r-- 1 jack engineer 1205 Jan 27 16:46 known_hosts As a last ditch effort, I copied the authorized_keys, id_rsa, and id_rsa.pub from jill to jack, and changed the username in authorized_keys and id_rsa.pub with vi. It still did not work. It seems there is something different between the two users but I cannot figure out what it is.

  Read the article

• Can I use CNAME with ip address? Why If works (sometimes)?

  - by Maciek Sawicki

  I believe that the easiest answer for the first question is "No, You have "A" for this", but I accidentally setup some subdomain using CNAME pointing to ip address and it worked on few computers in my office. I wonder how it was possible? Now, when I'm checking it from home I have following error: beast:~ viroos$ host somesubdomain.somedomain.com Host somesubdomain.somedomain.com not found: 3(NXDOMAIN) I'm 100% it used to work at my office (currently it looks like it doesn't, but I'm checking it on different machine). Therefore I'm not 100% if it worked due to some special network setup or because I tested it just after adding DNS entry. I know this story sounds, a little crazy/incredibly, but can someone help me solve this puzzle. //edit: I'm adding dig output ; <<>> DiG 9.6-ESV-R4-P3 <<>> somesubdomain.somedomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 60224 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;somesubdomain.somedomain.com. IN A ;; ANSWER SECTION: somesubdomain.somedomain.com. 67 IN CNAME xxx.xxx.xxx.xx1. ;; AUTHORITY SECTION: . 1800 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2012040901 1800 900 604800 86400 ;; Query time: 72 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Tue Apr 10 00:11:01 2012 ;; MSG SIZE rcvd: 136

  Read the article

• pdo_mysql installation

  - by Arsenal

  Hello, On my server I'm trying to instal PHP Projekt (6). This requires pdo_mysql however. I thought this installation of pdo_mysql would be rather straightforward... I tried using pecl (pecl install pdo_mysql) after installing devel etc, but this came up with a permission denied error. I solved this by using directories that were accessible. It then came up with a cant run C compiled programs however. It also says to check config.log for more details but ironically config.log is automatically removed if the installation process fails... When I try to compile and output a "hello world".c however, it works perfectly. I then tried to download the pdo_mysql stuff and install in myself (using configure and make install). This seemed to do the job, but when I restarted my apache ... no sign of pdo_mysql anywhere even though I adjusted my php.ini file I have read somewhere that you need to recompile PHP with the option pdo_mysql enabled. But how does one do that (I'm using CentOS4). And isn't there any other way than that??? Thanks!

  Read the article

• Is wiper.sh working?

  - by Aleksander Blomskøld

  I'm setting up a server running Ubuntu Precise, and I'm trying to verify if SSD TRIM is working. fstrim is failing: ~ sudo fstrim -v / fstrim: /: FITRIM ioctl failed: Operation not supported So I tried wiper.sh in hdparm: wiper-3.5 sudo ./wiper.sh --verbose --commit /dev/sda1 wiper.sh: Linux SATA SSD TRIM utility, version 3.5, by Mark Lord. rootdev=/dev/sda1 fsmode2: fsmode=read-write /: fstype=ext4 freesize = 169502088 KB, reserved = 1695020 KB Preparing for online TRIM of free space on /dev/sda1 (ext4 mounted read-write at /). This operation could silently destroy your data. Are you sure (y/N)? y Creating temporary file (167807068 KB).. Syncing disks.. Beginning TRIM operations.. get_trimlist=/sbin/hdparm --fibmap WIPER_TMPFILE.11503 /dev/sda: trimming 3211263 sectors from 64 ranges succeeded trimming 3571713 sectors from 64 ranges succeeded trimming 3915776 sectors from 64 ranges succeeded (...) trimming 3657913 sectors from 60 ranges succeeded Removing temporary file.. Syncing disks.. Done. It seems to be working, but I'm wondering if it really is. Are there any cases where wiper.sh should work when fstrim isn't? Is there any way I can check if the TRIMing actually has succeeded (other than trusting the wiper.sh-log)?

  Read the article

• Sending emails with Thunderbird + Postfix + Zarafa does not work

  - by Sven Jung

  I installed zarafa on my vserver and use as MTA postfix. The webaccess works fine, I can revceive and send emails, also receiving mails with thunderbird (IMAP ssl/tls) works. But there is a problem, sending emails with thunderbird. I established an account in thunderbird with imap ssl/tls connection which works finde, and a starttls smtp connection on port 25 for the outgoing mail server. If I try to send an email with thunderbird I get an error: 5.7.1 Relay access denied this is my mail.log Sep 7 16:10:07 postfix/smtpd[6153]: connect from p4FE06C0A.dip.t-dialin.net[79.224.110.10] Sep 7 16:10:08 postfix/smtpd[6153]: NOQUEUE: reject: RCPT from p4FE06C0A.dip.t-dialin.net[79.224.110.10]: 554 5.7.1 <[email protected]>: Relay access denie$ Sep 7 16:10:10 postfix/smtpd[6153]: disconnect from p4FE06C0A.dip.t-dialin.net[79.224.110.10] and this my /etc/postfix/main.conf # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache virtual_mailbox_domains = firstdomain.de, seconddomain.de virtual_mailbox_maps = hash:/etc/postfix/virtual virtual_alias_maps = hash:/etc/postfix/virtual virtual_transport = lmtp:127.0.0.1:2003 myhostname = mail.firstdomain.de alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = ipv4 I don't know what to do, because actually sending mails to internal and external addresses works with the webaccess. Perhaps somebody can help me?

  Read the article

• Using modem for sending voice recording

  - by ircmaxell

  I've got an interesting one for you. I've been going over my server monitoring and notification systems (Nagios based), and realized that if our internet connection goes down, there's no way for it to notify me. I already have a modem listening (Via CentOS 5) on a spare POTS line so that I can dial-in in case our internet goes down. I was wondering if I could come up with a script (Shell, Python, etc) that can dial out and play a recorded message (wave file I'm guessing) when it's picked up. I know Windows supports voice calls over a voice modem, I was wondering if a solution existed for Linux... I know asterisk can probably do it, but isn't that overkill (A full blown VOIP system just for a notification mechanism that will hopefully never be used)? And wouldn't it interfere with the modem's primary function as a backup network interface (PPP spawned via mgetty)? I've done some searching, and haven't really come up with much. I know how to dial out from the command line, but only as a modem (not as voice). Worst case, I could set it up to dial out as a modem, and then just realize that if I get a call with modem sounds from that number that it's the notification... Any insight would be appreciated...

  Read the article

• MGE UPS Cut power - What happened?

  - by JT.WK

  I have 3 x MGE Pulsar M 3000 2700w UPS units within my server room which have run perfectly up until now. On Saturday morning I noticed that one of these UPS units was no longer outputting power, the lcd displayed a message saying "load not powered" and told me to press the power button to start output. Needless to say that the servers, switches and routers is was supporting were all turned off. I tried pressing and even holding the power button, but the unit refused to start back up again. Only power cycling the unit got it back up again. I have checked the logs on the UPS, although they were useless. Nothing out of the ordinary, and no email notifications had been sent. The output level sits on about 51% and all battery checks are OK. It is now three days on and the UPS is still up and running (although I am scheduling an outage to get it out of there ASAP). Does anyone have any idea what could have gone wrong here? Is there anything else that I can check that could help?

  Read the article

• CloudFlare dashboards empty, or performance issues

  - by Katafalkas

  I wanted to test CloudFlare performance so I set my image gallery domain on it and started testing. I have added PageRules for caching. And chose the Security: Essentially Off. I checked NS check tools and they say that my domain name is propagated with CloudFlare. For testing purpose I created a link that loads 200 images from that server, and was using loads.in website to determine how much it is faster. After trying few regions, I noticed that there were no improvement in loading speed. So I looked up the dashboards, and it was empty. I am not sure if I am doing something wrong, or made some error in my setup, or it takes few days to start caching or working properly, but at the moment - after a day of testing - dashboards are empty. Also the NS check tools sais that all name servers are propagated to CloudFlare and working fine. So I assume I got a bad performance because it is simply not working. I sent a letter to CloudFlare support team, but did not get any straight answer. So essentially my question is: Anyone has any experience with CloudFlare ? How long does it take for it to start caching static content to CDN ? Or there is simply something I am doing wrong ?

  Read the article

• Reliable applicance for routing IT emergency calls (SIP and ISDN)

  - by chiborg

  We have a fairly big IT installation and our IT staff needs to be reachable 24/7. At the moment we have the following setup for "emergency" calls to our IT staff on our main Asterisk box: An incoming emergency number (connected via SIP trunk and a BRI card in case the SIP trunk goes down). When the number is called during the office hours, all the SIP phones of the IT staff are called simultaneously. When the number is called out of office hours interface, a list of mobile phone numbers is called, one after another until someone picks up. The list can be changed by the IT staff via command line script. The setup works well, but the Asterisk is heavily used in a call center, has experienced some outages and misconfigurations, each of them bringing down the IT emergency number. So we'd like to put the IT emergency call functionality on a separate device. This does not need to be a big server, it even does not need to be Asterisk, it only has one purpose and should do it reliably. It should be very low-maintenance. Any suggestions for hard- and software?

  Read the article

• eAccelerator Issue - Cache Directory Empty.

  - by Tom

  Hi all, Hoping someone can give me a hand with this. I've recently installated eAccelerator 0.9.6.1 - On a CentOS LAMP server. Had it working fine, using the /tmp/accelerator as the cache directory. php.ini set up: zend_extension="/usr/local/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so" eaccelerator.shm_size="200" eaccelerator.cache_dir="/var/cache/eaccelerator" eaccelerator.enable="1" eaccelerator.optimizer="1" eaccelerator.check_mtime="1" eaccelerator.debug="0" eaccelerator.filter="" eaccelerator.shm_max="0" eaccelerator.shm_ttl="3600" eaccelerator.shm_prune_period="180" eaccelerator.shm_only="1" eaccelerator.compress="1" eaccelerator.compress_level="9" php -v output: PHP 5.2.12 (cli) (built: Feb 3 2010 00:34:28) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies with eAccelerator v0.9.6.1, Copyright (c) 2004-2010 eAccelerator, by eAccelerator with the ionCube PHP Loader v3.3.20, Copyright (c) 2002-2010, by ionCube Ltd. I had to remove the cache directory as I was testing something. Remade it, re-set permissions and found that eAccelerator was no longer creating cache files within the folder. I thought it might be down to ownership rights on the folder so chown'd it apache.apache and this made no difference. I recreated the directory in /var/cache instead and editted php.ini to point to the new cache dir location, chmod'd, chown'd etc. and still eAccelerator is not creating any of the cache files in the directory (just empty). Could someone suggest what I might be doing incorrectly here. I've read through numerous pages to try and troubleshoot the issue to no avail. Any help appreciated.

  Read the article

• Tracking down source of duplicate email messages in Outlook / Exchange environment

  - by Ken Pespisa

  I have a few users, who are also Blackberry users, that occasionally have duplicate emails generated from their "mailbox". I put mailbox in quotes because I'm not exactly sure where the duplicates are created. One of these users is in non-cached mode, and the other is in cached mode, and both experience the problem. In fact, the non-cached mode user was originally experiencing the problem while in cached mode, and I made the switch a few weeks ago to attempt to solve the problem. Today I discovered the issue still exists. I'm not sure if the fact that they are blackberry users could be causing the problem at all. I don't see how, but felt I should mention it anyway. Does anyone have ideas on how I might begin to troubleshoot this? I can see in the non-cached user's mailbox "Sent Items" that the message was sent only once. I confirmed the message does not state that there was a conflict and in fact that makes sense because they are in non-cached mode. On the server, we have a mail journaling feature turned on for our third-party mail archiving system, and I can see that that system sees two sent messages. And likewise, the recipient does in fact have two messages in their inbox with consecutive message IDs ([email protected]) and ([email protected]). It would seem to me that the duplicates are generated on the client, but is there a way to tell for sure?

  Read the article

• Fixed and dynamic IPs in ISC DHPD lead to double lease

  - by GorillaPatch

  I would like to have a small dynamic adress part and the most clients are assigned a fixed IP adress. My dhcpd.conf looks like this: use-host-decl-names on; authoritative; allow client-updates; ddns-updates on; # Einstellungen fuer DHCP leases default-lease-time 3600; max-lease-time 86400; lease-file-name "/var/lib/dhcpd/dhcpd.leases"; subnet 192.168.11.0 netmask 255.255.255.0 { ddns-updates on; pool { # IP range which will be assigned statically range 192.168.11.1 192.168.11.240; deny all clients; } pool { # small dynamic range range 192.168.11.241 192.168.11.254; # used for temporary devices } } group { host pc1 { hardware ethernet xx:xx:xx:xx:xx:xx; fixed-address 192.168.11.11; } } The motivation for the pool declaration with deny all hosts comes from the ISC DHCPD homepage http://www.isc.org/files/auth.html This will allow hosts to be first added to the network, where they will receive a temporary IP from the 241-254 adress range and then later write an explicit host declaration. Upon next connect it will receive the right configuration. The problem is that I am getting error messages that 192.168.11.13 has a dynamic and a static lease. I am a bit confused as I expected the pool declaration with deny all clients would not count as dynamic. Dynamic and static leases present for 192.168.11.13. Remove host declaration pc1 or remove 192.168.11.13 from the dynamic address pool for 192.168.11.0/24 Is there a way to have the DHCP server send an DHCPNA to clients if they have a host statement and retain this dynamic range?

  Read the article

• Client certificate based encryption

  - by Timo Willemsen

  I have a question about security of a file on a webserver. I have a file on my webserver which is used by my webapplication. It's a bitcoin wallet. Essentially it's a file with a private key in it used to decrypt messages. Now, my webapplication uses the file, because it's used to recieve transactions made trough the bitcoin network. I was looking into ways to secure it. Obviously if someone has root access to the server, he can do the same as my application. However, I need to find a way to encrypt it. I was thinking of something like this, but I have no clue if this is actually going to work: Client logs in with some sort of client certificate. Webapplication creates a wallet file. Webapplication encrypts file with client certificate. If the application wants to access the file, it has to use the client certificate. So basically, if someone gets root access to the site, they cannot access the wallet. Is this possible and does anyone know about an implementation of this? Are there any problems with this? And how safe would this be?

  Read the article

• Orphan IBM JVM process

  - by Nicholas Key

  Hi people, I have this issue about orphan IBM JVM process being created in the process tree: For example: C:\Program Files\IBM\WebSphere\AppServer\bin>wsadmin -lang jython -f "C:\Hello.py" Hello.py has the simple implementation: import time i = 0 while (1): i = i + 1 print "Hello World " + str(i) time.sleep(3.0) My machine has such JVM information: C:\Program Files\WebSphere\java\bin>java -verbose:sizes -version -Xmca32K RAM class segment increment -Xmco128K ROM class segment increment -Xmns0K initial new space size -Xmnx0K maximum new space size -Xms4M initial memory size -Xmos4M initial old space size -Xmox1624995K maximum old space size -Xmx1624995K memory maximum -Xmr16K remembered set size -Xlp4K large page size available large page sizes: 4K 4M -Xmso256K operating system thread stack size -Xiss2K java thread stack initial size -Xssi16K java thread stack increment -Xss256K java thread stack maximum size java version "1.6.0" Java(TM) SE Runtime Environment (build pwi3260sr6ifix-20091015_01(SR6+152211+155930+156106)) IBM J9 VM (build 2.4, JRE 1.6.0 IBM J9 2.4 Windows Server 2003 x86-32 jvmwi3260sr6-20091001_43491 (JIT enabled, AOT enabled) J9VM - 20091001_043491 JIT - r9_20090902_1330ifx1 GC - 20090817_AA) JCL - 20091006_01 While the program is running, I tried to kill it and subsequently I found an orphan IBM JVM process in the process tree. Is there a way to fix this issue? Why is there an orphan process in the first place? Is there something wrong with my code? I really don't believe that my simplistic code is wrongly implemented. Any suggestions?

  Read the article

• PHP include() through HTTP makes Apache time out

  - by Adam Interact

  I have a problem with ExpressionEngine2 after moving from an old server to WHM/cPanel running on CentOS6.4. Simple test code to reproduce that issue: <?php $protocol = strpos(strtolower($_SERVER['SERVER_PROTOCOL']),'https') === FALSE ? 'http' : 'https'; $host = $_SERVER['HTTP_HOST']; include($protocol . '://' . $host . '/header.html'); ?> <p> Main text...</p> <?php include($protocol . '://' . $host . '/footer.html'); ?> Where header.html looks like <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Untitled Document</title> </head> <body> and footer.html looks like: </body> </html> Creates Apache time out: Warning: include(http://www.domain.com/header.html) [function.include]: failed to open stream: Connection timed out in /home/domain/public_html/test/index.php on line 5 Warning: include() [function.include]: Failed opening 'http://www.domain.com/header.html' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/domain/public_html/test/index.php on line 5 Main text... Warning: include(http://www.domain.com/footer.html) [function.include]: failed to open stream: Connection timed out in /home/domain/public_html/test/index.php on line 12 Warning: include() [function.include]: Failed opening 'http://www.domain.com/footer.html' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/domain/public_html/test/index.php on line 12 Any clue what can be wrong with Apache or PHP configuration? Thanks

  Read the article

• Virtual Fileserver

  - by Sergei

  Hi, We are planning to move our production servers to the datacenter and virtualize remaining servers in the process.Datacenter will have HP blades with vSphere on top.Currentliy we are using Celerra NS20 as fileserver.Since datacenter is using HP kit and EVA 4400 as SAN, we cannot have Celerra there, as EMC supoprt for Celerra does not work for non EMC array. I have searched for possible options and one of them was to have HP NAS blade X3800sb instead of Celerra.However this seems like overkill for me.We are only using Celerra for about 100 users and 50 servers and I think having X3800sb could be waste of resources. The other option would be to have a virtual fileserver as a part of vmware environment in datacenter.We only need CIFS to be provided.The only option I can think of is Windows Storage server.We had a bad expirience with Windows servers used as fileservers ( memory leaks one thing) in the past and this was one of the reasons we moved to Celerra. What are the other options?We need something as reliable as Celerra with as many options as possible.For example , Celerra has per folder quotas, deduplication, dynamic volume allocation, automatic failover, VTLU, replication. Also we would need to replicate NAS data to the failover site.We could use block level replication , SAN-to-SAN, but this would mean wasted bandwidth, as we need only subset of folders to be replicated.We used CA XSoft for windows servers in the past and Celerra has option for Celerra replication. Thank you very much in advance, Please ask me if I missed any details!

  Read the article

• Fully FOSS EMail solution

  - by Ravi

  I am looking at various FOSS options to build a robust EMail solution for a government funded university. Commercial options are to be chosen only in the worst case scenario. Here are the requirements: Approx 1000-1500 users - Postfix or Exim? (Sendmail is out;-)) Mailing lists for different groups/Need web based archive - Mailman? Sympa? Centralised identity store - OpenLDAP? Fedora 389DS? Secure IMAP only - no POP3 required - Courier? Dovecot? Cyrus?? Anti Spam - SpamAssasin? what else? Calendaring - ?? webmail - good to have, not mandatory - needs to be very secure...so squirrelmail is out;-)? Other questions: What mailbox storage format to use? where to store? database/file system? Simple and effective HA options? Is there a web proxy equivalent to squid in the mail server world? software load balancers?CARP? Monitoring and alert? Backup? The govt wants to stimulate the local economy by buying hardware locally from whitebox vendors. Also local consultants and university students will do the integration. We looked at out-of-the-box integrated solutions like Axigen, Zimbra and GMail but each was ruled out in favour of a DIY approach in the hopes of full control over the data and avoiding vendor lockin - which i though was a smart thing to do. I wish more provincial governments in the developing world think of these sort of initiatives As for OS - Debian, FreeBSD would be first preference. Commercial OS's need not apply. CentOS as second tier option...

  Read the article

• Make case-sensitive SMB share case-insensitive

  - by fungs

  I am running a legacy XP app that I would like to move on a network share. It is very simple and works in theory but the server providing the share is based on Linux (cannot configure) and the software does not work correctly because it is programmed case-insensitively, it seems. After some research, network shares behave like the filesystem they use underneath. This is normal. Unfortunately I cannot fix the software myself. Is there any way to turn the case-sensitivity into case-insensitivity for a Windows network drive on the client side? I fould two approaches: First, something like icasefile (http://wnd.katei.fi/icasefile/) that wraps around the program and intercepts the file I/O. This is for UNIX only. Secondly, a proxy virtual file system (e. g. something using Dokan). Unfortunately I couldn't find any suitable fs, the only possibility would be to put a case-insensitive filesystem on an image file and put this on the share using for example lmdisk (http://www.ltr-data.se/opencode.html/#ImDisk). Do you have any better ideas?

  Read the article

< Previous Page | 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022  | Next Page >