Search Results

Search found 30511 results on 1221 pages for 'linux networking'.

Page 204/1221 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• How to get Wifi Working Properly - I am Noob

  - by user287853

  I'm a noob to Ubuntu, but not computers. I installed a full version of Ubuntu version 12 whatever it is. I run it on a machine that has Win7/Win8 on another hard drive. My wireless adapter is some tiny USB stick I got on eBay - it works great in Windows, but I can't get it to work in Ubuntu. More precisely, Ubuntu is providing me a list (sometimes) of wireless networks in the area and when I try to connect to mine it just keeps password prompting me even though the one I use is correct. I looked over all the settings multiple times and don't believe there is anything in error regarding what it takes to connect to my network. So, I thought maybe it is a driver issue and came across NDIS. I thought I should try installing it, but I don't know how when I can't connect the Ubuntu machine to the Internet. I tried some commands to no avail. I have the Ubuntu installation disc and it shows a NDIS common and utils .deb files in there. Can someone out there help me out to get this wireless setup so I can get online?

  Read the article

• How to direct Ubuntu to use USB connection for Internet

  - by t3ch

  Hi folks, I posted yesterday regarding how to configure easytether on Ubuntu. I followed the steps and everything looks good from the terminal. But I am not able to connect to the Internet. Currently I am connected to a Wireless network, I tried disconnecting to it, in hope to connect to Internet using my phone but with no help. How do I make my notebook use my cell phone's connection. I have attached the snapshot from the terminal.

  Read the article

• How should bots be recognised in a game?

  - by Bane

  I'm interested in how bots are usually written. Here's my situation: I plan to make an online 2D mecha game in HTML5, and the server-side will be done with node. It is intended to be multiplayer, but I also want to make bots in case there aren't enough players. How does my game logic see them, as players or as bots? Is there a standard by which I should make them? Also, any general tips and hints will be OK.

  Read the article

• /etc/network/interfaces doesn't always take affect

  - by user1221444

  For some reason my eth0 does not have internet on reboot sometimes. I am using a static ip. I can ping my gateway, but I am unable to ping dns servers, or anything out of my network. It seems that when my internet does work(Usually but just restarting enough times), my /etc/resolv.conf has a nameserver in it. It is empty when I have no internet access. I believe something is overwriting my interfaces settings sometimes on boot. Any help would be appreciated. I am running Ubuntu Server 12.04 64bit /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.213.192.234 netmask 255.255.255.248 network 173.213.192.232 broadcast 173.213.192.239 gateway 173.213.192.233 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.0.0.106 netmask 255.255.255.0 gateway 10.0.0.1

  Read the article

• Sharing an internet connection through the Ethernet port

  - by Bob Cunningham

  I have a small living room PC (Bohica, running fully-updated Ubuntu 10.10/Maverick) connected to my HDTV that I use for web browsing and media streaming. It connects via WiFi (wlan0) to my Fedora server (Snafu) that in turn connects to the internet. I use static addressing, and everything has been working fine. I just got a Blu-ray player, and I'd like to give it wired network access to the internet via Bohica's available wired ethernet port (eth0). So far, I haven't been to get eth0 and the network configured to get the Blu-ray player talking to the internet. Here's my wlan0 configuration: ip4 addr: 192.168.0.100 mask: /24 (255.255.255.0) gateway: 192.168.0.4 (fedora box) The Blu-ray player is set to an IP of 192.168.0.98/24, with the same gateway as above. I want eth0 set to an IP of 192.168.0.99/24, but when I do this using nm-connection-editor I lose internet access (the system tries to use eth0 as the default internet access interface). How do I get my blu-ray player to talk to the internet through Bohica, and do so without disrupting my current (working) network? Thanks. Edit: Here's the relevant output from nm-tool with the Blu-ray player connected: $ nm-tool NetworkManager Tool State: connected - Device: eth0 Type: Wired Driver: forcedeth State: disconnected Default: no HW Address: 90:FB:A6:2C:94:32 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on - Device: wlan0 [wlan0] Type: 802.11 WiFi Driver: ndiswrapper State: connected Default: yes HW Address: 00:26:5A:C0:D0:05 IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.4

  Read the article

• ifconfig not showing all IPs bound to the machine

  - by pankaj sharma

  I have configured multiple IP addresses on a ubuntu box, but when I run ifconfig it shows just one of them. I am able, however, to ping all other adresses assigned to this machine. /etc/network/interface contents: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.202.11 netmask 255.255.255.0 network 192.168.202.0 broadcast 192.168.202.255 gateway 192.168.202.1 # dns-* options are implemented by the resolvconf package, if installed dns-search idil.dz1.da auto eth0:1 iface eth0:1 inet static address 192.168.202.12 netmask 255.255.255.0 auto eth0:2 iface eth0:2 inet static address 192.168.202.13 netmask 255.255.255.0 auto eth0:3 iface eth0:3 inet static address 192.168.202.14 netmask 255.255.255.0 auto eth0:4 iface eth0:4 inet static address 192.168.202.15 netmask 255.255.255.0 auto eth0:5 iface eth0:5 inet static address 192.168.202.16 netmask 255.255.255.0 but the output of the ifconfig is only: 192.168.202.11

  Read the article

• Ubuntu ver 14.04 Network discovery not showing up on windows 8 but on windows 7

  - by Schwabber

  I have an old PC that is now my new Ubuntu machine. Currently I was working on sharing a drive so that backups and streaming could take place. I have it set up perfectly on my windows 7 laptop (able to read and write to it). For some reason however my wife's windows 8 laptop is not showing up on the Ubuntu and vice versa. I turned on network discovery on the win8 machine, but that didn't help. Thanks in advance edit- I have my win7 and win8 in the same homegroup and both can see each other in the network. Also the workgroup is the same.

  Read the article

• Other people's files showing up in rhythmbox

  - by Avery Boyer

  I have my computer connected to a college network, and right now files that belong to other individuals on campus are showing up under Shared in rhythmbox. This is driving me up the wall, I absolutely despise the idea that files are being thrown around on the network and that other people's s*** is showing up on my computer, and that they may be able to see my files as well. This is a very, very serious problem as far as I am concerned and I want to know how I can ensure that I am sharing nothing with the network in the way of files on my computer and that no one else's files are showing up on my computer.

  Read the article

• TCP port are filtered in VirtualBox

  - by iUngi

  I'm running Ubuntu using VirtualBox to test a server application, but I couldn't get it work the communication. I used nmap to check whether the port is open or not: nmap -T4 -n vbip -p 30000 Host is up (0.00061s latency). PORT STATE SERVICE 30000/tcp filtered unknown when I'm checking the port inside the VirtualBox, than the port is open Host is up (0.00061s latency). PORT STATE SERVICE 30000/tcp open unknown I'm using bridge connection, does the VB filter the ports?

  Read the article

• How to rewrite a TCP MMOG server designed to run in a single machine, in a distributed way?

  - by Dokkat

  I have a MMOG server running on C++, using winsockets. My server won't support more than 200 players. I had the idea of redesigning it so it will use multiple servers instead of one, so, maybe, for example, each server could take care of a number of players, and, if it was too laggy, it could transfer the responsability of that player to other server. I'm not sure of how to program a consistent game logic like that, though. Are there techniques for this?

  Read the article

• Would a typical corporate firewall block a Java applet having the following behaviour

  - by auser

  I'm thinking of developing a proxy-like program to forward ports on a remote PC to a local PC (for example SSH). Assume that both local and remote PCs are running behind typical firewalls (i.e. consumer broadband router firewall, Windows firewall or corporate firewalls). The program will be a Java program which the user will run on both the remote and local PC. The remote client will periodically poll a central server to determine whether there are pending client connections. A session could be initiated as follows: The local client contacts the central server and request the current connection details for a specific remote client. The central server responds with the remote server's last received IP address and port. The next time the remote server polls the central server, the client's IP address and port are returned. The remote server initiates a connection to the local client using the IP address and port returned by the central server and listens for a response on a random port. The remote server will pass the value of the port it's listening on to central server. Goto 1, if client fails to connect to server. Would this work or will a typical firewall block the interactions.

  Read the article

• Use two networks at the same time?

  - by Christopher

  I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight

  Read the article

• Duplicate ping response when running Ubuntu as virtual machine (VMWare)

  - by Stonerain

  I have the following setup: My router - 192.168.0.1 My host computer (Windows 7) - 192.168.0.3 And Ubuntu is running as virtual machine on the host. VMWare network settings is Bridged mode. I've modified Ubuntu network settings in /etc/netowrk/interfaces, set the following config: iface eth0 inet static address 192.168.0.220 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 Internet works correctly, I can install packages. But it gets weird if I try to ping something I get this: PING belpak.by (193.232.248.80) 56(84) bytes of data. From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=250 time=17.0 ms 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=249 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=248 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=247 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=246 time=17.0 ms (DUP! ) ^CFrom 192.168.0.1 icmp_seq=2 Time to live exceeded --- belpak.by ping statistics --- 2 packets transmitted, 1 received, +4 duplicates, +6 errors, 50% packet loss, ti me 999ms rtt min/avg/max/mdev = 17.023/17.041/17.048/0.117 ms I think even more interesting are the results of pinging the router itself: stonerain@ubuntu:~$ ping 192.168.0.1 -c 1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. From 192.168.0.3: icmp_seq=1 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=6.64 ms --- 192.168.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 6.644/6.644/6.644/0.000 ms But if I set -c 2: ... 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=253 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) From 192.168.0.3: icmp_seq=2 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=2 ttl=254 time=7.87 ms --- 192.168.0.1 ping statistics --- 2 packets transmitted, 2 received, +256 duplicates, 0% packet loss, time 1002ms rtt min/avg/max/mdev = 6.666/10.141/13.556/2.410 ms Pinging host machine on the other hand works absolutely correctly: no DUPs, no errors. What seems to be the problem and how can I fix it? Thank you.

  Read the article

• Is there a way to disable a particular pci port

  - by mxdog

  I have a MB with 2 nics on it. a switch burned up and took out one of them. there is no way to turn them off individually in the bios. is there a way to turn off one of the ports. unmap it,unbind it, power it down so the system doesnt see it at after boot. they are mapped as 0000:02.08.0 and 0000:02.08.1 I want to turn the second one off somehow. Since they both use the same driver, blacklisting the module will take out both of them. Normally I would just live with it but it seems there should be a way to do that like in windows (gasp)--just disable it. I Actually have the exact same problem on another comp running XCP so this will be a 2fer if it gets figured out. the OS is 12.4 lts server with xen on it. THX

  Read the article

• Problems with microphone and network

  - by AnoonymoouS

  Hello... very good day everybody! I'm having some problems regarding the Ubuntu 12.4.01 LTS. For this reason, cordially i ask everyone's help. Such problems can be summed up in network (01) and audio (02)! 01) I can not set a DSL network settings in the "upper bar" (on side the clock). When i create the connection, the system says that the cables modem are disconnected! I can only use the internet if i set up a connection at terminal through the command "pppoeconf". Follows the print screen of what i mentioned above:. http://i.imgur.com/8nTrF.png Obs.: Note that even after the connection "created", it does not appear there! 02) The sound is reproduced; however, can not be captured! I can not make recordings, obviously i can't use the microphone. I believe that something is giving interference or the settings are wrong! Follows the video of what i mentioned above:. http://dl.dropbox.com/u/41085750/Projeto%20Padr%C3%A3o.mp4 Obs.: I'm listening to music, so that interference errors may appear in the video. By kindness; who can help me... help me! I sought help at various sites and forums but unfortunately, i did not get success. I wait anxiously for a direction. Regards, Anoonymoous.

  Read the article

• Remote connection problem.

  - by Woody

  Hello I have ubuntu 10.04 installed with mysql on it and I have a problem with remote connection. When I connect through putty it works but sometimes it looks like it hangs for example when I execute the command ln --help. Also with MySQL connection When I execute a simple query like show processlist; it works, but for example select * from table not always, if the table doesn't have many rows it works but if it has let's say more than 20 the query looks like it keeps working and never ends. It's connected but I can't do many things remotely. Added: I connect using putty from other windows pc, server is not overloaded. when i work at the same time directly on ubuntu i can do everything. Remotely not.

  Read the article

• The Internet Key Wave MW833UP is not recognized in Ubuntu

  - by gio900

  I can't use my Onda MW833UP... :( Any advice? Here is something that someone else may understand: ~$: lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric ~$: lsusb Bus 001 Device 005: ID 1ee8:0012 ~$: dmesg [ 22.709475] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 22.714856] usbcore: registered new interface driver cdc_acm [ 22.714866] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 23.520490] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 24.244530] usbcore: registered new interface driver usbserial [ 24.244575] USB Serial support registered for generic [ 24.244673] usbcore: registered new interface driver usbserial_generic [ 24.244681] usbserial: USB Serial Driver core [ 24.265879] USB Serial support registered for GSM modem (1-port) [ 24.285680] usbcore: registered new interface driver option [ 24.285691] option: v0.7.2:USB Driver for GSM modems [ 24.425878] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=600 [ 24.736540] EXT4-fs (sda8): re-mounted. Opts: commit=600 [ 35.705796] Easy slow down manager: checking for SABI support. [ 35.706002] Easy slow down manager: SABI is supported (f5189) [ 36.060099] usbcore: deregistering interface driver uvcvideo [ 139.508061] CE: hpet increased min_delta_ns to 20113 nsec [ 6798.378917] usb 1-1: USB disconnect, device number 5 [ 6809.108232] usb 1-1: new high speed USB device number 6 using ehci_hcd [ 6809.242692] scsi5 : usb-storage 1-1:1.0 [ 6810.241257] scsi 5:0:0:0: CD-ROM Onda Datacard CD-ROM 0001 PQ: 0 ANSI: 0 [ 6810.241841] scsi 5:0:0:1: Direct-Access Onda Storage 0001 PQ: 0 ANSI: 0 [ 6810.271410] sr0: scsi3-mmc drive: 0x/0x caddy [ 6810.272099] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 6810.272852] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 6810.279954] sd 5:0:0:1: [sdb] Attached SCSI removable disk [ 6810.281210] sd 5:0:0:1: Attached scsi generic sg2 type 0 [ 6810.380591] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.380617] sr: Sense Key : Hardware Error [current] [ 6810.380625] sr: Add. Sense: No additional sense information [ 6810.613937] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.613972] sr: Sense Key : Hardware Error [current] [ 6810.613984] sr: Add. Sense: No additional sense information [ 6810.673716] usb 1-1: USB disconnect, device number 6 [ 6815.572142] usb 1-1: new high speed USB device number 7 using ehci_hcd [ 6815.706828] cdc_acm 1-1:1.0: ttyACM0: USB ACM device The last 3 lines are where I inserted the Internet key, then reconnected it. usb-device T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1ee8 ProdID=0012 Rev=00.01 S: Manufacturer=Onda S: Product=MW833UP S: SerialNumber=9230B35D870F9CB7AE684EACC5C12BE5EC33B26E C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm Then there is /dev/ttyACM0. When the key is connected to the USB port, everything that will meant...

  Read the article

• Sending state diffs (deltas) and unreliable connections

  - by spaceOwl

  We're building a realtime multiplayer game, in which each player is responsible for reporting its state on every iteration of the game loop. The state updates are broadcasted using unreliable UDP. To minimize state data sending, we've come up with a system that will send only deltas (whatever state data that was changed). This method however is flawed, since a lost packet will mean that other players will not receive the delta, making the game behave in an unexpected way. For example: Assume that state is comprised of: { positionX, positionY, health } Frame 1 - positionX changed --> send a packet with positionX only. Frame 2 - health changed // lost ! Frame 3 - positionY changed --> send a packet with positionY only. // Other players don't know about health change. How can one overcome this issue then? sending the entire data is not always feasible.

  Read the article

• VM can't ping LAN name but sees it via nslookup

  - by amphibient

  I am trying to connect to a network resource from my 10.04.4 VM (VMware Fusion) but the destination is unreachable by name. What is weird is that the name is visible in DNS: >nslookup my.name Server: 123.45.67.89 Address: 123.45.67.89#53 Non-authoritative answer: Name: my.name Address: 10.20.30.40 I can reach it (via ping) by the IP address (10.20.30.40) but not the name and I thought that was weird because the DNS clearly resolves the name. What can I do to enable access to this resource via the name?

  Read the article

• Ubuntu 12.10 - VirtualBox not sharing internet with guest system

  - by Fernando Briano

  I went from ArchLinux to Ubuntu on my dev box. I use VirtualBox to test web sites on Windows and IE. I have my Windows 7 VirtualBox image running on Ubuntu's VirtualBox. Back with ArchLinux, internet worked "out of the box" on the Windows boxes. I left the default options on the box's Network Options (NAT). The Windows machine shows as "connected to ethernet" but reports: The dns server isn't responding So I can't access Internet from there. I tried searching for Ubuntu's official docs but they seem pretty outdated. I tried using my old boxes from Arch (which boot normally but have no internet) and creating a new box from Ubuntu itself, but still get the same results. Update: I'm using VirtualBox 4.1.18 from Ubuntu's repository (apt-get install virtualbox).

  Read the article

• Troubleshooting VMware on Ubuntu

  Summary of different problems while using VMware products on Ubuntu. This article is going to be updated from time to time with new information about running VMware products more or less smoothly on Ubuntu. Following are links to existing articles: Running VMware Player on Linux (xubuntu Hardy Heron) Running VMware Server on Linux (version 1.0.6 on xubuntu) Using ext4 in VMware machine   VMware mouse grab/ungrab problem (Source: LinuxInsight) Upgrading GTK library in Ubuntu since Karmic Koala gives you a strange mouse behaviour. Even if you have "Grab when cursor enters window" option set, VMware won't grab your pointer when you move mouse into the VMware window. Also, if you use Ctrl-G to capture the pointer, VMware window will release it as soon as you move mouse around a little bit. Quite annoying behavior... Fortunately, there's a simple workaround that can fix things until VMware resolves incompatibilities with the new GTK library. VMware Workstation ships with many standard libraries including libgtk, so the only thing you need to do is to force it to use it's own versions. The simplest way to do that is to add the following line to the end of the /etc/vmware/bootstrap configuration file and restart the Workstation. export VMWARE_USE_SHIPPED_GTK="force" The interface will look slightly odd, because older version of GTK is being used, but at least it will work properly. Note: After upgrading a new Linux kernel, it is necessary to compile the VMware modules, this requires to temporarily comment the export line in /etc/vmware/bootstrap.

  Read the article

• wireless card not detected

  - by user281219

  i have a old HP Compaq NX6125 with a new lunbuntu 14.04 32 bits install , but the wireless card is not working I have already done this steps and the wireless leds on the laptop are on but can't see any where the wireless interface , cloud`t do the last two steps . sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer b43-fwcutter Then Reboot And you need to activate the card from settings/network/wireless make it ON After this search for wireless icon at the task bar and look for your wifi. lshw -class network: *-network:0 description: Ethernet interface product: NetXtreme BCM5788 Gigabit Ethernet vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:02:01.0 logical name: eth0 version: 03 serial: 00:0f:b0:f7:d1:0f size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.134 duplex=full firmware=5788-v3.26 ip=192.168.1.120 latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:23 memory:d0000000-d000ffff *-network:1 description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:22 memory:d0010000-d0011fff *-network description: Wireless interface physical id: 1 logical name: wlan2 serial: 00:14:a5:77:9e:10 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.13.0-29-generic firmware=666.2 link=no multicast=yes wireless=IEEE 802.11bg

  Read the article

• Wired connection problem through router

  - by tommypincha

  I'm having trouble to connect my Ubuntu 11.10 to internet through ethernet. I installed a router to get Wi-Fi and now (by a wired connection) I can't have internet with ubuntu (but I can with Windows 7). I see several attempts per minute of the network-manager to get a connection, but after a minute it stops trying. Here are a couple of outputs from key files: cat /etc/network/interfaces auto lo iface lo inet loopback and ifconfig -a eth0 Link encap:Ethernet HWaddr 00:16:76:e4:a6:e8 inet6 addr: fe80::216:76ff:fee4:a6e8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:117 dropped:0 overruns:0 frame:117 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:12221 (12.2 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:582 errors:0 dropped:0 overruns:0 frame:0 TX packets:582 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:46024 (46.0 KB) TX bytes:46024 (46.0 KB) I tried reconnecting the modem and the router and reconnecting the ethernet cable but nothing... I tried other solutions from other posts (this one has a similar issue Wired connection not working) but again nothing. My IP is dynamic. A couple of things I see and did: I see no inet addr, only inet6. I ignored ipv6 from the internet connections, and restarted the network-manager service and nothing. A difference with the post I mentioned is the RX packets with errors I have, is this a clue of the problem? Any help would be appreciated, Thanks!

  Read the article

• Network setup not working. Can't connect to the Internet in Ubuntu

  - by Clint Eastwood

  I want to know how to set-up network in 12.04 using automatic settings (DHCP). I installed Ubuntu, but I can't seen to see the network connection. What can I do? My notebook has no wireless only cable. The cable will not fit in. How can I plug it in? Do I need a special Cable? There is no router can I fix this myself, or should I call a technician? Also can I use USB to connect to the network/Internet? please can you help Thank you jamel

  Read the article

• Wireless not connecting on Ubuntu 13.10, Toshiba Satellite pro L 650

  - by user204842

  I have just installed Ubuntu 13.10 on my Toshiba Satellite Pro L650. After several reboots, installing/ uninstalling the broadcom driver I still can't connect. It detects the wi fi signals and the icon flashes as if it's trying to connect but never actually does. I'm really quite rubbish with code and stuff, but I really like Ubuntu as an OS and would really appreciate any suggestions anyone can offer! 02:00.0 Ethernet controller: Qualcomm Atheros AR8151 v1.0 Gigabit Ethernet (rev c0) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >