Search Results

Search found 8391 results on 336 pages for 'partial hash arguments'.

Page 203/336 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

• Errors/warnings passing int/char arrays by reference

  - by Ankur Banerjee

  I'm working on a program where I try to pass parameters by reference. I'm trying to pass a 2D int array and a 1D char array by reference. Function prototype: void foo (int* (&a)[2][2], char* (&b)[4]) Function call: foo (a, b); However, when I compile the code with -ansi and -Wall flags on gcc, I get the following errors: foo.c: At top level: error: expected ‘)’ before ‘&’ token error: expected ‘;’, ‘,’ or ‘)’ before ‘char’ foo.c: In function ‘main’: error: too many arguments to function ‘foo’ I've stripped out the rest of the code of my program and concentrated on the bits which throw up the errors. I've searched around on StackOverflow and tried out different ways to pass the parameters, but none of them seem to work. (I took this way of passing parameters from the discussion on StackOverflow here.) Could you please tell me where I'm going wrong?

  Read the article

• How to sanitize grape params

  - by Boti

  I want to mass update attributes of an entity. How can I sanitize properly the params which is coming from grape? This is my console log about the parameters: params.except(:route_info, :token, :id) => {"display_number"=>"7"} [18] pry(#<Grape::Endpoint>)> params.permit(:display_number) ArgumentError: wrong number of arguments (2 for 0..1) from /Users/boti/.rvm/gems/ruby-2.0.0-p353@thelocker/gems/hashie-2.0.5/lib/hashie/mash.rb:207:in `default' [19] pry(#<Grape::Endpoint>)> params.sanitize => nil

  Read the article

• Getting config element from ConfigurationElementCollection

  - by Martin

  I have (hopefully) setup ConfigurationElementCollection of my own design with emails as keys. Now what? Hard to find actually on the web. How do I: iterate through it? See if a specific element exists? get a specific element? ...given: YourConfigElement config = ConfigurationManager.GetSection("YourSectionName") as YourConfigElement ; Partial answer Does this work? no, sadly. foreach (X x in config.XCollection.AsQueryable()) ...

  Read the article

• ASP.net MVC 2.0 using the same form for adding and editing.

  - by Chevex

  I would like to use the same view for editing a blog post and adding a blog post. However, I'm having an issue with the ID. When adding a blog post, I have no need for an ID value to be posted. When model binding binds the form values to the BlogPost object in the controller, it will auto-generate the ID in entity framework entity. When I am editing a blog post I DO need a hidden form field to store the ID in so that it accompanies the next form post. Here is the view I have right now. <% using (Html.BeginForm("CommitEditBlogPost", "Admin")) { %> <% if (Model != null) { %> <%: Html.HiddenFor(x => x.Id)%> <% } %> Title:<br /> <%: Html.TextBoxFor(x => x.Title, new { Style = "Width: 90%;" })%> <br /> <br /> Summary:<br /> <%: Html.TextAreaFor(x => x.Summary, new { Style = "Width: 90%; Height: 50px;" }) %> <br /> <br /> Body:<br /> <%: Html.TextAreaFor(x => x.Body, new { Style = "Height: 250px; Width: 90%;" })%> <br /> <br /> <input type="submit" value="Submit" /> <% } %> Right now checking if the model is coming in NULL is a great way to know if I'm editing a blog post or adding one, because when I'm adding one it will be null as it hasn't been created yet. The problem comes in when there is an error and the entity is invalid. When the controller renders the form after an invalid model the Model != null evaluates to false, even though we are editing a post and there is clearly a model. If I render the hidden input field for ID when adding a post, I get an error stating that the ID can't be null. Any help is appreciated. EDIT: I went with OJ's answer for this question, however I discovered something that made me feel silly and I wanted to share it just in case anyone was having a similar issue. The page the adds/edits blogs does not even need a hidden field for id, ever. The reason is because when I go to add a blog I do a GET to this relative URL BlogProject/Admin/AddBlogPost This URL does not contain an ID and the action method just renders the page. The page does a POST to the same URL when adding the blog post. The incoming BlogPost entity has a null Id and is generated by EF during save changes. The same thing happens when I edit blog posts. The URL is BlogProject/Admin/EditBlogPost/{Id} This URL contains the id of the blog post and since the page is posting back to the exact same URL the id goes with the POST to the action method that executes the edit. The only problem I encountered with this is that the action methods cannot have identical signatures. [HttpGet] public ViewResult EditBlogPost(int Id) { } [HttpPost] public ViewResult EditBlogPost(int Id) { } The compiler will yell at you if you try to use these two methods above. It is far too convenient that the Id will be posted back when doing a Html.BeginForm() with no arguments for action or controller. So rather than change the name of the POST method I just modified the arguments to include a FormCollection. Like this: [HttpPost] public ViewResult EditBlogPost(int Id, FormCollection formCollection) { // You can then use formCollection as the IValueProvider for UpdateModel() // and TryUpdateModel() if you wish. I mean, you might as well use the // argument since you're taking it. } The formCollection variable is filled via model binding with the same content that Request.Form would be by default. You don't have to use this collection for UpdateModel() or TryUpdateModel() but I did just so I didn't feel like that collection was pointless since it really was just to make the method signature different from its GET counterpart. Thanks for the help guys!

  Read the article

• Storing ASP.Net MVC Views in the Database

  - by Adam Albrecht

  For an ASP.Net MVC application, I'm interested in storing some views and/or partial views in the database so that a few semi-technical users can do some basic view logic. Does anyone have any tips or lessons from experience on doing this? I know Phil Haack wrote a blog post on this about a year ago. He used IronRuby for scripting his views, (which would be fine for me). He created a quick proof-of-concept, but I can't find any other information on the topic. Any ideas, thoughts, tips, etc would be appreciated. Thanks!

  Read the article

• out of memory issue in asp .net mvc application

  - by SARAVAN

  Hi, I have got one wierd issue. I am working on an asp .net mvc application. I have a refresh button that build some data and view models in the controller code, and returns the partial view back. Well this refresh does work good the very first time. But when i try to click my refresh button again, a javascript alert comes saying "out of memory at line 56" I checked my task manager to see on whats happening. I ahve a 3GB memory and when this error alert shows up the used memory is 1.41 GB. Its normal usage as it looks like. But I dont know why it shows the javascript error alert. This problem happens in my local workstation where I am doing developement of this application. Any thoughts or comments to trouble shoot or solve this issue is appreciated. I ma using IE7.

  Read the article

• How do I create a MessageBox in C# ?

  - by Nick Stinemates

  I have just installed C# for the first time, and at first glance it appears to be very similar to VB6. I decided to start off by trying to make a 'Hello, World!' UI Edition. I started in the Form Designer and made a button named "Click Me!" proceeded to double-click it and typed in MessageBox("Hello, World!"); I received the following error: MessageBox is a 'type' but used as a 'variable' Fair enough, it seems in C# MessageBox is an Object. I tried the following MessageBox a = new MessageBox("Hello, World!"); I received the following error: MessageBox does not contain a constructor that takes '1' arguments Now I am stumped. Please help.

  Read the article

• cant get my listbox to display objects

  - by Silvia Stoyanova

  Hello everyone I've been trying to put some objects in an ASP.NET list box but its just not working. I do have an overriden ToString method so I cant understand why this statement wont work. Here's the code that I use: for (int i = 0; i < fitnessClassList.Count(); i++) { lbDisplayItems.Items.Add(fitnessClassList.getFitnessClass(i)); } And the errors that I get: Error 2 Argument 1: cannot convert from 'FitnessClassManager.FitnessClassOpportunity' to 'System.Web.UI.WebControls.ListItem' Error 1 The best overloaded method match for 'System.Web.UI.WebControls.ListItemCollection.Add(System.Web.UI.WebControls.ListItem)' has some invalid arguments

  Read the article

• SQL Split function.

  - by Wardy

  Hi guys, I'm looking for a way to do this ... SELECT FirstName, LastName, Split(AddressBlock, ' ', 1), Split(AddressBlock, ' ', 2), PostCode FROM Contacts The arguments I want to pass are ... The address The separator (current situation requires 2 spaces but this might be a comma or a space followed by a comma) or something else (it varies). The address part I want to return (i don't always need all parts of the split result). I seem to be able to find a few examples of splitting functions about the internet but they return a table containing the entire set of split parts. My SQL skills aren't that great so I need the answer to be ultra simple. I'm always working with nvarchar data and the function needs to be reusable.

  Read the article

• What's the best general programming book to review basic development concepts?

  - by Charles S.

  I'm looking for for a programming book that reviews basic concepts like implementing linked lists, stacks, queues, hash tables, tree traversals, search algorithms, etc. etc. Basically, I'm looking for a review of everything I learned in college but have forgotten. I prefer something written in the last few years that includes at least a decent amount of code in object-oriented languages. This is to study for job interview questions but I already have the "solving interview questions" books. I'm looking for something with a little more depth and explanation. Any good recommendations?

  Read the article

• Problem in SQL Server 2005 using ASP.Net

  - by megala

  I created one ASP.Net project using SQLServer database as back end.I shows the foollwing error .How to solve this? ===============Coding Imports System.Data.SqlClient Partial Class Default2 Inherits System.Web.UI.Page Dim myConnection As SqlConnection Dim myCommand As SqlCommand Dim ra As Integer Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click myConnection = New SqlConnection("Data Source=JANANI-FF079747\SQLEXPRESS;Initial Catalog=new;Persist Security Info=True;User ID=sa;Password=janani") 'server=localhost;uid=sa;pwd=;database=pubs") myConnection.Open() myCommand = New SqlCommand("Insert into table3 values 'janani','jan'") ra = myCommand.ExecuteNonQuery() ========---> error is showing here MsgBox("New Row Inserted" & ra) myConnection.Close() End Sub End Class =========Error Message============ ExecuteNonQuery: Connection property has not been initialized.

  Read the article

• Perl XML::Simple XMLout function

  - by Jeremey

  I pass in the following XML to XMLin: <root foo="bar" foo2="bar2"> <pizzas> <pizza>Pepperoni</pizza> </pizzas> </root> I then edit part of the root element via hash array. I don't care about the pizza, but i do need that XML to come back out exactly as it was. However, I get the following from XMLout: <root foo="bar" foo2="bar2"> <pizzas pizza="Pepperoni"</pizzas> </root> Thoughts?

  Read the article

• Is there any simple way to test two PNGs for equality?

  - by Mason Wheeler

  I've got a bunch of PNG images, and I'm looking for a way to identify duplicates. By duplicates I mean, specifically, two PNG files whose uncompressed image data are identical, not necessarily whose files are identical. This means I can't do something simple like compare CRC hash values. I figure this can actually be done reliably since PNGs use lossless compression, but I'm worried about speed. I know I can winnow things down a little by testing for equal dimensions first, but when it comes time to actually compare the images against each other, is there any way to do it reasonably efficiently? (ie. faster than the "double-for-loop checking pixel values against each other" brute-force method?)

  Read the article

• Embedding Youtube Videos on user's wall with the Javascript API

  - by dragonmantank

  I'm attempting to embed a Youtube video on a user's wall using the Javascript API. I've poured over a bunch of different tutorials and came up with this: var data = { method: 'feed', link: current_video_url, // Link to the vide on our site source: current_video_src, // Link to the Youtube video, http://youtube.com/v/[hash] picture: current_picture_url, // Thumbnail from youtube title: current_video_title, // Title from our page caption: current_video_description // Text from our page } FB.ui(data); Running the Facebook Debugger shows that the current_video_url link is being properly parsed for OG tags and is available as an embedded video. I ran a debugger and all the variables are being properly set in the data variable. This worked fine for about 2 days, and then we pushed the site live. We set up a new AppID in Facebook but now all the videos are just thumbnails instead of being embedded in the user's wall. I thought maybe this is a problem with the live site but now the dev site is broken too. What's the best way to get this to work consistently?

  Read the article

• problem in loading class from 'me.prettyprint.hector.api.Serializer'

  - by dhananjay patil

  I have created executable jar but having some problem with Class not found Exception. When I type command: java -jar JarFileName.jar arguments.. I get error message, Exception in thread "main" java.lang.NoClassDefFoundError: me/prettyprint/hector/api/Serializer at com.ensarm.niidle.web.scraper.NiidleScrapeManager.main(NiidleScrapeManager.java:21) Caused by: java.lang.ClassNotFoundException: me.prettyprint.hector.api.Serializer at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:252) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) ... 1 more please tell me solution for this,class is not getting loaded from the external jar

  Read the article

• nHibernate HQL dynamic Instantiation question

  - by Rey

  Hello all, I can't find what's going on with the following nHibernate HQL. here's my VB.Net code: Return _Session.GetNamedQuery("PersonAnthroSummary").SetInt32(0, 2).UniqueResult() My Named Query: <sql-query name="PersonAnthroSummary"> select New PersonAnthroSummary( Anthro.Height, Anthro.Weight ) from PersonAnthroContact as Anthro where Anthro.ID = ? </sql-query> and i am importing the DTO class: <import class="xxxxxxx.DataServices.PersonAnthroSummary, xxxxxxxxx.DataServices"/> PersonAnthroSummary has a constructor that will take height and weight arguments. when i test this, nHibernate throwing following exception: {"Incorrect syntax near 'Anthro'."} and generated QueryString is: "select New PersonAnthroSummary( Anthro.Height, Anthro.Weight ) from PersonAnthroContact as Anthro where Anthro.ID = @p0" Can some one tell me what i'm doing wrong here?

  Read the article

• Can I encrypt value in C# and use that with SQL Server 2005 symmetric encryption?

  - by Robert Byrne

  To be more specific, if I create a symmetric key with a specific KEY_SOURCE and ALGORITHM (as described here), is there any way that I can set up the same key and algorithm in C# so that I can encrypt data in code, but have that data decrypted by the symmetric key in Sql Server? From the research I've done so far, it seems that the IDENTITY_VALUE for the key is also baked into the cypher text, making things even more complex. I'm thinking about just trying all the various ways I can think of, ie hashing the KEY_SOURCE using different hash algorithms for a key and trying different ways of encrypting the plain text until I get something that works. Or is that just futile? Has anyone else done this, any pointers? UPDATE Just to clarify, I want to use NHibernate on the client side, but theres a bunch of stored procedures on the database side that still perform decryption.

  Read the article

• mdadm: Win7-install created a boot partition on one of my RAID6 drives. How to rebuild?

  - by EXIT_FAILURE

  My problem happened when I attempted to install Windows 7 on it's own SSD. The Linux OS I used which has knowledge of the software RAID system is on a SSD that I disconnected prior to the install. This was so that windows (or I) wouldn't inadvertently mess it up. However, and in retrospect, foolishly, I left the RAID disks connected, thinking that windows wouldn't be so ridiculous as to mess with a HDD that it sees as just unallocated space. Boy was I wrong! After copying over the installation files to the SSD (as expected and desired), it also created an ntfs partition on one of the RAID disks. Both unexpected and totally undesired! . I changed out the SSDs again, and booted up in linux. mdadm didn't seem to have any problem assembling the array as before, but if I tried to mount the array, I got the error message: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so dmesg: EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! EXT4-fs (md0): group descriptors corrupted! I then used qparted to delete the newly created ntfs partition on /dev/sdd so that it matched the other three /dev/sd{b,c,e}, and requested a resync of my array with echo repair > /sys/block/md0/md/sync_action This took around 4 hours, and upon completion, dmesg reports: md: md0: requested-resync done. A bit brief after a 4-hour task, though I'm unsure as to where other log files exist (I also seem to have messed up my sendmail configuration). In any case: No change reported according to mdadm, everything checks out. mdadm -D /dev/md0 still reports: Version : 1.2 Creation Time : Wed May 23 22:18:45 2012 Raid Level : raid6 Array Size : 3907026848 (3726.03 GiB 4000.80 GB) Used Dev Size : 1953513424 (1863.02 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon May 26 12:41:58 2014 State : clean Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 4K Name : okamilinkun:0 UUID : 0c97ebf3:098864d8:126f44e3:e4337102 Events : 423 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 2 8 48 2 active sync /dev/sdd 3 8 64 3 active sync /dev/sde Trying to mount it still reports: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so and dmesg: EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! EXT4-fs (md0): group descriptors corrupted! I'm a bit unsure where to proceed from here, and trying stuff "to see if it works" is a bit too risky for me. This is what I suggest I should attempt to do: Tell mdadm that /dev/sdd (the one that windows wrote into) isn't reliable anymore, pretend it is newly re-introduced to the array, and reconstruct its content based on the other three drives. I also could be totally wrong in my assumptions, that the creation of the ntfs partition on /dev/sdd and subsequent deletion has changed something that cannot be fixed this way. My question: Help, what should I do? If I should do what I suggested , how do I do that? From reading documentation, etc, I would think maybe: mdadm --manage /dev/md0 --set-faulty /dev/sdd mdadm --manage /dev/md0 --remove /dev/sdd mdadm --manage /dev/md0 --re-add /dev/sdd However, the documentation examples suggest /dev/sdd1, which seems strange to me, as there is no partition there as far as linux is concerned, just unallocated space. Maybe these commands won't work without. Maybe it makes sense to mirror the partition table of one of the other raid devices that weren't touched, before --re-add. Something like: sfdisk -d /dev/sdb | sfdisk /dev/sdd Bonus question: Why would the Windows 7 installation do something so st...potentially dangerous? Update I went ahead and marked /dev/sdd as faulty, and removed it (not physically) from the array: # mdadm --manage /dev/md0 --set-faulty /dev/sdd # mdadm --manage /dev/md0 --remove /dev/sdd However, attempting to --re-add was disallowed: # mdadm --manage /dev/md0 --re-add /dev/sdd mdadm: --re-add for /dev/sdd to /dev/md0 is not possible --add, was fine. # mdadm --manage /dev/md0 --add /dev/sdd mdadm -D /dev/md0 now reports the state as clean, degraded, recovering, and /dev/sdd as spare rebuilding. /proc/mdstat shows the recovery progress: md0 : active raid6 sdd[4] sdc[1] sde[3] sdb[0] 3907026848 blocks super 1.2 level 6, 4k chunk, algorithm 2 [4/3] [UU_U] [>....................] recovery = 2.1% (42887780/1953513424) finish=348.7min speed=91297K/sec nmon also shows expected output: ¦sdb 0% 87.3 0.0| > |¦ ¦sdc 71% 109.1 0.0|RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR > |¦ ¦sdd 40% 0.0 87.3|WWWWWWWWWWWWWWWWWWWW > |¦ ¦sde 0% 87.3 0.0|> || It looks good so far. Crossing my fingers for another five+ hours :) Update 2 The recovery of /dev/sdd finished, with dmesg output: [44972.599552] md: md0: recovery done. [44972.682811] RAID conf printout: [44972.682815] --- level:6 rd:4 wd:4 [44972.682817] disk 0, o:1, dev:sdb [44972.682819] disk 1, o:1, dev:sdc [44972.682820] disk 2, o:1, dev:sdd [44972.682821] disk 3, o:1, dev:sde Attempting mount /dev/md0 reports: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so And on dmesg: [44984.159908] EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! [44984.159912] EXT4-fs (md0): group descriptors corrupted! I'm not sure what do do now. Suggestions? Output of dumpe2fs /dev/md0: dumpe2fs 1.42.8 (20-Jun-2013) Filesystem volume name: Atlas Last mounted on: /mnt/atlas Filesystem UUID: e7bfb6a4-c907-4aa0-9b55-9528817bfd70 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: user_xattr acl Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 244195328 Block count: 976756712 Reserved block count: 48837835 Free blocks: 92000180 Free inodes: 243414877 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 791 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 RAID stripe width: 2 Flex block group size: 16 Filesystem created: Thu May 24 07:22:41 2012 Last mount time: Sun May 25 23:44:38 2014 Last write time: Sun May 25 23:46:42 2014 Mount count: 341 Maximum mount count: -1 Last checked: Thu May 24 07:22:41 2012 Check interval: 0 (<none>) Lifetime writes: 4357 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: e177a374-0b90-4eaa-b78f-d734aae13051 Journal backup: inode blocks dumpe2fs: Corrupt extent header while reading journal super block

  Read the article

• Asp.net Mvc configurable Html.ActionLink controller/method

  - by Andrew Florko

  Hello everybody, I have ascx partial view with html-layout like that <%=Html.ActionLink<PersonController>(x => x.Publications(param1, param2, ... )) %> My ascx is pretty big & I'd like to reuse it, changing controller/method in Html.ActionLink with another controller/method. Method of another controller has the same signature as PersonController.Publications. Please, suggest me the best way how to make controller/method configurable for my layout. Thank you in advance

  Read the article

• How can I resume downloads in Perl?

  - by Neeraj

  I have a project that depends upon some other binaries to be downloaded from web at install time.For this what i do is: if ( file-present-in-src/) # skip that file else # use wget to download the file The problem with this approach is that when I interrupt a download in middle, and do invoke the script next time, the partially downloaded file is also skipped (which is not desired), also I want wget to resume the download of the partially downloaded file. How should I go about it: Possible Solutions I could think of: Let the file to be downloaded to some file say download_tmp. Move to original file if successful. Handle SIG{'INT'} to write proper cleanup code. But none of these could help resume the partial file download, Any insights?

  Read the article

• Git pre-receive hook

  - by Ralphz

  Hi When you enable pre-receive hook for git repository: It takes no arguments, but for each ref to be updated it receives on standard input a line of the format: < old-value SP < new-value SP < ref-name LF where < old-value is the old object name stored in the ref, < new-value is the new object name to be stored in the ref and is the full name of the ref. When creating a new ref, < old-value is 40 0. Does anyone can explain me how do I examine all the files that will be changed in the repository if i allow this commit? I'd like to run that files through some scripts to check syntax and so on. Thanks.

  Read the article

• Rails 3.1. Cocoon link_to_add_association example needed

  - by BazZy

  pls show any example of using Cocoon's 'link_to_add_association' with html_options. https://github.com/nathanvda/cocoon Documentation says: html_options: extra html-options (see link_to) There are two extra options that allow to conrol the placement of the new link-data: data-association-insertion-node : the jquery selector of the node data-association-insertion-position : insert the new data before or after the given node. But i can not understand what to do, if i want insert partial just before my "add element" link. Not just after parent's div begin. This not gonna work: <%= link_to_add_association "add element", f, :production_years, :position = "after_all" %

  Read the article

• How do i call bash script function using exec function by passing parameter in php?

  - by Stan

  I have created a bash script that install magento in a cpanel. but i have a problem regarding the exec function. $function_path = Mage::getBaseDir()."/media/installer/function.sh"; exec("$function_path $db_host $db_name $db_user $db_pass $url $ad_user $ad_pass $ad_email"); This the bash shell script function.sh #!/bin/bash magento_detail $dbhost $dbname $dbuser $dbpass $url $admin_username $admin_password $admin_email function magento_detail() { stty erase '^?' echo "To install Magento, you will need a blank database ready with a user assigned to it." echo -n "Do you have all of your database information" dbinfo = "y" echo $dbinfo if [ "$dbinfo" -eq 'y' ] then echo "Database Host (usually localhost) : $dbhost " echo "Database Name : $dbname " echo "Database User : $dbuser " echo "Database Password : $dbpass " echo "Store Url : $url " echo "Admin Username : $admin_username " echo "Admin Password : $admin_password " echo "Admin Email Address : $admin_email " echo -n "Include Sample Data? (y/n) " echo sample = "y" if [ "$sample" -eq "y" ]; then echo echo "Now installing Magento with sample data..." echo echo "Downloading packages..." echo wget http://www.magentocommerce.com/downloads/assets/1.5.1.0/magento-1.5.1.0.tar.gz wget http://www.magentocommerce.com/downloads/assets/1.2.0/magento-sample-data-1.2.0.tar.gz echo echo "Extracting data..." echo tar -zxvf magento-1.5.1.0.tar.gz tar -zxvf magento-sample-data-1.2.0.tar.gz echo echo "Moving files..." echo mv magento-sample-data-1.2.0/media/* magento/media/ mv magento-sample-data-1.2.0/magento_sample_data_for_1.2.0.sql magento/data.sql mv magento/index.php magento/.htaccess ./$test1 echo echo "Setting permissions..." echo chmod o+w var var/.htaccess app/etc chmod -R o+w media echo echo "Importing sample products..." echo mysql -h $dbhost -u $dbuser -p$dbpass $dbname < data.sql echo echo "Initializing PEAR registry..." echo chmod 550 mage ./mage mage-setup . echo echo "Downloading packages..." echo echo echo "Cleaning up files..." echo rm -rf downloader/pearlib/cache/* downloader/pearlib/download/* rm -rf magento/ magento-sample-data-1.2.0/ rm -rf magento-1.5.1.0.tar.gz magento-sample-data-1.2.0.tar.gz data.sql rm -rf index.php.sample .htaccess.sample php.ini.sample LICENSE.txt STATUS.txt data.sql echo echo "Installing Magento..." echo php -f install.php --license_agreement_accepted "yes" --locale "en_US" --timezone "America/Los_Angeles" --default_currency "USD" --db_host "$dbhost" --db_name "$dbname" --db_user "$dbuser" --db_pass "$dbpass" --url "$url" --use_rewrites "yes" --use_secure "no" --secure_base_url "" --use_secure_admin "no" --admin_email "$admin_email" --admin_username "$admin_username" --admin_password "$admin_password" echo echo "Finished installing Magento" echo exit else echo "Now installing Magento without sample data..." echo echo "Downloading packages..." echo wget http://www.magentocommerce.com/downloads/assets/1.5.1.0/magento-1.5.1.0.tar.gz echo echo "Extracting data..." echo tar -zxvf magento-1.5.1.0.tar.gz echo echo "Moving files..." echo mv magento/* magento/.htaccess . echo echo "Setting permissions..." echo chmod o+w var var/.htaccess app/etc chmod -R o+w media echo echo "Initializing PEAR registry..." echo chmod 550 mage ./mage mage-setup . echo echo "Downloading packages..." echo echo echo "Cleaning up files..." echo rm -rf downloader/pearlib/cache/* downloader/pearlib/download/* rm -rf magento/ magento-1.5.1.0.tar.gz rm -rf index.php.sample .htaccess.sample php.ini.sample LICENSE.txt STATUS.txt echo echo "Installing Magento..." echo php -f install.php --license_agreement_accepted "yes" --locale "en_US" --timezone "America/Los_Angeles" --default_currency "USD" --db_host "$dbhost" --db_name "$dbname" --db_user "$dbuser" --db_pass "$dbpass" --url "$url" --use_rewrites "yes" --use_secure "no" --secure_base_url "" --use_secure_admin "no" --admin_email "$admin_email" --admin_username "$admin_username" --admin_password "$admin_password" echo echo "Finished installing Magento else part" exit fi else echo "Please setup a database first. Don't forget to assign a database user!" exit fi }` when i run this exec command,at that time it calls bash script function magento_installer() which contains arguments $db_host $db_name $db_user $db_pass $url $ad_user $ad_pass $ad_email. above arguments i'll pass in exec command to call magento_installer() function of bash script. so, is it right way of calling a bash script function? It directly goes to the last step of if condition and prints "Please setup a database first. Don't forget to assign a database user!". It cant enter it in if condition and directly goes to else condition. so please help me?

  Read the article

• Server authorization with MD5 and SQL.

  - by Charles

  I currently have a SQL database of passwords stored in MD5. The server needs to generate a unique key, then sends to the client. In the client, it will use the key as a salt then hash together with the password and send back to the server. The only problem is that the the SQL DB has the passwords in MD5 already. Therefore for this to work, I would have to MD5 the password client side, then MD5 it again with the salt. Am I doing this wrong, because it doesn't seem like a proper solution. Any information is appreciated.

  Read the article

• using property file along with config file to be used with mxmlc

  - by whoopy_whale

  Hi, I'm trying to run mxmlc in the following manner. mxmlc -load-config+=mycfg.xml C:\\projects\\src\\main.mxml -output myswf.swf In the config file, I want to keep some values configurable, for example the paths of the external libraries. Is it possible to include a property file into the config file and use it as {property_name} in the config file? Or is it possible to pass certain arguments from the command line itself that will override/replace the corresponding values in the config file, like the -D option in the ant command? Please provide your suggestions.

  Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >