Search Results

Search found 9934 results on 398 pages for 'socially aware enterprise'.

Page 202/398 | < Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >

• Getting Partial / No Redundancy on VM's created on latest datastore

  - by Germano

  Hi, First some background. I'm in the process of upgrading my ESX servers from 3.5 to vSphere 4 and so far I have setup the new vCenter Server. Before I start the upgrade of the ESX, I needed more storage so I created 3 datastores from available space on my Equallogic PS6000 which has been connected for a while so as far as connectivity, nothing has changed. but now here's my problem, I get a "Partial / No Redundancy" on any VM that I create in any of these new datastores. I can create VM's on any of the older datstores on LUN's from exactly the same Equallogic and it works fine, but not the new ones. Keep in mind that these new datastores are the only ones that were created under the new vCenter, so I believe it must have something to do with it. Is anyone aware of any issues about creating datastored using the new vCenter but on a 3.5 ESX host? ISCSI with QLogic QLE406x Thanks in advance for nay help. Germano

  Read the article

• Coldfusion deployment under Apache Tomcat with Virtual Hosts

  - by smalltiger85

  Hello, I'm looking for the proper way to share the Coldfusion engine for all my Virtual Hosts. This is how I have the virtual hosts configured on server.xml in the Tomcat conf: <Host name="localhost" appBase="webapps" unpackWARs="false" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> <Context path="" docBase="cfusion/" reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true"/> </Host> <Host name="mysite1" appBase="webapps" xmlValidation="false" xmlNamespaceAware="false"> <Context path="" docBase="/mnt/webroot/mysite1" /> </Host> This is not valid for me because I'm instantiating one Coldfusion process for every virtual host, and it requires me to copy the WEB-INF folder in every site. My question is, is there any way to share the same Coldfusion instance for every virtual host, mantaining the sites webroot outside of the cfusion folder? I'm using Apache Tomcat 6 and Coldfusion Enterprise edition 8. Many thanks.

  Read the article

• DrayTek Vigor 2920(n): VPN with VLAN restrictions?

  - by Dirk

  Hi, I'm currently installing a DrayTek Vigor 2920n router in a new office. This router is to be used for 2 seperate companies. For one of these companies, the router has a LAN-2-LAN (VPN) connection to a datacenter configured. The other company should not be able to access this other (VPN-)network. I'm aware of the capability of this router to have VLAN's, but I cannot figure out how to configure the VPN-connection to only be accessible for VLAN0 and not for VLAN1. I know I can also add another router to physically split both networks, but we bought the DrayTek with the idea that it could easily have the VPN-connection available for VLAN0 and not for VLAN1. VLAN1 can easily be in another subnet, that's fine, although, I don't know how to configure that on this DrayTek. Can anyone point me in the right direction? Thanks in advance, Dirk

  Read the article

• Terse, documented, correct way to create Kerberos-backed user shares in Greyhole

  - by MrGomez

  As a migration strategy away from Windows Home Server (which is currently out of support and intractable for our needs, for a variety of reasons), our little cloister of nerds has targeted Greyhole for our shared use at home. Despite the documentation's terseness, getting the system set up for simple, single-user operation isn't especially difficult, but this scenario fails to service our needs. Among other highlights of the system, we're attempting to emulate Integrated Windows Authentication (with Kerberos) and single-user shares to keep the Windows users in the house happy and well-supported. I'm aware of the underlying systems that go into Greyhole and understand how to set up per-user shares in Samba, but the documentation doesn't seem to support cases for Greyhole to sop up these directories as separate landing zones for replication. Enter my question: are both of these cases (IWA user authentication and user-partitioned personal shares) supported by Greyhole? If so, please cite or link the supporting documentation if it exists.

  Read the article

• Running "Rebuild Index" maintenance plan with "Online indexing"

  - by Bharanidharan

  Hi I am using Windows Server 2003 SP 2 and SQL Server 2005 Enterprise edition I am creating a "Rebuild Index" job for a particular database and I am successfully able to run the job. But when I try to enable the "Keep index online while rebuilding" option, the job does not execute successfully and throws out errors. I have attached the screenshots. Any help would be app http://img535.imageshack.us/gal.php?g=error1r.png PS: I am not able to attach the images here since i do not have 10 points yet! Thanks.

  Read the article

• DOMPDF generation error

  - by VDVLeon

  Hello, I have a big problem at my work. We had to make a page who displays a exercise for the users. But that page need also to be available as pdf. To do this we used DOMPDF. This worked perfectly on your development server but when we moved it to the production server dompdf generates pdf with errors. When i open the pdf i get the error from Adobe Reader: 110. The first server (development) was Debian. The production server runs CentOS 5. DOMPDF used PDFLib or CPDF, but both generate the same error. Does anybody know what kind of differents on the server i need to be aware of ?

  Read the article

• Can't uninstall SBS 2003 in sbs 2003 -> sbs 2008 migration

  - by ChrisMuench

  I'm trying to remove sbs from my sbs 2003 server. Also I'm logged in as Administrator. However When I start to go through the wizard it gives me the following error. You must be a member of the Domain Admins, Schema Admins, and Enterprise Admins group. I then did some research and found this (http://support.microsoft.com/kb/842694) and I came to the point where it says to delete the server from Sites and Services. However when I clicked delete it wanted me to dcpromo the box first. However I have read you have to uninstall exchange first and then dcpromo it to remove AD. Any ideas?

  Read the article

• Adding entries to the context menu and organising them in Windows 7

  - by Ultra

  So I've got the hang of adding keys to HKEY_CLASSES_ROOT\Directory\Background\Shell, and I know I can add a string entitled 'Position' and change its value to position the entry I've made, but I can't figure out how to do three things (nor can I find anything guiding me in doing them): 1) How to put a bar on either side of an entry to separate it from other entries 2) How to position them in an exact place in the context menu (eg. above or below a certain other entry) 3) How to make an entry that brings up another list of entries (like the 'View' and 'Sort by' entries that are already there when you right-click in Windows Explorer I wasn't sure whether this goes in StackOverflow or SuperUser, but I thought maybe it goes here since I'm using Regedit rather than coding it (though I am aware you can right a .reg file and then execute it to install these sorts of things). Thanks!

  Read the article

• DRS: Unknown JNLP Location

  - by Joe

  We are using Deployment Rule Sets to limit access to the older JRE to well-known applications like - but are running into a problem. One business critical applications has the following properties (*s to protect info): title: Enterprise Services Repository location: null jar location: http://app.*.com:52400/rep/repository/*.jar jar version: null isArtifact: true The application downloads a .jnlp file, and uses java web start to execute. Since the location is null, this application cannot be targeted by a location rule. And the certificate hash method only works when the application is cached (being ran more than once). If cache storing is off, which is the case in some situations, how can this application be targeted? Or at least told to run with an older JRE on start? This problem is specifically noted in this bug Thanks!

  Read the article

• SFTP is not connecting to remote server

  - by Crono15

  $ sftp -vvv Remote_IP Connecting to Remote_IP... OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to Remote_IP [Remote_IP] port 22. debug1: connect to address Remote_IP port 22: Operation timed out ssh: connect to host Remote_IP port 22: Operation timed out Connection closed I set up an account for SFTP only access with a chroot. I tested that on the server and it works fine. The problem is, I could not get remote SFTP access to the server to work right. The example above is what I keep on running into. I have been trying to figure out how to solve this problem for 2 days now. I am not sure if it have to do with /etc/ssh/sshd_config. Is it something that I am not aware of? I am hoping that you could help point me to the right place for this issue.

  Read the article

• How to transfer files and settings from Windows 7 x64 to Windows 2008 R2?

  - by Mohamed Meligy

  If I want to re-install Windows 7 Enterprise 64 bit (or any other edition of Windows 7), I'd typically use "Windows Easy Transfer" utility built in the OS to backup and restore my files and settings. But in my case, I'm migrating to Windows Server 2008 R2. If I remember well -having worked on both Windows 2008/2008R2 before- "Windows Easy Transfer" is NOT installed on Windows server, and it doesn't even understand the format of the backup file it generates (".MIG" file). I can't remember for sure whether this is true, is it? And if it's true, what is the alternative for transferring the files and more importantly program settings to Windows 2008 R2? Of course I'm aware of the "manual" option and that automatic transfer sure will not transfer everything. Options??

  Read the article

• How to get top command output to show rake arguments?

  - by wbharding

  In the past, all of our servers have automatically shown command arguments passed to rake when we view them in top. For example: But on this particular server, we get this instead (picture is top running, showing the rake command, but not showing any of the arguments that had been passed to rake): Both servers are running Ubuntu (though the server without rake commands is a newer flavor of ubuntu). Both run rake through ruby enterprise edition (as powered by rvm). Can't seem to find any documentation on how top chooses what to show in the "command" column, other than the obvious "more data/less data" toggle (all screenshots are shown with the extra data enabled. Anyone encountered anything similar to this?

  Read the article

• Are there any vendors making a Gigabit Fiber solution for laptops?

  - by romandas

  I'm trying to build a laptop system that can connect to just about any network you might come across in a large enterprise. I realize I can use a media converter to go from twisted pair to fiber but prefer to have a NIC instead of a converter. Is there a vendor out there that actually makes a gigabit ethernet fiber adapter for laptops? Edit: A year after I asked this question, apparently Allied Telesis came out with the AT-2872SX ExpressCard which has an SC connector for Gigabit Ethernet. See syneticon-dj's answer below.

  Read the article

• Booting large ISO through PXE

  - by Devator

  I currently have a FOG server (which works perfectly fine) and I'm trying to boot Windows 7 through it (with memdisk). But, since the ISO is rather large (more than 6 GB) it will try to put the ISO into memory and then boot however it crashes with the error message not enough memory to load specified image. The systems here don't have 6 GB of RAM so I need another way to boot it. I am aware of WDS and SCCM, however I want todo this with FOG. Is there any way to boot the ISO and install Windows through FOG?

  Read the article

• Windows 2003 SP1 terminal server printers Disappear after reboot - HP laserjet 4240

  - by Alex

  had working PCL6 laserjet 4240 driver. needed to downgrade to PCl5, tried but did not get clean install. tried again and it seemed to work (this is 2003 enterprise terminal server SP2) Have over 40 working laserjets (5, 4000, 4100 and 18 of the 4240) After normal nightly reboot the 18 4240 printers were 'gone'. Worked w/Microsoft who said bad HP driver issues - weird since they work on other terminal servers. downloaded latest version, etc. from HP site and can NOT get to work. As soon as I install, then do a Net Stop Spool and Net Start Spooler the printer is 'gone'. Current workaround is to use HP 4000 PCL5 drivers for all of these 4240 printers.

  Read the article

• What happens to modern-ui apps when they aren't in the foreground?

  - by Mark Allen

  If I start a modern-ui app and then switch to a different app or a normal program running on the desktop, what happens to the first app? I've heard something about the first app being suspended, but realized that I don't really know that for certain. I mean, could you write a SETI@Home (BOINC) app if you wanted to, or will apps that aren't in the foreground always be suspended? Can you change that? I could see changing that based on available resources, running from AC vs. battery, etc. This morning I heard about an iPad being recovered thanks to the "Find my iPad" app, and was wondering whether you could write such a thing as a modern-ui app and have it work without being the running foreground app. (I'm aware that you'd just write a Windows service or similar, that's not what I'm asking about.)

  Read the article

• How do I maximize and check my gigabit transfer rate?

  - by J Penguin

  I'm trying to maximize my LAN transfer speed. LAN cards and switch are all gigabit on a CAT 6 cable. Modes are set correctly to 1000 full duplex. CentOS server Testing with ftp from both windows and fedora, I'm only having the speed around 11MB/s. On windows I notice that the first few seconds of file transfer I'm actually getting around 25MB/s before it drops to 11MB/s Can anyone please recommend me what my next step should be to increase this performance? Are there any utilities I can use to test the file transfer speed without taking hard drive speed into consideration? The only thing I know is the MTU which I will have to wait until the office hour is over before I can play with it. If there are anything else I should be aware of, please please let me know. Thank you!

  Read the article

• Linux laptop encryption

  - by kaerast

  What are my options for encrypting the /home directories of my Ubuntu laptops? They are currently setup without any encryption and some have /home as a separate partition whilst others don't. Most of these laptops are single-user standalone laptops which are out on the road a lot. Is ecryptfs and the encrypted Private directory good enough or are there better, more secure, options? If somebody got hold of the laptop, how easy would it be for them to gain access to the encrypted files? Similar questions for encrypted lvm, truecrypt and any other solution I may not be aware of.

  Read the article

• Apache Passenger can't find gem

  - by purpletonic

  I'm running Ubuntu 10.04 and I've transferred over some sites built in Sinatra. I've set up Phusion passenger, but when I visit the sites I'm getting a Passenger LoadError claiming that passenger has 'no such file to load -- sinatra' yet when I run gem list or sudo gem list, I clearly see sinatra listed. Why can't passenger find this gem? My sudo gem env output looks like this RubyGems Environment: - RUBYGEMS VERSION: 1.3.5 - RUBY VERSION: 1.8.7 (2009-12-24 patchlevel 248) [x86_64-linux] - INSTALLATION DIRECTORY: /usr/local/lib/ruby/gems/1.8 - RUBY EXECUTABLE: /usr/local/bin/ruby - EXECUTABLE DIRECTORY: /usr/local/bin - RUBYGEMS PLATFORMS: - ruby - x86_64-linux - GEM PATHS: - /usr/local/lib/ruby/gems/1.8 - /root/.gem/ruby/1.8 - GEM CONFIGURATION: - :update_sources = true - :verbose = true - :benchmark = false - :backtrace = false - :bulk_threshold = 1000 - REMOTE SOURCES: - http://gems.rubyforge.org/ running 'sudo ruby -v' I see the following: ruby 1.8.7 (2009-12-24 patchlevel 248) [x86_64-linux], MBARI 0x6770, Ruby Enterprise Edition 2010.01 Is that correct, or should the two ruby versions match up correctly, displaying REE in both? Thanks in advance!

  Read the article

• security issue of Linux sudo command?

  - by George2

  Hello everyone, 1. I am using Red Hat Enterprise 5 Linux box. I find if a user is in /etc/sudoers file, then if the user run command with sudo, the user will run this command with root privilege (without knowing root password, the user runs sudo only need to input the user's own password in order to run a command with sudo). Is that correct understanding? 2. If yes, then is it a security hole? Since users other than root could run with root privilege? thanks in advance, George

  Read the article

• Why after deleting a 110+ GB collection, my /var/lib/mongodb directory still have same size?

  - by tunnuz

  I am having some troubles with MongoDB and space usage. In particular, I once used to have a large collection of about 600 million records totaling 110+ GB on disk. Recently I decided to drop it because the data was outdated, to do so I dropped the collection through rockmongo's web interface. Accordingly, rockmongo doesn't show me the collection anymore, however my disk usage hasn't changed at all. Is there any clean operation which I am not aware of, which must be run in order to synchronize the database with database files on disk? I have tried to perform a "repair" but the system complains that there's not enough space on disk ... that's because it is all used by MongoDB.

  Read the article

• SQL Server Snapshot Replication Subscriber (Editable or Read-Only)

  - by NateReid

  I need to create a copy of my SQL 2008 R2 Enterprise database and have it located on the same server as the original. I will be using this second copy of the database as the target of a mostly read-only website. I understand that if I create this copy of the database using snapshot replication that all data changes in the subscriber database will be overwriten in the event of the next replication. The web application will try to write to this database to record login attempts, etc and will fail if its source database is read-only. In my case I do not need to keep these auditing records and they can therefore be overwriten each time a new snapshot is applied. My question is whether SQL Server forces the subcriber database to be read-only and is there any way around this? Thank you, Nate

  Read the article

• Postfix configuration problem

  - by dhanya

  Can anyone help me by giving your postfix configuration file as a reference so that I can find my mistakes? I'm working on SUSE Linux Enterprise Server. My goal is to set up a mailserver in a campus network. Postfix shows it is running but no mail is sent to var/spool/mail I send mail using mail command at terminal. Here is my main.cf file, please help me finding a solution: readme_directory = /usr/share/doc/packages/postfix-doc/README_FILES inet_protocols = all biff = no mail_spool_directory = /var/mail canonical_maps = hash:/etc/postfix/canonical virtual_alias_maps = hash:/etc/postfix/virtual virtual_alias_domains = hash:/etc/postfix/virtual relocated_maps = hash:/etc/postfix/relocated transport_maps = hash:/etc/postfix/transport sender_canonical_maps = hash:/etc/postfix/sender_canonical masquerade_exceptions = root masquerade_classes = envelope_sender, header_sender, header_recipient myhostname = cmail.cetmail delay_warning_time = 1h message_strip_characters = \0 program_directory = /usr/lib/postfix inet_interfaces = all #inet_interfaces = 127.0.0.1 masquerade_domains = cetmail mydestination = cmail.cetmail, localhost.cetmail, cetmail defer_transports = mynetworks_style = subnet disable_dns_lookups = no relayhost = postfix mailbox_command = cyrus mailbox_transport = strict_8bitmime = no disable_mime_output_conversion = no smtpd_sender_restrictions = hash:/etc/postfix/access smtpd_client_restrictions = smtpd_helo_required = no smtpd_helo_restrictions = strict_rfc821_envelopes = no smtpd_recipient_restrictions = permit_mynetworks,reject_unauth_destination smtp_sasl_auth_enable = no smtpd_sasl_auth_enable = no smtpd_use_tls = no smtp_use_tls = no alias_maps = hash:/etc/aliases mailbox_size_limit = 0 message_size_limit = 10240000

  Read the article

• Can not input or print Chinese on PuTTY

  - by hetaoblog

  On Red Hat Enterprise Linux AS release 3, I've set my environment variable as below $ echo $LANG zh_CN.UTF-8 $ echo $LANGUAGE zh_CN.UTF-8 $ echo $SUPPORTED en_US.UTF-8:en_US:en:zh_CN.UTF-8 $ locale LANG=zh_CN.UTF-8 LC_CTYPE="zh_CN.UTF-8" LC_NUMERIC="zh_CN.UTF-8" LC_TIME="zh_CN.UTF-8" LC_COLLATE="zh_CN.UTF-8" LC_MONETARY="zh_CN.UTF-8" LC_MESSAGES="zh_CN.UTF-8" LC_PAPER="zh_CN.UTF-8" LC_NAME="zh_CN.UTF-8" LC_ADDRESS="zh_CN.UTF-8" LC_TELEPHONE="zh_CN.UTF-8" LC_MEASUREMENT="zh_CN.UTF-8" LC_IDENTIFICATION="zh_CN.UTF-8" LC_ALL=zh_CN.UTF-8 Meanwhile I've set PuTTY's transmission encoding as utf-8 and appearance-font setting to have a font as 'Fixedsys' which does support chinese. However, when I try to print a file with Chinese, it can not print it correctly $ cat 1.txt hello¦¦¦ $ and I can not input Chinese correctly on shell.

  Read the article

• Convert png sequence to x264 with ffmpeg

  - by Thucydides411

  I am trying to convert a series of pngs into an mp4 video. I am using ffmpeg, and want to encode the video with the x264 codec. Using the command ffmpeg -y -r 30 -b 1800k -i _tmp%04d.png -vcodec libx264 out.mp4 I get the following warning message Incompatible pixel format 'bgra' for codec 'libx264', auto-selecting format 'yuv420p' My understanding is that there is an alpha channel in the pngs, which the x264 encoder cannot handle. Is there a way to get around this problem? Is there, for example, a way to get the encoder to ignore the alpha channel (my pngs don't actually have any transparent elements)? I'm aware that I could batch convert the pngs beforehand to strip the alpha channel, but the sequence of images is produced by another program, and having to preprocess the images each time I make a video would be less than optimal. Edit: After stripping the alpha channel from each frame using the command convert in.png -background white -flatten +matte out.png ffmpeg gives the warning message Incompatible pixel format 'pal8' for codec 'libx264', auto-selecting format 'yuv420p' so still no dice.

  Read the article

< Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >