Search Results

Search found 7435 results on 298 pages for 'hardware'.

Page 204/298 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• BSOD / Reboot Cycling (possibly after windows update?)

  - by Mikey.B

  Windows XP SP3 Hi Guys, My desktop PC rebooted during the night (presumably due to an automated Windows update) and was stuck on a file system check. I forced a reboot as it had been stuck for hours and now the system won't finish booting. It shows the Windows XP splash screen, briefly flickers what looks to be a BSOD, and then reboots. So far, I've tried: Booting into all variations of safe mode (just hangs) Setting BIOS settings to fail-safe defaults (still reboots) Choosing the start-up option to load last known good configuration (still reboots) Any suggestions on how to proceed here? I haven't installed any recent software or hardware so I don't think this is a result of any explicit change I've made. -M

  Read the article

• Debian Based Server not booting, soon after GRUB screen it restarts?

  - by Krauser

  I have tried running memtest, it start get about half way then abruptly restarts. I assume this is not a problem with the OS itself but rather a hardware issue, I have checked various logs when after about 10 reboots it starts ok, /var/log/kern.log /var/log/syslog /var/log/dmesg All I get is: EXT4-fs(sdc1): re-mounted. Opts: errors=remount-ro restart So I ran fcsk on the drive, to check if the fs was failing and it was fine. Really don't know how to find why the server is continuosly restarting andif I get lucky it will boot up.

  Read the article

• Is there a fix for an iMac G5 annoying screen pattern issue?

  - by smountcastle

  It's probably a hardware issue, but I was hoping that someone might know of other options to try. My iMac G5 (the revision just before the built-in iSight was introduced) has developed an annoying pattern of short/wide rectangles in a pinkish hue across the screen. I've followed Apple's instructions to ensure that the logic board hasn't failed (by resetting the SMU and watching the internal LEDs light-up). I suspect either the LCD or video card has failed. Below are two screen shots, one taken by my iPhone which exhibits the problem and a snapshot taking from the faulty iMac which looks fine.

  Read the article

• Monitors blank after restart [closed]

  - by offler

  i need help on the following issue. We have Dell T1650 PCs with 2 nvidia graphic adapters / Windows 7 and 4 attached monitors. At initial start all screens are blank, the computer does not show anything. If powered off by pressing the hardware power button and then restarting all monitors show a picture. The Windows event log shows only the errors, that the machine was shut down unexpectly. The last entry with blank screen seems to be that user specific dlls for every application are loaded. How can I find out the real problem?

  Read the article

• Which particular file caused "Delayed write failed" error?

  - by user35020

  I sometimes get this error when resuming from hibernation: Delayed Write Failed: Windows was unable to save all the data for the file G:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. I know this is caused because the hard drive (G:, an external USB drive) was (a) plugged in when I hibernated and wasn't ready at wake-up, or (b) I simply forgot to plug it when resuming from hibernation. My question is: is there any way to see which particular file/folder/etc failed to be written? The hard drive functions correctly before and after, so there seems to be no permanent damage. Is there a detailed log someplace or a utility? I've searched but found nothing. Thanks for any help!

  Read the article

• A GFX card with two DVI and one HDMI with audio?

  - by TomaszRykala

  I haven't upgraded my PC for a while nor kept up to date with pc hardware since 2007, but have recently come up with a requirement and I am wondering if I can solve it! Are there any graphics cards out there that have two DVIs and one HDMI output, with the HDMI supporting sound over it? Basically, I've got a two PC monitor setup, and both monitors are connected to the two DVI's of my GTX9800+. I want to upgrade my card to say, GTX 460, but can't find if there is such with two DVIs (for my monitors) and one HDMI with audio (for my TV). So I am wondering, if such solution possible at all? I noticed that there are some cards out there with two DVI's and one mini-HDMI, but they all say 'HDMI Output Yes x 1 (via DVI to HDMI adaptor x 1 )', which probably means that because of the DVI element, the audio won't work. Is this true? Such card is an exmaple: http://uk.asus.com/Graphics_Cards/NVIDIA_Series/ENGTX460_DirectCU2DI1GD5/#specifications Many thanks for your help!

  Read the article

• Moving an "all-in-one" PC when turned on/off

  - by Purak

  I have an "all-in-one" pc. I know that moving a pc when it is switched on is harmful to the hardware components. What I would like to know is if the same applies to "all-in-one" pc's and if the same applies to regularly moving it from one side of the room to the other when it is turned off! The reason for the question is that I work on one desk during the day, and in the evening move it to the couch so I can do other stuff while watching TV or something. I always turn it off before the move, but somebody told me that I can be damaging the machine by doing so. Can anybody shed some light on this? Many thanks

  Read the article

• Event 4625 - Logon Failure - Server 2008 R2 is logging them all over the place ! How to stop the attack?

  - by user72593

  I've been monitoring failed logons to a server which is directly connected to the internet with no hardware firewall in the way...testing purposes only. Using the Server 2008 R2 firewall, I blocked access to just about everything except RDP, then I told the firewall to only allow connections to the RDP port from "MY" static IP. I tested from other locations and I am not able to login to the server unless i'm at my office. So how are people coming from Chinese IP's able to attempt logons and get logged as failures ?? Is there something i'm missing that needs to be blocked? Any help would be appreciated.

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by badnaam

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• RAID striping on a desktop machine

  - by Blazemore

  I currently have a 120Gib SSD which is pretty fast for things like game loading times and video editing. However, I was wondering about getting another identical drive and hooking it up with a striping RAID array in hardware (I boot multiple operating systems). This would have the dual benefits of providing a larger logical drive, while also providing greater performance. However, I have a few questions: What kind of performance increase can I expect to see with a pair of good quality SSDs? How expensive is a quality desktop RAID controller? Will the controller present the OS with a single logical drive? Does this mean I can still partition it and multi-boot? Basically, can I treat the RAID controller as "a hard drive" at the OS level?

  Read the article

• RAID 1 in ubuntu 12.04

  - by Bavly Hanna

  Right now I have a small file server to which I have loaded ubuntu 12.04 desktop on a small 160gb harddrive. This harddrive is the primary drive from which the OS boots. I want to move all my data to my file server so it can be shared on the network (contain in 2x2TB harddrives in my desktop. The 2TB drivers are in raid 1 (hardware). I simply want to move them to the file server and set it up so that they are in software raid 1. If at all possible I'd like to be able to do this without losing any info on the drives. I've searched around and the guides i find describe raiding drives for boot driver, but these wouldn't be boot drives just regular storage drives. If someone could tell me how to perform this or point me in the right direction it would be much appreciated.

  Read the article

• Why do I have to enter my password every time I activate / deactivate AirPort (WiFi) on my MacBook P

  - by Another Registered User

  I use Snow Leopard, and I'm used to activate / deactivate WiFi like 20 times per day. The reason is that WiFi stops working properly after a few minutes of use. So every time I try to surf, I must stop/reactivate it first. But now, suddenly I have to enter my user password every time I want to do it. It's so annoying! The dialogue details say: Right: com.apple.airport.power Program: SystemUIServer What can I do that the Mac won't ask me for the password every time? It's hard enough that I have to stop/reactivate WiFi all the time (hardware bug). I have a admin account with full rights.

  Read the article

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• What is a good topic for a research paper on modern computer architecture?

  - by Max Schmeling

  This may not be the right place for this, but I wanted to get this question in front of some of the brightest people on the internet, so I thought I'd give it a shot. I have to write a research paper on some modern aspect of computer architecture. The subject is really not very restrictive; pretty much any recent development in computer hardware will work. I want to write it over something really interesting, but I don't have a lot of good ideas. What would make a really interesting paper?

  Read the article

• "Undeleting" partition (NTFS) - recommendations?

  - by kagali-san

  So I have a drive which either suffered from hardware error or, possibly, got a little shock from badly configured Windows unattended install started on the same PC (the drive in question wasn't the install drive..). Quick exam shows that filesystem is seemingly intact, as some data recovery tools work with it (UnFormat rated it as "Excellent"). This may mean that a copy of partition table exists on disk, or a copy of MFT survived whatever happened, or.. Any idea how to restore partition tables/FS header, add a drive letter thus let Windows to mount the filesystem as if nothing happened? (I guess there must be tools of this kind)

  Read the article

• Debian - no sound output

  - by Gogeta70

  So I've been trying for the last few days to get sound output on my Linux desktop. The onboard audio is Intel HD Audio ICH9, but I couldn't get Alsa to even detect it, so I disabled it in BIOS and installed a PCI card - a Dynex DX-SC51. Searching around, I found that it needed the Alsa driver for ice1724, so I installed all the stuff for that. Now, the system detects my sound card, but I can't get any audio to play out of it. Here's some information: root@debian:~# lspci | grep audio 02:01.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01) root@debian:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ICE1724 [ICEnsemble ICE1724], device 0: ICE1724 [ICE1724] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: ICE1724 [ICEnsemble ICE1724], device 1: ICE1724 IEC958 [ICE1724 IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 I've been trying various solutions found on Google for a few days now and I'm getting nowhere. Hopefully someone here can point me in the right direction. Thanks.

  Read the article

• Help me diagnose Windows 7 pc issue

  - by lkm

  I have a dell pc running windows 7 with the intel i3 processor. Whenever I restart the computer, the os crawls. For example, I move the mouse and then I see it move on the screen 10 seconds later...everything runs slowly. This happens only on a restart (its fine when I turn it on after it has been shut down). Any ideas what is causing this (I haven't installed any new software since buying it). Does it sound like a hardware or software issue? Thanks

  Read the article

• Windows 7 won't recognize my second hard drive after reinstall

  - by Shadur

  I recently suffered a total hardware crash on my windows C: drive. Fortunately, I had a spare disk on hand and set about reinstalling. For some reason, during the install it decided to declare my second windows drive as the booting drive, but once the installation was completed it completely and utterly refuses to acknowledge the filesystem -- I'm not even seeing a drive letter, while it /does/ find the linux partitions on the other two drives (even if it can't read any of them). My first (and most important) question: How can I get windows to re-acknowledge the drive, preferably without losing all the data on it? My second question: How can I tell windows to set up its boot loader on the new C: drive?

  Read the article

• Missing Driver - Video Controller (VGA Compatible)

  - by arahant

  I have a HP 2000-2106TU Notebook PC running Windows XP. I want to get the brightness keys to work. They are placed over the F2 and F3 buttons and are meant to be used in conjunction with the Fn key. But these combinations do not work, though other Fn keys such as the volume control keys do. I see a missing driver for a device called Video Controller (VGA Compatible) in the Windows Device Manager. The hardware id is PCI VEN 8086 DEV 0106 SUBSYS_1858103C which a Google search suggests is in an Intel HD Graphics family, but I don't know where to locate the driver. HP's driver scan does not help, as it does not show any missing driver related to video/graphics. What can I do next?

  Read the article

• Ubuntu 9.10 Karmic, nVidea Quadro NVS 280 PCi, Eizo S1921 Dual Screen (Twin View) Slow Window Draws

  - by Spasm

  I have been following this Tutorial to get dual monitors working on my box http://www.dwasifar.com/?p=862&cpage=1#comment-5727 It works! However, when ever I move a window, the redraw of that window takes 3-8 seconds. Even moving the window takes the same amount of time Is this being done in software rather than the nVidea hardware? The windows themselves do not respond. I have seen a few old threads but no relevant fixes - If anyone could suggest a fix I would very much appreciate it. I have tried: sudo nvidea-xconfig sudo nvidia-settings Then configure TwinView go to save the config... and the error unable to parse xorg.conf file and the error in the console VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf. Undefined Device "null" referenced by Screen "Configured Screen Device" Segmentation fault

  Read the article

• RAID strategy - 8 1TB drives

  - by alex

  I'm setting up a backup storage device- This machine has Windows Server 2008, on a separate boot drive. It has 8x 1TB drives, and uses a hardware RAID card. My question is, which RAID configuration should I go for? Initially, I was going to go with RAID 5 across all 8 drives, however members on serverFault have advised against it. I was just wondering why? Some people have suggested 2 lots of RAID 5 configuration on 4 of the drives, then striping them... I want to maximise the storage space, as this is a backup unit - will store SQL backups, Acronis Images, files, etc... It won't be for public access, so the I/O won't be that high I wouldn't think.

  Read the article

• opening a GUID usb stick in windows 7

  - by altomic

  so I have a mac which I have files on. I put in a GUID formatted usb stick and dropped some files on to it. took the stick and plugged in to my netbook with win7. In Devices & Printers it shows up. It also appears in "safely remove hardware". no actual letter or device when i search for it in other ways. Question - how do I access the files of my GUID usb stick on my windows 7 netbook? thanks

  Read the article

• Load-balance with LAN and Wi-Fi

  - by Synox

  I have a Mac, which runs Mac OS X 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wi-Fi, one can be accessed via LAN. In Mac OS X I can define the priority, which network to choose first. But what I wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused Wi-Fi routers if this would help. Compiling and configuring programs in Linux is no problem for me. Similar question: Load balancing with multiple gateways

  Read the article

• Network randomly drops

  - by user147661

  I have a VPS, ubuntu server 12.04 and for unknown reasons the network connection drops and I have to access my vps via the console and ifdown eth0 and ifup eth0. This brings the connection back up from about a few seconds to a few hours. I have run tail -F /var/log/syslog to monitor the log to see what happens at the point of drop and there is nothing unusual. The vps is running under virt-manager and the hardware is set to virtio. I have had linux friends look at my vps and they are unsure of what is the cause.

  Read the article

• Win7 not detecting external HDD but Ubuntu is detecting. Why?

  - by unlimit

  I have a 500GB Toshiba external HDD. Since yesterday Windows 7 stopped detecting it, however I do see it listed on the "Safely remove hardware and eject media" icon on the taskbar. Then I tried the same external HDD on my Ubuntu and it detected it just fine. Ubuntu and Windows 7 are on the same laptop. I have dual boot. Can someone tell me why is it happening? Am I missing a driver in Windows 7? Additional info: 1. This drive has worked perfectly fine in the past. 2. I did not format this drive ever. 3. It just stopped working yesterday in windows.

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >